machine tool buying guide

[email protected] YOUR THOMAS SKINNER MACHINE TOOL REPRESENTATIVE 1-800-567-2131

MACHINE TOOLBUYING GUIDE

Volume 2 | September 2021

V A N C O U V E R | E D M O N T O N | C A L G A R Y | W I N N I P E G

CALL YOUR THOMAS SKINNER MACHINE TOOL REPRESENTATIVE 1-800-567-2131

MACHINE TOOL BUYING GUIDE MACHINE TOOL BUYING GUIDE


INDEX

**Five-year warranty applies to OSP control. Machine tool warranty is two years. Labor warranty is one-year.

Thermo-FriendlyConcept


***Five-year warranty applies to OSP control. Machine tool warranty is three years. Labor warranty is one year.

1Varies with turret.

[Option]

The LT-EX series is the premium turning center available withup to three 16-station turrets all capable of Y-axis and M-functionThe perfect platform for high-volume work and unmanned operationthrough its automation-friendly design and available in-machineunloader.

LB3000EXII / LB4000EXII

LB3000EXII-MY

Collision Avoidance System

MODEL LT2000EX M/MY LT3000EX M/MYTurret 2- or 3-Turret 2- or 3-Turret

Designation Standard Bore Big Bore Standard Bore Big BoreMax Machining Diameter ×

Length 8.27" × 5.12" 13.78" × 7.88"

Spindle Noses 140 mm A2-6 A2-6 A2-8Spindle I.D. 2.44" 3.15" 3.15" 3.58"Spindle HP 15 HP [30 HP] 30 HP [40 HP]

Spindle Speed 6000 rpm 4500 rpm 5000 rpm 4200 rpmM Spindle HP (2 min/cont) 7.3/5 HP 9.5/5.5 HP

M Spindle Speed 6000 rpm 6000 rpmTurrets 16-Station Multitasking 16-Station Multitasking

MODEL LB3000EX II LB4000EX IIMax turning diameter1 16.14” 18.90”

Max work lengths available 19.69” | 39.37” | 51.18” (500 | 1000 | 1300 mm)

29.53” | 59.06” | 84.65” (750 | 1500 | 2150 mm)

Spindle nose types available A2-6 | A2-8 | A2-11 A2-8 | A2-11 | A2-15

Spec extension M, MY, MW, MYW M, MY

Twin Spindle Turning Centers

M: Milling, W: Sub-spindle, Y: Y-axis

1

The LB-EXII series are Okuma's premium single turret lathes, known for power, speed and accuracy. The thermo-friendly design provides precision for today's most demanding turning needs. Available with Y-axis, and live-tool turret. The LB3000EXII isavailable with Sub-Spindle option. There’s a configuration to meet any shop’s requirement.

Now withindustry-leading5-year warranty***.

Now withindustry-leading5-year warranty**.

LB4000EXII-2000-BBMY shown with Auto-Steady Rest.

LB3000EXII-800-MYWshown with Touchsetter.

LB-EX TRAORDINARY

WELCOME TO OPEN POSSIBILITIES

Lathes CNC Horizontal Spindle ...................................1, 4, 10 CNC Vertical Spindle............................................3, 20 Manual ......................................................................27 Multitasking ........................................................2-3, 16 Swiss-Style ...............................................................18Lathes, CNC GEMINIS ..................................................................17 Haas..........................................................................10 Okuma .....................................................................1-4 Tsugami ....................................................................18 You Ji ........................................................................20Machining Centers Double-Column ........................................................20 Horizontal ..............................................................4, 13 Vertical .................................................................11-12MARVEL Horizontal Mitering Band Saws ...............................24 Horizontal Post-Style Band Saws ............................24 Ironworkers ...............................................................28 Vertical Tilt-Frame Band Saws ................................25Milling and Boring Machines ..........................................16Milling Machines First ...........................................................................28 Fortworth ...................................................................28MITSUBISHI EDM ..........................................................19MITUTOYO Coordinate Measuring Machines ................ 7OKAMOTO Surface Grinders ........................................21OKUMA CNC Turning Centers .............................................1, 4 Horizontal Machining Centers ................................... 4 Intelligent and Advanced Technologies ..................... 5 Multitasking Machines ............................................2, 3 OSP CNC Control ...................................................... 5Sandvik Coromant Capto ................................................. 8SORALUCE ....................................................................16Surface Grinders Kent ...........................................................................21 Okamoto ...................................................................21Tooling Packages ............................................................. 9TSUGAMI Swiss-Type CNC Lathe ................................18YOU JI Vertical Lathes ...................................................20

ADVANCE Manual Lathes .............................................27AMADA Circular Saws ...........................................................23 CNC Band Saws ......................................................22 Horizontal Band Saws ..............................................23 Pulse-Cutting Band Saws ........................................22Band Saws CNC ..........................................................................22 Horizontal ..................................................................23 Horizontal Mitering .............................................24, 26 Horizontal Post-Style ..........................................24, 26 Pulse-Cutting ............................................................22 Vertical Tilt-Frame ....................................................25CNC Accessories ............................................................. 6Coordinate Measuring Machines ..................................... 7Drilling Machines Geared Head ............................................................28 Radial Arm ................................................................27EDM ...............................................................................19FIRST Milling Machines .................................................28FORTWORTH Milling Machines....................................28GEMINIS Horizontal Lathes ...........................................17HAAS Automated Systems ............................................14-15 Automatic Parts Loader ...........................................14 Lathes .......................................................................10 Horizontal Machining Centers .................................13 Pallet Pools ...............................................................15 Robot Systems .........................................................14 Rotary Tables ............................................................15 Universal Machining Centers ...................................12 Vertical Machining Centers ...................................... 11HYDMECH Horizontal Mitering Band Saws ...............................26 Horizontal Post-Style Band Saws ............................26IMA Drilling Machines .....................................................28Ironworkers ....................................................................28JOHNFORD Double-Column Machining Centers ........20KAO MING Radial Arm Drilling Machines .....................27KENT Surface Grinders .................................................21

CALL YOUR THOMAS SKINNER MACHINE TOOL REPRESENTATIVE 1-800-567-2131 CALL YOUR THOMAS SKINNER MACHINE TOOL REPRESENTATIVE 1-800-567-2131


Available Options• Fully Programmable Steady Rest• Full NC B-Axis (5-Axis Simultaneous Machining)• Long Boring Bar Stocker (for B750)

Okuma Intelligent Multitasking MachinesMULTUS B550/B750Full process-intensive machining of large-diameter,long workpieces. Higher productivity than a large latheand machining center.

MULTUS B250II / MULTUS B300II / MULTUS B400IIProcess-intensive machining. Small footprint.



1S: 1-Saddle, 2S: 2-Saddle, C: Tailstock, W: Opposing Spindle [Option]

5-Axis TuningSystem

Machining Navi

MULTUS U4000-2SW

MULTUS B750W

MODEL MULTUS U3000 MULTUS U4000 MULTUS U5000

Max Machining Diameter Upper Turret (1S) 25.59”

Max Machining Diameter Lower Turret (2S) 12.59”

Available Distance Between Centers 39.37” | 59.06” 59.06” | 78.74” 59.06” | 78.74”

X Travel Upper Turret (1S) / Lower Turret (2S) 22.83” / 9.25” 27.36” / 9.25”

Y Travel 9.84” (±4.92”) 11.81” (±5.91”)B / C Travels 0.001°/360°

Spindle Noses Available (Main) A2-6 [A2-8] A2-8 [A2-11] A2-11Spindle Noses Available (Opposing) A2-6 [A2-8 on 1SW] A2-8 [A2-11 on 1SW] A2-11 (1SW) / A2-8 (2SW)

Upper Turret H1, 12000 rpm, CAPTO C6Lower Turret (2S) V12 Bolt-on Static [M Turret Optional]

ATC 40 [80, 120]Spec Extension 1SC, 2SC, 1SW, 2SW

MODEL MULTUS B550 MULTUS B750Max Machining Diameter 32.68” 41.33”

Available Distance Between Centers 78.74” | 118.11” 118.11” | 157.48” | 236.22”

X / Y Travels 36.42” / 20.47” (±10.24”) 42.52” / 26” (±13”)

B / C Travels 0.001°/360°

Spindle Noses Available A2-11 A2-11 [A2-15, A2-20]

Spindle Noses Available (Opposing) A2-11 A2-11 [A2-11, A2-15]

Turret H1, 10000 rpm, CAPTO C8ATC 40 [80,160]

Spec Extension Tailstock (C) or Opposing Spindle (W) available.

MULTUS U3000/U4000/U5000

[Option]

[Option]

• Highly rigid and accurate double-column structure• Full 5-axis cutting capability• Option of either CAT 40/50 or HSK A63/100 taper spindles• Optional C axis turning capability• Pallet pools and matrix automatic tool changers available.

High efficency, high productivity, 5-axis multi-sided machining.

