machines for land reclamation and watercourse maintenance

Quality & Tradition since 1976

MACHINES FOR LAND RECLAMATION AND WATERCOURSE MAINTENANCEFORESTRY AND AGRICOLTURAL EQUIPMENTS


MISSION

THE MISSION OSMA IS TO SATISFY THE DEMANDS OF HIS OWN CLIENTS, SIMPLIFYING THEIR JOB BEING IMPROVING THE PRODUCTIVITY, FROM SEVENTY UNTIL TO NEXT CHALLENGE

1980 1990

2000

2009

1970


THE PRODUCTSA LINE - SHREDDERS FOR TRACTORSDHSE PAG.6DHBA PAG.7DHFH - FRONTALI - PAG.8DHLE PAG.9DHL PAG.10DHLI PAG.11

B LINE - HYDRAULIC HEDGE CUTTER ARMSDHE - Agricoltural use PAG.13DHA - Light professional use PAG.14DHAS - Light professional use with 2nd telescopic arm

PAG.15

DHPS - Professional use with hyd.extension PAG.16

DHP/AV - with positionable hydr.arm PAG.17DHIS -Heavy duty series PAG.18-19

C LINE - FORESTRY MULCHERSTLPF PAG.21TLPF-UX PAG.22TPF PAG.23TPF-UX PAG.24

D LINE - FLAIL HYDRAULIC MOWERSTE-DXL PAG.26TE-DL PAG.27TE-DP PAG.28TE-CL PAG.29

TE-CP PAG.30


E LINE - FORESTRY HYDRAULIC MOWERSTFXL PAG.32TFL PAG.33TFL-UX PAG.34TFM PAG.35

TFM-UX PAG.36TFS PAG.37TFS-UX PAG.38

TP-R PAG.39

TFL/R e TFM/R PAG.40

THE PRODUCTS

F LINE - ATTACHMENTS FOR SHRUB ARMS ANDFOR MIDI-EXCAVATORSTNA PAG.42TP-TPC PAG.43TPCT PAG.44RF - ROTOMILLING CUTTERS PAG.45FF - ROTOVATOR ACQUATIC ROTOCUTTER PAG.46HKL - WEED CUTTING BUCKET PAG.47TS - TREE SHEARS PAG.48TR - CUTTER BAR PAG.49BF/SCH - BARRE FALCIANTI PER POTATURE PAG.50BD - CUTTER DISC PAG.51

G LINE - BRUSH MOVER ATTACHMENT FOR SKEED STEERSS-CL PAG.53SS-TFF PAG.54SS-TFF UX PAG.55

H LINE - MOWING BOATSS1F PAG.57MF PAG.58


A LINE - SHREDDERS FOR TRACTORSSERIES

DHSE

DHBA

DHF/H

DHLE

DHL

DHLI


THE PRODUCTSDHSE REAR SHREDDERS agricoltural use on small tractor

Agricultural back shredders, for small firms, proper for cutting grasses, small bushes, rests of prunings of vineyards, with clubs rotor for cut up to cm.3.For tractors from 30 to 60 hp.

STANDARD EQUIPMENT:170mm rear adjustable roller. Rotor with P Type knives, stronger frame built with very high quality steel (DOMEX 700-SS355), double chassis and counter-blades.

A LINE - SHREDDERS

Model Code Cutting wide cm.

Exterior width cm.

Weight kg. HP Tractor Belt nrs. Rotor Mod. Hammer nr.

DHSE 150 14015 150 164 325 40-45 3 P 16

DHSE 180 14018 180 194 365 45-50 4 P 18

DHSE 200 14020 200 214 410 50-60 4 p 20

Hammer type Model Rotor type - Hammer nr.

light hammer for grasses, small bushes max 3 cm.size

DHSE 150 P - 16DHSE 180 P - 18DHSE 200 P - 20

Cod. ZP00003 - Rotor P


THE PRODUCTSDHBA REAR SHREDDERS agricoltural use

Agricultural back shredders, for small firms, proper for cutting grasses, small bushes, rests of prunings of vineyards, with clubs rotor for cut up to cm.5.For tractors from 50 to 90 hp.

STANDARD EQUIPMENT:170mm rear adjustable roller. Rotor with P Type knives, stronger frame built with very high quality steel (DOMEX 700-SS355), double chassis and counter-blades..


Exterior width cm.

Weight kg.

HP Tractor Belt nrs. Rotor Mod. Hammer nr.

DHBA 160 15016 160 180 665 50-60 4 N 12

DHBA 180 15018 180 200 700 60-70 4 N 14

DHBA 200 15020 200 220 745 70-80 4 N 16

DHBA 230 15023 230 248 790 70-90 4 N 16

Utensili da taglio Model Rotor type - Hammer nr.

DHBA 160 N - 12

DHBA 180 N - 14

DHBA 200 N - 16

Cod. ZP00006 - Rotor N DHBA 230 N - 16

A LINE - SHREDDERS


THE PRODUCTSDHF/H FRONT SHREDDERS FOR TRACTORS - PTO DRIVE SHAFT 1000 g/min.

-Professional Front Heavy-Shredders for grass, bushes, branches, with knives or hammers, for cutting vegetation up to 7/8 cm.-Ideal for general clearing of uncultivated fields, green areas, under-wood, etc..-For tractor from 80 to 120hp.

STANDARD EQUIPMENT:Three point linkage, cat. II. Right-side hydraulic shift system .Frontal opening hood with cylinder. 170mm rear adjustable roller. 80hp gear box, for PTO drive shaft 1000 rpm.Rotor with knives (F), or hammer (G).Stronger frame built with very high quality steel (DOMEX 700-SS355), double chassis and counter-blades.

NOTES:Drive shaft 1”-3/8 z6, free wheel.4 Quick release couplins, for cylinders controlling.

A LINE - SHREDDERS


Exterior width cm.

Weight kg. HP Tractor Belt nrs. Rotor Mod.

DHF/H 190 13019 190 205 730 80-90 5 F-G

DHF/H 220 13022 220 235 820 100-110 5 F-G

DHF/H 240 13024 240 255 910 110-120 5 F-G

Tools heavy hammer for grasses,

bushes max size 8 cm.Knifes for grasses, bushes,

reeds max size 6 cm

Cod. ZP00002 - Rotor G Cod.ZP293020 - Rotor F

Model Rotor - Hammer type - nr.

Rotor - Knifestype - nr.

DHF/H 190 G - 16 F - 64

DHF/H 220 G - 20 F - 80

DHF/H 240 G - 20 F - 80


THE PRODUCTSDHLE CENTRAL AND SIDE SHREDDERS FOR TRACTORS - agricoltural use -

Agricoltural shredder back and side, with hammer rotor, suited to cut grasses, bushes until cm.4 Tractor power required: from 40 to 80 HP

STANDARD EQUIPMENT:Three point linkage, cat. II., External Gear box, antishock mechanic system with springs.Rotor with hammers, 170mm rear adjustable roller. 80hp gear box, Frontal opening hood.

OPTIONALS: Automatic antishock system Shaft with constant velocity joints.

A LINE - SHREDDERS


Exterior width cm.


DHLE 130 11513 130 160 390 40-50 3 P

DHLE 150 11515 150 180 430 50-70 3 P

DHLE 180 11518 180 210 480 60-80 4 P

Tools Model Rotor type - Hammer nr.

light hammers for grasses, bushes max size 3 cm.Cod.ZP00003 Rotor P

DHLE 130 P - 16

DHLE 150 P - 18

DHLE 180 P - 20



bushes max size 8 cm.Knifes for grasses, bushes,

reeds max size 6 cm


DHL REAR AND SIDE SHREDDERS - PROFESSIONAL USE -

Rear and side shredders, in line and offset works, rotor with knives or hammers, for grass, bushes, branches up to 8 cm. Ideal for farmers, contractors, for clearing ditches, banks of water-course, road side banks , areas in general.Tractor power required: from 70 to 130 HP

STANDARD EQUIPMENT:Three point linkage, cat. II. - 170mm. Adjustable rear roller - External Gear box for PTO 540 RPM. Heavy-duty rotor with knives or hammers. Drive shaft gr.6, 1”-3/8” Z6. Oil flow regulator for hydraulic side-shift cylinder.

