m10rdi intel atom mini itx motherboard with intel ich10r...

M10RDI Intel Atom Mini ITX Motherboard with Intel ICH10R Chipset User’s Manual 1st Ed – 11 January 2013

M10

FC

(2) T

MAY

THI

FOR

THE

AGA

CO

RAD

ACC

INT

OPE

INTE

AT H

NoThis

deta

CoCop

No p

by a

of th

TraBran

2 M

0RDI

CC Statem

THIS DEVICE

Y CAUSE UN

IS EQUIPM

R A CLASS

ESE LIMIT

AINST HAR

MMERCIA

DIATE RAD

CORDANC

TERFEREN

ERATION OF

ERFERENCE

HIS OWN EX

otice

s guide is de

ailed inform

opyright Npyright 2　

part of this d

any means, e

he original m

ademarknd and prod

M10RDI Use

ment

E MUST ACC

DESIRED OP

MENT HAS

S "A" DIGIT

S ARE DE

RMFUL INT

AL ENVIRO

DIO FREQ

CE WITH T

NCE TO RA

THIS EQUIP

IN WHICH C

PENSE.

signed for e

ation, pleas

Notice

2013 Gigab

document m

electronic o

manufacture

k Acknowduct names a

er’s Manua

THIS DEV

RULES. O

FOLLOW

(1) THIS D

INTERFE

EPT ANY INT

PERATION.

BEEN TES

TAL DEVIC

SIGNED T

TERFEREN

NMENT. T

UENCY EN

HE INSTR

ADIO COM

MENT IN A

CASE THE US

experienced

e always ref

byte Techno

may be repro

r mechanica

er.

wledgemeare tradema

al

VICE COM

OPERATIO

WING TWO

DEVICE M

ERENCE.

TERFERENCE

STED AND

CE, PURSU

TO PROVID

NCE WHE

THIS EQUIP

NERGY AN

UCTION M

MUNICATI

RESIDENTIA

SER WILL BE

users to set

fer to the ele

ology Inc.,

oduced, cop

al, for any pu

ent

arks or regist

PLIES WIT

ON IS SUBJ

CONDITIO

AY NOT C

E RECEIVED

D FOUND T

UANT TO P

DE REASO

N THE EQ

PMENT GE

ND, IF NOT

MANUAL, M

IONS.

AL AREA IS LI

E REQUIRED

tup the syste

ectronic use

ALL RIGHT

pied, translat

urpose, with

tered tradem

TH PART 1

JECT TO T

ONS:

CAUSE HAR

INCLUDING

TO COMPL

PART 15 O

NABLE PR

UIPMENT

ENERATES

T INSTALLE

MAY CAUS

IKELY TO CA

TO CORRECT

em within th

er's manual.

TS RESER

ted, or trans

hout the prio

marks of the

5 FCC

THE

RMFUL

INTERFERE

LY WITH TH

F THE FCC

ROTECTIO

IS OPERA

S, USES, A

ED AND U

E HARMFU

USE HARMF

CT THE INTER

he shortest t

RVED.

smitted in a

or written p

eir respectiv

NCE THAT

HE LIMITS

C RULES.

ON

ATED IN A

AND CAN

SED IN

UL

FUL

RFERENCE

time. For

ny form or

ermission

ve owners.

S

User’s Manual

Disclaimer Gigabyte Technology Inc. reserves the right to make changes, without notice, to any product,

including circuits and/or software described or contained in this manual in order to improve

design and/or performance. Gigabyte Technology assumes no responsibility or liability for the

use of the described product(s), conveys no license or title under any patent, copyright, or

masks work rights to these products, and makes no representations or warranties that these

products are free from patent, copyright, or mask work right infringement, unless otherwise

specified. Applications that are described in this manual are for illustration purposes only.

Gigabyte Technology Inc. makes no representation or warranty that such application will be

suitable for the specified use without further testing or modification.

Life Support Policy Gigabyte Technology’s PRODUCTS ARE NOT FOR USE AS CRITICAL

COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE PRIOR

WRITTEN APPROVAL OF Gigabyte Technology Inc.

As used herein:

1. Life support devices or systems are devices or systems which, (a) are intended for

surgical implant into body, or (b) support or sustain life and whose failure to perform,

when properly used in accordance with instructions for use provided in the labeling, can

be reasonably expected to result in significant injury to the user.

2. A critical component is any component of a life support device or system whose failure

to perform can be reasonably expected to cause the failure of the life support device or

system, or to affect its safety or effectiveness.

A Message to the Customer

Gigabyte Customer Services

Each and every Gigabyte’s product is built to the most exacting specifications to ensure

reliable performance in the harsh and demanding conditions typical of industrial

environments. Whether your new Gigabyte device is destined for the laboratory or the

factory floor, you can be assured that your product will provide the reliability and ease of

operation for which the name Gigabyte has come to be known.

M10RDI User’s Manual 3

M10RDI

Your satisfaction is our primary concern. Here is a guide to Gigabyte’s customer services.

To ensure you get the full benefit of our services, please follow the instructions below

carefully.

Technical Support We want you to get the maximum performance from your products. So if you run into

technical difficulties, we are here to help. For the most frequently asked questions, you

can easily find answers in your product documentation. These answers are normally a lot

more detailed than the ones we can give over the phone. So please consult the user’s

manual first.

To receive the latest version of the user’s manual; please visit our Web site at:

http://www.gigabyte.tw/

If you still cannot find the answer, gather all the information or questions that apply to

your problem, and with the product close at hand, call your dealer. Our dealers are well

trained and ready to give you the support you need to get the most from your Gigabyte’s

products. In fact, most problems reported are minor and are able to be easily solved over

the phone.

In addition, free technical support is available from Gigabyte’s engineers every business day. We

are always ready to give advice on application requirements or specific information on the

installation and operation of any of our products. Please do not hesitate to call or e‐mail us.

4 M10RDI User’s Manual

User’s Manual Product Warranty Gigabyte warrants to you, the original purchaser, that each of its products will be free

from defects in materials and workmanship for two years from the date of purchase.

This warranty does not apply to any products which have been repaired or altered by

persons other than repair personnel authorized by Gigabyte, or which have been subject

to misuse, abuse, accident or improper installation. Gigabyte assumes no liability under

the terms of this warranty as a consequence of such events. Because of Gigabyte’s high

quality-control standards and rigorous testing, most of our customers never need to use

our repair service. If any of Gigabyte’s products is defective, it will be repaired or

replaced at no charge during the warranty period. For out-of-warranty repairs, you will be

billed according to the cost of replacement materials, service time, and freight. Please

consult your dealer for more details. If you think you have a defective product, follow

these steps:

1. Collect all the information about the problem encountered. (For example, CPU type

and speed, Gigabyte’s products model name, hardware & BIOS revision number, other

hardware and software used, etc.) Note anything abnormal and list any on-screen

messages you get when the problem occurs.

2. Call your dealer and describe the problem. Please have your manual, product, and

any helpful information available.

3. If your product is diagnosed as defective, obtain an RMA (return material authorization)

number from your dealer. This allows us to process your good return more quickly.