MODEL VTM-1200YB VTM-2000YBMax Turning Diameter 47.24” 78.74”

XYZ Travels 50.00” × 39.37” × 42.52” 62.99” × 62.99” × 55.12”B / C Travels 0.001°/360°

Turning Spindle 40 HP, 5 – 500 rpm 40 HP, 4 – 200 rpmMilling Spindle 50 HP, 10000 rpm, CAPTO C8 or BIGPLUS

ATC 36 [60, 120]

5-axis vertical multitasking machines.For large-component, highly accurate 5-axis applications

MU-6300VMODEL MU-5000V MU-6300V MU-8000V

Work Envelope 31.50” × 41.34” × 23.62” 36.42” × 41.34” × 23.62”Table Size 19.69” 24.80” 31.50” × 24.80”

This is just a small sampling of Okuma’s multitasking

machine product line.View Okuma’s impressive line-up of lathes with the capacity to meet a variety

of any production needs at www.okuma.com

**Five-year warranty applies to OSP control. Machine tool warranty is two years. Labor warranty is one-year.

**Five-year warranty applies to OSP control. Machine tool warranty is 2 years. Labor warranty is one-year.

2 3

5-Axis TuningSystem

Also available MU-4000V

[Option]

• Orthogonal Y-axis layout• Wide 240° B-axis swing• Full 5-axis contouring available• Optional lower turret (2SW)• Optional steady rest• Gear machining package available




• Fast and powerful 5-axis multitasking capabiity to combine operations in one setup• Generous Y-axis travel• 225° B-axis swing• Full 5-axis contouring available• Sub-spindle and tailstock options available• Powerful CAPTO C6 spindle with HSK option available• Thermo-Friendly Concept for high precision machining

MODEL MULTUS B250II MULTUS B300II MULTUS B400IIMax machining diameter 23.62” 24.80” 27.95”

Available Distance Between Centers 29.53” 35.43” 59.06” | 78.74”

X / Y Travels 19.68” / 7.87” 22.83” / 6.30” 27.17” / 9.06”

B / C Travels 225° / 360°

Spindle Noses Available (Main) A2-6 A2-6 [A2-8] A2-8 [A2-11]

Spindle Noses Available (Opposing) ∅140 Flat A2-6 A2-8

Turret H1, 12000 rpm, CAPTO C6 H1, 6000 rpm, CAPTO C6

ATC 40 [60] 40 [60, 120] 40 [80, 120]

Spec Extension Tailstock (C) or Opposing Spindle (W) available.

Okuma Intelligent Multitasking Machines




Machining Navi[Option]


CALL YOUR THOMAS SKINNER MACHINE TOOL REPRESENTATIVE 1-800-567-2131CALL YOUR THOMAS SKINNER MACHINE TOOL REPRESENTATIVE 1-800-567-2131


Thermo-Friendly Concept Working with temperature changes.

Variable Spindle Speed ThreadingGood threads from the first piece.

Turn-CutTurning on a machining center.

Advanced One-Touch IGF (AOT)On-machine conversational programming.

3D Virtual Monitoring (3DVM)Test and edit programs before theyever hit the machine.

Collision Avoidance SystemYour safeguard against costly human errors.

Machining NaviCutting condition search.

5-Axis Auto TuningGauging and compensation of geometric error.

The Next-Generation Intelligent CNCOSP-P300A

Built by Okuma – a machine & control manufacturer.

Okuma Intelligent TechnologiesFor the competitive machine shop.

Okuma Advanced TechnologiesTake your machining capabilities to the next level!

Measures real-time temperaturefluctuations in machine andcompensates cutting parametersto maintain a high level of accuracy.(Standard on most machines)

Oscillate spindle RPM while cuttingchallenging threads to suppressunwanted resonance and harmonics.(Option)

Create bores, diameters and other turnedfeatures on your horizontal milling machinewhere handling on a lathe is impossible.(Option)

AOT lets you easily create a program onyour Okuma machine tool. AOT providesstep-by- step instructions to guide youthrough the process of selecting materialtype, shape, tooling, processes, andcutting motions.Uses a DXF importfunction to import drawing shapesstraight into AOT. Simulates the cutting process and shows a cutting time studyPosts the NC part program—and youcan make additional edits to it as well.(Option)

3DVM software provides accurate,3-dimensional simulations based on the machine and program you’re using. That way you can safely, quickly, and accurately produce the desired part without worrying about the small errors that can have a huge impact on overall productivity. (Option)

Real time 3D monitoring of machine, partand cutting tools to prevent human errorthat could lead to a crash.(Option)

Intelligent management of cutting variablesto suppress harmonics and chatter that canoccur on challenging work pieces. (Option)

Allows your operator to compensate for up to11 geometric errors, including volumetricaccuracy, in less than 10 minutes.(Standard on 5-Axis machines)

• Windows® based, open-architecture platform. • PC-compatible Ethernet and multiple USB ports. • Intel i3 2.4GHz Dual Core Processor (4th generation).• Hard disk drive capacity of 120GB.

• Program storage capacity of 4GB.• Operation buffer capacity of 2MB.• Multi-touch panel.• Intuitive graphical operation.

Every OSP-P300A control has the following features:

54

■ High productivity ■ High accuracy ■ Small footprint■ Expandable ■ Easy to operate


MB-5000H II

Available Options• Factory Pallet Pools (6, 10, 12)• Renishaw Work Gauging• Turn Cut Function• High Pressure Coolant System• FMS Prep

MODEL MB-4000H MB-5000H IIPallet size 400 mm square pallet 500 mm square pallet

Axis travels XYZ 22.05” × 22.05” × 24.61” 29.92” × 29.92” × 31.89”Max work size 23.62” × 35.43” 31.50” × 39.37”Spindle speed 15000 rpm

Spindle 35 HP, CAT40 BIGPLUS

ATC 48-tool Chain Matrix Magazines available to 218

48-tool Disk Matrix Magazines available to 260

Footprint 7’ 11” × 15’ 5” 9’ 6” × 18’ 10”

Turn-Cut Option shown in boring application.

High-Speed Horizontal Machining Centers

Premium two spindle, two turret, lathe with built-in Okuma Gantry Loader (OGL). Perfect choice for high volume production.Simple enough for operator friendly, fast, changeovers.

***Five-year warranty applies to OSP control. Machine tool warranty is three years. Labor warranty is one-year.

• Tool magazine sizes• Tool load monitoring• Tool groups and redundant tools• Remote access to machine… real-time • Factory solutions• Thermal stability

Now withindustry-leading5-year warranty***.


IntegratedAutomation

4-Second PartLoad/Unload

• Combines 2 lathes on a single automation-friendly machine. • Unique, parallel spindle design, combined with stacker crane and overhead gantry loader allows for lights out production from raw material to finished product – without handling by an operator. No expensive integration costs. No 3rd party suppliers. It’s out-of-the box factory automation!• Compact footprint improves floor space utilization.• Optional milling tool spindle (M) for greater parts diversity.


Palletized Production Must-Haves

High-speed loader

*Shows optional second stacker crane.

Headstock and turret centers of gravity positioned over sturdy slide guides

Left spindle Right spindle

Part turnaround device




Enhance Your Okuma Machine Tool’s Productivity

Front-End PneumaticPower ChucksLarge Through-HoleFull spindle bore can be used.

Quick-Grip™ Accu-Length™CNC Collet Chucks

Rugged, dependable High-Pressure Coolant Systems from basic systems for less demanding applications and environments to solutions for the most sophisticated machine tools available.

Eliminate idle time and KEEP YOUR SPINDLE RUNNING. With a MIDACO Pallet Changer System, you can change parts OUTSIDE of your machine WHILE its cutting and exchange pallets in seconds on your VMC.

Pallet Changers are a simple solution to eliminate unnecessary spindle downtimeon large as well as small and mid-size machining centers.

Off-the-shelf or custom-designed, LNSSteady Rests are available in a variety of models with capacities from 0.2” to a size that preciselyfits your largest application.

Complete Barfeeder product range – short, half and long bars – for all types of fixed or sliding headstock lathes. Reliable, flexible, and the fastest diameter changeover available today.

Sync existing workholding with your machine for ultimate spindle uptime! VERO-S from SCHUNK is the Modular Quick-Change Pallet System for very fast and extremely precise conversion of workpieces, clamping devices or other equipment on modern machining centers. Adaptable to all workholding products for infinite possibilities.Consistent, easy changeover.

BIG BORE® BB-N:• Chuck size 400 – 800 mm• Thru-hole 140 – 410 mm• Standard jaw stroke• For end machining of long pipes.

BIG BORE® BB-N-ES: • Chuck size 400 – 1000 mm• Thru-hole 140 – 560 mm• Extended jaw stroke• For end machining of long pipes with high collars.• Rapid and clamping stroke for short clamping cycles.

Add a Rota-Rack® to a bar-fed CNC lathe andincrease machine utilization and throughput.It’s Simple, Off-The-Shelf Automation!

