louvered shutterspage 1-2 - accent building products
TRANSCRIPT
Louvered Shutters ..............Page 1-2
Paneled Shutters.........................1-2
Board-N-Batten Shutters ................3
Shutter Accessories.......................3
Window Mantels ............................4
Door Surrounds..............................4
Sunburst Headers .......................4-5
Exterior Trim .................................5
Gable Vents....................................6
Stock Size - Cathedral Open Louvered ShuttersStandard style louver shutters have the traditional arched top and center rail.
Stock Size - Williamsburg Raised Panel ShuttersStandard style raised panel shutters have two equally sized raised panels.
Quarter Round Top
Size* Item #12”x25” L1-25-1212”x31” L1-31-1212”x36” L1-36-1212”x39” L1-39-1212”x43” L1-43-1212”x48” L1-48-1212”x52” L1-52-1212”x55” L1-55-1212”x60” L1-60-1212”x64” L1-64-1212”x67” L1-67-1212”x72” L1-72-1212”x75” L1-75-1212”x80” L1-80-12
Size* Item #15”x25” L1-25-1515”x31” L1-31-1515”x36” L1-36-1515”x39” L1-39-1515”x43” L1-43-1515”x48” L1-48-1515”x52” L1-52-1515”x55” L1-55-1515”x60” L1-60-1515”x64” L1-64-1515”x67” L1-67-1515”x72” L1-72-1515”x75” L1-75-1515”x80” L1-80-15
LouverCathedral TopCenter Mullion
Style: L1
Raised PanelTwo Equal Panels
Style: P2
Size* Item #12”x31” P2-31-1212”x35” P2-35-1212”x39” P2-39-1212”x43” P2-43-1212”x47” P2-47-1212”x51” P2-51-1212”x55” P2-55-1212”x59” P2-59-1212”x63” P2-63-1212”x67” P2-67-1212”x71” P2-71-1212”x75” P2-75-1212”x81” P2-81-12
Size* Item #15”x31” P2-31-1515”x35” P2-35-1515”x39” P2-39-1515”x43” P2-43-1515”x47” P2-47-1515”x51” P2-51-1515”x55” P2-55-1515”x59” P2-59-1515”x63” P2-63-1515”x67” P2-67-1515”x71” P2-71-1515”x75” P2-75-1515”x81” P2-81-15
*Sizes are nominal. 12” (actual 12”), 15” (actual 14-3/4”). Length is also nominal, meaning the length can be 3/4” less to 1/2” morethan the stated length. If you need an exact length you will need to order a custom size shutter, found on page 2.Available in 17 colors, including paintable units. Refer to enclosed samples. Easy-Lok fasteners included with each pair.
Available in 17 colors, including paintable units. Refer to enclosed samples.
*Sizes are nominal. 12” (actual 12”), 15” (actual 14-1/2”). Length is also nominal, meaning the length can be 3/4” less to 1/2” morethan the stated length. If you need an exact length you will need to order a custom size shutter, found on page 2.Available in 17 colors, including paintable units. Refer to enclosed samples. Easy-Lok fasteners included with each pair.
Louvered Design - 14-1/2” x 17”Fits all 15” stock size louver and 14-1/2” customsize louver shutters.Item #: 1310
Solid Design - 14-1/2” x 17”Fits all 15” stock size louver and 14-1/2” customsize louver shutters.Item #: 1311
Beveled Design - 14-3/4” x 14-3/4”Fits all 15” stock size panel shutters.Item #: 1301
Fanfold Design - 14-3/4” x 14-3/4”Fits all 15” stock size panel shutters.Item #: 1300
1 Shop www.apmdirect.com
LouverStraight TopAll Louver
LouverCathedral Top
All Louver
L5 L6
Exterior Vinyl AccentsCustom Sized Louvered Shutters
Custom Sized Panel Shutters
Lengths: Any length from 18” to 144” (In 1/4” increments)
Widths: 5-5/8”, 9-1/4”, 12”, 14-1/2”, 16-1/2”, 18”NOTE: Paint Ready will be 1/4” wider
Double Widths (Style L7): 20-1/4”, 25-1/2”, 29-1/2”, 31”
L1, L2, L3, L4, L5, L6, L7 Shutter Measurements
LouverStraight Top
Offset Mullion*
L4L1
LouverStraight Top
Center Mullion
LouverCathedral TopCenter Mullion
*Measurement from top of shutter to top of offset mullion is necessary.
Lengths: (In 1/4” increments)P1 - Any length from 18” to 55”P2, P3 - Any length from 22” to 110”P4, P5, P6 - Any length from 33” to 144”
Widths: 12”, 14-1/2”, 12”, 16-1/2”, 18”NOTE: Paint Ready will be 1/4” wider
Double Widths (Style P7): 20-1/4”, 25-1/2”, 29-1/2”, 31”
P1, P2, P3, P4, P5, P6, P7 Shutter Measurements
*Measurement from top of shutter to top of offset mullion is necessary.