4. Carefully pack the defective product, a complete Repair and Replacement Order Card

and a photocopy proof of purchase date (such as your sales receipt) in a shippable

container. A product returned without proof of the purchase date is not eligible for

warranty service.

5. Write the RMA number visibly on the outside of the package and ship it prepaid to your

dealer.


M10RDI

Content

1.Getting Started ........................................................................................................ 9

1.1 Safety Precautions ...................................................................................................9

1.2 Packing List ..............................................................................................................9

1.3 Document Amendment History ...............................................................................10

1.4 System Specifications .............................................................................................12

1.5 Architecture Overview – Block Diagram ..................................................................14

2. Hardware Configuration ........................................................................................ 15

2.1 Product Overview ....................................................................................................16

2.2 Before you Proceed ................................................................................................18

2.3 Motherboard Overview ............................................................................................19

2.3.1 Placement Direction ........................................................................................................ ……19

2.3.2 Screw Holes ......................................................................................................................... ...19

2.4 Setting Jumpers & Connectors ............................................................................... 23

2.4.1 Serial Port Setting - RS232/422/485 (JRS1, JRS2, JRS3, JRS4) ........................................... 23

2.4.2 Serial Port 1 Select - RS-232/422/485 (JCOM1) ......................................................................24

2.4.3 Serial Port 3 RI Pin Signal Select – Ring/+5V/+12V (JCOM3) .................................................25

2.4.4 Power Mode Select – AT or ATX (AT_CN) ........................................................................ …..26

2.4.5 Clear CMOS (CLR_CMOS) ..................................................................................................... 26

2.4.6 System Fan Connector (SYS_FAN) ........................................................................................ 27

2.4.7 Serial Port 3 Connector (COM3) .............................................................................................. 27

2.4.8 Serial Port 4 Connector (COM4) .............................................................................................. 28

2.4.9 Serial Port 5 Connector (COM5) ............................................................................................ ..28

2.4.10 Serial Port 5 Select - RS-232/422/485 (JCOM5) ................................................................... 29

2.4.11 Serial Port 6 Connector (COM6) ............................................................................................ 29

2.4.12 LVDS Connector (LVDS) ................................................................................................. …...30

2.4.13 LCD Inverter Connector (BKL_CN) ................................................................................... ….31

2.4.14 Front Panel Connector (F_PANEL) ................................................................................. ……31

2.4.15 Front Panel Audio Connector (F_AUDIO)........................................................................... …32

2.4.15.1 Signal Description – Audio connector (F_AUDIO) ......................................................... …..32

2.4.16 Audio Amplifier Connector (SPK_OUT) ..................................................................................33

2.4.17 SATA Power (SATAPW_1) ............................................................................................. ……33

2.4.18 SATA Power (SATAPW_2) ............................................................................................... ….34


User’s Manual

2.4.19 USB Connector (F_USB1) .................................................................................................... 34

2.4.20 USB Connector (F_USB2) ................................................................................................. ...35

2.4.21 GPIO Connector (GPIO_CNT) .............................................................................................. 35

2.4.22 Low Pin Count Connector (LPC) ............................................................................................................. 36

3. BIOS Setup .............................................................................................................. 37

3.1 Introduction ............................................................................................................. 38

3.2 Starting Setup ......................................................................................................... 38

3.3 Using Setup ............................................................................................................ 39

3.4 Getting Help ............................................................................................................ 40

3.5 In Case of Problems ................................................................................................ 40

3.6 BIOS setup .............................................................................................................. 41

3.6.1 Main Menu ................................................................................................................................ 41

3.6.1.1 System Date .......................................................................................................................... 41

3.6.1.2 System Time .......................................................................................................................... 41

3.6.2 Advanced BIOS settings ....................................................................................................... ….42

3.6.2.1 ACPI Settings ........................................................................................................................ 42

3.6.2.2 S5 RTC Wake settings .......................................................................................................... 43

3.6.2.3 SATA Configuration ............................................................................................................... 43

3.6.2.3 SATA Configuration ............................................................................................................... 44

3.6.2.4 USB Configuration .....................................................................................................………...45

3.6.2.5 F81214 Second Super IO Configuration ............................................................................... 46

3.6.2.5.1 Serial Port 1 Configuration .................................................................................................. 46


3.6.2.6 IT8783F Super IO Configuration ........................................................................................... .48





3.6.2.7 IT8783F H/W Monitor ............................................................................................................. 51

3.6.3 Advanced Chipset Features ............................................................................................... ……52

3.6.3.1 Intel IGD Configuration .......................................................................................................... 53

3.6.4 Boot settings ...................................................................................................................... ……54

3.6.5 Security................................................................................................................................. ….55

3.6.5.1 Administrator Password ......................................................................................................... 55


M10RDI

3.6.5.2 User Password ...................................................................................................................... 55

3.6.6 Save & Exit ............................................................................................................................. ..56

3.6.6.1 Save Changes and Exit ......................................................................................................... 56

3.6.6.2 Discard Changes and Exit ..................................................................................................... 57

3.6.6.3 Save Changes and Reset ...................................................................................................... 57

3.6.6.4 Discard Changes and Reset .................................................................................................. 57

3.6.6.5 Save Changes .......................................................................................................................................... 57

3.6.6.6 Discard Changes .................................................................................................................... 57

3.6.6.7 Restore Defaults ..................................................................................................................... 57

3.6.6.8 Save as user defaults ............................................................................................................. 57

3.6.6.9 Restore user defaults ............................................................................................................. 57

3.6.6.10 Boot override ............................................................................................................. ………57

4. Mechanical Drawing .................................................................................................... …..58


1.

1.1

War

Cau

Alw

mot

inst

us f

1.2

Bef

mat

1 x

1 x

1 x

2 x

2 x

1 x

.Gett

Safety Pre

rning!

ution!

ways note t

therboard.

tructions in

for further s

2 Packing

fore you be

terials have

M10RDI M

CD-ROM c

COM cable

SATA cabl

SATA Pow

I/O shield

ting S

ecautions

that improp

We sugges

any circum

support.

g List

gin installin

e been ship

Mini-ITX Mo

contains OS

e

le

wer Cable

Starte

Always co

chassis w

connectio

compone

experienc

chassis.

Always g

touching

sensitive

a ground

compone

bag when

per disasse

st not remo

mstance. If

ng your sing

pped:

otherboard

S drivers/Q

ed

ompletely d

whenever y

ons while th

ents can be

ced electro

round your

the CPU c

to static el

ing wrist st

ents in a sta

n they are n

embling act

oving the he

you really h

gle board,

QIG/User’s

disconnect

you work wi

he power is

e damaged

onics perso

rself to rem

ard. Moder

ectric charg

trap at all ti

atic-dissipa

not in the c

tion could c

eat sink wit

have to do

please ma

Manual

the power

ith the hard

s on. Sensit

by sudden

nnel should

move any st

rn electroni

ges. As a s

mes. Place

tive surface

chassis.

cause dama

thout correc

this, pleas

ke sure tha

M10

Use

cord from

dware. Do n

tive electro

n power sur

d open the

tatic charge

ic devices a

safety preca

e all electro

e or static-s

age to the

ct

e contact

at the follow

0RDI User’s

er’s Manual

your

not make

onic

rges. Only

PC

e before

are very

aution, use

onic

shielded

wing

s Manual 9

l

9

M10RDI

1.3 Document Amendment Histoy

Revision Date Comment

1st January 2013 Initial Release


User’s Manual

This manual describes in detail the Gigabyte Technology M10RDI Single Board.

