listing constructional data report (cdr)...photo 8 - pcb layout view for single rectified board...

Listing Constructional Data Report (CDR)

Report Number SZ09040028-1 Original Issued: 6-May-2009 Revised: 30-Apr-2010

Standard(s)

Applicant Manufacturer

Address Address

Country CountryContact ContactPhone PhoneFAX FAXEmail Email

Park Chau Bin, Eastern Town,Dongguan, Guangdong Province

(360) 896 2000 86-769- 2208 2859

1499 SE Tech Center Place, Suite350 Vancouver, WA 98683-9575

USA P.R. ChinaMr. Grant Bowen Mr. Ben Ng

1.0 Reference and Address

Logitech, Inc.

86-769- 2208 [email protected]

Dongguan TaiSing Manufacturing Co.

Information Technology Equipment – Safety – Part 1: General RequirementsUL 60950-1 2nd Edition, Dated March 27, 2007 & CAN/CSA-C22.2 No. 60950-1-07, 2ndedition, Dated March 27, 2007

(360) 896 2020Grant [email protected]

Page 1 of 27

Report No. SZ09040028-1Logitech, Inc.

Page 2 of 27 Issued: 6-May-2009Revised: 30-Apr-2010

ProductBrand name

Description

ModelsModel SimilarityRatings

--Input: 120Vac, 60Hz, 208mA

The products covered by this report is 2.1 multimedia speaker, classified as Class II andmatched with non-detachable power supply cord and attachment plug NEMA 1-15P. There aretwo version different amplified boards used with the same model no.

S-00093

2.0 Product Description

Speaker System Z-313Logitech

ED 8.9.4 (8-Jan-10) Mandatory



Photo 1 - Front view

Photo 2 - Bottom and rear view

3.0 Product Photographs

1

2 34





Photo 3 - Satellite Speaker View

Photo 4 - Internal View

6

5





Photo 5 - Component side View

Photo 6 - PCB layout View

8 7

T4AL, 125V





Photo 7 - Internal View for single rectified board separate from alternative amplified board

Photo 8 - PCB layout View for single rectified board separate from alternative amplified board

T4AL, 125V





Photo 9 - Component side View for alternative amplified board

Photo 10 - PCB layout View for alternative amplified board




Photo #

Item

no.1Name

Manufacturer/

trademark2 Type / model2Technical data and securementmeans

Mark(s) of

conformity3

1 1 Power cordset Various NISPT-2300V, VW-1, 105°C, 18AWG x2C, with plug configuration NEMA1-15P, 10A, 125V.

cULus

2 2Woodenenclosure

Various VariousPressing wood with dimension 220x 150 x 220 mm, min. thickness9.0 mm, fixed by glue.

NR

2 3 Subwoofer Various Various4Ω, 15W, fixed on bottomenclosure.

NR

2 4Plastic material ofrear enclosure

FormosaChemicals & FibreCorp Plastics DIV

HP8250 50°C, HB, Min. thickness: 2.6 mm cURus

3 5 Satellite Speaker Various Various 4Ω, 5W, 2pcs provided. NR

4 6 Mains transformerEastern FrontierCo., Ltd

2-9524T

EI-57. Rated input: 120 Vac, 60Hz; Output: 13.5 V, 1900 mA,fixed by 2 screws on bottom insideof enclosure, Pri. winding: Ф0.27mm x 740Ts, Sec. winding: Ф0.7mm x 96Ts.

Tested withappliance

4 6A BobbinEI Dupont DeNemours & Co Inc

101F(+)(f1)V-2, 130°C, Min. thickness: 0.7mm.

