list of prerequisites anlist of prerequisites and creditsd credits
DESCRIPTION
List of Prerequisites and CreditsTRANSCRIPT
-
NC Ver. 2.2
NC 2009 Notes for NC Ver. 2.2 Notes for NC 2009
WEp1 Water Use Reduction N/A Use 20% less water than baseline.
WEc2 WEc2 Innovative Wastewater TechnologiesUse water-conserving fixtures to reduce sewage by 50%
Use water-conserving fixtures to reduce sewage by 50%
WEc3 WEc3 Water Use ReductionUse 20% (1 Point)/30% (2 Points) less water than baseline.
Use 30% (2 Point)/35% (3 Points)/40% (4 points)/45% (innovation credit) less water than baseline. Baseline requires lower water usage for lavatories and kitchen faucets.
EAp1 EAp1Fundamental Commissioning of the Building Energy Systems
EAp2 EAp2 Minimum Energy PerformanceUse 10% less energy than baseline (ASHRAE 90.1-2007 Appendix G)
EAp3 EAp3 Fundamental Refrigerant Management
EAc1 EAc1 Optimize Energy PerformanceRequired minimum, use 14% less energy than baseline (ASHRAE 90.1-2004 Appendix G)
Points start at 12% energy savings compared to baseline (ASHRAE 90.1-2007 Appendix G)
EAc3 EAc3 Enhanced CommissioningEAc4 EAc4 Enhanced Refrigerant Management
EAc5 EAc5 Measurement and Verification
Requirement has been added to provide a process for corrective action if the results of the M&V plan indicate that energy savings are not being achieved.
EQp1 IEQp1 Minimum IAQ Performance Based on ASHRAE 62.1-2004 Based on ASHRAE 62.1-2007EQc1 IEQc1 Outdoor Air Delivery MonitoringEQc2 IEQc2 Increased Ventilation Based on ASHRAE 62.1-2004 Based on ASHRAE 62.1-2007
EQc5 IEQc5Indoor Chemical & Pollutant Source Control
EQc6 IEQc6Controllability of Systems: Thermal Comfort
Based on ASHRAE 62.1-2004 and ASHRAE 55-2004. Based on ASHRAE 62.1-2007 and ASHRAE 55-2004.
EQc7 IEQc7 Thermal Comfort: Design
Sheet1