We have tried to include as much information as possible but we have not duplicated

information that is provided in the standard IBM Technical References, unless it proved

to be necessary to aid in the understanding of this board.

We strongly recommend that you study this manual carefully before attempting to

interface with M10RDI series or change the standard configurations. Whilst all the

necessary information is available in this manual we would recommend that unless you

are confident, you contact your supplier for guidance.

Please be aware that it is possible to create configurations within the CMOS RAM that

make booting impossible. If this should happen, clear the CMOS settings, (see the

description of the Jumper Settings for details).

If you have any suggestions or find any errors concerning this manual and want to inform

us of these, please contact our Customer Service department with the relevant details.


M10RDI

1.4 System Specifications

System Specifications

System

CPU Onboard Intel® Atom™ D2550(N2800/N2600 for Option)

BIOS AMI 16Mb SPI BIOS

System Chipset Intel® ICH10R

I/O Chip ITE8783+ FINTEK F81214

System Memory

2x 204-pin DDR3 SODIMM, up to 4GB

(N2600 support 1 x DDR3 SODIMM only)

Watchdog Timer H/W Reset : 1 to 255 sec/min per step (Option)

H/W Status Monitor

Monitoring temperature, voltage, and cooling fan status.

Auto throttling control when CPU overheats

TPM Infineon TPM1.2 SLB9635 (Optional)

Expansion

1x PCI

2 x mini-PCI-E connectors

Smart Fan Control Yes

Display

Chipset Cedarview Integrated graphics

Dual Display LVDS+VGA, VGA+HDMI, HDMI+LVDS

VGA

HDMI

Max resolution: 1920 x 1200


LVDS

eDP to LVDS translator, Dual channel 18/24 bit


LVDS Backlight Yes, through internal LVDS Backlight Connector

Audio

Audio Codec Azalia Realtek ALC269

Audio Interface Mic-In, Line-In and Line-Out, speaker out

Audio Amplifier(W) Build-in 2W Audio amplifier on chip

Ethernet

Chipset 2 x Realtek 8111E

Ethernet Interface 10/100/1000 Gigabit Ethernet Compatible


User’s Manual


I/O

MIO

2 External(COM1, RS-232/422/485; COM2, RS-232), 4 Internal (COM3&5, RS-232 with 5V/12V selected by jumper, COM4&6, RS-232), 4 SATA II, 1 HDMI, 1 VGA, 1 LVDS, 2 LAN, 1 PS/2

USB 8 USB2.0 ( 4 Rear , 4 internal )

Back Panel I/O Port

Back Panel I/O Port

1 DC-in Connector (4-pin) 1 VGA Port 1 HDMI Port 2 COM Ports 4 USB 2.0 Ports 2 LAN RJ45 Ports 1 Audio I/O (3 Jacks) 1 PS/2 Mini-Din (KB/MS support by external Y-cable)

Internal I/O Connector

Internal I/O Connector

2 USB Connectors each supports 2 USB Ports 4 COM RS-232 Connectors 4 SATA II Connectors, RAID 0,1,5,10 supported 2 SATA Power Connectors 1 Front Panel Connector 1 Front Audio Connector 1 System Fan Connector 1 GPIO Connector 1 Mini PCI-E Connector full size for mSATA (PCIe1X for Option) 1 Mini PCI-E Connector half size for PCIe slot 1 Speaker-out L/R Connector 1 LVDS Connector 1 LVDS Backlight Connector 1 LPC Connector

Power

Power Requirement DC 12V

Power Type AT / ATX mode (selectable by Jumper)

Power Connector

4-pin DC-in Power Connector, 4-pin ATX 12V Power Connector

Mechanical & Environmental

Operating Temperature 0°C to 60°C (32°F to 140°F)

Operating Humidity 0% to 90% relative humidity, non-condensing

Size 6.69" x 6.69" (170 x 170 mm)

Weight 0.77 Ibs (0.35 Kg)

M10

1.5

The

14 M

0RDI

Architect

following b

M10RDI Us

ture Overv

lock diagram

ser’s Manu

view – Blo

m shows the

ual

ock Diagra

e architectur

am

re and main componentts of M10RDDI

User’s Manual

2. Hardware

Configuration


M10RDI

2.1 Product Overview

M10RDI is designed to unleash the power of the new Intel® Atom™ processor D2000 /

N2000 which supports the new revolutionary two–chip layout. The Intel® Cedarview

processor also provides additional flexibility and upgradeability with two slots of single

channel DDR3 memory at 1066 MHz supporting up to 4GB maximum.

2. With breakthrough low-power silicon, M10RDI can be used with a passive thermal

solution based on the recommended boundary conditions.1

3. M10RDI represents a fundamental shift in system design—small, yet powerful enough

to enable a big Internet experience for all audiences.

2.1.1 Platform Features and Benefits • DirectX® 10.1 let you enjoy awesome graphics performance, stunning 3D visual effect

and dynamic interactivity

• Memory support, integrated DDR3 memory controller

• Operating system support:

- Microsoft Windows XP 32/64bit

‐ Microsoft Windows 7 32/64bit

2.1.2 Key Architecture Features • Supports Intel® Atom™ processor D2000 / N2000.series

- Supports 2 lanes in each direction for N2000 processor and 4 lanes in each direction

for D2000 processor (Gen 1 2.5gbps) per lane per direction point- to- point DMI interface.

- Compatible with high speed DDR3-1066MHz

-TDP: 16W

•Intel® HD Audio Technology

• Integrated Display Interfaces

- HDMI

- VGA

- Dual Channel LVDS

• Doubles the transfer speed of SATA, running at speed up to 3.0Gb/s

• Provides 10/100/1000 Mbps solution to your network or broadband connection without

having to buy an

• Onboard audio CODEC supports uncompromising DVD audio quality, bringing a move vivid

sound experience and high‐quality audio without having to buy advanced sound cards.


• Ma

M10

SOD

*SO

Not

(1)

syst

(2)

boa

elec

(3) T

the

Here

ain Memor

0RDI provid

DIMM only

ODIMM mo

te:

Please do

tem’s perfo

Static elect

ards. Before

ctricity by to

The Platfor

far end fro

e, SODIMM2

ry

des 2x 204

y).

dule.

not change

ormance wi

tricity can d

e starting th

ouching a g

rm requires

m the proc

2 is situated

4-pin DDR3

e any DDR

ithout acqu

damage the

hese proce

grounded m

s DDR3 SO

cessor.

d at the far e

3 SODIMM,

SDRAM p

uiring techn

e electronic

edures, ens

metal objec

ODIMMs to

end from the

, up to 4GB

arameter in

nical informa

c compone

sure that yo

ct briefly.

be populat

e processor.

