m-7125, m-7250 enhanced biopharmaceutical microfluidizer® … · 2020-01-03 · s data...
TRANSCRIPT
M-7125, M-7250 Enhanced BioPharmaceutical Microfluidizer® Processor
M-7125 and M-7250 Enhanced BioPharmaceutical Microfluidizer Processor Provides Superior Results For Pilot and Production Environments Recommended for non-sterile processing
Nano-emulsions (with and without API)
Nano-dispersions
Microencapsulation
Deagglomeration
Cell disruption
Key benefits: Guaranteed scale up from lab and pilot Microfluidizer processors
Easy to operate with simple manual controls
Easy to maintain with most maintenance points easily accessed
Highly secure batch records, 21 CFR Part 11 compliant
CIP process with no equipment takedown
Thermally sensitive materials processed safely
More efficient processing, usually requiring fewer passes than other processing machinery
Batch to batch process reproducibility assured
Key features Up to 15 lpm @ 690 bar (4.0
gpm @ 10,000 psi) product flow rates
7.5 lpm @ 1,379 bar (2.0 gpm @ 20,000 psi) product flow rates
5.1 lpm @ 2,068 bar (1.3 gpm @ 30,000 psi) product flow rates
Low product holdup volume (<1 liter)
Small batch capable (minimum 12 liters)
All product paths are sanitary grade and BPE compliant
Complete package unit including motor starter panel and process interlocks
Ultra Clean In Place (UCIP) using supplied feed pump or your CIP system pump
All instruments and valves are sanitary grade, BPE compliant
On board data acquisition for complete batch record audit trail
On board flow meter to measure product and CIP flow rates
PID control of process chilled water for product temperature management
Factory Acceptance Testing (FAT)
Complete document turn over package for validation support including IQ/OQ, material certification and calibrations
On site start-up assistance, operator and maintenance training, SAT and IQ/OQ execution by our technical staff
TB-BP7.E-3
125 d M 7250 E h d
Model show
n is subject to change depending on options selected. CP m
odel depicted.
Since 1984, Microfluidics has provided life sciences and formulation scientists with critical tools used in the development and production of pharmaceutical formulations and recombinant technologies. High shear fluid processing, Microfluidics’ proprietary technology, uniformly reduces droplet and particle size to enable the production of stable nano-emulsions, nano-suspensions, liposomes and the nano-encapsulation of actives. In addition it offers the most efficient method for disruption of yeast, E.coli, plant and mammalian cells.
Discovery to CommercializationAs a result of recent advances in high throughput screening and drug discovery, many new chemical compounds have been identified as possible drug candidates. Unfortunately, many of these compounds show poor water solubility and often are only marginally soluble in oil-based solvents. The ultrahigh shear force developed by Microfluidizer processors solves this problem by reducing the particle size of active pharmaceutical ingredients to therapeutically relevant sizes that enables the production of drug products with improved bioavailability and stability.
Cell Disruption for Biotechnology From the gentle disruption of cultured cells for virus isolation to the challenging disruption of yeast and other fungi, Microfluidics offers technologies to meet the variable and demanding needs for cell membrane disruption. This technology provides exacting process control for highly reproducible and efficient cell breakage while keeping temperatures under precise control to prevent denaturing.
Getting To Full ProductionResults obtained on all laboratory units will scale up easily and in a linear manner to production volumes when the same operating conditions are employed. Enhanced Microfluidizer processors include Ultra Clean In Place (UCIP) eliminating the need for disassembly and Clean Out of Place (COP). Data recording and validation support documentation including IQ/OQ is included to ensure your ability to comply with 21CFR part 11 guidelines.
Specifications
M-7125 M-7250Pressure Range up to 689, 1379, or 2068 bar (10,000, 20,000 or 30,000 psi)
Product Flow Rate* up to 7.56 lpm (2.0 gpm) up to 15.12 lpm (4.0 gpm)
Product Feed Temperature Range
-10ºC to 75ºC (14ºF to 165ºF)
Power Requirement 18.6 kw (25 HP) 37.3 kw (50 HP)
Utility Requirements
requires 0.65 m3/min @ 6.2 bar (23 scfm @ 90 psi) minimum with -37ºC to -18ºC (-35ºF to 0ºF) dew point
Dimensions** W x D x H 236 x 142 x 201 cm (93” x 56” x 79”)
Weight with oil** 816 kg (1,850 lbs) 1,089 kg (2,400 lbs)
*based on water **all weights and dimensions are approximate
Enhanced BioPharm Package Includes
Validatable under 21 CFR for cGMP Turnover documentation package for validation Installation Qualification / Operational Qualification (IQ/OQ ) documentation Installation Qualification / Operational Qualification (IQ/OQ ) execution Startup and training Stainless steel construction Product wetted surfaces finish to 0.5µm (20 Ra) nominal, electropolished and passivated Manual controls Feed pump, pharmaceutical grade CE compliant Interaction chamber selected for your application Factory Acceptance Testing (FAT) / Site Acceptance Testing (SAT) Motor starter panel Ultra-Clean-In-Place (UCIP) Product heat exchanger - Pharma grade with active product temperature control, double
tube sheet style Mass flow meter - Pharma grade Data acquisition and recorder system, Yokogawa DX200P; 21 CFR Part 11 compliant for
electronic signature and record keeping Proprietary high pressure diaphragm priming valve Process pressure and temperature sensing
Available Options
Product inlet strainer Hydraulic oil Explosion proof (XP) compliant version available ATEX compliant version available
Data acquisition and recorder system, Industrial Personal Computer (IPC); 21 CFR Part 11 compliant for electronic signature and record keeping
For more information, please contact:
analytik (UK and Ireland Distributor)2 Cygnus Business Park, Middle Watch, Swavesey, Cambridge, CB24 4AA T: +44 (0)1954 232 776 E: [email protected] W: analytik.co.uk