listen to the quiet
TRANSCRIPT
HUSHTONE®
PET POLYESTER ACOUSTICAL PRODUCTSLamvin Is Reinventing Acoustical Design. Our revolutionary
Hushtone acoustical products line is a designer’s dream. No stone
was left unturned while curating this beautiful assortment of products.
Our Hushtone line is made with the highest quality design friendly felt,
for the ultimate in aesthetics and acoustical benefit.
CEILINGS
LIGHTING
DIVIDERS
WALLS
COLORS & PATTERNS
ACOUSTICAL DATA
1
HUSHTONE PANEL®
SPECIFICATIONS Panel Sizes: 48” w x 96” h*
Thickness: 9mm, 12mmWeight Per Square Foot:
9mm /.27 lb. - 12mm /.44 lb.
FIRE RATINGClass A per ASTM E-84, based on 9mm white
COMPOSITION
n 100% Polyethylene Terephthalate (PET) n 55% recycled content
ENVIRONMENTAL FACTORS
n 100% recyclable n Low VOC Emissions
n ASTM - D5116 n LEED - MRc4
2
* Board Size 48” x 95-1/4“ #30 Blue, #41 Marigold, #35 Speckled Earth & #34 Pure Gray** 9mm is tested as Type “A” Mounting, 9mm w/ 2” gap is tested as Type “F-50” Mounting, 9mm w/ 4” gap is tested as Type “F-100” Mounting, 18mm is tested as Type “A” Mounting
https://lamvin.com/hushtone/
HUSH BEAM®
SPECIFICATIONS Product Weight: 1.5 lbs/SF
Length: 4’, 8’Width: 2.75’’Height: 12’’, 16’’, 24”
FIRE RATINGClass A per ASTM E-84
COMPOSITION n 100% Polyethylene Terephthalate (PET) n 55% recycled content
ENVIRONMENTAL FACTORS n 100% recyclable n Low VOC Emissions n ASTM - D5116
3
INSTALLATION OPTIONS Product can be installed with your choice of either aircraft cable or threaded rod attachments.
4
INSTALLATION OPTIONS Product can be installed with your choice of either aircraft cable or threaded rod attachments.
5
SPECIFICATIONS Standard Cloud Sizes: 47” Diameter Circle or 47” x 47” Square
Product Weight: 15 lbs/CloudThickness: 2.75’’
FIRE RATINGClass A per ASTM E-84
COMPOSITION n 100% Polyethylene Terephthalate (PET)
n 55% recycled content
ENVIRONMENTAL FACTORS
n 100% recyclable n Low VOC Emissions
n ASTM - D5116 n LEED - MRc4
ZEPPELIN™
6
HUSH BRIGHT BEAM™
SPECIFICATIONS Product Weight: 1.5 lbs/SF *weight without lightLength: 4’, 8’Width: 2.75’’Height: 12’’, 16’’, 24”
FIRE RATINGClass A per ASTM E-84
LIGHTINGSPECIFICATIONS Light Wattage: 56W
Color Temperature: 3000KLED Dimmability: 0-10V Lumen: 8800Voltage: 120-277V
COMPOSITION n 100% Polyethylene Terephthalate (PET) n 55% recycled content
ENVIRONMENTAL FACTORS n 100% recyclable n Low VOC Emissions n ASTM - D5116
7
LIGHTING HARDWARE Cable kit with:
(2) 6’ aircraft cable, (1) 5 wires clear power feed, (2) white/black/silver canopy
INSTALLATION OPTIONS Product can be installed with your choice of either
aircraft cable or threaded rod attachments.
8
LIGHTING HARDWARE Cable kit with:(2) 6’ aircraft cable, (1) 5 wires clear power feed, (2) white/black/silver canopy
INSTALLATION OPTIONS Product can be installed with your choice of either aircraft cable or threaded rod attachments.
