locating pins - high hardness stainless steel, … -1627 1 -1628 locating pins - high hardness...
TRANSCRIPT
-16271 -16281
Locating Pins - High Hardness Stainless Steel, Sphere Small HeadPress Fit / Tapped
Locating Pins - High Hardness Stainless Steel, Small Flat HeadPress Fit / Tapped
QFeatures: New Small Sphere Head Type has been added to the High Hardness Stainless Steel Locating Pin product line-up and is priced much lower than the existing products. For orders of up to 1,000 pcs., 7th Day Shipping is available. (For details, see P.1617.) QFeatures: New Small Flat Head Type has been added to the High Hardness Stainless Steel Locating Pin product line-up and is priced much lower than the existing products. For orders of up to 1,000 pcs., 7th Day Shipping is available. (For details, see P.1617.)
QPress Fit
EP, L dimensions in ( ) are applicable to Diamond Shape. EWhen L=3, C=0.5 and L1=1.
Part Number P0.01mm Increment
L1mm Increment
B0.1mm Increment C L1 (W) Unit Price
Round ShapeUnit Price
Diamond ShapeType D
<Round>AQSA (m6)AQSPA (p6) AQSGA (g6) AQSHA (h7)
<Diamond>AQSD (m6)AQSPD (p6)AQSGD (g6)AQSHD (h7)
3 1.00(2.00)~3.00
3(4)~10
2.0~10.0
0.5
1
1.04 2.00~4.00
15 2.00~5.00 1.2
6 2.00~6.00 2.0~12.0 1.5
8 2.00(3.00)~8.00 2.0~15.0 1.5 1.8
10 6.00~10.00
4(5)~20 2.0~20.02
2.2
12 6.00~12.00 2.5
16 6.00~16.00 3 2 4.0
QTapped
EL dimension in ( ) is applicable to Diamond Shape. ENote the strength of under-head part. d P.1618 EPlease confirm pilot hole depth on d P.1618. Holes may go through.* Tightening torque (reference) is of Tightening Torque Strength Class (10.9) indicated on Technical Data d P.2365. Not applicable when using locking materials or lock washers.
Part Number P0.01mm Increment
L1mm Increment
B0.1mm Increment
M(Coarse)
* Tightening Torque N • cm
L1 (W) Unit Price Round Shape
Unit Price Diamond ShapeaType D
<Round> AAQSTA (g6) AQSTHA (h7)
<Diamond> AQSTD (g6)
AQSTHD (h7)
6 4.00~6.00 8(9)~12 2.0~12.0 M3 147 5 1.5
8 6.00~8.00 11(12)~16 2.0~15.0 M4 333 6 1.8
10 7.00~10.00
11(12)~203.0~20.0 M5 676 8
2.2
12 7.00~12.00 2.5
16 8.00~16.00 5.0~20.0 M6 1156 9 4.0
QPress Fit
EWhen L=3, C=0.5 and L1=1.
Part Number P0.01mm Increment
L1mm Increment
B0.1mm Increment C L1 Unit Price
Type D
ADSC (m6)ADSPC (p6)ADSGC (g6)ADSHC (h7)
3 1.00~3.00
3~10
2.0~10.0
0.1
1
4 2.00~4.00
0.55 2.00~5.00
6 2.00~6.00 2.0~12.0
8 2.00~8.00 2.0~15.0
10 6.00~10.00
4~20 2.0~20.0 112 6.00~12.00
16 6.00~16.00 2
QTapped
ENote the strength of under-head part. d P.1618 EPlease confirm pilot hole depth on d P.1618. Holes may go through.* Tightening torque (reference) is of Tightening Torque Strength Class (10.9) indicated on Technical Data d P.2365. Not applicable when using locking materials or lock washers.
Part Number P0.01mm Increment
L1mm Increment
B0.1mm Increment
M(Coarse)
* Tightening Torque N • cm
C L2 Unit PriceType D
ADSTC (g6)ADSTHC (h7)
6 4.00~6.00 8~12 2.0~12.0 M3 147
1
5
8 6.00~8.00 11~16 2.0~15.0 M4 333 6
10 7.00~10.00
11~203.0~20.0 M5 676 8
12 7.00~12.00
16 8.00~16.00 5.0~20.0 M6 1156 9
Part Number- P - L - B
Type DAQSA 4 - P2.01 - L6 - B5.5
Part Number- P - L - B
Type DADSC 5 - P3.98 - L6 - B3.0
QToleranceD or P m6 p6 g6 h7
1.00
~
3.00+0.008+0.002
+0.012+0.006
-0.002-0.008
0-0.010
3.01
~
6.00+0.012+0.004
+0.020+0.012
-0.004-0.012
0-0.012
6.01
~
10.00+0.015+0.006
+0.024+0.015
-0.005-0.014
0-0.015
10.01
~
16.00+0.018+0.007
+0.029+0.018
-0.006-0.017
0-0.018
* For D Tolerance g6, h7, no Insertion Guide is provided. (L1)
0.86.3
0.80.8
0.8l1 l2
L +0.3 B
P -0
.01
* Insertion Guide DR0.2
-0.01
Ø0.01 Ø0.01AA
CC
C0.5 M
D
-0.03
0+0.3
0
0
+0.3
-0.0
1
0+0.3
0
0
p
0.80.8
0.8
L B
P
R0.2 ◎A
C
D
• Press Fit • Tapped
QToleranceD or P m6 p6 g6 h7
1.00
~
3.00+0.008+0.002
+0.012+0.006
-0.002-0.008
0-0.010
3.01
~
6.00+0.012+0.004
+0.020+0.012
-0.004-0.012
0-0.012
6.01
~
10.00+0.015+0.006
+0.024+0.015
-0.005-0.014
0-0.015
10.01
~
16.00+0.018+0.007
+0.029+0.018
-0.006-0.017
0-0.018
* For D Tolerance g6, h7, no Insertion Guide is provided. (L1)
EDiamond Shape end has a relief.
