lysaghtspandekdec2013

8/12/2019 LysaghtSpandekDec2013

1/6

L Y S A G H T S P A N D E K

1

SPANDEK DESIGN & INSTALLATION GUIDE


2/6

Y AGH

AND

K

Lysaght Spandek

700 mm cover

24 mm

Underlap Overlap BMT kg/m kg/m2 m2/tZINCALUME steel 0.42 3.26 4.66 215COLORBOND steel 0.42 3.32 4.74 211ZINCALUME steel 0.48 3.70 5.29 189COLORBOND steel 0.48 3.76 5.37 186

(mm)Masses

LYSAGHT SPANDEK is a contemporary-looking, trapezoidal profile which is ideal where a stronger, bolder,more modern corrugated appearance is required.

SPANDEK was originally designed as a strong attractive roofing material for industrial and commercialconstruction - however SPANDEK has proved equally popular for homes and public buildings, underlining

its versatility and pleasing appearance. SPANDEK combines strength with lightness, rigidity and economy.

Material specifications Next gene ati n ZINCALUME aluminium/zinc/

magnesium all c ate steel c mplies wit AS1397:2011G550, AM125 (550 MPa minimum iel st ess, 125 g/m 2 minimum c ating mass)

CoLorboNd is p epainte steel f exte i ngan walling. It is t e m st wi el use . T e paintingc mplies wit AS/NZS 2728:2013 an t e steel ase isan aluminium/zinc all -c ate steel c mpl ing wit AS1397:2011. Minimum iel st engt s a e G550 (550MPa),

G300 (300MPa) epen ing n p file. Minimumc ating mass is AM100 (100g/m 2 )

CoLorboNd METALLIC is p epainte steel f supe iaest etic qualities ispla ing a metallic s een.

CoLorboNd

ULTrA is p epainte steel f seve ec astal in ust ial envi nments (gene all wit in a ut100-200 met es f t e s u ce). T e painting c mplies witAS/NZS 2728:2013 an t e steel ase is an aluminium/zinc all -c ate steel c mpl ing wit AS 1397:2011.Minimum c ating mass is AM150 (150g/m 2 )

CoLorboNd Stainless is a p e-painte steel an is usef seve e an c astal envi nments. T e painting c mplieswit AS/NZS 2728:2013 an t e steel ase is a stainlesssteel c mpl ing wit AISI/ASTM T pe 430; UNS N .S43000.

ColoursSPANdEk is availa le in an att active ange f c l u s inCoLorboNd fact p e-painte steel an in unpainteZINCALUME aluminium/zinc/magnesium all c atesteel.

Stan a CoLorboNd steel is availa le in a full ange fc ntemp a c l u s suita le f all uil ing p jects.

COLORBOND steel with THERMATECH technology ThErMATECh s la eflectance tec n l g is n w inclu ein t e stan a CoLorboNd steel palette. CoLorboNd steel wit ThErMATECh tec n l g eflects m e f t esuns eat, all wing t fs an uil ings sta c lein summe . In m e ate t t climates, c mpa e t

fing mate ials f simila c l u wit l w s la eflectance,CoLorboNd steel wit ThErMATECh can e uce annualc ling an ene g c nsumpti n up t 20%.

Lengths S eets a e supplie cust m cut.

Tolerances

Lengt : + 0mm, 15mm,Wi t : + 4mm, 4mm

Maximum Support SpacingsT e maximum ec mmen e supp t spacings a e ase

n testing in acc ance wit AS1562.1-1992, AS4040.1-1992 an AS4040.2-1992.

r f spans c nsi e t esistance t win p essu e anlig t f t affic (t affic a ising f m inci ental maintenance).Wall spans c nsi e esistance t win p essu e nl .

T e p essu e c nsi e e is ase n uil ings up t 10mig in regi n b, Te ain Categ 3, Ms=0.85, M i=1.0,

Mt=1.0 wit t e f ll wing assumpti ns ma e:

Roofs:Cpi=+0.20, C pe =-0.90, k l=2.0 f single an en spans,k l=1.5 f inte nal spans.

Walls:Cpi=+0.20, C pe =-0.65, k l=2.0 f single spans, k l=1.5 finte nal spans.

T ese spacings ma va se vicea ilit an st engt limitstates f pa ticula p jects.


3/6


3

Maximum roof lengths for drainagemeasured from ridge to gutter (m)Penet ati ns will alte t e w f wate n a f.F assistance in esign f fs wit penet ati ns,please see a vice f m u inf mati n line.

As wit an l w sl pe f, pa ticula ca e must eta en w en setting t e supp ts t p event p n ing.F f sl pes wn t 2 , a num e f p visi nsan etails will nee t e a e e t . Please call

u nea est Se vice Cent e f a vice.

Limit states wind pressuresSPANdEk e s t e full ene ts f t e latest met s fm elling win p essu es. T e Win P essu e capacitta le is ete mine full scale tests c n ucte atblueSc pe L sag ts NATA- egiste e testing la at ,using t e i ect p essu e-testing ig.