9
ZEPPELIN™
BRIGHTSPECIFICATIONS
Standard Cloud Sizes: 47” Diameter Circle or 47” x 47” SquareProduct Weight: 15 lbs/Cloud *Add 5 lbs. for light
Thickness: 2.75’’
FIRE RATINGClass A per ASTM E-84
LIGHTINGSPECIFICATIONS
Light Wattage: 56W
Color Temperature: 3000KLED Dimmability: 0-10V
Lumen: 8800Voltage: 120-277V
COMPOSITION n 100% Polyethylene Terephthalate (PET)
n 55% recycled content
ENVIRONMENTAL FACTORS
n 100% recyclable n Low VOC Emissions
n ASTM - D5116 n LEED - MRc4
10
HUSH DIVIDER®
SPECIFICATIONS Standard Screen Sizes: 38” w x 47” h, 47” w x 56-1/2” h, 47” w x 75”h, 47” w x 94” h(with Stationary Feet) Standard Screen Sizes: 40.75” w x 47” h, 47” w x 59.5” h , 47” w x 77.75” h (with Castors) Thickness: 2.75”Weight: 47”x 75” - 36 lbs/with frame
FIRE RATINGClass A per ASTM E-84
COMPOSITION n 100% Polyethylene Terephthalate (PET) n 55% recycled content
ENVIRONMENTAL FACTORS n 100% recyclable n Low VOC Emissions n ASTM - D5116 n LEED - MRc4
11
HUSH ART SCREENS®
SPECIFICATIONS Standard Panel Size: 47” w x 95” h
Thickness: 9mmWeight: 10 lbs/Panel
HARDWARE INCLUDED Product comes with strips top and bottom
and embedded hardware.
FIRE RATINGClass A per ASTM E-84
COMPOSITION n 100% Polyethylene Terephthalate (PET)
n 55% recycled content
ENVIRONMENTAL FACTORS
n 100% recyclable n Low VOC Emissions
n ASTM - D5116 n LEED - MRc4
12
HUSH HEX®
SPECIFICATIONS Standard Panel SIze: 15” w x 13” h Thickness: .625”Weight: 1 lb./Tile
FIRE RATINGClass A per ASTM E-84
COMPOSITION n 100% Polyethylene Terephthalate (PET) n 55% recycled content
ENVIRONMENTAL FACTORS n 100% recyclable n Low VOC Emissions n ASTM - D5116 n LEED - MRc4
13
SUBWAY™
SPECIFICATIONS Panel Sizes: 23.5” w x 23.5” h or 47” w x 23.5” h
Thickness: 9mmEdge Detail: Chamfered
Weight: .25 lbs/SF
FIRE RATINGClass A per ASTM E-84
COMPOSITION n 100% Polyethylene Terephthalate (PET)
n 55% recycled content
ENVIRONMENTAL FACTORS
n 100% recyclable n Low VOC Emissions
n ASTM - D5116 n LEED - MRc4
16
17
12mm FINISHES
02Taupe
10True Black
08Eggplant
19Denim
52Latte
03 Light Gray
11Steel
09Deep Blue
21Indigo Blue
41Marigold
05Dark Green
12Moss
53Smoke Beige
54Espresso
55Tangerine
17Dark Gray
22Yellow
34Pure Gray
56 Azure
07 White
18Arctic Ice
30Blue
35Speckled Earth
50Caramel
36Berry Red
43Lava
42Cream
48 Avocado
45Big Red
39 Green Apple
44Ivory
49Brunette
51Sunkist Orange
47Emerald
HUSHTONE® COLORS
02Taupe
03Light Gray
17 Dark Gray
34Pure Gray
9mm FINISHES
18
HUSH ART SCREEN™ & HUSH DIVIDERPATTERNS
09Squares Less
12Bubble Bath
14Bubble 1.0
15Bubble 2.0
16Polka Dots
01Flowers
17 Raining Dots
02Diamonds
18Butterfly 1.0
03Triangles
19 Butterfly 2.0
06Snowflake
10 Swiss Much
07 Squares 1.0
11 Swiss Less
08 Squares 2.0
31Horizons
32Matrix 1.0
27 Cobblestone
2.0
26 Cobblestone
1.0
20 Bloom
21 Falling Leaf
23 Fire Lily
29Matchsticks
30 Falling
Diamonds