B (N2600 su

n BIOS set

ation in adv

nts of the c

ou are disch

ted starting

M10R

Use

upport 1 x

tup to incre

vance.

computer o

harged of s

g with the S

RDI User’s

er’s Manual

DDR3

ase your

r optional

static

SODIMM at

Manual 17

l

t

7

M10

• I/O

- On

- Tw

- Fo

- Tw

- Hi

- US

- Ha

Fan

2.2

Take

any

18 M

0RDI

O

ne PCI slot

wo Mini-PC

our SATA2

wo 10/100/

gh Definitio

SB: USB 2

ardware Mo

control (Vo

Before yo

e note of the

motherboa

M10RDI Us

t

CIe sockets

ports

1000 Mbps

on Audio

.0/1.1, up t

onitor

ltage, Temp

ou Procee

e following p

rd settings.

　 U

com

　 U

a me

com

　 H

them

　 W

anti-

　 B

ATX

from

dam

ser’s Manu

s Ethernet C

o 8 ports

)

ed

precautions

Unplug the p

mponent.

Use a groun

etal object,

mponents to

Hold compo

m.

Whenever y

-static pad

efore you i

X power sup

m the power

mage to the

ual

Controller

before you

power cord

nded wrist s

such as th

o avoid dam

onents by th

you uninsta

or in the ba

nstall or re

pply is swit

r supply. Fa

motherboa

install moth

d from the w

strap or tou

he power su

maging them

he edges to

all any comp

ag that cam

move any c

ched off or

ailure to do

ard, periphe

herboard co

wall socket

uch a safely

upply case

m due to st

o avoid tou

ponent, pla

me with the

component

r the power

o so may ca

erals, and/o

mponents o

before touc

y grounded

, before ha

tatic electric

uching the I

ace it on a g

componen

t, ensure th

r cord is de

ause sever

or compon

or change

ching any

object or

andling

city

Cs on

grounded

nt.

hat the

tached

re

ents.

2.3

Befo

mot

2.3.

Wh

corr

indi

2.3.

Plac

chas

Motherb

ore you insta

therboard fi

.1 Placeme

en installin

rect orienta

cated in th

.2 Screw H

ce four (4) sc

ssis.

board Ove

all the moth

ts into it. Re

M

re

p

ent Directi

g the moth

ation. The e

e image be

Holes

crews into th

D

m

rview

herboard, stu

efer to the ch

Make sure t

emoving th

hysical inju

on

erboard, m

edge with e

elow.

he holes ind

Do not over

motherboard

udy the con

hassis docum

to unplug th

e motherbo

ury and dam

make sure t

external por

dicated by ci

tighten the

d.

figuration o

mentation b

he power co

oard. Failur

mage moth

hat you pla

rts goes to

rcles to secu

e screws! D

f your chass

before instal

ord before

re to do so

erboard co

ace it into th

the rear pa

ure the moth

Place this

rear of the

M10R

Doing so ca

Use

sis to ensure

ling the mot

installing o

can cause

omponents

he chassis

art of the ch

herboard to

s side towa

e chassis.

RDI User’s

an damage

er’s Manual

e that the

therboard.

or

e you

.

in the

hassis as

o the

rds the

Manual 19

the

l

9

M10RDI


You

A ju

It co

slide

“ope

and

The

A p

Con

key

to c

If yo

con

The

JuLabeJRSJCO

JCO

JCO

AT_CLR

CoLabe

u can config

umper is the

onsists of tw

es over the p

en” a jumpe

3. In this ca

jumper sett

air of need

nnectors on

yboard, or fl

configure yo

ou have an

ntact your lo

following ta

umpers el

S1/2/3/4 OM1

OM3

OM5

_CN

R_CMOS

onnectorel

gure your b

e simplest

wo metal pin

pins to conn

er you remov

ase, you wou

tings are sch

le-nose plie

n the board

loppy drive

our system

ny doubts a

ocal distribu

ables list the

FunctioSerial PSerial PSerial PRing/+5Serial PRing/+5Power Clear C

rs Functio

board to ma

kind of elec

s and a sma

nect them. T

ve the clip. S

uld connect

hematically

ers may be

d are linked

s. In additio

to suit you

bout the be

utor or sale

e function of

on Port 1 SettiPort 1 SelePort 3 RI P5V/+12VPort 5 RI P5V/+12VMode Sele

CMOS

on

atch the ne

ctric switch

all metal clip

To “close” a j

Sometimes

either two p

depicted in

e helpful wh

d to externa

on, the boa

ur applicatio

est hardwa

es represen

f each of the

ing – RS23ect - RS-23Pin Signal S

Pin Signal S

ect – AT or

eeds of you

h.

p (often prot

jumper you

a jumper wi

pins.

this manual

hen working

al devices s

ard has a n

on.

re configur

ntative befo

e board's ju

32/422/48532/422/485Select –

Select –

r ATX

r applicatio

tected by a p

connect the

ill have thre

l as follows:

g with jump

such as har

umber of ju

ration for yo

ore you mak

mpers and c

Note5 3 x 1 he5 3 x 2 he

3 x 2 he

3 x 2 he

3 x 1 he2 x 1 he

Note

M10

Use

on by settin

plastic cover

e pins with t

e pins, labe

pers.

rd disk driv

umpers tha

our applica

ke any cha

connectors.

eader, pitcheader, pitch

eader, pitch

eader, pitch

eader, pitcheader, pitch

RDI User’s

er’s Manual

g jumpers.

r) that

the clip. To

led 1, 2,

es, a

at allow you

tion,

anges.

h 2.00 mmh 2.00 mm

h 2.54 mm

h 2.54 mm

h 2.00 mmh 2.54 mm

s Manual 2

l

u

mm

m

m

mm

1

M10RDI ATX_12V ATX 4pin DC12

SODIMM1 DIMM 1 Slot DDR3

SODIMM2 DIMM 2 Slot DDR3

SYS_FAN System Fan Connector 4 x 1 wafer, pitch 2.54mm

COM1 Serial Port 1 Connector D-sub 9-pin, male

COM2 Serial Port 2 Connector D-sub 9-pin, male

COM3 Serial Port 3 Connector 5 x 2 wafer, pitch 2.00 mm




LVDS LVDS Connector 20 x 2 wafer, pitch 1.25mm

BKL_CN LCD Inverter Connector 5 x 1 wafer, pitch 2.00mm

USB_LAN1 USB+LAN1

USB_LAN2 USB+LAN2

KB_MS PS/2 Keyboard & Mouse Connector

HDMI HDMI

VGA VGA Connector

Min_PCIE1 Mini PCIE Connector 1

Min_PCIE2 Mini PCIE Connector 2 for mSATA

AUDIO AUDIO Line-In/Line-Out/Mic-In

PCI1 PCI Slot

F_AUDIO Front Panel Audio Connector 5 x 2 wafer, pitch 2.00 mm

SPK_OUT Audio Amplifier Connector 4 x 1 wafer, pitch 2.00 mm

SATAII 1/2/3/4 Serial ATA Connector 1/2/3/4

SATAPW_1 SATA Power 1 4 x 1 wafer, pitch 2.54mm

SATAPW_2 SATA Power 2 (Option) 4 x 1 wafer, pitch 2.54mm

F_USB1 USB Connector 1 5 x 2 wafer, pitch 2.54 mm

F_USB2 USB Connector 2 5 x 2 wafer, pitch 2.54 mm

GPIO_CNT GPIO Connector 6 x 2 wafer, pitch 2.00 mm

LPC Low Pin Count Connector 7 x 2 wafer, pitch 2.00 mm

F_PANEL Front Panel Connector 5 x 2 wafer, pitch 2.54 mm

DC_IN DC Power-In Connector


2.4

2.4.

