lot # description qty 1 lot-assorted hand tools on (1...

LOT # DESCRIPTION QTY

1 Lot-Assorted Hand Tools on (1) Bench Top 1

2 Lot-Assorted Hand Tools on and Under (1) Table with Grease Guns and Drill Knock-Out Shanks 1

3 Lot-Torx Drivers in (2) Boxes 1

4 Lot-Files in (2) Boxes 1

5 Lot-Drill Chuck Keys in (1) Bin 1

6 Lot-Drill Chuck Keys in (1) Box 1

7 Lot-Allen Wrenches in (1) Box 1





12 Lot-(4) Hand Stamp Sets with Extra Stamps in (1) Box 1

13 Lot-(2) Hand Stamp Sets in (1) Box 1











24 Lot-Hammers in (2) Boxes with Die Set Blocks 1

25 Lot-(3) Pumps 1

26 Lot-First Aid Supplies on (1) Bench Top 1

27 Lot-Assorted Shim Stock on (1) Bench Top 1

28 Lot-Assorted Sanding Disks and Sanding Sheets 1

29 Lot-Assorted Sanding Sheets and Drums 1

30 Lot-Grinding and Cut-Off Wheels in (1) Bin and (1) Box 1

31 Lot-Assorted Cut-Off Wheels, Saw Blades and Wire Wheel 1

32 Lot-Quick Change Sanding Disks and Abrasive Pads in (4) Boxes 1

33 Lot-Quick Change Sanding Disks and Grinding Stones 1

34 Lot-Quick Change Sanding Disks in Boxes 1

35 Lot-(1) Craftsman Wrench Set and (1) Sodick Tool Set 1

36 Lot-Assorted Wrenches in (1) Box 1

37 Lot-(12) Wrenches 1






43 Lot-Large Machine Wrenches 1

44 Lot-Small Machine Tools in (2) Boxes 1

45 Pittsburgh 20mm Drive Socket Set 1

46 Pittsburgh 3/4" Drive Socket Set 1

47 Pittsburgh 1" Drive Impact Socket Set 1

48 Cougar 1/2" Drive Socket Set 1

49 Lot-Assorted Breaker Bars and Extensions 1

50 Lot-Assorted Ratchets 1

51 Lot-(3) 2 1/2" Drive Impact Sockets with (1) Adaptor 1

52 Lot-(7) 1 1/2" Drive Impact Sockets with (2) Adaptors 1

53 Lot-Assorted 1" Drive Impact Sockets, Extensions and Adaptors in (2) Boxes 1

54 Lot-Assorted 3/4" Sockets in (1) Box 1

55 Lot-Assorted 1/2" Sockets in (1) Box 1

56 Lot-Machine Wrenches in (1) Box 1

57 Lot-(5) Assorted Pipe Wrenches 1

58 Lot-(2) Assorted Pipe Wrenches 1

59 Lot-(5) Assorted Tubing Benders 1

60 Lot-(3) Assorted Tubing Benders 1

61 Lot-Assorted Tubing Bender Parts 1

62 Lot-(1) Puller and (1) Crimper 1

63 Lot-Tubing Cutters and Flaring Tools in (1) Box 1

64 Lot-Snap Ring Pliers 1

65 Lot-Bolt Cutters 1

66 Lot-Gear and Bearing Pullers 1

67 Lot-Puller Tooling with Puller Parts in (1) Box 1

68 Lot-(10) Assorted Manual Conduit Benders Under (1) Bench 1

68a Lot-(2) Greenlee Bender Dies Under (1) Bench 1

69 Lot-Assorted Band Saw Blades Under (1) Bench 1

70 Lot-Die Bars and (1) Sledge Hammer Under (1) Bench 1

71 Lot-Assorted Electrical Boxes Under (1) Table 1

72 Lot-Radios, Heaters, Charger, Emergency Lighting, etc. Under (1) Table 1

73 8" Bench Vise with Rotary Base 1






of 28



80 4 1/2" Bench Vise with Rotary Base 1



83 Lot-(2) 4 1/2" and (1) 4" Bench Vises with Rotary Bases 1

84 Lot-(1) 4 1/2" and (2) 3 1/2" Bench Vises 1

85 Lot-(1) 4" and (3) 3 1/2" Bench Vises 1

86 Lot-(3) 3 1/2" Bench Vises 1

87 Lot-Air Hose Under (1) Bench 1

88 Lot-Air Hose Under (1) Bench 1

89 Lot-Extension Cords Under (1) Bench 1

90 SIMPLEX 10-Ton Capacity Hydraulic Bottle Jack 1

91 SIMPLEX 10-Ton Capacity Hydraulic Bottle Jack 1

92 Lot-(5) Assorted Hydraulic Bottle Jacks 1

93 Lot-Assorted Manual Barrel Pumps Under (1) Bench 1

94 Lot-Paint Spray Guns, Cup Guns and Parts 1

94a DYNABRADE Pneumatic 1/2-Belt Sander Set 1

95 Lot-(1) Chicago Pneumatic 3/4" Drive and (1) Ingersoll Rand 1/2" Drive Pneumatic Impact Guns 1

96 Pneumatic Straight Die Grinders 5

97 Pneumatic Angle Die Grinders 5



100 Pneumatic Drills 4





105 Pneumatic Side Grinders 3

106 Lot-(5) Assorted Pneumatic Tools 1

107 Lot-(3) Assorted Pneumatic Belt Sanders 1

108 Heavy Duty Pneumatic 2-Handle Grinders 3

109Lot-(1) Ingersoll-Rand Pneumatic 3" x 16" Pad Sander, (1) Chicago Pneumatic Orbital Sander and Air Vac in (1)

Box1

110 CHICAGO PNEUMATIC 1" Drive Straight Impact Gun 1

111 Lot-(2) Shrink Fast Guns 1

112 Lot-(1) Chicago Pneumatic 3/8" Drive Air Ratchet and (1) Pneumatic Straight Die Grinder Set 1

113 MILWAUKEE Model 4297-1, 1 1/4" Capacity Magnetic Base Drill Press, S/n 5058100241388 1

114 MILWAUKEE Model 1854-1, 3/4" Capacity Drill, S/n 567A196351114 1

115 BOSCH Model 11236VS, Electric Hammer Drill with Bits and Case 1

116 DELTA 6" Double End Bench Top Grinder 1

117 DeWALT 14" Abrasive Cut-Off Saw 1

118 MILWAUKEE Model 6230, Electric Portable Band Saw with Case 1

119 MILWAUKEE 10" Heavy Duty Circular Saw with Case 1

120 RIDGID Model 700, Electric Hand Held Pipe Threader Machine 1

121 RIDGID Model 700, Electric Hand Held Pipe Threader Machine 1

122 CRAFTSMAN 2-HP Router Variable Speed Router with Bag Case 1

123 PROTEM Model US25, Portable Hand Held Pipe Beveling Machine with Case 1

124 BIAX Electric Scraper with Case 1






130 BLACK & DECKER Electric Hand Held Shear 1

131 MILWAUKEE Side Grinder 1

132 MAKITA Side Grinder 1

133 Lot-(1) Makita Jig Saw and (1) Makita 4" Side Grinder 1

134 MAKITA Jig Saw with Case 1

135 MILWAUKEE Jig Saws 2

136 MILWAUKEE Model 5396, 1/2" Electric Drill with Case 1

137 MAKITA Model HR2511, Electric Rotary Hammer with Case 1

138 MILWAUKEE Electric Hole-Shooter with Case 1

139 MILWAUKEE 1/2" Electric Straight Drill 1

140 Lot-(2) Assorted Milwaukee 3/8" Electric Drills 1

141 Lot-(1) Hilti ST-18 Driver Gun and (1) Black & Decker 3/8" Drill 1

142Lot-(1) Ryobi 18 Volt Cordless Angle Drill with Battery & Charger and (1) Makita 9.6 Volt Cordless Drill with (2)

Batteries, Charger and Case1

143 MASTER-MITE Heat Guns 3

144 WELLER Model WTCPT Straight Solder Guns 3

145 Lot-(2) Waage Melting Pots with Supply Under (1) Table 1

145a Lot-Tarps Under (1) Table 1

146 SUNNEN External Honing Set 1

147 Lot-(2) Hones 1

148 Lot-(2) Hones 1

149 Lot-(2) Small Hones and (2) Hone Packages and (3) Hones in Cases 1

150 Lot-(2) Hones, and Hone Stones with Flex Hones in (1) Box 1

151 Lot-Hone Stones in (3) Boxes with Honing Supplies in (1) Box 1

152 Lot-Die Handles 1

152a Lot-Tap Handles 1

of 28


153 Lot-Dies in (1) Small Box with (1) Die Set 1

154 Lot-Dies in (1) Big Box 1

155 Lot-Hole Saws in (1) Box with (2) Hole Saw Sets 1

156 RIDGID 4P-J, Pipe Machine Die Head 1

157 RIDGID 141, Pipe Machine Die Head 1

158 RIDGID 815A, Pipe Die 1

159 RIDGID 811, Pipe Dies 5

160 RIDGID 811A, Pipe Dies with Stand 4

161 Lot-Assorted Pipe Dies in (1) Box 1




165 4-Piece Pipe Tool Set 1

166 4-Piece Pipe Tool Set 1

167 3-Piece Pipe Tool Set with (3) De-Bur Cutters 1

168 Lot-Assorted Attachments 1

169 Lot-(4) Ridgid Model 819, Machine Chucks 1

170 Lot-Thread Chasers in (1) Box 1

171 Lot-(2) RIDGID Pipe Threader Oiler Pans and (1) Ridgid Drive Shaft Under (1) Bench 1

172 GREENLEE Model 7306, Hydraulic Knock-Out Punch Driver Set 1

172a GREENLEE Model 7646, Hydraulic Knock-Out Punch Driver Set 1

173 GREENLEE Model 7906SB, Quick Draw Hydraulic Punch Driver Set 1

174 GREENLEE Model 7904SB, Hydraulic Punch Driver Set 1

175 GREENLEE Model 7904SB, Hydraulic Punch Driver Set 1

175a BURNDY Y644M Dieless Hypress Hand Held Power Crimper 1

176 ENERPAC Hydraulic Pump System 1

176a ENERPAC Hydraulic Pump System 1

176b ENERPAC Hydraulic Pump 1

176c ENERPAC Hydraulic Pump 1

176d Lot-(2) Assorted Enerpac Hydraulic Pumps 1

177 POWER TEAM Manual Hydraulic Pump 1

178 ENERPAC Manual Hydraulic Pump 1

179 ENERPAC Manual Hydraulic Pump 1

180 RAM-PAC Manual Hydraulic Pump 1

181 ENERPAC Foot Operated Hydraulic Pump 1

182 Lot-(2) Greenlee 767 and (1) Enerpac Manual Hydraulic Pumps 1

183 ENERPAC Foot Operated Hydraulic Pump with Holl-O-Cylinder 1

184 Hydraulic Jack System with Case 1

185 Lot-Hydraulic Tooling 1

186 Recoil Thread Repair Set 1




190 Lot-(10) Heli Coil Thread Repair Kits 1

191 Lot-(11) Heli Coil Thread Repair Kits 1

192 Lot-Thread Repair Hardware in (1) Bin 1

193 Lot-Assorted Service Kits in (3) Rows on (1) Bench 1

194 Lot-(4) Assorted Service Kits 1

195 Lot-"O" Ring Kits with "O" Rings in (1) Box 1

196 Lot-Retaining Ring Kits with Rings in 1) Box 1

197 Lot-(3) Assorted Crimp Tool Service Kits 1

198 Lot-Grinding Wheels in (2) Stacks 1



201 Lot-Assorted New Grinding Wheels in (2) Boxes 1

202 Lot-New "Green" Wheels Under (1) Bench 1

203 Lot-Used Grinding Wheels in (3) Boxes 1

204 Lot-Used Grinding Wheels in (3) Boxes 1

205 Lot-Assorted Grinding Wheels in (4) Boxes 1

206 Lot-Assorted Grinding Wheels in (5) Boxes 1

207 Lot-Grinding Shoes and Stones in (2) Boxes 1

208 Lot-Quick Change Grinding Stones in (2) Boxes with (3) Grinding Stone Sets 1

209 Lot-Assorted Bar Clamps Under (1) Bench 1

210 20" Sliding Type C-Clamps 2

211 18" Shallow Throat C-Clamps 5















of 28









233 Lot-6" and 4" Shallow Throat C-Clamps 1








241 12" Standard C-Clamps 5










251 Lot-(7) 10" and (4) 8" Standard C-Clamps 1









260 Lot-Assorted C-Clamps 1

261 8" Die Clamps 9

262 8" Die Clamps 7

263 8" Die Clamps 9

264 6" Die Clamps 4

265 4" Die Clamps 9

266 Lot-(5) 3" and (5) 2" Die Clamps 1

267 Lot-Assorted Crane Hook "C" Style Material Clamps 1

268 Lot-Assorted Spreader Bar Type Clamps 1

269 Lot-Assorted Kant-Twist Clamps, Squeeze Clamps and (3) 8" C-Clamps 1

269a Lot-Assorted C-Clamps and Die Clamps on (1) Table 1

270 32' Fiberglass Extension Ladder, (Bay 1 West) 1

271 28' Fiberglass Extension Ladder, (Bay 1 West) 1

272 12' Single Side of Extension Ladder, (Bay 1 West) 1

273 12' Fiberglass Step Ladder, (Bay 1 West) 1






280 Lot-(2) 5' and (1) 6' Fiberglass Step Ladders, (Bay 1 West) 1

281 4' Fiberglass Step Ladders, (Bay 1 West) 6

282 Lot-(1) Fiberglass, (1) Steel, (1) Aluminum and (4) Wood Short Step Ladders, (Bay 1 West) 1

283 8' Portable Stairs, (Bay 1 West) 1

284 5' Portable Stairs, (Bay 1 West) 1

284a Lot-(5) Assorted 2' and 3' Portable Steps, (Bay 1 West) 1

285 36" Portable Box Fan, (Bay 1 West) 1

285a 36" Portable Box Fan, (Bay 1 West) 1

286 36" Portable Box Fan, (Bay 1 West) 1

287 36" Portable Round Fan, (Bay 1 West) 1
















of 28








309 Lot-(4) Assorted Pedestal Fans, (Bay 1 West) 1

309a Lot-(4) Assorted Pedestal Fans, (2) Fan Heads (On Ground) and (2) Office Fans, (Bay 1 West) 1