28Splash
12 Gradient Dots
HUSHTONE® PANEL
* Board Size 48” x 95-1/4“ #30 Blue, #41 Marigold, #35 Speckled Earth & #34 Pure Gray** 9mm is tested as Type “A” Mounting, 9mm w/ 2” gap is tested as Type “F-50” Mounting, 9mm w/ 4” gap is tested as Type “F-100” Mounting, 18mm is tested as Type “A” Mounting
HUSH BEAM™
Based on Baffle size 4’ x 2’ with Type “J” Mounting. Sabins are based on Sa-bins per Object, NRC is an equivalent number based on one face of one panel
Frequency (Hz) 125 250 500 1000 2000 4000 NRC
2.75” Thickness .53 .74 1.06 1.54 1.77 1.94 1.30
Frequency (Hz) 125 250 500 1000 2000 4000 SABINS
2.75” Thickness 2.94 4.45 7.05 10.62 12.61 13.64
HUSH BRIGHT BEAM™
Based on Baffle size 4’ x 2’ with Type “J” Mounting. Sabins are based on Sabins per Object, NRC is an equivalent number based on one face of one panel
Frequency (Hz) 125 250 500 1000 2000 4000 NRC
2.75” Thickness .53 .74 1.06 1.54 1.77 1.94 1.30
Frequency (Hz) 125 250 500 1000 2000 4000 SABINS
2.75” Thickness 2.94 4.45 7.05 10.62 12.61 13.64
Frequency (Hz) 125 250 500 1000 2000 4000 NRC9mm Thickness .04 .04 .16 .40 .63 .82 .309mm w/ 2” Air Gap .07 .13 .42 .79 .89 .76 .559mm w/ 4” Air Gap .14 .32 .73 .92 .72 .88 .6518mm Thickness .05 .12 .39 .74 .95 1.04 .55
ZEPPELIN™
Frequency (Hz) 125 250 500 1000 2000 4000 NRC
2.75” Thickness .53 .74 1.06 1.54 1.77 1.94 1.30Based on Cloud size 4’ x 4’ with Type “J” Mounting. NRC is an equivalent number based on one face of one panel.
ZEPPELIN™ BRIGHTFrequency (Hz) 125 250 500 1000 2000 4000 NRC
2.75” Thickness .53 .74 1.06 1.54 1.77 1.94 1.30Based on Cloud size 4’ x 4’ with Type “J” Mounting. NRC is an equivalent number based on one face of one panel.
HUSH DIVIDER®
Frequency (Hz) 125 250 500 1000 2000 4000 NRC
2.75” Thickness .29 .40 .54 .73 .87 .90 .65Tested as Type “K” Mounting. Based on solid panels with no patterns.
HUSH ART SCREENS®
Frequency (Hz) 125 250 500 1000 2000 4000 NRC
9mm Thickness .29 .35 .54 .85 1.22 1.44 .75Tested as a Type “J” Mounting. Based on panel size 4’x1’. NRC is an equivalent number based on one face of one panel. Based on solid panels with no patterns.
HUSH HEX®
Frequency (Hz) 125 250 500 1000 2000 4000 NRC
.75” Thickness .03 .07 .29 .60 .76 .86 .45Tested as Type “A” Mounting
SUBWAY™
Frequency (Hz) 125 250 500 1000 2000 4000 NRC
9mm Thickness .04 .04 .16 .40 .63 .82 .30Tested as Type “A” Mounting
ACOUSTICAL DATA
SONIC DESIGN FORM®
3-DIMENSIONAL WALL AND CEILING PANELS THAT OFFERENDLESS DESIGN OPTIONS WITH VITAL ACOUSTIC RESULTS.
With five unique moulded shapes to choose from,
the possibilities for customization are infinite.
From Diamonds, to Planks, we offer sleek and
refined options to meet all of your needs.
Sonic Design Form can also be made
with our formaldehyde free Eco-Sonic core.
ARCH PLANK
WEDGE KEYSTONE
20
DIAMONDOUR MOST VERSATILE SONIC DESIGN FORM®.
