local solutions for individual customers worldwide · nbr/fkm (iso 3601) and ptfe operating...
TRANSCRIPT
Local Solutions For Individual Customers Worldwide
Product OverviewQuick Release Couplings
Quick Release Couplings Product Overview
2 www.stauff.com
VOSWINKEL couplings have proven their value over many years of practical use in hydraulic systems. The superior quality of our couplings is the result of our continuous product improvement, taking the experience and feedback from our customers and end users into consideration. Our high production standards, combined with our quality management system certified in accordance with EN ISO 9001, assures the quality of our products.
In 2015 VOSWINKEL became a part of the STAUFF group.
For the technical specifications of the individual couplings please refer to the respective sections in our full product catalog. The couplings of the series HP, HS, FH, HA, BP and RK/RH have the following common characteristics:
Housing materials:Steel according to EN 10277 all couplings Except FH-VA, Stainless Steel according to EN 1.4404
Coatings:Chrome III (Zn-Fe)–Coupling Series HP, AP, ZP, HX, UX, BP, and HS.Zinc-Nickel-Couplings Series FH, FU, MK, FT, RK/RH, PS and FP.
Seals:NBR/FKM (ISO 3601) and PTFE
Operating temperature:-20°C to + 100°C (-4°F to 212°F) with NBR Seals-25°C to + 200°C (-13°F to 392°F) with FKM Seals
Reference Specifications:EN ISO 8330:2000, ISO 5675, ISO 5676, ISO 7241, ISO 16028, AMD1
We can modify products and materials to meet your requirements.
The operating pressures specified in our catalogs are based on the design and materials of the components of our couplings. System pressure is determined by all of the components and adapters, and is limited by the operating pressure of the individual components or connected couplings, whichever is lower. Any alteration or modification of the couplings is prohibited. In any case where couplings are disassembled, tampered with or not repaired with original replacement parts, all warranty claims will be voided.
We reserve the right to make technical changes due to product improvements.
VOSWINKEL offers a wide range of products for agricultural machinery as well as for hydraulic systems of vehicles and construction equipment. Owing to the modular design, a large variety of connections conforming to international standards is available.
Ordering Codes
SeriesQuick release coupling acc. to ISO 7241-1, Series A, Push-Pull type
Quick release coupling acc. to ISO 7241-1, Series A, Push-Pull type, sleeve of die-cast zinc
Quick release coupling acc. to ISO 7241-1, Series A, Push-Pull type, breakaway-coupling
Flat face coupling acc. to ISO 16028, AMD1
Flat face coupling, connect under pressure
Flat face coupling acc. to ISO 16028, stain-less steel
Coupling for tractor braking system acc. to ISO 5676
Screw on type coupling
Screw on type coupling flat face
Pipeline coupling
Screw on type coupling
Quick release coupling, plastic construction
Multi coupling systems
HP
ZP
AP
DN Size
HP 10 -
ComponentDust capFemale body with valveMale tip with valveFemale body with dust plugMale tip with dust capFemale body with fixed dust protectionMale tip without valveFemale body without valveComplete Coupling AssemblyDust plug
FUFH
FH-VA
BP
HS
FTRK/RH
PSKNMK
0123456789
1 - IUF08
Port Type/SizeMale thread BSP acc. to DIN 3852
Male thread metric acc. to DIN 3852
Female thread BSP acc. to DIN 3852
Female thread metric acc. to DIN 3852
Female thread NPTF
Female thread UNF
24 ° cone / DIN 2353 light series
24 ° cone / DIN 2353 heavy series
24 ° cone / DIN 2353, light series, bulkhead
24 ° cone / DIN 2353, heavy series, bulkhead
Flange acc. SAE
Hose connection
AGF
IGF
INF
L
IUF
NT
AFSSL
AMF
IMF
S
www.stauff.com 3
Quick Release CouplingsCharacteristics
HP Series Quick Release Couplings
Push-Pull TypePoppet Valve
Product DescriptionOne of the standard couplings used for agricultural machinery. The double-acting sliding sleeve is fixed in the locked position by means of a pre-stressed spring. For the purpose of uncoupling it can slide in both axial directions. The two halves of the plug-type coupling are locked together securely with precision snap-in balls.
The sliding sleeve can be installed in a bulk head with retaining rings. In this way, the carrier can function as a breakaway coupling. Should a probe be torn away from a carrier installed in this way, the system is decoupled and the valves close automatically, thus preventing damage to the hose and possible loss of oil.