cURus

Ta Win Industries(M) SDN BHD

UEW 130°C URus

Various Various 130°CURus orcURus

Dongguan ShinYahua ElectronicMaterial Co Ltd

PZ 130°C URus

Jingjiang YahuaPressure SensitiveGlue Co Ltd

PZ 130°C URus

4 6D Thermal linkAUPO ElectronicsLtd

A5-F 250V, 2A, 135°C cURus

Hang Lee IndustrialCo

1672 300V, VW-1, 105°C, 22AWG cURus

Various 1672 300V, VW-1, 105°C, 22AWG cURus

Hang Lee IndustrialCo

1015 600V, VW-1, 105°C, 20AWG cURus

Various 1015 600V, VW-1, 105°C, 20AWG cURus

Tai Ping CircuitsTechnology Ltd

Various 130°C, V-0 URus

Various Various 130°C, V-0 URus

Hollyland Co Ltd 51S, 51S(P) 125V, T 4A L, soldered on PCB cULus

Various Various 125V, T 4A L, soldered on PCB cULus

7

Pri. Lead wire

Sec. Lead wire

All PCB

Current fuse

6B

6C

6E

6F

4

4

4

5

4.0 Critical Components

Magnet wire

Insulation tape

4

5 8




Photo #

Item

no.1Name

Manufacturer/

trademark2 Type / model2Technical data and securementmeans

Mark(s) of

conformity3

4.0 Critical Components

5 9Heat sink (notshown)

Various VariousMetallic, Min. Thickness: 1.0 mm,with dimenstion 86 mm (W) x 120mm (L) x 25 mm (H)

NR

ChangyuanElectronics(Shenzhen) Co Ltd

Changbao102,CB-HFT

125°C, 600V, VW-1 cURus

Shenzhen WoerHeat-shrinkableMaterial Co., Ltd

RSFR-H 125°C, 600V, VW-1 cURus

Heat shrinkabletube (not shown)

5 10

3) Indicates specific marks to be verified, which assures the agreed level of surveillance for the component. "NR" - indicates Unlisted andonly visual examination is necessary. "See 5.0" indicates Unlisted components or assemblies to be evaluated periodically refer to section5.0 for details.

NOTES:

1) Not all item numbers are indicated (called out) in the photos, as their location is obvious.

2) “Various“ means any type, from any manufacturer that complies with the "Technical data and securement means" and meets the "Mark(s)of conformity" can be used.




No Unlisted CEC components are used in this report.

5.0 Critical Unlisted CEC Components




2. Mechanical Assembly - Components such as switches, fuseholders, connectors, wiring terminals and displaylamps are mounted and prevented from shifting or rotating by the use of lockwashers, starwashers, or othermounting format that prevents turning of the component.

3. Corrosion Protection - All ferrous metal parts are protected against corrosion by painting, plating or theequivalent.

4. Accessibility of Live Parts - All uninsulated live parts in primary circuitry are housed within a non-metalenclosure constructed with no openings other than those specifically described in Sections 4 and 5.

5. Grounding - No grounding connection provided within the equipment.6. Polarized Connection - No polarized power supply connection required for the equipment.7. Internal Wiring - Internal wiring is routed away from sharp or moving parts. Internal wiring leads terminal are

soldered on PCB prior to hook.8. Schematics - Refer to Illustration No. 2 - 9 for schematics requiring verification during Field Representative

Inspection Audits.9. Markings - The product is marked on as labeling system as described as follows:

- manufacturer's name,trade name or trade mark,- model number,- electrical ratings(volts, input current & frequency), -Symbol for Class II equipment.- ETL, CETL logo. Refer to Illustration No. 1 for details.

10. Cautionary Markings - Refer to Illustration No. 1 for details.11. Installation, Operating and Safety Instructions - Instructions for installation and use of this product are

provided by the manufacturer. When applying in Canada, instructions in both French and English arerequired. Refer to Illustration No. 10 & 11 for details.

6.0 Critical FeaturesRecognized Component - A component part, which has been previously evaluated by an accredited certificationbody with restrictions and must be evaluated as part of the basic product considering the restrictions as specifiedby the Conditions of Acceptability.

Listed Component - A component part, which has been previously Listed or Certified by an accreditedCertification Organization with no restrictions and is used in the intended application within its ratings.

1.

descriptions. All dimensions are approximate unless specified as exact or within a tolerance. In addition to thespecific construction details described in this Report, the following general requirements also apply.

Spacing - In primary circuits, 1.0 mm minimum spacing are maintained through air and 1.6 mm over surfacesof insulating material between current-carrying parts of opposite polarity before thermal link, 2.0 mmminimum spacing are maintained through air and 3.2 mm over surfaces of insulating material between suchcurrent-carrying parts and low voltage isolated circuits.