• The best choice for main spindle and required for sub-spindles to ensure proper part transfer.• 10-second collet changes• Widest collet gripping range.• Compact and Ultra-Compact models to suit all machines and applications

• Deeper drilling• Improved surface finish• Longer tool life.• Faster cycle times• Superior chip management

Rota-Rack™Parts Accumulator

Always a step ahead

6 7

CRYSTA-Apex V Ser iesCNC Coordinate Measur ing Machine

● M itutoyo’s new generat ion CMM that makes the Smar t Fac tor y a real i t y.● H igh measurement accurac y.● Real-t ime temperature compensat ion.● Mult i -sensor f lex ibi l i t y with v is ion, laser, sur face f in ish , scanning and 5-axis probe opt ions.● Suppor ts a wide range of measurements and var iet y of work pieces with a l ineup of 3 width s izes / 10 models.

M iSTAR 555 CNC Coordinate Measur ing Machine

● Designed for use on any s ize shop f loor.● Al lows for in- l ine/s ide - l ine inspec t ion outs ide of the Qual i t y I nspec t ion Lab.● H igh environmental res istance.● Guaranteed temperature accurac y range of 10°C to 40°C.● H igh-speed.● Smar t Fac tor y capable.

M iCAT Planner(M itutoyo I ntel l igent Computer Aided Technology)Automatic Measurement Program Generat ion Sof t ware

M iCAT Planner is M itutoyo's sof t ware developed for fast , e f f ic ient CMM par t programming. M iCAT Planner uses sof t ware to ident i fy tolerance information included in 3D models with Produc t and Manufac tur ing I nformation (PMI) , def ines the locat ion for measurement, and creates a measurement program ful ly automatical ly. Through i ts opt imizat ion func t ion, the sof t ware est imates the shor test route for measurement with the minimum number of probe re -posit ionings and tool changes, and creates a program that enables measurement in the shor test t ime. Automation enables programming t ime to be reduced by 90%, enabl ing a s igni f icant potent ia l increase in the ef f ic ienc y of measurement work .

M itutoyo Canada I nc.

Measuring Range

X 570 mm (22.4”)

Y 500 mm (19.6”)

Z 500 mm (19.6”)

Measuring Table CapacityMax workpiece height 660 mm (25.9”)

Max loading 120 kg. (264.5 lbs.)

Measuring Ranges CRYSTA-Apex V 544 Series (2 sizes)

CRYSTA-Apex V 776 Series (2 sizes)

CRYSTA-Apex V 9106 Series (6 sizes)

X 500 mm 700 mm 900 mm

Y 400 mm 700 mm 700 mm 1000 mm 1000 mm 1600 mm 2000 mm

Z 400 mm 600 mm 600 mm 800 mm



8 9

MAKE TOOLING A PART OF YOUR MACHINE TOOL PURCHASEWITH A THOMAS SKINNER TOOLING CERTIFICATE

Enjoy Preferred Pricing and Premium Discounts.*Make Your Machine Tool Investment Productive From Day One.

Reduce Machine Tool Payback Time.Get Expert Tooling Support From Your Thomas Skinner Representative.

Contact your local Thomas Skinner Territory Manager for complete detailsabout our Tooling Certificate Program.

Below are just some of the quality name brands you can access with your custom Thomas Skinner Tooling Certificate*

* off manufacturer’s list price. Some exceptions and restrictions apply.

(hand tools only)(standard tooling only)

A new machine is a major investment for your company. Add a Tooling Packageto your machine purchase and make your investment productive from day one.

Tool It Up Right from the Start with Sandvik

We’re here for you from start, to part.

Go from this scenario...

...to this with Sandvik Coromant

Effor

t

Time

• Involvement of all parties• Focus on cost per • component vs price of • machine and tools• Compare technical • solutions• Engineering analysis

• Price• Troubleshooting• Extra cost new tools• Optimization

• High cost per • component• High pressure to • produce parts• Delivery time for • new tools• Firefighting

• Quicker run-off• Less frustration• Right component • quality

Add a Tooling Package to your machine purchaseand make your investment productive from day one.

When you involve the right team from the beginning of the process, you will have a more efficient and profitable operation once the machine is installed.

Work with your Thomas Skinner and Sandvik Coromant Sales Representatives to evaluate current parts,processes and applications, taking into consideration components you may add in the future. Take advantageof Sandvik Coromant’s global network of specialists that can provide the expertise to help ensure youmaximize the return on your investment and that you are productive right after implementationof your new machine tool.

Coromant Capto® system - the originalCoromant Capto is a machine tool interface, which is equally at home as a modular tool holding system providing almost unlimited combinations. It is one system that forms just as good a solution for Turning, Milling and Drilling applications.

The total Coromant Capto range includes six different sizes, C3 to C10, with a broad programme of basic holders, clamping units, tool holders, integrated cutting tools, adapters and chucks.

Available for a wide variety of Okuma and Haas CNC Lathes. These clamping units and driven tool holders are designed to fit specific turret interfaces with unique bolt patterns for each machine.

- the design - the couplingThe tapered polygon transmits torque and ensures centre without drive keys. Face and taper contact combinedwith good cross-section strength allow higher clamping forces, ensuring excellent bending stiffness.

Provides a unique combination of properties:• Balanced and concentric• Quick-change and automated tool change• Through-tool delivery of coolant• Damped Boring and Milling adapters

- the offerUp to one year. That’s how much you can cut payback time on your new machine investment. To fully maximize return on investment, it is crucial to focus on getting everything right from the start.

Let’s work together to pay off your machine investment faster.

Open

Closed

www.sandvik.coromant.com

CALL YOUR THOMAS SKINNER MACHINE TOOL REPRESENTATIVE 1-800-567-2131 CALL YOUR THOMAS SKINNER MACHINE TOOL REPRESENTATIVE 1-800-567-2131CALL YOUR THOMAS SKINNER MACHINE TOOL REPRESENTATIVE 1-800-567-2131


Options to help your machine do what itdoes best – make chips efficiently.

• High Pressure Coolant• Live Tooling & C-Axis*

• Other Turrets Available**• Automatic Tool Presetter• Belt-Type Chip Conveyor• Programmable Tailstock(Manual on ST-10/ST-15)

• Parts Catcher System• Enclosure Exhaust System

• Auto Door• Chuck Air Blast

Many more! *Standard on Y-Axis Models

**Depending on model

High Performance Turning for Any Shop Haas turning centers offer a wide range of capabilities, including toolroom lathes, big-bore versions, dual-spindle models, live tooling with C-axis, and Y-axis capability. The Haas ST Series high-performance turning centers were designed from the ground up to provide setup flexibility, extreme rigidity, and high thermal stability.

Specifications subject to change by manufacturer without notice.Cutting capacity shown will vary with turret and workholding.This A2-5 Finishing Sub Spindle is available

for ST-10 to ST-35 including Y-axis models.

Spindle Nose Model

Bar Capacity Work Envelope

OPTIONS

A2-

5 ST-10 1.75” 12” × 16” ▲ ▲ ▲ ▲

ST-10L 1.75” 12” × 32.5” ▲ ▲ ▲ ▲

A2-

6

ST-15 2.5” 12” × 16” ▲ ▲ ▲ ▲

ST-15L 2.5” 12” × 32.5” ▲ ▲ ▲ ▲

ST-20 2.5” 13” × 22.5” ▲ ▲ ▲ ▲

ST-20L 2.5” 13” × 42.5” ▲ ▲

ST-25 3” 13” × 22.5” ▲ ▲ ▲ ▲

ST-25L 3” 13” × 42.5” ▲ ▲

ST-30 3” 15” × 32.5” ▲ ▲ ▲

ST-30L 3” 15” × 62.5” ▲ ▲

DS-30Y 3” 13.75” × 32.5” ▲ ▲

A2-

8

ST-28 4” 13” × 22.5” ▲ ▲ ▲ ▲

ST-28L 4” 13” × 42.5” ▲ ▲

ST-35 4” 15” × 32.5” ▲ ▲ ▲

ST-35L 4” 15” × 62.5” ▲ ▲

ST-40 4” 25.5” × 44”

ST-40L 4” 25.5” × 80”

A2-

11 ST-45 7” 25.5” × 44”

ST-45L 7” 25.5” × 80”

A2-

15+ ST-50 8.5” 25.5” × 80”

ST-55 12.5” 25.5” × 80”

Y-A

xis

Sub

Spi

ndle

AP

L

Rob

ot

Automate Your Lathe PartProduction with a Haas Bar Feeder.

Vertical Machining CentersVF SERIESX Travels from 20” to 150” – Regardlessof your requirements there’s a VF just rightto meet the demands of your machine shop.

Dual-Pallet Vertical Machining CenterVC-400 & VC-400SSCombines the machining capabilities of a small VF-series VMC with an HMC-style pallet changer. Load and unload parts on the pallet waiting at the load station, while the spindle is making chips in the work envelope. Keep the machine producing parts! You can even set up a new job on one pallet, while your machine is making parts on the other.