Testing was c n ucte in acc ance wit AS 1562.1:1992design an Installati n f S eet r f an Wall Cla ingMetal, an AS 4040.2:1992 resistance t Win P essu e fN n-c cl nic regi ns.

T e p essu e capacities f se vice-a ilit a e ase na e ecti n limit f (span/120) + (maximum fastenepitc /30).

T e p essu e capacities f st engt ave een ete mine testing t e cla ing t failu e (ultimate capacit ). T ese

p essu es a e applica le w en t e cla ing is xe t aminimum f 1.0mm, G550 steel.

F mate ial less t an 1.0mm t ic , see a vice f m uinf mati n line.

Safety, storage and handlinghan ling Safet - LySAGhT p uct ma e s a p an

eav .

It is ec mmen e t at eav - ut cut esistant gl ves anapp p iate manual an ling tec niques a lifting plan euse w en an ling mate ial.

keep t e p uct an clea f t e g un . If stac e un le p uct ec mes wet, sepa ate it, wipe it wit a

clean cl t t t ug l .

LYSAGHT SPANDEK: Limit State wind pressure capacities (kPa)

E S

I S

E S Sing le s

Spacing denitionsES = End spanIS = Internal spanO = Overhang

I S

O

O

Step

97

65

49

39

32

24

19


4/6

Y AGH

AND

K

Installation

Laying procedureF maximum weat e -tig tness, sta t la ing s eets f mt e en f t e uil ing t at will e in t e lee f t e w st-anticipate p evailing weat e .

It is muc easie an safe t tu n s eets n t e g un t an upn t e f.

bef e lifting s eets n t t e f, c ec t at t e a e t ec ect wa up an t e ve lapping si e is t wa s t e e ge ft e f f m w ic installati n will sta t.

Place un les f s eets ve nea fi m supp ts, n t at mispan f f mem e s.

Fastening sheets to supports

SPANdEk is pie ce-fixe t tim e steel supp ts. T ismeans t at fastene sc ews pass t ug t e s eeting.

y u can place sc ews f SPANdEk t ug t e c ests in t evalle s. T maximise wate tig tness, alwa s place f sc ewst ug t e c ests. F walling, u ma use eit e c est- valle -fixing.

Alwa s ive t e sc ews pe pen icula t t e s eeting, an int e cent e f t e c ugati n i .

d nt place fastene s less t an 25mm f m t e en s f s eets.

Prevailing weather Direction of laying

Sheet 1Sheet 2Sheet 3

Walking on roofs

Alwa s wal n nea t e afte s. Gene all , eep uweig t evenl ist i ute ve t e s les f t feet t av ic ncent ating u weig t n eit e eels t es. Alwa s weasm t s ft-s le s es; av i i e s les t at pic up an

l small st nes, swa f an t e jects

Adverse conditions

If t is p uct is t e use in ma ine, seve e in ust ial, unusuall c sive envi nments, as f a vice f m uinf mati n line.

Metal & timber compatibility Lea , c ppe , a e steel an g een s me c emicall -t eatetim e s a e n t c mpati le wit t is p uct; t us nt all wan c ntact f t e p uct wit t se mate ials, n isc a ge

f ainwate f m t em nt t e p uct. If t e e a e u tsa ut t e c mpati ilit f p ucts eing use , as f a vicef m u inf mati n line.

Cutting

F cutting t in metal n site, we ec mmen a ci culasaw wit a metal-cutting la e ecause it p uces fewe

amaging t metal pa ticles an leaves less esultant ut an a ca un um isc.

Cut mate ials ve t e g un an n t ve t e mate ials.

Sweep all metallic swa f an t e e is f m f a eas angutte s at t e en f eac a an at t e c mpleti n f t einstallati n. Failu e t s can lea t su face staining w ent e metal pa ticles ust.

han le mate ials ca efull t av i amage: nt agmate ials ve ug su faces eac t e ; nt ag t ls

ve mate ial; p tect f m swa f.

Maintenanceoptimum p uct life will e ac ieve if all exte nal su facesa e was e egula l . A eas n t cleane natu al ainfall(suc as t e t ps f walls s elte e eaves) s ul ewas e wn eve six m nt s.

Sheet-ends on low slopesW en SPANdEk is lai n sl pes f 5 eg ees less, cut act e c ne f t e un e -s eet, at t e wn ill en f t e s eet,t l c capilla acti n.

Non-cyclonic areasT e inf mati n in t is c u e is suita le f use nl in a easw e e a t pical c cl ne is unli el t ccu as efine in AS1170.2:2011.

F inf mati n n t e use f LySAGhT p ucts in c cl nicc n iti ns, efe t t e C cl nic A ea design Manual w icis availa le inging Steel di ect n 1800 641 417 n uwe site: www.l sag t.c m.


