lux 06 gen2 - philipsimages.philips.com/.../odli20161006_001-upd-en_aa-lux-06-gen2.pdf · ø 19...
TRANSCRIPT
LUX 06 gen.2
SMALL SPOTLIGHTS
INDOOR
ILTI LUCE srl· Lungo Dora P. Colletta, 113/9· 10153 Torino (Italy); tel (39) 011 765 73 01; fax (39) 011 853855; www.iltiluce.com ; [email protected] MADE in ITALY_06 - 2016 (K)
(mm)
1,2 W IP40max
35˚
BLUX0101_17_AA
This luminaire contains
built-in LED lamps.
The lamps cannot be
changed in the luminaire.
O!set(m) Cone width (m) Illuminance(lx)
0,550,25 560
1,600,75 60
1,100,50 140
2,201,0 35
Warm White - wide beam (BLUX0101717WAA)
Caractéristiques Générales Allgemeine Informationen Informazioni generaliGeneral Information Caractéristiques Générales Allgemeine Informationen Informazioni generali
Material Matériaux Materialien Materiali
Number of light sources Nombre de Source(s) Anzahl Lichtquellen Numero sorgenti lum.
Fixing system Système de #xation Befestigungssystem Sistema di #ssaggio
Driver included Driver intégré Treiber inklusive Driver incluso
Protection class IEC Classe électrique Schutzklasse Classe di isolamento
IP code IP Schutzart Grado IP
IK code IK Schlagfestigkeit (IK) Grado IK
Optic type Optique Optik Ottica
Cable Câble Kabel Cavo
Dimmable Gradable Dimmbar Dimmerabile
European Community mark Marquage CE CE-Zeichen Marchio comunità europea
Lifetime to 80% luminous 'ux Durée vie 80% 'ux lumineux Lebensdauer bis 80% Lichtstrom Durata funzion. (80% 'usso)
Weight (kg) Poids (kg) Gewicht (kg) Peso (Kg)
Electrical Caractéristiques Electriques Elektrische Kenndaten Corrente
Input voltage Tension d' alimentation Netzspannung Tensione di alimentazione
Initial performances Performances initiales Performance iniziali
Initial input power Initial input power Systemleistung Potenza di sistema
Initial luminous 'ux Initial luminous 'ux Lichtstrom Flusso luminoso iniziale
Initial LED luminaire e*cacy Initial LED luminaire e*cacy E*zienz
Init. Corr. Color Temperature Init. Corr. Color Temperature Farbtemperatur Temperatura colore lampada
CRI IRC CRI CRI
Application conditions Condizioni applicazione
Ambient temperature range Température ambiante Umgebungstemperatur Temperatura ambiente
Anfängliche Leistung
EinsatzbedingungenConditions d'application
E*cienza luminosa iniziale
Aluminum
1 x LED
Nut - o-ring - spring
NO
III
IP40
/
WB / opal
1m
YES
CE
50 000 h
0,040 kg
350 mA
1,2 W
60 lm
50 lm/W
3000 - 4000 K
max.35 °C
BLUX0101717WAA
BLUX0101G17WAA
BLUX0101717NAA
BLUX0101G17NAA
ø 19
28
M15 nut two rubber o-rings spring
Fixing options:Opzioni di #ssaggio:
dado M15 due o-ring molla
90(3000K)/80(4000K)
Finiture:- ghiera frontale in alluminio anodizzato
Finishing:- anodized aluminium frontal ring
ø 19
SMALL SPOTLIGHTS
INDOOR
LUX 04/06 gen.2 ISTRUZIONI DI MONTAGGIO / INSTALLATION INSTRUCTIONS
(mm)
L= 1 mt (2x0,6 mm2 )
Ø 16
!ssaggio con o-ring!xing with o-ring
28
Black
junction box(not included)
Red
-
+
XX350mA
110-240V*
50~60Hz
BLUX0101_17_PCBLUX0101_17_AA
0,03
GE
NE
RA
LI /
GE
NE
RA
LS
MA
NU
TE
NZ
ION
E/
MA
INT
EN
AN
CE
Alimentatori/ LED Drivers
* Veri!care la tensione di ingresso supportata dagli alimentatori / Verify the input tension supported from drivers
Esempio di collegamento (connessione in serie)/Example of connection (serial connection)
max
35˚C1,2W IP40
-L'installazione deve essere fatta da personale quali!cato.
-Installation should be carried out by a suitable quali!ed installer.
-Togliere tensione prima di eseguire operazioni di manutenzione.
-Disconnect main voltage before maintenace operation.
-In caso di guasti, previa autorizzazione al reso di ILTI Luce, il prodotto non dovra essere nè aperto nè smontato.
-In case of failure, upon a return authorization of ILTI LUCE, the product will be not neither open nor dismounted.