These panels offer an array of design possibilities. Whether
you’re looking for a unique acoustical solution for the ceilings
or walls - The Diamond combines the flexibility of a multitude
of configurations and acoustical fabric options.
22
ARCHA VISUAL STUNNER. Arch panels work well in any
environment. Pair them with a natural fiber acoustical
fabric for a more rustic vibe or create a pattern with
pops of color for a modern feel. These panels will be
the focal point of any room.
21/2”
16”
16”
6”
Available in three standard sizes: Small, Medium and Large. Custom sizes can be special ordered.
23
PLANK
413/16”
8”
11/2”
413/16”
14”
11/2”
20”
413/16”
11/2”
413/16”20
”
1”
Available in Multiple Sizes, 1”-2” thickness. Planks can be
configured to create unique horizontal or vertical patterns.
FUN AND FLEXIBLE. If you’re looking for a unique
way to introduce texture to room, the Sonic Design
Form® Plank provides a unique way to introduce
texture to a room. You can combine these boards in
different configurations and lay them out vertically or
horizontally. These can be covered in acoustical fabric
or wood veneer offering you endless design options.
26
WEDGESLEEK AND REFINED. Sonic Design Form® Wedge is an
ideal option for a clean and polished look. These boards
are available in different sizes and configurations.
Lay them out vertically or horizontally for added
design variations.
27
24”
12”
Available in three standard sizes: Small, Medium and Large. Custom sizes can be special ordered.
4”
8”
24”
16”
28
25/8”
15”
Available in three standard sizes: Small, Medium and Large. Custom sizes can be special ordered.
29
KEYSTONEDEFINED AS THE MOST IMPORTANT PART OF ANYTHING.
You will certainly feel that way when you see how the Sonic
Design Form® Keystone enhances a room. This panel brings so
many design options to the table. The unique shape works well
with almost any acoustical fabric or wood veneer covering.
15”
12”
30
32
SONIC PRINTED ART PANELS
SONIC PANELS
INTERACTIVE SERIES
STEPS FOR DESIGNING/INSTALLATION OPTIONS
https://lamvin.com/products/
SONIC PRINTED ART PANELS OPEN UP INFINITE POSSIBILITIES for your creativity and
imagination by providing acoustical performance
and limitless design. The image can be printed
as a singular panel or arrayed into multiple
panels to cover larger surface areas. This panel
is suitable for framing, further extending décor
possibilities. Perfect for artwork, logos, or any
image requiring a high-resolution finish and
acoustic absorption.
THICKNESS 1-1/8” • 1-5/8” • 2-1/8”
NRC 1” - 0.90 • 2” - 1.00
FIRE TEST ASTM E84-Class I/A
SONIC PRINTED ART
PANEL
34
SONIC STANDARDThis versatile wall and ceiling panel is the ideal solution for spaces with reverberant noise problems. It’s easy-to-install on walls or ceilings with your choice of mountings. It is available in a variety of standard sizes and finishes, or completely customizable for specific design applications.
THICKNESS 1/2” • 3/4” • 1” • 1-1/2” • 2” • 3” • 4”NRC 1” - 0.90 • 2” - 1.00FIRE TEST ASTM E84-Class I/A
SONIC TACKABLE HIGH-IMPACTOur Sonic Panel Tackable High-Impact is designed specifically for easy tackability and for use in high-traffic areas. This tough panel will meet all your acoustical challenges. Featuring a high-density fibreglass face, this panel is equally suited for walls or ceilings and can be customized in a variety of ways.
THICKNESS 5/8” • 7/8” • 1-1/8” • 1-5/8” • 2-1/8” NRC 1” - 0.90 • 2” 1.15 FIRE TEST ASTM E84-Class I/A
FinishAcoustical Core
Hardened Edge
Acoustical Core
Finish Hardened Edge
High-density fiberglass
SONIC PANELS
SONIC PANEL® ULTRA HIGH-IMPACTWith a strong co-polymer face, the Sonic Panel Ultra High-Impact is the most durable of our fabric-covered panels. It is ideal for noise absorption and works well in high-abuse areas.