*De

4 Setting Ju

1 Serial Por

efault

umpers &

rt 1 Setting ‐

& Connecto

‐ RS232/422

ors

2/485 (JRS1,

Pin

1

2

3

4

5

, JRS2, JRS3,

RS

RS-23

DCD

RXD

TXD

DTR

GND

, JRS4)

RS23

RS422/

S422/485 P

32 RS-48

D TXD

TXD

D GND

M10R

Use

32*

/RS485

Pin Mapping

85 RS-4

D- TXD

+ TXD

RXD

RXD

D GN

RDI User’s

er’s Manual

g

422

D-

D+

D+

D-

D

Manual 23

l

3

M10

2.4.

*De

24 M

0RDI

.2 Serial P

efault

M10RDI Us

Port 1 Selec

ser’s Manu

t – RS232/4

ual

422/485(JCOM1)

RS232

RS422

Signal

RXD232

RXD422

RXD485

*

2

PIN PIN

1 2

3 4

5 6

RS485

N Signa

2 RXD

4 RXD

6 RXD

al

D1

D1

D1

2.4.

*De

.3 Serial P

efault

Port 3 RI Pinn Signal Seleect – Ring/++5V/+12V (

+5V

Ring*

Signal

VCC

NRI3-

+12V

JCOM3)

*

M10R

PIN PIN

1 2

3 4

5 6

Use

+12V

RDI User’s

N Signa

RI3-/5V

RI3-/5V

RI3-/5V

er’s Manual

Manual 25

al

/12

/12

/12

l

5

M10

2.4.

*De

2.4.

*De

26 M

0RDI

.4 Power

efault

.5 Clear C

efault

M10RDI Us

Mode Selec

MOS(CLR_C

ser’s Manu

ct – AT or A

CMOS)

ual

ATX(AT_CN)

N

Sig

-RTC

GN

Si

N

PWR_F

AT_PW

ATX*

AT

Normal*

Clear

gnal

CRST

ND

gnal P

NC

F_BTN#

R_F_BT

PIN

1

2

PIN

3

2

1

2.4.

2.4.

.6 System

.7 Serial P

m Fan Conne

Port 3 Conn

ector (SYS _

ector (COM

_FAN)

M3)

Sig

GN

+12

FAN

PWM

Signal

NC

NCTS3-

NDSR3

NDTR3-

NRXD3

gnal P

ND

2V

IO2

Input

PIN

9

- 7

- 5

- 3

- 1

M10R

Use

PIN

1

2

3

4

PIN S

10 N

8 N

6

4 N

2 N

RDI User’s

er’s Manual

Signal

NRI3-

RTS3-

GND

TXD3-

DCD3-

Manual 27

l

7

M10

2.4.

2.4.

28 M

0RDI

.8 Serial P

.9 Serial P

M10RDI Us

Port 4 Conn

Port 5 Conn

ser’s Manu

ectot (COM

ector (COM

ual

M4)

M5)

Signal

NC

NCTS4-

NDSR4

NDTR4-

NRXD4

Signal

NC

NCTS5-

NDSR5

NDTR5-

NRXD5

PIN

9

- 7

- 5

- 3

- 1

PIN

9

- 7

- 5

- 3

- 1

PIN S

10 N

8 N

6

4 N

2 N

PIN S

10 N

8 N

6

4 N

2 N

Signal

NRI4-

RTS4-

GND

TXD4-

DCD4-

Signal

NRI5-

RTS5-

GND

TXD5-

DCD5-

2.4.

*De

2.46

.10 Serial

efault

6.11 Seria

Port 5 RI P

al Port 6 Co

in Signal Se

nnector (CO

elect – Ring

OM6)

/+5V/+12V

+5V

Ring*

Signal

NC

NCTS5-

NDSR5

NDTR5-

NRXD5

Signal P

VCC

NRI3-

+12V

V (JCOM5)

*

PIN

9

- 7

- 5

- 3

- 1

M10R

PIN PIN

1 2

3 4

5 6

Use

+12V

PIN S

10 N

8 N

6

4 N

2 N

RDI User’s

Signal

RI3-/5V/1

RI3-/5V/1

RI3-/5V/1

er’s Manual

Signal

NRI5-

RTS5-

GND

TXD5-

DCD5-

Manual 29

12

12

12

l

9

M10

2.4.

30 M

0RDI

.12 LVDS C

M10RDI Us

Connector (

ser’s Manu

(LVDS)

ual

Signal

VCC3

VCC3

SCL1

GND

+RXO1_C

-RXO1_C

GND

+RXO3_C

-RXO3_C

GND

+RXE1_C

-RXE1_C

GND

+RXE3_C

-RXE3_C

GND

+RXECLKE

-RXECLKE_

GND

+12V

PIN

1

3

5

7

C 9

C 11

13

C 15

C 17

19

C 21

C 23

25

C 27

C 29

31

_C 33

_C 35

37

39

PIN

2

4

6

8

10

12

14

16

18

20

22

24

26

28

30

32

34 +R

36 -R

38

40

Signal

VCC

VCC

SDA1

GND

+RXO0_C

-RXO0_C

GND

+RXO2_C

-RXO2_C

GND

+RXE0_C

-RXE0_C

GND

+RXE2_C

-RXE2_C

GND

RXECLKO_C

RXECLKO_C

GND

+12V

C

C

2.4.

2.4.

.13 LCD In

.14 Front

nverter Con

Panel Conn

nector (BKL

nector (F_PA

L_CN)

ANEL)

Signal

-INTRUD

-SYS_RS

GND

SATALE

HD+

Signal

+12V

GND

BKLTEN

BKLTCTL

VCC

l PIN

ER 9

ST 7

5

D- 3

1

M10R

Use

PIN

5

4

3

L 2

1

PIN

10

8

6 P

4

2

RDI User’s

er’s Manual

Signal

NC

GND

PWR BTN#

GND

MPD+

Manual 31

l

M10

2.3.