310 Post Mounted Shop Fans, (Bay 1, East End) 6

311 Post Mounted Shop Fans, (Bay 1, West End) 5

312 Post Mounted Shop Fans, (Bay 2, East End) 7

313 Post Mounted Shop Fans, (Bay 2, (West End) 6

313a Post Mounted Shop Fans, (CNC Room) 11

314 Banding Outfit with Tools, (Bay 1 West) 1

315 Banding Cart, (Bay 1 West) 1



317a 72" J-Bar 1

318 Lot-(5) Assorted Pipe Tri-Stands, (Bay 1 West) 1

319 Lot-(4) Assorted Shop Vac Brand Vacuums, (Bay 1 West) 1

320 Lot-(6) Assorted Shop Vacuums, (Bay 1 West) 1

321 ALEMITE Pneumatic Portable Grease Dispensers, (Bay 1 West) 3

322 Lot-(3) Barrel Carts and (2) Spreaders, (Bay 1 West) 1

322a Lot-(2) Hand Carts, (1) Spool Cart and (2) Union Carbide Portable Cryogenics Tanks, (Bay 1 West) 1

322b MINUTEMAN Walk Behind Floor Machine, (Bay 1 West) 1

323 Lot-Scaffold Components, (Some in (Bay 1 West and Some Outside) 1

324 SCHUMACHER 150-Amp Capacity Portable 12-Volt Charger, (Bay 1 West) 1

325 1995 TOSHIBA BTD-13R22 CNC HORIZONTAL TABLE TYPE BORING MILL, S/N 421908, TOSNUC 777-2 4-

Axis CNC Control, 5.12" Spl., Table: 70.8" x 86.6", Travels: X-118.1", Y-90.55", Spl. 62.990",30-HP, 2,500 RPM

1

326 1994 TOSHIBA BTD-11ER16 CNC HORIZONTAL TABLE TYPE BORING MILL, S/N 441759, TOSNUC 732

CNC Control, 4.33" Spl., Table: 63" x 55", Travels: X-78", Y-59", 19.7" Spl., 20-HP, 2,500 RPM, Chip Conveyor

1

327 1994 TOSHIBA BTD-11ER16 CNC HORIZONTAL TABLE TYPE BORING MILL, S/N 441744, TOSNUC 732

CNC Control, 4.33" Spl., Table: 63" x 55", Travels: X-78", Y-59", 19.7" Spl., 20-HP, 2,500 RPM, Chip Conveyor

1

328DEVLIEG 5K-96 CNC HORIZONTAL TABLE TYPE BORING MILL, S/N 9684, Retrofitted w/FANUC OM CNC

Control, 5" Spl., Table: 50" x 96", Travels: X-72", Y-96", 26" Spl., 10 to 1,000 RPM, Power Draw Bar1

3295" SHIBAURA BFT 13C W2 HORIZONTAL TABLE TYPE BORING MILL, S/N 2779, Table 47" x 100", Travels:

68" Vertical, 100" Cross, 50" Long, 50 Taper w/Pwr Draw Bar, SONY 3-Axis DRO1

3304" NOMURA B100 RW HORIZONTAL TABLE TYPE BORING MILL, S/N 3741, Table: 56" x 63" w/Built in

Rotary, Travels: 60" Vertical, 80" Cross, 50 Taper w/Pwr Draw Bar, ANILAM MINI WIZARD 3-Axis DRO1

3313" WOTAN B75T HORIZONTAL TABLE TYPE BORING MILL, S/N 58805, Table: 39" x 32" w/Built in Rotary,

Travels: 40" Vertical, 42" Cross, 46" Long1

3322004 HAAS VF-8/50 VERTICAL MACHINING CENTER, S/N 38853, Table: 64" x 36", Travels: X-64", Y-40", Z-

30", Spl. To Table: 5"-35", 30-HP, 7,500 RPM, CT 50 Taper, 30+1 ATC, (CNC Room)1

3332003 HAAS VF-6/40 VERTICAL MACHINING CENTER, S/N 32612, Table: 4" x 28", Travels: X-64", Y-32", Z-

30", Spl. To Table: 4"-34", 30-HP, 8,100 RPM, CT 40 Taper, 24+1 ATC, (CNC Room)1

334FADAL 6030 VERTICAL MACHINING CENTER, S/N 901067, 88 CNC Control Table: 62.5" x 30", Travels: X-

60", Y-30", X-30", 22.5 HP, 10,000 RPM, CAT 40 Taper, 20+1 ATC, (CNC Room)1

335

ENSHU VMC-530 VERTICAL MACHINING CENTER, S/N 138, FANUC 11M CNC Control, Table: 51.2" x 21.7",

Travels: X-40", Y-21", Z-22.6", 40-4,000 RPM, CAT 50 Taper, 30 ATC, NIKKEN 16" 4th Axis w/Tailstock (Sold

Separately), (CNC Room)

1

336FADAL 4020 VERTICAL MACHINING CENTER, S/N 9303164, 88HS CNC Control, Table: 47" x 20", Travels: X-

40", Y-20", Z-20", 15 HP, 10,000 RPM, CT 40 Taper, 21 ATC, RIGID Tap, (CNC Room)1

337FADAL 4020 VERTICAL MACHINING CENTER, S/N 9303165, 88HS CNC Control, Table: 47" x 20", Travels: X-

40", Y-20", Z-20", 15 HP, 10,000 RPM, CT 40 Taper, 21 ATC, RIGID Tap, (CNC Room)1

338ENSHU 400 VERTICAL MACHINING CENTER, S/N N/A, FANUC 6M CNC Control, Table: 36" x 16", Travels: X-

22.4", Y-16", Z-18.4", 7.5 kw, 80-8,000 RPM, (CNC Room)1

339 FADAL VMC 40 VERTICAL MACHINING CENTER, S/N 8607490, (CNC Room) 1

340

MONARCH SIDNEY 220 CNC LATHE, S/N 54071, FANUC 11T CNC Control, 150" Centers, 36" Max. Swing,

24" 3-Jaw Chuck, 9.5" Thru Hole, 26" Swing Over Cross Slide, 75 HP, 6 Station Turret, 4 Range Headstock:25-

176, 59-415, 54-376, 127-890 RPM'S, Chip Conveyor, (Bay 2 Center)

1

340a Lot-Jaws with Rack, (Bay 2 Center Behind Monarch Lathe), (Bay 2 Center) 1

341

MAZAK QT-20 TURNING CENTER, S/N 56486, MAZATROL T-1 CNC Control, 20" Max. Swing, 12" Max.

Cutting Dia., 40.75" Max. Length, 3.15" Spl Bore, A2-8 Spl. Nose, 12-3,000 RPM, 20 HP, Travels: X-7.1", Z-

41.4", (CNC Room)

1

342

MAZAK QT-20 TURNING CENTER, S/N 54741, MAZATROL T-1 CNC Control, 20" Max. Swing, 12" Max.

Cutting Dia., 40.75" Max. Length, 3.15" Spl Bore, A2-8 Spl. Nose, 12-3,000 RPM, 20 HP, Travels: X-7.1", Z-

41.4", (CNC Room)

1

343MAZAK SLANT TURN 20-ATC M/C CNC LATHE, S/N 93956, MAZATROL T32-3 CNC Control, 8" Chuck, Live

Tooling, "C" Axis, Chip Conveyor, (CNC Room)1

344MAZAK M5-1500 CNC LATHE, S/N 46142, FANUC 6T CNC Control, 18" 3-Jaw Chuck, Chip Conveyor, (CNC

Room)1

345MAZAK M5-1500 CNC LATHE, S/N 6826, FANUC 6T CNC Control, 18" 3-Jaw Chuck, Chip Conveyor, (CNC

Room)1

346MAZAK M4 CNC LATHE, S/N 5800, FANUC 6T CNC Control, 15" 3-Jaw Chuck, 25/30 HP, Chip Conveyor,

(CNC Room)1

350 ROTO-TECH 36" POWER TILT/ROTARY TABLE, S/N 5731 1

of 28


351 GIDDINGS & LEWIS 36" x 36" HYDROSTATIC AIRLIFT ROTARY TABLE 1

352 GIDDINGS & LEWIS 30" x 30" HYDROSTATIC AIRLIFT ROTARY TABLE 1

353 PRATT & WHITNEY PO 1828-9 TILT/ROTARY TABLE 1

354 NIKKEN 16" 4TH AXIS ROTARY TABLE, S/N 4162 1

355 NIKKEN 16" 4TH AXIS ROTARY TABLE, S/N N/A 1

356 MMK TECKNARA 10" 4TH AXIS ROTARY TABLE 1

358 TROYKE 14" x 14" T-Slotted Rotary Table, (Bay 2 West) 1

359 14" x 18" T-Slotted Sine Plate with Case, (Bay 2 West) 1

360 Right Angle Head Attachment, (Bay 2 West) 1

361 Right Angle Head Attachment, (Bay 2 West) 1

362 Lot-(3) Spindle Extensions, (Bay 2 West) 1

363 Spindle Motor for Fadal 6040, (Bay 2 West) 1

363a Machine Part in (1) Crate, (Bay 2 Center) 1

363b Die Plate with (6) Dadco Cylinders, (Bay 2 Center) 1

363c Lot-(1) Machine Spindle and (1) Shaft, (Bay 2 Center) 1

363d Lot-(2) HWH 500-Volt, 74.5 KA, 700-KVA ST1 Transformers in (1) Crate, (Bay 2 Center) 1

