List of Preferred

Technologies and Equipment

As revised on May 19, 2016

INTRODUCTION

The policy of transparency of the Russian economy stimulates close technological cooperation between

the Russian fuel and energy industry and the domestic and International companies based on the

principles of competition and best solutions.

Amid economic and technological sanctions imposed on Russia, logistical safety becomes a key issue for

Russian oil and gas companies, that is, unimpeded access to the technologies, products and services

required for the flawless functioning of all business processes. Unimpeded access means access to the

products manufactured in the Russian Federation.

Logistical safety for oil companies creates a window of opportunities, that is, two new incentives for

suppliers. The first incentive is for the Russian industry to ensure the supply of new competitive

domestic articles for the fuel and energy sector. The second incentive is for International companies to

considerably localize their operations and R&D activities inside Russia acting either independently, or in

cooperation with Russian industrial or R&D partners.

Gazprom Neft PJSC is at the forefront of supporting the development and application of high-tech

products by Russian industry, as well as supporting full-scale localization of International industry

leaders in Russia.

To ensure early access of high-tech products produced in Russia into Gazprom Neft PJSC logistical

system, Technological Partnerships and Import Substitution Department was organized as part of

Purchasing and Capital Construction Directorate. The Department supports International companies in

localizing their operations in Russia, and it supports Russian companies in their development of new

items for the fuel and energy sector.

This document provides the areas in which the Technological Partnerships and Import Substitution

Department is ready for close cooperation with vendors.

CONTENTS

INTRODUCTION

CONTENTS

EXPLORATION AND PRODUCTION

OIL REFINING

POWER ENGINEERING

BUSINESS APPLICATIONS

AUTOMATION TOOLS

IT INFRASTRUCTURE

SERVICE VESSELS

CONTACTS

EXPLORATION AND PRODUCTION

Pos. No. Description and technical specifications of product (for example, diameters, pressure range, temperature range, capacity etc.)

Hi-Tech equipment to support drilling

1 Rotary Steerable Systems (RSS) (3 sizes: 120 mm, 170 mm and 210 mm)

- Automated control of the trajectory (angle maintenance); - Possibility to measure inclination angle in real time;

(permitted variance: 0.1 gr.)

2 Measurement While Drilling (MWD) tools (Sizes: 89-102 mm, 120 mm, 170 mm, 210 mm)

- Data transfer rate: over 3 bps; - Possibility to control inclination angle in real time

(Permitted variance: 0.1 gr.) - Providing power to LWD tools as part of the assembly (min 110 W); - Equipment with gamma-logging sensor.

3 EPT resistivity logging (LWD) tools (3 sizes: 120 mm, 170 mm and 210 mm)

- At least 4 tools; - Vertical resolution ca. 30 cm; - Measurement inaccuracy: max. 5%; - Rugosity compensation.

4 Resistivity laterlog tools (LWD) (2 sizes: 120 mm and 170 mm)

- Vertical resolution: 10 mm; - Permissible inaccuracy in adaptive environment: 5% - Possibility of azimuth logging methods

(including Image).

5 Neutron density logging (LWD) (2 sizes: 120 mm and 170 mm)

- Resolution of Density logging: min 15 cm; - Permissible inaccuracy of Density logging: 0.015 g/cm3; - Possibility of azimuth logging methods (including Image); - Resolution of Neutron logging: ca. 30 cm; - Permissible inaccuracy of Neutron logging: 5%.

6 Logging while drilling tool (LWD) (2 sizes: 120 mm and 170 mm) - quadrupole acoustic logging (equipped with multipole broadband emitter) - the possibility of registering p-waves, s-waves, and Stoneley waves

Drilling Muds

7 Biopolymer for preparing highly inhibited fluids without solids

8 Reversible oil-based drilling fluids

Rock cutting tools, drilling tools 9 Non-magnetic drill collars

- 89-102 mm - 171 mm (6.75" NMDC (З-133М х З-133Н)

- 203 mm (8" NMDC (З-152М х З-152Н) - 241 mm (9.5" NMDC (З-177М х З-177Н)

