macnaught lubrication & greasing equipment pdf reiniger/katalog_mcnaught.pdf · 6 greasing...

macnaught lubrication & greasing equipment

macnaught.com.au

Since its foundation in 1948,

Macnaught Pty Ltd has been

designing, engineering,

manufacturing and supplying high

quality lubrication and fluid

management equipment into

agricultural, industrial and

automotive markets around the

world. Macnaught also specialises

in manufacturing unique products

for the mining, aviation and marine

industries.

Macnaught has worked hard over

the years to become a respected

leader in its field and to develop a

name synonymous with high

quality yet affordable equipment.

With its strong customer, R & D

and global focus, Macnaught will

continue to be a leader for many

years to come.

Macnaught is an environmentally

responsible and globally

respected supplier of fluid

management solutions. Macnaught

is committed to:

• Efficient energy use practices

and production efficiency

• Waste minimisation and

recycling

• Pollution prevention

• Preservation of our unique local

environment and surrounding

ecosystems

• Research and development on

the environmental performance

of Macnaught products

• Meeting and exceeding

applicable legislation and

regulations

Through the active participation of

all employees in Macnaught’s

Environmental Management

System, Macnaught demonstrates

its commitment to responsible

environmental management and

continuous improvement.

macnaught.com.au

Macnaught has built up an

enviable reputation in more than

sixty countries around the world

for innovation with products and

packaging tailored specifically to

individual market needs. It’s

distributors are market leaders in

their respective countries and their

knowledge of the Macnaught

range means that assistance,

parts and servicing is never too far

away. While Macnaught is 100%

Australian owned, it has a strong

commitment to export markets.

Highlighting the importance

placed on export successes and

to service the growing needs in

multiple regions, Macnaught has

sales offices in Singapore,

Indonesia, USA and the UK.

5

Contents

Greasing Equipment

Hand Operated 6

Air Operated 11

Battery Powered 16

Dispensing Guns 17

Lubricators 18

Fittings 19

Fuel Handling Equipment

Hand Operated Fuel Equipment 20

Diesel Fuel Pumps 24

Oil Transfer Equipment

Hand Operated Oil Pumps 27

Hand Operated Chemical Pumps 31

Air Operated Oil Pumps 32

Oil Control Guns 39

Flow Meters

Fuel Meters 46

Water Meters 48

Oil Meters 49

Hose Reels

Retracta® Auto Rewind Hose Reels 50

Metal Reels 52

Oil And Grease Systems 54

Specialty Pumps 57

Fluid management & control systems 58

Accessories 60

Quick Selection Guide 69

6

greasing equipment - hand operated

K3 Super-Lube

super-lube®

K3

The K3 is a manual greasing system designed for powerful,professional greasing. A cost effective solution for all workshopgreasing requirements, Macnaught produces models to suit pailsfrom 12.5 kg (28 lbs) up to 22 kg (48 lbs) with depths of 310 mmto 430 mm.

Features

• includes pump unit, lid, rubber edged follower, 3 m (10 ft) x (1⁄2”) IDdelivery hose, and the high pressure, high volume KR grease gun (allcomponents available separately)

• spring loaded pump system provides 60 shots of grease

• suitable for greases up to and including NLGI No.2

• 360° swivel to prevent hose kinking

• fully sealed to prevent contamination

• optional TR5 drum trolley to provide portability

• 5 year warranty

• 10 year parts availability

Specifications

• wetted components:aluminium, steel, brass and nitrile rubber

• gun pressure (on high pressure):up to 69 000 kPa (10 000 psi, 690 bar)

• output:approx. 1.25 g on the high volume switchapprox. 0.45 g on the high pressure switch (to clear a blocked or seized nipple)

Accessories

• KZD Needlenose Coupler

• KZHY Hyperdermic Needlepoint coupler

• KFR Rigid/Flexible Extension

• KDF13 Flexible Extension

• TR5 Trolley

TR5 Trolly

7

mini-lube®

K6

The K6 is a portable, manual greasing system designed for useboth in workshop environments and for on site applications.Macnaught produces models to suit pail sizes from 2.5 kg (5 lbs) to5 kg (11 lbs) with depths of 146 mm to 225 mm.

