longsweep and triplestep swivel catalog 2012
DESCRIPTION
ffTRANSCRIPT
-
Flowline Products and ServicesWorld Proven Chiksan and Weco Equipment
http://www.fmctechnologies.com
-
Swivel JointsOriginal Chiksan
Steamlined bore minimizes flow restrictionsSmooth, round bore design minimizes turbulence and pressure drop, Longsweep and TripleStep swivel joints have extra-long radius elbows that optimize flow characteristics and extend life in the ball race areas when handling abrasives at extremely high pressures.
Bearings key to rotation, strengthTo assure long, dependable service, Chiksan dual and tri-race ball bearing swivels are designed to meet or exceed load capacities and service conditions. All ball races are either flame hardened, carburized and hardened, or have snap-in stainless steel ball races.
Proven packing designIndustry leading packing design integrates an anti-extrusion ring that serves as a retainer and bearing to reduce friction between the resilient packing material and the packing chamber as the joint is rotated.
Field repairableIf packing, bearings, or ball plugs should need replacing, easy-to-use field repair kits are available.
Chiksan swivel joints deliver significantly longer life, superior performance, and reduced maintenance. Designed for standards and sour gas services, these world proven fittings come in 38 to 12-inch sizes and can handle pressures from vacuum to 20,000 psi. Many different Chiksan assembly configurations are available. These styles can be combined in an unlimited variety of ways to suit practically any installation. Available end connections are threaded, integral Weco wing union, beveled for welding, or flanged. Like all pressure containing products, Chiksan swivels require special handling (see inside back cover for Warnings and Cautions).
16FMC Technologies, Inc.
-
Figu
re N
umbe
rC
olor
Cod
ing
Col
d W
orki
ng
Pres
sure
psi (
bar)
Mat
eria
lEn
d C
onne
ctio
ns
Nom
inal
Siz
es, i
n.N
otes
3 8
1 2
3 4
11
1 4
1 1
22
34
Low
-Pre
ssur
eSw
ivel
Join
ts
Dar
k G
reen
175
(12)
Duc
tile
Iron
Flan
ged
1,2,
3Bl
ue28
5 (2
0)C
arbo
n St
eel
Flan
ged
1,
3,4
Dar
k G
reen
600
(41)
Duc
tile
Iron
NPT
2,
3
Blue
1,00
0 (6
9)C
arbo
n St
eel
NPT
3
Beve
led
for
wel
ding
3,
4
Hig
h-Pr
essu
re
Swiv
el Jo
ints
Silv
er6,
000
(414
)C
arbo
n St
eel
Fem
ale
line
pipe
thre
ads
3,
6,8
Extr
a H
igh-
Pres
sure
Swiv
el Jo
ints
Blac
k10
,000
(690
)C
arbo
n St
eel
Fem
ale
line
pipe
thre
ads
3,
6
Long
swee
p S
wiv
el
Join
ts
Oliv
e G
reen
(Sou
r G
as)
7,50
0 (5
17)
Allo
y St
eel
Wec
o fig
ure
1002
uni
on
5
Oliv
e G
reen
(Sou
r G
as)
10,0
00 (6
90)
Allo
y St
eel
Wec
o fig
ure
1502
uni
on
5
Blac
k10
,000
(690
)A
lloy
Stee
l
Fem
ale
line
pipe
thre
ads
3,
6,7
Wec
o fig
ure
1002
uni
on3
Oliv
e G
reen
(Sou
r G
as)
15,0
00 (1
034)
Allo
y St
eel
Wec
o fig
ure
2202
uni
on
6
Red
15,0
00 (1
034)
Allo
y St
eel
Wec
o fig
ure
1502
uni
on
3
Trip
leSt
epSw
ivel
Join
ts
Blac
k10
,000
(690
)A
lloy
Stee
lW
eco
figur
e10
02 u
nion
3
Red
15,0
00 (1
034)
Allo
y St
eel
Wec
o fig
ure
1502
uni
on
3
Brow
n7,
500
(517
)A
lloy
Stee
lFe
mal
e lin
epi
pe th
read
s3,
6
Ligh
t Blu
e20
,000
(137
9)A
lloy
Stee
lW
eco
figur
e20
02 u
nion
3
Not
es
All
body
mat
eria
ls m
eet A
STM
or A
ISI s
tand
ards
.6.
