English1. Make sure your headset is powered off.

2. Plug the USB receiver (a) into the USB receiver extension (b). Plug the extension into a USB port on your laptop. (You can also plug the USB receiver directly into a USB port on the laptop.)

3. Insert the end of a paper clip into the hole (a) on the back of the receiver to activate the reset button. The green wireless connection status light (b) on the receiver will begin blinking quickly.

4. Turn on the headset (a). Then simultaneously hold the Play/Pause and Next Track buttons (b) for 5 seconds. The green wireless connection status light (c) will begin blinking quickly.

5. When the wireless connection status light on both the headset and USB receiver turn solid green, pairing is successful.

Deutsch1. Make sure your headset is powered off.

2. Plug the USB receiver (a) into the USB receiver extension (b). Plug the extension into a USB port on your laptop. (You can also plug the USB receiver directly into a USB port on the laptop.)

3. Insert the end of a paper clip into the hole (a) on the back of the receiver to activate the reset button. The green wireless connection status light (b) on the receiver will begin blinking quickly.

4. Turn on the headset (a). Then simultaneously hold the Play/Pause and Next Track buttons (b) for 5 seconds. The green wireless connection status light (c) will begin blinking quickly.

5. When the wireless connection status light on both the headset and USB receiver turn solid green, pairing is successful.

Français1. Make sure your headset is powered off.

2. Plug the USB receiver (a) into the USB receiver extension (b). Plug the extension into a USB port on your laptop. (You can also plug the USB receiver directly into a USB port on the laptop.)

3. Insert the end of a paper clip into the hole (a) on the back of the receiver to activate the reset button. The green wireless connection status light (b) on the receiver will begin blinking quickly.

4. Turn on the headset (a). Then simultaneously hold the Play/Pause and Next Track buttons (b) for 5 seconds. The green wireless connection status light (c) will begin blinking quickly.

5. When the wireless connection status light on both the headset and USB receiver turn solid green, pairing is successful.

Italiano1. Make sure your headset is powered off.

2. Plug the USB receiver (a) into the USB receiver extension (b). Plug the extension into a USB port on your laptop. (You can also plug the USB receiver directly into a USB port on the laptop.)

3. Insert the end of a paper clip into the hole (a) on the back of the receiver to activate the reset button. The green wireless connection status light (b) on the receiver will begin blinking quickly.

4. Turn on the headset (a). Then simultaneously hold the Play/Pause and Next Track buttons (b) for 5 seconds. The green wireless connection status light (c) will begin blinking quickly.

5. When the wireless connection status light on both the headset and USB receiver turn solid green, pairing is successful.

Español1. Make sure your headset is powered off.

2. Plug the USB receiver (a) into the USB receiver extension (b). Plug the extension into a USB port on your laptop. (You can also plug the USB receiver directly into a USB port on the laptop.)

3. Insert the end of a paper clip into the hole (a) on the back of the receiver to activate the reset button. The green wireless connection status light (b) on the receiver will begin blinking quickly.

4. Turn on the headset (a). Then simultaneously hold the Play/Pause and Next Track buttons (b) for 5 seconds. The green wireless connection status light (c) will begin blinking quickly.

5. When the wireless connection status light on both the headset and USB receiver turn solid green, pairing is successful.

Português1. Make sure your headset is powered off.

2. Plug the USB receiver (a) into the USB receiver extension (b). Plug the extension into a USB port on your laptop. (You can also plug the USB receiver directly into a USB port on the laptop.)

3. Insert the end of a paper clip into the hole (a) on the back of the receiver to activate the reset button. The green wireless connection status light (b) on the receiver will begin blinking quickly.

4. Turn on the headset (a). Then simultaneously hold the Play/Pause and Next Track buttons (b) for 5 seconds. The green wireless connection status light (c) will begin blinking quickly.

5. When the wireless connection status light on both the headset and USB receiver turn solid green, pairing is successful.

Nederlands1. Make sure your headset is powered off.

2. Plug the USB receiver (a) into the USB receiver extension (b). Plug the extension into a USB port on your laptop. (You can also plug the USB receiver directly into a USB port on the laptop.)

3. Insert the end of a paper clip into the hole (a) on the back of the receiver to activate the reset button. The green wireless connection status light (b) on the receiver will begin blinking quickly.

4. Turn on the headset (a). Then simultaneously hold the Play/Pause and Next Track buttons (b) for 5 seconds. The green wireless connection status light (c) will begin blinking quickly.

5. When the wireless connection status light on both the headset and USB receiver turn solid green, pairing is successful.

Svenska1. Make sure your headset is powered off.

