locking sleeves - macartney.com · besides our standard locking sleeves, we offer locking sleeves...
TRANSCRIPT
Underwater and harsh environment connectors
102 www.macartney.com 2nd edition
Locking sleeves
This
draw
ing
isth
epr
oper
tyof
Mac
Artn
eyA
/S,a
ndm
ustn
otbe
copi
edor
show
nto
ath
irdpe
rson
with
outp
erm
issi
on.
Sheets:
Reference:
Rev.:
Checked
Drawing no.:
DrawnDS/ISO 128
Surface:
Tol.:
Scale:
Matr.:
< 3.2
DS/ISO 2768-m
N/A
-
1
Lockingsleeve colour
SH 21-09-2015
Sheet no.:
1
DLSA-M/F
DLSB-M/F
DLSC-M/F
MCDLS-M/F
LS2000
DLSM1-M/F
LS2400
Red Blue Black Yellow Green White
Red Blue
Red Blue Black
GreenOrangeBlueRed
Black
Black
Black
Black
Besides our standard locking sleeves, we offer locking sleeves in a range of colours.
Hoses for pressure balanced oil filled connectors
MacArtney holds a stock of recommended hoses for Pressure Balanced Oil Filled (PBOF) connectors.
■ Tygon hose type C-120-A with 1/2” ID and 5/8” OD
■ Tygon hose type C-120-A with 5/8” ID and 13/16” OD
■ Tygon hose type C-120-A with 25.4 mm ID and 31.8 mm OD
Accessories
1032nd edition
Nuts and washers
This
draw
ing
isth
epr
oper
tyof
Mac
Artn
eyA
/S,a
ndm
ustn
otbe
copi
edor
show
nto
ath
irdpe
rson
with
outp
erm
issi
on.
Sheets:
Reference:
Rev.:
Checked
Drawing no.:
DrawnDS/ISO 128
Surface:
Tol.:
Scale:
Matr.:
< 3.2
DS/ISO 2768-m
N/A
1
Nut &Washer
JGR 13-08-2013
Sheet no.:
1
010351BrassBWP 7/8" washer01301180112010351BrassBW 3/4" washer01301111111010351BrassBWB 5/8" washer01301040110010351BrassBW 1/2" washer0130116019010351BrassBWA 7/16" washer0130102018010351BrassBW 3/8" washer01301060170.110351BrassBNP 7/8" nut0130117016010351BrassBN 3/4" nut0130111215010351BrassBNB 5/8" nut0130103014010351BrassBN 1/2" nut0130115013010351BrassBNA 7/16" nut0130101012010351BrassBN 3/8" nut0130105011Weight kgSupplierMaterialDescriptionMac No.QtyPos
n10.3n20
.6
n11.9n23
.4
n13.5
n27
n16.7
n33.3
n20.6
n38.1
n23.8
n44.5
Hex Flats 1-5/16"
Hex Flats 1-1/8"
Hex Flats 15/16"
Hex Flats 3/4"
Hex Flats 11/16"
Hex Flats 9/16"
16
20
22
27
32
37
7/16-20 UNF
- 2B
7/8-14 UN
F - 2B
5/8-18 UNF -
2B
3/8-24 UNF -
2B
3/4-16 UNF -
2B
1/2-20 UNF -
2B
1.6
1.6
3.6
3.6
2.38
2.4
6
6
8
10
11
13
Nuts and washers can be supplied in stainless steel AISI 316 or brass UNS-C36000.
Products for handling
General cleaning and removal of any accumulated sand or mud on a connector should be performed using spray based contact cleaner (isopropyl alcohol).
Loctite
Isopropyl
MacArtney offers Loctite 5910 and Loctite 243 for locking of connectors:
■ Always use Loctite 5910 to lock non-metallic (PEEK) connectors
■ For locking metallic connectors, the use of Loctite 243 is recommended
Molykote 44
MacArtney offers Molykote 44 Medium in two sizes (10 ml and 100 ml), connectors must be greased with Molykote 44 Medium before every mating.