ls4 platform & scale combo - tal tectal-tec.co.za/_webmoduledata/documents/tt brochure...
TRANSCRIPT
LS4 Crate & Scale Combo
Brahman Neck Clamp
LS4 Platform & Scale Combo
LS4 Electronic Scale
Pallet weigher
INFO:Non-slip checker plate floor2.5mm steel sidesThe platform can be fitted into a crush, with gates at the front and
backDimensions: 2200 x 650 x 400mm (L x W x H)
Mass 85kg
���
�
Platform only - code 11110 Platform Scale combo - code 11310
Crate only - code 11150 Crate Scale combo - code 11320
INFO:Self-draining checker plate floorTapered, solid steel sidesOptional Sliding gates, Guillotine gates and Neck clamp.Dimensions: 2450 x 1100 x 2000mm (L x W x H) Mass 249kg
����
600mm bars - code 11040 1000mm bars - code 11050
INFO:Total capacity of scale - 2000kgHold functionDamper (for jumpy animals)Zero the mass of any platform or crateStatistics (Max, Min & Avg weight)Accuracy 1kg to a maximum of 2000kgRechargeable battery
�������
Code 11260
INFO:Weighing pallets1.2 x 1.2mUses the LS4 1000mm scale
(not included)
���
Painted - code 12010 Galvanised - code 12020
INFO:The Brahman neck clamp is suitable for cattle of all breeds and
sizesMaximum inside width between the doors: bottom 500mm; top 1m. Neck clamp is reversible (Left or Right hand operation) and can be
fixed on any crushSwingbar to restrict vertical head movement
�
��
�
CATTLE EQUIPMENT
Neck & Body Clamp Tollie(Calf) Tilt
Vet Clamp
INFO:The Neck & Body Clamp is 2.3m long and weighs 350kgNeck & Body Clamp is suitable for restraining cattle from 4months
and older as it is adjustableIdeal for head & neck inspections, de-horning, ear-tagging,
dosing, branding, injection, hoof trimming and castrating through side access gates and bars
Rear gate allows enough room to perform Artificial InseminationIn emergencies the body gate can be removed quickly so that a
collapsed animal can be rolled out of the clamp
��
�
��
Code 12110Code 12340
INFO:Suitable for calves aged up to 8 monthsIdeal for branding, de-horning and castratingAdjustable bottom width for smaller calvesDimensions: External 1840 x 1760 x 1550mm (L x H x W) 286kg
����
Vet Clamp - code 12140 Box Gate - code 12150
INFO:Ideal for embryo flushing, embryo transplanting, Artificial insemination
and semen collectionThe floor has a 12% gradient, as required by Veterinary Surgeons for
embryo transplanting and artificial inseminationConfiguration of the clamp makes pregnancy examination a simple task
even for the unskilled person
�
�
�
Left Hand Code - 12310 Right Hand Code - 12315
INFO:The animal can be tilted onto its sideIn the tilted position the floor can be opened for easy access to
the feetNylon webbing belts 4.5m x 100mm are used to strap the animal
to the tilt table Mass 443kg
��
�
CATTLE EQUIPMENT
Cattle Tilt
2
Ball float valve
Cattle Ring Feeder Cattle Self-Feeder
Cattle Water troughs
Hip Lifting Clamp
1.85m Feeder - code 13010 2.45m Feeder - code 13040
INFO:Ideal for feeding hay, grass and lucernThe construction forces the animal to eat with its head inside
the ring, avoiding spilt hayAll the rings come with a optional fibreglass binThe bin is made out of high quality fiberglassThe bin is cone shaped, so that the food moves out to the sides
and does not get stuck in the middle
��
���
1.4m Ring feeder - code 13160 2.3m Ring feeder - code 131201.4m Fiber bin - code 13180 2.3m Fiber bin - code 13130 INFO:
Ideal for feeding any type of grain mealThe hopper is filled from the top of the feeder and as the cattle
eat so the feed falls through into the troughAll self-feeders come with a 3-point tractor hitch for easy
transport while emptyCapacity: 1.85m - 750kg
2.45m - 1000kg
��
�
�
1.85m (150L) - code 14010 2.45m (200L) - code 14020 3.70m (300L) - code 14030
INFO:All water troughs are made from durable 1.6mm sheet metalOutside is coated with primer & olive green enamel top coatInside is coated with black epoxy tar which has exceptional
resistance to alkalis, mineral oils & sea waterThe cattle troughs have a 25mm inlet hole & drain plugRemovable float coverValve not included.