363e Lot-(3) Tie Rods in (1) Crate, (Bay 2 Center) 1

364 Motor for 22MH1, (Bay 2 West) 1

365 GIDDINGS & LEWIS Motor, (Bay 2 West) 1

366 KYONAN 7 KVA Transformer, (Bay 2 West) 1

367 ETTCO Angle Head Attachment, (Bay 2 West) 1

367a Spindle Nose Piece, (Bay 2 West) 1

368 Lot-Boring Mill Fixture Plates with Stand, (Bay 2 West) 1

369 Lot-Nosepieces, Rings, etc. in (1) Crate, (Bay 2 West) 1

370 46" Diameter Drilled & Tapped Machine Table 1

371 29 1/2" x 29 1/2" Drilled & Tapped Machine Plate 1

372 41" x 41" Drilled & Tapped Machine Plate 1

373 36" x 36" Drilled & Tapped Machine Plate 1

374 20" x 116 1/2" T-Slotted Machine Table with Tailstock 1

375 Pair 18 1/2"W x 108"H x 42 1/4"D Drilled & Tapped Angles 1

376 Pair 22 1/4"W x 90"H x 38"D Drilled & Tapped Angles 1

377 Pair 12"W x 72"H x 36"D Drilled & Tapped Angles 1


379 Pair 20"W x 60 1/2"H x 24"D T-Slotted Angles 1

380 Pair 10"W x 60"H x 29 3/4"D Drilled & Tapped Angles 1


382 Pair 10 1/2"W x 50 1/2"H x 25 1/2"D Drilled & Tapped Angles 1







389 Pair 9 3/4"W x 48"H x 17 3/4"D Drilled & Tapped Angles 1





394 Pair 5"W x 40"H x 48"D Angles 1



397 12 1/2"W x 72 1/2" x 28" Drilled & Tapped Angle 1

398 10 1/2"W x 48"H x 18"D Drilled & Tapped Angle 1

399 24"W x 24"H x 18"D Drilled & Tapped Angle 1

400 12"W x 29 1/2"H x 19 1/2"D Drilled & Tapped Angle 1

401 Pair 8 1/4"W x 18"H x 8"D Angles 1

402 Pair 8"W x 16"H x 9"D Angles 1

403 4 1/4"W x 24"H x 18"D Angles 3

404 4 1/4"W x 18"H x 6"D Angles 4

405 Lot-(5) Assorted Angles 1

406 Pair 24 1/2"W x 12"H x 12"D V-Blocks, (Bay 2 Middle) 1

407 Pair 22 1/2"W x 12"H x 12"D V-Blocks, (Bay 2 Middle) 1

408 Pair 12"W x 12"H x 12"D V-Blocks, (Bay 2 Middle) 1

409 Pair 12 1/2"W x 9"H x 8 1/4"D V-Blocks, (Bay 2 Middle) 1

410 Pair 17 1/2"W x 10 1/2"H x 5"D Roller Type V-Blocks, (Bay 2 Middle) 1

411 Lot-Assorted Angles on (1) Skid, (Bay 2 Middle) 1

412 Pair 60"L x 7 3/4"H x 3"D Parallels, (Bay 2 Middle) 1


414 Pair 60"L x 6"H x 3"D Parallels, (Bay 2 Middle) 1








422 Lot-Assorted Parallels, (Bay 2 Middle) 1

423 60"L x 10 1/2"H x 11 3/4"D Parallel Risers, (Bay 2 Middle) 3

424 Lot-Assorted Riser Blocks, (Bay 2 Middle) 1

of 28


425 50-Taper Tool Holder with RENISHAW MP9 PROBE 1

426 50-Taper Tool Holder with RENISHAW MP9 PROBE 1

427 BIG NEW HIGH NXG7; Speed Ratio 7; 20,000 RPM High Speed Spindle 1

428 YUASA 50-Taper Tool Holder with Collets 1

428a Tool Holder Adaptors 2

429 50-Taper Tool Holder with Micro-Bore 1



432 50-Taper Tool Holders with Micro-Bores 2



435 50-Taper Tool Holders with Assorted Cutters 3

436 50-Taper Tool Holder with Boring Head 1















451 50-Taper Tool Holders with Boring Heads 4


453 50-Taper Tool Holders with Spade Drills 4

454 50-Taper Tool Holders with Spade Drills 5

455 50-Taper Tool Holders with Jacobs 20N Chucks 3








463 50-Taper Tool Holders with Assorted Chucks 5



466 50-Taper Tool Holders 3

467 50-Taper Tool Holders with Face Mills 2















482 50-Taper Tool Holders with Milling Cutters 8



485 50-Taper Tool Holders with Boring Holders 5



488 50-Taper Tool Holders with Cutters 5










498 50-Taper Tool Holders with Counterbores 4

499 50-Taper Tool Holders with Mills 5


501 50-Taper Tool Holders with Roughing Mills 5


of 28




















521 50-Taper Tool Holders with Center Drills 5

522 50-Taper Tool Holders with Drills 5








































562 50-Taper Tool Holders with Tap Holders 5








570 50-Taper Tool Holders with Boring Bars 6

571 50-Taper Tool Holders with Drill Chucks 3











of 28




























































640 50-Taper Tool Holders with Taps 5






646 50-Taper Tool Holders with Drills and Reamers 5






652 50-Taper Tool Holders with Drills and Reamer 5



655 50-Taper Tool Holders with Insert Cutters 5






of 28














675 40-Taper Tool Holders with Slot Cutters 4









684 40-Taper Tool Holders with Counterbores 4


















































734 40-Taper Tool Holders with Milling Cutters 2








of 28





















761 40-Taper Tool Holders with Reamers and Counterbore 4




765 40-Taper Tool Holders with (2) Jacobs 16N Chucks and (4) Jacobs 14N Chucks 6













777a 50-Taper Tool Holder Racks, (Bay 1 East) 5

777b 50-Taper Tool Holder Racks, (Bay 1 East) 3

777c Lot-(2) 50-Taper Tool Holder Racks, (Bay 1 East) 1

777d HUOT Super Scoot 50-Taper Tool Holder Carts, (Bay 1 East) 3

777e 50-Taper Tool Holder Carts, (Bay 1 East) 2

777f 50-Taper Tool Holder Carts, (Bay 1 East) 2

777g SHUTER 50-Taper Tool Holder Carts, (Bay 1 East) 3

777h HOUT Tool Scoot 40-Taper Tool Holder Cart, (Bay 1 East) 1

777j 40-Taper Tool Holder Carts, (Bay 1 East) 2

777k Lot-(2) Sections of 40-Taper Tool Holder Shelving with (1) Cart, (Bay 1 East) 1

778 YASKAWA Servo Unit, (Bay 2 West) 1

779 Face Plate, (Bay 2 West) 1

780 MAZAK Micro Disk System, (Bay 2 West) 1

781 GRECO Systems CNC Mini-File, (Bay 2 West) 1

782 Lot-Face Plates on (1) Pallet, (Pallet Not Included), (Bay 2 West) 1

783 Holders in (1) Box, (Bay 2 West) 3









792 Extended Reach Holder in (1) Box, (Bay 2 West) 1

793 Sleeves in (1) Box, (Bay 2 West) 6





798 Lot-Sleeves in (1) Box, (Bay 2 West) 1





803 Lot-Holders in (1) Box, (Bay 2 West) 1



806 Lot-(4) Holders with Drills, (Bay 2 West) 1

807 Lot-(5) Holders with Drills, (Bay 2 West) 1

808 Lot-Holders in (2) Boxes, (Bay 2 West) 1

809 Lot-Misc. Tooling in (1) Box, (Bay 2 West) 1

810 Lot-(4) Assorted Tool Holders in (2) Boxes, (Bay 2 West) 1

of 28


811 Lot-Quick Change Tooling in (1) Box, (Bay 2 West) 1













824 Lot-(5) Assorted Boring Heads in (1) Box, (Bay 2 West) 1

825 Lot-Misc. Tooling on (1) Pallet, (Pallet Not Included), (Bay 2 West) 1

826 Lot-Jaws on (1) Pallet, (Pallet Not Included), (Bay 2 West) 1



830 Lot-Assorted Tooling in (10) Boxes and (1) Holder Stand, (Bay 1 East) 1

831 Lot-Assorted Collets on (3) Stands on (1) Pallet, (Pallet Not Included), (Bay 1 Middle) 1

831a Lot-Assorted Collets in (8) Boxes and (8) Stands on (1) Pallet, (Pallet Not Included), (Bay 1 Middle) 1

831b Lot-Assorted Collets on (1) Pallet, (Pallet Not Included), (Bay 1 Middle) 1

831c Lot-Assorted Collets on (1) Pallet, (Pallet Not Included), (Bay 1 Middle) 1

831d Lot-Assorted Collets on (1) Pallet, (Pallet Not Included), (Bay 1 Middle) 1

835

2005 CHAMILLES ROBOFIL 440CC WIRE EDM, S/N 931357, (NEW 2004), Table: 35.43" x 23.62", Max. Work

Piece: 47" x 27" x 15.7", Travels: X-21.65", Y-13.78", Z-15.7", UV Travel: 21.65" x 13.77", Wire Dia: .004"-.012",

Taper Cap: 0-30 Degree, (Toolroom)

1

836

2004 CHAMILLES ROBOFIL 440CC WIRE EDM, S/N 913117, (NEW 2004), Table: 35.43" x 23.62", Max. Work

Piece: 47" x 27" x 15.7", Travels: X-21.65", Y-13.78", Z-15.7", UV Travel: 21.65" x 13.77", Wire Dia: .004"-.012",

Taper Cap: 0-30 Degree, (Toolroom)

1

836a Lot-EDM Tooling with (1) Tooling Cabinet and (1) Cart, (Toolroom) 1

837 JAPAX SA03-1 WIRE EDM, S/N 322-00-116, JAPT 3 FM CNC Control, (Toolroom) 1

838BLANCHARD 32K-60 ROTARY SURFACE GRINDER, S/N 13078, 100 HP, 60" Electro-Mag Chuck,

Incremental Downfeed w/Rapid Travers, In Base Coolant, Sludge Conveyor, (Bay 2 East)1

839 JARBE/DOiMAK RUA 1500 HYDRAULIC UNIVERSAL OD/ID GRINDER, S/N 110, OD Cap: 16" x 80", 6" x 20"

Max. Wheel, Drop Down ID Spl, Vari-Speed Head Stock, Coolant System w/ENCYCLON Filter, (Toolroom)

1

840LANDIS 12" x 48" HYDRAULIC OD GRINDER, S/N 460-29, 2" x 14" Wheel, 12" Dia. Permanent Mag. Chuck,

Vari-Speed Head Stock, (Toolroom)1

841

BRYANT UNIVERSAL INTERNAL GRINDER, S/N Y-14094, Cross Sliding Sine Bar Work Head, 20" Face Plate

w/12" Mag. Chuck, 5 HP Grinding Spl., 16" Grinding Stroke, Diamond Wheel Dresser, Coolant System,

(Toolroom)

1

842THOMPSON 14" x 78" HYDRAULIC SURFACE GRINDER, S/N 6C-586057, 14" x 78" Electro-Mag. Chuck, 30

HP Spl., Coolant System, (Toolroom)1

8431993 KENT 12" x 24" AUTOMATIC HYDRAULIC SURFACE GRINDER, S/N 98056804, 12" x 24" Electro-Mag,

Chuck, Incremental Downfeed w/Rapids, Coolant System1

844 GALLMEYER & LIVINGSTON S-20 6" x 18" HAND FEED SURFACE GRINDER, S/N 9-20315 1

845 REID ROLLAWAY 618 SURFACE GRINDER, S/N 20041, (Toolroom) 1

846 HEINMAN FSG-618M HAND FEED SURFACE GRINDER, S/N A3849005 1

847 HEINMAN FSG-618M HAND FEED SURFACE GRINDER, S/N A3849008, (Building 2) 1

848 HEINMAN FSG-618M HAND FEED SURFACE GRINDER, S/N A3849087, (Building 2) 1

848aSZERSZAMGEPIPARI MOVEK SZ HAND FEED SURFACE GRINDER, S/N 790264, (No Magnetic Chuck),

(Bay 2 West)1

848b GARDNER 618, 6" x 18" HAND FEED SURFACE GRINDER, S/N 596-23, (Building 2) 1

849MOORE NO. 3 JIG GRINDER, S/N G-291, 40,000 RPM Grinding Spl., 12" x 26" Table, ANILAM 2-Axis DRO,

(Toolroom)1

849a MOORE 11" Rotary Table with Jig Grinder Tooling in (1) Cabinet, (Toolroom) 1

850 CAPITOL TOOLING INC. 10" x 60" CENTER LAP, S/N N/A, Diamond Dresser Attachment, (Toolroom) 1

851 CINCINNATI MONOSET TOOL & CUTTER GRINDER, S/N 31521C5U-33, (Bay 2 Grinder Crib) 1

852 CINCINNATI NO. 2 TOOL & CUTTER GRINDER, S/N ID2T1W-143, (Bay 2 Grinder Crib) 1

853 YUASA XG-801 DRILL POINT GRINDER, S/N 5459, (Bay 2 Grinder Crib) 1

854 STERLING DRILL POINT GRINDER, S/N DG5228, (Bay 2 West) 1

857 ACER 3VKH 3 HP CNC RAM TYPE TURRET MILL, S/N 9388321, w/Power Draw Bar, (Bay 2 West) 1

858 BRIDGEPORT SERIES I 2 HP RAM TYPE TURRET MILL, S/N SE7933, 2-Axis DRO, (Bay 2 Center) 1

859 BRIDGEPORT SERIES I 2 HP RAM TYPE TURRET MILL, S/N 94364, 2-Axis DRO, (Bay 2 West) 1

860 BRIDGEPORT SERIES I 2 HP RAM TYPE TURRET MILL, S/N BR 278201, 2-Axis DRO, (Bay 2 West) 1

860a BRIDGEPORT SERIES I 1-1/2 HP RAM TYPE TURRET MILL, S/N BR12 160805, (Building 2) 1

861FIRST LC-185V3 3 HP RAM TYPE TURRET MILL, S/N 4111100, w/2-Axis Power Feed Table, 2-Axis DRO,

(Bay 2 Center)1


(Bay 2 East)1


(Building 2)1

864MILLTRONICS PARTNER 3 HP RAM TYPE TURRET MILL, S/N 1948, w/2-Axis Power Feed Table, 2-Axis

DRO, (Bay 2 East)1

865 BRIDGEPORT SERIES II 2 HP RAM TYPE TURRET MILL, S/N 160790, w/2-Axis DRO, (Bay 1 East) 1

866 LAGUN FTV-1 4 HP RAM TYPE TURRET MILL, S/N N/A, (Bay 1 East) 1

867 IKEDA RM1500 RADIAL ARM DRILL, S/N 77057, (Bay 1 East) 1

868 CLAUSING NO. 2287 VARI-SPEED TABLE TYPE DRILL PRESS, S/N 533943, (Bay 1 East) 1

of 28


869 ALLEN VARI-SPEED FLOOR TYPE DRILL PRESS, S/N N/A, (Bay 2 West) 1

870 ALLEN VARI-SPEED FLOOR TYPE DRILL PRESS, S/N N/A, (Building 2) 1

871 WILTON 20" VARI-SPEED FLOOR TYPE DRILL PRESS, S/N 5010124, (Building 2) 1

872SUMMIT 20" x 80" ENGINE LATHE, S/N 4593, 12" 3-Jaw Chuck, 4" Hole Thru Spl., Quick Change Tool Post,

Steady Rest, Taper Attachment, (CNC Room)1

873 OKUMA L-S 22" x 52" ENGINE LATHE, S/N 11256 1

874 SOUTH BEND 13" x 48" TOOLROOM LATHE, S/N 12794, (Building 2) 1

875 SOUTH BEND HKX13 16" x 36" TOOLROOM LATHE, S/N 9584, (Bay 1 East) 1

875a LeBLOND 16" TOOLROOM LATHE, S/N N/A, (CNC Room) 1

875b SOUTH BEND 14" TOOLROOM LATHE, S/N 5641, (CNC Room) 1

876 DoALL C-260A AUTOMATIC HORIZONTAL BANDSAW, S/N 459-89404, (Bay 2 East) 1

877 WF WELLS, W-9-1 HORIZONTAL BANDSAW, S/N 4984 1

877a JET HBS-1018W 10" x 18" HORIZONTAL BANDSAW, S/N 607137 1

877b MSC 09518853 HORIZONTAL BANDSAW, S/N 9527910, (Building 2) 1

877c MSC 40051690 HORIZONTAL BANDSAW, S/N 412576, (Building 2) 1

878 DoALL TF-1421H VERTICAL TILT FRAME BANDSAW, S/N 363-81513, (Bay 2 East) 1

879 GROB 4V-36 VERTICAL BANDSAW, S/N 1306, (Bay 2 West) 1

880 MILWAUKEE VERTICAL PANEL SAW, S/N N/A, (Bay 1 West) 1

880a DeWALT 10" COMPOUND MITER SAW, S/N N/A, with Stand 1

880b DeWALT 10" COMPOUND MITER SAW, S/N N/A, with Stand 1

881 EISELLE VMS-11-S MITERING COLD SAW, S/N 2556, (Bay 1 East) 1

882 FDM CHOP SAW, S/N N/A, w/SONY DRO, (Building 2) 1

882a EVERETT 12" ABRASIVE CUT-OFF SAW, S/N N/A, (Bay 2 West) 1

882b NO IDENTIFYING NAME 12" ABRASIVE CUT-OF SAW, S/N N/A, (Bay 1 East Cart Room) 1

