loiva mj-3400 a4 flyer 01 - uzman grup mj-3400.pdf · the machine is used for making runstitch of...

2
[email protected] | www.lovia.kr DESIGNED FOR SMOOTH & CONSISTENCY IN OUTSTANDING PRODUCTIVITY WITH BEST EFFICIENCY MJ-3400 INDUSTRIAL SEWING MACHINE SINGLE NEEDLE LOCK STITCH MACHINE FOR MAKING COLLAR CUFF ETC. AUTOJIG MACHINE INVENTED IN ADVANCED DELIVERING THE EXCELLENCE

Upload: others

Post on 30-Aug-2020

7 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: LOIVA MJ-3400 A4 Flyer 01 - Uzman Grup MJ-3400.pdf · The machine is used for making runstitch of collar, flap, shoulder tab, cuff, collar band joining, fly piece making, lapel making

[email protected] | www.lovia.kr

DESIGNED FOR

SMOOTH &CONSISTENCYIN OUTSTANDING PRODUCTIVITY WITH BEST EFFICIENCY

MJ-3400INDUSTRIAL SEWING MACHINE SINGLE NEEDLE LOCK STITCH MACHINE FOR MAKING COLLAR CUFF ETC. AUTOJIG MACHINE

INVENTED IN

ADVANCEDDELIVERING THE EXCELLENCE

Page 2: LOIVA MJ-3400 A4 Flyer 01 - Uzman Grup MJ-3400.pdf · The machine is used for making runstitch of collar, flap, shoulder tab, cuff, collar band joining, fly piece making, lapel making

The machine is used for making runstitch of

collar, flap, shoulder tab, cuff, collar band

joining, fly piece making, lapel making etc. It

gives the higher productivity as well as the

consistency in the quality. By using this de-

skill the above operation.

SPECIFICATIONS

MJ-3400

Sharp Corner Round Corner

Dimension 1200 x 780 x 1770 m/m

Weight 145 kg

Air Consumption 12 L/Min or 0.43 CFM2 Air Pressure 4-6 kg/cm with Automatic

water separator system

Power / Power Consumption Free Voltage 110V-240V / 1000 W

Cycle Free Cycle 50/60 Hz

Motor Servo Motor 550 Watts/220V

Voltage Control System In-Built SMPS

Speed 3000 SPM

Needle Plate Size Seam Allowance

6 mm (Special Order) Any size (Special order request)

11 mm (Standard) 3/16"

13 mm 1/4"

CORNER & ROUNDING TOGETHER POSSIBLE IN SINGLE MODE

INDIA MARKET PRODUCTS MANUFACTURED BY LOIVA KOREA WILL BE SOLD UNDER TRADEMARK SAKHO

• Anti static tables with bearing ensures • 3 (Marking, Stitching and Cutting) smooth movement of jigsOperations are done in single shot

• Intelligent add sensors ensures perfect • No sensor stickers requiredstitches in the turns

• Combinations of different patterns and • Microprocessor controlled systemshapes possible• Inbuilt stabilised SMPS protects from • User friendly machine with LCD display

voltage hazards• Direct Drive sewing head is used

• Fabric and thread breakage sensors • Independent knife driving system for edge

(optional)cutting

• No limitations in the size of the jigs.• 3 sizes of cutting margin available

• 3 operating modes (A,B&C)(1/4”, 3/16” and ready cut)

• Jig movement by stepping motors ensures even stitches throughout the seam

FEATURESAPPLICATION

1

4

6

4

3

4

5

2

1

4

5

2

WORKS WITHOUT SENSOR

STICKERS

3

6

7

7 7

INDUSTRIAL SEWING MACHINE SINGLE NEEDLE LOCK STITCH MACHINE FOR MAKING COLLAR CUFF ETC. AUTOJIG MACHINE

Des

ign

by: dreams.thoughts.apply@

gmail.com

Our representative:LOIVA3FL, 768-12, Ohjung-Dong, Ohjung-Gu, Bucheon-City, Kyounggi-Do, KoreaPh: +82 32 677 3321/ 3322 Fax: [email protected] | www.lovia.kr

DELIVERING THE EXCELLENCE