list of working units and chairsiiwelding.org/media/pdf/iiw_list_of_working_units_ and...x...
TRANSCRIPT
RD type Forms (exchange of information) PAGE
Process Administrative management 1 12 Revision
r0.2 Status
☒ Draft ☐ Approved
RD 130 Date
Paris Nord 2 - BP 51362 - VILLEPINTE - 95942 ROISSY CH DE GAULLE Cedex – FRANCE Phone : + 33 1 4990 3600 Email : [email protected] Website : http://www.iiwelding.org List of Working Units and Chairs 13/12/2017
PREPARATION VERIFICATION APPROBATION TARGET USERS
Cecile MAYER
Time stamp: 13/12/2017 14:31
List of Working Units and
Chairs
Release note: Supersedes document CHAIR-0261. This document is periodically updated. Chairmen of WU are
invited to inform the secretariat of any change in the scope, structure and names of chairs of sub-WUs
RD 130 PAGE
List of Working Units and Chairs
2 12
Revision r0.2
Status Date
☒ Draft ☐ Approved 13/12/2017
1. List of IIW Working Units (Technical and administrative)
Commission Title
I Thermal Cutting and Allied Processes
II Arc Welding and Filler Metals
III Resistance welding, Solid State Welding and Allied Joining Processes
IV Power Beam Processes
V Quality Control and Quality Assurance of Welded Products
VI Terminology
VII Microjoining and Nanojoining
VIII Health, Safety and Environment
IX Behaviour of Metals Subjected to Welding
X Structural Performances of Welded Joints - Fracture Avoidance
XI Pressure Vessels, Boilers and Pipelines
XII Arc Welding Processes and Production Systems
XIII Fatigue Behaviour of Welded Components and Structures
XIV Education and Training
XV Design, Analysis and Fabrication of Welded Structures
XVI Polymer Joining and Adhesive Technology
XVII Brazing, Soldering and Diffusion Bonding
XVIII Quality Management in Welding and Allied Processes
Study Group Title
SG-212 The Physics of Welding
SG-RES Welding Research Strategy and Collaboration
Select Committee Title
SC-AIR* Permanent Joints in New Materials and Coatings for Aircraft Engineering
SC-AUTO* Automotive and Road Transport
SC-ENV* Environment
SC-MICRO* Microjoining and Nanojoining
SC-QUAL* Quality Management in Welding and Allied Processes
SC-SHIP* Shipbuilding
SC-UW* Underwater Welding
* Disbanded.
RD 130 PAGE
List of Working Units and Chairs
3 12
Revision r0.2
Status Date
☒ Draft ☐ Approved 13/12/2017
List of IIW Board of Directors’ Units
Units Title
BOARD Board of Directors
CHAIR WU Chairs of Working Units
IAB International Authorization Board
IAB/A Education, Training and Qualification
IAB/B Implementation and Authorization
IAB/BOA IAB Board of Directors
IAB/SEC IAB/EWF Secretariat
TMB Technical Management Board
WG-COM & MARK Working Group Communications and Marketing
WG-RA Working Group Regional Activities
WG-STAND Standardization
List of first part for Documents published in events
Units Title
CONF International Conferences
COLL Colloquia
PSES Public Sessions
ICRA Regional Activities
IIWC Research
BOOK Books, booklets, pamphlets
INVT Invited papers
SEMR Seminars
MODL Conference on modelling
RD 130 PAGE
List of Working Units and Chairs
4 12
Revision r0.2
Status Date
☒ Draft ☐ Approved 13/12/2017
2. List of Working Units with Chairs
