low voltage electrical distribution pe90458 … · by a new masterpact nw device and its dedicated...
TRANSCRIPT
Make the most of your energy
Low Voltage Electrical DistributionSwitchboard modernisation
ECOFITTM
Upgrade your installation from Masterpact M to Masterpact NW and open the door to Energy Management
ECOFIT
PE
90458
Energyefficiencynow within your reach,
thanks to Plug & Play and Masterkit upgrade solutions
To counter rising energy
costs and cut greenhouse
gas emissions, we must
all find new ways to reduce
energy consumption.
Distributed energy metering
is a critical first step.
It will help you understand
exactly where, when,
and how much energy
is consumed throughout
your facilities, revealing
valuable opportunities
to improve your efficiency.
Buildings can achieve up to 30% energy savings with an Active Energy ManagementTM programme that includes an energy metering system!
The new Micrologic E, is the standard control unit for our upgrade
solutions, offering cost-effective protection and measurement features
to help you optimise your consumption.
The Micrologic P & H models deliver a higher level of information
including advanced protections and harmonics measurement.
NEW
PE
90456
PE
90457
If you need…
…our Plug&Playsolution is for you
Our Plug&Play solution lets you retrofit Masterpact M devices
with considerable reduction of on-site intervention time.
You conserve the existing Masterpact M chassis.
Busbar and cable connections are not disturbed, only the circuit
concerned needs to be isolated (for as little as 30 minutes*).
30minutes* and 2easy operations
11
The factory-modified and adapted «Plug and Play» Masterpact NW is designed for installation
in the original Masterpact M chassis. On-site upgrades are very simple:
Two new racks are
installed in place
of the original ones
in the Masterpact M
chassis.
1. Replacement
of original racks
All Masterpact NW
functions are pre-wired.
Our technician simply
connects the functions
required according
to the accessories fitted.
a fast and simple upgrade solution that keeps the original chassis
to cover current ratings from 800 up to 3200 A...and if you have limited access to your busbarsand cable connections
(*)Typical time for simple installations.
Masterpact M chassis
Masterpact NW
Masterpact M
PE
90451
PE
90452
PE
904512. Wire guide support
replacement
If you need…
Plug&Playsolution is for you … Masterkit
is your solution
With Masterkit, you have absolutely everything you need
to replace an old Masterpact M installation
by a new Masterpact NW device and its dedicated adaptation kit.
Masterkit lets you optimise the performance of your installation,
taking advantage of the advanced possibilities of Masterpact NW
with its monitoring and diagnostic functions.
2interchangeability throughout your entire installation
an installation-wide upgrade
to cover current ratings from 800 up to 6300A,fixed or drawout
standard, high extra-high breaking capacity in the most severe environments
Masterpact M chassis
Masterpact M
Masterpact NW
BUSBAR NOT MODIFIED
!
1 Extraction 2 Replacement
PE
90453
PE
90454
PE
90455
Thinking ahead
By upgrading Masterpact M using Plug&Play or Masterkit
solutions, you take an important first step toward higher
energy efficiency in a smart, safe and simple way.
And remember, Schneider Electric can help you go even
further to achieve maximum efficiency over your entire
installation.
We are the only global specialists in energy
management that provide an integrated approach
to help you meet your "efficiency targets".
30%Schneider Electric
can help deliver
up to 30%
energy savings
in industrial
and
commercial
buildings
Take your next step with
Schneider Electric
30%
All over the world
ECOFITTM
ECOFIT TM = tested, validated and certified by Schneider Electric
PE
90459
Schneider Electric nv/sa Dieweg 3
B-1180 Bruxelles/Brussel
Tél.: (02) 373 75 01 (FR)
Tél.: (02) 373 75 02 (NL)
Fax: (02) 373 40 02
www.schneider-electric.be
TVA/BTW: BE 0451.362.180
RPM Bruxelles/RPR Brussel
ING: 310-1110264-88
IBAN: BE 56 3101 1102 6488
SWIFT BIC: BBRU BE BB
Les produits décrits dans ce document peuvent être changés ou modi�és à
tout moment, soit d’un point de vue technique, soit selon leur exploitation ou
utilisation. Leur description ne peut en aucun cas être considérée comme
contractuelle.
De in dit document beschreven producten kunnen ten allen tijde veranderingen of wijzigingen ondergaan op technisch gebied dan wel op de manier waarop ze worden behandeld of gebruikt. Hun beschrijving kan geenszins contractueel worden beschouwd.
11/1132VP270EN