Hydraulic cylinder for head positioning in single way. Stronger frame built with very high quality steel (DOMEX 700-SS355), and counter-blades.“SRS”, antishock valve, OSMA, with springs system.


Exterior width cm.


DHL 160 11016 160 205 670 70-80 3 F-G

DHL 190 11019 190 240 760 80-100 5 F-G

DHL 220 11022 220 260 850 100-130 5 F-G

THE PRODUCTS A LINE - SHREDDERS



DHL 160 G - 12 F - 48DHL 190 G - 16 F - 64

DHL 220 G - 20 F - 80



bushes max size 8 cm.Knifes for grasses, bushes, reeds

max size 6 cm


DHLI REAR AND SIDE SHREDDERS WITH HYDRAULIC TRANSMISSION - HEAVY USE --Heavy-duty in-line and offset shredders, for grass, bushes, branches, rotor with kinves or hammers, Ideal for contractors, for clearing ditches, banks of water-course, road side banks, hard jobs where the standard machines can’t works.-HYDRAULIC HIGH POWER TRASMISSION -Tractor power required: from 90 to 130 HP

STANDARD EQUIPMENT:Three point linkage, cat. II.170mm. Adjustable rear roller.Heavy-duty rotor with knives (F) or hammers (G).Oil flow regulator for hydraulic side-shift cylinder. 140 LT. oil tank. Oil cooler 12 vdc.

Piston pump and piston motor for high performance. 75 hp Rotor Cutting Power.Gear box 75hp, to fix directly on the PTO tractor at 540rpm.Hydraulic valve, double effect, 1”, to control the oil from the piston pump to the piston motor. This valve is controlled by theoperator, trought a cable, fixed into the cab.Stronger frame built with very high quality steel (DOMEX 700-SS355).


Exterior width cm.


DHLI 160 12016 160 190 950 90-100 5 F-G

DHLI 190 12019 190 220 1030 100-120 5 F-G

DHLI 220 12022 220 250 1120 110-130 5 F-G

THE PRODUCTS A LINE - SHREDDERS



DHLI 160 G - 12 F - 48DHLI 190 G - 16 F - 64

DHLI 220 G - 20 F - 80


B LINE - SHRUB ARMSSERIES

DHE

DHA

DHAS

DHP/AV

DHIS

DHIS PLUS


DHE SHRUB ARM - AGRICULTURAL USE -

-Ligth shrub arm, for farmer uses, with 105cm. flail mower, and rotor with knife A, to cut grass and bushes up to 5 cm. Tractor power required: from 50 to 90 HP

STANDARD EQUIPMENT:Three point linkage, cat. II. PTO 540 rpm. 140mm. adjustable rear roller. Drive shaft gr.4, Locking tie rods,Reversible rotor rotation, with kinfe type A (articulated Y knives). HP on the rotor 40hp. Hydraulic breakaway with hydr.valve.

Cables control with 4 levers, gear pump and motor. Direct trasmission on the flail rotor.Floating system on the first arm and on the mower.Flail mower 105cm (TNA 100 mod.) with front chains and rear rubber protections.

Model Cod Arm lenght Transport size cm.

Weight kgs. Tractor po-wer HP

Rotor speed rpm/1”

Mower + Rotor mod.

DHE 350 21035 350 160 490 40-60 2800 TNE 80 + O

DHE 400 21040 400 160 660 50-60 2800 TNE 80 + O

DHE 480 21048 480 175 720 70-80 2600 TNA 100 + A

DHE 580 21058 580 175 790 80-90 2600 TNA 100 + A

THE PRODUCTS B LINE - ARMS

NOTE:Normally on the TNA flail mower is fitted the A rotor, but it is available also this rotor:-Rotor type B, to cut grass and bushes up to 3cm. -Rotor type C, to cut bushes and branches up to 4cm.(no extra costs)OPTIONALS:-Oil cooler -Rear tail lights -Mower head cm.120 (TNA120) -Mower head hydraulic pivoting for 90°

Multi purpose knifes for grass and bushes max size 3 cm.Cod.ZP 293016Rotor A - standard -

Multi purpose “Y” knifes for grass, bushes and shrubsmax size 4 cmCod.ZP 293003Rotor B - optional -

Multi purpose “spatu-la” knifes for grass, bushes and woodmax size 5 cmCod. ZP137001Rotor C - optional -

Multi purpose “Y” knifes for grass, bu-shes max size 2 cm.Cod.ZP322008std on DHE 350-400




Multi purpose “spatu-la” knifes for grass, bushes and woodmax size 5 cmCod. ZP137001Rotor C - optional

DHA SHRUB ARM - SEMI PROFESSIONAL USE -

Semi-professional shrub arm, for farmer works and road-side banks, for grass, bushes and branches, with 105 cm. flail mower, and rotor with knife A to cut up to 4/5cm.Tractor power required: from 70 to 100 HP

STANDARD EQUIPMENT:Three point linkage, cat. II., PTO 540 rpm, Drive shaft gr.4, Locking tie rods,140mm adjustable rear roller.Pivoting arm frame with hydraulic cylinder , Hydraulic breakaway with hydr.valve.

Reversible rotor rotation, with kinfe type A (articulated Y knives). On the rotor 48 hp.Cables control with 4 levers, gear pump and motor. Direct trasmission on the flail rotor.Floating system on the first arm and on the mower.Flail mower 105cm (TNA 100 mod.) with front chains and rear rubber protections.

Model Cod Arm lenght Transport size cm.

Weight kgs. Tractor po-wer HP

Rotor speed rpm/1”

Mower + Rotor mod.

DHA 500 22050 510 195 820 70-80 2700 TNA 100+A

DHA 600 22060 610 195 910 80-90 2700 TNA 100+A

DHA 700 22070 710 195 1020 90-100 2700 TNA 100+A

THE PRODUCTS

NOTE:Normally on the TNA flail mower is fitted the A rotor, but it is available also this rotor:

-Rotor type B, to cut grass and bushes up to 3/4cm. -Rotor type C, to cut bushes and branches up to cm 5.OPTIONALS:-Oil Cooler -Rear tail light -Mower head cm.120 (TNA120) - Mower head hydraulic pivoting for 90° -Low pressure controls and ergonomic Joystick

B LINE - ARMS





DHAS SHRUB ARM - SEMI PROFESSIONAL USE - WITH TELESCOPIC ARM

Semi-professional shrub arm, for farmer works and road-side banks, for grass, bushes and branches, with 105cm. flail mower,and rotor with knife A, to cut up to 4/5cm, with telescopic device on the second arm.Tractor power required: from 70 to 120 HP

STANDARD EQUIPMENT:Three point linkage, cat. II., PTO 540 rpm, Drive shaft gr.4, Locking tie rods, 140mm adjustable rear roller.Pivoting arm frame with hydraulic cylinder , Hydraulic breakaway with hydr.valve.

Reversible rotor rotation, with knives type A (articulated Y knives). Rotor power 48hp. Cables control with 5 levers, gear pump and motor. Direct trasmission on the flail rotor. Floating system on the first arm and for mower.Telescopic extension 90cm (DHAS 600), 110cm (DHAS700), 130cm(DHAS800)Flail mower 105cm (TNA 100 mod.) with front chains and rear rubber protections

Model Code Arm lenght cm.

Telescopi ext. cm.

Transport size cm.

Weight kg. Tractor HP Rotor rpm/1”

Mover + Rotor mod.

DHAS 600 23060 620 90 195 950 70-80 2700 TNA 100+A

DHAS 700 23070 720 110 195 1060 80-100 2700 TNA 100+A

DHAS 800 23080 820 130 195 1190 110-120 2700 TNA 100+A

THE PRODUCTS

NOTE:Normally on the TNA flail mower is fitted the A rotor, but it is available also this rotor:

-Rotor type B, to cut grass and bushes up to 3/4cm. -Rotor type C, to cut bushes and branches up to cm 5.OPTIONALS:-Oil Cooler -Rear tail light -Mower head cm.120 (TNA120) - Mower head hydraulic pivoting for 90° -Low pressure controls and ergonomic Joystick

B LINE - ARMS


DHPS SHRUB ARM - PROFESSIONAL USE -

Semi-professional shrub arm, for farmer works and road-side banks, for grass, bushes and branches, with 120cm. flail mo-wer, mod. TP 120 (professional) and rotor with knife A, to cut up to 6/7cm, with telescopic device on the second arm.Tractor power required: from 90 to 130 HP

STANDARD EQUIPMENT:Three point linkage, cat. II., PTO 540 rpm, Drive shaft gr.4, Locking tie rods,140mm adjustable rear roller. Flail mower mod. TP 120, with rotor type A.