THICKNESS 1-1/16” • 1-9/16” • 2-1/16”NRC 1” -0.90 • 2” - 1.00FIRE TEST ASTM E84-Class I/A
Acoustical Core
Finish Hardened Edge
High-impact perforatedco-polymer
35
ECO-SONIC® PANELWith an environmentally friendly core, the Eco-Sonic Acoustical Panels
are formaldehyde free. Eco-Sonic Panels have a Red List Free core and are certified California CHPS Section 01350 meeting clean air emission
standards. Available as a core for baffles, clouds, wall and ceiling panels.
THICKNESS 1” • 2”NRC 1” - 0.90 • 2” - 1.15
FIRE TEST ASTM E84-Class I/A
FinishAcoustical Core
Hardened Edge
ECO-SONIC® TACKABLE HIGH-IMPACT PANEL
With an environmentally friendly core, the Eco-Sonic Acoustical Panels are formaldehyde free. Eco-Sonic Panels have a Red List Free core and are certified California CHPS Section 01350 meeting clean air emission
standards. Available as a core for baffles, clouds, wall and ceiling panels.
THICKNESS 1-1/8” • 2-1/8”NRC 1” - 1.00 • 2” - 1.15
FIRE TEST ASTM E84-Class I/A
Finish
Acoustical Core
Hardened Edge
High Density Fiberglass
High-impactperforated
co-polymer Acoustical Core
SONIC PANEL® ULTRA PLUS HIGH-IMPACT
With an extremely tough perforated co-polymer surface on its face and wrapped around all edges to the back, the Ultra Plus High- Impact
Acoustical Panel offers superior acoustical absorption and strength and is available in an array of color choices.
THICKNESS 1-1/8” • 1-5/8” • 2-1/8”NRC 1” - 0.85 • 2”-1.05
FIRE TEST ASTM E84-Class I/A
36
SONIC PANEL® BASIC PLUSThe Sonic Panel Basic Plus is available as a standard white acoustical panel or as a painted panel that’s designed to blend into room decor. It features an acoustically transparent textured or smooth paint finish that offers the traditional look of drywall or plaster and delivers exceptional sound absorption.
THICKNESS 1-1/8” • 1-5/8” • 2-1/8”NRC 1” - 0.85 • 2” - 1.00FIRE TEST ASTM E84-Class I/A
SONIC SUSPENDED CEILING CLOUDSSonic Ceiling Clouds are designed to suspend horizontally from the ceiling to effectively reduce reflected sound. Perfect for large open areas, these hanging cloud panels are available in any shape or size and offer a unique look, depth, or design to a ceiling—or they can simply blend in.
THICKNESS 1” • 1-1/2” • 2”NRC 1” - 0.90 • 2” - 1.00FIRE TEST ASTM E84-Class I/A
Hardened Edge
Painted finish Acoustical Core
High-density fiberglass
Acoustical Core
Finish Hardened Edge
SONIC DUAL CORE HANGING BAFFLEBaffles are designed to hang vertically and to reduce reverb and echoes in large open areas. Sonic Dual Core Hanging Baffles improve speech intelligibility, creating an intimate acoustical ambience in mid-sized rooms and clearer voice transmission in larger rooms. Hanging acoustical baffles are made to complement the décor of any room both visually and acoustically.
THICKNESS 1” • 1-1/2” • 2”SAVINGS 12.0 based on 24” x 48” baffleFIRE TEST ASTM E84-Class I/A
Hardened Edge
Non-corrosive FinishAcoustical Core
37
SONIC PANELS
SONIC PANEL®
RADIUSSpecifically designed for curved surfaces, convex and concave Radius Acoustical Panels offer performance and aesthetics along difficult-to-cover curved walls or
columns. These panels feature a perforated co-polymer facing to provide maximum durability in high-traffic areas.
