lms installation.guide
TRANSCRIPT
SOCIAL SECURITY SYSTEM
LMS DISKETTE PROJECT
INSTALLATION GUIDEVERSION 2.0
August 2005
PREPARED BY:
Applications Development & Maintenance Department I
Information Technology Management Group
file:///C:/Documents and Settings/jeric/My Documents/Downloads/SSS...file:///C:/Documents and Settings/jeric/My Documents/Downloads/SSS...
1 of 7 8/22/2011 2:30 PM
17 August, 2005
C E R T I F I C A T I O N
This is to certify that the INSTALLATION GUIDE for The LMS Diskette Project submitted by the ApplicationsDevelopment and Maintenance I has been reviewed and has complied with the user’s specifications andrequirements.
MA. SALOME ROMANO
OIC, Planning andStandardsDepartment
AUTHOR/S
AUTHOR : Jonathan E. Mendoza
Junior Programmer
ADM I
ADDRESSEE : Van Rene M. Orpilla
Department Head
ADM I
Social Security System
East Avenue, Diliman
Quezon City, Metro Manila
Philippines
Purpose
The purpose of this document is to provide the installation requirements of LMS Diskette Project v2.0 and steps necessary to installthe program on LMS workstation.
file:///C:/Documents and Settings/jeric/My Documents/Downloads/SSS...file:///C:/Documents and Settings/jeric/My Documents/Downloads/SSS...
2 of 7 8/22/2011 2:30 PM
Audience
This guide is intended for use by the company's personnel/staff responsible in the processing of payments for its employees' SSSloans.
How to use this manual/guide
I Installation This chapter tackles the installation procedure for the LMS Diskette program.
YOUR COMMENTS ARE WELCOME
The Information Technology Management Group values and appreciates your comments as a user andreader of this User’s Manual. It would greatly help in designing future enhancements of the system.
Please address all comments to:
HELPDESK
Data Computer Operations Department
IT Management Group
Ground Floor, SSS Main Office
East Avenue, Diliman, Quezon City
Direct Line/s : 9243448/4359832
Trunk Line : 9206401 Local 5697/5699
Fax Number : 9243448
TABLE OF CONTENTS
AUTHOR/S *
PURPOSE ……………………………………………………………………………………………….iii
HOW TO USE THIS MANUAL/GUIDE ……………………………………………………………… iv
YOUR COMMENTS ARE WELCOME v
TABLE OF CONTENTS ...…...…………………………………………...………………………….. vi
CHAPTER 1 – INSTALLATION 11
SYSTEM REQUIREMENTS ………………………………………………………………… 121.INSTALLATION GUIDE ..…………………………………………………………………… 122.
3.
file:///C:/Documents and Settings/jeric/My Documents/Downloads/SSS...file:///C:/Documents and Settings/jeric/My Documents/Downloads/SSS...
3 of 7 8/22/2011 2:30 PM
CHAPTER
1 Installation
The user is advised to go through this chapter. This chapter providesgeneral instructions on how to install the application to your computer.
CHAPTER 1 – INSTALLATION
1.1 SYSTEM REQUIREMENTS
The LMS Diskette Project v2.0 application program is designed specifically for Windows XP/2000/Milleniumedition using the WIN32 API to allow GUI environment. To function properly, the program must be installed on asystem that includes the following hardware and software components (minimum):
166 MHZ Pentium IV or equivalent
128 MB memory
4 MB extra hard disk space
VGA Display
Windows XP/2000/Millenium Edition
1.44 MB Floppy Disk Drive
1.2 INSTALLATION GUIDE
LMS Diskette Project v2.0 setup is provided on 4 floppy disks or CDROM or bundled "Package" directorywhich can be distributed through the network. This is also available from the SSS official website. Theinstallation follows the standard Windows procedure. To install:
Insert the CD or Floppy Disk1, or get/map a copy of the installation package from the SSS website.1.From the Start Menu. Select Run:2.
file:///C:/Documents and Settings/jeric/My Documents/Downloads/SSS...file:///C:/Documents and Settings/jeric/My Documents/Downloads/SSS...
4 of 7 8/22/2011 2:30 PM
The Run Popup Window appears. Type the drive letter and SETUP or Browse and select SETUP from thepackage directory of files. Click the "OK" button.
3.
The LMS Tape Diskette Project v3.0 Setup program will display the Installation/Welcome dialog box. Follow theinstructions then click the "OK" button.
4.
Enter the Destination Drive and Directory by clicking on the "Change Directory" button from the dialog box.The default drive and directory is "c:\Program Files\SSS LMS". Click the Install button to continue theinstallation.
5.
file:///C:/Documents and Settings/jeric/My Documents/Downloads/SSS...file:///C:/Documents and Settings/jeric/My Documents/Downloads/SSS...
5 of 7 8/22/2011 2:30 PM
Enter a New Group (default is SSS_LMS) or Select the desired Program Group from the existing group lists andclick the "Continue" button.
6.
When the installation dialog displays the message "SSS LMS Setup was completed successfully." Click the"OK" button.
7.
A shortcut is automatically created to the windows program list.8.
file:///C:/Documents and Settings/jeric/My Documents/Downloads/SSS...file:///C:/Documents and Settings/jeric/My Documents/Downloads/SSS...
6 of 7 8/22/2011 2:30 PM
The installation is complete.9.There may be cases that during the installation an error would occur. Just click the "Retry" or "Ignore" buttonto proceed. Then click on "Yes" button. Cases like this happens when other applications are open and usingthe same resource files that are being installed during the setup.
10.
file:///C:/Documents and Settings/jeric/My Documents/Downloads/SSS...file:///C:/Documents and Settings/jeric/My Documents/Downloads/SSS...
7 of 7 8/22/2011 2:30 PM