machine design stm - weiss : startseite...229 customer-specific solutions|sr/sk indexing machine...
TRANSCRIPT
229
SR/SK INDEXING MACHINE BASESCUSTOMER-SPECIFIC SOLUTIONS |
MACHINE DESIGN STMFax to: +49 (0) 6281 5208-99 or just fill in the form online: www.weiss-international.com
SK Series
SR Series
Stationary plateMaterial:
Steel AlMg4.5Mn Special ___________________Surface treatment:
Without Anodised Chem. nickel-plated Special _____Seal between stationary and rotary plate:
Inside Outside Special __________________Dimensions Ø E _____________________ mmDimensions F____________________ mm -1mm air gap = thicknessDimensions Ø G _____________________ mmProcessing according to drawing No. _____________________
Rotary plateMaterial:
Steel AlMg4.5Mn Special ___________________Surface treatment:
Without Anodised Chem. nickel-plated Special _____Flatness of ring:
A B Special __________________Standard assembly and bore hole pattern:
With countersinking Without countersinkingDimensions Ø C __________ mm Thickness D _________ mmMachining according to drawing No. _____________________
Spacer Height For rotary indexing table Height __________ mm For stationary centre plate Height __________ mm
Rotary Indexing TableModel ___________No. of stations _____ (according to machine dimensioning rotary indexing tables)
Dimensions L _________ mm Colour: RAL __________________
Enquiry Attachment to order
Dear customer,Thank you for your interest in our indexing machine bases. Please answer the following questions, to ensure we optimise the design of the system to suit your application:
Base PlateMaterial:
Steel AlMg4.5Mn Special ____________________Surface treatment:
Without Anodised Chem. nickel-plated Special ____Cable duct Standard According to drawing No. ______T-slots No YesProcessing according to drawing No. _____________________Round: Dimensions Ø A ______ mm Thickness B _______ mmSquare/rect. Dim. A1 _________ mm Dim. A2 __________ mmWith steel base plate Dim. A1 and A2: Machined UnmachinedThickness B ________________ mm
Standard tolerance B -2/+4 Special tolerance
Base frameSR Series (round design)
BG 100R BG 200R BG 300R BG 400R BG 500R Height M __________ mm
SK Series (square /rect. design) BG 100K BG 200K BG 300K
Height M _________ mm
Machining/customisation according to drawing No. ________ Colour: RAL ________________Machine feet Yes No Screw-on Anchoring
For technical enquiries
Company: ___________________________________________________Name: ______________________________________________________Country: ____________________________________________________
Desired delivery date: _______________________________________Phone: _________________________ Fax: _______________________E-Mail: ______________________________________________________