2. Plug the USB receiver (a) into the USB receiver extension (b). Plug the extension into a USB port on your laptop. (You can also plug the USB receiver directly into a USB port on the laptop.)

3. Insert the end of a paper clip into the hole (a) on the back of the receiver to activate the reset button. The green wireless connection status light (b) on the receiver will begin blinking quickly.

4. Turn on the headset (a). Then simultaneously hold the Play/Pause and Next Track buttons (b) for 5 seconds. The green wireless connection status light (c) will begin blinking quickly.

5. When the wireless connection status light on both the headset and USB receiver turn solid green, pairing is successful.

Dansk1. Make sure your headset is powered off.

2. Plug the USB receiver (a) into the USB receiver extension (b). Plug the extension into a USB port on your laptop. (You can also plug the USB receiver directly into a USB port on the laptop.)

3. Insert the end of a paper clip into the hole (a) on the back of the receiver to activate the reset button. The green wireless connection status light (b) on the receiver will begin blinking quickly.

4. Turn on the headset (a). Then simultaneously hold the Play/Pause and Next Track buttons (b) for 5 seconds. The green wireless connection status light (c) will begin blinking quickly.

5. When the wireless connection status light on both the headset and USB receiver turn solid green, pairing is successful.

Norsk1. Make sure your headset is powered off.

2. Plug the USB receiver (a) into the USB receiver extension (b). Plug the extension into a USB port on your laptop. (You can also plug the USB receiver directly into a USB port on the laptop.)

3. Insert the end of a paper clip into the hole (a) on the back of the receiver to activate the reset button. The green wireless connection status light (b) on the receiver will begin blinking quickly.

4. Turn on the headset (a). Then simultaneously hold the Play/Pause and Next Track buttons (b) for 5 seconds. The green wireless connection status light (c) will begin blinking quickly.

5. When the wireless connection status light on both the headset and USB receiver turn solid green, pairing is successful.

Suomi 1. Make sure your headset is powered off.

2. Plug the USB receiver (a) into the USB receiver extension (b). Plug the extension into a USB port on your laptop. (You can also plug the USB receiver directly into a USB port on the laptop.)

3. Insert the end of a paper clip into the hole (a) on the back of the receiver to activate the reset button. The green wireless connection status light (b) on the receiver will begin blinking quickly.

4. Turn on the headset (a). Then simultaneously hold the Play/Pause and Next Track buttons (b) for 5 seconds. The green wireless connection status light (c) will begin blinking quickly.

5. When the wireless connection status light on both the headset and USB receiver turn solid green, pairing is successful.

Ελληνικά1. Make sure your headset is powered off.

2. Plug the USB receiver (a) into the USB receiver extension (b). Plug the extension into a USB port on your laptop. (You can also plug the USB receiver directly into a USB port on the laptop.)

3. Insert the end of a paper clip into the hole (a) on the back of the receiver to activate the reset button. The green wireless connection status light (b) on the receiver will begin blinking quickly.

4. Turn on the headset (a). Then simultaneously hold the Play/Pause and Next Track buttons (b) for 5 seconds. The green wireless connection status light (c) will begin blinking quickly.

5. When the wireless connection status light on both the headset and USB receiver turn solid green, pairing is successful.

По-русски1. Make sure your headset is powered off.

2. Plug the USB receiver (a) into the USB receiver extension (b). Plug the extension into a USB port on your laptop. (You can also plug the USB receiver directly into a USB port on the laptop.)

3. Insert the end of a paper clip into the hole (a) on the back of the receiver to activate the reset button. The green wireless connection status light (b) on the receiver will begin blinking quickly.

4. Turn on the headset (a). Then simultaneously hold the Play/Pause and Next Track buttons (b) for 5 seconds. The green wireless connection status light (c) will begin blinking quickly.

5. When the wireless connection status light on both the headset and USB receiver turn solid green, pairing is successful.

Magyar1. Make sure your headset is powered off.

2. Plug the USB receiver (a) into the USB receiver extension (b). Plug the extension into a USB port on your laptop. (You can also plug the USB receiver directly into a USB port on the laptop.)

3. Insert the end of a paper clip into the hole (a) on the back of the receiver to activate the reset button. The green wireless connection status light (b) on the receiver will begin blinking quickly.

4. Turn on the headset (a). Then simultaneously hold the Play/Pause and Next Track buttons (b) for 5 seconds. The green wireless connection status light (c) will begin blinking quickly.

5. When the wireless connection status light on both the headset and USB receiver turn solid green, pairing is successful.

Česká verze1. Make sure your headset is powered off.

2. Plug the USB receiver (a) into the USB receiver extension (b). Plug the extension into a USB port on your laptop. (You can also plug the USB receiver directly into a USB port on the laptop.)

