lw35029 manual
TRANSCRIPT
TAMIYA part C2 (reworked)
?4
MAKE
R15
R15 R24 (R25)
R24 (R25)
R3 R5
R2
R4
R6
R1
TAMIYA D12
R9
R16,TAMIYA B55, B56
Install TAMIYA partsD10 ,D2,D5, D9, B21, B37, B26, B34,B33, B38, B2, C23, C25, C13 in the cabin.
TAMIYA B11
LW 35029 WWW.LEADWARRIOR.COM [email protected] COPYRIGHT 2007
LEADWARRIORHISTORICAL MINIATURE Ebay: LEADWARRIOR
WWW.LEADWARRIOR.COM
LW 35029
STEYR Type 2000A
Austria’s all wheel drive Steyr 1500A was one of the many personnel/transport vehicles which was designed to meet Whermacht requirement for standard army 1,5 ton truck. Presented in 1941, the Steyr was used as troop transport in all the war theaters. A total of more than 20,000 were built, in a wide range of variants Tamiya presents basic and command versions. The chassis of Steyr 1500A and it’s reinforced variant Steyr 2000A were also used for Fire trucks, Omnibus (Leadwarrior kit Lw35026), Ambulance (Leadwarrior kit Lw35025), universal “Funk-Koffer”, and different types of cargo carriers. The initial variant of cargo truck on Steyr 1500A chassis had opened driver’s compartment combined with wooden trunk (Leadwarrior kit Lw35023). Later Steyr 2000A cargo trucks with full-metal cabin and reinforced rear springs were introduced, utilising standard frame shassis (Leadwarrior kit Lw35027), or long frame shassis (Leadwarrior kit Lw35024). That later variant had standard wheels base, but additional frame section was added to support longer flatbed cargo platform.
In second half of WWII, due to superiority of Allies in the air, Germany faced an urgent need in Self-Propelled Anti-Aircraft vehicles. Beside many official developments, utilizing panzers and halftraks chassis (see Leadwarrior kits Lw35014, Lw35022), there was a wide range of troop improvisations made by infantry units using all sort of vehicles and guns. This kit presents the conversion of Steyr 2000A long-frame cargo truck chassis to carry 2cm. Flak.38 AA Gun. The complete gun including the field carriage was mounted. This way the gun could be used in the static position, while the vehicle could be used for supply purposes.
(Later the official variant of this vehicle was introduced. It utilized the same Steyr 2000A chassis, but instead of 2cm. Flak.38 the 3cm. Flak.108/38 mounted on pedestal was used.)
2cm. Flak.38 AA Gun Carrier
LW 35029 3
LW 35029 WWW.LEADWARRIOR.COM [email protected] COPYRIGHT 2007
R13TAMIYASpare wheel
4
5
6
2cm. Flak.38 AA Gun(TAMIYA, DRAGON,TRISTAR or ITALERY)
CONVERSION KIT for
TAMIYA Steyr Type 1500A ( kit #35225 )
And Dragon / Italeri / Tristar / Tamiya Flak.38 AA Gun
49 RESIN PARTS
1
R19
R10
R10
R12
R12
R11R11
R20
LW 35029 1
LW 35029 WWW.LEADWARRIOR.COM [email protected] COPYRIGHT 2007
STUDY THE INSTRUCTION CAREFULLY BEFORE ASSEMBLING.
TEST FIT PARTS TOGETHER BEFORE CEMENTING.
USE CYANOACRYLATE GLUE FOR RESIN PARTS.
2MAKE
?
Cut / Remove part
Optional
Repeat several times
Repeat on mirror side
R24 R25
R22
R22
R23
R21
R27
R10
R11
R12
R13
R14
R15R16
R17 R18
R10
R11
R12
R13
R14
R15R16
R17 R18
R26
R19
R20
R28
R29
R1
R2
R3
R4
R5
R6
R7 R8R9
LW 35029 2
LW 35029 WWW.LEADWARRIOR.COM [email protected] COPYRIGHT 2007
TAMIYA part A3
R26
TAMIYA B27
R27
TAMIYA parts B50, B49, B46, B532
TAMIYA partA10 (reworked)
R23
R22
TAMIYA B39 (B54)
3?
R20R21
R14
Bench position is optional:
R21
R14
R19
R20
R29
R29
R28
R17
R18
R18
R17
R7
R8
R8