SMALLVF-1 20” × 16” × 20” (xyz)

VF-2 30” × 16” × 20” (xyz)VF-2SS

Super Speed 30” × 16” × 20” (xyz)

VF-2TR 5-Axis 30” × 16” × 20” (xyz)

VF-2YT 30” × 20” × 20” (xyz)VF-2SSYT

Super Speed 30” × 20” × 20” (xyz)

LARGEVF-6 64” × 32” × 30” (xyz)

VF-6SS

Super Speed64” × 32” × 30” (xyz)

VF-6TR

5-Axis64” × 32” × 30” (xyz)

VF-6/50 64” × 32” × 30” (xyz)

VF-6/50TR

5-Axis64” × 32” × 30” (xyz)

VF-7 84” × 32” × 30” (xyz)

VF-7/50 84” × 32” × 30” (xyz)

VF-8 64” × 40” × 30” (xyz)

VF-8/50 64” × 40” × 30” (xyz)

VF-9 84” × 40” × 30” (xyz)

VF-9/50 84” × 40” × 30” (xyz)

VF-10 120” × 32” × 30” (xyz)

VF-10/50 120” × 32” × 30” (xyz)

VF-11 120” × 40” × 30” (xyz)

VF-11/50 120” × 40” × 30” (xyz)

VF-12 150” × 32” × 30” (xyz)

VF-12/50 150” × 32” × 30” (xyz)

MEDIUMVF-3 40” × 20” × 25” (xyz)

VF-3SS Super Speed

40” × 20” × 25” (xyz)

VF-3YT 40” × 26” × 25” (xyz)

VF-3SSYT Super Speed 40” × 26” × 25” (xyz)

VF-3YT/50 40” × 26” × 25” (xyz)

VF-4 50” × 20” × 25” (xyz)

VF-4SS Super Speed 50” × 20” × 25” (xyz)

VF-5 50” × 26” × 25” (xyz)

VF-5SS Super Speed 50” × 26” × 25” (xyz)

VF-5TR 5-Axis 50” × 26” × 25” (xyz)

VF-5XT 60” × 26” × 25” (xyz)

VF-5/50 50” × 26” × 25” (xyz)

VF-5/50TR 5-Axis 50” × 26” × 25” (xyz)

VF-5/50XT 60” × 26” × 25” (xyz)

VF-14/40 150” × 40” × 30” (xyz)

VF-14/50 150” × 40” × 30” (xyz)

Model VC-400 VC-400SS

Axis Travels XYZ 22” × 16” × 20”

Spindle Speed 8100 rpm 12,000 rpm

Tool Changer Capacity 30+1 (50+1 option)

Number of Pallets 2 (6+1 optional pallet pool)

Pallet Size 22” × 14.5” T-slot

ADDING AN AXIS:ROTARY TABLES

• 100 – 1000 mm Platter Size• 35 – 830 deg/sec Speed• 35 – 2000 ft-lb max torque

10 11



Universal Machining Centers UMC Series5-Axis for Every ShopHaas Universal Machining Centers are cost-effective solutionsfor 3+2 machining and simultaneous 5-axis machining.

5-Axis Dual Station Vertical Machining CenterUMC-1500-DUOUMC-1500SS-DUOThe Haas UMC-1500-DUO is like having two machines in one: a powerful 5-axis universal machining center, and a versatile 3-axis vertical machining center. Haas has taken its industry-leading UMC-750 universal machining center, expanded its X-axis travel, and added a stationary 32" × 18" T-slot table next to the dual-axis trunnion. When you need to run 5-axis and 3-axis jobs back-to-back without tearing down either setup, theUMC-1500-DUO series makes it possible.

UMC-500• 24” × 16” × 16” Travels• 8100 rpmUMC-500SS• 24” × 16” × 16” Travels• 12000 rpm


• 5-Axis Simultaneous Machining• Powerful Inline Direct-Drive Spindle• Large-Capacity Side Mount Tool Changer



Industry Leading WirelessIntuitive Probing System (WIPS).

Dynamic Work Offset/Tool Center PointControl simplifies 5-axis machining.

High-Speed Machining is standardon UMC-SS models only.

HSK available on 15,000 rpmSpindle option.

5-Axis& 3-AxisMachinein One!

Model UMC-1500-DUO UMC-1500SS-DUO

Axis travels XYZ 60” × 20” × 20”

Spindle speed 8100 rpm 12,000 rpm

Tool changer capacity 30+1 (50+1 option)

Dual-axis trunnion 19.7” platter diameter

40-Taper Pallet Changing Horizontal Machining Centers The Perfect Solution for Production Machining

50-Taper Horizontal Machining Centers The Perfect Solution for Large-Part Machining

EC-400400 mm Twin-Pallet HMC

• 22” × 25” × 22” (xyz)

*Available for order with a new EC-400 only.

• 64” × 50” × 32” (xyz)• 50” max part swing with optional integrated 4th Axis • 64” × 50” × 40” (xyz)

• 78” max part swing with optional integrated 4th Axis

• 64” × 50” × 40” (xyz)• 78” max part swing• Includes the Integrated 4th Axis Platter, adds a 5th Axis Rotary and A-Frame Support, Wireless Intuitive Probing and DWO/TCPC.

• 32” × 25” × 28” (xyz)

EC-400/500 Standard Features:

• 8100 rpm Spindle (Higher Spindle Speeds available)• 1400 IPM Rapids• 30+1 Side-Mount Tool Changer (Options for 50+ or 100+1 available)• Full 4th-Axis Rotary System• Belt-Type Chip Conveyor

EC-1600 Series Standard Features:

• 7500 rpm Spindle, 2-Speed Gearbox• Chip Auger• Enclosure Exhaust System• Remote Jog Handle

EC-500500 mm Twin-Pallet HMC

6-Station Pallet Pool

Take the Haas EC-400 to the next level with the optional fully integrated 6-Station Pallet Pool. It’s perfect for high-volume production runs, or high-mix/low-volume machining.

EC-1600EC-1600ZT

EC-1600ZT-5AX

For a complete list ofHaas products, visitwww.haascnc.com

12 13


IndexersEasy to set up, and ideal for holding small parts with accuracy.

HRT RotariesT-slotted rotary tables for holding medium to large parts or fixtures.

TRT RotariesReduce setups with added 5-axis capabilities.

TR RotariesDesigned to handle medium to large parts for multi-side machining with accuracy and repeatability.

14

Robot Systems

Automatic Parts Loader

Robot Package 2Robot Package 1 Robot Package 37 Kg capacityFor Haas small VMC’s andST-10 through ST-25 turning centers

25 Kg capacityfor Haas medium VMC’s andST-20 through ST-35 turning center

50 Kg capacityHaas large VMC’s andST-35/L turning centers

A simple and affordable way to automate partproduction and boost productivity.Connects directly to the Haas control.Includes light curtain for safe operation.

Lathe APLFor parts up to 5.8" diameter × 5" length × 10 lbs.Available on ST-10Y, ST-15Y, ST-20 / ST-20Y,ST-25 / ST-25Y.

Mill APLFor parts up to 6" length × 6" width × 10 lbs.Available on VF-1, VF-2, VF-2SS, VF-2YT,VF-2SSYT, VM-2.

UMC-500 APLFor parts up to 6" length × 6" width × 10 lbs.Available on UMC-500, UMC-500SS.

Robot Package 2

All-inclusive robotic automation solutions for yourHaas machine. Everything needed to startautomatic loading and unloading of parts areincluded (6-axis robot, stand, fence, etc.).

15

Some Pallet Pools require larger capacity side mount tool changers. Pallet pools must be anchored for proper operation.

TRT210

HA5C

TR160

If automation is about eliminating operations and simplifying processes,the fastest way to eliminate operations on a 3-axis Haas mill is to add a Haas single- or dual-axis rotary table.Reduce or totally eliminate multiple setups, and easily handle multi-sided parts.Haas rotary tables and indexers are the perfect bolt-on solutions for boosting productivity and machining complex parts.

4th and 5th Axis

HRT210

Haas Automated Systems

Pallet Pools

For high-volume production runsor high-mix/low-volume machining.Integrate seamlessly with the Haascontrol. A simplified Pallet ScheduleTable allows pallet-schedulingfunctions from a single dedicatedscreen.

6-Station Pallet Pool- EC-400- VC-400/SS

16-Station Pallet Pool- UMC-500/SS

8-Station Pallet Pool- UMC-500/SS- UMC-750/SS- UMC-1000/SS

3-Station Pallet Pool (Q4 2021)- VF-2/SS/YT/SSYT- VM-2

8-Station Pallet Pool.Available on the UMC-1000/SS.

CALL YOUR THOMAS SKINNER MACHINE TOOL REPRESENTATIVE 1-800-567-2131 CALL YOUR THOMAS SKINNER MACHINE TOOL REPRESENTATIVE 1-800-567-2131CALL YOUR THOMAS SKINNER MACHINE TOOL REPRESENTATIVE 1-800-567-2131


World Leader in Large-ScaleHorizontal and Multi-Process Lathe Technology.

G2: 2 Z Axis guidewaysG4: 4 Z Axis guideways

Available OptionsMain Spindle Bore Options

Spindle bore diameter 6.4” 9.1” 12.7” 14.2” 16.2” 20.7” 21.1”

Spindle nose DIN 55026 15 15 20 20 28 28 28

Diameter of front spindle bearing 8.7” 11.0” 15.5” 17.0” 18.9” 25.6” 25.6”

Spindle speed 900 rpm 700 rpm 500 rpm 500 rpm 400 rpm 400 rpm 400 rpm

• 2nd cross slide group• Automatic tailstock positioning• Hydraulic or manual steady rest• Live tooling and Y axis• Wide selection of turrets • Chucks • Measuring probes • Guarding • Machining devices (milling, boring, grinding, etc.)