10 Drill strings - 139.7 x 10.54 S135LT IEU 171.4_101.6 (combined landing) 18 right, the recommended maximum makeup torque - up to 80 kNm, with two stop faces (with API Spec 7 connections, not interchangeable) - 127.0 x 9.19 S135LT IEU 165.1_95.2 (combined landing) 18 right, the recommended maximum makeup torque - up to 70 kNm, two stop faces (with API Spec 7 connections, not interchangeable) - 88.9 x 9.35 G105S EU 120.7_68.3 (external landing) 18 right, the recommended maximum makeup torque - up to 30 kNm, with two stop faces (with API Spec 7 connections, not interchangeable) (Requirements: 1) Drill strings are manufactured in cold-resistant version (139.7 x 10.54 mm, 127.0 x 9.19 mm), API standard - Spec. 5DP and NS-1. 2) The joints of drill pipes to be reinforced by hard coating to prevent wear on the casing when working in cased hole, and wear of the outer diameter of the joint in the open hole, ensuring the absence of cracking and peeling of the reinforcing layer in the temperature difference. 3) The thread of the drill joints should be phosphatized. 4) The space for a wrench on the coupling of the tool joint - at least 15 inches, on the nipple part - at least 10 inches. 5) Drill pipes with special inner plastic coating. 6) The length of the inner transitional zone for combined landing should be at least four inches. 7) Drill pipes must have joints with two stop faces. 8) The recommended maximum makeup torque should be estimated on the basis of 60% of the minimum torsional yield point of the tool joint. 9) The tolerance on wall thickness for drill pipes should be at least 95% of the nominal value. 10) The length of drill pipes - 9.45 meters (+/- 0.15 m)

11 Circulating Sub of PBL type Diameter: 120 mm, 172 mm

12

Drill collars - Drill collar - 241.3 x 82.6 4145H - with recesses for elevator and drive pipe ring with relief grooves (nipple, coupling) Profile 7 5/8 API Reg. (B-177), right - Drill collar - 203.2 x 71.4 4145H - with recesses for elevator and drive pipe ring with relief grooves (nipple, coupling) Profile 6 5/8 API Reg. (B-152), right (balanced with spiral grooves with recesses for elevator and a drive pipe ring with relief grooves (nipple, coupling) in cold resistance version according to API Spec. 7 (40th edition, 2001) and NS-1 standards. Additionally, the thread must be cold rolled. Length - 9.45 m (+/- 0.15 m)

Downhole equipment, Christmas tree

13 Casings - 508 and 762 mm (with LINX type quick-release coupling) - 473.1 mm, wall thickness - 11.05, coupling type, K55LT Batress thread, seamless, in cold-resistant version, dopeless coating technology, lengths group R2-R3 (max 13.2 m) for API-Spec.5-ST, 3rd edition PSL -1s with combined safety threaded protectors - 339.7 mm, wall thickness - 10.92, coupling type, L80LT Premium class, gas proof (metal-to-metal seal), seamless, cold-resistant version, dopeless coating technology, lengths group R2-R3 (max 13,2 m) by API -Spec.5-ST 3rd edition PSL-2 or GOST 53366-2009 with combined threaded safety protectors - 244.5 mm, wall thickness - 11,05 L80SS coupling type, Premium class, gas proof (metal-to-metal seal), high-torque with a torque value of 60 kNm - 168.3 mm, wall thickness - 8.94, coupling type, L80SS Premium class, gas proof (metal-to-metal seal) (244.5 and 168.3 mm seamless, sour gas resistant version (for hydrogen sulfide partial pressure conditions in excess of 1.5 MPa), dopeless coating technology, lengths group R2-R3 (max 13.2m) for the API-Spec.5-ST 3rd edition of PSL-2 or GOST R 53366-2009 with combined threaded safety protectors).

14 Centralizers for casing - 473.1 mm - 339.7 mm - 244.5 mm - 168.3 mm (Sintec type - for reducing the friction coefficient)

15 Roller centralizers for drill pipe - 127 mm - 139.7 mm (for operation in the 244.5 mm casing)

16 Tubing (DN-139.7 x 7.72 mm; 114.3 x 6.88 mm), strength group L 80 SS, with threaded gas proof connections of Premium class for use in environments with a high content of H2S and CO2

17 Christmas tree, complete with casing head SMC type, designed for pressure of 35 MPa, with a penetrator, stop valves with hydraulic control and redundant manual isolation valves. The upper part of the Christmas tree should have a quick-connection with a high-pressure riser of 18 ¾'' for BOP and to ensure safety during workover