Features

• includes pump unit, lid, rubber edged follower, 1.5 m (5 ft) x 1⁄2” IDdelivery hose, and the high pressure, high volume KR grease gun (allcomponents also available separately)

• K6-24 contains the above items plus a 2.5 kg (5 lbs) refillable container(KT5), while the K6-67 contains the above items plus a 5 kg (11 lbs)refillable container (KT6)

• spring loaded pump system provides 30 shots of grease




• 5 year warranty


Specifications


• gun pressure (on high pressure):up to 69 000 kPa (10 000 psi, 690 bar)

• output:approx. 1.25 g on the high volume switchapprox. 0.45 g on the high pressure switch (to clear a blocked or seized nipple)

Accessories

• KT5 (2.5 kg)/KT6 (5 kg) Grease Container





• KSR Standard Buttonhead Coupler


K6 Mini-Lube

KT5 (2.5 kg)/KT6 (5 kg) Grease Container

8


flexigunK29 450 g (15.9oz) cartridgeK29-Z Zinc version 450 g (15.9oz) cartridgeK32 400 g (14.5oz) cartridge

The Flexigun is a high quality pistol grip grease gun, incorporating aunique variable stroke operation. The Flexigun is able to reachincreased greasing pressures from short strokes and high greasingvolumes from full strokes.

Features

• one hand operation

• handles up to and including NLGI No.2 greases

• supplied complete with 230 mm (9”) flexible extension and KY coupler

• can be filled by bulk, cartridge or the J2 Grease Pump

• optional range of couplers and extensions available

• zinc version (K29-Z) available for use in underground coal mines

• fully repairable

• also available in the FGK1 Flexi Greasing Kit

• 5 year warranty


Specifications

• wetted components:aluminium, steel and nitrile rubber (and zinc for model K29-Z)

• output:up to 52 000 kPa (7 500 psi, 520 bar), 0.68 g per shot

Accessories





K29 Flexigun

FGK1 Flexi Greasing Kit

KFR Rigid/Flexible Extension

9


levergunK40 400 g (14.5oz) cartridgeK45 450 g (15.9oz) cartridge

The Levergun is a high quality, lever action grease gunmanufactured for professional use. Designed for high pressure, highvolume greasing, this classic gun can easily clear blocked ordamaged grease nipples.

Features

• two hand operation


• supplied complete with 170 mm (6 3⁄4”) rigid extension and KY coupler




• 5 year warranty


Specifications

• wetted components:aluminium, steel and nitrile rubber

• output:up to 69 000 kPa (10 000 psi, 690 bar), 1.5 g per shot

Accessories





K45 Levergun

KDF13 Flexible Extension

10


grease pumpJ2 Grease pumpJ2B Bucket pump

The J2 is a grease transfer pump designed for bulk filling greasedispensing equipment, and depending on model can fit pails from12.5 kg (28 lbs) up to 22 kg (48 lbs), or with depths of 315 mm to 390 mm. The J2 is an ideal workshop complement combiningeconomical bulk grease purchasing with the portability of a handoperated pump.

Features


• suitable for refilling hand operated grease guns (K29, K32, K45, K40), airoperated grease guns (K53, K54) and the 2.5 kg/5 kg Mini-Lube®containers (KT5, KT6)

• includes pump unit, lid and rubber edged follower (all components are alsoavailable separately)

• J2B Bucket Pump has a 1.5 m (5 ft) x (1⁄2”) ID delivery with hose (allcomponents also available separately) and 1/4” BSP thread instead of thefiller nozzle


• 5 year warranty


Specifications


• output:delivers 54 g per stroke

Accessories

• GBP1 Grease Bearing Packer

• TR5 Trolley

J2 Grease Pump

GBP1 Grease Bearing Packer

1111

greasing equipment - air operated

power-lube®

P3

The P3 is the ultimate in high pressure, air operated greasing. Withmodels available to suit containers from 12.5 kg (28 lbs) to 22 kg(48 lbs), it is fitted with a 50:1 ratio air motor and can operate offmost small compressors to provide fast, continuous greasing.

Features

• suitable for underground coal mine use

• non-corroding air motor which operates quietly

• complete unit supplied with pump, lid, rubber edged follower plate, 4m (13ft) x 6mm (1⁄4”) ID SAE 100 R2 delivery hose, and B2 Booster Gun with360° high pressure ZSB swivel (all components are available separately)


• optional trolley available (TR5) for a portable system

• no requirement for air line lubricator

• 5 year warranty


Specifications

• wetted components: zinc and hard chrome plated carbon steel, brass, and nitrile andpolyurethane rubber

• output: approx. 460 g of NLGI No.2 grease per min.