Interchange / Brands � ISO 7241-1(A) / Faster / DNP / Parker / EATON
Coating: � Chrome III (Zn-Fe)
Seals: � NBR
Features • Designed in accordance with ISO 7241-1(A) • Can be installed to use as a Breakaway coupling • Hardened retaining ring secures internal valve • Robust ball locking mechanism
Applications • Agricultural Machinery • Hydraulic Attachments and Implements • Hydraulic Systems – Vehicle and Construction Equipment
UX/HX Series Quick Release CouplingsConnect Under PressureHigh Flow Poppet Valves
Product DescriptionAn extension of the HP product line, flow efficiency is increased in this series by means of the new HX connector. The function and development of this male connector can be used in both standard applications as well as extreme requirements. The geometry of the male connector, width across flats and connection options correspond to the VOSWINKEL HP Series.
Working in connection with the HX coupling, the newly developed UX female body offers safe use in high back-flow applications. The newly developed single-hand male connector can be engaged in the female body under full operating pressure. Further advantages include the breakaway function and a lower coupling and uncoupling force.
Interchange / Brands � ISO 7241-1(A) / ISO 5676 / Parker RSD 501 / Faster 3CFPV
Coating: � Chrome III
Seals: � NBR / PTFE
Features • ISO 7241 / ISO 5676 • Push-pull function • Mechanical locking system • High-flow valve unit • Reduced pressure drop • 240 lpm (63.4 gpm) return volumetric flow
Applications • Heavy-duty tractors • Heavy Load Implements • Tipper Trailers
Quick Release Couplings Characteristics
4 www.stauff.com
HS SeriesQuick Release CouplingsScrew-on Type Poppet Valves
FH Series Quick Release CouplingsFlat Face Type
Product DescriptionScrew-type couplings of the HS series are coupled by simply joining the male and female halves together until the thread contacts the limit stop. The coupling is designed to open both valves at the same time when fully engaged. For this reason, and due to their rugged design, they are particularly well suited for heavy-duty service conditions in construction machinery.
The range of operating pressures of this series is higher than that of the HP series. Screw-type couplings of the HS series can be coupled on both sides under pressure of up to 50 bar (725 psig). The self-locking connection thread prevents any disengagement of the screw connection caused by vibration. The screw sleeve of the probe, when correctly locked, must cover the black brake ring of the carrier.
Our well-balanced range of products offers a wide spectrum of couplings for hydraulic systems on construction equipment and agricultural machinery. Owing to the modular design, a large variety of connections conforming to international standards are available.
Product DescriptionThe FH series represents a significant advancement on the long standing and proven flat seal couplings through the use of better quality materials, which allows for even higher operating pressures than those pressures stated in the standard ISO 16028.
The function of the flat seal couplings is widely known. In addition to these features, safety is designed into the series FH in that all sizes are equipped with a safety system against accidental decoupling which the user can activate as an option. The construction of the flat valves ensures that coupling and decoupling only leads to minimum oil losses and/or air locks.
Interchange / Brands � ISO 14541 / Faster / DNP / Parker
Coating: � Chrome III (Zn-Fe)
Sealing: � NBR / PTFE
Features • According to ISO 14541 • High operating pressures up to 450 bar (6500 psig) • Valve opening on connection • Robust construction • Self-locking connecting thread • Minimum pressure loss • Limit stop with O-ring seal • High performance flow characteristics.
Applications • High pressure, high impulse hydraulics • Construction, Agriculture • Heavy duty applications • Hydraulic hammers
Interchange / Brands � ISO 16028 / Faster / DNP / Stucchi / CEJN / Parker / Eaton / Safeway / Dixon
Coating: � Zinc-Nickel � Also available in Stainless Steel
Seals: � NBR / PTFE
Features • According to ISO 16028 • Flat face - minimal leakage during coupling • Maximum operating pressure 350 bar (5075 psig) • Extended protection • Zinc-nickel plated • No air inclusions in the hydraulic circuit • High performance flow characteristics • Equipped with decoupling safety system • Available in Stainless Steel
Applications • Agriculture machinery • Construction machinery • Hydraulic attachments & implements • Hydraulic hammers
www.stauff.com 5
Quick Release CouplingsCharacteristics
FT SeriesQuick Release Couplings
Screw-on Type Flat Face Valves
Product DescriptionThe FT series is an advanced design and construction version of the FH flat face coupling. The screw-on type coupling is a safe and reliable connection for applications in critical and extreme environments.
The flat face valve design of the coupling has extremely low leakage. Operation is possible at extreme pressures up to 550 bar (7975 psig) (working pressure depends on size).