18 Downhole equipment for upper completion assembly of a production well including packer equipment, safety valves, bottom-hole check valves, submersible units of electric pumps (ESPs with capacity of 1200 -2500 m3 / day) with a high-precision submersible telemetry system, including a bypass system (Y-Tool), an oil cable, cable protectors and test control lines protectors, and packer penetrators

19 Downhole equipment for upper completion assembly of an injection well including packer equipment, a safety valve, and accessories

Services in exploration 20 Continuous study of horizontal wells using fiber optic systems

21 Extended logging complex

22 A downhole tractor to perform studies in the horizontal sections of wells

Well completion 23 Well completion equipment

(For wells with a length of the horizontal section of over 1000 meters, for multi-stage hydraulic fracturing – for more than 10 jobs, liner diameter of 102 mm and 114 mm)

24 Hydraulic fracturing fleets

25 Coil tubing

Process equipment for floating drilling rigs and drilling ships 26 Jack-up rig

With a full complex of drilling equipment. Jack-up rig, winterized, equipped with a full complex of modern drilling and auxiliary equipment. Load on deck: not less than 3,500 tons. Drilling depth: 5,000 m.

27 A seismic vessel With a capability to run 3D seismic

28 Drilling rig with a complex of equipment (Including lifting devices for feeding pipes, the RIH/POOH system, high pressure drilling manifold for 1,050 atm. with isolation valves (with an internal diameter of 100 mm)

29 Low-pressure drilling mud system

30 Blowout preventing equipment system (BOP) 1,050 atm. BOP (Universal, built-in) with a manifold and killing and choking blocks

31 BOP transfer system

32 Cement complex system

33 The system of pneumatic conveying of bulk materials

34 Electrical equipment of drilling facilities

35 Top drive Load capacity: 500 t, P = 70 MPa, 750 tons, with a working point of 100 kN at 700 atm.

36 Slurry makeup and injection system

37 Remote burner boom for special marine operating conditions Length: 16.0 m Weight: 5,000-5,500 kg Wind Speed: up to 45 m / s Operating temperature: -20˚C to +100 ˚C Gas, oil, water line 3", air line 4"

38 Increased power burner for smokeless combustion of petroleum products with an oil ignition system Service - H2S; heads - multihead; operating pressure - 20 bar; maximum capacity at design pressure - up to 2,000 m3 / day; the minimum operating temperature - minus 20°C; oil and water inlet - 3", air - 4"; water screen capacity - up to 2,000 m3 / day; weight 1,000-1,200 kg.

39 A complex of surface mobile testing equipment for use in winter conditions under marine standards, hydrogen sulfide- (up 6%) and sour-type versions. Wellhead Christmas tree Pop = 70 MPa, nominal flow diameter – 76.2 mm, 3 valves +1 hydraulic valve; lubricator set (3 sections) with a preventer and a gland assembly, Pop = 70 MPa; marine cable-rope unit, version of Zone 2 with a wire, hydrogen-sulphide-type version; Coflexip-type hose, 21 m, 70 MPa; wellhead valve for emergency shut-in; emergency shut-in system; choke manifold with data collection manifold, Pop = 70 MPa, 3 inches; air pump for dosing of chemicals, Pop/output = 82 MPa; indirect steam heat exchanger, Pop = 70 MPa, throughput – 4.3 MMBtu / hour, weight - 12-15 tons; a horizontal 3-phase separator, Pop = 100 bar, oil and water throughput - up to 1,500 m3 / day, and gas throughput – up to 1.5 million m3 / day; vertical measuring container for 2 compartments of 16 m3 and Pop = 1 MPa; centrifugal pump with the capacity of up to 2,100 m3 / day at an operating pressure of 2.1 MPa; oil and gas manifolds with inner diameter of 76.2 mm, Pop = 10 MPa; piping sets, and flexible knees (quick-release), low-pressure 3" and 4" for the operating pressure of 17.0 MPa and 15.6; piping kits and flexible knees (quick-release), high pressure 3", for the operating pressure of 69 MPa; mobile field well test laboratory equipped with an automated data collection system, dimensions – 20-foot standard shipping container; air compressor with the capacity of 21 m3 / min, weight - 6-7 tons, operating pressure - 1 MPa; steam generator with the capacity of 4.3 MMBtu / hr.