4


5/6


5

S

S

Crest: 3 fasteners

Crest: 4 fasteners

Valley: 3 fasteners

Valley: 4 fasteners

Fasteners per sheet per support. Most common practice is: 3 fasteners for internal spans and 4 fasteners for single and end spans.S = Side-lap

Valley xing for walls only

Fix to Steel Fix to Steel Fix to Steel Fix to Timber Fix to Timber Single & lapped steel thickness Single thickness steel Total lapped thickness of Hardwood So wood 0.55 up to 1.0mm BMT 1.0mm BMT up to 3.0mm BMT 1.0mm BMT up to 3.8mm BMT J1-J3 J4

Crest RoofZips M6-11x50 12-14x45, Metal Teks HG, HH 12-14x45, Metal Teks HG, HH 12-11x65, Type 17 HG, HH 12-11x65, Type 17 HG, HHFixed or or or AutoTeks M5.5-14x50 AutoTeks M5.5-14x50 RoofZips M6-11x65

10-16x16, Metal Teks, HH 10-16x16, Metal Teks, HH 10-16x16, Metal Teks, HH 10-12x25, Type 17, HH 10-12x30, Type 17, HHPan or or M5-16x25 Designer Head M5-16x25 Designer HeadFixed M5-16x25 Designer Head M5-16x25 Designer Head or 12-11x25, Type 17, HH or 12-11x25, Type 17, HH or RoofZips M6-11x25 RoofZips M6-11x25

Side laps (If required) 10-16x16, Metal Teks, HH or Roof Zips M6-11x25 or M5-16x25 Designer Head or Sealed blind rivet 4.8mm aluminium

Fasteners without Insulation

Notes: 1] For other steel thicknesses not specied please seek advice from screw manufacturer.2] Values given are: gauge/threads per inch/ lengths (mm). HH = Hex. Head, WH = Wafer Head, HG = Hi-Grip3] Care is required during installation to prevent stripping of thin material. (Single ply.)4] Screw specication as above or equivalent fastener.

5] All screws with EPDM sealing washer.

Side-lapsT e e ge f SPANdEk wit t e anti-capilla g ve isalwa s t e un e lap (see figu es n t is page an npage 2). It is gene all c nsi e e g p actice t usefastene s al ng si e-laps weve , w en cla ing issupp te as in icate in Maximum Supp t Spacings,si e-lap fastene s a e n t usuall nee e f st engt .

End lappingEn -laps a e n t usuall necessa ecause SPANdEk isavaila le in l ng lengt s.

If u want en -laps, see a vice f m u inf mati nline n t e sequence f la ing an t e am unt f ve lap.

Ends of sheetsIt is usual t all w f s eets t ve lap int gutte s

a ut 50mm. Please efe t t e LySAGhT r fing& Walling Installati n Manual f t e app p iate ent eatment f t e s eets.

Sealed joints

F seale j ints use sc ews ivets an neut al-cu e silic ne sealant an e as suita le f use witgalvanise ZINCALUME steel.

Approx. 5mmCut back corner and rib

Approx.

5mm


6/6

Y AGH

AND

K

Product Descriptions

All esc ipti ns, speci cati ns, illust ati ns, awings,ata, imensi ns an weig ts c ntaine in t is catal gue,

all tec nical lite atu e an we sites c ntaining inf mati nf m LySAGhT a e app ximati ns nl .

T e a e inten e L sag t t e a gene al esc ipti nf inf mati n an i enti cati n pu p ses an n tc eate a sale esc ipti n. L sag t ese ves t e ig t at

an time t :(a) suppl G s wit suc min m i cati ns f m its

awings an speci cati ns as it sees t; an

( ) alte speci cati ns s wn in its p m ti nal lite atu et e ect c anges ma e a e t e ate f sucpu licati n.

Disclaimer, warranties and limitation of liability

T is pu licati n is inten e t e an ai f all t a esan p fessi nals inv lve wit specif ing an installingLySAGhT p ucts an n t t e a su stitute fp fessi nal ju gement.

Te ms an c n iti ns f sale availa le at l cal L sag t salesffices.

Except t t e extent t w ic lia ilit ma n t lawfulle exclu e limite , blueSc pe Steel Limite will n te un e incu an lia ilit t u f an i ect

in i ect l ss amage (inclu ing, wit ut limitati n,c nsequential l ss amage suc as l ss f p fit anticipate p fit, l ss f use, amage t g will anl ss ue t ela ) weve cause (inclu ing, wit utlimitati n, eac f c nt act, negligence an / eac fstatute), w ic u ma suffe incu in c nnecti n witt is pu licati n.

C p ig t blueSc pe Steel Limite 2 decem e , 2013

www.lysaght.comTechnical enquiries: [email protected]

or call 1800 641417LySAGhT , SPANdEk , ThErMATECh , CoLorboNd & ZINCALUME a e egiste e t a ema s f blueSc pe Steel Limite , AbN 16 000 011 058.r fZips is a egiste e t a ema f ITW buil ex. T e LySAGhT ange fp ucts is exclusivel ma e f blueSc pe Steel Limite t a ing as L sag t.digital d wnl a 2/12/13

9 3 2 0 0 7 5 0 7 4 8 3 8

lysaghtspandekdec2013

Documents