883 HPM 300 TON-CU-2 HYDRUALIC PRESS, S/N 68-91, 72" x 48" Bed, 72" Shut Height 1

884 ELECTRO-ARC 28A 10KVA TAP DISINTEGRATOR, (Bay 2 West) 1

885 SUPERIOR J2 HONING MACHINE S/N 1-6104, with Tooling and Cabinet, (Bay 2 West) 1

886 OLSEN 50DBF FLARING MACHINE, S/N 3702, (Bay 2 West) 1

887 OLSEN 50DBF FLARING MACHINE, S/N 3227, (Bay 2 West) 1

888 OLSEN 50DBF FLARING MACHINE, S/N 3750, (Building 2) 1

890 PARKER FLARING MACHINE, S/N N/A 1

891 WHEELABRATOR-HUTSON BURR-BENCH FINISHING MACHINE, (Bay 2 West) 1

892 DEE-BLAST 36" x 48" SHOT BLAST CABINET, (Bay 2 West) 1

892a DREITZLER 24" x 44" SHOT BLAST CABINET, (Bay 2 West) 1

893 CHICAGO HS414 HYDRAULIC SHEAR, S/N 3284977, (Bay 2 West) 1

893a DI-ACRO NO. 36, 36" MANUAL BENCH TOP SHEAR, S/N N/A, with Steel Table Stand, (Bay 1 West) 1

893b DI-ACRO NO. 24, 24" BENCH TOP FINGER BRAKE, S/N 3045, (Stand Not Included), (Bay 1 West) 1

894 DAKE 75H 75 TON HYDRAULIC SHOP PRESS, S/N 160631, (Bay 2 West) 1

895 PARKER HANNIFIN HYDRAULIC CRIMPER with Tooling, (Bay 2 West) 1

896 RIDGID 535 POWER THREADER, S/N 358537, (Bay 2 West) 1

897 RIDGID 535 POWER THREADER, S/N 396176, (Bay 2 West) 1

898 H & H 2104-TC TAPPING MACHINE w/Table, (Building 2) 1

899 MILLER SYNCROWAVE 350 TIG WELDER, S/N JK721515, (Bay 1 West) 1

900 MILLER SYNCROWAVE 250DX TIG WELDER, S/N LF192515, (Bay 1 West) 1

901 MILLER DELTAWELD 450 MIG WELDER, S/N JC623937, (Building 2) 1

902 HOBART RC-500, 500 AMP MIG WELDER, S/N 20RT-6929, (Bay 1 West) 1

903 LINDE VI-206 MIG WELDER, S/N B-76B09113, (Bay 1 West) 1

904 MILLER GOLDSTAR 400 SS ARC WELDER, S/N JA361674, with Stand, (Bay 1 West) 1

905 MILLER DIALARC HF 250 ARC WELDER, S/N JJ374939, (Bay 1 West) 1

905a LINCOLN IDEALARC 250 ARC WELDER, S/N AC-375256, (Building 2) 1

906 MILLER SPECTRUM 500DC PLASMA CUTTER, S/N KB011326, (Bay 1 West) 1

907 HOBART SMOOTHCUT 625 PLASMA CUTTER, S/N P1403 092, (Bay 1 West) 1

908 EDDYTHERM I-6 INDUCTION HEATER with Cart, (Inspection) 1

909 Lot-Torch Gages in (2) Boxes, (Bay 1 West) 1

909a Lot-Torch Gages in (2) Boxes, (Bay 1 West) 1

909b Lot-Torch Gages in (3) Boxes, (Bay 1 West) 1

909cLINDE CM-45 Line Burner Head with (2) Oxygen/Acetylene Hoses with Gages and (1) Torch, (Bay 1 West)

1

909d Lot-Assorted Stick and Tig Welding Rods, (Bay 1 West) 1

909e Lot-Assorted Welding Wire, (Bay 1 West) 1

909f Lot-Assorted Welding Supplies, Hose (No Gages) and Lead Melting Supplies, (Bay 1 West) 1

909g Lot-(5) Assorted Tank Carts, (Bay 1 West) 1

910 Lot-(1) 54" x 108", (1) 47" x 56", (1) 48" x 60" and (1) 31" x 36" Steel Welding Tables, (Bay 1 West) 1

911 Phoenix Dry Rod Electrode Stabilizing Ovens, (Bay 1 West) 2

912 OLIVER NO. 82, 15" VERTICAL DISK SANDER, S/N 36691, (Bay 2 West) 1

913ROCKWELL/DELTA COMBINATION 6" VERTICAL BELT x 12" VERTICAL DISK SANDER, S/N N/A, (Bay 2

West)1

914 ROCKWELL 31-501, 6" VERTICAL BELT SANDER, S/N CV8867, (Bay 2 West) 1

914a NO IDENTIFYING NAME 6" VERTICAL BELT SANDER, (Bay 1, East) 1

915 DAYTON 1Z858M, 10" X 1-HP DOUBLE END PEDESTAL TYPE GRINDER, S/N N/A, (Bay 2 West) 1

916 DAYTON 1Z253M, 10" x 1-HP DOUBLE END PEDESTAL TYPE GRINDER, S/N N/A, (Bay 2 West) 1

917 BALDOR 330B, 10" x 3/4 HP, DOUBLE END PEDESTAL TYPE GRINDER, S/N N/A, (Building 2) 1

918 NO IDENTIFYING NAME 10" DOUBLE END PEDESTAL TYPE GRINDER, S/N N/A, (Bay 2 West) 1

919 DAYTON 1Z707, 8" x 3/4-HP DOUBLE END PEDESTAL TYPE GRINDER, S/N N/A, (Bay 2 West) 1

920 WT 8" DOUBLE END PEDESTAL TYPE GRINDER, S/N N/A, (Bay 2 West) 1

921 SOUTH BEND 8" DOUBLE END PEDESTAL TYPE GRINDER, S/N P0134, (Bay 2 West) 1

922 BALDOR 7307, 6" x 1/2-HP DOUBLE END PEDESTAL TYPE GRINDER, S/N W398, (Bay 2 West) 1

923 BALDOR 7307D, 6" x 1/2-HP DOUBLE END PEDESTAL TYPE GRINDER, S/N P1075, (Bay 2 West) 1

924 BALDOR 7309, 6" x 1/2-HP DOUBLE END PEDESTAL TYPE GRINDER, (Bay 2 Center) 1

of 28


925 BALDOR 712, 6" x 1/2-HP DOUBLE END PEDESTAL TYPE GRINDER, (CNC Room) 1

926 PROSSER 1/2-HP CARBIDE GRINDER, DOUBLE END PEDESTAL TYPE, S/N 8099NA79, (Bay 2 West) 1

927NO IDENTIFYING NAME 6" X 1/2-HP CARBIDE GRINDER, DOUBLE END PEDESTAL TYPE, S/N N/A, (Bay 2

West)1

928BALDOR 500, 6" x 1/2-HP CARBIDE GRINDER, DOUBLE END PEDESTAL TYPE, S/N N/A, (Bay 2 West)

1

929BALDOR 500, 6" x 1/2-HP CARBIDE GRINDER, DOUBLE END PEDESTAL TYPE, S/N N/A, (Bay 2 West)

1

930 GLENDO MDX ACCU-FINISH SINGLE LIP FACE GRINDER, S/N AF2901, (CNC Room) 1

931 SAFETY-KLEEN MODEL 30, PARTS WASHER TANK, S/N 30260442, (Building 2) 1

932 SER PARTS WASHER TANK, S/N N/A, (Bay 2 West) 1



935 NO IDENTIFYING NAME PARTS WASHER TANK, (Bay 2 West) 1

936 HAMMOND DK-6-B, BAG HOUSE DUST COLLECTOR, S/N 14224, (Bay 2 Grinder Crib) 1

937 TORIT DONALDSON VIBRA SHAKE 1200, PORTABLE DUST COLLECTOR, S/N 1934439, (Toolroom) 1

938 MFG PORTABLE INDUSTRIAL AIR CLEANER, S/N N/A, (Building 2) 1

938a DAYTON 6C503A DUST COLLECTOR, S/N N/A, (Bay 2 West) 1

938b TORIT DFT2-8 DUST COLLECTOR, S/N N/A, (Outside North Yard) 1

939MANHATTAN 951220, 16" FLOOR STANDING DRILL PRESS, S/N 237538, with Stand, (Bay 2 Grinder Crib)

1

940 MANHATTAN 951230, 16" FLOOR STANDING DRILL PRESS, S/N 165900, (Building 2) 1

941 NO IDENTIYING NAME HYDRAULIC BENDER with Tooling and Cart, (Building 2) 1

942 PARKER 424 MANUAL BENDER, S/N 2279S, with Tooling, (Building 2) 1

943 PARKER 424 MANUAL BENDER, S/N 2273, with Tooling, (Bay 2 West) 1

944 PARKER 420 MANUAL BENDER, S/n 1397S, with Tooling, (Bay 2 West) 1

944a PARKER 420 MANUAL BENDER, S/N 1639, (Bay 2 West) 1

945 ASI SURF ALLOY 1700M, SURF WELDER, (Bay 2 West) 1

946 PRO SPRAY 1000, PORTABLE AIRLESS SPRAYER SYSTEM, (Bay 2 West) 1

947 ELECTRO-MATIC A1-7-2, PORTABLE DEMAGNETIZER, S/N PK21961, Cabinet Base, (Toolroom) 1

948 ELMATCO LAS 15 PASS THRU DEMAGNETIZER, S/N 8565798X, (Building 2) 1

949PENNSYLVANIA 7500, DIGITAL READOUT SCALE, 48" x 48" FLOOR PLATE, S/N 308274, (Bay 1 Crib

Room)1

950JOLIET EQUIPMENT CORP. DC GENERATOR, MODEL & S/N N/A, 200-HP, Allen Bradley Controls, Skid