Pow
er m
ake-
up m
ust b
e us
ed fo
r lin
e pi
pe th
read
ed c
onne
ctio
ns to
ach
ieve
rate
d co
ld w
orki
ng p
ress
ure.
C
onsu
lt fa
ctor
y fo
r sp
ecia
l siz
es, s
tyle
s, e
nd c
onne
ctio
ns, o
r pa
ckin
g un
its.
7.3-
inch
siz
e ra
ted
at 1
0,00
0 ps
i cou
ld w
orki
ng p
ress
ure
with
inte
gral
Wec
o 10
02 u
nion
end
s on
ly.
8.5-
inch
siz
e av
aila
ble
with
thre
aded
or
beve
led
ends
; lim
ited
to 3
,000
psi
cou
ld o
wrk
ing
pres
sure
.1.
Flan
ged
ends
face
d an
d dr
illed
to C
lass
150
flan
ge s
peci
ficat
ions
, unl
ess
othe
rwis
e sp
ecifi
ed.
Sour
gas
ser
vice
FMC
Tec
hnol
ogie
s m
anuf
actu
res
Chi
ksan
sou
r ga
s sw
ivel
join
ts in
acc
orda
nce
iwth
the
Nat
iona
l Ass
ocia
tion
of C
orro
sion
Eng
inee
rs (N
AC
E) S
tand
ard
MR-
01-7
5 an
d th
e A
mer
ican
Pet
role
um In
stitu
tes
(API
) Sta
ndar
d RP
-14
-E.
Thes
e sw
ivel
join
ts a
re s
peci
ally
hea
t-tre
ated
and
insp
ecte
d fo
r co
ntro
lled
hard
ness
. Be
caus
e th
e sp
ecia
lly
heat
trea
ted
stee
l req
uire
d fo
r so
ur g
as s
ervi
ce d
oes
not p
rovi
de a
str
ong
enou
gh b
eari
ng s
urfa
ce, C
hiks
an
sour
gas
sw
ivel
join
ts u
se p
aten
ted
snap
-in b
all r
aces
to a
ssur
e ex
tra
stre
ngth
and
hig
h lo
ad-b
eari
ng c
apac
ity.
Fluo
roel
asto
mer
or
HN
BR p
acki
ng is
use
d to
isol
ate
the
race
s fr
om th
e lin
e flu
id.
2.N
ot a
vaila
ble
in S
tyle
s 80
, 10,
or
othe
r st
yles
req
uiri
ng m
ore
than
two
swiv
el c
onne
ctio
ns.
3.3/
8 - t
o 4-
inch
siz
es fu
rnis
hed
with
nitr
ile p
acki
ng a
nd b
rass
or
stai
nles
s st
eel a
nti-e
xtru
sion
rin
g.4.
6 - t
o 12
-inch
siz
es fu
rnis
hed
with
nitr
ile p
acki
ng a
nd s
tain
less
ste
el a
nti-e
xtru
sion
rin
g.5.
Furn
ishe
d w
ith F
luor
oele
stom
er o
r H
NBR
pac
king
and
sta
inle
ss s
teel
ant
i-ext
rusi
on r
ing.
FM
C
Tech
nolo
gies
doe
s no
t war
rant
the
perf
orm
ance
of a
ny e
last
omer
sea
l for
sou
r ga
s se
rvic
e.
17FMC Technologies, Inc.
-
Advanced material selectionThe TripleStep swivel joint is manufactured from forged alloy steel with a closely controlled, proprietary chemical composition and heat treatment to ensure superior toughness, ductility, case depth, case hardness, and core strength.
