luminario brokis
DESCRIPTION
lamparaTRANSCRIPT
-
1OFFICE:panielova 1315/25, Praha 6, 163 00IO: 64940799DI: CZ64940799
MUFFIN PC850 / WOOD 02
Table Lamp PC850 Components included with unit:
felt pad, cotton gloves, light source, glass shade, wooden lamp body
Installation Steps:
Switch off power at main circuit panel prior to installation!The manufacturer assumes no liability for damage resulting from incor-rect installation!
1. Assemble the lamp- Install the light source.- Insert the glass shade into the wooden lamp body.
2. Turn the power back on and check the functionality of the lamp.
SHOWROOM:Sdlit Jantejn 39, Horn Dubenky588 52 Czech Republic
Materials
Glass:The technological methods used in creating the lamp are based on several hundred years of traditional Czech handmade glass production. Respect for the material and its traditional production is characteristic for Brokis. Imperfections in the glass are the result of these technological methods and have no effect on the quality or functionality of the lamps.
Wood: wooden lamp body made of European oak (QUERCUS SPP)Wood is a natural material that reacts to changes in relative humidity levels and temperature in the surround-ing environment. When the relative humidity is extremely low (below 30%), the wood gradually dries out and cracks will appear. Therefore, we recommend maintaining relative humidity between 40-60% and a tempera-ture of 15 to 25 degrees Celsius.
CleaningThe lamp may be cleaned with common cleaning agents. Do not use solvents or abrasive cleaning agents, such as scouring powder.
Prior to shipping, the functionality of each lamp and its components is thoroughly tested. The manufacturer assumes no liability for the mishandling of products.
Technical support: [email protected]
y
x
w
z
w x y z 306 530 506 250
-
1OFFICE:panielova 1315/25, Praha 6, 163 00IO: 64940799DI: CZ64940799
SHOWROOM:Sdlit Jantejn 39, Horn Dubenky588 52
MUFFIN PC850 / WOOD 02Stoln svtidlo PC850
Komponenty, kter jsou soust balen:
svteln zdroj, filcov podloka, rukavice
Montn postup:
Ped mont vypnte pvod elektrickho proudu!Pi nedodren montnho nvodu vrobce neru za ppadn vznikl kody!
1. Do rovkov objmky naroubujte svteln zdroj a pot vsate sklennou st svtidla do devn montury.2. Zapnte pslun jisti a ovte funknost svtidla.
Materily
Sklo:Uit technologick postupy vychzej z nkolikasetlet tradice esk rukodln sklsk vroby. Tento respekt kmaterilu a jeho tradin vrob je pro firmu Brokis pznan. Ppadn nedokonalosti skla jsou zapinny zvolenmi technologickmi postupy a nemaj vliv na kvalitu a funknost svtidel.
Devo: montura zdubu evropskho (QUERCUS SPP)Devo je prodn materil, kter reaguje na zmny okolnho prosted zejmna vlhkosti a teploty. Pi extrmn nzk relativn vlhkosti vzduchu (pod 30 %) dochz k vysychn deva a nsledn tvorb trhlin. Proto doporuujeme udrovat relativn vlhkost vzduchu mezi 40 - 60 % a teplotu od 15 do 25 C.
itn Svtidlo je mon oetovat bnmi isticmi prostedky. Nepouvejte rozpoutdla a abrazivn istic prostedky /prky/.
U kadho svtidla vetn jeho komponent je ped expedic dkladn zkontrolovna funknost. Vrobce nenese odpovdnost za nesprvn zachzen sprodukty.
Technick podpora: [email protected]
y
x
w
z
w x y z 306 530 506 250
PC850_enPC850_cz