Pivoting arm frame with hydraulic cylinder , Hydraulic breakaway with hydr.valve. Reversible rotor rotation, with knives type A (articulated Y knives). Rotor power 58 hp. Cables control with 5 levers, oil cooler, rear tails light, Cast iron double-gear pump and motor, gear box with 65hp.Floating system on the first arm and on the mower.Telescopic extension 90cm (DHPS 600), 110cm (DHPS700), 130cm(DHPSS800)


Telescopi ext. cm.

Transport size cm.


Mover + Rotor mod.

DHPS 600 31060 620 90 195 1150 90-100 2800 TP 120+A

DHPS 700 31070 720 110 195 1240 110-120 2800 TP 120+A

DHPS 800 31080 820 130 195 1390 120-130 2800 TP 120+A

THE PRODUCTS

NOTE:Normally on the TNA flail mower is fitted the A rotor, but it is available also this rotor: rotor type B, to cut grass and bushes up to 4/5cm. rotor type C, to cut bushes and branches up to cm 7.OPTIONALS:-Low pressure controls and ergonomic Joystick - Rise for TPC 125 mower (with belts transmission) -Rise for frontal mower hood opening with hydr.cylinder, who function with the quick couplings from the tractor -Rise for cast iron gear box




B LINE - ARMS


DHP/AV -SHRUB ARM- With mower head moving system in the middle of tractor- AMP SYSTEMSemi-professional shrub arm, for farmer works and road-side banks, for grass, bushes and branches, with 120cm. flail mo-wer, mod. TP 120 (professional) and rotor with knife A, to cut up to 6/7cm, with second arm with hydraulic system to move the mower in the middle of the tractor, for a better viewing during the works, AMP SYSTEMTractor power required: from 90 to 120 HP

STANDARD EQUIPMENT:Three point linkage, cat. II., PTO 540 rpm, Drive shaft gr.4, Locking tie rods,140mm adjustable rear roller. Flail mower mod. TP 120, with rotor type A.

Pivoting arm frame with hydraulic cylinder , Hydraulic breakaway with hydr.valve.Reversible rotor rotation, with knives type A (articulated Y knives). Rotor power 58hp.Cables control with 5 levers, oil coo-ler, rear tails light, Cast iron double-gear pump and motor, gear box with 65hp.Floating system on the first arm and on the mower.


Transport size cm.


Mover + Rotor mod.

DHP/AV 600 33060 610 195 1140 90-110 2800 TP 120+A

DHP/AV 700 33070 710 195 1290 110-120 2800 TP 120+A

THE PRODUCTS




NOTE:Normally on the TNA flail mower is fitted the A rotor, but it is available also this rotor: rotor type B, to cut grass and bushes up to 4/5cm. rotor type C, to cut bushes and branches up to cm 7.OPTIONALS:-Low pressure controls and ergonomic Joystick - Rise for TPC 125 mower (with belts transmission) -Rise for frontal mower hood opening with hydr.cylinder, who function with the quick couplings from the tractor -Rise for cast iron gear box

B LINE - ARMS


DHIS - SHRUB ARM - HEAVY DUTY PROFESSIONAL SERIES -

Heavy-duty professional shrub arm, for road-side banks clearing ditches and water-course banks. Mower head TPCT 130model, mt.1.25, with rotor type F, for grass, bushes, branches up to 7/8 cms., telescopic device on the second arm. made in exagonal section. This machine is built with very high quality steel (WELDOX 700).Tractor power required: from 110 to 160 HP

STANDARD EQUIPMENT:Three point linkage, cat. II., PTO 1000 rpm, Drive shaft gr.6, Locking tie rods,170mm adjustable rear roller. Flail mower mod. TPCT 130, with rotor type F. Pivoting arm frame with hydraulic cylinder , Hydraulic breakaway with hydr.valve.

Cables control with 5 levers, oil cooler, rear tails light, Piston pumps and piston motor, double 100hp gear box , Cutting power 75hp. Mower head with hydraulic frontal hood opening with cylinder, and with trasmission belts. Hydraulic hoses in highest pressure type, 4SH, of 1” for mower, and 3/8” for cylinders control.


Transport size cm.

Weight kg.

Tractor HP Rotor rpm/1”

Mover + Rotor mod.

DHIS 800 32080 820 225 1490 100-120 2800 TCPT130+F

DHIS 900 32090 920 225 1580 120-130 2800 TCPT130+F

DHIS 1000 320100 1050 225 1770 150-160 2800 TCPT130+F

DHIS 1000 PLUS 320110 1050 230 1930 150-160 2800 TCPT130+F

THE PRODUCTS

NOTE:Normally, TPCT mower has assembled with rotor F, but availables, there are also the following rotors:-Rotor D, for mixed vegetation, grass and branches, special for water-course banks, to cut very the vegetation very thinner.-Rotor G, hammers, for big vegetation up to 8 cm.OPTIONALS:-Low pressure controls and ergonomic Joystick -High quality electric-low pressure and proportional valve, with ergonomic Joystick -Hydraulic cylinder fitted on the left side anterior axle tractor

B LINE - ARMS


DHIS 1000 PLUS - SHRUB ARM - HEAVY DUTY PROFESSIONAL SERIES -

The model DHIS 1000 PLUS is a specific type built for uses on banks of channels and differentiates from the standard ver-sion for the followings particular: The zipper of rotation has the attack of the first arm in reduced position. The first arm is bent, type that of the excavators, says “monolithic”, this particularity increases the depth of cut in scarp, in fact in comparison to an arm standard DHIS of the same length, this version PLUS reaches a greater distance of 2 Meters.

The second telescopic arm, with two telescopic parts, is built with an OCTAGONAL section, and not hexagonal, for a best linearity of the telescopic arm and a greater resistance to the non linear strengths. The pomp of the services is an axial pump and the distributor is to compensated sections, electronic-proportional, with joystick.

THE PRODUCTS

Multi purpose knifes for grass and bushes

max size 3 cm.Cod.ZP 293016

Rotor A - standard -

Multi purpose “Y” knifes for grass, bushes and shrubs


Rotor D - optional -

heavy hammer for grasses,bushes max size 8 cm.Cod.ZP00002 Rotor G

without extra costs

Knifes for grasses, bushes, reeds max size 6 cm

Cod.ZP293020 Rotor F without extra costs

B LINE - ARMS


C LINE - FORESTRY MULCHERSSERIES

TLPF

TLPF-UX

TPF

TPF-UX


TLPF - FORESTRY MULCHERS - pto 1000 rpm/1”-

Forestry mulcher medium-heavy series, drum rotor with mobile hammers, to cut branches, bushes and small trees up todiameter of 25 cms.Tractor power required: from 70 to 140 HP

STANDARD EQUIPMENT:Three point linkage, cat. II., PTO 1000 rpm, Rear hydraulic hood. Stronger frame built with very high quality steel (DOMEX 700-SS355), double chassis and double counter-blades.100hp gear box, Drum rotor HD type, with mobile hammers,Drive shaft gr.6, with power limitator and free wheel,TLPF-UX 160-180-200 have one single transmission belt.TLPF-UX 220/2 has a double transmission belts.

Model CodeCutting

wide cm.Exterior width

cm.Weight

kg. HP Tractor Belt nrs.Rotor Mod.