TripleStep Swivel Joints
Exclusive design delivers longer life, lower costTripleStep swivel joints deliver the highest bending and axial load capacities in the industry. They also eliminate rejections from excessive wear in the ball race areas as well as swivel seizures due to corrosion and brinnelling of the ball races.
Unmatched erosion allowancePatented three step design coupled and bearing race geometry adds significant wall thickness under the male races and bearing load capacity without increasing swivel joint size or weight.
Instream packing for long seal lifeWorld proven instream packing technology provides unsurpassed sealability and reliability in the harshest oilfield conditions. An integral anti-extrusion ring serves as a retainer and bearing to reduce friction between the resilient packing material and the packing chamber as the joint is rotated.
Eliminates routine maintenanceAn improved environmental seal reduces the potential for corrosion in the ball race area. The integrity of the seal and the use of a high-performance grease during initial assembly virtually eliminates the need for periodic greasing.
Competitive Hype VS. Proof PositiveDesigned especially for abrasive, high pressure well servicing applications, TripleStep swivel joints have been proven against competitive swivels in customer-witnessed flow loop tests and field applications. The patented three step ball race design provides significantly greater erosion allowance without increasing swivel joint size or weight. The result: TripleStep swivel joints deliver increased life, superior performance, and reduced maintenance...lasting 1.7 to 5 times longer than competitive swivels.
Thicker Where it CountsCompetitive swivels wear out first in the ball races, meaning they must be disassembled for inspection. TripleStep swivels wear in the elbows, meaning they can be inspected and returned to service without disassembly. The TripleStep design places more material under the male ball race - a location that computational flow dynamics analysis and field testing shows to be a high erosion area.
59.0
165.4
32.3
159.2
50.7
247.5
92.5
240.0
Hou
rs to
Min
imum
Wea
r A
llow
ance
Competitive Swivels FMC Swivels
Accelerated Wear Test(40ft/sec. with 6 ppa 20/40northern sand)
-
Recommended serviceLong-radius elbows designed especially for high-pressure abrasive applications such as fracturing, choke-and-kill lines, cementing and circulating hoses, acidizing, and test lines
Low-Pressure Swivel Joints175 psi to 1,000 psi cold working pressure; 3/4 to 12-inch sizes.
Recommended serviceTransfer lines, temporary flow lines, discharge lines, auxiliary flow lines, water lines, and other general-service oilfield applications.
HP (High-Pressure) Swivel Joints6,000 psi cold working pressure; 3/8 to 4-inch sizes
Recommended serviceHydraulic control lines, mud lines, rotary line connections, BOP lines, test lines, offshore wellhead connections, cementing and circulating hoses, and choke-and-kill lines
See specifications tables (pg. 58 - 64) for sizes, dimensions, weights, materials, and part numbers.
TSi (TripleStep) Swivel Joints 6,000 psi cold working pressure; 3 inch size. 10,000 psi cold working pressure; 3 and 4-inch sizes. 15,000 psi cold working pressure; 3 and 4 inch. 20,000 psi cold working pressure; 3 inch size.
For Longsweep swivels and sizes or pressures not shown, consult factory
19FMC Technologies, Inc.
-
Controlled hardnessSwivel components are specially heat-treated and 100% tested for controlled hardness.
Positive identificationChiksan swivels for sour gas service are stamped Sour Gas and painted with an olive green, zinc-chromate primer to ensure quick, positive identification.
Leak detectionA leak detection port between the packing and O-ring seal signals the need for packing replacement.
Proven packing designElastomeric packing with stainless steel anti-extrusion ring and secondary O-ring seal are used to isolate the races and bearings from line fluid.
Snap-in ball racesSnap-in ball races provide hard bearing surface to deliver extra strength and high load-bearing capacity when handling sour gas.