Model GT5 Series-G2/G4 GT7 Series-G2/G4 GT9 Series-G2/G4 GT11 Series-G2/G4Swing over bed 47.24” 62.99” 78.74” 94.50”Swing over cross slide 33.46” 47.24” 62.99” 70.87”Distance between centers 40” - 787” 40” - 945”Weight between centers 13,230 - 26,460 lbs. 26,460 - 55,125 lbs. 55,125 - 77,175 lbs. 77,175 - 176,400 lbs.

FLOOR TYPE MILLING AND BORING MACHINES

• Longitudinal traverse: On request• Vertical traverse: 1800 — 8000 mm• Cross traverse: 1300 — 1900 mm• Quill traverse: 700 — 1000 mm

PORTAL AND GANTRY MILLING-BORING MACHINES

• Longitudinal traverse: On request• Cross traverse: 4500 — 10500 mm• Vertical RAM traverse: 1500 — 3000 mm• Vertical traverse, cross beam: 1000 — 4000 mm

F RangePrecision in big dimensions machining

PORTAL RangeEnhanced precision in a high capacity machine range

MULTITASKING CENTERS

• Longitudinal traverse: 2500 — 4000 mm• Vertical traverse: 1250 — 1800 mm• Cross traverse: 1200 — 1500 mm• Turning table: Ø1250 — 1600 mm• Table surface: Ø1250 — 3500 x 1400/4000 x 1240 mm

Dynamics Active StabilizerEliminates any chatter that may arise.

Optimum performance under control. Improved precision in big workingvolumes for any head.

Fully automatically interchnagesthe quill spindle with other heads.

Compensates the head articulationpositioning deviation for one particular

position of the head.

Dynamics Workpiece StabilizerActive damping device

Eliminates chatter when flexible parts are machined.

MULTITASKING RangeAll in one, complete machining in single set-up

16 17


TMU1R

Swiss turning performance. Job shop flexibility. Tsugami’s B0326-III CNC Automatic Lathe is the only32 mm Swiss turn that converts from Swiss guidebushing operation to “chucker” mode in minutes.This added flexibility reduces expensive material costsThe horizontally opposed gang tool layout offers theshortest tool-to-tool path and therefore the quickestpossible chip-to-chip time. The B0326-III has Y-axis and8 live tool positions on the sub spindle tool post –overlapped, simultaneous machining is enabled. Alsoavailable, model B0386-III that provides 38 mm barstock capacity and built to take heavier cuts.

Accuracy. Speed. Rigidity.

Learn more about Tsugami's

machine models available for

North America.

B0326-III

Chucker convertible – in minutes!

B0326-III Tool Zone(may show optional tools)

PARTNER WITH THE WORLD LEADERIN SMALL PART TURNING SOLUTIONS

www.remsales.com/all-tsugami-cnc-machines

Wire EDMElectrifying innovation—unmatched performance• Cylindrical drive technology… Linear shaft motor provides non-contact zero wear drive system for long life and improved accuracy.• Innovative Automatic Wire Threading… Most reliable in the industry.• Advanced touchscreen CNC… Mitsubishi M800 series CNC control is designed with ease of use in mind, efficient and user-friendly.• Hardened table/machine construction…Designed to resist scratching and daily wear.• Lowest operating cost… low wire consumption.

Sinker EDMUnbeatable Precision. Countless Options.

MV2400-S

Cylindrical Drive Technology

Endless Innovation.Unmatched Performance.

EA12S

EA Series Models Travels

EA8S11.8” × 9.8” × 9.8”

EA8PSEA12S 15.7” × 11.8” × 11.8”EA12PSEA28V 25.6” × 17.7” × 13.8”

MV Series Models Machining Range XYZ Max Workpiece Dimensions

MV1200S 15.7” × 11.8” × 8.7” 31.9” × 27.6” × 8.5”

MV1200R 15.7” × 11.8” × 8.7” 31.9” × 27.6” × 8.5”

MV2400S 23.6” × 15.7” × 12.2” 41.3” × 32.3” × 12.0”

MV2400ST 23.6” × 15.7” × 16.7” 41.3” × 32.3” × 16.5”

MV2400R 23.6” × 15.7” × 12.2” 41.3” × 32.3” × 12.0”

MV4800 31.5” × 23.6” × 20.1” 49.2” × 40.1” × 20.0”

Features S Series PS Series V & V LS Series

Fuzzy Pro Control System

Integrated Digital Power Master Control

M700 Control (15” touchscreen)

SS Jump 5(High-Speed Jump Stabilization System)

Initial Machining Control

Linear Scales on X, Y, Z

Thermal Buster

Power Supply Circuits

Table EA8Granite/EA12 Steel

Chiller

3-Sided Drop Tank

18

Swiss turning precision. Multifunction CNCmilling flexibility.Tsugami has mounted an articulated B-axisvertical spindle inside their proven Swiss TypeCNC lathe platform to deliver the TMU1R. Witha resident 60-tool ATC (118 optional) and16-station turret, this 38 mm turning center isperfect for short runs of complex parts madecomplete in a single set-up. Both main and subspindles are identically powered, and machiningperformance is further enhanced by a 10,000 rpmhorizontal tool spindle, mounted to B-axis. Thefront and rear spindles both feature full C-axiscapability, and the horizontal tool spindle offers210° of positioning via the B-axis.

19

MACHINE TOOL BUYING GUIDE



Johnford DMC SeriesMoving-Table Bridge Mills

You Ji YV / VTL Series – Vertical Ram-Type Lathes

YV Series

VTL Series• Built for large, heavy part machining.• Meehanite cast iron construction.• Rigid, extra large box ways, and large diameter pre-tensioned ballscrews.• All mating surfaces coated with Turcite-B and then hand scraped for perfect fit and alignment. • Timken Cross Roller table bearings for best rigidity and precision• High power, high torque, gear-driven spindle motors.• 29 models in the series offer a wide variety of size and configurations for productive processing of medium to large size parts.

• Suitable for most general-purpose applications.• Available with 24" (609 mm), 40" (1016 mm), 49" (1244 mm), and 63" (1600 mm) tables.• Infinite-position moveable cross rails (except YV-1000) as well as tool changers. • Single vertical ram and standard column height.• Optional full contouring C axis with live milling is available.

• Suitable for demanding applications. • Available in table sizes from 40" (1016 mm to 177" (4495 mm).• Symmetrical base/column design with moveable cross rails.• Variable column heights/ram strokes are available to accommodate tall workpieces. • Optional C-axis features a dal spindle motor/dual pinion drive providing nearly zero backlash and accurate C-axis positioning repeatability.

● Johnford bridge mills are built extra heavy.

● Massive, FEA designed Meehanite castings.

● YZ axes feature square box ways coated with Turcite. ● X-axis table traverse via heavy duty Schneeberger roller linear ways. ● Comprehensive selection of machine sizes and capabilities (27 models available).● Machine X-Y-Z travels range from 36" × 36" × 30" to 196" × 157" × 32"/42".● W-axis travel optional on the largest machines. ● Spindle tapers include CT-40 (HSK-63) and CT-50 (HSK 100).● Spindle power, depending on the machine, ranges from 15 HP to 35 HP.● Most models have one-piece column and bridge castings. ● 5F (5-Face) models features 2-Position Automatic Attachment Changer for 5-sided machining of large parts. Upgrade to 3- or 4-position is available.

VTL-2000

YV-1600ATC

Model YV-1200ATC VTL-1600ATCTable size 49” 63”Ram to table max. 60” 63”Table load 11,000 lbs. 17,600 lbs.Spindle motor 60 HP (100 HP option)Spindle RPM 350 rpm 250 rpmATC 12 (16, 32, 60 option)Milling spindle motor 15 HPMilling spindle speed 2400 rpm

DMC-4100PH-5F

Model DMC-4100PH-5F

XYZ Travels 161.4” × 141.7” × 42”

Distance between Columns 94.4”

5-Face Head Rotation 360° by 5° increments

Table Working Surface 165.3” × 80.7”

Table Work Load 22,000 lbs.

Spindle Taper CAT-50

Spindle Motor 35 HP

Spindle Speed Vertical 6000 rpm

ATC 40 (60, 80, 120 optional)

Machine Weight (estimate) 148,500 lbs.

20

Also available…Large Column Travelling-Type Surface Grinders. Call us for more information.