40 A set of full-bore downhole test equipment controlled by annulus pressure, high cycle, hydrogen sulfide (up 6%) and sour-type version Operating differential pressure - 70 MPa, outer diameter - 127 mm; inner diameter - not less than 57 mm; friction block for 168, 178, and 244.5 mm casings. A standard formation tester set: packer, safe sub, multi-cycle test valve, high-cycle circulating valve, shear valve for pressure testing of test strings, shear emergency shut-off valve, radioactive sub, shear circulation valve, telescopic connection with a stroke of 150 cm; field workshop for a formation tester set on the basis of a 20-foot sea container; pressure gauge holder for 3-4 slots, pipe pressure record under the valve, above the valve and in the annulus, 69 MPa, outer / inner diameter = 127/57 mm

41 Bottom casing hanger system FMC SD-1: Diameters of tied strings: 762 mm, 508 mm, 340 mm, 245 mm, 178 mm. Working pressure: 68.9 MPa. Operating temperature: from -29˚C to +121˚C. Working in corrosive environment.

42 Sampling equipment - A depth holder of samplers, ext. diam. not less than 57 mm, 4 slots - Downhole samplers - A cylinder for standard transportation and storage of 600-ml samples, 103 MPa, 200˚, the service – acidic - A cylinder for gas samples with a capacity of 20 liters, Pop = 20 MPa, the service – acidic - A cylinder for transportation and storage of a 600-ml sample, 103 MPa with nitrogen pressure compensation - A single-phase 600-ml formation fluid sampler, 103 MPa, 200˚, the service - acidic - A single-phase 600-ml formation fluid sampler, 103 MPa, 200˚, the service - acidic, with nitric compensation - A field device for the transfer of samples.

43 Monobloc casing head of Unihead type Assembled FMC UH-1. Maximum operating pressure (top of casings head): 69 MPa. Maximum operating pressure (the central part of casings head) - 34.5 MPa. Maximum operating pressure (the bottom part of casings head): 20.7 MPa. Working in corrosive environment. Class of material according to API: DD-0.5. Nominal diameter of tied strings: 340 mm x 245 mm x 178 mm. Nominal diameter of lateral drains: 52 mm. Operating temperature: from -60˚C to +121˚C. Weight: 3,957 kg.

44 Casing head 20 3/4" Assembled FMC C-22-EG. Maximum operating pressure: 20.7-70 MPa. Working in corrosive environment Class of material according to API: DD Nominal diameter of tied strings: 508 mm Nominal diameter of lateral drains: 52 mm Operating temperature: from -60˚C to + 121˚C Weight: 1,525 kg

45 Oil shipment hoses, COUPON system 14" and 20" hoses set. Inner diameters - 14'', 20''. Lengths: 7.6 m; 9.3 m; 12.2 m. Nominal working pressure - 15 bar. Ambient temperature: -35 ... + 52 ° C.

46 Load lifting deck cranes (electrohydraulic)

47 Set of direct oil shipment units

48 Seawater pumps 45100-2, 8х10х21А OHH

49 Submersible centrifugal pumps (for DF pumping)

50 Oily water pumps

51 Pumps for coolant circulation

52 Screw air compressors (low pressure)

53 Automated control and safety system of an offshore ice-resistant fixed platform (On the basis of a measurement and control system)

54 Stationary gas analyzers

55 Portable gas analyzers

56 Fire detectors

57 Pressure/differential pressure transmitter

58 Temperature transmitter

59 Underwater wellhead equipment of SSMC type

60 Level meter

61 Flow meters

Equipment for collecting products 62 Block oil pumping stations

63 Screw vacuum compressors running on associated gas with a high content of hydrocarbons Q = 30 thousand m3/day Pinput = 0 kgf / cm2

64 High performance piston gas compressor systems running on APG Q ≥ 400 thousand m3 / day Poutput ≥ 4 MPa

65 Centrifugal gas compressor units with gas turbine drive with a high degree of compression working on APG, including with hydrogen sulphide content Q ≥ 4,000 thousand m3 / day Poutput ≥ 20 MPa

66 Pipelines heating

Control valves for piping 67 Blow-off valves of a gas-compressor unit

68 High-precision control valves operating with a large pressure drop

69 Instantaneous shut-off valves Speed ≤1 second

Driven equipment 70 Electric drives for shutoff and control valves

(“smart class”)

OIL REFINING

Line Item

Product name, specifications (for example, diameters, pressure, temperature, power, etc.)