Sour Gas ServiceFMC Technologies manufactures Chiksan sour gas swivel joints in accordance with the National Association of Corrosion Engineers (NACE) Standard MR-01-75 and the American Petroleum Institutes (API) Standard RP-14-E. These swivel joints are specially heat-treated and inspected for controlled hardness. Because the specially heat-treated steel required for sour gas does not provide a hard enough bearing surface, Chiksan sour gas swivel joints use snap-in ball races for extra strength and high load-bearing capacity. Sour gas swivel joints come standard with integral Weco wing union end connections. They also have a leak-detection port between the packing and the O-ring seal. If leakage past the packing should occur, it is forced through the port, signaling the need for packing replacement. For positive identification, all Chiksan sour gas swivel joints are stamped Sour Gas or NACE MR-01-75 using low-stress dot stamping and painted with an olive green, zinc-chromate primer tthat is unique to sour gas equipment.
Chiksan Sour Gas Swivel Joint
Chiksan Swivel Joints for Sour Gas Service:High-Pressure Swivel Joints6,000 psi cold working pressure, 2 and 3-inch sizes; Weco Figure 602 wing union end connections
Longsweep Swivel Joints7,500 psi cold working pressure, 3-inch size; Weco Figure 1002 wing union end connections
10,000 psi could working pressure, 1,2,3 and 4-inch sizes; Weco Figure 1502 wing union end connections
15,000 psi cold working pressure, 2 and 3-inch sizes; Weco Figure 2202 wing union end connections
-
Chiksan Swivel Joint Styles WarningChiksan swivel joints are available from stock in nine basic styles or configurations. These styles permit 360-degree rotation and movement in one, two, or three planes. They can be combined in an unlimited variety of ways to suit practically any installation. All Chiksan swivel joints are assembled using two or more standard pieces.
Although Chiksan swivel joints can be rotated while under fluid pressure, they are not recommended for service requiring continuous rotary motion. See inside back cover for additional Warnings and Cautions.
Style 20 Style 30 Style 40
Style 70Style 60Style 50
Style 80 Style 10 Style 100
See specifications tables (pg. 58 - 64) for sizes, dimensions, weights, materials, and part numbers.
21FMC Technologies, Inc.
-
Chiksan Swivel Joint Specifications
TripleStep and Longsweep Swivel Joints
Size/
Mod
elBo
re in
. (m
m)
CWP
psi
(bar)
End
Con-
nec-
tions
Style
20St
yle 30
Style
40St
yle 50
Style
60
Part
No.
AW