Critical Features/Components - An essential part, material, subassembly, system, software, or accessory of aproduct that has a direct bearing on the product’s conformance to applicable requirements of the productstandard.Construction Details - For specific construction details, reference should be made to the photographs and

Unlisted Component - A part that has not been previously evaluated to the appropriate designated componentstandard. It may also be a Listed or Recognized component that is being used outside of its evaluated Listing orcomponent recognition.




Illustration 1 - Marking (representative)

7.0 Illustrations

Note: The ETL, CETL logo shall not be less than 8 mm in width and in height, “C” and “US” and the control No. “3121678” shall not be less than 2 mm in height, "Intertek" shall be at least 3 mm in height and “CM” shall be atleast 1 mm in height. The “CONFORMS TO UL STD. 60950-1” and “CERTIFIED TO CAN/CSA STD. C22.2 No.60950-1-07” shall not be less than 1.5 mm in height.




7.0 Illustrations

Illustration 2 - Circuit diagram




7.0 Illustrations





7.0 Illustrations

Illustration 5 - Circuit diagram for single rectified board separate from alternative amplified board




7.0 Illustrations

Illustration 6 - Circuit diagram for alternative amplified board




7.0 Illustrations





7.0 Illustrations

Illustration 10 - User manual in English




7.0 Illustrations

Illustration 11 - User manual in French




Evaluation Period Project No. SZ09040028

Sample Rec. Date 01 Apr. 2009 Condition Prototype Sample ID.Z09040028-001,Z09040028-002,Z09040028-003

Test Location

Test Procedure

Completed by: Reviewed by:Title: Title:

Signature: Signature:

Marking Durability test 1.7.11

5.25.3

4.2.44.2.5

4.5.55.1

2.10.3 & 2.10.42.10.5.1 & 2.10.5.2

Ball Pressure TestTouch Current Test

Cord Anchorages and Strain Relief TestMechanical Strength - 10N Force Test

1.6.2

2.1.1.1b2.1.1.1c

2.2.22.2.32.9.2

4.2.74.5.2

3.2.64.2.2

8.0 Test Summary

Intertek Testing Services Shenzhen Ltd. Kejiyuan Branch(Address: 6F, D Block, Huahan Building, Langshan Road, Nanshan District, Shenzhen,China)Testing Lab

Test Description

01 Apr. - 28 Apr. 2009/ 25 Mar. - 26 Apr. 2010

Determination of the result includes consideration of measurement uncertainty from the test equipment andmethods. The product was tested as indicated below with results in conformance to the relevant test criteria.The following tests were performed:

UL 60950-1 2nd Edition, Dated March 27, 2007 &CAN/CSA-C22.2 No. 60950-1-07, 2nd edition, Dated

March 27, 2007

Input current

Finger Test

Signature on file

Senior Project Engineer

Pin TestVoltage under normal conditions testVoltage under fault conditions testHumidity Condition Test

Clearances and Creepage Distances MeasurementsSolid Insualtion Measurement

Determination of Working Voltage Test 2.10.2

A representative sample of the product covered by this report has been evaluated and found to comply with theapplicable requirements of the standards indicated in Section 1.0.

Ruby Yan

Mechanical Strength - 250N Force TestSteel Ball Impact Test

Electric Strength TestAbnormal Operations and Fault Conditions Test

Stress Relief TestTemperature rise test

Project EngineerJack Yang

Signature on file

8.1 Signatures




BASIC LISTEE

Address

CountryProduct

MULTIPLE LISTEE 1Country

Brand Name

ASSOCIATEDMANUFACTURER

AddressCountry

BASIC LISTEE MODELS

MULTIPLE LISTEE 2AddressCountry

Brand Name


AddressCountry

BASIC LISTEE MODELS

MULTIPLE LISTEE 3AddressCountry

Brand Name


AddressCountry

BASIC LISTEE MODELS

USA

9.0 Correlation Page For Multiple ListingsThe following products, which are identical to those identified in this report except for model number and Listeename, are authorized to bear the ETL label under provisions of the Intertek Multiple Listing Program.

Logitech, Inc.