• max. air pressure: 1 030 kPa (150 psi, 10.3 bar)

• min. air pressure: 400 kPa (60 psi, 4 bar)

• min. compressor size: 0.08 m3/min (3 cfm)

• air inlet: 1⁄4” NPT (F)

• pump ratio: 50:1 (grease pressure is 50 times air)

• B2 gun pressure: up to 69 000 kPa (10 000 psi, 690 bar) (boost pressure)

• hose thread: 1⁄4” NPT (M)

Accessories

• PDF13 Push On Extension


• TA-4K Pressure Regulator Kit

• KZDXL Straight Needlepoint Coupler

• KRV Pressure Release Valve

TA-4K Pressure Regulator Kit

12


maxi-lube®

P6

The P6 is a 50:1 ratio pump offering all the same features as theP3, yet has models available to suit grease containers from 50 kg(110lbs) to 55 kg (120lbs).

Features



• complete unit supplied with pump lid, rubber edged follower plate, 4 m (13 ft) x 6 mm (1⁄4”) ID SAE 100 R2 delivery hose, and B2 Booster Gunwith 360° high pressure ZSB swivel (all components are availableseparately)



• optional trolley available (TR6) for a portable system

• 5 year warranty


Specifications

• wetted components:zinc and hard chrome plated carbon steel, brass, and nitrile and polyurethane rubber

• output:approx. 460 g of NLGI No.2 grease per min.

• max. air pressure:1 030 kPa (150 psi, 10.3 bar)

• min. air pressure:400 kPa (60 psi, 4 bar)

• min. compressor size:0.08 m3/min (3 cfm)

• air inlet:1⁄4” NPT (F)

• pump ratio:50:1 (grease pressure is 50 times air pressure)

• B2 gun pressure:up to 69 000 kPa (10 000 psi, 690 bar)

• hose thread:1⁄4” NPT (M)

Accessories

• TR6 Trolley




• KZDXL Straight Needlepoint Coupler

• KRV Pressure Release Valve

TR6 Trolley

131313

maxi-lube®

P8

A larger version of the P6, the P8 is a 50:1 ratio pump is designedto fit 180 kg (400 lbs) grease containers.

Features



• P8 complete unit includes the pump unit, lid, rubber edged follower plate,2.5 m (8 ft) x 6 mm (1⁄4”) ID delivery hose, and B2 Booster Gun with360° high pressure ZSB swivel.

• lid and follower assembly available separately (P8LF)

• pump unit available separately (P8-01)

• a unique follower plate which incorporates a release valve and removalsystem

• includes bleeder valve for ease of priming when changing grease drums



• 5 year warranty


Specifications

• wetted components: zinc and hard chrome plated carbon steel, brass, and nitrile andpolyurethane rubber

• output:approx. 460 g of NLGI No.2 grease per min.

• max. air pressure:1 030 kPa (150 psi, 10.3 bar)




• pump outlet: 1⁄4” NPT (F)


• B2 Gun pressure:up to 69 000 kPa (10 000 psi, 690 bar)

• hose thread:1⁄4” NPT (M)


Accessories


• ACK2 Aviation Kit

• CK2 Industrial Greasing Accessory Kit

• TR205 Trolley

TR6 Trolley

14

grease equipment - air operated

high flowR5000G

The R5000G is a 58:1 ratio pump designed to fit 180 kg (400lbs)grease container. It has a 4” air motor similar to R500 and R1000pumps. This pump is ideal for inclusion into large systeminstallations such as service bays.

Features

• a strong metal 4” diameter air motor and durability proven in the R500 andR1000 series pump

• with silencer incorporated into the aluminium alloy pump body to ensurepump works quietly

• reduced ice build up in the air motor while running in the colder weather

• individual components include the pump unit (model R5000G), lid, rubberedged follower plate delivery hose and B2 booster gun with 360˚ highpressure ZSB swivel All of these are supplied when the R5000 GPLF isordered.

• model R5000GLF contains lid and follower assembly only

• model R5000G is pump unit only

• a unique follower plate which incorporates a release valve and removalsystem.