3. Insert the end of a paper clip into the hole (a) on the back of the receiver to activate the reset button. The green wireless connection status light (b) on the receiver will begin blinking quickly.

4. Turn on the headset (a). Then simultaneously hold the Play/Pause and Next Track buttons (b) for 5 seconds. The green wireless connection status light (c) will begin blinking quickly.

5. When the wireless connection status light on both the headset and USB receiver turn solid green, pairing is successful.

Po polsku1. Make sure your headset is powered off.

2. Plug the USB receiver (a) into the USB receiver extension (b). Plug the extension into a USB port on your laptop. (You can also plug the USB receiver directly into a USB port on the laptop.)

3. Insert the end of a paper clip into the hole (a) on the back of the receiver to activate the reset button. The green wireless connection status light (b) on the receiver will begin blinking quickly.

4. Turn on the headset (a). Then simultaneously hold the Play/Pause and Next Track buttons (b) for 5 seconds. The green wireless connection status light (c) will begin blinking quickly.

5. When the wireless connection status light on both the headset and USB receiver turn solid green, pairing is successful.

Eesti1. Make sure your headset is powered off.

2. Plug the USB receiver (a) into the USB receiver extension (b). Plug the extension into a USB port on your laptop. (You can also plug the USB receiver directly into a USB port on the laptop.)

3. Insert the end of a paper clip into the hole (a) on the back of the receiver to activate the reset button. The green wireless connection status light (b) on the receiver will begin blinking quickly.

4. Turn on the headset (a). Then simultaneously hold the Play/Pause and Next Track buttons (b) for 5 seconds. The green wireless connection status light (c) will begin blinking quickly.

5. When the wireless connection status light on both the headset and USB receiver turn solid green, pairing is successful.

Latviski1. Make sure your headset is powered off.

2. Plug the USB receiver (a) into the USB receiver extension (b). Plug the extension into a USB port on your laptop. (You can also plug the USB receiver directly into a USB port on the laptop.)

3. Insert the end of a paper clip into the hole (a) on the back of the receiver to activate the reset button. The green wireless connection status light (b) on the receiver will begin blinking quickly.

4. Turn on the headset (a). Then simultaneously hold the Play/Pause and Next Track buttons (b) for 5 seconds. The green wireless connection status light (c) will begin blinking quickly.

5. When the wireless connection status light on both the headset and USB receiver turn solid green, pairing is successful.

© 2010 Logitech. All rights reserved. Logitech, the Logitech logo, and other Logitech marks are owned by Logitech and may be registered. All other trademarks are the property of their respective owners. Logitech assumes no responsibility for any errors that may appear in this manual. Information contained herein is subject to change without notice.

620-003069.002

www.logitech.com/support

Lietuvių1. Make sure your headset is powered off.

2. Plug the USB receiver (a) into the USB receiver extension (b). Plug the extension into a USB port on your laptop. (You can also plug the USB receiver directly into a USB port on the laptop.)

3. Insert the end of a paper clip into the hole (a) on the back of the receiver to activate the reset button. The green wireless connection status light (b) on the receiver will begin blinking quickly.

4. Turn on the headset (a). Then simultaneously hold the Play/Pause and Next Track buttons (b) for 5 seconds. The green wireless connection status light (c) will begin blinking quickly.

5. When the wireless connection status light on both the headset and USB receiver turn solid green, pairing is successful.

Hrvatski1. Make sure your headset is powered off.

2. Plug the USB receiver (a) into the USB receiver extension (b). Plug the extension into a USB port on your laptop. (You can also plug the USB receiver directly into a USB port on the laptop.)

3. Insert the end of a paper clip into the hole (a) on the back of the receiver to activate the reset button. The green wireless connection status light (b) on the receiver will begin blinking quickly.

4. Turn on the headset (a). Then simultaneously hold the Play/Pause and Next Track buttons (b) for 5 seconds. The green wireless connection status light (c) will begin blinking quickly.

5. When the wireless connection status light on both the headset and USB receiver turn solid green, pairing is successful.

Srpski1. Make sure your headset is powered off.

2. Plug the USB receiver (a) into the USB receiver extension (b). Plug the extension into a USB port on your laptop. (You can also plug the USB receiver directly into a USB port on the laptop.)

3. Insert the end of a paper clip into the hole (a) on the back of the receiver to activate the reset button. The green wireless connection status light (b) on the receiver will begin blinking quickly.

4. Turn on the headset (a). Then simultaneously hold the Play/Pause and Next Track buttons (b) for 5 seconds. The green wireless connection status light (c) will begin blinking quickly.

5. When the wireless connection status light on both the headset and USB receiver turn solid green, pairing is successful.