THICKNESS 1-1/16” • 1-9/16” • 2-1/16”NRC 1” - 0.90 • 2” – 1.00
FIRE TEST ASTM E84-Class I/A
Hardened edge
Finish
Scored Acoustical Core
SONIC SINGLE CORE HANGING BAFFLE
With your choice of finish carefully and skilfully wrapped around this solid baffle to hide all seams, this baffle
offers a seamless design to reduce reverb and echoes in large open areas. The Sonic Single Core Hanging
Baffles improve speech intelligibility creating an intimate acoustical ambience in mid-sized rooms and clearer voice transmission in larger rooms. Vertically hanging acoustical
baffles are made to complement the décor of any room both visually and acoustically.
THICKNESS 1” • 1-1/2” • 2”SAVINGS 12.0 based on 24” x 48” baffle
FIRE TEST ASTM E84-Class I/A
Non-corrosive
Hardened Edge
Finish
Acoustical Core Wood trim
38
SONIC PANEL® REFLECTIVESonic Reflective Panels counter balance our Sonic Acoustical Panels. With a reflective face beneath the finished surface, these panels improve the acoustical signature of any room needing a fine-tuned balance of sound and silence.
THICKNESS 1/2”•3/4”•1”•1-1/2”• 2”•3”•4”NRC 1”- 0.25FIRE TEST ASTM E84-Class I/A
Hardened Edge
Finish
Reflective Material
Acoustical Core
SONIC PANELS
SONIC PANEL®
POLYESTER COREPolyester has many environmental benefits, which include no formaldehyde and mildew resistance. These Polyester Core Panels can be designed in any shape or size and may be used as an alternate core for most of our acoustical products.
THICKNESS 1/2” • 1”NRC 1/2” - 0.50 • 1” - 0.75FIRE TEST ASTM E84-Class I/A Acoustical Core
Finish Hardened Edge
SOFT TONE PANEL® Soft-Tone Acoustical Panels are an exceptional choice when a versatile sound barrier is required to reduce traveling noise. Specifically designed for classrooms, conference rooms, offices, or anywhere a high-quality sound barrier is needed.
THICKNESS Soft-Tone 50 = 1/2” • Soft-Tone 60 = 3/4”NRC Soft-Tone 50 = 0.40 • Soft-Tone 60 = 0.5STC Soft-Tone 50 = 25 • Soft-Tone 60 = 28FIRE TEST ASTM E84-Class I/A
Finish
Perforatedmineral fiberboard core
39
40
STANDARD EDGESChemically hardened edges reinforce the panel perimeter against warping and damage.
EDGE DETAIL OPTIONS
Mitered Bevel Radius Pencil Square Tegular
TESTINGNRC ratings are a result of testing performed at an accredited acoustical laboratory within a controlled environment using specific fabric, sizes and mounting. Therefore, ratings may vary slightly depending on customers’ fabric choice and mounting configuration.
STANDARD FABRICStylish finishes including fabrics and vinyls are available. See the “Finishes” page on Lamvin.com for a direct link to our recommended suppliers’ catalogs. Catalogs include detailed images of an array of designs. Custom fabrics and printed fabrics are also options. All finishes will be reviewed for panel stability.
LEED OBJECTIVESLamvin, Inc. strives to be a leader in not only our own environmental efforts and
contributions, but also to help our clients achieve the same objectives. We help our
customers attain the LEED points and credits required for sustainable green buildings
pioneered by the US Green Building Council (USGBC). Not only do our products help our
customers achieve LEED objectives, but our manufacturing processes and materials go
beyond the minimal requirements established by the USGBC.
These are just a few of the steps we have taken to further our commitment to producing sustainable products.
• Adhesives used in our manufacturing processes have zero VOCs, emitting no harmful chemicals into the air
• Our 57,000-square foot manufacturing plant has been completely retrofitted with energy-saving lighting with motion sensors
• Our computer-driven product manufacturing process optimizes all jobs for minimal waste, diverting that waste from our landfills
• Our large format CAD-driven water-jet machine used for custom and large production jobs allows for perfect accuracy, the highest material yield and virtually no production errors, once again diverting unnecessary waste from our landfills.
Please contact us to discuss your LEED project and how we can help you achieve your credits and points.
This series of products is the ultimate combination of sound reflection and absorption. Diffusers feature a convex or pyramid shape with reflective surfaces to diffuse sound within a zone. Absorbers are designed to adjust the sound level of a room. Absorbers and diffusers are interchangeable.