t lb kgPa
rt No
.A
BW
t lb kgPa
rtNo
.A
BW
t lb kgP/
NP/
N-LT
AB
CW
t lb kgPa
rtNo
.A
BW
t lb kg1
LS10
.88 (
22)
10,00
0(6
90)
Thre
aded
CF61
0153
761
0153
7-LT
4.38
111
7.14
181
8 3.6N/
A31
3954
631
3954
6-LT
4.38
111
7.28
185
7.02
178
16 7.2CF
1 LS
15.8
8 (22
)15
,000
(1034
)
1502
(M
xF)
CF32
5929
132
5929
1-LT
4.06
103
8.4 213
12 5.5N/
A31
3954
731
3954
7-LT
4.06
103
7.35
187
8.4 213
22 10.2
CF
1502
(M
xM)
CFN/
AN/
AN/
ACF
1.5 L
S10
1.3 (3
3)10
,000
(690
)Th
read
edCF
CFN/
A31
3977
731
3977
9-LT
7.96
9.37
7.96
26CF
1.5 L
S15
1.3 (3
3)15
,000
(1034
)
1502
(M
xF)
CFCF
N/A
3139
778
3139
778-
LT5 12
79.4 23
910
.125
734 15
.5CF
1502
(M
xM)
CFN/
AN/
AN/
ACF
2 LS
101.8
8 (48
)10
,000
(690
)Th
read
ed31
3988
B7.2
1431
3988
96.3
89.0
121
3139
890
3139
890-
LT6.3
616
210
.73 273
30 13.6
3139
904
3139
904-
LT6.4 16
310
.74 273
9 229
37 16.8
CF
2 LS
151.8
8 (48
)15
,000
(1034
)
1502
(M
xF)
3144
126
11.15 283
37 16.8
3144
125
5.510
.9136
N/A
3139
475
3139
475-
LT5.5 14
010
.74 273
10.92 277
56 25.5
3144
630
3144
630-
LT11 27
911 27
948 22
1502
(M
xM)
CFN/
AN/
A32
6720
332
6720
3-LT
7.28
185
10.74 273
10.92 277
60 27.2
6101
559
6101
559-
LT11 27
911 27
962 28
.115
02
(FxF)
CFN/
AN/
AP5
0988
85.5 14
010
.74 273
8.79
223
42 18.9
P504
952
P504
952-
LT8.7
922
38.7
922
337 16
.9
2 LS
201.8
8 (48
)20
,000
1379
)
2002
(M
xF)
CFCF
N/A
3144
569
3144
569-
LT5.1
213
010
.927
712
.42 315
62 28.3
CF
2002
(M
xM)
P524
579
P524
579-
LTCF
N/A
N/A
CF
3 TS
i152.7
5 (70
)7,5
00(5
17)
Thre
aded
CFN/
AN/
AN/
ACF
3 TS
i152.7
5 (70
)15
,000
(1034
)
1502
(M
xF)
P505
417
P505
417-
LT12
.632
052 23
.8P5
0541
6P5
0541
6-LT
7.9 201
14.4
366
68 31N/
AP5
0532
7P5
0532
7-LT
7.9 201
16.4
417
14.4
366
107
48.4
P505
420
P505
420-
LT14
.536
814
.536
891 41
.315
02
(MxM
)CF
N/A
N/A
N/A
CF
3 TS
i203 (
76)
20,00
0(13
79)
2002
(M
xF)
CFCF
N/A
P527
340
P527
340-
LT9.6
924
621
.253
820
.451
828
813
1CF
4 TS
i103.8
8 (98
)10
,000
(690
)
1002
(M
xF)
P516
092
P516
092-
LT14
.535
974 33
.6P5
1748
7P5
1748
7-LT
8.3 211
16.2
411
99 45N/
AP5
1609
1P5
1609
1-LT
8.3 211
18.1
460
16.2
411
161
73.3
CF
1002
(M
xM)
CFN/
AN/
AN/
ACF
4 TS
i153.5
(89)
15,00
0(6
90)
1502
(M
xF)
CFCF
N/A
P527
331
P527
331-
LT9.6
924
621
.253
820
.451
825
511
6CF
A
BA
B
CA
B
A
BA
A
A
B
A
B
C
A
B
A
B
FMC Technologies, Inc. Flowline Products & Services
Chi
ksan
S
wiv
el Jo
int
Spec
ifica
tions
58
-
Size/
Mod
elBo
re in
. (m
m)
CWP
psi
(bar)
End
Conn
ec-
tions
Style
70St
yle 80
Style
10St
yle 10
0
Part
No.
AB
CD
Wt lb kg
Part
No.
AB
CD
Wt lb kg
P/N
P/N-
LTA
BC
Wt lb kg
Part
No.
