luma strut · 4 pro-xl6 luma strut ssl north america, inc • 170 bobo trail, suite 303 • canton,...
TRANSCRIPT
2019Catalog
SSL North America, Inc. ‡ SSLNorthAmerica.com
LUMASTRUT
� SIMPLE – Mount Unistrut® and snap in LUMASTRUT.
� LOW COST - LUMASTRUT components are inexpensive. Installation is quick and easy.
� VERSATILE – Install anyplace you can mount Unistrut.
� FLEXIBLE CONFIGURATIONS – Run multiple LED modules from one driver. Use thermostat wire instead of high voltage conduit.
� POWERFUL – Up to 14,840 lumens; one 5000K 44” module.
™
Unistrut® is a registered trademark of Unistrut
LumaStrut Mount System Patent Pending
3SSL North America, Inc • 170 Bobo Trail, Suite 303 • Canton, GA 30114
[email protected] • (770) 880-2319 • sslnorthamerica.com
pro-xl6LUMASTRUT
overview
LED Modules. LUMASTRUT™ Mount & Diffuser Snapped into Unistrut®
End to End Connector
22”-LUMASTRUT on Unistrut
44 Inch LUMASTRUT Using Remote Drivers
Constant Current Drivers - 1 Channel
LUMASTRUT
Single channel drivers may typically be mounted to the top of the Unistrut above each LumaStrut LED module.
It is often easier install the drivers remotely from the Unistrut. Connection to the LumaStrut modules may be made with solid 18AWG thermostat wire, which saves on conduit and high voltage wire. Wire may be run directly to each module or multiconductor wire may be run to a “hub” enclosure near the modules and then individually to each module.
Voltage drop over long distances and electrical code must be taken into consideration. Other vendor’s drivers may be used. Contact us if you have questions.
driver selection criteria
LumaStrut Mount System Patent Pending
4
pro-xl6LUMASTRUT
SSL North America, Inc • 170 Bobo Trail, Suite 303 • Canton, GA [email protected] • (770) 880-2319 • sslnorthamerica.com
� Mini-Storage Units & Small Rooms� Retail Lighting Accents� Work Benches� Emergency Lighting� Indirect Lighting� New Construction Temporary Lighting� Up Lighting
Class 2 Drivers F120-0350N F120-0350D FUNV-0350D FUNVP-2400D AUNV4-1050D
AC Voltage 120 120 120-277 120-277 120-277
Max AC Wattage 15 15 15 96 at 2400mA 178
Driver Output Current 350mA 350mA 350mA Program=2100mA 1050A/Ch
Lumens/Module No Lens 1,518 1,518 1,518 1,518 x 6 (9,108) 1,518 x 12 (18,216)
Effi cacy (Lm/W) 187 187 187 187 187
Dimming None Triac 0-10V 0-10V 0-10V
Driver Output Channels 1 1 1 1 4
LED Modules/Driver 1 1 1 63 Parallel/2 Serial
124 Parallel/3 Serial
Built-In Battery Backup No No No Optional No
Specs subject to change. *4000K & No Diffuser (Diffuser=18% lumen loss) or (60 Degree Lens=12% lumen loss)
pro-xl6 specs by Driver option*
5 Year Warranty 24 LEDs
Max DC Voltage 26 @ 480mA
Max DC Amperage | Watts 480mA | 12 W
Reported L70 at 1050C >60k
LED Beam Angle 1200
Diffuser Lens (Option) 82% effi cient
600 Beam Angle Lens (Option) 88% effi cient
CCT(K) & CRI 4000/5000 & 80
Module Length x Width 5.5” x 1.26”
pro-xl6 Specifications
pro-xl6 application examplesAt just 5.5 inches in length, the LumaStrut PRO-XL6 is an ideal solution for any small area that needs lighting levels comparable to incandescent bulbs.
The use of multiple XL6 modules will provide very uniform lighting in larger rooms without a lot of overhead glare.