PTO rpm/1”

TLPF 160 16016 160 180 1060 70-80 4 24 1000

TLPF 180 16018 180 200 1120 80-100 4 28 1000

TLPF 200 16020 200 220 1210 100-120 4 32 1000

TLPF 220 16022 220 240 1290 120-140 4 36 1000

THE PRODUCTS C LINE - FORESTRY MULCHERS

OPTIONALS:Pushing frame TLPF 160 - 180 - 200 and 220 Hydraulic third link Reinforced Hammer

Tools:

Forged hammer mono sharpForged hammer mono-sharp with amount carried over of welding to

the tungsten carbide

Cod. ZP10280 - HD Rotorstandard

Cod.ZP10280MD - HD Rotoroptional


TLPF-UX FORESTRY MULCHERS - pto 1000 rpm/1”-

Forestry mulcher medium-heavy series, drum rotor with fixed Tools, to cut branches, bushes and small trees up to diameter of 25cms.Tractor power required: from 80 to 140 HP

STANDARD EQUIPMENT:Three point linkage, cat. II., PTO 1000 rpm, Rear hydraulic hood. Stronger frame built with very high quality steel (DOMEX 700-SS355), double chassis and double counter-blades.100hp gear box, Drum rotor HD type, with FIXED Tools,Drive shaft gr.6, with power limitator and free wheel,TLPF-UX 160-180-200 have one single transmission belt.TLPF-UX 220/2 has a double transmission belts.

THE PRODUCTS


Exterior width cm.

Weight kg. HP Tractor Belt nrs. Rotor

Mod. PTO

rpm/1”

TLPF-UX 160 17016 160 180 1180 80-90 4 33 1000

TLPF-UX 180 17018 180 200 1320 100-120 4 39 1000

TLPF-UX 200 17020 200 220 1490 120-130 4 45 1000

TLPF-UX 220 17022 220 240 1630 120-140 4 51 1000

OPTIONALS:Pushing frame TLPF-UX 160 - 180 - 200 - 220 Hydraulic third link Reinforced Hammer

Tools:

Fixed Tools with strong teeths (carbide insert)

Cod. UX 285 - X200 Rotorstandard

C LINE - FORESTRY MULCHERS


TPF FORESTRY MULCHERS - pto 1000 rpm/1”-

Forestry mulcher Heavy Duty series, drum rotor with mobile hammers, to cut branches, bushes and small trees up to diame-ter of 25cms.Tractor power required: from 100 to 180 HP

STANDARD EQUIPMENT:Three point linkage, cat. II., PTO 1000 rpm,Rear hydraulic hood. Stronger frame built with very high quality steel (DOMEX 700-SS355), double chassis ( with the under frame cover made in HARDOX 400) , and triple counter-blades.140hp gear box, Drive shaft gr.6, with power limitator and free wheel, Double transmissions belts XPB QUAD-POWER.


Exterior width cm.

Weight kg. HP Tractor Belts nr. Hammer

nr.PTO

g/min.

TPF 160 19016 160 200 1430 100-110 8 24 1000

TPF 180 19018 180 220 1550 100-120 8 28 1000

TPF 200 19020 200 240 1670 120-150 8 32 1000

TPF 220 19022 220 260 1780 140-180 8 36 1000

THE PRODUCTS

OPTIONALS:Pushing frame TPF 160 - 180 - 200 - 220 Hydraulic third link Heavy shaft 1”-3/4 Z6 GR.8 type V with limiter

Utensili da taglio

Forged hammer mono sharpForged hammer mono-sharp with amount carried over of welding to

the tungsten carbide

Cod. ZP10280 - HD Rotorstandard

Cod.ZP10280MD - HD Rotoroptional



TPF-UX FORESTRY MULCHERS - pto 1000 rpm/1”-

Forestry mulcher Heavy Duty series, drum rotor with fixed Tools, to cut branches, bushes and small trees up to diameter of 40 cms.Tractor power required: from 100 to 250 HP

STANDARD EQUIPMENT:Three point linkage, cat. II., PTO 1000 rpm,Rear hydraulic hood. Stronger frame built with very high quality steel (DOMEX 700-SS355), double chassis ( with the under frame cover made in HARDOX 400) , and triple counter-blades.140hp gear box, Drive shaft gr.6, with power limitator and free wheel, Double transmissions belts XPB QUAD-POWER.


Exterior width cm.

Weight kg. HP Tractor Belts nr. Hammer

nr.PTO

g/min.

TPF-UX 160 18016 160 200 1490 100-120 8 33 1000

TPF-UX 180 18018 180 220 1650 120-140 8 39 1000

TPF-UX 200 18020 200 240 1720 130-160 8 45 1000

TPF-UX 220 18022 220 260 1980 160-250 8 51 1000

THE PRODUCTS

OPTIONALS:Pushing frame TPF 160 - 180 - 200 - 220 Hydraulic third link Heavy shaft 1”-3/4 Z6 GR.8 type V with limiter

Tools:

Fixed Tools with strong teeths (carbide insert)

Cod. UX 456- X273 Rotorstandard



D LINE - FORESTRY HYDRAULIC MOWERSFOR EXCAVATORS

SERIES

TE-DXL

TE-DL

TE-DP

TE-CL

TE-CP


TE-DXL - MINI FLAIL MOVER FOR GRASS

MINI-Flail mower for grass, suitables to mini-excavators with weight up to 1.6 t., with power up to 20hp.-Max. working diameter 1,5cm.

STANDARD EQUIPMENT:Top bracket with pins. Hydraulic cast iron gear motor.reversible 8cc, fitted with directly to the rotor.100mm, rear adjustable roller. Rotor with knife mod. H

Model Code Cutting width cm.

Exterior width cm.

Weight kg.

Excavator weight ton.

Flow ratelt/min

Pressure setbar Knifes nr.

TE 60DXL 60060 60 80 65 0.8 - 1.5 20 160 20

TE 80DXL 60080 80 100 85 1.2 - 1.6 20 160 24

THE PRODUCTS D LINE - EXCAVATOR FLAIL MOWERS

NOTE:The hydraulic motor hasn’t the third hose, for drain lineThis mower can’t accept other kind of rotorsOPTIONALS:Floating link Adjustable flow rate valve 1/2”

Tools:

Knifes for grass and bushes max size 1 cm.

Cod. ZP336002H Rotor - standard -


Multipurpose knifes for grass and branches.max size 2 cm.Cod.ZP ZP322008 Rotor O - standard -

Model RotorKnifes

RotorKnifes

TE 80 DL O - 24 I - 12

Multi purpose “spatula” knifes for grass, bu-shes and wood.max size 3 cm.Cod. ZP173001Rotor I - optional -

TE 100 DL O - 40 I - 20

TE/DL - MINI FLAIL MOVER FOR GRASS - MINI EXCAVATORS

Flail mower for grass, and small branches, suitables to mini-excavators with weight up to 3.0 t., with power up to 35hp.-Max. working diameter cm. 2,5/3.

STANDARD EQUIPMENT:Steel plat, not painted, to buil the top bracket for excavator. 100mm, rear adjustable roller. Rotor with knife mod. O.Hoses with 1500m of lenght. Hydraulic cast iron motor of 11cc, reversibile, fitted directly with the rotor


Exterior width cm.

Weight kg.


Flow ratelt/min


TE 80DL 610080 80 100 100 2.0 - 2.5 25 170 24

TE 100DL 610100 100 115 120 2.5 - 3.0 25 170 32

THE PRODUCTS

NOTE:The hydr. Motor hasn’t the third hose for drain line, usually it is used a 11cc size motor, but there are availables also 14cc, and 16cc sizes, without any rise on the price.Over than the rotor mod. O, it is available for DL the rotor IOPTIONALS:Top bracket with pins D.30/35 - 35/40 - 45/50 Floating link DL-DPAdjustable flow rate valve 1/2”

D LINE - EXCAVATOR FLAIL MOWERS


TE/DP - FLAIL MOWERS FOR GRASS AND BRANCHES, FOR MINI-EXCAVATORS

Flail mower for grass, and small branches, suitables to mini-excavators with weight up to 6.0 t., with power up to 50hp.- Max. working diameter cm.6

STANDARD EQUIPMENT:Steel plat, not painted, to buil the top bracket for excavator. Hydraulic cast iron motors, reversibile, fitted directly with the rotor. (for motors size see the notes below) 140mm,rear adjustable roller. Rotor with knife type A.Hoses with 2,00 mts lenght.