Model KGS-250AHD KGS-1020AHD KGS-63AHD KGS-84AHDTable Working Surface (W × L) 8” × 18” 10” × 20” 12” × 24” 16” × 32”Longitudinal Travel 20.25” 23.25” 27.94” 36.25”Max Distance Spindle Center to Table 18.69” 19.25” 24.00” 23.62”Grinding Wheel Size (D × W × B) 8” × 1/2” × 1.25” 8” × 1” × 1.25” 14” × 1.5” × 5” 14” × 1.5” × 5”Wheel Speed 3480 rpm 3480 rpm 1740 rpm 1740 rpmGrinding Wheel Spindle 2 HP 3 HP 7.5 HP 7.5 HP

AUTOMATICSADDLE TRAVELLING-TYPE • Three axes automatic surface grinder with small footprint.• Cast iron base• Turcite-B laminated X & Y slide ways (model KGS-250AHD

with ball bearing table and D-2 slide ways)• CP4 preloaded super precision angular contact ball bearing spindle• Automatic incremental downfeed• Packaged with Electromagnetic Chuck, Overhead Parallel Dresser,

Magnetic Separate Coolant System, Rear Splash Guard and Table Splash Guard

AUTOMATIC SADDLE-TYPE The Production Man's GrinderThe Okamoto ACC-SA1 Series is a next generation MDI Control surface grinder that provides the robust design, ease of use and standard high performance features that today's production shop requires.

• Double-V table ways assure smooth accurate traciking.

• Programmable Dressing with Dress Compensation is standard.

• High-efficiency Shift/Plunge cycle for fast stock removal.

• User-friendly MDI touchscreen Control

• AC driven vertical feed with minimum increment of 0.00001"

• AC driven crossfeed feed with minimum increment of 0.0001"

• Teach function for Crossfeed Position

Model ACC 8-20SA1 ACC 12-24SA1 ACC 16-24SA1 ACC 16-32SA1 ACC 20-24SA1 ACC 20-40SA1

Table Working Surface (W × L) 8” × 20” 12” × 24” 16” × 24” 16” × 32” 20” × 24” 20” × 40”

Longitudinal Travel 25.6” 29.5” 29.5” 37.4” 29.5” 45.3”

Max Distance Wheel to Table 15.7” 13.6” 13.6” 21.5” 21.5” 21.5”

Magnetic Chuck (W × L) 8” × 20” 12” × 24” 16” × 24” 16” × 32” 20” × 24” 20” × 40”

Capacity incl. Chuck 440 lbs. 925 lbs. 925 lbs. 1,540 lbs. 1,540 lbs. 1,540 lbs.

Grinding Wheel Size (D × W × B) 8” × 1” × 1.25” 12” × 1.5” × 5” 12” × 1.5” × 5” 12” × 1.5” × 5” 12” × 1.5” × 5” 12” × 1.5” × 5”

Wheel Speed 3600 rpm 1800 rpm 1800 rpm 1800 rpm 1800 rpm 1800 rpm

Grinding Wheel Spindle 2 HP 5 HP 5 HP 5 HP 5 HP 5 HP

SURFACE GRINDERS

Surface, Profile, ID, OD and more… Okamoto has the widest range of top quality grinders.Call us for more information on Okamoto’s comprehensive line of grinders.

SURFACE GRINDERS

21


MODEL PCSAW430X

Cutting capacity round 1.18” – 16.93” (diameter)

Cutting capacity rectangle 16.93” × 16.93” (w × h)

Work load capacity 6,613 lbs.

Material index stroke 19.685”

Material index length 0.394” – 393.70”

Saw blade dimensions (L × T x W) 20’ × 0.063” × 2”

Blade speed 49 – 394 ft/min, Inverter

Blade control* Windows© CNC, hydraulic flow control valve with stepping motor

Saw blade motor 15 HP

Pulse cutting motor 1/8 HP

Machine dimensions (W × L × H) 112.2” × 83.2” × 90”

Table height 27.6”

Machine weight 10,361 lbs.

Order# AMA-PCSAW430X

LIST PRICE $184,050 USD

Amada PCSAW430X Pulse Cutting Band Saw

Other PCSAW models are availableto meet your most demanding cutting jobs.

Amada delivers high cutting rates without increased vibration with its PCSAW series Pulse Cutting Band Saws.Unwanted vibrations are eliminated by delivering controlled pulses to the blade.The pulses can be applied to the penetration force (single pulse) or to the longitudinal force (double pulse). This technology decreases cutting resistance while increasing blade life and cutting rates. Increased blade life is now guaranteed without sacrificing productivity.

Model Pulse Cutting Capability Round Cutting Capability Rectangle W × H

PCSAW330 Single 1.18” – 13” 13” × 13”

PCSAW530X/AX Single 1.18” – 20.87” 20.87” × 20.87”

PCSAW700 Double 28” 31.5” × 28”

PCSAW720 Single 28.3” 32” × 28”

*Model PCSAW430AX utilizes a servo motor control for cutting feed.F.O.B. City of Industry, California

Amada DYNASAW430/530Dynamic High-Performance CNC Band Saws

Model DYNASAW430 DYNASAW530

Cutting Capacity Round 1.18” – 16.93” 1.18” – 20.89”

Cutting Capacity Rectangle 1.18” × 1.18” – 16.93” × 16.93” 1.18” × 1.18” – 20.89” × 20.89”

Min remnant length 1.38” plus length of parts 1.38” plus length of parts

Blade Dimensions 17’5" × 1.5" × 0.05" 19’5" × 2" × 0.663"

Blade Drive 7.5 HP 10 HP

Blade Speed 49 – 394 FPM 49 – 394 FPM

Feeding Vise Stroke Length 27.6” 27.6”

Table Height 27.6” 27.6”

Order# AMA-DYNASAW430 AMA-DYNASAW530

LIST PRICE $105,350 USD $128,000 USD

Engineered Excellence.Production Proven.

F.O.B. City of Industry, California

● Newly engineered dual post design – Dynamic Frame – provides exceptional rigidity.● Operator-friendly CNC control has three cut modes (“standard”, “power” and “eco”) for maximum efficiency.● Double rollers reduce vibration for faster and quieter cutting, and improved blade life.● New saw blade frame design lessens the twist in the blade, reduces fatigue, leading to longer blade life.● Extended feed stroke (stroke length of 27.6”) makes material loading easier.● Auto trim cut function uses lasers to detect the material position, shortening run times.● New rear vise design reduces remnant length, improving the yield of every bar cut.

21 CALL YOUR THOMAS SKINNER MACHINE TOOL REPRESENTATIVE 1-800-567-2131

HA 250W HFA 400W

Extremely Rigid Construction. Economically Efficient and Productive.Precision Cutting. Reliable. Longer Blade Life.

Meet the CM II-DG Series Carbide-Tipped Circular Saw Machines

HA/HFA FEATURES● Hydraulically driven chip conveyor● Idler wheel motion detection● Blade breakage switch● Hydraulic blade tensioning● Main split vise (HA250W)● Main and rear vise (HA400W)● Pressure/flow feed control● Variable blade speed drive● Powered chip brush● HA: 9 times index● HFA: automatic multi-indexing● HA: analog control● HFA: PLC control

ADDITIONAL HFA MODEL NC FUNCTIONS

● Auto Trim Cut● Hour Meter● Blade Deviation Monitor● 99 Cut-Off Lengths from the Same Bar● Number of Pieces Required● Number of Pieces Cut● Alarm History

MODEL HA250W HA400W HFA 250W HFA 400W

Cutting Capacity Round Ø1.18”~10” Ø1.18”~16.54” Ø0.5”~10” Ø0.5”~16.54”

Cutting Capacity Rectangle 11.8”x10” 16.3”x16.3” 12”x10” 16.3”x16.3”

Material Index Stroke 15.75” 19.6” 15.75“ 19.6”

Material Index Length 142” 177” 999.999” 999.999”

Blade Size: (LxTxW) 11’6”x0.042”x1-1/4” 15’x0.050”x1-1/2” 11’6”x0.042”x1-1/4” 15’x0.050”x1-1/2”

Blade Motor 5 HP 7.5 HP 5 HP 7.5 HP

Machine Weight 3,087 lbs 4,851 Ibs 3,307 lbs 4,851 Ibs

Order # AMA-HA250W AMA-HA400W AMA-HFA250W AMA-HFA400W

LIST PRICE $31,300 USD $52,850 USD $39,400 USD $64,700 USD

The CM II-DG is the latest evolution of Amada carbide circular sawing saw machines and incorporates the latest developments in carbide circular metal sawing. The CM II-DG Series features the new DYNA GUIDEmechanism – a moveable saw blade guide set closest to the start point of a cut leading to significantly improved support and rigidity of a circular saw blade when it makes initial contact with the surface of a workpiece.

● Stable, high-speed and high-precision cutting.● Reduced circular saw vibration.

MODEL CM II-75DG CM II-100DG

Cutting Capacity Round 0.39” – 3.00” 0.79” – 4.00”Cutting Capacity Rectangle 0.39” × 0.39” – 2.55” × 2.55” 0.79” × 0.79” – 3.15” × 3.45”Saw Blade Dimensions (OD × Bore × T) 11.22” × 1.57” × 0.08” 14.17” × 1.57” × 0.10”Material Index Stroke 28.1” 28.3”Material Index Length 0.39” – 393.70” Multiple IndexingRemnant Length 1.97” plus length of partsEnd Trimming Length 0.39” – 3.9”Blade Speed 50 – 180 rpm, by InverterSaw Blade Motor 10 HP 14.75 HPTable Height 35.43” 35.43”Machine Weight 4,410 lbs. 5,510 lbs.