AB
CD
Wt lb kg
1 LS
10.88
(22)
10,00
0(6
90)
Thre
aded
N/A
CF31
4145
431
4145
4-LT
7.14
181
7.46
189
7.14
181
24 10.9
N/A
1 LS
15.88
(22)
15,00
0(10
34)1
502 (
MxF
)N/
AP5
1613
5P5
1613
5-LT
8.4 181
7.47
190
7.47
190
4.06
103
28 12.9
3139
550
3139
550-
LT8.4 21
37.4 18
88.4 21
327 12
.1CF
1502
(MxM
)N/
AN/
A31
4588
631
4588
6-LT
8.4 213
7.4 188
8.4 213
27 12.1
CF
1.5 L
S10
1.3 (3
3)10
,000
(690
)Th
read
edN/
ACF
P501
542
P501
542-
LT7.9
620
29.3
723
87.9
620
226 11
.8N/
A
1.5 L
S15
1.3 (3
3)15
,000
(1034
)150
2 (M
xF)
N/A
P502
504
P502
504-
LT10
.12 257
9.37
238
9.37
238
5 127
47 21.1
3139
781
3139
781-
LT10
.12 257
9.37
238
10.12 257
44 20CF
1502
(MxM
)N/
AN/
A31
3978
031
3978
0-LT
10.12 257
9.37
238
10.12 257
52 23.5
CF
2 LS
101.8
8 (48
)10,0
00(6
90)
Thre
aded
3139
891
3139
891-
LT6.3
816
210
.73 273
10.73 273
6.38
162
47 21.2
3139
892
3139
892-
LT8.9
122
610
.73 273
10.73 273
6.38
162
56 25.6
3139
476
3139
476-
LT9 22
910
.727
29 22
945 20
.5N/
A
2 LS
151.8
8 (48
)15,0
00(10
34)1
502 (
MxF
)P5
0548
2P5
0548
2-LT
5.5 140
10.73 273
10.73 273
5.5 140
60 27.2
3139
901
3139
901-
LT10
.927
710
.73 256
10.73 256
5.5 140
80 36.5
3139
905
3139
905-
LT10
.927
710
.727
210
.927
761 27
.731
4409
431
4409
4-LT
10.97 279
10.73 273
10.73 273
10.91 277
82 37.5
1502
(MxM
)N/
AP5
2769
7P5
2769
7-LT
3139
477
3139
477-
LT10
.927
710
.727
210
.927
770 31
.831
3990
331
3990
3-LT
10.97 279
10.73 273
10.73 273
10.91 277
90 40.7
1502
(FxF
)N/
AN/
AP5
1896
0P5
1896
0-LT
8.8 224
10.7
272
10.9
277
50 22.7
CF
2 LS
201.8
8 (48
)20,0
0013
79)
2002
(MxF
)N/
ACF
3144
570
3144
570-
LT10
.927
710
.81 275
12.42 315
78 35.2
CF
2002
(MxM
)N/
AN/
A31
4457
131
4457
1-LT
12.51 318
10.91 277
12.52 318
87 39.5
3144
572
3144
572-
LT12
.531
810
.927
710
.927
712
.531
810
849
.13
TSi15
2.75 (
70)
7,500
(517
)Th
read
edN/
AN/
AP5
2421
8P5
2421
8-LT
12.88 327
16.42 417
12.88 327
102
46.4
CF
3 TS
i152.7
5 (70
)15
,000
(1034
)150
2 (M
xF)
N/A
P505
409
P505
409-
LT14
.436
616
.441
716
.441
77.9 20
114
565
.9P5
0532
5P5
0532
5-LT
14.5
368
16.4
417
14.4
366
129
58.7
P505
410
P505
410-
LT14
.436
616
.441
716
.441
714
.637
116
876
.1
1502
(MxM
)N/
AN/
AP5
0532
6P5
0532
6-LT
14.4
366
16.4
417
14.4
366
143
64.8
P505
411
P505
411-
LT14
.436
616
.441
716
.441
714
.637
118
182
.23
TSi20
3 (76
)20
,000
(1379
)200
2 (M
xF)
N/A
CFP5
2739
920
.451
821
.253
820
.451
836
016
4CF
4 TS
i103.8
8 (98
)10,0
00(6
90)
1002
(MxF
)N/
ACF
P516
094
P516
094-
LT16
.140
918
.146
016
.241
119
889
.8CF
1002
(MxM
)N/
AN/
AP5
1609
3P5
1609
3-LT
15.9
404
18.1
460
16.2
411
209 95
CF
4 XH
TL3.5
(89)
10,00
0(6
90)
1502
(MxF
)N/
ACF
3130
501
20.4
518
21.2
538
20.4
518
338
154
CF
Chiksan Swivel Joint Specifications
TripleStep and Longsweep Swivel Joints
A
B
C
D
A
B
C
D
A
B
C
D
A
B
CA
B
CA
B
CA
B
C
A
B
C
D
FMC Technologies, Inc. Flowline Products & Services
Chiksan
Swivel Joint
Specifications
59
-
Nom.Sizes
in.
