load testing machine application
TRANSCRIPT
-
7/29/2019 Load Testing Machine Application
1/12
-
7/29/2019 Load Testing Machine Application
2/12
has several uses but this presentation will
cable heads and single strands of wireline.
.consist of a tool holder, a wireline clamp, a
, ,section and the recording section.
-
7/29/2019 Load Testing Machine Application
3/12
-
7/29/2019 Load Testing Machine Application
4/12
Reasons for Tensile Testing
Training: Many times the newest members of thewre ne companes are respons e or u ng e ca ehead. Previously there has not been a way to test tomake sure technique has not been lost.
nsurng e ua y o our ne: ow many mes avewe told our People to cut back to good Line? Good
line is a relative term. Now we can give our people a ". .example.Safety: We have all heard or seen a string of tools fall to
.Engineers check our crane blocks frequently but youdont see them checking cable heads. Now there is adevice to do just that.
-
7/29/2019 Load Testing Machine Application
5/12
Cable Records: By keeping a record of the tensile strength of
be replaced. Confidence in weak points given to our customer: How many times
have we given a customer a point at which the head was supposedto part an t came out eary? By c ec ng t e ca e ea once aweek after a job, for several weeks, your young engineer will be able
to tell a customer with confidence where the head will part. He willknow his fatigue factor He also did not have to lose any thing in thewe o ga n a nowe ge.
Knowing when your line has been in corrosive fluids: By checkingyour tensile strength you will have a record of previous strengthsand can catch a dama ed line uicker. Also ou will have hard
numbers to take back to the customer. No more twisting wire in frontof someone that only understands numbers.
-
7/29/2019 Load Testing Machine Application
6/12
Placement of Cable head inac ne
De endin on the
style cablehead aperson needs only 5-
wireline on the head.
It is threaded throu ha typical wirelineclamp, the clamp is
,jack is pumped untilthe wire is parted.
-
7/29/2019 Load Testing Machine Application
7/12
This devise is mounted in
pace o e wre neclamp on the Load TestMachine and pulls a
same radius as most
cones have. Along withthe L.T. Machine it ivesan accurate test of asingle strands strengthand takes only
approxma e yseconds to cut your wire,thread through the
, .
-
7/29/2019 Load Testing Machine Application
8/12
The L.T. Machine has
a duel mechanicaland a duel electrical.
consist of one 5000
Lb/ si and a 600Lb/psi mechanicalgauge. Also a 5000
Lb/psi electronicgauge.
-
7/29/2019 Load Testing Machine Application
9/12
-
7/29/2019 Load Testing Machine Application
10/12
that have been pull tested. The data istransferred to M Docs/M Data and isretrained there so that it can be utilized.
The next slide shows a Head that hasbeen pulled tested. As you can see notescan be recorded on the test and tension
can e e ermne s mpy y po n ng ecurser at a point and right clicking.
-
7/29/2019 Load Testing Machine Application
11/12
-
7/29/2019 Load Testing Machine Application
12/12