1499 SE Tech Center Place, Suite 350 Vancouver, WA 98683-9575

Speaker System Z-313

None

MULTIPLE LISTEE 2 MODELS

None



None




10.0 General InformationThe Applicant and Manufacturer have agreed to produce, test and label ETL Listed products in accordance withthe requirements of this Report. The Manufacturer has also agreed to notify Intertek and to request authorizationprior to using alternate parts, components or materials.

COMPONENTSComponents used shall be those itemized in this Intertek report covering the product, including any amendmentsand/or revisions.

LISTING MARKThe ETL Listing mark applied to the products shall either be separable in form, such as labels purchased fromIntertek, or on a product nameplate or other media only as specifically authorized by Intertek. Use of the mark issubject to the control of Intertek.MANUFACTURING AND PRODUCTION TESTSManufacturing and Production Tests shall be performed as required in this Report.

FOLLOW-UP SERVICEPeriodic unannounced audits of the manufacturing facility (and any locations authorized to apply the mark) shallbe scheduled by Intertek. An audit report shall be issued after each visit. Special attention will be given to thefollowing:

1. Conformance of the manufactured product to the descriptions in this Report.2. Conformance of the use of the ETL mark with the requirements of this Report and the Certification Agreement.

3. Manufacturing changes.4. Performance of specified Manufacturing and Production Tests.

In the event that the Intertek representative identifies non-conformance(s) to any provision of this Report, theApplicant shall take one or more of the following actions:

1. Correct the non-conformance.2. Remove the ETL Mark from non-conforming product.3. Contact the issuing product safety evaluation center for instructions.

10.1 Evaluation of Unlisted Components

Note to Intertek Follow Up Inspector: The Component Evaluation Center, CEC, will notify you in writingwhen these components must be selected and sent to the CEC for re-evaluation

Ship the samples to:Intertek Testing Services Shenzhen Limited Guangzhou Branch

ETL Component Evaluation CenterBlock E, No. 7-2 Guang Dong Software Science Park, Caipin Road, Guangzhou ScienceCityCETDD Guangzhou, China.Attn: Ms. Joey KuangSample Disposition: Due to the destructive nature of the testing, all samples will bediscarded at the conclusion of testing unless, the manufacturer specifically requests thereturn of the samples. The request for return must accompany the initial componentshipment.

Because Unlisted Components are uncontrolled, and they do not fall under a third party follow up program,Intertek may require these components to be tested and/or evaluated at least once annually, more often forcertain components, as part of the independent certification process. The Unlisted Components in Section 5.0require testing and/or evaluation as indicated.




Product Test Voltage Test TimeAll products covered by this Report. 2000 V 1 s

Products Requiring Dielectric Voltage Withstand Test:

Test Equipment

The test equipment shall incorporate a voltmeter in the output circuit to indicate directly the applied test potentialif the rated output of the test equipment is less than 500VA.

The test equipment shall incorporate a transformer with an essentially sinusoidal output, a means to indicate theapplied test potential, and an audible and/or visual indicator of dielectric breakdown.

The test voltage specified below shall be applied between primary circuits and accessible dead-metal parts. Thetest voltage may be gradually increased to the specified value but must be maintained at the specified value forone second or one minute as required.

If the rated output of the test equipment is 500VA or more, the applied test potential may be indicated by either:1 - a voltmeter in the primary circuit;2 - a selector switch marked to indicate the test potential; or3 - a marking in a readily visible location to indicate the test potential for test equipment having a single testpotential output.In cases 2 and 3, the test equipment shall include a lamp or other visual means to indicate that the test potentialis present at the test equipment output. All test equipment shall be maintained in current calibration.

11.0 Manufacturing and Production TestsThe manufacturer agrees to conduct the following Manufacturing and Production Tests as specified:

Required TestsDielectric Voltage Withstand Test

One hundred percent of production of the products covered by this Report shall be subjected to a routineproduction line dielectric withstand test.

The test shall be conducted on products, which are fully assembled. Prior to applying the test potential, allswitches, contactors, relays, etc., should be closed so that all primary circuits are energized by the test potential.If all primary circuits cannot be tested at one time, then separate applications of the test potential shall be made.

11.1 Dielectric Voltage Withstand TestMethod


listing constructional data report (cdr)...photo 8 - pcb layout view for single rectified board...

Documents