ma2.8q data sheet - martin audio · ma2.8q. at 1u and 7.3kg (16lbs) this amplifier offers...

1
MA2.8Q Lightweight, High Performance Amplifier features Switch-mode power supply Advanced Class D Output Stage Low inrush current Built-in clip limiters Variable speed cooling fan Comprehensive front panel indicators Fully protected circuitry Compact, lightweight applications Live sound reinforcement Fixed installations Century Point, Halifax Road, Cressex Business Park, High Wycombe, Buckinghamshire HP12 3SL, England. Telephone: +44 (0)1494 535312 Facsimile: +44 (0)1494 438669 E-mail: [email protected] All information is Copyright © 2010 Martin Audio Ltd. www.martin-audio.com technical specifications electronics Adding to the range of MA Series amplifiers is the new MA2.8Q. At 1U and 7.3kg (16lbs) this amplifier offers unparalleled performance in a compact, light weight, cost effective package. Delivering up to 700 watts per channel (4 ohm) to each of its four channels, this amplifier provides the power and quality that will more than meet the requirements of small to medium sized applications such as stage monitors, installed and portable sound reinforcement. With Clip Limiting, DC, VHF, Thermal and AC protection built in as standard, this new additions to the MA range of amplifiers will continue to supply peak performance and power over many years of service. MAX OUTPUT POWER EIA AT 1KHz AND 1% THD 8W PER CHANNEL 360W 4W PER CHANNEL 700W 8W BRIDGED 1400W DISTORTION THD FROM 0.1W TO FULL POWER < 0.05% (Typically <0.01%) INTERMODULATION SMPTE < 0.05% (Typically <0.01%) INTERMODULATION DIM 100 < 0.02% (Typically <0.005%) S/N RATIO > 112dBA (20Hz to 20kHz) DAMPING FACTOR (8 ) W > 500 @ 100Hz SLEW RATE (8 ) W 50 V/µs GAIN 32dB FRONT PANEL LED INDICATORS Signal Clip Protect Thermal Forecast REAR PANEL INPUT CONNECTORS 4 x XLR (Female) Input OUTPUT CONNECTORS 4 x Neutrik Speakon LINK SWITCH Channel A-B Link, Channel C-D Link POWER OPERATION VOLTAGE AC: 115V or 230V (+15% - 25%) (internal selection) 50/60Hz DIMENSIONS WIDTH 483mm (19ins) HEIGHT 44mm (1.75ins) 1U DEPTH 358mm (14ins) WEIGHT 7.3kg (16lbs) overall dimensions 440.0mm [17.32"] 19.6mm [0.77"] 5.5mm [0.22"] 44.0(1U) 482.0mm [18.98"] All information is Copyright © 2010 Martin Audio Ltd. 356.0mm [14.02"] 346.0mm [13.62"] MA2.8Q -18dB -18dB SIGNAL SIGNAL READY READY TEMP TEMP -6dB -6dB CLIP CLIP REAR RACK SUPPORT FIXINGS MA2.8Q

Upload: others

Post on 24-Jun-2020

1 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: MA2.8Q Data Sheet - Martin Audio · MA2.8Q. At 1U and 7.3kg (16lbs) this amplifier offers unparalleled performance in a compact, light weight, cost effective package. Delivering up

MA2.8QLightweight, High Performance Amplifier

features

Switch-mode power supply

Advanced Class D Output Stage

Low inrush current

Built-in clip limiters

Variable speed cooling fan

Comprehensive front panel indicators

Fully protected circuitry

Compact, lightweight

applicationsLive sound reinforcement

Fixed installations

Century Point, Halifax Road, Cressex Business Park,High Wycombe, Buckinghamshire HP12 3SL, England. Telephone: +44 (0)1494 535312 Facsimile: +44 (0)1494 438669E-mail: [email protected] information is Copyright © 2010 Martin Audio Ltd.

www.martin-audio.com

technical specifications

electronics

Adding to the range of MA Series amplifiers is the new MA2.8Q. At 1U and 7.3kg (16lbs) this amplifier offers unparalleled performance in a compact, light weight, cost effective package. Delivering up to 700 watts per channel (4 ohm) to each of its four channels, this amplifier provides the power and quality that will more than meet the requirements of small to medium sized applications such as stage monitors, installed and portable sound reinforcement. With Clip Limiting, DC, VHF, Thermal and AC protection built in as standard, this new additions to the MA range of amplifiers will continue to supply peak performance and power over many years of service.

MAX OUTPUT POWEREIA AT 1KHz AND 1% THD 8W PER CHANNEL 360W4W PER CHANNEL 700W8W BRIDGED 1400WDISTORTIONTHD FROM 0.1W TO FULL POWER < 0.05% (Typically <0.01%)INTERMODULATION SMPTE < 0.05% (Typically <0.01%)INTERMODULATION DIM 100 < 0.02% (Typically <0.005%)S/N RATIO > 112dBA (20Hz to 20kHz)DAMPING FACTOR (8 )W > 500 @ 100Hz SLEW RATE (8 )W 50 V/µsGAIN 32dBFRONT PANELLED INDICATORS Signal

ClipProtectThermal Forecast

REAR PANELINPUT CONNECTORS 4 x XLR (Female) InputOUTPUT CONNECTORS 4 x Neutrik SpeakonLINK SWITCH Channel A-B Link, Channel C-D LinkPOWEROPERATION VOLTAGE AC: 115V or 230V (+15% - 25%)(internal selection) 50/60HzDIMENSIONSWIDTH 483mm (19ins)HEIGHT 44mm (1.75ins) 1UDEPTH 358mm (14ins)WEIGHT 7.3kg (16lbs)

overall dimensions440.0mm [17.32"]

19

.6m

m [0.7

7"]

5.5

mm

[0.2

2"]

44.0

(1U

)

482.0mm [18.98"]

All information is Copyright © 2010 Martin Audio Ltd.

356.0

mm

[14.0

2"]

346.0

mm

[13.6

2"]

MA2.8Q-18dB -18dB

SIGNAL SIGNAL

READY READYTEMP TEMP

-6dB -6dB

CLIP CLIP

- -- -8 88 8dB dBdB dB+32 +32+32 +32

REAR RACK SUPPORT FIXINGS

MA2.8Q