2.3.1

MIC_L

MIC_R

-ACZ_

HPOU

HPOUT

SRTN1

SRTN2

FAUDI

32 M

0RDI

.15 Front

15.1 Signal

Signal

R

DET

T_R_H

T_L_H

1

2

IO_JD

M10RDI Us

Panel Audi

Description

Fron

Fron

Activ

Fron

Fron

Jack

Jack

Fron

ser’s Manu

o Connecto

n – Audio co

nt panel micro

nt panel micro

ve low when

nt panel head

nt panel head

k detection fo

k detection fo

nt panel jack

ual

or (F_AUDIO

onnector (F_

ophone left c

ophone right

an Intel® HD

dphone right

dphone left c

or front panel

or front panel

detect

O)

Signal

GND

-ACZ_DE

SRTN1

NC

SRTN2

_AUDIO)

Signal Des

channel

t channel

D Audio dong

channel

hannel

microphone

headphone

PIN

2

ET 4

6

8

10

scription

gle is connec

e

PIN

1

3

5 HP

7 FA

9 HP

cted

Signal

MIC_L

MIC_R

OUT_R_H

AUDIO_JD

POUT_L_H

2.4.

2.4.

.16 Audio

.17 SATA P

o Amplifier C

Power (SATA

Connector

TAPW_1)

(SPK_OUT)

Signal

OUT_L

OUT_L

OUT_R

OUT_R

Signal

+12V

GND

GND

VCC

M10R

Use

PIN

L+ 4

L- 3

R- 2

R+ 1

PIN

1

2

3

4

RDI User’s

er’s Manual

Manual 33

l

3

M10

2.4.

2.4.

34 M

0RDI

.18 SATA P

.19 USB C

M10RDI Us

Power (SATA

Connector (F

ser’s Manu

TAPW_2)

F_USB1)

ual

Signa

USB Pow

USBP0

USBP0

GND

GND

Signal

+12V

GND

GND

VCC

l PIN

wer 2

0- 4

+ 6

8

10

PIN

1

2

3

4

PIN

1 US

3 U

5 U

7

9

Signal

SB Power

USBP1-

USBP1+

GND

NC

2.4.

2.4.

.20 USB C

.21 GPIO

Connector (F

Connector

F_USB2)

(GPIO_CNTT)

Signa

USB Pow

USBP0

USBP0

GND

GND

Signal

VCC

SMBCLK

SOGP0_

SOGP0_

SOGP0_

SOGP0_

l PIN

wer 2

0- 4

+ 6

8

10

PIN

11

K 9

_ 7

_ 5

_ 3

_ 1

M10R

Use

PIN

1 US

3 U

5 U

7

9

PIN Si

12 G

10 SMB

8 SO

6 SO

4 SO

2 SO

RDI User’s

er’s Manual

Signal

SB Power

USBP1-

USBP1+

GND

NC

ignal

GND

BDATA

GPI_4

GPI_3

GPI_2

GPI_1

Manual 35

l

5

M10

2.4.

36 M

0RDI

.22 Low P

M10RDI Us

Pin Connect

ser’s Manu

or (LPC)

ual

Signa

-LDRQ

GND

GND

LPC_CL

-LFRAM

-PFMRS

VCC3

l PIN

1 13

11

9

LK 7

ME 5

ST 3

1

PIN S

14 5V

12

10 SE

8 L

6 L

4 L

2 L

Signal

VDUAL

VCC

ERIRQ

LAD3

LAD2

LAD1

LAD0

User’s Manual

3.BIOS Setup


M10RDI

3.1 Introduction

The BIOS setup program allows users to modify the basic system configuration. In this following

chapter will describe how to access the BIOS setup program and the configuration options that

may be changed.

3.2 Starting Setup

The AMI BIOS™ is immediately activated when you first power on the computer. The

BIOS reads the system information contained in the CMOS and begins the process of

checking out the system and configuring it. When it finishes, the BIOS will seek an

operating system on one of the disks and then launch and turn control over to the

operating system.

While the BIOS is in control, the Setup program can be activated in one of two ways:

By pressing <Del> immediately after switching the system on, or

By pressing the <Del> key when the following message appears briefly at the bottom of

the screen during the POST (Power On Self Test).

Press DEL to enter SETUP

If the message disappears before you respond and you still wish to enter Setup, restart

the system to try again by turning it OFF then ON or pressing the "RESET" button on the

system case. You may also restart by simultaneously pressing <Ctrl>, <Alt>, and

<Delete> keys. If you do not press the keys at the correct time and the system does not

boot, an error message will be displayed and you will again be asked to.

Press F1 to Continue, DEL to enter SETUP


User’s Manual

3.3 Using Setup

In general, you use the arrow keys to highlight items, press <Enter> to select, use the PageUp

and PageDown keys to change entries, press <F1> for help and press <Esc> to quit. The following

table provides more detail about how to navigate in the Setup program using the keyboard.

Button Description

↑ Move to previous item

↓ Move to next item

← Move to the item in the left hand

→ Move to the item in the right hand

Esc key Main Menu -- Quit and not save changes into CMOS

Status Page Setup Menu and Option Page Setup Menu -- Exit current page

and return to Main Menu

PgUp key Increase the numeric value or make changes

PgDn key Decrease the numeric value or make changes

+ key Increase the numeric value or make changes

- key Decrease the numeric value or make changes

F1 key General help, only for Status Page Setup Menu and Option Page Setup

Menu

F2 key Previous Values.

F3 key Optimized defaults

F4 key Save & Exit Setup

Navigating Through The Menu Bar

Use the left and right arrow keys to choose the menu you want to be in.

Note: Some of the navigation keys differ from one screen to another

To Display a Sub Menu

Use the arrow keys to move the cursor to the sub menu you want. Then press <Enter>. A “”

pointer marks all sub menus.


M10RDI

3.4 Getting Help

Press F1 to pop up a small help window that describes the appropriate keys to use and the

possible selections for the highlighted item. To exit the Help Window press <Esc> or the F1 key

again.

3.5 In Case of Problems

If, after making and saving system changes with Setup, you discover that your computer

no longer is able to boot, the AMI BIOS supports an override to the CMOS settings which

resets your system to its defaults.

The best advice is to only alter settings which you thoroughly understand. To this end, we

strongly recommend that you avoid making any changes to the chipset defaults. These defaults

have been carefully chosen by both AMI and your systems manufacturer to provide the absolute

maximum performance and reliability. Even a seemingly small change to the chipset setup has

the potential for causing you to use the override.


3.6

Onc

scre

cho

and

3.6.

This

com

3.6.

Use

and

3.6.

Use

and

Not

BIOS setup

ce you ent

een. The M

oices. Use

d enter the

.1 Main Me

s section a

mputer and

.1.1 Syste

e the syste

d year.