Mounted, (Bay 2 East)1

951 Bench Top Arbor Press 1

952 Bench Top Arbor Press, (Stand Not Included), (Bay 1 West) 1

956 MINUTE-MAN Broach Set 1

957 DUMONT Broach Set 1

958 DUMONT Broach Set 1

959 HS Broach Set 1

960 Lot-(2) Assorted Minute-Man Broach Sets 1

961 Lot-Broaching in (1) Box 1

962 Lot-Broaching in (1) Box 1

963 Lot-Broaching in (2) Boxes 1

964 Lot-Assorted Diamond Wheels 1

965 Lot-Arbors in (1) Box 1

966 Lot-Arbors in (1) Box 1

967 Lot-Dead Centers in (1) Box 1

968 Lot-Collets in (1) Box 1

969 Lot-Norton Pacesetter Grinding Shoes Under (1) Bench 1

970 Tool Holder Fixtures 3

971 Tool Holder Fixtures 2

972 Bearing Presses 2

973 Lot-(4) Reamer Indexes, (Partial Sets) 1

974 Lot-(4) Reamer Indexes, (Partial Sets) 1

975 Lot-(2) Reamer Indexes and 4-Drawer Reamer Cabinet, (Partial Sets) 1

976 3-Drawer Tap Index Cabinets 4

977 Taper Shank Drill Index, (Partial) 1




981 Lot-(6) Assorted Drill Indexes, (Partial) 1





986 Multi-Tier Drill Indexes, (Partial) 4

987 Drill Indexes, (Partial) 5





992 3-Drawer Drill Indexes, (Partial) 5

993 Multi-Drawer Drill Indexes, (Partial) 7

994 Lot-(11) Drill Sets with Stands 1



997 Lot-Assorted Drill Indexes in (1) Box 1

of 28


998 Lot-(6) Assorted Drill Indexes 1

999 Lot-(4) Assorted Drill Indexes 1

1000 Lot-(3) Electroplating Units 1

1001 8" Machine Vise 1





1006 KURT 8" Machine Vise 1































1037 KURT 6" CNC Machine Vise 1




1041 5" Machine Vises 3


1043 5" Inclinable Machine Vise 1



1046 Lot-(1) Wilton 4", (1) No Name 4" and (1) Palmgren 2 1/2" Machine Vises 1

1047 PHASE II 10" Rotary Table with 7 1/2" 3-Jaw Chuck 1

1048 HARTFORD 8" 3-Jaw Super Spacer 1

1049 ATA 15" Rotary Table 1

1050 PHASE II 10" Rotary Table 1

1051 WALTER Dividing Head 1

1052 Lot-Machine Handles 1

1053 Lot-Jaws in (1) Box 1





1058 10" 3-Jaw Chuck 1

1059 10" 3-Jaw Chuck 1

1060 8" 3-Jaw Chuck 1

1061 8" x 8" Precision Vacuum Chuck 1

1062 Lot-(2) Assorted Sine Bars 1

1063 Lot-(1) 6 1/2" x 6 1/2", (1) 6" x 6" and (1) 3 1/4" x 6" Sine Plates 1

1064 6" x 12" Sine Plate 1

1065 6" x 12" Sine Plate 1

1066 9" x 9" Sine Plate 1

1067 12" x 12" Compound Sine Plate 1

1068 8" x 12" Sine Plate 1

1069 6" x 11" Sine Plate 1

1070 6" x 12" Compound Magnetic Sine Chuck 1

1071 6" x 6" Compound Magnetic Sine Chuck 1

1072 6" x 6" Magnetic Sine Chuck 1

1073 6" x 6" Magnetic Sine Chuck 1

1074 SUBURBAN 6" x 6" Magnetic Sine Chuck 1

1075 SUBURBAN 12" x 12" Magnetic Chuck 1


of 28



1078 WALKER CERAMAX 6" x 12" Magnetic Chuck 1

1079 WALKER CERAMAX 6" x 12" Magnetic Chuck 1

1080 10" Diameter Magnetic Chuck 1

1081 6" x 9" Magnetic Chuck 1

1082 Lot-(1) Tailstock and (2) Rests 1

1083 Pair Tailstocks 1

1084 Pair Tailstocks 1

1085 ELECTRO ARC Mini Mag 1

1086 5" Vise Grinder Attachment 1

1087 K.O. LEE Grinder Attachment 1

1088 Lot-Assorted Dressers 1

1089 Lot-Assorted Dressers 1

1090 HARIG Step Tool Relief Grinding Fixture 1

1091 WELDON 200 End Mill Sharpening Fixture 1

1092 Spade Drill Regrinding Fixture 1

1093 DUMORE Tool Post Grinder with Extra Side Angle Motor 1

1094 DUMORE Tool Post Grinder 1

1095 DUMORE Tool Post Grinder 1

1095a Lot-(1) Variable Speed Controller and (1) Align Electric Power Drawbar 1

1096 Whirly Fixture 1

1097 Collet Fixture 1







1104 MICRO-GRIND Collet Fixture 1

1105 MICRO-GRIND Collet Fixture 1

1106 PHASE II 5C Collet Index 1

1107 SWISS PRECISION Profile Wheel Dresser 1

1108 LAST WORD Wheel Dresser 1

1109 Profile Wheel Dresser 1

1110 SUBURBAN MG5CVS1 Master Grind Fixture 1

1111 YUASA Radius Dresser 1

1112 LAST WORD Radius Dresser 1

1113 Radius Dresser 1

1114 Radius Dresser 1

1115 JACOBS 18N Chucks 3



1118 VALENITE VPB PC6-2015 Micro Holder 1

1119 BRIDGEPORT Boring Head 1

1120 PRECISE Jig Grinder Fixture (For Bridgeport) 1

1121 Lot-(9) Bridgeport Tool Holders in (1) Box 1






1127 Lot-(3) Assorted Boring Heads in (1) Box 1

1128 Lot-(4) Assorted Boring Heads in (1) Box 1

1129 Lot-Assorted Bridgeport Face Cutters in (1) Box 1

1130 Lot-(20) R8 Collets in (1) Box 1

1131 Lot-Assorted R8 Collets in (1) Box 1









1140 Lot-Tool Bits in (1) Box 1



1143 Lot-Collet Pushers in (1) Box 1

1144 Lot-Boring Bars in (1) Box 1

1145 Lot-(4) Assorted Tool Posts 1

1146 Lot-Tool Holders in (1) Box 1









of 28



1156 JACOBS 20N Chucks in (1) Box 5




1160 JACOBS No. 36 Chucks in (1) Box 3


1162 Lot-Assorted Chucks and Chuck Parts in (2) Boxes 1

1163 Lot-5C Collets in (1) Box 1








1171 80-Piece 5C Collet Set with Stand 1

1172 30-Piece 5C Collet Set with Stand and (1) 39-Hole 5C Collet Stand 1

1173 Shaping Bar Cutter Set 1

1174 RITEN Carbide Dead Centers in (1) Box 3

1175 Lot-(3) Dead Centers in (1) Box 1

1176 Lot-(3) Dead Centers in (1) Box 1

1177 Lot-Assorted Dead Centers in (1) Box 1



1180 Lot-Live Centers in (1) Box 1

1181 Lot-Assorted Centers in (4) Boxes on Floor Under (1) Bench 1

1182 Lot-(6) Assorted Centers in (1) Box 1











1193 Lot-Jaws in (2) Boxes 1

1194 Lot-Jaws on Floor Under (1) Bench 1

1195 Radii Cutter Set 1

1196 18" 4-Jaw Chuck 1

1197 16" 4-Jaw Chuck 1

1198 14" 4-Jaw Chuck 1

1199 12" 4-Jaw Chuck 1

1200 12" 3-Jaw Chuck 1

1201 12" 3-Jaw Chuck 1

1202 12" 3-Jaw Chuck 1

1203 10" 4-Jaw Chuck 1

1204 9" 4-Jaw Chuck 1

1205 9" 4-Jaw Chuck 1

1206 7 1/2" 3-Jaw Chuck 1

1207 Lot-Assorted Face Plates in (2) Stacks with (1) Steady Rest and (1) Collet Chuck 1

1208 Lot-(4) Assorted Newall Digital Readouts 1

1209 Lot-(1) Bridgeport Quill and (1) Bridgeport Right Angle Attachments 1

1210 SPEEDLINE Grinding Attachment 1

1211 Lot-Dawgs in (1) Bin Under (1) Table 1

1212 Lot-(8) Assorted Steel Surface Plates on (2) Pallets 1

1213 Lot-Grinder Machine Attachments Under (1) Table 1

1214 Lot-Assorted Tooling Under (1) Table 1

1215 WALKER 8" x 10" Demagnetizer 1

1216 D-MAG 8" x 14" Demagnetizer 1

1217 8" x 15" Demagnetizer 1

1218 Pratt & Whitney Diaform Wheel Forming Attachment with Stand, (Bay 2 West) 1

1222 Lot-Mann EDM Filters on (1) Pallet, (Crib Room) 1

1223 Lot-EDM Wire Spools and Misc. Tooling on (1) Section of Shelving, (Toolroom) 1

1224 GREENLEE 883-4, 1-1/4" thru 4" Portable Hydraulic Bender, (Pallet Not Included), (Bay 1 West) 1

1225 GREENLEE 6012 Super Tugger System, (Pallet Not Included), (Bay 1 West) 1

1226 GREENLEE 1818 Manual Offset Bender, (Bay 1 West) 1

1226a GREENLEE 1800 Manual Bender, (Bay 1 West) 1

1227 JOBOX Contractor Job Box, (Bay 1 West) 1

1228 BELLOWS-VALVAIR 15 HP Portable Hydraulic Unit, S/N N/A, (Building 2) 1

1228a TESTEK 15-HP Hydraulic Pump System, (Bay 1 West) 1

1228b SPERRY-VICKERS Hydraulic Pump System, HP N/A, (Bay 1 West) 1

1229 10-HP Portable Hydraulic Unit 1

1229a RACINE 5-HP Portable Hydraulic Unit, S/N N/A, (Building 2) 1

1230 Hydraulic Unit and Pump Motor on (1) Pallet with Danuvia Hydraulic Unit, (Bay 1 West) 1

1231 7.5 HP Portable Fluid Pump Mounted on Cart, (Building 2) 1

1232 DAYTON Portable Pump with Motor and Starter Box, (Bay 1 West) 1

of 28


1233 Portable Pump with 5-HP Motor, (Bay 1 West) 1

1234 DAYTON Portable Pump with 2-HP Motor, (Bay 1 West) 1

1235 Lot-Assorted Pumps on (1) Pallet, (Building 2) 1

1236 PARKER Portable Filtration Unit, (Bay 1 West) 1

1236a 72" Portable Center Check Fixture, (Bay 1 West) 1

1237 60" Center Checking Fixture with Stand, (Building 2) 1

1237a BROWN & SHARPE 36" Bench Center with Stand, (Bay 2 Center) 1

1238 Checking Fixture, (Building 2) 1

1239 BOSCH Belt Welding-Gluing System, (Building 2) 1

1240 No Identifying Name Transformer, (Building 2) 1

1241 MARCUS 1,000-KVA Transformer, (Building 2) 1

1242 MARCUS 300-KVA Transformer, (Building 2) 1

1243 OLSUN 112.5-KVA Transformer, (Building 2) 1

1244 DONGAN 112.5-KVA Transformer, (Building 2) 1

1245 DONGAN 75-KVA Transformer, (Building 2) 1

1246 REX 75-KVA Transformer, (Building 2) 1

1247 SQUARE D 45-KVA Transformer with Safety Switches, (Building 2) 1

1248 GENERAL SIGNAL 30-KVA Transformer, (Building 2) 1



1251 SQUARE D 15-KVA Transformer, (Building 2) 1


1253 Lot-(1) General Signal 3-KVA and (1) 1.5-KVA Transformers on (1) Pallet, (Building 2) 1

1255 MINUTEMAN 170, Walk-Behind Floor Scrubber with Charger, (Bay 1 East) 1

1256 MARKLIFT JR14 ELECTRIC SCISSOR LIFT, S/N 48612662, (Bay 1 East) 1

12572000 HOIST F180 18,000 LB LPG FORKLIFT, S/N 21708, Power Side Shifter, Power Fork Spreader, (Building

2)1

1258 HYSTER S155XL 15,500 LB LPG FORKLIFT, S/N B024D01967L, Power Side Shifter, (Building 2) 1

1259MITSUBISHI FGC25, 5,000 LB X 189" LIFT CAPACITY LPG FORKLIFT, S/N AF82A-51567, Power Side

Shifter, (Bay 1 East)1

1259aHYSTER S50XL, 5,200 LB X 189" LIFT CAPACITY LPG FORKLIFT, S/N A187V02428E, (Outside North Yard)

1

1260STEWART CUSTOM 3 Ton Free Standing Double Girder Top Running 6-Way Pendant Controlled Overhead

Bridge Crane System, (Toolroom)1

1261HERCULES 1-Ton Capacity 180-Degree Post Mounted Jib Crane with Dayton 1-Ton Electric Hoist, (Building 2)

1

1262STEWART 1-Ton Capacity 180-Degree Post Mounted Jib Crane with Coffing 1-Ton Electric Hoist, (CNC Room)

1

1263DEARBORN FABRICATING 1/2-Ton Capacity 180-Degree Post Mounted Jib Crane with CM 1/2-Ton Electric

Hoist, (CNC Room)1

1264ABELL-HOWE 1/2-Ton Capacity 360-Degree Free Standing Jib Crane with CM 1/2-Ton Electric Hoist, (CNC

Room)1

1265ABELL-HOWE 1/2-Ton Capacity 360-Degree Free Standing Jib Crane with Budgit 1/2-Ton Electric Hoist, (CNC

Room)1

1266ABELL-HOWE 1/2-Ton Capacity 360-Degree Free Standing Jib Crane with Coffing 1/2-Ton Electric Hoist, (CNC

Room)1

1267NO IDENTIFYING NAME 1/2-Ton Capacity 180-Degree Post Mounted Jib Crane with CM 1/2-Ton Electric

Hoist, (Bay 1 Crib Room)1

1268DEARBORN FABRICATING 1/4-Ton Capacity 180-Degree Post Mounted Jib Crane with CM 1/4-Ton Electric

Hoist, (CNC Room)1

1269NO IDENTIFYING NAME 1/4-Ton Capacity 360-Degree Free Standing Jib Crane with CM 1/4-Ton Electric

Hoist, (Bay 2 West)1

1270 CUSTOM 1-Ton Fixed Single Rail Crane with Jet 1-Ton Electric Hoist, (Inspection) 1

1270a 90" W x 84" H Maximum Clearance Portable Gantry Crane, (No Hoist), (Building 2) 1

1270b 90" W x 92" H Maximum Clearance Portable Gantry Crane, (No Hoist), (Building 2) 1

1270c 115" W x 94" H Maximum Clearance Portable Parts Hanger Rack, (Building 2) 1

1270d 115" W x 94" H Maximum Clearance Portable Parts Hanger Rack, (Building 2) 1

1271 CUSTOM 20-Ton Capacity Spreader Bar, (Outside North Yard) 1

1272 CADY 15-Ton Capacity Spreader Bar, (Outside North Yard) 1

1272a Spreader Bar, Capacity N/A, (Bay 1 East) 1

1273 Fork Lift Boom Attachment, (Outside North Yard) 1

1273a 72" W x 60" D Diamond Steel Dock Plate, (Outside North Yard) 1

1274 Lot-CM 1-Ton Electric Hoist, (Pallet Not Included), (Bay 1 Crib Room) 1

1274aLot-(1) CM 1-Ton, (1) CM 3/4-Ton and (1) CM 1/2-Ton Chainfall Hoists on (1) Pallet, (Pallet Not included), Bay

1 Crib Room)1

1275 Lot-Assorted Hoists and Parts in (2) Crate Baskets, (Bay 1 Crib Room) 1

1276 Pair 96" Fork Lift Extensions, (Bay 1 East) 1

1276a Pair 90" Fork Lift Extensions, (Bay 1 East) 1

1276b Pair 80" Fork Lift Extensions, (Bay 1 East) 1

1277 PORTA-WEIGH MSI-4300 50,000 Lb Digital Crane Scale, S/N 59919-75282, (Bay 1 East) 1

1278 ALLEGANY GM-60K 60,000 Lb Crane Scale, S/N 13482, (Bay 1 East) 1

1279 AEROGO Load Module Moving System, (Bay 1 West) 1

1280 Fork Lift Man-Lift Platform, (Bay 1 East) 1

1281 SKY HOOK 500-Lbs. Capacity Portable Jib Crane, (Bay 1 East) 1

1282Lot-(1) Approximately 750-Lbs. Capacity Mechanical Hand Crank Lift Cart and (1) Hand Crank Lift Table, (Bay 1

East)1

1283 VESTIL 3-Ton Capacity 24" x 36" Portable Lift Table, (Bay 1 East) 1

1284 Hydraulic Pallet Jack, (Bay 1 East) 1


of 28



1286a Hydraulic Pallet Jack, (Bay 1 East) 1

1286b Hydraulic Pallet Jack, (Bay 1 East) 1

1286c Hydraulic Pallet Jack, (Bay 1 East) 1

1287 Approximately 2,000-Lbs. Capacity Crane Stock Magnet, (Bay 1 East) 1




1291 Approximately 500-Lbs. Capacity Crane Stock Magnets, (Bay 1 East) 2

1292 15' 2-Hook Certified Chain Sling with (2) Chokers, (Bay 1 Middle) 1




1295a 10' 2-Hook Certified Chain Sling with (2) Chokers, (Bay 1 Middle) 1


1297 8' 3-Hook Certified Chain Sling, (Bay 1 Middle) 1



1300 6' 4-Hook Chain Sling, (Bay 1 Middle) 1

1301 4' 6" 4-Hook Certified Chain Sling, (Bay 1 Middle) 1









1310 5' 2-Hook Certified Chain Slings, (1) with (2) Chokers, (Bay 1 Middle) 5

1311 42" 2-Hook Chain Slings, (Bay 1 Middle) 4

1312 42" 2-Hook Chain Slings, (Bay 1 Middle) 5

1313 3' 6" 2-Hook Chain Slings, (Bay 1 Middle) 2

1314 4' 2-Hook Certified Chain Slings, (Bay 1 Middle) 3

1315 20' Single Hook Certified Chain Sling, (Bay 1 Middle) 1



1318Lot-(1) 6' with (2) Chokers, (1) 3' 2-Hook, 3' 3-Hook, 1' 6" 2-Hook, and (1) 5' Single Hook Chain Slings, (Bay 1