���
���
Lifting clamp - Code 12180 Block & Tackle - code 12200Tripod 3m - code 12190
INFO:Clamp to lift sick cows back to their feetThe clamp is secured around the hip bones of the cow, and
then using a block-and-tackle she is lifted to her feetIt’s used to lift the cow, not to keep it standing upright
��
�
Code 14820
INFO:�Ball Float valve - 20mm LP
CATTLE EQUIPMENT
3
Sorting gate15120
1000mm
18
50
mm
18
50
mm
15110
800mm
18
50
mm
Guillotine gate
15190
900mm
1950mm
Access gate15200
16
00
mm
3000mm
18
40
mm
Gated kraal side
15180
870mm
20
00
mm
630mm
Sliding gate 15250
2260mm
15
00
mm
Calf creep panel
48 x 2
32 x 2
15050
3000mm / 2350mm
16
00
mm
Kraal sides
All kraal sides come with 16mm connecting pin.
Info: * 3m Section, inside width 700mm, weighs 115kg.
1 x Circular Force Pen2 x Cattle Crush1 x Flapper Gate1 x Neck Clamp1 x 2-way Drafting Gate
Cattle Circular Force Pen Layout
Cattle Crush
Circular Force Pen
2-way Drafting Gate
Flapper Gate
15220
15270
15130
15010
CATTLE EQUIPMENT
4
Cattle Loading Ramps
Work & Load Trailer
Mobile Crush & Neck Clamp
Mobile Neck & Body
Code 17110
INFO:� fitted to the back of the crush�Unique Tal-Tec lift lower system�Stop and tail lights are fitted to a removable tail board�Can be fitted with electronic load cells to be a scale as well�Can also be used as a loading ramp, adjustable height 0.8m - 1.5m�Comes with a chevron & roadworthy certificate
Tal-Tec Neck Clamp fitted to the front of the crush and guillotine gate
Code 17050
INFO:��Used for branding, dosing, inoculation, AI, embryo transplants and all general veterinary procedures�Clamp allows access to whole body from hooves to head - through use of removable bars and panels�Can quickly be adjusted for bulls or calves�Comes with a chevron & roadworthy certificate
Restrains head and body of animal
TLR1 - code 17510 TLR2 - code 17520 TLR3 - code 17530 TLR4 - code 17540
INFO:3m long ramp. Adjustable height 0.8m - 1.5m.TLR1 - StaticTLR2 - Wheelbarrow wheels (shown in picture)TLR3 - Tractor speedTLR4 - Hi-Speed (chevron & roadworthy certificate)
�����
Code 17010
INFO:Tal-Tec Neck Clamp fitted to front of crush. Guillotine gate fitted to back
of the crush.Unique Tal-Tec lift lower system.Stop and tail lights are fitted to a removable tail board.Can be fitted with electronic load cells to be a Scale as well.Comes with a chevron & roadworthy certificate
�
����
CATTLE EQUIPMENT
5
Cattle Spray Race Calf Squeeze
Branding irons Immobilizer De-horning irons
Branding oven Prodder
Castrator
Complete - code 18010 No pump - code 18020 Frame & jets - code 18070
INFO:� feasible to prepare fresh dip at every dipping�Cattle can be dipped as often as a programme calls for, at minimum cost and using minimum labour for maximum results�The type of dip can be changed at will from one dipping to the next
Because of the small volume of dip required to operate a spray race, it is
Single - code 1900A 2-in-1 - code 19700 3-in-1 - code 19710 3-in-1 Fire Iron - code 19730
INFO:� everytime.�Irons are hand crafted from stainless steel.
The branding irons makes clean, clear brands
Code 12250
INFO:� from 1 to 10 weeks old.
Ideal restraint for de-horning and ear-tagging calves
De-horning iron - code 20050 Cadac calf de-budder - code 20010
INFO:� Tal-Tec branding oven or a gas torch.�The Cadac calf de-budder has a built-in gas torch.�This apparatus can be connected to any Cadac gas bottle.