Numerous light modules may be run in parallel and/or serial so that large areas can get light from a single driver.
pro-xl6 overview
Multi-Channel Driver
5SSL North America, Inc • 170 Bobo Trail, Suite 303 • Canton, GA 30114
[email protected] • (770) 880-2319 • sslnorthamerica.com
pro-xl6LUMASTRUT
pro-22
� Low Bay Warehouse/Manufacturing� Mini-Storage Units & Store Rooms� Primary Retail Lighting� Emergency Lighting� Indirect Lighting or Up Lighting� New Construction Temporary Lights
Class 2 Drivers F120-0700N F120-0700D FUNV-0700D FUNV-1400D FUNVP-2400D
AC Voltage 120 120 120-277 120-277 120-277
Max AC Wattage 30 30 30 60 96 at 2400mA
Driver Output Current 700mA 700mA 700mA 1400mA Program=2100mA
Lumens/Module No Lens 4,418 4,418 4,418 4,418 x 2 (8,836) 4,418 x 3 (13,254)
Effi cacy (Lm/W) 180 180 180 180 180
Dimming None Triac 0-10V 0-10V 0-10V
Driver Output Channels 1 1 1 1 1
LED Modules/Driver 1 1 1 2 in Series 3 in Series
Built-In Battery Backup No No No No Optional
Specs subject to change. *4000K & No Diffuser (Diffuser=18% lumen loss) or (60 Degree Lens=12% lumen loss)
pro-22 specs by Driver option*
5 Year Warranty 60 LEDs
Max DC Voltage 39 @ 800mA
Max DC Amperage | Watts 800mA | 31W
Reported L70 at 1050C >60k
LED Beam Angle 1200
Diffuser Lens (Option) 82% effi cient
600 Beam Angle Lens (Option) 88% effi cient
CCT(K) & CRI 4000/5000 & 80
Module Length x Width 22” x 1.26”
pro-22 Specifications
pro-22 application examplesA perfect low wattage, high lumen light for general lighting applications.
Wiring multiple LED modules in series is an fast and effi cient way to light up large areas of a room.
Positioning the Unistrut such that the LumaStrut is directed upward or to the side is an excellent way to accent rooms with uplight or wall wash.
pro-22 overview
LUMASTRUT
Programmable Driver
6SSL North America, Inc • 170 Bobo Trail, Suite 303 • Canton, GA 30114
[email protected] • (770) 880-2319 • sslnorthamerica.com
pro-xl22
� Low Bay Warehouse/Manufacturing� Mini-Storage Units & Store Rooms� Primary Retail Lighting� Manufacturing Work Stations� Indirect Lighting or Up Lighting� New Construction Temporary Lights
Class 2 Drivers FUNV-1000D FUNVP-2400D AUNV4-1050D
AC Voltage 120-277 120-277 120-277
Max AC Wattage 40 96 at 2400mA 173
Driver Output Current 1000mA Program=2400mA 1050A/Ch
Lumens/Module No Lens 6,440 7,465 x 2 (14,930) 6,707 x 3 (20,121)
Effi cacy (Lm/W) 185 176 182
Dimming 0-10V 0-10V 0-10V
Driver Output Channels 1 1 3
LED Modules/Driver 1 2 in Series 3 in Parallel
Built-In Battery Backup No Optional No
Specs subject to change. *4000K & No Diffuser (Diffuser=18% lumen loss) or (60 Degree Lens=12% lumen loss)
pro-XL22 specs by Driver option*
5 Year Warranty 96 LEDs
Max DC Voltage 38 @ 1250mA
Max DC Amperage | Watts 1250mA | 49 W
Reported L70 at 1050C >60k
LED Beam Angle 1200
Diffuser Lens (Option) 82% effi cient
600 Beam Angle Lens (Option) 88% effi cient
CCT(K) & CRI 4000/5000 & 80
Module Length x Width 22” x 1.26”
pro-XL22 Specifications
pro-xl22 application examplesAt just 22 inches in length and with densely positioned LEDs, the LumaStrut PRO-XL22 can handle any typical low bay lighting application.