L2
LouverDouble Width
L7
LouverCathedral TopOffset Mullion*
L3
2Phone Orders: 1-800-237-7470
PanelSingle Panel
P1
PanelTwo Equal
Panels
P2
PanelTwo Offset*
Panels
PanelThree Equal
Panels
PanelTwo Equal & One
Small Panel
PanelTwo Equal & OneSmall Top Panel
P3
PanelDouble Width
P7P4 P5 P6
Available in 19 colors, including paintable units. Refer to enclosed samples. Easy-Lok fasteners included with each pair.
Available in 19 colors, including paintable units. Refer to enclosed samples. Easy-Lok fasteners included with each pair.
3 Shop www.apmdirect.com
Louver/PanelCombo
Arch Top
LP1
Panel/LouverCombo
LP2
Custom Sized Louver / Panel Combination Shutters
Custom Sized Board-N-Batten Shutters
Shutter AccessoriesB1 B2
Joined Spaced
Lengths: Any length from 22” to 110” (In 1/4” increments)
Widths: 12”, 14-1/2”, 16-1/2”, 18” - Maximum panel length 50”
NOTE: Paint Ready will be 1/4” wider
LP1 and LP2 Combo Shutter Measurements
Lengths: Any length from 18” to 144” (In 1/4” increments)
(B2) Spaced Widths: 7-3/4” (2-board), 12” (3-board), 16-1/4” (4-board),20-1/2” (5-board) - Space between boards: 3/4”
(B1) Joined Widths: 7” (2-board), 10-1/2” (3-board), 14” (4-board),17-1/2” (5-board)
Note: Shutters 55” or longer will have 3 battens
B1 and B2 Shutter Measurements
• Adds an authentic colonial style appearance.• Textured finish simulates wrought iron.• Black matte finish only.• Bag contains: 2 “S” hooks (left & right), 4 hinges, and screws
for installation.
Item #: 139990
Decorative Hardware
(Note: Included with each pair of shutters at no charge)• Holds in any material: wood, aluminum, vinyl, stucco, hardboard,
or brick.• 3” long• Kit contains 12 screws.
Easy-Lok Vinyl Screws
Available in 19 colors, including paintable units. Refer to enclosed samples.Easy-Lok fasteners included with each pair.
Available in 19 colors, including paintable units. Refer to enclosed samples.Easy-Lok fasteners included with each pair.
4Phone Orders: 1-800-237-7470
Exterior Vinyl AccentsWindow Mantels
Door Surrounds
Window and Sunburst Header
• Each kit includes one keystone.• Use of keystone is optional.• Easily custom sized using optional keystone
to accommodate windows up to 140” wide withno face nailing or caulking necessary.
• Available in two standard heights: 6” and 9”
Sizes Item #
33-5/8” x 6” 672033B37-5/8” x 6” 672037B43-5/8” x 6” 672043B65-5/8” x 6” 672065B73-5/8” x 6” 672073B33-5/8” x 9” 674033B37-5/8” x 9” 674037B43-5/8” x 9” 674043B65-5/8” x 9” 674065B73-5/8” x 9” 674073B
Components Item #
Pilasters (pair) 674010BPHeaders available in Window Mantel section above.
• Surface Mount installs in minutes on any surface including brickor siding. No face nailing or caulking necessary.
• Decorative keystones add even more style. Can be used tocombine headers by concealing cuts and joining points.
Individual Components• Great for creating a custom sized door surround to fit any door size.
Especially helpful in creating a surround for wide doorways.• Each header includes one keystone. (Use is optional)• Headers available in Window Mantel section above.
Opening Width Item #36” x 69” 677036B70” x 106” 677069B
• Snap-On Finishing trim ring conceals all fasteners. It’s easy to install for newconstruction or remodeling and requires no face nailing or caulking.
• Surface Mount installs on any surface including brick or siding.
Available in 19 colors, including paintable units. Refer to enclosed samples.
Available in 19 colors, including paintable units. Refer to enclosed samples.
Available in 19 colors, including paintable units. Refer to enclosed samples.
5 Shop www.apmdirect.com
Gable and Window Sunburst Accent
Exterior Trim Molding
Same version for siding or surface mount. Can be used as siding version when installing siding oras surface mount on existing brick or siding.
Sunburst Size Width Height Item #30” Sunburst 30” 16.5” 67303033-5/8” Sunburst 33.6” 17.8” 67303337-5/8” Sunburst 37.6” 19.8” 67303765-5/8” Elliptical Sunburst 65.6” 14” 67306573-5/8” Elliptical Sunburst 73.6” 15” 673073
Scalloped Dentil Style
• Ideal for brick, vinyl, aluminum, or wood applications.• 8’ kit includes: (2) 4’ dentil profile strips, 8 screw covers and all necessary hardware.• 32’ kit includes: (8) 4’ dentil profile strips, 32 screw covers and all necessary hardware.• Corner Blocks eliminate difficult compound miters, ensures a custom fit with no gaps and installs
on any surface.