In white: Chair / in green: Vice-Chair
C-I
Additive Manufacturing,
Surfacing and Thermal
Cutting
Doug Kautz
-
C-I-C
Surfacing
Veli Kujanpäa
C-I-E
Thermal cutting and
Related processes
Veli Kujanpäa
C-I-F Additive
Manufacturing
Veli Kujanpäa
C-II
Arc Welding and Filler
Metals
Gerhard Posch - Arun
Kumar BHADURI
C-II-A
Metallurgy of weld metal
Thomas Kannengiesser
C-II-C
Testing and measurement
of welds
Zhuyao Zhang
C-II-E
Standardization and
classification of weld filler
metals
David Fink
C-III
Resistance welding, solid
state welding and allied
joining processes
Jorge dos Santos - Hee
Seok Chang
C-III-A
Resistance welding and
allied processes
Menachem Kimchi
C-III-B
Friction based processes
Pedro Vilaça
C-III-B-WGB1 Friction stir
welding standardization
Axel Meyer
C-III-B-WGB4
Friction stir spot welding
standardization
Jorge Dos Santos
Marc PetersenC-III-WGS
Standardization
Kin-Ichi Matsuyama
RD 130 PAGE
List of Working Units and Chairs
5 12
Revision r0.2
Status Date
☒ Draft ☐ Approved 13/12/2017
C-IV
Power Beam Processes
Herbert Staufer
C-IV-A Laser Beam
Processes
Seiji Katayama
C-IV-B Electron Beam
Processes
Ernest Levert
C-IV-C Laser Arc Hybrid
Welding
Claus Thomy
C-V
Non-destructive testing
and quality assurance of
welded products
Eric Sjerve
C-V-A
Radiographic based weld
inspection techniques
Uwe Zscherpel
C-V-C
Ultrasonic based weld
inspection techniques
Daniel Chauveau
C-V-C-a
Development of a
methodology to use FMC and
TFM for field inspections
Daniel Chauveau
C-V-C-b
Review of the proposal for IIW to
own the V3 ultrasonic calibration
block designC-V-D
Structural health
monitoring
Bastien Chapuis
C-V-E
Weld inspection based on
Eelectric, magnetic and
optical techniques
Marc Kreutzbruck
C-V-E-a
MMM-technique
Anatoly Dubov
C-V-E-b
Revision of ISO 24497 taking
into account outstanding ISO
and IIW comments lead
Uwe ZscherpelC-V-F
NDT Reliability Including
Simulation of NDT
Techniques
Pierre Calmon
RD 130 PAGE
List of Working Units and Chairs
6 12
Revision r0.2
Status Date
☒ Draft ☐ Approved 13/12/2017
C-VI
Terminology
Glenn Ziegenfuss
Jerome Dietsch
C-VI-A
IIW-Thesaurus
Jerome Dietsch
C-VII
Microjoining and Nanojoining
Akio HIROSE
Guisheng ZOU
C-VIII
Health, safety and environment
Wolfgang Zschiesche
John Petkovsek
C-IX
Behaviour of metals subjected to
welding
Hee JinK IM
C-IX-C
Creep and heat resistant welds
Peter Mayr - Susanne Baumgartner
C-IX-H
Weldability of stainless steels and nickel-base
alloys
Elin Westin - Maria-Asunción Valiente
Bermejo
C-IX-L
Low alloy steels welds
Norbert Enzinger - Toshihiko Koseki
C-IX-NF
Non ferrous materials
Jorge dos Santos - Carl E. Cross
C-IX-WG1
Mathematical Modelling of Weld Phenomena
Christoph Sommitsch
C-X
Structural performances of welded
joints - Fracture avoidance
Fumiyoshi Minami
C-X-A
Welding residual stresses in thick steel
structures
Jeong-Ung Park
RD 130 PAGE
List of Working Units and Chairs
7 12
Revision r0.2
Status Date
☒ Draft ☐ Approved 13/12/2017
C-XI
Pressure vessels, boilers
and pipelines
Teresa Melfi
C-XI-A
Correlation of Toughness data
Sonja Felber
C-XI-E
Transmission pipelines
Christoph Gerritsen
C-XI-H
Performance of welds for hydrogen service