Slovenščina1. Make sure your headset is powered off.

2. Plug the USB receiver (a) into the USB receiver extension (b). Plug the extension into a USB port on your laptop. (You can also plug the USB receiver directly into a USB port on the laptop.)

3. Insert the end of a paper clip into the hole (a) on the back of the receiver to activate the reset button. The green wireless connection status light (b) on the receiver will begin blinking quickly.

4. Turn on the headset (a). Then simultaneously hold the Play/Pause and Next Track buttons (b) for 5 seconds. The green wireless connection status light (c) will begin blinking quickly.

5. When the wireless connection status light on both the headset and USB receiver turn solid green, pairing is successful.

Slovenčina1. Make sure your headset is powered off.

2. Plug the USB receiver (a) into the USB receiver extension (b). Plug the extension into a USB port on your laptop. (You can also plug the USB receiver directly into a USB port on the laptop.)

3. Insert the end of a paper clip into the hole (a) on the back of the receiver to activate the reset button. The green wireless connection status light (b) on the receiver will begin blinking quickly.

4. Turn on the headset (a). Then simultaneously hold the Play/Pause and Next Track buttons (b) for 5 seconds. The green wireless connection status light (c) will begin blinking quickly.

5. When the wireless connection status light on both the headset and USB receiver turn solid green, pairing is successful.

Română1. Make sure your headset is powered off.

2. Plug the USB receiver (a) into the USB receiver extension (b). Plug the extension into a USB port on your laptop. (You can also plug the USB receiver directly into a USB port on the laptop.)

3. Insert the end of a paper clip into the hole (a) on the back of the receiver to activate the reset button. The green wireless connection status light (b) on the receiver will begin blinking quickly.

4. Turn on the headset (a). Then simultaneously hold the Play/Pause and Next Track buttons (b) for 5 seconds. The green wireless connection status light (c) will begin blinking quickly.

5. When the wireless connection status light on both the headset and USB receiver turn solid green, pairing is successful.

Български1. Make sure your headset is powered off.

2. Plug the USB receiver (a) into the USB receiver extension (b). Plug the extension into a USB port on your laptop. (You can also plug the USB receiver directly into a USB port on the laptop.)

3. Insert the end of a paper clip into the hole (a) on the back of the receiver to activate the reset button. The green wireless connection status light (b) on the receiver will begin blinking quickly.

4. Turn on the headset (a). Then simultaneously hold the Play/Pause and Next Track buttons (b) for 5 seconds. The green wireless connection status light (c) will begin blinking quickly.

5. When the wireless connection status light on both the headset and USB receiver turn solid green, pairing is successful.

Українська1. Make sure your headset is powered off.

2. Plug the USB receiver (a) into the USB receiver extension (b). Plug the extension into a USB port on your laptop. (You can also plug the USB receiver directly into a USB port on the laptop.)

3. Insert the end of a paper clip into the hole (a) on the back of the receiver to activate the reset button. The green wireless connection status light (b) on the receiver will begin blinking quickly.

4. Turn on the headset (a). Then simultaneously hold the Play/Pause and Next Track buttons (b) for 5 seconds. The green wireless connection status light (c) will begin blinking quickly.

5. When the wireless connection status light on both the headset and USB receiver turn solid green, pairing is successful.

Türkçe1. Make sure your headset is powered off.

2. Plug the USB receiver (a) into the USB receiver extension (b). Plug the extension into a USB port on your laptop. (You can also plug the USB receiver directly into a USB port on the laptop.)

3. Insert the end of a paper clip into the hole (a) on the back of the receiver to activate the reset button. The green wireless connection status light (b) on the receiver will begin blinking quickly.

4. Turn on the headset (a). Then simultaneously hold the Play/Pause and Next Track buttons (b) for 5 seconds. The green wireless connection status light (c) will begin blinking quickly.

5. When the wireless connection status light on both the headset and USB receiver turn solid green, pairing is successful.

Arabic1. Make sure your headset is powered off.

2. Plug the USB receiver (a) into the USB receiver extension (b). Plug the extension into a USB port on your laptop. (You can also plug the USB receiver directly into a USB port on the laptop.)

3. Insert the end of a paper clip into the hole (a) on the back of the receiver to activate the reset button. The green wireless connection status light (b) on the receiver will begin blinking quickly.

4. Turn on the headset (a). Then simultaneously hold the Play/Pause and Next Track buttons (b) for 5 seconds. The green wireless connection status light (c) will begin blinking quickly.

5. When the wireless connection status light on both the headset and USB receiver turn solid green, pairing is successful.

Argentina

Česká republika

Россия

Ελληνική Δημοκρατία