-Tutte le operazioni di cablaggio e manutenzione vanno eseguite con l’interruttore generale in posizione OFF.
-All wiring and maintenance must be performed with the main switch in the OFF position.
si consiglia la conservazione delle seguenti istruzioni - we suggest you to keep this copy for your !les
MADE in ITALY_05 - 2016 (M)ILTI LUCE srl · Lungo Dora P. Colletta, 113/9· 10153 Torino (Italy); tel (39) 011 765 73 01; fax (39) 011 853855; www.iltiluce.com; [email protected]
max n°3 Lux spots 1,2W
WALIMLED03350
4W - 350mA
+ + +
N
L
+21
-
-- -
50/60 Hz110V-240V*
20m (40m tot.)
connessione in SERIEWALIMLED01350
WALIMLED08350
WALIMLED03350
WALIMLED12350
WALI/DIMM/JOLLY
WBOKVAR
Codice/Codenon inclusi/not included
Caratteristiche/Speci!cations
n. faretti/ n.spots
1,4W - 350mA
4W - 350mA
10W - 350mA
15W - 350mA
15W - 350mA
variatore/dimmer 1/10V
1
/
3
min 3-max 8
min 3-max 12
12 dimmable
Fissaggio con molle / Spring �xation
- Dare tensione all’impianto solo dopo aver collegato tutti i LED all’alimentatore.
- Connect the �tting to the power supply only after connecting all LED to the driver.
1-Forare con diametro 16To drill with a diameter of 16
Fissaggio con ghiera / Fixing with ring nut
1-Estrarre la mollaTo extract the spring
Ø 16
2-Comprimere le estremità della mollaTo press the end of spring
3-Inserire il faretto nel foroTo insert the spotlight in the hole
2-Inserire il faretto nel foroTo insert the spotlight in the hole
3-Avvitare la ghieraScrew the ring nut
CA
BL
AG
GIO
/ W
IRIN
G
min 3mm/max 15mm min 3mm/
max 15mm
Secondo la direttiva comunitaria WEEE (Waste Electrical and Electronic Equipment) l’apparecchio non può essere smaltito con i ri�uti indi"erenziati. Deve essere portato nelle strutture locali per lo smaltimento ed il riciclaggio dei prodotti elettronici.
In accordance with EU Directive WEEE (Waste Electrical and Electronic Equipment), luminaires must not be disposed of with other household waste. At the end of their life, luminaires must be taken to the appropriate local facility available for the disposal or recycling of electronic products.
SMALL SPOTLIGHTS
INDOOR
LUX 04/06 gen.2 ISTRUZIONI DI MONTAGGIO / INSTALLATION INSTRUCTIONS
SM
ALT
IME
NT
O /
DIS
PO
SA
L
si consiglia la conservazione delle seguenti istruzioni - we suggest you to keep this copy for your �les
MADE in ITALY_05 - 2016 (M)ILTI LUCE srl · Lungo Dora P. Colletta, 113/9· 10153 Torino (Italy); tel (39) 011 765 73 01; fax (39) 011 853855; www.iltiluce.com; [email protected]
LUX 06 gen.2 POLAR DIAGRAM
SMALL SPOTLIGHTS
INDOOR
ILTI LUCE srl· Lungo Dora P. Colletta, 113/9· 10153 Torino (Italy); tel (39) 011 765 73 01; fax (39) 011 853855; www.iltiluce.com ; [email protected] MADE in ITALY_06 - 2016 (K)
100
200
300
400
500
90°90°
180°
0° 30°30°
150°150°
60°
120°
60°
120°
cd / 1000 lm
C0 / C180
BLUX0101717WAA
tabella di riepilogo prodotti/ product overview table
codice/
code
colore/
colour
tipo/
type
potenza/
power
fascio ottico/
optic beam
ottica/
optictipo di LED/
LED type
materiale/
material
!ssaggio/
!xation
IP/
IP
BLUX0101717WAA warm whiteinterni/
indoor1,2W wide beam fissa/
fixed
alta emissione/
high emission
alluminio anodizzato/
anodized aluminummolla, dado, o-ring/
sptring, nut, o-ring40
BLUX0101G17WAA warm whiteinterni/
indoor1,2W opal fissa/
fixed
alta emissione/
high emission
molla, dado, o-ring/
sptring, nut, o-ring40
BLUX0101717NAAinterni/
indoor1,2W wide beam fissa/
fixed
alta emissione/
high emission
molla, dado, o-ring/
sptring, nut, o-ring40
BLUX0101G17NAAinterni/
indoor1,2W opal fissa/
fixed
alta emissione/
high emission
molla, dado, o-ring/
sptring, nut, o-ring40
alluminio anodizzato/
anodized aluminum
alluminio anodizzato/
anodized aluminum
alluminio anodizzato/
anodized aluminum
neutral white
neutral white