Additives for fuels 1 Complex depressant-dispersant additives to diesel fuel

2 Anti-static additive to diesel fuel

3 Lubricating additive to TC-1 hydrotreated component

4 Antifoam additive

5 Hydrogen sulfide absorber for fuel oil

Reagents 6 Demulsifying agent

7 Corrosion inhibitor

8 Neutralizer

9 To remove the benzene-toluene fraction

10 Adsorbent for paraxylene extraction

11 Dimethyl disulfide for sulfidation process

12 Emulsifiers (surfactants) for preparation of bitumen emulsion

13 Reagents for water recycling unit on the nitrogen production unit

14 Reagents for water treatment unit on the nitrogen production unit

15 Reagent for chemical water treatment unit with the desalinated water production block

16 Reagent for chemical water treatment unit with the desalinated water production block

17 Reagents for boiler

18 Reagents for water block

The catalysts for refining and petrochemicals 19 Catalysts for hydrotreating of CCG, DF, VGO

20 Catalytic reforming process catalysts

21 Isomerization process catalysts

22 Catalysts for hydrogen production

23 Catalysts for production processes of MTBE, TAME

24 Catalysts for sulfur plants (Claus process)

25 Xylene isomerization catalysts

26 The catalysts for catalytic transalkylation of aromatic hydrocarbons

27 Dewaxing catalysts

Adsorbents 28 Chlorine absorber

29 Adsorbents for aromatic hydrocarbons production plants

30 Adsorption removal of para-xylene

31 The adsorbent, cleaning of benzene-toluene fraction

32 PSA adsorbent

Vessel internals 33 Internals of hydrocracking columns

34 Internals of sulfur recovery unit

35 Internals of amine regeneration tower

36 Internals of process condensate stripping tower

37 Internals of hydrocracking reactors

38 Internals of hydrotreating reactors

39 Internals of isomerization reactors

40 Internals of reforming reactors

Plate heat exchangers 41 Plate heat exchanger

Pump-and-compressor equipment 42 Pump units, manufactured according to API 610 standard

43 Piston compressors, manufactured according to API 618 standard

44 Centrifugal compressor units manufactured according to API 617 standard

45 Screw compressor units, manufactured according to API 619 standard

46 Circulation isomerization compressor Centrifugal-type, capacity: 49,700 nm3 / h, Pinput = 1.8 MPa; Poutput = 2.36 MPa Power consumption: 688 kW

47 Circulation hydrotreating compressor Piston-type, capacity: 3,900 nm3 / h, Pinput = 2.7 MPa Poutput = 3.17 MPa Power consumption: 26.3 kW

48 Fresh gas compressor Piston-type, capacity: 1.1 * 57,200 nm3 / h, operating pressure: 9.14 MPa Power consumption: 2.05 MW

49 Circulating gas compressor Piston-type, capacity: 185,500 nm3 / hour Operating pressure: 9.14 MPa Power consumption: 1.70 MW

50 Piston compressor Pinput = 5.47 MPa Poutput = 8.44 MPa Shaft power: 1.7 MW

51 Piston compressor Pinput = 5.47 MPa Poutput = 8.44 MPa Shaft power: 1.7 MW

52 Piston compressor Number of compression stages – 2 Pinput = 0.15 MPa Poutput = 1.82 MPa

POWER ENGINEERING

Line Item

Product name, specifications (for example, diameters, pressure, temperature, power, etc.)

Power generation 1 Gas-piston power generating sets

(the set includes: an internal combustion engine, a generator, an ignition and fuel supply system, an automatic control system including field and average level, the cooling system), rated power: over 500 kW

2 Gas turbine electric plant (the set includes: industrial gas turbine engine (not the aircraft type), a generator, an automatic control system including field and average level, a clutch, a cooling system) Pnom: over 16 MW

3 Screw compressors (booster unit) for compressing fuel gas to supply to the gas turbine

Electrical equipment 4 Cable products

5 Frequency inverters

6 Power distribution systems

7 Explosion-proof motors

BUSINESS APPLICATIONS

Pos. No. Functionality groups of business applications

EXPLORATION AND PRODUCTION

130 Basin modeling - Basin modeling; - G&G data acquisition and storage; - Dimensional (geologic information) analysis

131 Seismic and geophysical survey - Geophysical modeling; - Acquisition and storage of G&G data; - Dimensional (geologic information) analysis; - Data processing and analysis system; - Seismic processing and interpretation.