In a manufacturing environment, this LumaStrut model will flood work station areas with light without blinding glare.
Numerous light modules may be run in parallel and/or serial so that large areas can get light from a single driver.
pro-xl22 overview
LUMASTRUT
7SSL North America, Inc • 170 Bobo Trail, Suite 303 • Canton, GA 30114
[email protected] • (770) 880-2319 • sslnorthamerica.com
pro-xl6LUMASTRUT
pro-44
� High/Low Bay Warehouse/Manufacturing� Stairwells� Primary Retail Lighting� Auto Shop Bays & Mini-Storage� Offices & Work Shops� New Construction Temporary Lights
Class 2 Drivers FUNV-1400D UNVP-1400D
AC Voltage 120-277 120-277
Max AC Wattage 60 54 at 1400mA
Driver Output Current 1400mA Program=1400mA
Lumens/Module No Lens 8,656 8,656
Effi cacy (Lm/W) 174 174
Dimming 0-10V 0-10V
Driver Output Channels 1 1
LED Modules/Driver 1 1
Built-In Battery Backup No Optional
Specs subject to change. *4000K & No Diffuser (Diffuser=18% lumen loss) or (60 Degree Lens=12% lumen loss)
pro-44 specs by Driver option*5 Year Warranty 108 LEDs
Max DC Voltage 39 @ 1400mA
Max DC Amperage | Watts 1400mA | 55W
Reported L70 at 1050C >60k
LED Beam Angle 1200
Diffuser Lens (Option) 82% effi cient
600 Beam Angle Lens (Option) 88% effi cient
CCT(K) & CRI 4000/5000 & 80
Module Length x Width 44” x 1.26”
pro-44 Specifications
pro-44 application examplesComparable to multiple fluorescent or typical LED tubes, the PRO-44 is a small footprint, low wattage alternative.
Contols may be integrated using the 0-10V driver listed below. You may also use drivers from other vendors so long as they are electrically compatible with our LED modules. Contact us if you have any questions or specifi c needs.
pro-44 overview
LUMASTRUT
8SSL North America, Inc • 170 Bobo Trail, Suite 303 • Canton, GA 30114
[email protected] • (770) 880-2319 • sslnorthamerica.com
pro-xl44
� High Bay Warehouse/Manufacturing� Stairwells� Brightly Lit Retail Areas� Auto Shop Bays & Mini-Storage� Work Shops� New Construction Temporary Lights
Class 2 Drivers FUNV-2400D FUNVP-2400D
AC Voltage 120-277 120-277
Max AC Wattage 98 96 at 2400mA
Driver Output Current 2400mA Program=2400mA
Lumens/Module No Lens 14,699 14,699
Effi cacy (Lm/W) 172 172
Dimming 0-10V 0-10V
Driver Output Channels 1 1
LED Modules/Driver 1 1
Built-In Battery Backup No Optional
Specs subject to change. *4000K & No Diffuser (Diffuser=18% lumen loss) or (60 Degree Lens=12% lumen loss)
pro-XL44 specs by Driver option*5 Year Warranty 180 LEDs
Max DC Voltage 39 @ 2400mA
Max DC Amperage | Watts 2400mA | 94 W
Reported L70 at 1050C >60k
LED Beam Angle 1200
Diffuser Lens (Option) 82% effi cient
600 Beam Angle Lens (Option) 88% effi cient
CCT(K) & CRI 4000/5000 & 80
Module Length x Width 44” x 1.26”
pro-XL44 Specifications
pro-xl44 application examplesOne of the most cost effective solutions for high bay applications! LumaStrut XL44 modules can replace 400W to 1000W metal halides with appropriate placement. SSL North America can provide photometric studies for your facility to achieve your desired light levels and distribution. Easily place Unistrut wherever needed, snap in LumaStrut, wire and done. Controls may be added.
Use the 60 degree lens for high mounting applications or for higher aisle lighting purposes.
pro-xl44 overview
LUMASTRUT