0.86.3
R0.2
SR P/2* Insertion Guide D
0.8 0.8
0.8l1
l2
No Edge
L+0.3 B
P -0
.01
-0.01
Ø0.01
Ø0.01
AA
C
C0.5
M
D(W)
(60°)0
+0.3 0
+0.3 0
+0.3 0
0
-0.0
10
-0.03p
R0.20.8
0.8
L B
P
A◎A
D
0.86.3
R0.2
SR P/2* Insertion Guide D
0.8 0.8
0.8l1
l2
No Edge
L+0.3 B
P -0
.01
-0.01
Ø0.01
Ø0.01
AA
C
C0.5
M
D(W)
(60°)0
+0.3 0
+0.3 0
+0.3 0
0
-0.0
10
-0.03p
R0.20.8
0.8
L B
P
A◎A
D
0.86.3
R0.2
SR P/2* Insertion Guide D
0.8 0.8
0.8l1
l2
No Edge
L+0.3 B
P -0
.01
-0.01
Ø0.01
Ø0.01
AA
C
C0.5
M
D
(W)
(60°)0
+0.3 0
+0.3 0
+0.3 0
0
-0.0
10
-0.03p
R0.20.8
0.8
L B
P
A◎A
D
• Press Fit
• Tapped
(Diamond)(Round)
EFor products uncovered by e-Catalog Standard, see d P.131. EFor products uncovered by e-Catalog Standard, see d P.131.
MMaterial HHardness Pin ShapePress Fit Tapped
m6 p6 g6 h7 g6 h7
High Hardness Stainless Steel 35HRC~
Round AQSA AQSPA AQSGA AQSHA AQSTA AQSTHADiamond AQSD AQSPD AQSGD AQSHD AQSTD AQSTHD
EWhen the dia. exceeds Ø10, the center hardness may become 30HRC~.
MMaterial HHardnessPress Fit Tapped
m6 p6 g6 h7 g6 h7High Hardness Stainless Steel 35HRC~ ADSC ADSPC ADSGC ADSHC ADSTC ADSTHC
EWhen the dia. exceeds Ø10, the center hardness may become 30HRC~.
Alterations Air Vent C Chamfered Size Hex Socket Machining Wrench Hole P Dimension Tolerance
Code AC CN RAC LAC PM/PP/PG/PH
Spec.
Adds an air vent. Ordering Code AC
E�When D-3≤P, a relief groove is provided on B dim. part.
E�When B≤3.0, C≤0.5.
Changes C Chamfering at P dimension part to 0.5 or less. Ordering Code CN
EPress Fit D≥4ETapped D≥6XNot applicable to D dimension part.
Machines hex sockets. Ordering Code RAC
ES+3≤P-2
XCombination with LAC is not available.
Machines wrench holes.Ordering Code LAC
EApplicable when D≥8.EApplicable to Tapped Type only.
XCombination with RAC is not available.
Changes the P dim. tolerance.Ordering Code PM
E3 DaysE�Volume discount rate is
applicable.
DApplicable Dimension
Hex Hole Dimensions
B S e8 4.0~
3 210 4.0~12 5.0~16 7.0~ 4 2.5
Applicable Dimension Wrench Hole Dims.P B Q
~9.99 5.0~ 9.9 2 10.0~20.0 2.5
10.00~ 5.0~ 7.9 2 8.0~11.9 2.5 12.0~20.0 3.5
Ordering Code Tolerance
PM m6PP p6PG g6PH h7
D=P
D-0.15
(Round)
C0.5 or Less
B/2
Q
Se B/2
Q
Se
P
Part Number - P - L - B - (AC, CN, RAC ••• etc)ADSTC8 - P6.50 - L6 - B8.0 - LAC
Alterations Air Vent Wrench Hole P Dimension Tolerance
Code AC LAC PM/PP/PG/PH
Spec.
Adds an air vent. Ordering Code AC
E�When D-3≤P, a relief groove is provided on B dim. part.
Machines wrench holes. Ordering Code LAC
E�Diamond Shape Hole is drilled on the diamond head vertically but with arbitrary orientation of its diamond surfaces against those of the diamond head.
E�Applicable when D≥8.E�Applicable to Tapped Type only.
Changes the P dim. tolerance.Ordering Code PM
E3 DaysE�Volume discount
rate is applicable.
Applicable Dimension Wrench Hole Dimensions
P B Q
~9.99 5.0~ 9.9 2 10.0~20.0 2.5
10.00~ 5.0~ 7.9 2 8.0~11.9 2.5 12.0~20.0 3.5
Ordering Code Tolerance
PM m6PP p6PG g6PH h7
D-0.15
D=P(Round)
P
Q
B2
(30°)
Part Number - P - L - B - (AC, LAC ••• etc)AQSTA6 - P4.00 - L6 - B8 - PP