132 Conceptual geological modeling. Reserves estimation - Geophysical modeling; - G&G data acquisition and storage; - Dimensional (geologic information) analysis; - Data processing and analysis system; - Seismic processing and interpretation

133 Support to drilling - Rock mechanics modeling

134 Reservoir management - G&G data acquisition and storage; - Reservoir simulation; - Hydrofrac designing and efficiency analysis;

OIL REFINING AND SALES

135 Retail site management Retail space equipment: POS (Point of sales):

Cash desk workstation;

Touch-screen monitor;

Bar code scanner; user's display;

Customer card service terminal;

Card reader for user authorization. BOS (Back Office system):

Workstation;

Spill-resistant BOS keyboard with a card reader;

Bar code scanner;

Data acquisition terminal. A controller to interface Retail Site Management system with fuel dispenser RWS terminal.

AUTOMATION TOOLS

Pos. No. Functionality groups of Automation Tools

Pressure 136 Pressure transducers (absolute and overpressure) with output signals

4…20mA+HART/Foundation FieldBus

137 Pressure-difference transducers with the output signals 4…20mA+HART/Foundation FieldBus

138 Process pressure gauges (pressure indicators)

139 Thermistors - Rating Pt100 - Rating 50M - Rating 100M

140 Thermoelectric temperature transducers:

- Rating L

- Rating K

- Rating S

- Rating B

- Multi-zonal, all rates 141 Normalizing transducers for temperature sensors, i.e., external indicators of

measured values: With output signal 4…20 mA+HART; With the output signal Foundation FieldBus.

142 143

Normalizing transducers for temperature sensors, i.e., external indicators of measured values: With output signals 4…20 mA+HART; With the output signal Foundation FieldBus. Level alarms:

- Vibration; - Capacitive; - Microwave; - Radioisotope; - Magnetic; - Buoy.

144 Level meters With the output signals 4…20 mA+HART / Foundation FieldBus: - Radar; - Rope (rod-type); - Ultrasonic; - Capacitive; - Buoy; - Tape (servo-type); - Magnetic.

145

Flow meters with the output signals 4…20 mA+HART / Foundation FieldBus: - Electromagnetic; - Ultrasonic; - Coriolis (mass flow) meter;

146 147 148 149 150

- Vortex; - Thermometric; - Orifice pressure-differential flow meter; - Pressure-differential flow meters based on Pitot tube.

Variable area flow meters Orifice plates and valve assemblies pH-meters Conductivity meters Density gauges

151 152 153

Dissolved oxygen analyzers Platform scales Railweight units (weighting bridges)

- Dynamic; - Static.

154 155 156 157 158

Motor-truck scales Control valves with electric drive and control via 4…20 mA+HART / Foundation FieldBus:

- Disk valves; - Ball valves; - Single-seat; - Segmental.

Control valves with air drive and control via 4…20 mA+HART / Foundation FieldBus:

- Disk valves; - Ball valves; - Single-seat; - Segmental.

Isolating (cut-off) valves with air drive and solenoid 24 VDC: - Disk valves; - Ball valves; - Single-seat; - Segmental.

Systems for the weighting of crude and oil products in tank farms

159 160

Pre-explosive concentration alarms and maximum allowable concentration alarms Flue gas CO and O2 analyzers

161 162 163

Flame sensors PLC for DCS PLC for ESD PLC of package units (e.g., compressors) and auxiliary units

165 Vibration monitoring systems

166 167 168 169

Remote input/output modules Spark-proof barriers Switching gear 24 VDC power supply units

170

Uninterrupted power supply (UPS) systems

171 172 173 174

Junction boxes Instrumentation cabinets (field location) Advanced process control systems Computer-aided simulators for process operators

175 Laboratory IT systems (LITS)

176 177

Manufacturing execution systems (MES) Real-time databases

IT INFRASTRUCTURE

Pos. No. IT infrastructure Functionality groups

COMMUNICATIONS

178 Baseband equipment and access equipment

179 180 181

VPN gateways Firewalls Videoconferencing equipment

182 183 184

IP telephony equipment Mobile tracking communications Satellite radio voice communication

COMPUTING SYSTEMS

185 Server equipment

186 187 188 189

Data storage systems (DSS) Cross-connect equipment of data storage network Data backup systems (e.g., hardware and software packages including: control software, specialized DSS, tape library); Equipment for Workstations:

- A personal computer (laptop); - Lean client.