CWPpsi
(bar)
EndConnec-
tions
Style 20 Style 30 Style 40 Style 50 Style 60 Style 70
PartNo. A
Wtlbkg
Part No. A B
Wtlbkg
PartNo. A B
Wtlbkg
PartNo. A B C
Wtlbkg
PartNo. A
Wtlbkg
PartNo. A B
Wtlbkg
.75 600(41) Threaded 31319264.5114
21 3131927
2.564
3.8899
31.2 3131886
2.564
3.691
31.4 3132053
2.564
3.691
3.999
42 3131928
3.8899
41.7 3131929
3.6492
2.461
62.5
1 600(41) Threaded 31319304.5114
21 3131931
2.564
3.8899
31.3 3131932
2.564
3.691
31.4 3132054
2.564
3.691
3.999
42 3131933
3.8899
41.7 3131934
3.6392
2.564
52.3
1.25 600(41) Threaded 31319355
1273
1.5 31319363
764.5114
62.5 3131937
376
4.2107
52.3 3131937
376
4.2107
4.5114
73.1 3131938
4.5114
62.5 CF
1.5 600(41) Threaded 31319405
1273
1.5 31319413
764.5114
52.2 3131942
376
4.2107
52.3 3132056
376
4.2107
4.5114
73.1 3131943
4.5114
62.5 3131944
4.25108
376
83.6
2 600(41) Threaded 31319455.75146
83.5 3131946
3.589
5.75146
104.5 3131947
3.589
6.1155
135.9 3132011
3.589
6.1155
5.8147
177.9 3131951
5.75146
156.8 3131952
6.13156
3.589
229.8
2.5 600(41) Threaded 31319546.63168
177.5 3131955
4.63118
6.88175
198.6 3131957
4.6117
7.63194
2310.5 3131959
4.6117
7.6193
6.9175
2812.7 3131962
6.88175
2310.2 3131963
7.63194
4.63118
3515.9
3600(41) Threaded 3131965
6.63168
135.7 3131966
4.63118
6.88175
165.7 3131968
4.6117
7.63194
167.3 3131970
4.6117
7.6193
6.9175
219.5 3131973
6.88175
2310.2 3131974
7.63194
4.63118
83.5
175(12) Flanged 3132204
6.63168
2712.3 3131976
5.5140
6.88175
3314.8 3131979
5.5140
7.63194
3917.7 CF CF CF
4600(41) Threaded 3131987
7.25184
188 3131988
5127
7.75197
248 3131990
5127
9.2234
3114.1 3131992
5127
9.1231
7.6193
4219.1 3131996
7.63194
3515.9 3131996
9.13231.9
5127
5022.7
175(12) Flanged 3131356
7.5191
3917.7 3131998
6.13156
8.13207
4721.4 3132001
6.13156
9.5241
5625.5 CF CF
8203
5826.4 CF
Chiksan Swivel Joint Specifications
Low-Pressure Swivel Joints - Ductile Iron
A
A A
A
B
B
A
A
BA
B
A
B
C
Typical Integral Construction Typical Threaded Construction
TripleStep and Longsweep Swivel Joints
NominalSize/
ModelColor Code
Cold WorkingPressurepsi (bar)
WecoFig. No.