Middle)1

1319 Lot-(4) 4' and (1) 2' Chains with Hooks at Both Ends, (Bay 1 Middle) 1

1320 Lot-Misc. Chains and Hooks, (Bay 1 Middle) 1

1320a Lot-(1) DORNER 6" x 16' and (1) Dorner 12" x 96" Aluminum Belt Conveyors, (No Motors), (Bay 1 East) 1

1321 Lot-Assorted Eye Bolts in (11) Boxes, (Pallet Not Included), (Bay 1 West) 1

1322 Lot-Assorted Die Rings and Clevises on (1) Pallet, (Pallet Not Included), (Bay 1 West) 1

1324 Lot-Heavy Duty Extra Large Cloth Slings on (3) Hooks 1

1325 Lot-Large Cloth Slings in (2) Stacks 1

1326 Lot-Medium Cloth Slings in (1) Stack 1

1327 Lot-Small Cloth Slings in (2) Stacks 1

1328 Lot-Cable Slings, (2) Die Rings and Steel Mesh Material Sling 1

1329 HILMAN Approximately 10-Ton Roller Machine Skate Set, (Bay 1 East) 1

1330 ECOA Approximately 4-Ton Roller Machine Skate Set, (Bay 1 East) 1

1331 Pair Roller Machine Skates, (Bay 1 East) 1

1332 Pair Roller Machine Skates, (Bay 1 East) 1

1333 Lot-(2) Assorted Pairs of Roller Machine Skates, (Bay 1 East) 1

1333a Lot-Assorted Material Handling Components on Floor and (1) Pallet, (Bay 1 East) 1

1334 Lot-Consolidated and McGill Precision Bearings on (1) Cart, (Cart Not Included), (Bay 2 Middle) 1

1335 Lot-Timken Bearings on (1) Cart, (Cart Not Included), (Bay 2 Middle) 1

1336 Lot-NSK and SKF Bearings on (1) Cart, (Cart Not Included), (Bay 2 Middle) 1

1337 Lot-FAG and NTN Bearings on (1) Cart, (Cart Not Included), (Bay 2 Middle) 1

1338 Lot-Torrington, Fafnir and INI Bearings on (1) Cart, (Cart Not Included), (Bay 2 Middle) 1

1339 Lot-Assorted Misc. Bearings and Pillow Blocks on (1) Cart, (Cart Not Included), (Bay 2 Middle) 1

1340 Lot-Timken Bearings on (1) Pallet, (2) Crates, and (1) Box, (Pallet Not Included), (Bay 2 Middle) 1

1341 Lot-Timken Large Bearings and Racers on (1) Pallet, (Pallet Not Included), (Bay 2 Middle) 1

1342 Lot-Timken and NSK Large Bearings on (1) Pallet, (Pallet Not Included), (Bay 2 Middle) 1

1343 Lot-Stesta Large Bearings on (1) Pallet, (Pallet Not Included), (Bay 2 Middle) 1

1344 Lot-Assorted Bearings on (1) Pallet, (Pallet Not Included), (Bay 2 Middle) 1

1345 Lot-Assorted Bearings etc. on (1) Pallet and (1) Cart, (Pallet Not Included), (Bay 2 Middle) 1

1346 Lot-Oil Seals on (1) Cart, (Cart Not Included), (Bay 2 Middle) 1

1351 BINKS 10' x 15' OPEN FACE PAINT BOOTH, (Building 2) 1

1352 KAESER AS30 25 HP ROTARY SCREW AIR COMPRESSOR, S/N 325892, (CNC Compressor Room) 1

1354 KAESER 2K25 20 HP ROTARY SCREW AIR COMPRESSOR, S/N 262037, (CNC Compressor Room) 1

1356 KAESER NO 80200 REFRIGERATED AIR DRYER, S/N 023A-1-8603-020, (CNC Compressor Room) 1

1359 2008 FORD F-350 SUPER DUTY STAKE TRUCK, (Outside) 1

1360 HAULMARK TANDEM AXLE ENCLOSED UTILITY TRAILER, (Outside) 1

1361 20' L x 10' D x 9' H Mobile Office Trailer with Electrical Contents, (Outside South Yard) 1

1363MITUTOYO BRITE 241 CMM, S/N 8201101, 50" x 60" Drilled & Tapped Granite Surface Plate, RENISHAW

Probe, (Inspection)1

1364BROWN & SHARPE MICROVAL CMM, S/N 012481, 18" x 24" Drilled & Tapped Granite Surface Plate,

RENISHAW Probe, (Inspection)1

of 28


1365DEA IOTA 2203 CMM, S/N N/A, 54" x 87" Drilled & Tapped Granite Surface Plate, RENISHAW PH10M Probe,

(Building 2)1

1366 STI 14" OPTICAL COMPARATOR, (Building 2) 1

1367 STARRETT ALTISIMMO 36" DIGITAL HEIGHT GAGE, (Inspection) 1

1368 FOWLER TRIMOS TVD 1100 A, 36" Digital Height Gage, S/N 274, (Inspection) 1

1369 36 x 60" x 10" 4-Ledge Granite Surface Plate with Steel Stand 1

1370 36" x 48" x 8" 4-Ledge Granite Surface Plate with Steel Stand 1

1371 36" x 48" x 6 1/2" Granite Surface Plate with Steel Stand 1

1372 36" x 40" x 6 1/2" Granite Surface Plate with Steel Stand 1

1373 24" x 36" x 6" Granite Surface Plate with Steel Stand 1

1374 24" x 36" x 5 1/2" 2-Ledge Granite Surface Plate with Steel Stand 1

1375 24" x 24" x 4" Granite Surface Plate 1

1376 24" x 24" x 4" 2-Ledge Granite Surface Plate, (Pallet Not Included) 1

1377 20" x 30" x 5" 2-Ledge Granite Surface Plate with Steel Cart 1

1378 24" x 24" x 4 1/4" 4-Ledge Granite Surface Plate with Cart 1

1379 24" x 24" x 4" 2-Ledge Granite Surface Plate with Cabinet Stand 1

1379a Lot-(1) 12" x 18" x 4 1/4" and (1) 12" x 18" x 4" 2-Ledge Granite Surface Plates with Stand 1

1379b 18" x 24" x 3" Granite Surface Plate on (1) Pallet, (Pallet Not Included), (Inspection) 1

1380 84" Vertical Cylindrical Square 1




1383a Cylindrical Gage 1

1384 Tool Set Check Fixture with 16" Height Gage and Digital Read-Out with Cart 1

1385 NIKKEN Tool Set Fixture with 16" Dial Height Gage and Cart 1

1386 NIKKEN Tool Set Fixture with 16" Dial Height Gage, (Cart Not Included) 1

1386a MITUTOYO Precision Reference Bar with Case 1

1387 STARRETT-WEBER Gage High Precision Reference Bar with Case 1

1387a TOTO 81" Precision Surface Check 1

1387b Surface Check Level and Parallel Bar 1

1387c CHALLENGE 48" Parallel Bar 1

1388 MITUTOYO 6-7" to 11-12" Micrometer Set 1






1394 ETALON 4-5" to 7-8" Micrometer Set 1

1395 MITUTOYO 36-42" Micrometer, (Pallet Not Included) 1

1396 MITUTOYO 30-36" Micrometer, (Pallet Not Included 1

1397 MITUTOYO 30-36" Micrometer, (Pallet Not Included 1

1398 STARRETT 24-30" Micrometer, (Pallet Not Included) 1

1399 MITUTOYO 24-30" Micrometer, (Pallet Not Included) 1

1400 MITUTOYO 24-28" Micrometer, Pallet Not Included) 1

1401 MITUTOYO 16-20" Micrometer 1



1404 LUFKIN 13-14" Micrometer 1


1406 STARRETT 9-12" Micrometer 1

1407 Lot-(1) 12-18"and (1) 18-24" Micrometers with Standards 1

1408 Lot-(1) Starrett 15-16", (1) NSK 14-15" and (1) Mitutoyo 0-6" Micrometers 1

1409 MITUTOYO 11-Piece Micrometer Set 1

1410 MITUTOYO 5-Piece Micrometer Set 1

1411 Lot-Balance of Micrometers on (1) Pallet, (Pallet Not Included) 1

1412 Lot-(5) Assorted Micrometers and Inside Mic Set on (1) Pallet, (Pallet Not Included) 1

1413 Lot-(13) Assorted Small Micrometers 1

1414 Lot-(2) Mitutoyo and (2) SPI Digital Micrometers as a Set 1

1415 SPI 5-6" Digital Micrometer 1

1416 MITUTOYO 5-6" Digital Micrometers 2



1419 Lot-(1) Mitutoyo 0-1" and (1) 1-2" Digital Micrometers 1

1420 MITUTOYO 6-Piece Inside Micrometer Set 1

1421 MITUTOYO 6-Piece Inside Micrometer Set 1

1422 Lot-(1) Mitutoyo 5-Piece and (1) 6-Piece Mixed Set of Inside Micrometers 1

1423 Lot-(2) Assorted Inside Standard Micrometer Sets 1

1424 Digital Inside Micrometer Set 1

1425 Digital Inside Micrometer Set 1

1426 Lot-(2) Large Inside Micrometer Sets 1

1427 MITUTOYO Digital Depth Micrometer Set 1

1428 MITUTOYO Standard Depth Micrometer Set 1

1429 CSE 78" Vernier Caliper 1

1430 MITUTOYO 60" Vernier Caliper 1

1431 STARRETT 48" Vernier Caliper 1


1433 MITUTOYO 40" Vernier Caliper 1

1434 KANON 40" Vernier Caliper 1


of 28


1436 KANON 24" Vernier Calipers 2


1438 MITUTOYO 24" Vernier Calipers 2

1439 MITUTOYO 24" Vernier Calipers 2

1440 Lot-(6) Assorted Calipers 1

1441 MITUTOYO Bore Gage Set 1

1442 MITUTOYO Bore Gage Set 1

1443 Bore Gage Set 1

1444 SUNNEN Bore Gages 3

1445 SUNNEN Bore Gage Setting Fixtures 2

1446 BOICE Bore Gages 2

1447 STARRETT Bore Gage 1

1448 FEDERAL Bore Gages 2

1449 MITUTOYO Bore Gage 1

1450 STANDARD Bore Gage 1

1451 MITUTOYO Bore Gage 1

1452 MITUTOYO Bore Gages 4

1453 SUNNEN Bore Gages 5

1454 SUNNEN Bore Gage with Assorted Bore Pins and Fixture 1

1455 Lot-(3) Mitutoyo Bore Gage Partial Sets 1

1456 Lot-(5) Mitutoyo Bore Gage Partial Sets 1

1457 Lot-(6) Assorted Bore Gages 1

1458 Lot-(1) Chatillon 500-Lbs. and (1) Hanson 200-Lbs. Capacity Hanging Scales 1

1459 10" Bench Center 1

1460 STARRETT Model 199, 15" Precision Level 1

1461 STARRETT Model 98, 12" Precision Levels 2

1462 Lot-(1) Scherr Tumico 15" and (1) Fowler 6" Magnetic Combination Precision Square 1

1463 STARRETT Gage Block Set 2

1464 MITUTOYO Gage Block Sets 3

1465 MITUTOYO Gage Block Sets 1

1466 Lot-(3) Assorted Gage Block Sets 1

1467 Gage Block Sets 4







1474 Pin Gage Sets 3











1485 Lot-(2) Pin Gage Sets 1

1486 Lot-(4) Pin Gage Sets 1

1487 CONSOLIDATED 2,000 Ft Lbs. 1" Drive Torque Wrench 1

1488 Lot-(3) Assorted Snap-On Torque Wrenches 1

1489 Lot-(1) Armstrong and (2) Generic Torque Wrenches 1

1490 Lot-(3) Assorted Torque Wrenches 1

1491 TRIMOS 12" Height Master 1

1492 MITUTOYO 13" Height Master with Riser Block 1

1493 MITUTOYO 12" Height Master 1

1494 SHEFFIELD Shadow Graph 1

1495 SHEFFIELD Shadow Graph 1

1496 SOUTH BEND Height Gage 1

1497 Lot-Squares 1

1498 Lot-Small Force Indicator Gages 1

1499 Lot-Assorted Dial Indicators 1

1500 Lot-PIAB Vacuum Gages in (1) Box 1

1501 HOTO INSTRUMENTS ASKER Type-D, Super Ex Durometer 1

1502 MITUTOYO Digital Force Indicator Gages 2

1502a TENSITRON Precision Digital Tension Meters 2

1502b KJ LAW VERIMET M4900B, Digital Conductivity Meter 1

1503 Lot-(3) Diatest Ring Sets 1

1504 Lot-Assorted Inspection 1

1505 MITUTOYO 18" Dial Height Gage 1

1506 SPI 18" Dial Height Gage 1

1507 Lot-(5) Assorted Standard Height Gages 1

1508 Lot-(2) Cylindrical Gages, (2) Precision Parallel Sets and (1) Angle Degree Gage Set 1

1508a Lot-(7) Assorted Parallels Sets 1

1508bLot-V Blocks, Bench Center, Parallels and Master Ring Gage on (1) Pallet, (Pallet Not Included), (Inspection)