The de-horning iron can be heated with the
Code 20100
INFO:� you clip on the lip and underneath the tail�The main electrical unit supplies one millisecond electrical impulses�Rechargeable battery
The Immobilizer has 2 clips, which
Code 19740
INFO:� gas bottle�Folds up neatly into a small suitcase�Can heat from 6 to 12 irons at a time�Irons are ready to brand within 3min
Includes all parts you need to brand, except the
Code 20210
INFO:��Uses 6 x Size ‘C’ batteries
800mm LongCode 20310
INFO:��475mm Long
Burdizzo - For castrating bulls
CATTLE EQUIPMENT
6
Sheep crate (Elec)
Sheep Lambing Pen
Sheep Mechanical crate
Crate - code 11530Scale - code 11040
INFO:Internal dimensions 1250mm x 500mm, mass 74kg.Butterfly doors have spring bolt latchesWhole crate is cranked onto its wheels when the
push handles are lifted
���
Crate only - Code 11510
INFO:Internal dimensions 1250mm x 500mm. Mass is 74kgButterfly doors have spring bolt latchesWhole crate is cranked onto its wheels when the push
handles are liftedWeighs 0 - 200kg in divisions of 500g and back-weighed to
compensate for the crateCan be used with LS4H or Mini Crane Scale
���
�
�
LS4H
Mini Crane Scale
Code 11080
INFO:Weighs 0 - 500kgElectronic hang type scaleCan also be used for weighing carcassesDamper (for jumping animals)Group and average weightmemory
���
�
�
Code 11520
INFO:Weighs 0-300kgUses 3x”AA” batteriesWeight don’t stabilize20mm LCD display screenWaterproof Panel
��
�
�
�
Consists of:
2 x Double Side with Gate - Code 166501 x Double Side with Plate - Code 166606 x TSK1 (1850 x 900mm) - Code 16500
���
SHEEP EQUIPMENT
7
Sheep Loading Ramp Sheep Mini Ramp
Horse Feeder
Sheep Tilt
Sheep Tilt Code - 16620 Ramp for Tilt Code - 16630
INFO:The tilt is used to clamp and turn a sheep or goat onto its backThe sheep or goats get tilted to the sideYou can work at a good height and not on the groundIdeal for inspection, dipping, dosing, clipping of hooves and artificial
inseminationThe ramp for the tilt comes as a
optional extraDimensions
Tilt 1,4m x 1,6m x 1,2m (LxHxW) Ramp 1,8m x 1.3m x 0.6m
����
�
�
(LxHxW)
Feeder - code 13210 Drinker - code 14210
INFO:Can also be used as a drinker.25L capacity. Drinker is fitted with aqua valve.
�
�
�
Piglet feeder Code 13760
INFO:1850 x 760 x 600 (L x H x W)Capacity of 250kgAdjustable feed outlet. Feed tray height is 235mm
���
Code 17610
INFO:Fully adjustable to a height of 4 metersSheep can be loaded onto a triple-deck truckTotal length of ramp 6.5 metersWheelbarrow wheels
����
Code 17650
INFO:2m longIdeal for loading onto a bakkie or small 1ton truck.Wheelbarrow wheels for easy movement around the farm.
���
Ramp
SHEEP EQUIPMENT
8
Sheep Self-feeder
Sheep Ring & Bin
Steel Drinker
Aqua valve
Fiber Drinker
Feed troughs
Code 13510
INFO:1.85m long with a capacity of 500kg. Feed tray height 300mmFeeds approximately 12 sheep simultaneouslyThe feeder has a solid roof with a good overhang to ensure that no rain
enters the feeding troughs
���
Sheep Water Troughs 924mm (23L) - code 14510 1.85m (46L) - code 14520
INFO:All water troughs are made from durable 1.6mm sheet metal.Coated with industrial primer & olive green enamel top coat. Inside
is coated with black epoxy tar.The sheep troughs have a 20mm inlet hole.Fixed valve cover. * Valve not included.
��
��
1.4m Ring - code 13520 1.4m Bin - code 13180
INFO:Diameter 1.4mHeight 770mmFeeds 21 sheep at a timeFiberglass bin
����
Valve - code 14810 Drinker - code 14560
INFO:Capacity of the steel drinker is 3.5LThe drinker is galvanised
��
Drinker only - code 14550
INFO:Capacity 3.5LUses the small aqua valveMade out of fiberglass
���
2.45m - code 13610 1.22m - code 13600
INFO:Dimensions 2450 x 300mm Half size is also available 1225 x 300
��
SHEEP EQUIPMENT
1850mm16
00m
m1200m
m
9
TSK3 Panel with gate
TSK4 Guillotine gate
0,56m
1,1
0m
TSK5 Sorting gate
All panels come with a 10mm steel connecting pin.
1,85m / 2,85m
0.9
0m
TSK125.4mm external pipe19.1mm internal pipe
16500
TSK2 Crush panel16520
16540
16530
16550
SHEEP EQUIPMENT
10
CATTLEMACHINES
LIVESTOCKEQUIPMENT
Manufactured by Tal-Tec7 Theuns Mulder Street, Brits, South AfricaP.O Box 995, Brits, 0250, South Africa
Tel no: +27 12 250 2188E-mail: [email protected]