190 191 192

General system software:

Operating system;

Common Directory Service Virtualization software:

Virtualization of network equipment;

Virtualization of workstations;

Virtualization of applications Load balancing devices

193 Software for infrastructure services:

E-mail;

Unified communications services;

DNS service;

Remote Corporate LAN access service;

Print control

194 195

Database Management Systems (DBMS) DBMS analogs:

Oracle Database (11g, 12c);

MS SQL Server (2008R2, 2012, 2014);

IBM DB2 (9.5, 9.7, 10.1, 10.5);

SAP MaxDB (7.8, 7.9);

SAP HANA DB SPS10

IT Infrastructure and services monitoring systems:

Server software;

Monitoring software agents;

Probes (sensors).

SERVICE VESSELS

Pos. No. Description and technical specifications of the products

GENERAL REQUIREMENTS

- It should be marine equipment certified by a classification society who is a IACS member; - The equipment shall comply with applicable International conventions (e.g., SOLAS,

MARPOL etc.) for installation on board a vessel; - The economic and energy efficiency of the equipment should match the best International

analogs; - The equipment should have a superior level of automation; - External nodes of the equipment should be designed and able to operate under subzero

temperatures of ambient air; - Weight and size characteristics of the equipment should be close to those of International

analogs; - The design and components of the equipment should ensure long time between

maintenance; - At least 25 years' service life.

COMPONENTS FOR THE CONSTRUCTION OF SERVICE VESSELS

Propulsion systems

196 Four-stroke ship engines - Rated capacity: 2200-4600 kW; - Crankshaft speed: 750 rpm; - Specific fuel rate: ca. 185 g/kWh; - Operational life: min. 12,000 hours before overhaul and min. 60,000 before

turnaround; - Compliance with Annex VI MARPOL 73/78.

197 Four-stroke ship engines - Rated capacity: 500-1200 kW; - Crankshaft speed: 1000-750 rpm; - Specific fuel rate: ca. 220-190 g/kWh; - Operational life: min. 8,000 hours before overhaul and min. 30,000 before

turnaround; Compliance with Annex VI MARPOL 73/78.

198 Emergency diesel generators - Capacity: 200-400 kW

199 Controllable pitch propellers Rated capacity: 3,000 – 9,000 kW

200 Azimuth-type adjustable propulsion-steering thrusters Capacity: 2,500-9,000 kW; ice class: Arc 5 – Icebreaker 7

Ship systems

201 202 203

Auxiliary boiler units (water) - Pressure: 0.7 MPa; - Evaporation: 2.5-6.5 tph; - Boiler efficiency: at least 82%; - Service life: at least 25 years.

Waste-heat boiler units (water)

- Pressure in separator: 0.5-0.8 MPa; - Evaporation: 1.5-5.0 tph; - Service life: at least 25 years.

Auxiliary boiler units (thermal)

- Pressure: 1.0-1.3 MPa; - Capacity: 100-14,000 kW; - Thermal fluid temperature: 280ºC; - Service life: at least 25 years.

204 205 206 207

Waste-heat boiler units (thermal) - Pressure: 1.0-1.3 MPa; - Capacity: 100-5,000 kW; - Thermal fluid temperature: 300ºC; - Service life: at least 25 years.

Electrical piston compressors for start air

- Pressure: 30 kg/cm2; - Capacity: ca. 70 m3/h.

Electrical piston compressors for actuating air

- Pressure: 8 kg/cm2; - Capacity: ca. 250 m3/h.

Screw-type electrical compressors for actuating air

- Pressure: 8 kg/cm2; - Capacity: 7-10 m3/h.

208 209

Fuel and oil purifying units Seawater desalting plants

- Capacity: 15-30 tpd

210 211

Single-screw electrical pumps - Pump rate: 0.5-15 m3/h; - Pressure: 5 kg/cm2.

Twin-screw electrical pumps

- Pump rate: 1.5-25 m3/h; - Pressure: 6 kg/cm2.