HA/HFA Automatic Horizontal Band Saw

F.O.B. City of Industry, California

21CALL YOUR THOMAS SKINNER MACHINE TOOL REPRESENTATIVE 1-800-567-2131CALL YOUR THOMAS SKINNER MACHINE TOOL REPRESENTATIVE 1-800-567-2131


22 23

CALL YOUR THOMAS SKINNER MACHINE TOOL REPRESENTATIVE 1-800-567-2131CALL YOUR THOMAS SKINNER MACHINE TOOL REPRESENTATIVE 1-800-567-2131CALL YOUR THOMAS SKINNER MACHINE TOOL REPRESENTATIVE 1-800-567-2131



Horizontal MiteringS330/2, S330/2-HV

Optional hydraulic vise (model S330/2-HV) clamps and holds the workpiece securely. The vise is operated by a selector switch located on theoperator control panel.

● Swivel head● High speed● Horizontal● 3 HP● 60-Degree to the rear, 45-degree to front● Hydraulic vise (model S330/2-HV)

Model S330 is also available in step pulley and fully automatic models.Other Marvel horizontal mitering saws are also available in largercutting capacities.

*Pictures may include optional equipment.

Capacity Rectangular (H × W) Round

90° 12” × 18” 13”

45° 11” × 12” 13”

60° 11” × 8” 9.5”

Blade Dimensions 13’ 6” L × 1” W × 0.035” T

Blade Drive 3 HP

Machine Vise Manual Quick Position with Cam Lock (S330/2) Hydraulic (S330/2-HV)

Coolant Tank Capacity 6 Gallon Coolant Tank (Built in Coolant System)

Net Machine Weight 1,800 lbs.

Machine Dimensions 96” L × 85” W x 57” H

Order# MAR-S3302 MAR-S3302HV

LIST PRICE $16,000 USD $18,140 USD

BAND SAWS

F.O.B Oshkosh, WI

Marvel classic grey available on request.

Horizontal Post-Style

*Pictures may includeoptional equipment.

F.O.B Oshkosh, WI

● Hydraulic Full Stroking Vise Jaws

● Automatic Chip Removal

● Touch Screen Control Panel

● Hydraulically controlled blade tension

● Out-of-Stock Switch● Fast Approach

● Combination roller bearing and carbide blade guides

PA260 MPCPA360 MPCPA460 MPC

HEAVY-DUTY. DUAL COLUMN. PROGRAMMABLE CONTROL.

Expect Quality. Demand Performance.

BAND SAWS

Marvel classic greyavailable on request.

Capacity Rectangular (H x W) Round

PA260 10.25” x 12” 10.25”

PA360 14” x 14” 14”

PA460 20" x 18" 18"

Model PA260 MPC PA360 MPC PA460 MPC

Blade Size 1.25” x 0.042” x 12’11” 1.25” x 0.042” x 14’6” 1.50” x 0.50" x 17’11”

Blade Speed 65-330 SFPM 70-330 SFPM 70-330 SFPM

Blade Drive 5 HP 5 HP 10 HP

Shuttle Stroke 16” 20” 20”

Order# MAR-PA260MPC MAR-PA360MPC MAR-PA460HDMPC

LIST PRICE $37,340 USD $44,060 USD $62,030 USD

23CALL YOUR THOMAS SKINNER MACHINE TOOL REPRESENTATIVE 1-800-567-2131

World’s Most Popular Vertical Tilt-Frame Band SawVT4555 (8-Mark-II)

● Miter Cutting… Column and blade tilt up to 45° right and left of vertical. Work always stationary.● Quick-Action Vise… Maximum opening 18”. Jaws can be shifted to either right or left side of blade. Jaws are 6” high, 12” wide.● Automatic Stops… Adjustable stops can be pre-set to stop advance and return of blade and to stop motor at any location within the 18” travel of the blade.● Front-Mounted Speed Control… Allows blade speed to be adjusted from operator’s control station.● Optional Column…6” longer than standard, providing increased vertical capacity (factory order).● Loads more features…!

Capacity 90° 18" x 22"

Capacity 45° 18" x 12.75"

Tilt 0 to 45° Left and Right

Drive Motor 5 HP

Blade Size 14'6 x 1" x 0.035"

Blade Speed Range 50-450 fpm

Order# MAR-8MII

LIST PRICE $30,400 USDF.O.B Oshkosh, WI


Vertical Tilt-Frame

● Electric tilt mitering 60° left and right● Patented Cam Link Tilt design offers smooth, rapid and accurate tilting for a wide array of cutting needs. ● Standard 3° canted column reduces cutting time on structural shapes. PC3 Programmable Control is user-friendly with automatic settings for speed and feed and includes Jammed Blade Protection.● 48” Servo Driven Automatic Index comes standard for faster indexing, improved positioning controls and improved accuracy while greatly reducing cycle times.● Optional extended feed systems are available for 8, 13 and 18 foot bar feed lengths.

VT5063 Series (2000 Series)

HIGH-PRODUCTION. VERSATILE. LARGE CAPACITY 60° MITERING

Capacity Rectangles Rounds

Nominal 20" × 25" 20"

Blade at 45° 20" × 17" 17"

Blade at 60° 20" × 11.25" 11.25"

Also available in semi-automatic versions: Models VT5063M with 1.25” blade and VT5063MW with 1.5” blade.

BAND SAWS

BAND SAWS

23

(2125APC)

(2150APC) Blade Size 1.25” x 0.042” x 17’6 ” 1.5” x 0.05” x 18’2” Blade Drive 7.5 HP 10 HP Blade Speed 30 to 500 FPM Infinitely Variable Table Height 38” 40”

VT5063S


All-Mechanical Design Cast Iron Construction Large Adaptable Work Table

Model VT5063SW

CALL YOUR THOMAS SKINNER MACHINE TOOL REPRESENTATIVE 1-800-567-2131 CALL YOUR THOMAS SKINNER MACHINE TOOL REPRESENTATIVE 1-800-567-213124 25


F.O.B. Woodstock, Ontario

S-20 SeriesHorizontal Pivot Style Band Saws

H-SeriesHorizontal Band Saws

Versatile, miter-cutting, scissors style machines designed for multiple medium duty applications. Available in manual, semi-automatic, and fully-automatic models. Semi-automatic and automatic models feature environmentally-friendly“On-Demand” hydraulics. The S-20A model features a very accurate and quick material indexing ball screw.

Horizontal, guillotine saws designed for multi-shift,high-production environments. Available in fully-automatic modes of operation with cutting capacities up to 32”.Models H-22A, H-28A and H-32A available with Canted Head option (change in capacity and table height). Models H-18A, H-22 and H-28A available with long bar feed option. Cutting capacities 40” and over are available in semi-automatic modes of operation.

F.O.B. Woodstock, Ontario

Capacity Rectangular (h × w) Round

90° 13” × 18” 13”

45° 13” × 10-3/4” 12”

30° 13” × 7-3/4” 8-1/2”

Model S-20 Manual

S-20P Semi-Automatic

S-20A Fully Automatic

Blade Dimensions 1” × 14’10” 1” × 14’10” 1” × 14’10”

Blade Drive 3 HP VFD 3 HP VFD 5 HP VFD

Automatic Multi-Indexing - - 0” – 27” single stroke

Coolant Capacity 6 gallons 6 gallons 12 gallons

Net Weight 2,200 lbs. 2,500 lbs. 3,800 lbs.

Machine Dimensions 75” L × 92” W × 52” H 75” L × 92” W × 52” H 86” L × 93” W × 52” H

List Price $16,500 $20,500 $39,500

Model H-18A H-22A H-28A H-32A

Rectangular Capacity H × W 18” × 18” 22” × 22” 28” × 28” 32” × 32”

Round Capacity 18” 22” 28” 32”

Blade Dimensions 1-1/2” × 19’2” 2” × 22’6” 2” × 25’ 2-5/8” × 30’4”

Blade Speed 30 – 350 SFM 40 – 300 SFM 40 – 300 SFM 40 – 300 SFM

Blade Drive 10 HP VFD 10 HP VFD 10 HP VFD 20 HP VFD

Automatic Multi-Indexing 0” – 34” single stroke 0” – 34” single stroke 0” – 34” single stroke 0” – 34” single stroke

Net Weight 8,500 lbs. 12,500 lbs. 18,000 lbs. 19,500 lbs.