Exterior width cm.

Weight kg.


Flow ratelt/min


TE 80/DP 620080 80 110 170 3.0 - 4.0 30-35 180 24

TE 100/DP 620100 100 130 195 4.0 - 5.0 40-45 180 32

TE 120/DP 620120 120 150 230 5.0 - 6.0 45-50 180 40

THE PRODUCTS

NOTE:

The standard hydr. Motor used are: 14 cc. TE 80DP 16 cc. TE100 DP

22 cc. TE 120DP

Standard rotor is A type, we can install -B- -C- or -I- type also.OPTIONALSgr.3 motor on TE80-100DP Adjustable flow rate valve 3/4” Adjustable flow rate valve 1/2”-Top bracket with pin 30/40 Floating link DP Parking mower leg-Top bracket with pin 45/50

Tools:

Multipurpose knifes for grass and bushes.



“Y” Knifes for grass, bushes and branches .

Diam.max 4 cm.Cod.ZP 293003

Rotor B - optional -

“Spatula” knifes for grass and bushes


Rotor I - optional -

“Spatula” Knifes for grass and bushes


Rotor C - optional -



TE/CL - FLAIL MOWERS FOR GRASS AND BRANCHES, FOR MIDI-EXCAVATORS

Flail mower for grass, branches and bushes , suitables to Midi-excavators with weights from 6,0t. to 8,0t., and with powerup to 70 hp. Max working diameter cm. 6/7.

STANDARD EQUIPMENT:Steel plat, not painted, to buil the top bracket for excavator. Hydraulic cast iron motors, reversible, without the third hose for drain line and fitted with a trasmission belts to the rotor. Standard rotor is type B; 140 mm. rear adjustable roller.Hoses with 2,0 mts lenght. Belts transmission type SPBX.


Exterior width cm.

Weight kg.


Flow ratelt/min


TE 100/CL 630100 105 125 315 6.0 - 7.0 50-60 190 24

TE 120/CL 630120 125 140 345 7.0 - 8.0 50-60 190 32

THE PRODUCTS

NOTE:

The standard hydr. Motor used are: 34cc with the internal drain line Standard rotor type BOPTIONALSType A Rotor Type C Rotor Type I RotorFloating link DP Adjustable flow rate valve 3/4” 34 cc. Piston motorTop bracket with pins Parking mower leg

Tools:



Rotor A - standard






Rotor I - optional -






TE/CP - FLAIL MOWERS FOR GRASS, BUSHES AND BRANCHES FOR MIDI-EXCAVATORS

Flail mower (semi-forestry range) for grass, branches, bushes and small trees, suitables to Midi-excavators with weightsfrom 8,0 to 13,0 t. and with power up to 100hp.-Max. working diameter 8cm.

STANDARD EQUIPMENT:Steel plat, not painted, to buil the top bracket for excavator. Hydraulic cast iron motors, reversible, without the third hose for drain line. and fitted with a trasmission belts to the rotor. Rotor type F. Strong double frame made with high quality steel (SS355-DOMEX 700). 170mm. Rear adjustable roller. Hoses with 2,0mts lenght . Trasmission belts with SPBX type.


Exterior width cm.

Weight kg.


Flow ratelt/min


TE 120/CP 640125 125 145 430 8.0 - 10.0 85 - 100 200-220 40

TE 160/CP 640160 160 185 525 10.0 - 13.0 85 - 100 200-220 48

THE PRODUCTS

NOTE:

The standard hydr. Motor used is: 43 cc. with the internal drain lineStandard rotor is B type, we can install -C- -F- or -G- type also.OPTIONALSTop bracket with pins 47 cc.piston motor Parking mower legFloating link DP Adjustable flow rate valve 3/4”

Tools:





Cod.ZP 293020 Rotor F - optional -

Heavy hammers for runners, bushes, reeds,

bushes Diam.max 8 cm.Cod.ZP 00002

Rotor G - optional -

“Y” Knifes for grass, bushes and bran-

ches .Diam.max 4 cm.Cod.ZP 293003

Rotor B - standard -



E LINE - FORESTRY MOVERSFOR EXCAVATORS

SERIES

TFXL

TFL

TFL-UX

TFM

TFM-UX

TFS

TFS-UX

TP-R

TFL-R E TFM-R


Tools:

Forged hammer withdouble cutting

Cod. ZP190464HDL Rotor

TFXL - FORESTRY MOVERS FOR MIDI - EXCAVATORS

Forestry mover for shrubs, dense vegetation and small plants, apply on midi-excavators with weights from 5.0 up to 7.5 ton and powers up to 70 HP. Installable on professional brush cutter arms with a hydraulic piston pump. Max cutting 10 cm..

STANDARD EQUIPMENT:Steel plat, not painted, to buil the top bracket for excavator, rotor with hammers, SPBX transmission V-belts SPBX, heavy renforced chassis with special steel, 34 cc.hydraulic piston engine, hydraulic hoses mt.2.00 long, hydraulic front door ope-ning.


Exterior width cm.

Weight kg.


Flow ratelt/min


TFXL 100 645100 100 120 415 5.0 - 7. 5 60 - 70 220 - 250 20

THE PRODUCTS E LINE - FORESTRY MOVERS

NOTE:

For the operation of the hydraulic cylinder, two 3 / 8 “ hydr.lines is requiredOPTIONALS:Top bracket with pins 47 cc.piston motor.


TFL - FORESTRY MOVERS FOR MIDI - EXCAVATORS

Flail mower, MINI-FOREST series, for branches and small trees, suitable to midi-excavators with weights from 7,0 ton up to10,0 ton. and with power up to 100hp..-Max. working diameter 15 cm.

STANDARD EQUIPMENT:Steel plat, not painted, to buil the top bracket for excavator, rotor with hammers, transmission V-belts SPBX, heavy renfor-ced chassis with special steel, 34 cc.hydraulic piston engine, hydraulic hoses mt.2.00 long, hydraulic front door opening.


Exterior width cm.

Weight kg.


Flow ratelt/min


TFL 100 650100 105 125 650 7.0 - 10.0 90-100 220-250 16

NOTE:

For the operation of the hydraulic cylinder, two 3 / 8 “ hydr.lines is required

OPTIONALSTop bracket with pins 56 cc.piston motorHammer with double cutting Hammer mono cutting with sharp tungsten

Tools:

Hammer mono cutting Cod.ZP 10280

Rotor HD - standard -

Hammer double cuttingCod.ZP 10280 REV

- optional -

Hammer mono cutting with tungsten sharpCod.ZP 10280MD

optional



TFL/UX - FORESTRY MOVERS FOR MIDI - EXCAVATORS

Flail mower, forestry series, for branches and small trees, suitable to midi-excavators with weights from 7,0 ton up to12,0 ton. and with power up to 100hp.Fixed Tools with tungsten.-Max. working diameter 20 cm.

STANDARD EQUIPMENT:Steel plat, not painted, to buil the top bracket for excavator, rotor HAMMERS WITH CARBIDE TUNGSTEN WELDING ( very good with the mower has to work on grounds where there is big contamination of stones), transmission V-belts SPBX, heavy renforced chassis with special steel, 34 cc.hydraulic piston engine, hydraulic hoses mt.2.00 long, hydraulic front door opening..


Exterior width cm.

Weight kg.


Flow ratelt/min


TFL-UX 100 655100 105 125 690 7.0 - 12.0 90-100 250-270 21

NOTE:


OPTIONALS:Top bracket with pins 56 cc.piston motor.

Tools:

Fixed teeths with carbi-de tungsten welding

Cod.UX 285X200 Rotor - standard -



TFM - FORESTRY MOVERS FOR MIDI - EXCAVATORS

Flail mower, forestry series, for branches and trees, suitable to midi-excavators with weights from 10,0 ton up to 15,0 ton. and with power up to 120hp. - Max. working diameter cm.25.

STANDARD EQUIPMENT:Steel plat, not painted, to buil the top bracket for excavator. Piston motor of 56cc.Rotor type HD, with mobile strong ham-mers. Hoses with 2,0 mts. Lenght. Trasmission belts with XPB type.Frontal hood with hydraulic opening system. Strong double frame made with high quality steel (SS355-DOMEX 700),and with a cover inside-steel frame made in HARDOX 400.