1

1509 Lot-(4) Assorted Pin Gage Sets with Parts 1

of 28


1510 Lot-(13) Small Pin Gage Sets on (1) Shelf 1

1511 Lot-Indicator Stand with Standard Force Gage, Brown & Sharpe 10" Riser Block and Hardness Test Plate 1

1512 Lot-(2) Long Gage Block Sets and (1) Square Master 1

1512a Lot-(10) Assorted Long Gage Blocks 1

1513 Lot-Precision Check Balls and Assorted Pin Gages with Indexes 1

1514 Lot-Assorted Inspection on (1) Stand with Tool Box, (Granite and Stand Not Included) 1

1514a Lot-Assorted Angle Plates on (1) Pallet, (Pallet Not Included) 1

1515 Lot-Assorted Angle Plates Under (1) Granite Plate 1

1516 Lot-Assorted Set-Up Blocks and Cube Under (1) Granite Plate 1

1516a Lot-Assorted V-Blocks on (1) Pallet, (Pallet Not Included) 1

1516b Lot-Assorted Large V-Blocks, Vise and T-Slotted Table, (Pallet Not Included) 1

1517 Lot-Assorted Ring Gages Under (1) Bench 1

1518 Lot-Assorted Go-NoGos and Plug Gages Under (1) Bench 1

1519 Lot-(2) Assorted Torque Multipliers Under (1) Bench 1

1520 Lot-Assorted Thread Gages in (1) Cabinet 1

1521 Lot-Assorted Thread Gages in (1) Cabinet 1

1522 HYDAC Accumulator Charging and Gaging Sets 6

1523 Lot-Assorted Test Meters 1

1524 Lot-Assorted Electronics 1

1525 Lot-Assorted Printers 1

1531 10-Drawer Tooling Cabinet with Hose Fittings Contents, (Partial), (Building 2) 1



1534 LYON 15-Drawer Tooling Cabinet with Springs Contents, (Partial), (Building 2) 1

1535 LYON 15-Drawer Tooling Cabinet with NPT Fittings, (Partial), (Building 2) 1

1536 LYON 15-Drawer Tooling Cabinet with O-Rings, Adaptors, Plugs, etc. Contents, (Partial), (Building 2) 1

1537 LYON 15-Drawer Tooling Cabinet with Hydraulic Fittings Contents, (Partial), (Building 2) 1

1538 LYON 15-Drawer Tooling Cabinet with Hose Fittings Contents, (Partial), (Building 2) 1

1539 LYON 15-Drawer Tooling Cabinet with JIC Fittings Contents, (Partial), (Building 2) 1

1540 6-Drawer Portable Tooling Cabinet with Hardware Contents, (Partial), (Building 2) 1

1541 7-Drawer Portable Tooling Cabinet with Hardware Contents, (Partial), (Building 2) 1

1542 LISTA 12-Drawer Tooling Cabinet, (Bay 2 Grinder Crib) 1



1545 10-Drawer Tooling Cabinet, (Bay 2 Grinder Crib) 1


1547 LYON 10-Drawer Tooling Cabinet, (Bay 2 Grinder Crib) 1




1551 EQUIPTO 18-Drawer Tooling Cabinet, (Bay 2 Grinder Crib) 1





1556 KENNEDY 9-Drawer Tooling Cabinet, (Bay 2 Grinder Crib) 1

1557 STANLEY 9-Drawer Wide Body Tooling Cabinet, (Bay 2 Grinder Crib) 1

1558 STANLEY 6-Drawer Wide Body Tooling Cabinet, (Bay 2 Grinder Crib) 1

1559 STANLEY 9-Drawer Tooling Cabinet, (Bay 2 Grinder Crib) 1

1560 STANLEY 7-Drawer Tooling Cabinet, (Bay 2 Grinder Crib) 1

1561 LYON 15-Drawer Tall Tooling Cabinet, (Bay 1 East) 1

1562 EQUIPTO 13-Drawer Tall Tooling Cabinet, (Bay 1 East) 1

1563 EQUIPTO 9-Drawer Tall Tooling Cabinet, (Bay 1 East) 1

1564 EQUIPTO 9-Drawer Tooling Cabinet, (Bay 1 East) 1

1565 6-Drawer Tall Tooling Cabinet, (Bay 1 East) 1



1568 10-Drawer Tooling Cabinet, (Bay 1 East) 1





1573 LYON 10-Drawer Tooling Cabinet, (Bay 1 East) 1




1577 STANLEY 6-Drawer Tooling Cabinet, (Bay 1 East) 1


1579 STOR-LOC 9-Drawer Tooling Cabinet, (Bay 1 East) 1











of 28










1598 EQUIPTO 6-Drawer Tooling Cabinet, (Bay 1 East) 1

1599 7-Drawer Tooling Cabinet Combination Shelving Unit, (Bay 1 East) 1

1600 4-Drawer Tooling Cabinet Combination Shelving Unit, (Bay 1 East) 1

1601 Lot-Bench with (1) 7-Drawer and (1) 6-Drawer Tooling Cabinets, (No Contents), (Bay 1 Start of Sale) 1

1602 Lot-Bench with (2) 6-Drawer Tooling Cabinets, (No Contents), (Bay 1 Start of Sale) 1

1608Lot-Contents of Shelving (Manufacturing Support Inventory) on (1) Mezzanine, (Shelving Not Included), (Bay 1

Parts Crib Mezzanine)1

1609 Lot-(2) Carts with Fittings Contents, (Under Mezzanine in Bay 1 Crib Room) 1

1610 Lot-(7) Sections of Shelving with Contents, (Under Mezzanine in Bay 1 Crib Room) 1

1611Lot-(5) Sections of Shelving with Contents & (1) Cabinet with Contents, (2) Desks and (1) Bench, (Under

Mezzanine in Bay 1 Crib Room)1

1612 TECHTOP IND 150-HP Motor, 3-PH 230/460 Volt, 1780 RPM, (Bay 1 Crib Room) 1

1613 TECHTOP IND 150-HP Motor, 3-PH 230/460 Volt, 1780 RPM, (Bay 1 Crib Room) 1

1614 NEMA 125-HP Motor, 3-PH 460 Volt, 1780 RPM, (Bay 1 Crib Room) 1

1615 TECHTOP IND 125-HP Motor, 415 Volt, 1460 RPM, (Bay 1 Crib Room) 1

1616 BALDOR 5-HP Motor, 3-PH 208-230/460 Volt, 1200 RPM, (Bay 1 Crib Room) 1

1617 VICKERS Hydraulic Vane Motors, 255 In. Lbs./100 PSI on (1) Pallet, (Bay 1 Crib Room) 6

1618 GENERAL SIGNAL 15-KVA Transformer, (Bay 1 Crib Room) 1

1619 DONGAN 10-KVA Transformer, (Bay 1 Crib Room) 1

1619a Lot-Pro Line Step Down Autotransformers, 480 Volt/277 Volt on (1) Pallet, (Bay 1 Crib Room) 1

1620 Lot-3-Phase Heavy Power Connector Drops on (1) Cart, (Bay 1 Crib Room) 1

1621 Lot-Pumps and Motors on (1) Pallet, (Bay 1 Crib Room) 1

1621a AIR SYSTEMS Vacuum Pump Motor with Case, (Bay 1 West) 1

1622 INSTAPAK Molding Foam Packing System on (1) Pallet, (Bay 1 Crib Room) 1

1623 INSTAPAK Molding Foam Packing System on (1) Pallet, (Bay 1 Crib Room) 1

1624 Four Pass Water Cooled Heat Exchanger, (Bay 1 Crib Room) 1

1625Lot-Reducer Hubs, Shafts, Stop Rings and Sleeves on (3) Pallets with Tooling in (1) Crate, (Bay 1 Crib Room)

1

1626 PARKER Series HMI, Hydraulic Cylinder, (Bay 1 Crib Room) 1

1626a PARKER Series 2A, Hydraulic Cylinder, (Bay 1 Crib Room) 1

1627 Lot-Hydraulic Fittings on (1) Pallet, (Bay 1 Crib Room) 1

1628 Lot-(11) Rolls 20' x 100' Plastic Sheeting on (1) Pallet, (Bay 1 Crib Room) 1

1629 Lot-(3) Spools of Air Hose, (Bay 1 Crib Room) 1

1630 Lot-Valves on (3) Carts with Carts and (4) Rexroth Servo Units in (1) Box, (Bay 1 Crib Room) 1

1631 REXROTH Axial Piston Variable Displacement Pump, (Bay 1 Crib Room) 1





1636 VICKERS Double Vane Pump, (Bay 1 Crib Room) 1

1637 REXROTH Proportional Valve with Fittings on (1) Pallet, (Bay 1 Crib Room) 1

1638 Spindle, (Bay 1 Crib Room) 1

1639 Lot-(2) Spindles on (1) Pallet, (Bay 1 Crib Room) 2

1640 SIEMENS Synchronous Servo Motors, 4.87 KW, (Bay 1 Crib Room) 2

1641 SIEMENS Synchronous Servo Motors, 3.77 KW, (Bay 1 Crib Room) 1

1642 Lot-Contents of (4) Sections of Racking, (Racking Not Included), (Bay 1 Crib Room) 1

1643Lot-(1) 10-Gallon, 3000 PSI and (2) 1-Gallon, 5000 PSI Bladder Accumulators in (2) Boxes, (Bay 1 Crib Room)

1

1644 Lot-Assorted Misc. on (5) Pallets and (1) Crate, (Bay 1 Crib Room) 1

1645 Lot-Driveshafts and Driveshaft Gears on (2) Pallets, (Bay 1 Crib Room) 1

1646 Lot-(4) Tie Rods on (1) Pallet, (Bay 1 Crib Room) 1

1647 Lot-Kop-Flex Waldron Couplings on (1) Pallet, (Bay 1 Crib Room) 1

1648 SAGINAW CONTROL Electrical Sub Panel on (1) Pallet, (Bay 1 Crib Room) 1

1649 Lot-Partition Work System Components on (1) Pallet, (Bay 1 Crib Room) 1

1650 Lot-Rag Safety Cans on (1) Pallet, (Pallet Not Included), (Bay 1 Crib Room) 1

1651 Lot-Assorted Colors Paint Spray Cans on (1) Shelf, (Bay 1 Crib Room) 1

1652 Lot-Banding Supplies etc. in (1) Crate Pallet, (Bay 1 Crib Room) 1

1653 Lot-Trash Cans and Clean Up Tools, (Bay 1 Center) 1

1655Lot-Contents of (17) Sections of Shelving with (1) Bin Rack on Mezzanine, (Shelving Not Included), (Building 2)

1

1656 Lot-Contents of (6) Pallets in (1) Row, (Building 2) 1






1662 Lot-Contents of (4) Pallets in (2) Rows, (Building 2) 1

1663 Lot-Machine Components on (5) Pallets in (2) Rows, (Building 2) 1

1664 Lot-Pumps and Motors on (2) Pallets in (1) Row, (Building 2) 1

1665 Lot-Spooled Wire on (1) Section Shelving, (Building 2) 1

of 28


1665aLot-Spooled Wire and Flex Conduit on (4) Racks and (3) Skids, with Wire Loom Machine, (Racks Included),

(Bay 1 East)1

1665b Lot-Electrical Hardware with (6) Sections of Shelving, (1) Cabinet and (1) Bench, (Bay 1 East) 1

1666 Lot-Spooled and Coiled Wire on (1) Mezzanine with Shelving, (Building 2) 1

1666a Lot-Assorted Fittings and Components with (5) Sections of Shelving, (Bay 1 East Cart Room) 1

1667 Lot-Assorted Fittings and Components with (2) Sections of Shelving, (Building 2) 1

1667a Lot-Assorted Fittings and Components with (7) Sections of Shelving, (Bay 1 East) 1

1667b Lot-Hydraulic Fittings with (12) Sections of Shelving, (Bay 1 East) 1

1667c Lot-Hardware, Fittings, etc. with (6) Carts, (Bay 1 East) 1

1668 Lot-G Duct Wireway, Electrical Hardware, etc. on (10) Pallets, (Building 2) 1

1669 Lot-Assorted Hose on (7) Pallets and (2) Stock Racks, (Racks Included), (Building 2) 1

1669a Lot-Assorted Hose with (2) Sections of Racking, (1) Cantilever Rack and (2) Tubs, (Bay 1 East Cart Room) 1

1670 Lot-Assorted Electrical Hardware, etc. with (1) Section of Shelving and (5) Cabinets, (Building 2) 1

1671Lot-Electrical Hardware with (4) Sections of Shelving, (2) Cabinets, (2) Bin Hole Racks and (1) Service Kit

Rack, (Building 2)1

1672Lot-Bolts, Nuts and Washers Hardware with (6) Sections of Bin Hole Racks, (Service Kit Racks Not Included),

(Building 2)1

1672aLot-Bolts, Nuts and Washers Hardware with (8) Sections of Bin Hole Racks, (Service Kit Racks Not Included),

(Bay 1 East)1

1672bLot-Bolts, Nuts and Washers Hardware with (11) Sections of Bin Hole Racks, (Service Kit Racks Not Included),

(Bay 1 East)1

1673Lot-Bolts, Nuts, Washers, Dowel Pins, etc. Hardware with (12) Sections of Bin Hole Racks, (Service Kit Racks

Not Included), (Building 2)1

1674 Lot-Bolts, Nuts, Washers, etc. Hardware with (2) Sections of Bin Hole Racks, (Building 2) 1

1675 Lot-Service Kits in (3) Stacks, (Building 2) 1

1675a Lot-Service Kits in (3) Stacks, (Bay 1 East) 1

1676 Lot-Service Kits in (4) Stacks and (1) Bin Hole Rack, (Building 2) 1

1677 Lot-Steel and Aluminum Stock with (5) Assorted Stock Racks, (Building 2) 1

1678 Lot-Steel Stock with (3) Racks and Stock on Floor, (Bay 2 East) 1

1679 Lot-Steel and Copper Stock with (4) Stock Racks, (Bay 1 Main Aisle) 1

1680 Lot-Steel Cut-Off Stock on Pallets in (5) Rows, (Bay 2 West) 1

1684Lot-Contents of Maintenance Room and Maintenance Storeroom, (No Fluorescent Tubes or Ceiling Tiles), (Bay