ABSORBER PANELOur Absorber Panels are designed to accompany Diffusers to perfect the sound levels in a room. They are suited for walls or ceilings and can be customized in a variety of ways.
THICKNESS up to 2-1/8”NRC 2” - 1.00FIRE TEST ASTM E84-Class I/A
BARREL & PYRAMID DIFFUSERSDiffusers are ideal for venues such as theaters, auditoriums and band rehearsal halls which demand exquisite sound quality and enhanced acoustical performance. Barrels and pyramids disperse and blend sounds within a room, greatly reducing sound waves and echoes. Each shape uniquely radiates sound from its surface, providing a balanced distribution of reflective sound for a broad range of frequencies.
NRC 0.10 to 0.20FIRE TEST ASTM E84-Class I/A
INTERACTIVE SERIES
41
42
TACKBOARDSTackboards are a versatile sound transmission inhibitor with
tackability. They feature an industrial insulation board core for stability, strength and excellent tractability. When laminated
with vinyl, Tackboards provide a low-maintenance, mold- and mildew- resistant surface, which is easy-to-clean. Tackboards
may also be fabric covered for enhanced noise inhibition, while providing a resilient surface that heals quickly from pinholes
due to repeated bulletin board use and posting of displays or messages. Choose from a variety of sizes, colors and trims to
fit your classroom, office, lobby or conference room.
FIRE TEST ASTM E84-Class I/A,ASTM E84-Class C
SOUND SUCKER® PANEL METAL WALL
This panel is specifically designed for the harshest environments. The SOUND SUCKER® Metal Acoustical Panel
provides industrial sound solutions for machine and equipment rooms, where noise control is more then aesthetic comfort, but
essential to safety. This panel uses a strong galvanized facing that is available flat or corrugated. A variety of standard and
custom perforation options are available.
THICKNESS 2” • Custom thickness availableNRC 1.0
FIRE TEST ASTM E84-Class I/A
Finish
Tackboard core
43
STEPS FOR DESIGNING
SUPERIOR CRAFTSMANSHIP
Plain, fiberglass mat, or 1 /8” high-density, tackable, fiberglass face for superior surface finish and durability
6-7 PCF. SCS certified post-consumer recycled content fiberglass core
Wide array of fabrics, commercial wallcoverings, digital images, and wood wallcovering surface materials
Hand tailored and hardened corner detail
Proprietary adhesion process uniformly bonds the surface finish of your choice to the fiberglass core
Panel sizes available in widths up to 48” and lengths up to 120” in ½” to 2”
CLOUDS BAFFLES WALL MOUNTEDCEILING MOUNTED
START WITH THELOCATION
DETERMINE THEPANEL TYPE
CHOOSE ASURFACE MATERIAL
SELECT THEFINISH DETAILS
INSTALL YOURACOUSTICALTREATMENTS
2 3 4 51
Water based hardened edges available in a variety of style options
INSTALLATION
44
L BRACKET
ROTOFAST EYE HOOK
CEILINGSTypical Rotofast placement for 48” x 96” Panels
Wall PanelSide View
RotofastSnap-OnAnchor
Wall
Note: Drywall anchors MUST be used during install.
ROTOFAST SNAP-ON
ADHESIVE/IMPALING CLIP MOUNT
Back of Panel
Substrate
Adhesive
AcousticPanel
WALLS
Substrate Front of Panel
ImpalingClips
DrywallScrews
Substrate
Z-CLIP MOUNTING SYSTEM
Acoustic Panel Wall
STEP 1: Mechanically fasten Z-Clips and Velcro to substrate via screws and anchors.
STEP 2: Mechanically fasten Z-Clips and Velcro to back panel (if not pre-installed).
STEP 3: Press top of panel above substrate mounted Z-Clip slide panel down to engage Z-Clip press panel flush with substrate to engage velcro pads.
1.
2. 3.
* If adhesive is used in lieu of mechanical clips to mount panels, a walnut size portion of glue in clip and velcro locations recommended.