Exterior width cm.

Weight kg.


Flow ratelt/min


TFM 100 660100 105 125 860 10.0 - 12.0 115-120 230-250 16

TFM 130 660130 130 150 940 12.0 - 15.0 115-120 230-250 20

NOTE:


The TFM series has the ability to install a pair of skids that put the blades at 8-9 cm.higher than the ground level. Are recom-mended for work where there is a strong presence of stones and boulders e.g. in the mountainsOPTIONALS:

Top bracket with pins 64 cc.piston motor.

Hammer with double cutting Hammer mono cutting with sharp tungsten

Tools:



Hammer double cuttingCod.ZP 10280 REV

- optional -

Hammer mono cutting with tungsten sharpCod.ZP 10280MD

optional



TFM-UX - FORESTRY MOVERS FOR MIDI - EXCAVATORS

Flail mower, forestry series, for branches and trees, suitable to midi-excavators with weights from 10,0 ton up to 18,0 ton. and with power up to 150hp. - Max. working diameter cm.25-30.

STANDARD EQUIPMENT:Steel plat, not painted, to buil the top bracket for excavator.Piston motor of 56cc.Fixed teeth rotor, with carbide inserts tooth (UX). Hoses with 2,5 mts lenght. Trasmission with belts XPB. Hydraulic front hood, Strong double frame made with high quality steel (SS355-DOMEX 700), with a cover inside-steel frame made in HARDOX 400, and counter blades.


Exterior width cm.

Weight kg.


Flow ratelt/min


TFM-UX 100 680100 105 125 890 10.0 - 12.0 115-120 230-250 21

TFM-UX 130 680130 130 150 990 12.0 - 15.0 115-120 230-250 27

NOTE:


The TFM series has the ability to install a pair of skids that put the blades at 8-9 cm.higher than the ground level. Are recom-mended for work where there is a strong presence of stones and boulders e.g. in the mountainsOPTIONALS:

Top bracket with pins 64 cc. piston motor

Tools:

Fixed teeths with carbi-de tungsten welding

Cod.UX 285X200 Rotor - standard -

X200 Rotor- standard -



Tools:



Hammer double cutting

Cod.ZP 10280 REV- optional -

Hammer mono

cutting with tungsten sharp

Cod.ZP 10280MD optional

TFS - FORESTRY MOVERS FOR EXCAVATORS

Flail mower, MAXI-FOREST series, for branches and trees, suitable to large-excavators with weights from 18,0 ton up to 25,0 ton. and with power up to 180hp.Max. working diameter 35 cm.

STANDARD EQUIPMENT:Steel plat, not painted, to buil the top bracket for excavator. Piston motor of 56cc. Drum rotor type HD, with mobile hammer.Hoses with 3,0 mts. lenght. Trasmission belt type XPB. Hydraulic front hood, Strong double frame made with high quality steel (SS355-DOMEX 700), with a cover inside-steel frame made in HARDOX 400, and double counter blades.


Exterior width cm.

Weight kg.


Flow ratelt/min


TFS 130 670130 130 150 1290 18.0 - 25.0 130-140 250/270 20

TFS 160 670160 160 180 1450 21.0 - 25.0 130-140 250/270 24

NOTE:

For the operation of the hydraulic cylinder, two 3 / 8 “ hydr.lines is requiredThe TFS series has the ability to install a pair of skids that put the blades at 8-9 cm.higher than the ground level. Are recom-mended for work where there is a strong presence of stones and boulders e.g. in the mountainsOPTIONALSTop bracket with pins Hammer with double cutting 64 cc.Piston motorHammer mono cutting with sharp tungsten



Tools:

Fixed teeths with carbide tungsten

weldingCod.UX456

X273 Rotor - standard -

TFS/UX - FORESTRY MOVERS FOR EXCAVATORS

Flail mower, MAXI-FOREST series, for branches and trees, suitable to large-excavators with weights from 16,0t. up to 25,0 ton. and with power up to 180 hp.Max. working diameter 45 cm.

STANDARD EQUIPMENT:Steel plat, not painted, to buil the top bracket for excavator Piston motor of 84cc. Fixed teeth rotor, with carbide inserts tooth (UX), hoses with 2,5 mts lenght Trasmission with belts XPB. Hydraulic front hood, heavy-double frame made with high quali-ty steel (SS355-DOMEX 700), with a cover inside-steel frame made in HARDOX 400, and double counter blades.


Exterior width cm.

Weight kg.


Flow ratelt/min


TFS-UX 130 690130 130 150 1370 18.0 - 25.0 170-180 270/300 27

TFS-UX 160 690160 160 180 1540 21.0 - 25.0 170-180 270/300 33

NOTE:

For the operation of the hydraulic cylinder, two 3 / 8 “ hydr.lines is requiredThe TFM series has the ability to install a pair of skids that put the blades at 8-9 cm.higher than the ground level. Are recom-mended for work where there is a strong presence of stones and boulders e.g. in the mountainsOPTIONALSTop bracket with pins



TP/R - MEDIUM FORESTRY MOVER FOR “SPIDER” EXCAVATOR

Flail mower (semi-forestry range) for grass, branches, bushes and small trees, suitables to SPIDER-excavators with weightsfrom 6,5 Ton up to 11,0 Ton, with power up to 120hp.Max. working diameter of 8-10 cm.

STANDARD EQUIPMENT:Steel plat, not painted, to buil the top bracket for excavator. Piston motor of 47cc. Fitted directly with the rotor.Rotor with knife type D, very stong made in HARDOX construction plates. Hoses with 2,50 mts. lenght.Strong double frame made with high quality steel (SS355-DOMEX 700). and with special construction to support the exca-vator weight, when this one need to move it-self, using the mower as a solid point.


Exterior width cm.

Weight kg.


Flow ratelt/min


TPR 120 69512 120 145 550 6.5 - 11.0 100-110 200-220 48

OPTIONALS:Top bracket with pins

Tools:

“Y” Knifes for grass, bushes and branches


Rotore D - standard -



Tools:





Hammer mono



TFL/R E TFM/R - FORESTRY MOVER FOR “SPIDER” EXCAVATOR

Flail mower, MIDI-FOREST series, for branches and trees, suitables to SPIDER excavators with weights from 8,0 Ton. up to15,0 Ton. with power up to 150 hp.max working diameter cm.20-25

STANDARD EQUIPMENT:Steel plat, not painted, to buil the top bracket for excavator. Piston motor of 56cc. Rotor type HD, with mobile strong ham-mers. Hoses with 2,0 mts. Lenght. Trasmission belts with XPB type.Frontal hood with hydraulic opening system. Strong double frame made with high quality steel (SS355-DOMEX 700),with a cover inside-steel frame made in HARDOX 400 and with special construction to support the excavator weight, when it needs to move it-self, using the mower as strong point.


Exterior width cm.

Weight kg.


Flow ratelt/min


TFL/R 100 695100 100 125 710 8.0 - 10.0 90-100 230-250 16

TFM/R 130 695130 130 150 940 9.0 - 15.0 90-100 230-250 20

NOTE:For the operation of the hydraulic cylinder, two 3 / 8 “ hydr.lines is requiredOPTIONALS:Top bracket with pins Hammer mono cutting with sharp tungstenHammer with double cutting



F LINE - ATTACHMENTSFOR SHRUB ARMS AND

FOR MINI/MIDI-EXCAVATORSSERIES

TNA

TP-TPC

TPCT

RF

FF

HKL

TS

TR

BF/SCH

BD


TNA - FLAIL MOWER FOR GRASS , BRANCHES FOR SHRUB CUTTER ARMS

Flail mower to cut grass and branches, LIGHT SERIES, suitables to every model of shrub cutter arms, for farmer worksMax. working diameter 5/6 cm.

STANDARD EQUIPMENT:Steel plat, not painted, to buil the top bracket. Cast iron gear motor gr.3, reversible. Rotor with knife type A.140mm rear adjustable roller.Guards with chains front and rear with rubber.


Exterior width cm.

Weight kg.

