lt-977 rb-md-923 tx3-nsl-8m instr rev 0
Upload: mircom-group-of-companies-largest-independent-fire-alarm-manufacturer-in-north-america
Post on 09-Mar-2016
216 views
DESCRIPTION
Figure 1: RB-MD-923 TX3-NSL-8M Board Replacement Remove the controller board by unscrewing the six screws which hold the board in place. Disconnect the two ribbon cables. Place the RB-MD-923 Replacement TX3-NSL-8M Controller board in its position and fasten the six screws to hold in place. Re-connect the two ribbon cables. Six mount- ing screws hold the board in place. NSL CABINET LT-977 Rev 0 September 2009 Ribbon cablesTRANSCRIPT
LT-977 Rev 0September 2009
Model RB-MD-923Replacement TX3-NSL-8M Board
Installation Instructions
RB-MD-923 MountingUnscrew the six screws that hold the existing board in place. Disconnect the two cables from top of the controller board. Replace with new board RB-MD-923, connect the two cables and use the six screws to mount the replacement board in place.
Figure 1: RB-MD-923 TX3-NSL-8M Board Replacement
TX3-NSL-8MNSL Unit
Remove the controller board
by unscrewing the six screws
which hold the board in
place. Disconnect the two
ribbon cables. Place the
RB-MD-923 Replacement
TX3-NSL-8M Controller board
in its position and fasten the
six screws to hold in place.
Re-connect the two ribbon
cables.
Six mount-
ing screws
hold the
board in
place.
Ribbon cables
NSL CABINET