netHD LNR200 Series Quick Connection Guide - English - R1

Information in this document is subject to change without notice. As our products are subject to continuous improvement, Lorex Technology Inc. and our subsidiaries reserve the right to modify product design, specifications and prices, without notice and without incurring any obligation. E&OE © 2013 LOREX. All rights reserved.

It’s all on the Webwww.lorextechnology.com

PACKAGE CONTENTS:

CD (includes software

and manual)

HDMI cable

Remote control

Network Video Recorder

Quick Start Guides

Power cable

Ethernet cable

USB mouse

Connecting your system

*Not included/sold separately

21 3 5Cameras* Monitor/TV* Router* Mouse Power4

ON

HDMI

Ethernet Extension Cable*

VGA*OR

Network Video Surveillance RecordernetHD LNR200 SeriesQuick Connection Guide

30 Minutes

NOTE: It may take up to 1 minute for cameras to start up and transmit video to your NVR.

netHD LNR200 Series Quick Connection Guide - English - R11-19022013

1: Left-click:• Select a menu option• During live view:

2: Right-click: Open the Quick Menu or exit menus.

Right-click to open the Quick Menu.

Using the Mouse Setting the Date & Time Searching & Playing Back Video1. Right-click to open the Quick Menu and then click

Menu.

4. Click Apply.

3.

1 2

It is important to set the correct time to assure accurate time stamps on video recordings.

2. Select Playback.

Quick Menu Overview

Network Video Surveillance RecordernetHD LNR200 SeriesQuick Connection Guide

3.

30 Minutes

3 2. Click Configuration.

3: Scroll wheel: During live view, scroll up / down to change channel.

Open the Main Menu.

Select the previous channel or group of channels. Select the next channel or group of channels.

Access system information.

Choose color output mode for the monitor.

Open Playback Mode for the cur-rently selected channel.

4. Click Playback to start playback from the earliest available footage in your selected time range.

a.

b. c.

a. b. c.

a. Select your Time Zone from the dropdown menu.

c. Click System Date and click arrows to enter the Time.

b. Click Date Format and use the on-screen calendar to enter the Date.

a. Under IP Camera, check the cameras you would like to search for video.

c. Under End Time, select the end time for your search in the same way that you selected the start time.

b. Under Start Time, select the start time for your search. Click on the left to select the start date. Click on the right to adjust the start time.

• Click on a camera to bring up the Camera Toolbar.

• Double-click on a channel to view in full-screen; double-click again to return to split-screen view.

Select a split screen layout.

1. Right-click to open the Quick Menu and then click Menu.