.1.2 Syste

e the syste

d seconds.

te: BIOS s

exactly

(www.gi

ter the AMI

Main Menu

the arrow

sub-menu

enu

allows you

d set the sy

em Date

em Date op

em Time

em time opt

setup scree

match wha

gabyte.tw)

BIOS CM

allows yo

keys to se

u.

to record s

ystem cloc

ption to set

tion to set

ens shown

at you see

) to downlo

MOS Setup

u to select

elect among

some basi

ck.

t the system

the system

in this cha

on your sc

oad the late

Utility, the

t from seve

g the items

c hardware

m date. Ma

m time. Ma

apter are fo

creen. Visit

est produc

e Main Men

eral setup f

s and pres

e configura

anually ent

nually ente

or referenc

t the Gigab

ct and BIOS

M10R

Use

nu will app

functions a

s <Enter>

ations in yo

ter the day

er the hour

ce only, an

byte websi

S informat

RDI User’s

er’s Manual

ear on the

and exit

to accept

our

y, month

rs, minutes

d may not

ite

ion.

Manual 41

l

s

M10

3.6.

This

thro

3.6.

You

A

42 M

0RDI

.2 Advance

s section allo

ough the foll

.2.1 ACPI

can use this

Item ACPI Sleep S

M10RDI Us

ed BIOS s

ows you to c

lowing sub‐m

Settings

s item to set

State

ser’s Manu

ettings

configure yo

menus.

t up ACPI Co

SusS1 (C

S3 (Suspe

ual

our CPU and

onfiguration

Options

spend DisablCPU Stop Cloend to RAM)

other syste

ed ock), [Default]

m devices fo

D

Select thestate the sthe SUSPE

or basic ope

Description

e highest ACsystem will enEND button i

eration

CPI sleep nter when s pressed

3.6.

Wa

Wake

3.6.

.2.2 S5 RT

Ite

ake system w

e system wi

.2.3 SATA C

TC Wake s

em

with Fixed T

ith Dynamic

Configuratio

settings

Time D

c Time D

n

Options

EnabledDisabled[Defa

EnabledDisabled[Defa

ault]

Enabevenon th

ault]

EnabWhencurre

De

ble or disablent. When enahe hr::min::sele or disable

n enabled, Snt time + Inc

M10R

Use

escription e System waabled, Systemec specified.

e wake on alaSystem will wcrease minut

RDI User’s

er’s Manual

ake on alarmm will wake . arm event. ake on the es (s)

Manual 43

l

m

3

M10

44 M

0RDI

Ite

SATA

Serial-ATA

Serial-ATA

eSATA Po

M10RDI Us

em

A Mode

Controller 0

Controller 1

ort Support

ser’s Manu

ID

0 Co

1 E

D

ual

Options

Disabled DE Mode[Def

ACHI ModRAID ModeEnabled Disabled

ompatible[DefEnabled[Defa

Disabled

Enabled Disabled[Defa

fault] e e

fault] Ena

ault] Ena

ault]

De

Select IDE/

ble/ Disable

ble/ Disable

eSATA

escription

AHCI/ RAID

Serial ATA C

Serial ATA C

A Port Suppo

D Mode.

Controller 0.

Controller 1.

ort.

3.6.

The

Leg

U

.2.4 USB Co

USB configu

Item

gacy USB s

USB_DRIVE

onfiguration

uration men

upport

1.00

n

nu is used to

Optio

Enabled[DDisabAuto

Auto[DeFlopp

Forced Hard DCD‐RO

o read USB c

ons

Default] bled o

A

efault] py FDD

Disk OM

MeFfo

configuration

Enables LegAUTO optiondevices are keep USB deapplications.

Mass storageenumerates dForced FDD oormatted driv

n informatio

Descr

gacy USB sun disables legconnected. Devices availa.

e device emudevices less option can beve to boot as

M10R

Use

on and confi

ription pport. gacy supporDISABLE opable only for

ulation type. than 530MBe used to for

s FDD (e.g. Z

RDI User’s

er’s Manual

gure USB.

rt if no USB tion will EFI

‘AUTO’ B as floppies.rce HDD ZIP drive).

Manual 45

l

5

M10

3.6.

You

port

Ser

Ser

3.6.

46 M

0RDI

.2.5 F81214

can use this

ts. Please re

Item

rial Port 1 C

rial Port 2 C

.2.5.1 Seria

Item

Serial Po

M10RDI Us

4 Second Sup

s item to set

efer to 3.6.2.

m

Configuratio

Configuratio

al Port 1 Conf

rt

ser’s Manu

per IO Confi

t up or chan

.5.1 and 3.6

n

n

figuration

Disa

ual

figuration

nge the F812

.2.5.2 for m

Set P

Set P

Options Enabled

abled[Default]

214 Second S

ore informa

De

Parameters o

Parameters o

] E(C

Super IO con

tion.

scription

of Serial Port

of Serial Port

De

Enable or DisCOM).

nfiguration f

t 1 (COM1).

t 2 (COM2).

escription sable Serial P

for serial

Port

3.6..2.5.2 Seria

Item

Serial Po

al Port 2 Conf

rt

figuration

Disa

Options Enabled

abled[Default]] E(C

De

Enable or DisCOM).

M10R

Use


RDI User’s

er’s Manual

Port

Manual 47

l

7

M10

3.6.

You

Plea

S

S

S

S

48 M

0RDI

.2.6 IT8783

can use this

ase refer to 3

Ite

erial Port 3

erial Port 4

erial Port 5

erial Port 6

M10RDI Us

3F Super IO C

s item to set

3.6.2.6.1, 3.

em

Configurati

Configurati

Configurati

Configurati

ser’s Manu

Configuratio

t up or chan

6.2.6.2, 3.6.

on

on

on

on

ual

on

nge the IT878

.2.6.3 and 3

Se

Se

Se

Se

83F Super IO

.6.2.6.4 for m

D

t Parameters

t Parameters

t Parameters

t Parameters

O configurat

more inform

Description

s of Serial Po

s of Serial Po

s of Serial Po

s of Serial Po

tion for seria

mation.

ort 3 (COM3

ort 4 (COM4

ort 5 (COM5

ort 6 (COM6

al ports.

)

)

)

)

3.6.

3.6.

.2.6.1 Seria

Item

Serial Po

.2.6.2 Seria

Item

Serial Po

al Port 3 Conf

rt

al Port 4 Conf

rt

figuration

Disa

figuration

Disa

Options Enabled

abled[Default]

Options Enabled

abled[Default]

] E(C

] E(C

De

Enable or DisCOM).

De

Enable or DisCOM).

M10R

Use



RDI User’s

er’s Manual

Port

Port

Manual 49

l

9

M10

3.6.

3.6.

50 M

0RDI

.2.6.3 Seria

Item

Serial Po

.2.6.4 Seria

Item

Serial Po

M10RDI Us

al Port 5 Conf

rt

al Port 6 Conf

rt

ser’s Manu

figuration

Disa

figuration

Disa

ual

Options Enabled

abled[Default]

Options Enabled

abled[Default]

] E(C

] E(C

De

Enable or DisCOM).

De

Enable or DisCOM).



Port

Port

3.6.

The

.2.7 IT8783

H/W Monit

3F H/W Mon

tor shows th

nitor

he operatingg temperature, fan speeds and syste

M10R

Use

em voltages

RDI User’s

er’s Manual

.

Manual 51

l

M10

3.6.