The FT series can be coupled with a high residual pressure.
Interchange / Brands � CEJN / Stucchi
Coating: � Zinc-Nickel
Seals: � NBR / PTFE
Features • Flat face-minimal leakage during coupling • Connectable under operating pressure up to 300 bar (4350 psig) • No air inclusions in the hydraulic circuit • High performance flow characteristics • Tested in accordance with API 16 D and acc. EUB Directive #36.
Applications • Oil & gas industry - blowout preventer (BOP) • Mobile & stationary boring installations • Construction machinery • High pressure hydraulics • Mobile power packs • Hydraulic attachments & implements • Hydraulic hammers
RK/RH Series Quick Release Couplings
Pipeline Couplings Flat Face Valves
Product DescriptionThe RK/RH coupling series are used for flawless connection of hydraulic lines without the inclusion of air and permit separation without any loss of medium.
This series is particularly suited for rugged applications. To guarantee optimum durability as well as no leakage during the application, it is necessary to screw the female and the male part together until the body threads are fully engaged.
Due to design modifications it is possible (depending upon size) to charge the male and female side uncoupled to a pressure up to 420 bar, without destroying any components.
Interchange / Brands � TCH Type 60/61
Coating: � Zinc-Nickel
Seals: � NBR / PTFE
Features • Market leader in heavy duty trailer couplings • Flat face - minimal leakage during coupling • Disconnect under full pressure • Low air inclusion during coupling
Applications • Heavy Duty Transportation • Trailers and Modules • Drilling and Boring Equipment • Construction Machinery
Quick Release Couplings Characteristics
6 www.stauff.com
PS SeriesQuick Release CouplingsScrew-on Type For Hammer Applications
FP Series Quick Release CouplingsFlat Face TypeHigh Pressure Applications
Product DescriptionThe heavy duty coupling series PS belongs to the category of screw-on type couplings and has been developed especially for hammer applications on constructionmachinery. It is designed especially for working with high volume flow rates up to 1000 lpm (265 gpm).
For heavy duty applications, these couplings are designed to ensure that the material and the function of the couplings can perform under the highest mechanical load.
Product DescriptionThe series FP is a flat-sealing push-fit coupling with safety locking for special high pressure applications up to 720 bar (10,440 psig) operating pressure.
Interchange / Brands � None
Coating: � Zinc-Nickel
Seals: � NBR / PTFE
Features • Working pressure up to 420 bar (6090 psig) • High flow rates until maximum 1000 lpm
(265 gpm). • Maximum pulse strength • Zinc-Nickel coating for best resistance against corrosion • Patented valve unit
Applications • Hammer Applications • High Impulse Hydraulics
Interchange / Brands � Stucchi Series A-HP
Coating: � Zinc-Nickel
Seals: � NBR / PTFE
Features • Working pressure up to 720 bar (10,440 psig) • High quality zinc-nickel surface • Safety locking, optical recognition • No air inclusions in the hydraulic circuit • Limited pressure loss • Simple design
Applications • Industry, plant construction • Hydraulic rescue equipment • Railways, mobile tools • Wind power plants, power plant construction • Offshore / onshore • Construction machinery
MK Series Quick Release CouplingsMulti-Coupling TypeFlat Face Valves
Product DescriptionThe multi-coupling QUICKVOS™ has been created for connecting and disconnecting several hydraulic lines simultaneously. This is accomplished by engaging the two coupling plates with a single lever which is designed for a minimum of operating force. The hydraulic lines are connected with flat face couplings. It is possible with special seals to couple against trapped pressure on the male halves.