2 Middle)1

1685 2 1/2" x 6" x 8" Set-Up Blocks 12

1686 2 1/2" x 6" x 8" Set-Up Blocks 13

1687 2 1/2" x 5" x 11" Set-Up Blocks 13

1688 2" x 4" x 6" Set-Up Blocks 9

1689 2" x 4" x 6" Set-Up Blocks 8

1690 2" x 5" x 6" Set-Up Blocks 10

1691 2" x 4" x 6" Honeycomb Set-Up Blocks 12




1695 2 1/2" x 4 1/2" x 6" Set-Up Blocks 4


1697 2" x 5" x 7" Set-Up Blocks 8

1698 2 1/4" x 4" x 6" Set-Up Blocks 8

1699 2 1/2" x 4" x 7" Set-Up Blocks 6

1700 2" x 4" x 6" Set-Up Blocks 20

1701 2" x 4" x 6" Set-Up Blocks 17

1702 2" x 4" x 6" Set-Up Blocks 9

1703 2" x 4" x 6" Set-Up Blocks 13

1704 2" x 4" x 6" Set-Up Blocks 7

1705 2" x 4" x 6" Set-Up Blocks 7


1707 1 1/2" x 2 1/2" x 4" Set-Up Blocks 20

1708 Angled Set-Up Blocks 8

1709 Balance of Set-Up Blocks on (1) Pallet, (Pallet Not Included) 1

1710 Lot-Assorted Set-Up Blocks on (1) Pallet, (Pallet Not Included) 1

1711 Lot-Assorted Set-Up on (1) Pallet, (Pallet Not Included) 1




1715 Lot-Assorted Set-Up on (2) Pallets, (Pallets Not Included) 1

1716 Lot-Assorted Set-Up on (3) Pallets, (Pallets Not Included) 1

1717 Lot-Hold Down Tooling on (1) Pallet, (Pallet Not Included) 1

1718 Lot-Hold Down Tooling on (5) Carts and (1) Pallet, (Pallet Not Included) 1

1719 Taper Shank Drills 5




1723 Taper Shank Drills in (1) Box 6








of 28


















1747 Lot-(13) Taper Shank Drills in (1) Group 1



1750 Boxes of Taper Shank Drills 2



1753 Boxes of Taper and Straight Shank Drills 4


1755 Boxes of Taper and Straight Shank Drills 4

1756 Boxes of Straight Shank Drills 3











1767 Boxes of Center Drills 2

1768 Boxes of Center Drills 2

1769 Boxes of Reamers 5







1776 Boxes of T-Slot Cutters 2

1777 Boxes of T-Slot Cutters 2

1778 Boxes of Keyseat and Dovetail Cutters 2

1779 Box of Countersinks 1

1780 Boxes of Taps 3












1792 Boxes of Taps and Tap Extensions 2

1793 Mills in (1) Box 5

















of 28








1816 Boxes of Mills 2




















1836 Boxes of Single and Double End Mills 4

1837 Boxes of Double End Mills 4



1840 Boxes of Single and Double End Mills 4

1841 Boxes of Double End and Ball Nose Mills 4

1842 Boxes of Ball Nose Mills 4

1843 Boxes of Ball Nose Mills 4

1843a Boxes of Ball Nose Mills 4

1844 Roughing Mills in (1) Box 6







1850a Roughing Mills in (1) Box 9

1850b Roughing Mills in (1) Box 7







1857 Boxes of Roughing Mills 5








1865 Boxes of Carbide Mills 4



1868 Boxes of Counterbores 2



1871 Boxes of Counterbores and Holders 4

1872 Boxes of Milling Cutters 5



1875 Boxes of Face Mills 3



1878 Boxes of Boring Bars 4




1882 Boxes of Boring Bars, (3rd Box is Loose) 3




of 28





1889 Boxes of Boring Bars, (4th Box is Loose) 4





1894 Boxes of Insert Type Cutters 5




1898 Boxes of Carbide Inserts 4

1899 Boxes of Assorted Boring Bars, Arbors and Holders 8

1900 Boxes of Assorted Cutters 4



1903 Boxes of Tool Holders 3



1906 Boxes of Drill Extension Holders 2

1907 Lot-(7) Assorted Reamer Sets 1

1908 Lot-(5) Assorted Mill Sets 1

1909 Lot-Tap Extractor Sets and Gun Drills on (1) Pallet, (Pallet Not Included) 1

1910 Lot-Spade Drills on (1) Pallet, (Pallet Not Included) 1

1914 Sections of 96"W x 36"D x 120H" Pallet Racking, (CNC Room) 2

1915 Sections of 96"W x 36"D x 96"H Pallet Racking, (Bay 2 East) 3

1916 Sections of 10'W x 42"D x 16'H Pallet Racking, (Bay 1 Crib Room) 10

1917 Sections of 108"W x 36"D x 96"H Pallet Racking, (Building 2) 2

1918 Sections of 96"H x 48"D x 120"H Pallet Racking, (Building 2) 14

1919 Lot-Steel Welded Heavy Duty Racking, (Building 2) 1

1920 Lot-Shelving Components Under Canopy, (Outside) 1

1922 Lot-(14) Sections of Assorted Shelving on (1) Mezzanine, (No Contents), (Building 2) 1

1923Lot-(12) Sections of Assorted 36" Deep Heavy Duty Shelving on (1) Mezzanine, (No Contents), (Bay 1 Crib

Room)1

1924 Lot-(41) Sections of Assorted Light Duty Shelving on (1) Mezzanine, (No Contents), (Bay 1 Crib Room) 1

1926 Propane Tank Cages, (Outside) 4

1927 COMMERCIAL STRUCTURES 14' L x 8'D x 8'H Portable Shop Office with Furniture Contents, (Outside) 1

1928 10' W x 4' D x 9' H Outdoor Sheds, (Outside) 2

1929 Mezzanine Structure, (Bay 1 Crib Room) 1

1930 20' x 38' Mezzanine Structure, (Building 2 North) 1

1931 20' x 30' Mezzanine Structure, (Building 2 South) 1

1932 Tilt Top Portable Contractor Job Box, (Bay 1 East) 1

1933 2-Door Portable Contractor Job Box, (Bay 1 East) 1



1936 2-Door Portable Cabinet, (Bay 1 East) 1

1937 2-Door Supply Cabinets, (Bay 1 East) 4



1939a 2-Door Supply Cabinets, (Toolroom) 4

1940 Shop Desks, (Bay 1 East) 5

1941 Shop Desks, (Bay 1 East) 5

1942 Lot-Short Shop Cabinets with (1) Bench in (1) Row, (Bay 1 East) 1

1943 Lot-Assorted File Cabinets, Bookcases, Shelving and Cabinets in (1) Row, (Bay 1 East) 1

1944 Lot-(4) 2-Door Supply Cabinets and (1) Section Shelving with Contents, (Bay 1 West) 1

1944aLot-(6) Short 2-Door Cabinets, (1) Tall 2-Door Cabinet, (1) File Cabinet, (1) Single Door Cabinet, (1) Shelving

Unit and (1) Desk, (Bay 2 West Grinder Crib)1

1945 VESTIL Small Portable Dump Hopper 1

1946 Standard Dump Hoppers 11

1947 Large Dump Hoppers 11

1948 Tier Shelf Portable Stock Carts, (Bay 1 Cart Room) 12






1954 Tier Shelf Portable Stock Carts, (Building 2) 9




1958 Straight Shelf Type Portable Stock Carts, (Building 2) 7

1959 Straight Shelf Type Portable Stock Carts, (Bay 1 Cart Room) 9





1964 Heavy Duty 2-Shelf Portable Stock Carts, (Bay 1 Cart Room 8

1965 Small Portable Shop Carts, (Bay 1 Cart Room) 14

of 28


1966 Small Portable Shop Carts, (Bay 1 Cart Room) 24

1966a Lot-Assorted Misc. Small Carts, (Bay 1 Cart Room) 1

1967 Heavy Duty Rolling Steel Work Horses, (Outside South Yard) 18

1968 Heavy Duty Rolling Steel Work Horses, (Building 2) 21

1969 Pairs of Heavy Duty Steel Work Horses, (Building 2) 14

1970 Pairs of Heavy Duty Steel Work Horses, (Outside South Yard) 6

1970a Lot-Assorted Stock Stands, (Bay 1 Cart Room) 1

1971Lot-(4) Desks, (4) Benches, (2) 2-Door Supply Cabinets, (2) File Cabinets and Chairs, (Building 2 Under

Mezzanine)1

1972 Lot-(7) Benches, (2) File Cabinets and Chairs, (No Grinder Bench), (Building 2 Under Mezzanine) 1

1973 Lot-(6) Benches in (1) Row, (Bay 1 West) 1

1974 Lot-(5) Benches in (1) Row, (No Tooling Cabinet), (Bay 1 West) 1

1975 Lot-(5) Benches in (1) Row, (No Tooling Cabinet), (Bay 1 West) 1



1978 Lot-(10) Benches and (3) Desks, (Inspection) 1

1979 Lot-Wire, Shelving and Cabinets with Contents, Bay 1 West Store Room) 1

1980 Lot-(5) Welding Curtains, (Bay 2 West) 1

1981 2-Door Safety Cabinets with Contents, (Building 2 Paint Booth) 5

1982 Lot-(4) 2-Door Supply Cabinets, (2) Benches and (3) File Cabinets, (Building 2 Paint Booth) 1

1983 Lot-Rubber Floor Mats, (Building 2) 1

1984 Lot-Brooms, Shovels, etc. in (1) Tub, (Building 2) 1

1985 Lot-Chairs and Stools with (3) Tubs in (1) Row, (Building 2) 1

1986 Lot-Parts Bins in (2) Containers with (3) Hanger Racks in (1) Row, (Building 2) 1

1987 Horizontal Poly Holding Tanks, (Building 2) 2

1988 Lot-(8) Square Poly Holding Tanks, (Building 2) 1

1989 Green Tall Vertical Steel Holding Tanks, (Building 2) 2

1990 Blue Short Vertical Steel Holding Tank, (Building 2) 1

1991 Rittal Self Contained Room Temperature Controller on (1) Pallet, (Building 2) 1

1992 Lot-(3) Assorted Enclosures on Pallets, (Building 2) 1

1993 Lot-(2) Open Top Horizontal Box Type Oil Containers, (Bay 1 Cart Room) 1

2006 Lot-(3) Refrigerators and (16) Microwaves, (Cafeteria) 1

2007 Lot-Tables, Chairs and Displays, (Cafeteria) 1

2008Lot-(3) Tables with (6) Chairs, Plants, (1) Bookcase) and Wallprint in Reception Area and (2) Offices, (Front

Offices) 1

2009 GESTETNER DSC428, Fax Machine, Copier, (Front Offices) 1

2010 DESTROY IT 4001B Document Shredder, (Front Offices) 1

2011 HEWLETT PACKARD DESIGNJET 750C Plotter with Supplies, (Front Offices) 1

2012 GESTETNER DSC38 Printer, (Front Offices) 1

2013 QUARTET OVONICS 3100 Electronic Dry Erase Board Presentation System, (Front Offices) 1

2014 Desk with (3) Chairs in (1) Office, (Front Offices) 1

2015 6-Station Cubicle Partition Work System, (Front Offices) 1









2024 Lot-(3) Cabinets, (1) Desk, (1) Credenza and (5) Chairs in (1) Office, (Front Offices) 1

2025 Desk, (1) Table and (1) Cabinet in (1) Office, (No Contents), (Front Offices) 1

2026 Desk with (1) Table and (2) Chairs in (1) Office, (Front Offices) 1

2027 Rubbermaid 2-Door Supply Cabinet, (Front Offices Hallway) 1

2028 GESTETNER DSM635SP, Fax Machine Copier, (Front Offices 2nd Wing) 1

2029 CANON LASER CLASS 730i Fax Machine, (Front Offices 2nd Wing) 1

2030 HEWLETT PACKARD LASER JET 8000n and (1) HP Deskjet 5650 Printers, (Front Offices 2nd Wing) 1

2031 Desk with Cabinet and Bookcase in (1) Office, (Front Offices 2nd Wing) 1

2032 Desk with Chair in (1) Office, (Front Offices 2nd Wing) 1

2033 Desk with (2) Chairs in (1) Office, (Front Offices 2nd Wing) 1

2034 Desk with (1) Chair and Credenza in (1) Office, (Front Offices 2nd Wing) 1

2035 Lot-(4) Chairs, (1) Tables and Plants in Foyer, (Front Office 2nd Wing) 1

2036Lot-(1) Admiral Refrigerator, (1) Pelonis Water Dispenser, (1) Cuisinart Coffee Maker, (2) Microwaves and (2)

Toasters in Kitchen, (Front Offices 2nd Wing)1

2037Lot-Conference Table, (11) Chairs, (2) Cabinets, NEC VT670 Projector with Screen and Toshiba TV in

Conference Room, (Front Offices 2nd Wing)1

2038Lot-(1) 4-Section Bookcase, (2) Tables, (10) Chairs, (1) Bookcase and (1) 4-Door Cabinet in (3) Rooms, (Front

Offices 2nd Wing)1

2039 9-Station Cubicle Partition Work System with Extra Components, (Front Offices 2nd Wing) 1

2040 Lot-Assorted Office Supplies, (Front Offices) 1

2041 Lot-Computer Electronics in (1) Office, (Front Offices) 1

2042 Lot-Computer Components in (2) Cubicles, (Front Offices) 1

2043 HEWLETT PACKARD LASER JET 8100n Printer, (Bay 2, 2nd Floor Offices) 1

2044 XEROX 8830 Blueprint Copier, (Bay 2, 2nd Floor Offices) 1

2045 XEROX 7356 Blueprint Copier, (Bay 2, 2nd Floor Offices) 1

2046 Lot-Tables, Chairs, Monitors and Dry Erase Boards in (5) Rooms, (Bay 2, 2nd Floor Offices) 1

of 28

lot # description qty 1 lot-assorted hand tools on (1...

Documents