SwivelJoint
Styles#1 / #2
Method of ConstructionLength in Extended Condition, Weight
Threaded 10 ft Threaded 12 ft Integral 9.5 ft*P/N
P/N-LT lb (kg)P/N
P/N-LT lb (kg)P/N
P/N-LT lb (kg)
1 HP Silver 6,000 (414) 602 50 / 50 3211995 37 (17) 3207644 41 (19) N/A 1 - 12 HP Silver 6,000 (414) 602 50 / 50 3206211 86 (39) 3205870 100 (45) N/A
1 - 12 LS Black 10,000 (690) 1502 50 / 503264538
3264538-LT 106 (48)3254780
3254780-LT N/A
Red 15,000 (1034) 1502 50 / 10 N/A N/A 3267266 132 (60)2 HP Silver 6,000 (414) 602 50 / 50 3206495 114 (52) 3205876 180 (820) N/A
2 LSBlack 10,000 (690) 1502 50 / 50 31443943144394-LT 136 (62)
31440013144001-LT 148 (67) N/A
Red 15,000 (1034) 1502 50 / 10 N/A N/A 61028056102805-LT 159 (72)
2 LSG Olive Green (Sour Gas) 10,000 (690) 1502 50 / 10 N/A N/A 6102809 159 (72)
3 HP Silver 6,000 (414) 602 50 / 50 3247975 213 (97) 3231262 234 (106) N/A
FMC Technologies, Inc. Flowline Products & Services
Chi
ksan
S
wiv
el Jo
int
Spec
ifica
tions
62
-
www.fmctechnologies.com
FMC Technologies, Inc.FMC Fluid Control2825 West Washington
Stephenville, Texas 76401Phone: 254-968-2181Fax: 254-968-5709
Broussard, LouisianaPhone: 337-837-0700Fax: 337-839-2235
Alice, TexasPhone: 361-668-0886Fax: 361-668-0905
Bossier City, LouisianaPhone: 318-752-2312 / 2973Fax: 318-549-9540
Odessa, TexasPhone: 432-552-9150Fax: 432-552-9151
Rock Springs, WyomingPhone: 307-382-4244Fax: 307-382-4454
Vernal, UtahPhone: 435-781-1790Fax: 435-781-2693
Longview, TexasPhone: 903-757-4180Fax: 903-757-2514
Mineral Wells, TexasPhone: 940-328-0800Fax: 940-328-0803
Farmington, New MexicoPhone: 505-327-0634Fax: 505-327-0641
Oklahoma City, OklahomaPhone: 405-787-6301 / 6304 / 6309Fax: 405-787-6090
Grand Junction, ColoradoPhone: 970-245-1553 / 1563 / 1557Fax: 970-245-6066
Bryan, TexasPhone: 979-778-1570Fax: 979-778-1572
Conway, ArkansasPhone: 501-329-8885Fax: 501-329-8886
Williston, North DakotaPhone: 701-572-5021Fax: 701-572-5024
Aberdeen, ScotlandPhone: +44-1224-898-555Fax: +44-1224-249-460
Dubai, United Arab EmiratesPhone: +971-4-883-0303Fax: +971-4-883-0404
SingaporePhone: +65/6-8613011Fax: +65/6-3162605
Jakarta, IndonesiaPhone: +62-21440-4151Fax: +62-21440-4050
Villahermosa, Tabasco, MexicoPhone: +52-993-310-4876Fax: +52-993-310-4879
Maracaibo, Estado Zulia, VenezuelaPhone: +58-261-736-0911Fax: +58-261-736-0201
Rio de Janeiro, BrazilPhone: +55-22-2773-0707Fax: +55-22-2773-0708
Santa Fe de Bogota, ColombiaPhone: +57-1635-1470Fax: +57-1691-8384
FMC International Service Centers
Red Deer, Alberta, CanadaPhone: 403-341-4417Fax: 403-309-9276
Redcliff, Alberta, CanadaPhone: 403-526-3321Fax: 403-526-8036
Clairmont, Alberta, CanadaPhone: 780-567-2398Fax: 780-567-2143
Stavanger, NorwayPhone: +47-51-64-65-00Fax: +47-51-64-65-01
Neuquen, ArgentinaPhone: +54-299-445-1562Fax: +54-299-445-1525
San Fernando, TrinidadPhone: 868-657-8561Fax: 868-652-0884
SingaporePhone: +65/6-545-1661Fax: +65/6-502-7411
FMC Authorized Service Centers
We put you first.And keep you ahead.
V.080811