R

In

52 M

0RDI

.3 Advance

Item

Restore AC P

Azalia HD

Onboard

LAN PXE

Onboard

LAN PXE

Mini P

Mini P

ntel IGD Con

M10RDI Us

d Chipset Fe

m

Power Loss

D Audio

d LAN1

E ROM

d LAN2

E ROM

CIE1

CIE2

nfiguration

ser’s Manu

eatures

PoweP

Enab

Enab

Enab

Enab

Enab

Enab

Enab

ual

Options er Off[DefaulPower On Last State bled[DefaultDisabled

bled[DefaultDisabled






lt]Specifyre-appli

t] Ena

t] Enable in the C

t] Enable Network

t] Enable in the C

t] Enable Network

t] Enable in the C

t] Enable in the C

Config Inte

Desc

what state ted after a po

able / Disable

or Disable thChipset.

or Disable Bk Devices.


or Disable Bk Devices.



el IGD Setting

cription

to go to whenower failure (

e Azalia HD A

he PCI Expre

Boot Option f

he PCI Expre

Boot Option f

he PCI Expre

he PCI Expre

gs.

n power is (G3 state).

Audio.

ess Ports

for Legacy

ess Ports

for Legacy

ess Ports

ess Ports

3.6.

I

Fixe

LV

.3.1 Intel IG

Item

GFX – Boot

ed GraphicsSize

VDS Backlig

Panel ID

GD Configur

t Type

s Memory

ht PWM

D

ration

VBIOS

256

100

1024x768 800x1024x1024x1280x

1920x640x800x

1280x1440x

1600x1366x

1920x1680x

Options

Default[DefaCRT EFP

128MB 6MB[Default]

0% 25% 50% 75%

0% [Default]

1ch 24bit[Dx600 1ch 18bx768 1ch 18bx600 1ch 18bx800 1ch 18b

x1200 2ch 24x480 1ch 18bx480 1ch 18bx1024 2ch 24x900 2ch 18b

x1200 2ch 24x768 1ch 24b

x1080 2ch 24x1050 2ch 24

ault] Seace

] CoSiz

LV

efault]bit bit bit bit 4bit bit bit 4bit bit 4bit bit 4bit 4bit

De

lect the Videctivated durinffect if extern

onfigure Fixedze.

VDS Backligh

P

M10R

Use

escription

eo Device whng POST. Thnal graphics

d Graphics M

ht PWM Con

Panel ID.

RDI User’s

er’s Manual

hich will be his has no

present.

Memory

figuration.

Manual 53

l

3

M10

3.6.

Setu

Boot

PC

Bo

54 M

0RDI

.4 Boot sett

Item

p Prompt Ti

up NumLoc

Quiet Boo

Fast Boot

CI ROM Prio

oot Option #

M10RDI Us

tings

imeout

ck State

ot

t

ority E

#1/2/3

ser’s Manu

O

1~

On

EDisabl

EnableD

EFI CompatiLeg

ual

Options

~65535

[Default] Off

Enabled led[Default]

ed [Default]Disabled

ble ROM[Deacy ROM

Set

Nuact65wa

Se

EnOp

Eninitdevbobo

efault] In ROCoOp

ts the system

Deumber of secotivation key. 535(0xFFFF

aiting.

elect the key

ables or Disaption

ables or Disatialization of vices requireot option. Haot options case of multi

OMs(Legacy ompatible),spption ROM to

m boot order

escription onds to wait

F) means ind

yboard NumL

ables Quiet

ables boot wa minimal se

ed to launch as no effect f

iple Option and EFI

pecifies whato launch.

for setup

efinite

Lock state

Boot

with et of active

for BBS

t PCI

3.6.

Use

3.6.

This

If on

prog

pas

3.6.

This

boo

be e

have

.5 Security

the Security

.5.1 Admin

s setting sp

nly the Adm

gram and i

ssword is sp

.5.2 User P

s setting spe

ot the system

entered to b

e Administra

y menu to s

nistrator P

pecifies a p

ministrator's

s only aske

pecified.

Password

ecifies a pass

m. If only the

boot or ente

ator rights. B

et system an

assword

password th

s password

ed for when

sword that m

e User's pass

r the BIOS se

By default, n

nd user pass

hat must be

d is set, the

n entering t

must be ente

sword is set

etup progra

no password

sword.

e entered to

en this only

the BIOS s

ered to acce

, then this is

am. In the BI

d is specified

o access th

limits acce

etup progra

ess the BIOS

s a power on

OS setup pr

d.

M10R

Use

he BIOS Se

ess to the B

am. By def

S Setup Utilit

n password

rogram, the

RDI User’s

er’s Manual

etup Utility.

BIOS setup

ault, no

ty or to

and must

User will

Manual 55

l

5

M10

3.6.

3.6.

Use

and

56 M

0RDI

6 Save & Ex

.6.1 Save C

e the save c

d to exit the

M10RDI Us

xit

Changes a

changes an

e BIOS conf

ser’s Manu

and Exit

nd reset op

figuration s

ual

ption to sav

setup progr

ve the chan

ram.

ges made

to the BIOS

S options

User’s Manual

3.6.6.2 Discard Changes and Exit

Use the Discard changes and Exit option to exit the system without saving the changes

made to the BIOS configuration setup program.

3.6.6.3 Save Changes and Reset

Any changes made to BIOS settings are stored in NVRAM. The setup program then exits

and reboots the controller.

3.6.6.4 Discard Changes and Reset

Any changes made to BIOS settings during this session of the BIOS setup program are

discarded. The setup program then exits and reboots the controller.

3.6.6.5 Save Changes

Changes made to BIOS settings during this session are committed to NVRAM. The

setup program remains active, allowing further changes.

3.6.6.6 Discard Changes

Any changes made to BIOS settings during this session of the BIOS setup program are

discarded. The BIOS setup continues to be active.

3.6.6.7 Restore Defaults

This option restores all BIOS settings to the factory default. This option is useful if the

controller exhibits unpredictable behavior due to an incorrect or inappropriate BIOS

setting.

3.6.6.8 Save as user defaults

This option saves a copy of the current BIOS settings as the User Defaults. This option is

useful for preserving custom BIOS setup configurations.

3.6.6.9 Restore user defaults

This option restores all BIOS settings to the user defaults. This option is useful for

restoring previously preserved custom BIOS setup configurations.

3.6.6.10 Boot override

This option lists all possible bootable devices and allows the user to override the Boot

Option Priorities list for the current boot. If no changes have been made to the BIOS

setup options, the system will continue booting to the selected device without first

rebooting. If BIOS setup options have been changed and saved, a reboot will be required

and the boot override selection will not be valid.

Option Priorities list for the current boot. If no changes have been made to the BIOS

setup options, the system will continue booting to the selected device without first

rebooting. If BIOS setup options have been changed and saved, a reboot will be required

and the boot override selection will not be valid.


M10RDI

4.Mechanical

Drawing

58 M10RDI User’s Manua

M10R

Use

RDI User’s

er’s Manual

Manual 59

l

9

m10rdi intel atom mini itx motherboard with intel ich10r...

Documents