Interchange / Brands � ISO 16028 / Faster
Coating: � Zinc-Nickel
Seals: � NBR / PTFE
Features • Safety against incorrectly connected hydraulic lines • Quick connecting • Coupling against trapped pressure • Optimally minimized leakage during coupling process
Applications • Farm attachments • Tractors • Front Loaders
www.stauff.com 7
Quick Release CouplingsCharacteristics / Technical Data
Accessories for all couplings series • Dust cap for male tip • Dust plug for female body • Dust Cover Clips and Bodies • Marking Clips for Dust covers • Anchor bracket for male tips • Replacement Seal Kits
Coupling
BG DN
Bore Area Max Flow Pressure Drop WorkingBurst Pressure (bar)
Series Amin Qmax @ max. flow Pressure
(mm2) (lpm) (bar) (bar) Connected Female Body Male Tip
HP04 1 1/4" 24 20 10 250 1000 1000 1000
HP08 2 3/8" 45 40 4 250 1000 1000 1000
HP10 3 1/2" 76 80 4 250 1000 1000 1000
HP12 4 3/4" 130 120 2 250 1000 1000 1000
HP20 6 1" 256 160 1 250 1000 1000 1000
FH06 1 1/4" 29 40 6 400 2000 1220 1850
FH10 2 3/8" 63 80 8 350 1500 1100 1100
FH12 3 1/2" 147 120 10 350 1500 1050 1050
FH16 4 3/4" 127 140 4 350 1200 1200 1100
FH19 6 1" 156 180 2 350 1450 1050 1050
FH25 8 1 1/4" 251 260 4 350 800 800 800
FU10 2 3/8" 63 80 10 350 1700 0 1500
FU12 3 1/2" 147 120 7 350 1500 0 1400
FU19 6 1" 156 180 4 350 1600 0 1600
FH10 VA 2 3/8" 63 80 8 250 1000 1000 1000
FH12 VA 3 1/2" 147 120 9 250 1000 1000 1000
FH19 VA 6 1" 156 180 2 250 1000 1000 1000
BP10 3 1/2" 0 70 9 150 310 75 150
HS04 1 1/4" 24 20 10 450 1800 1400 1400
HS08 2 3/8" 45 40 4 450 1600 1750 1550
HS10 3 1/2" 76 80 3 400 1400 1200 1200
HS12 4 3/4" 130 120 2 400 1500 1600 1200
HS20 6 1" 256 160 1 300 1180 1500 1100
HS25 8 1 1/4" 660 220 1 300 1800 1600 1200
FT10 2 3/8" 63 80 10 550 1400 1000 1400
FT12 3 1/2" 147 120 7 550 1400 1000 1400
FT19 6 1" 156 180 4 550 1400 1050 1400
FT25 8 1 1/4" 0 0 6 470 1300 1000 1300
RH08 2 3/8" 55 40 2 420 1800 1680 1200
RH12 3 1/2" 105 70 2 420 1600 1600 900
RH16 4 3/4" 160 105 3 320 1150 1280 1280
RK20 6 1" 285 120 1 350 1200 1250 700
RH25 8 1 1/4" 620 249 0 420 1150 1100 900
PS 32 8 1 1/4" 467 659 6 380 1520 1520 1520
Couplings Technical Data Section
Local Solutions For Individual Customers Worldwide
Quick Release Couplings � English � LIT57 � 05/2016
www.stauff.com
GERMANYWalter Stauffenberg GmbH & Co. KGIm Ehrenfeld 458791 WerdohlTel.: +49 23 92 916 0Fax: +49 23 92 916 [email protected]
A Global Presence with Branches and Dealers in all Industrial Countries.
AUSTRALIASTAUFF Corporation Pty. Ltd.Tel.: +61 2 4271 [email protected]
BRAZILSTAUFF Brasil Ltda.Tel.: 11 47 72 72 [email protected]
CANADASTAUFF Canada Ltd.Tel.: +1 416 282 46 [email protected]
CHINA STAUFF ChinaTel.: +86 21 68 18 70 [email protected]
FRANCESTAUFF S.A.S.Tel.: +33 2 54 50 55 [email protected]
INDIASTAUFF India Pvt. Ltd.Tel.: +91 20 66 20 [email protected]
IRELANDSTAUFF IrelandTel.: +44 28 92 60 69 [email protected]
ITALY STAUFF Italia s.r.l.Tel.: +39 0362 63 80 70 [email protected] KOREASTAUFF Korea Ltd.Tel.: +82 51 266 66 [email protected]
MALAYSIASTAUFF South East Asia Sdn BhdTel.: +60 3 8024 61 [email protected]
NEW ZEALANDSTAUFF Corporation (NZ) Ltd.Tel.: +64 9 271 48 [email protected]
POLANDSTAUFF Polska Sp. z o.o.Tel.: +48 58 660 11 [email protected]
RUSSIAN FEDERATION STAUFF LLCTel.: +7 495 276 16 50 [email protected]
THAILANDSTAUFF (Thailand) Co., Ltd.Tel.: +66 2 721 73 [email protected]
UNITED KINGDOMSTAUFF UK Ltd.Tel.: +44 114 251 85 [email protected]
UNITED STATESSTAUFF CorporationTel.: +1 201 444 78 [email protected]
VIETNAMSTAUFF Vietnam Ltd. Tel.: +84 8 3995 47 [email protected]
www.facebook.com/stauffgroup
www.twitter.com/stauffgroup