Flow ratelt/min


TNA 80 510080 80 100 150 50-70 180 24

TNA 100 510100 100 125 175 60-90 180 32

TNA 120 510120 120 145 210 60-90 180 40

THE PRODUCTS F LINE - ATTACHMENTS

NOTE:The mover are supplied with only the flat iron plat, top bracket on request.Hoses aren’t included in the mower price, The hydr.motor, reversible, hasn’t the third hose for drain lineO Rotor fit on TNA 80 and 100 as standard rotor allow to cut grass and branches until 2 cm.

Tools:

Multipurpose knifes for grass and bu-

shes.max size 3 cm.Cod.ZP 293016












TP/TPC - FLAIL MOWER FOR GRASS, BRANCHES FOR SHRUB CUTTER ARMS

Flail mower for grass, branches and bushes, medium-heavy series, for PROFESSIONAL WORKS, suitable to every kind ofshrub cutter arm.Max. working diameter 7/8 cm

STANDARD EQUIPMENT:Steel plat, not painted, to buil the top bracket. Cast iron gear motor gr.3, reversible. Rotor with type A.140 mm rear adjustable roller. TP mower model, has the motor fitted directly with rotor.TPC mower model has the motor fitted in-directly with rotor (Trasmission belts).TPC models are the new 47 cc. piston motor


Exterior width cm.

Weight kg.

Flow ratelt/min


TP 120 520120 120 140 245 90-95 180-200 40

TPC 100 530100 105 130 275 90-100 190-210 32

TPC 125 530125 125 150 295 90-100 190-210 40

TPC 160 530160 160 180 330 90-100 190-210 48

NOTE:The mover are supplied with only the flat iron plat, top bracket on request.Hoses aren’t included in the mower price, The hydr.motor, reversible, hasn’t the third hose for drain line

Tools:















TPCT - FLAIL MOWER FOR GRASS, BRANCHES FOR SHRUB CUTTER ARMS

Flail mower for branches, bushes and reed, Heavy Series, made for hard works, suitables to shrub cutter arms, with high performance hydraulic system only for professional uses.Max. working diameter 7/8cm.

STANDARD EQUIPMENT:Steel plat, not painted, to buil the top bracket. Piston motor of 47cc. Rotor with knife type F, built with very strong tube (150x10) in SS335 quality steel. Trasmission belts. Hydraulic frontal opening hood.


Exterior width cm.

Weight kg.

Flow ratelt/min


TPCT 130 540130 125 150 370 100 - 110 230-250 40

TPCT 160 540160 160 185 415 100 - 110 230-250 48

NOTE:

The mover are supplied with only the flat iron plat, top bracket on request.Hoses aren’t included in the mower priceThe piston motor, reversible, need a 1/2” dreinage pipeOPTIONALS56 cc.Piston motor

Tools:

Heavy hammers for runners, bushes, reeds, bushes


Rotor G - standard -

Knifes for grasses, bushes, reeds

max size 6 cmCod.ZP 293020

Rotor F - optional -



RF - ROTOVATOR ACQUATIC CUTTER FOR SHRUB ARM AND MINI-EXCAVATORS

-Acquatic special rotovator cutter, for clearing the bottom of watercourse, with flow water, where it need tocut grass, weed, and mill the depth. Very important is the cleaning from the sediment and mud, until 6 cm.every session.

STANDARD EQUIPMENT:Steel plat, not painted, to buil the top bracket. Cast iron gear motor gr.3, reversible.Floating link made with three big spring who help the machine to follow very weel the depth. and the arm pressure can’t overcharging the FF frame. Cutters with fixed knives 45° gear trasmission between the motor and the axel with a very high performance .Special seals fitted inside the cutters system, to save the bearings and gears from the water.

Model Code Working width cm. Weight kg. Flow rate

lt/minPressure set

bar

RF 60 72060 70 185 70 - 80 200-220

RF 80 72080 90 215 70 - 80 200-220

NOTE:The rotovator is supplied with only the flat iron plat, top bracket on requestHoses aren’t included in the mower priceThe Orbital motor, reversible, need a 1/2” dreinage pipeSuggestion: utilize this equipment on shrub arm with cooling system for best performance56 cc.Piston motor



FF - ROTOVATOR ACQUATIC CUTTER FOR SHRUB ARM AND MINI-EXCAVATORS

Acquatic special rotovator cutter, for clearing the bottom of watercourse, with flow water, where it need tocut grass, weed, and mill the depth. Very important is the cleaning from the sediment and mud.

STANDARD EQUIPMENT:Steel plat, not painted, to buil the top bracket. Cast iron gear motor gr.3, reversible. Floating link made with three big spring who help the machine to follow very weel the depth. and the arm pressure can’t overcharging the FF frame.Cutters with fixed knives 45° Gear trasmission between the motor and the axel with a very high performance .Special seals fitted inside the cutters system, to save the bearings and gears from the water.


lt/minPressure set

bar

FF 125 710125 Variabile da 75 a 125 195 60 - 70 180 - 190

NOTE:The rotovator is supplied with only the flat iron plat, top bracket on requestHoses aren’t included in the mower priceSuggestion: utilize this equipment on shrub arm with cooling system for best performanceWorking always in opposite direction against current of the watercourse



HKL - WEED CUTTING BUCKET FOR MIDI-EXCAVATORS

-Weed cuttin bucket, for clearing the watercourse, from the weed and aquatic grass . During the grasscuttingit is possible to charge the cutted vegetation into the bucket, and after the cutting it is possible to discharge the grass or weed on the bank.

STANDARD EQUIPMENT:Steel plat, not painted, to buil the top bracket of the excavator.Hydraulic roller motor of 100cc.Floting system with a special plat in hardened spring steel,HERDER cutting bar system, with strong double finger and strong sections,


lt/minPressure set

bar

HKL 250 750255 250 280 40 150 - 160

HKL 300 750305 300 330 40 150 - 160

HKL 400 750405 400 390 40 150 - 160

NOTE:To be careful to have a pressure not over 160 bar, as indicated in the table, to avoid blade damage.



TS - TREE SHEARS FOR EXCAVATORS

Tree shear, TS series, are equipped with an independently operated hydraulic grapple to hold the tree firmly during the whole cutting cycle. TS has a shear opening of 250 to 450 mm. They are suitable to excavators from 4,0 ton To 20,0 ton.

STANDARD EQUIPMENT:Grab to hold the tree.Frame with special construction to save the cabine against the hurts form the branches cutted.Hardened shears.

Model Code Working width cm. Excavator Ton. Weight kg. Flow rate

lt/minPressure set

bar

TS 250 76025 25 4.0 - 6.0 350 18-20 220-230

TS 350 76035 35 7.0 - 9.0 470 27-30 220-230

TS 400 76040 40 10.0 - 15.0 690 45-50 240-270

TS 450 76045 45 16.0 - 20.0 910 50-60 270-300

OPTIONALS:Turning system for 90°, with hydraulic cylinder - turning table, with roller hydraulic motor for turn up to 300°Top bracket with pinsNOTE:To cut high trees, it is better to cut the same tree in two three pieces. Remind: tree weight can be too high for some mini-excavators.The working diam., Indicated in the table, has been calculated with soft woods.For hard woods, the working diameter can be less of 15-20%.Hoses aren’t included in the price.



TR - CUTTER EDGE BAR

The cutter edge bar TR series are used for cutting branches and trees up to 9 cm. Are used on both wings on both brush cutter excavator with weights from 4.0 ton to 10.0 ton.

STANDARD EQUIPMENT:Hardox steel strong cutter bar, safety valve, priority valve for right flow rate.

Model Code Working width cm. Excavator Ton. Weight kg. Flow rate

lt/minPressure set

bar

TR 150 740150 150 4.0 - 7.0 165 45-60 220-230

TR 220 740220 220 7.0 - 10.0 230 60-85 220-230

NOTE:Suggest to avoid overpressure on the circuit, to cause the damage on the blade.



BF - CUTTER BAR FOR SHEARING HEDGES AND TALL TREES

Cutter bar with a width of 1.5 meters, for shearing edges, with SCHUMACHER cut system. Max working diametre 1,5 cm.

STANDARD EQUIPMENT:Steel plat, not painted, to buil the top bracket, 150 cc. orbital motor.