List Price $78,000 $88,900 $125,000 $157,900

CH-530X1700

STANDARD FEATURES:• 2-axis Mitutoyo DRO• Multifix “B” toolpost (holders extra)• Bison 3-jaw chuck

(CH-400 - 8”), (CH-530 - 10”)• Bison 4-jaw chuck on

(CH-400 - 10”), (CH-530 - 12”)

CH SERIES

CHD SERIES

MODEL CH-400X800 CH-400X1100 CH-530X1700Swing over bed 16” 21”Distance between centres 31.5” 44” 67”Spindle bore 2” 3”Type of spindle nose D1-6 D1-8Spindle speeds (16) 35 - 1,800 RPM (12) 29 - 1,650 RPMTaper in tailstock quill 4MTSpindle drive motor 7-1/2 HP/220V/3-Ph/60 HzSpace required (L x W x H) 79" x 39" x 55” 90" x 39" x 55” 114" x 44" x 55”Net weight (lbs) (approx) 3,200 3,400 4,200ORDER # CHI-CH400800T CHI-CH4001100T CHI-CH5301700TLIST PRICE $25,995 $27,195 $34,995SALE PRICE $23,495 $25,495 $31,795

STANDARD FEATURES:• 2-axis Mitutoyo DRO• Multifix “C” toolpost (holders extra)• Bison 12" 3-jaw chuck• Bison 16" 3-jaw chuck • Taper attachment

MODEL CHD-560X2300 CHD-660X3000Swing over bed 22” 26”Distance between centres 87-1/4” 118”Spindle bore 4-1/8”Type of spindle nose D1-11Spindle speeds (12) 13 - 1,200 RPMTaper in tailstock quill 5MTSpindle drive motor 15 HP/220V/3-PH/60 HzSpace required (L x W x H) 145” x 47”-1/4 x 59” 177” x 47”-1/4 x 59”Net weight (lbs) (approx) 6,200 7,000ORDER # CHI-CHD5602300T CHI-CHD6603000TLIST PRICE $52,795 $57,695 SALE PRICE $49,995 $51,995

CHD-560X2300

KMR SERIES

MODEL KMR-700S KMR-1100S KMR-1600DHOperation Manual HydraulicColumn diameter 7-7/8” 11-13/16” 15-3/8”Spindle head longitudinal travel 20-1/2” 29-3/4” 48-1/2”Morse taper spindle 4MT 5MTSpindle speed ranges (6) 88 - 1,500 RPM (9) 49 - 1,524 RPM (12) 88 - 1,500 RPMMotor for clamping device Manual 1 HPWorking capacity in drilling steel 1-1/2” 1-3/4” 2-1/4”Net weight (lbs) 2,557 5,235 10,557ORDER # KAO-KMR700DS KAO-KMR1100S KAO-KMR1600DHLIST PRICE $14,995 $25,995 $47,795 SALE PRICE $13,495 $22,995 $42,995

HIGH SPEEDPRECISION LATHES

• Taper attachment• Complete coolant system• Steady rest 6"• Splash guard

MID-SIZE PRECISIONLATHES

• Complete coolant system• Steady rest 10" • Splash guard• Rapid traverse (longitudinal)

RADIAL DRILLING MACHINES

F.O.B. Thomas Skinner Warehouse Location





26 27

Mitutoyo KA 3-axis DRO(standard)

Shown with optional chip tray

THE BEST VERTICAL MILL IN THE INDUSTRY.DURABLE AND TROUBLE-FREE.

LC-20 SERIES

VERTICAL & HORIZONTAL• 59.0” × 11.8” Working Surface• 41.0” × 12.6” × 18.5” Travels• ISO 40 Taper• Independent 5 HP Vertical, 7.5 HP Horizontal Motors• Variable Speed Vertical Spindle• 3-Axis Power Feed and Rapid Traverse Table• Power Drawbar• Mitutoyo 3-Axis Digital Readout

• Heavy-Duty Construction• 5-Stations• Completely Integrated• Single & Dual Cylinder Machines• Most Versatile!

MODEL CS-G450B

• 56” x 10” Working Surface• 36” x 16.3” x 18” Travels• ISA 40 NT Spindle Taper• Heavy Duty Variable Speed Head• 5 HP Vertical Spindle Motor• 5 HP Horizontal Spindle Motor (LC-20VHS)• Power Feed and Rapid on Longitudinal Travel• Power Rapid Travel on Knee• Air Power Drawbar• Mitutoyo 3-Axis Digital Readout System

• 50” × 9” Working Surface• 36” × 12” × 16” Travels• R8 Spindle Taper

MILLING MACHINE

IRONWORKERS

Mitutoyo KA 3-axis DRO

LC-20VSG

LC-20VHS

ORDER # LON-LC112VSLLIST PRICE $13,995SALE PRICE $12,795

ORDER # LON-LC20VHSLIST PRICE $32,795SALE PRICE $29,995

ORDER # LON-LC20VSGLIST PRICE $25,495SALE PRICE $23,995

TURRET MILLING MACHINE HEAVY DUTYMILLING MACHINES

MODEL LC 1-1/2VSL

ORDER #CHU-CSG450BF.O.B. Thomas Skinner Warehouse Location


F.O.B. Thomas SkinnerWarehouse Location

Model MSIW66S MSIW60D MSIW71D MSIW93D MSIW126D/DX MSIW192DXPower (Pressure) 66-Ton 60-Ton 71-Ton 93-Ton 126-Ton 192-Ton

Drive Motor 7-1/2 HP 10 HP 15 HPThroat Depth 8” 10” 12” 14” D 14”/ DX 24″ 24-9/16”

MSIW71D

MSIW66S



Model I-28 also available in 575 Volts.F.O.B. Thomas Skinner Warehouse Location

HIGH-ENDDRILLING

MACHINES

Drill GuardOrder# IMA-TB2552LIST PRICE: $560,00

I-28

MODEL I-28 I-28MDrilling capacity 1-1/4”Automatic feed - .004, .006, .012”Spindle speeds 130 - 3,480 RPM

Motor 1.4 HP/1.85 HP230V, 3-Ph, 60 Hz

1.4 HP/1.85 HP230V, 3-Ph, 60 Hz

Spindle taper 3MTWeight (lbs) 400 433ORDER # IMA-I28220V IMA-I28M220VLIST PRICE $5,195 $6,395SALE PRICE $4,395 $5,995

LIST PRICE $58,995

CALL YOUR THOMAS SKINNER MACHINE TOOL REPRESENTATIVE 1-800-567-2131 29

OUR PRODUCT LINESABRASIVES & FILES3MCarborundumKlingsporSimondsTyrolit

CNC MACHINE TOOLS

COOLANT AND COOLANT SYSTEMS

CUTTING TOOLS

BAND SAW BLADES

CUTTING TOOLS CONTINUED

BAND SAW MACHINES

CMM & VISION MEASURING MACHINES

L.S. Starrett

AMADA MARVEL, INC.

R

GeminisJohnfordMitsubishi EDMSoraluceTsugamiYou Ji

Helical SolutionsKEOLMT FetteMorseRobb JackRock RiverSowaSTMTaylor ToolTool-FloVardexYG-1

DRILLING MACHINESIMAKao Ming

GRINDERSBaldorKentOkamoto

LATHESAdvance

MACHINE TOOL ACCESSORIESHaas5th AxisAbbott BenzBig KaiserBisonCarr LaneChickChipBlasterDorianExsysH&RHaimerJacobsJergensKAR IndustrialKitagawaKME CNCKurtLNSLyndex-NikkenMidaco

AdventAllied MachineCole CarbideDormer PrametDumont

EZ Burr

GuhringHarvey Tool

AnchorlubeKeller ProductsZebra Skimmers

MACHINE TOOL ACCESSORIES CONTINUED

MILLING MACHINESFirstFortworth

PRECISION TOOLS & INSTRUMENTS

L.S. StarrettSTM

SAFETY EQUIPMENT3MHoneywell

TOOLROOM MANAGEMENT & VMICribmasterIscarKennametalOSGStor-LocTitexTungaloyWalter

NexJen TechnologiesMP SystemsMultifix SuisseQPMRego-FixRenishawRoyalSamchullySchunkSIC MarkingSMW-AutoblokSowaTechniksTe-CoTsudakoma

www.thomasskinner.com

Shows optional drill guard.

MACHINE TOOL BUYING GUIDE

VANCOUVER 13880 Vulcan Way Richmond, BC V6V 1K6604-276-2131

EDMONTON9407 - 51st AvenueEdmonton, AB T6E 4W8780- 435-3928

CALGARY4540 - 50th Avenue SECalgary, AB T2B 3R4403-720-3201

WINNIPEG820-D Berry StreetWinnipeg, MB R3H 1H2 204-925-9300

Central Switchbord 1-800-567-2131

Customer Service / Inside Sales 1-866-999-3117Service & Parts

1-866-779-2131Visit our website www.thomasskinner.com

PRICES IN EFFECT SEPTEMBER 1, 2021 THROUGH MARCH 31, 2022 UNLESS OTHERWISE STATED. SALE PRICES ARE VALID ON STOCK MACHINES ONLY WHILE AVAILABLE. PRICES MAY ALSO BE SUBJECT TO CHANGE BY MANUFACTURER WITHOUT NOTICE. All machines are F.O.B. as shown. We have tried to be as accurate as possible, however, there may be some errors in text, specifications or price. Please confirm text, specifications and price with your Machine Tool Representative. Pictures of items may not be exactly as shown. Errors and omissions excepted (E&OE).

machine tool buying guide

Documents