C-XII
Arc welding processes and
production systems
Satoru ASAI
John Norrish
C-XII-A
Sensors and control
Zengxi Stephen Pan
C-XII-B
Arc welding processes
Stephan Egerland
C-XII-C
Production systems and applications
Satoru Asai
C-XII-D
Underwater engineering
Ian Richardson
C-XII-E
Quality and safety in welding
Chuansong Wu
RD 130 PAGE
List of Working Units and Chairs
8 12
Revision r0.2
Status Date
☒ Draft ☐ Approved 13/12/2017
C-XIII
Fatigue of welded components and
structures
Kenneth MacDonald
Zuheir Barsoum
C-XIII-WG1
Fatigue testing and evaluation of
data for design
Guy Parmentier
C-XIII-WG2
Techniques for improving the
fatigue strength of welded
components and structures
Zuheir Barsoum
C-XIII-WG3
Stress analysis
Wolfgang Fricke
C-XIII-WG4
Effects of Weld Imperfections on
Fatigue Strength
Remes Heikki
C-XIII-WG5
Life extension of welded structures
by repair, retrofitting and structural
monitoring
Majid Farajan
C-XIII-WG6
Residual Stress Effects in fatigue
Thomas Nitschke-Pagel JWG-XIII-XV
Fatigue design rules
Adolf Hobbacher
C-XIV
Education and training
Carl J. Peters
RD 130 PAGE
List of Working Units and Chairs
9 12
Revision r0.2
Status Date
☒ Draft ☐ Approved 13/12/2017
C-XV
Design, analysis and
fabrication of welded
structures
Stefano Botta
C-XV-A
Analysis
Kyong-Ho Chang
C-XV-B
Design
C-XV-C
Fabrication
Masahito Mochizuki
Stefano Botta
C-XV-D
Planar structures
Koji Azuma
C-XV-E
Tubular structures
Thomas Ummenhofer
C-XV-F
Economy
Karoly Jarmai
C-XVI
Polymer joining and
adhesive technology
David Grewell
Phil Bates
C-XVII
Brazing, soldering, and
diffusion bonding
Warren Miglietti
Hua-Ping Xiong
C-XVII-A
Brazing
Lukas Wojarski- Tim Radel
C-XVII-B
Diffusion Bonding
Simon Jahn - Sebastian
Weis
C-XVII-C
Soldering
Erika Hodulova
Hong Li
RD 130 PAGE
List of Working Units and Chairs
10 12
Revision r0.2
Status Date
☒ Draft ☐ Approved 13/12/2017
Technical Management Board
Stephan Egerland
SG-212
The physics of welding
Manabu Tanaka
SG-RES
Welding research strategy and
collaboration
Americo Scotti
WiW EdBoard
Editorial Board for Welding in the World
John Lippold
C-XVIII
Quality Management in welding and allied
processes
Robert Shaw
Mathias Lundin
RD 130 PAGE
List of Working Units and Chairs
11 12
Revision r0.2
Status Date
☒ Draft ☐ Approved 13/12/2017
3. LIST OF ACTIVE GROUPS UNDER THE RESPONSIBILITY OF THE BOARD OF
DIRECTORS
Board of Directors
Doug Luciani
WG-Com&Mark
Working Group
Communications and
Marketing
WG-RA
Working Group Regional
Activities
Dan Tadic
WG-STAND
Standardization
Mathias Lundin
Kin-Ichi Matsuyama
IAB
International Authorization
Board
Jim Guild
White Paper – C. Smallbone – Dormant
TG-HIST History book of IIW - C. Smallbone
WG-GOV Governance - G. Marquis
TG-YL Young Leaders - C.P. Ang
WG-FAR Finances, Audit & Risks Committee - L Costa
RD 130 PAGE
List of Working Units and Chairs
12 12
Revision r0.2
Status Date
☒ Draft ☐ Approved 13/12/2017
International Authorization
Board (Members Meeting)
Jim Guild
IAB Group A
Education, training and
qualification
Henk Bodt
IAB Group B
Implementation and
Authorisation
Stefano Morra
IAB Assessors
Lead and Peer Assessors
Tim Jessop
IAB Board
Jim Guild