Dentil Style
Item Description Item #8’ Exterior Dentil Molding 65100832’ Exterior Dentil Molding 6510328’ Exterior Scalloped Dentil Molding 651008SC32’ Exterior Scalloped Dentil Molding 651032SCOutside Corner (each) 651000OCInside Corner (each) 65100ICEndcap Kit (pair) 651000EB
Available in 19 colors, including paintable units. Refer to enclosed samples.
Available in 19 colors, including paintable units. Refer to enclosed samples.
6Phone Orders: 1-800-237-7470
Exterior Vinyl AccentsGable Vents
• Double baffle system for increased weather resistance.• Sealed-in fiberglass screening for complete insect protection.• More venting area than industry standards.• Easy to install on all types of exteriors: wood, vinyl, aluminum,
stucco, hardboard or brick - new construction or remodeling.
Diamond HalfRounded
Triangle
Round
Item (w x h) Venting Area Item #18” Diameter Octagon 26 sq. in. 53102322” Diameter Octagon 54 sq. in. 53101027” Diameter Octagon 81 sq. in. 53101532” Diameter Octagon 110 sq. in. 53101618” Diameter Round 26 sq. in. 53105022” Diameter Round 50 sq. in. 53102036” Diameter Round 140 sq. in. 53102422” x 34” Half Round 100 sq. in. 53104014” x 22” Round Top 50 sq. in. 53103622” x 32” Round Top 70 sq. in. 53103812” x 18” Rectangular 36 sq. in. 53103018” x 24” Rectangular 140 sq. in. 531034
12” x 12” Square 44 sq. in. 53102518” x 24” Rectangular (Brick Mold Style) 63 sq. in. 53104724” x 30” Rectangular (Brick Mold Style) 97 sq. in. 531039
Standard Series
Signature Series
Available in 10 Styles
Item (w x h) Venting Area Pitch Item #74” x 14.5” Triangle 56 sq. in. 4/12 53141270.5” x 17” Triangle 74 sq. in. 5/12 53151272.5” x 18” Triangle 61 sq. in. 6/12 531043
70.5” x 20.5” Triangle 81 sq. in. 7/12 53171262.5” x 21” Triangle 69 sq. in. 8/12 53104462” x 23” Triangle 89 sq. in. 9/12 53191256” x 23” Triangle 77 sq. in. 10/12 53104556” x 26” Triangle 96 sq. in. 11/12 53111252” x 26” Triangle 88 sq. in. 12/12 53104634” x 17” Triangle 19 sq. in. 12/12 531212
32” x 47” Elongated Octagon 268 sq. in. N/A 53103326” x 38” Elongated Octagon 158 sq. in. N/A 531032
34” x 50” Steeple Vent 260 sq. in. 10/12 53102826” x 39” Steeple Vent 153 sq. in. 10/12 531029
35” x 42” Diamond 127 sq. in. N/A 53101940” Octagon 239 sq. in. N/A 531018
32” x 42” Rectangular 265 sq. in. N/A 531042Signature Series available in White and paint grade only.
Square
Available in 19 colors, including paintable units. Refer to enclosed samples.
Rectangle ElongatedOctagon
Octagon RoundTop
SteepleVent
P.O. Box 31046 Gettysburg Street
Arendtsville, PA 173031-800-237-7470
www.apmdirect.com
Colors
All exterior vinyl shutters and accent products are available in the colors shown on the colorsamples included with the mailing. The only exception is Cream and Light Grey, which are notavailable for the stock size louvered and paneled shutters.
Shipping
All APM Direct products must be shipped within the 48 continental United States. Products areshipped via FedEx or common carrier. Sales tax will only be applied if you reside in Pennsylvania.Lead Times: 7-12 business daysShipping Charge: FREE
Return Policies
If you are dissatisfied with the product(s) that you selected from APM Direct we will gladly refundyour purchase amount upon receiving the returned item(s) in sellable condition in the original cartonwith the following conditions:
All returned items must be shipped, freight prepaid, within 14 days of delivery to:
APM DIRECT46 Gettysburg St
Arendtsville, PA 17303Phone: 717-677-7308
A restocking fee may apply. See below:100% refund on one stock item, 30% restocking on additional stock items.100% refund on one custom size item only.
Damages
We make every effort possible to ensure that you receive your order without damage, however onoccasion there are conditions beyond our control that will cause damage during the shippingprocess. If the item(s) that you purchased become damaged during shipment please document thedamage with the freight company upon delivery and notify us immediately by calling 800-237-7470.
Specifications
Merchandise specifications are subject to change without notice.Typographic, photographic and/or descriptive errors are subject to correction.
Customer Service