212

Three-screw electrical pumps

- Pump rate: 4.0-150 m3/h; - Pressure: 10-25 kg/cm2.

213 214 215

Gear-wheel electrical pumps - Pump rate: 0.5-35 m3/h; - Pressure: 4-6 kg/cm2.

Electrical centrifugal pumps

- Pump rate: 5-250 m3/h; - Pressure: 40-90 w.c.m.

Oily water purifying units

- Rate: 1.5-3.5 m3/h

Maneuvering systems

216 217

Ram type steering gears - Torque rating: 500-2,500 kNm

Rotary steering gears

- Torque rating: 500-6,000 kNm

Lateral thrusting propellers

218 219

Horizontal thrusters - Capacity: 500-2,000 kW

Retractable thrusters

- Capacity: 240-500 kW

Electrical equipment

220 221

Marine generators - Capacity: 2,200-4,600 kW

Marine generators

- Capacity: 500-1,200 kW

222 223

Power servomotors Capacity: 3,500-8,000 kW Distributing switchboards

224 Ship-borne transformers (220V, 380V)

225 226

Electric motors Capacity: 8-300 kW Electric cable

Automation systems

227 228 229

Dynamic ship positioning system Power management system Radio navigation systems (GMDSS A1+A2+A3):

- 3 cm and 10 cm band radar stations with electronic plotting aids (ARPA); - Steering / path control systems; - Echo sounders with 0.5-1,000 m depth metering range;

- Logs for speed metering within the range of -10/+60 knots and 0.05 knots accuracy;

- Gyro compasses with 0.5 x sec accuracy of heading indication;

- Magnetic compasses: calibration constant: 1 gr.; remote reading error 1 gr.;

- Navigational IT systems for electronic mapping, i.e., – functioning as an automatic plotting aid;

- Marine navigator receivers (GLONASS, GPS, D-GLONASS, D-GPS);

- Clinometers to meter 40 gr. angles; calibration constant: 1 gr.; - Satellite communication systems; - USB sets; - MF/HF sets; - Maritime safety data receivers (NAVTEX services).

Life-saving gear and fire-fighting installations

230 231

Emergency boats Liferafts

232 233 234

Fire alarm systems and tools Fire-fighting systems and appliances External fire extinguishing systems

- Two fire pumps with min 1,500 m3/h capacity and min 12 kg/cm2 pressure; - Two water-foam fire monitors, with the capacity of 1,200 m3/h each.

Cargo handling gear

235 Electro-hydraulic cranes - Crane rating: 10-15 t; - Boom reach: 15-20 m

Deck outfit

236 Warping capstan - Force exerted rating on winch head: 30-80 kN.

237 238

Winch units for 38-80 mm anchor chain - Force exerted rating on chain grab: 30-80 kN; - Force exerted rating on winch head: 30-80 kN.

Anchor hauling winch:

- Double-drum winch with 350-400 t pull and brake force 500 t, each drum to allow 1,200 m of a 77 mm steel cable wire;

- Two pairs of chain grabs for 76 mm and 84 mm anchor chains.

239 A standby hauling cable winch - Pull: ca. 75 t; - Drum capacity: 4,400 m; - Steel cable wire: diameter ca. 77 mm

240 Tugger winches - Pull: 15-20 t

Safety systems

241 Towing pins - Load: 300 t (SWL)

242 Shark jaws - Holding force: up to 600 t

Tanks and cargo systems for the storage of bulk cargo, drilling mud and liquids

243 244

Bulk material transportation system Drilling mud intra-tank en-route agitation system

245 Cargo intra-tank leveling and thermometry systems

Insulation, painting and equipment of rooms

246 247

Insulation of rooms; wall panels, ports and doors Pipeline insulation

248 Galley equipment - Food kettles; - Cabinet ovens;

- Electric stoves; - Provision store-room equipment.

Control, alarm and protection instruments and equipment

249 Radiation-monitoring instruments.

250 251 252

Gas testing equipment Environmental monitoring instruments Personal protection equipment

CONTACTS

GAZPROM NEFT PJSC

Technological Partnerships and Import

Substitution Department

Galernaya ul. d.5 lit A, St Petersburg 190000,

Russia

Telephone: +7 (812) 363-31-52

Facsimile: +7 (812) 363-31-51

e-mail: dtpi@gazprom-neft.ru