Model Code Working width cm. Weight kg. Flow rate lt/min. Pressure set bar

BF/SCH 150 730150 150 70 50-60 150-160



BD - CUTTER WHEELS BAR FOR SHRUB ARMS AND EXCAVATORS

The cutter wheels bar BD series are suited to the cutting of shrubs, small plants up to a maximum diameter of 10 cm., are applicable on excavators from 4.0 to 20.0 Ton, and also available on shrub arms with professional hydraulic circuit with cooling system.

STANDARD EQUIPMENT:60 cm. tempered steel discs. Gr.3 gear box motor.Belt transmission between discs.

Model Code Working width cm.

Excavator Ton. Weight kg. Flow rate lt/

min.Pressure set

bar Disc nr.

BD 110 770110 110 5.0 - 8.0 135 80-100 150-170 2

BD 160 770160 160 6.0 - 8.0 180 80-100 150-170 3

BD 220 770220 220 8.0 - 10.0 210 80-100 150-170 4

BD 270 770270 270 10.0 - 13.0 245 80-100 150-170 5

OPTIONALS:Top bracket with pins for excavatorTop bracket with pins for shrub arm



G LINE - BRUSH MOWER ATTACHMENTSFOR SKID STEER AND LOADERS

SERIES

SS-CL

SS-TFF

SS/TFF-UX


SS/CL - BRUSH MOVER ATTACHMENT FOR SKID STEER AND LOADERS

Mover for herbs and shrubs, with rotor blades, chopping up to cm.7 to skid and loader with powers from 45 to 100 HP.

STANDARD EQUIPMENT:Quick floating linkage. Front hydraulic hood. Stronger frame built with very high quality steel (DOMEX 700-SS355), and counter blades. Cast iron gear motor. Rotor with kinfe type F.Single belt transmission.Hoses with 2,0 mts. Lenght ( without the quick couplings)170mm rear adjustable roller.

Model Code Working widt cm.

Exterior width cm. Weight kg. Power HP flow rate lt/

min.Pressure set bar

Knifesnr.

SS/CL 125 810125 125 150 480 45-60 50-70 180-220 40

SS/CL 160 810160 160 185 730 50-90 70-90 180-220 48

SS/CL 190 810190 215 215 810 60-100 80-110 180-220 64

THE PRODUCTS G LINE - BRUSH MOVER ATTACHMENTS

NOTE:Type B rotor or C for SS/CL 125 (without extra charge)Type G rotor or F for SS/CL 160 e 190 (without extra charge)

Tools:“Spatula” knifes for grass and bushes




Cod.ZP 293020 Rotor F - optional -

Heavy hammers for runners, bushes, reeds,

bushes Diam.max 8 cm.Cod.ZP 00002

Rotor G - optional --



Rotor B - standard -


SS/TFF- FORESTRY MOVER ATTACHMENT FOR SKID STEER AND LOADERS

Mover for herbs and shrubs, with retractable rotor hammers, chopping up to cm.20 for skid with hydraulic high flow with power from 70 to 130 HP.

STANDARD EQUIPMENT:Hydraulic front hood. Stronger frame built with very high quality steel (DOMEX 700-SS355), and double counter blades.Piston motor of 56cc. Rotor type HD with mobile hammer. Single belt transmission.Hoses with 2,0 mts. lenght ( without quick release couplings)




Knifesnr.

SS/TFF 130 820130 130 160 840 80-110 100-130 200-230 20

SS/TFF 160 820160 160 190 980 90-120 100-130 200-230 24

SS/TFF 180 820180 180 205 1150 110-140 110-130 220-250 28

OPTIONALS:Pushing frame64 cc. Piston motorAntishock valve

Tools:





Hammer mono





SS/TFF-UX - TRINCIATRICE FORESTALE PER MINI PALE E SKID STEER LOADER

Forestry mower, for bushes, branches and small trees, to cut up max. diameter of 25 cm, for skid steer, with hydraulic sy-stem at high performance and high oil flow, with power from 80 hp to 140 hp.

STANDARD EQUIPMENT:Hydraulic front hood. Stronger frame built with very high quality steel (DOMEX 700-SS355), and double counter blades.Piston motor of 56cc. Rotor type HD with mobile hammer. Single belt transmission.Hoses with 2,0 mts. lenght ( without quick release couplings)




Knifesnr.

SS/TFF UX 130 830130 130 160 890 80-110 120-130 220-250 27

SS/TFF UX 160 830160 160 190 1030 90-120 120-130 220-250 33

SS/TFF UX 180 830180 180 205 1150 110-140 120-130 250-300 39

OPTIONALS:Pushing frameAntishock valve

Tools:Fixed Tools with

strong teeths (carbide insert)

Cod.UX 285 X200 Rotor- standard -



H LINE - MOWING BOATSSERIES

S1F

MF


S1F - ROTO MILLING CUTTER BOAT

The roto milling cutter boat OSMA, S1F series, are boats turned to the use of maintenance of channels and courses water. The powerboat S1F is suitable for the cleaning of the irrigated channels. This type of job, allows to eradicate all the aquatic grasses that are present on the fund, besides they reduce notably the presence of deposits, sediments and other.

STANDARD EQUIPMENT:Electronic dashboard with errors signals control and maintenance system flashlights.Operator station with ergonomic seat Designed for comfort, simple and easy operation, allows the operator to focus on production. Helix LINE adjustable hydrauli-cally in height and direction, motor and place guide covers against vandal actions. Internal boat chambers for total safety.

Model Code Working deep cm.

Working width cm.

Boat lenght mt. HP Power Weight kgs. floatage level with 1

person

S1F 150 850150 170 150 4.90 45 1600 30 - 35 cm.

S1F 180 850180 200 180 5.70 60 1950 30 - 35 cm.

S1F 220 850220 250 220 6.80 75 2750 30 - 38 cm.

PRODUCTS

OPTIONALS:Front mover fitted on hydraulic orientable boom100 HP Diesel Engine (only S1F 220)Radio controls

FEATURES:

Electronic dashboard with maintenance system flashlight

- standard -

Hydraulic front movers cm.220

- std on S1F 220 -

H LINE - MOWING BOATS


MF - WEED CUTTING BOAT

The weed MOWING BOATS OSMA, series MF, are boats turned to the use of maintenance of channels and courses water. The boat MF is suitable for the cutting and cleaning jobs in the irrigated channels. This type of works, allows to easily cut the whole present vegetation on the shores of the channels without damaging the fund of the same with rapidity and safety,

STANDARD EQUIPMENT:Electronic dashboard with errors signals control and maintenance system flashlights.Operator station with ergonomic seat Designed for comfort, simple and easy operation, allows the operator to focus on production. Helix LINE adjustable hydrauli-cally in height and direction, motor and place guide covers against vandal actions. Internal boat chambers for total safety.

Model Code Working deep cm.

Working width cm.

Boat lenght mt. HP Power Weight kgs. floatage level with 1

person

MF 400 860150 170 150 4.90 45 1600 30 - 35 cm.

MF 450 860180 200 180 5.70 60 1950 30 - 35 cm.

MF 500 860220 250 220 6.80 75 2750 30 - 38 cm.

PRODUCTS H LINE - MOWING BOATS

OPTIONALS:Scafo in acciaio inox antiusura e anticorrosioneMotore 100 HP (solo MF 500)Radiocomando

FEATURES:

Electronic dashboard with maintenance system flashlight

- standard -

Double directional helix system- standard

only on MF500 -


The data in this catalog are provided as an indication, the manufacturer may at any time make modifications to the models described in this catalog, for technical or commercial reasons.The illustrations in this document do not necessarily show the product in standard version.For more information the customer is asked to contact the nearest dealer or the company itself Osma snc.

Published August 2009

Qualità e tradizione dal 1976Qualità e tradizione dal 1976

OSMA SNC DI SANZANNI FRANCESCOVIA U.FOSCOLO 36/36A -

26020 SCANNABUE DI P.PIGNANOCREMONA (ITALY)

TEL.+39 0373 982 466 FAX +39 0373 982 [email protected] - web: www.osmasnc.com

machines for land reclamation and watercourse maintenance

Documents