• includes air line lubricator and preset air regulator 700 kPa (100 psi)

• handles up to and including NLGI No.2 grease

• 5 year warranty

• 10 years parts availability

Specifications

• wetted components:zinc and hard chrome plated carbon steel, nitrile and polyurethane rubber

• output:approx. 630 g of NLGI No.2 grease per min (free flow)

• max. air pressure:700 kPa (100 psi, 7 bar)




• pump outlet3/8” in BSPT or NPT


• B2 Gun Pressure:up to 69 000 kPa (10 000 psi, 690 bar)

15151515

power-pistolK53 450 g (14.9 oz) cartridgeK54 400 g (14.5 oz) cartridge

The Power-Pistol is a single shot air operated grease gun providingthe convenience of portability with effortless air operation. The gunis capable of operating at low air consumption, making it the idealtool for use with trucks and buses utilising the air brakecompressor.


Features



• one handed, single shot trigger operation

• supplied with 230 mm (9") flexible extension (KF9) and KY coupler



• 5 year warranty


Specifications


• output:approx. 0.7 g per shot

• pressure ratio:50:1 (grease pressure is 50 times air pressure)

• max. air pressure:825 kPa (120 psi, 8 bar) (recommended is 620 kPa, 90 psi, 6 bar)

• min. air pressure:275 kPa (40 psi, 2.75 bar)


• air inlet:1⁄4” BSP (M)

Accessories

• KZD Needlehose Coupler

• KZHY Hyperdermic Needlepoint Coupler


K53 Power-Pistol

KFR Rigid/Flexible Extension

16

powergunBG100

The BG100's unique design gives it balance, and makes routinegreasing quicker and easier while reducing operator fatigue.It is ideal for any workplaceenvironment whereconstant greasing andportability isrequired.

greasing equipment - battery powered

Features

• ergonomic design

• simple one handed, trigger operation

• continuous operation and faster greasing

• models available to suit 400 g and 450 g cartridges

• supplied with a heavy duty moulded carrying case

• 30” (762 mm) flexible extension hose for greasing those hard to reachnipples

• several filling options available - bulk, cartridge or via the J2 grease pump

• fast battery recharge capability of just 1 hour from flat

• fitted with an internal pressure relief valve

• 5 year warranty (12 months on battery and charger)

• 10 year guaranteed parts availability

Specifications

• wetted components: aluminium, steel and nitrile rubber

• output:

60 g (2.11oz)/min at free flow

• maximum pressure:

34 500 kPa (5 000 psi, 345 bar)

• minimum temp:

0˚C/32˚F

• maximum temp:

50˚C/122˚F

• battery voltage:

12 volt NiCad

• battery capacity:

1300 mAh

• est. battery life:

up to 3 cartridges

• weight:

3 kg (6.6lbs)

Accessories


• KZHY Hyperdermic Needlepoint Coupler


• KSR/KGR Buttonhead Coupler

BG100 Powergun

1717171717

booster gunB2

pressurite gunKR

greasing equipment - dispensing guns

Features

• suitable for air powered greasing applications

• supplied as a standard gun on the P3, P6 and complete grease pumps

• optional extra with P8 Maxi-Lube®

• a couple of simple presses of the trigger will double output pressure

• supplied with 360° ZSB Swivel

• 5 year warranty


Specifications

• wetted components:mild steel and nitrile rubber

• max. operating pressure:69 000 kPa (10 000 psi, 690 bar)

• swivel inlet:1⁄4” NPT (F)

Accessories

• PF9 Flexible Extension

• PF17 Flexible Extension

Features

• suitable for manual powered greasing applications

• supplied with the K3 Super lube® and K6 Mini lube®

• can deliver grease at either high volume or high pressure



• 5 year warranty


Specifications

• wetted components: aluminium, steel and nitrile rubber

• gun pressure:up to 69 000 kPa (10 000 psi, 690 bar)

• output:approx. 1.25 g on the high volume switch and approx 0.45 g on the highpressure switch (to clear a blocked or seized nipple)

Accessories

• KF9 Flexible Extension/KDF13 Flexible Extension

• KZD Needlenose Coupler/KZHY Hyperdermic Needlepoint Coupler

18

rapid-floGP

The GP is a durable, high quality impellor pump incorporating agearbox for high output (up to 100 L per minute) and easyoperation. Designed for 205 L (55 US g) or 60 L (16 US g) drums,this pump is ideal for any fuel transfer task.

Features

• pumps diesel, petrol, av gas, kerosene and lubricating oils up to SAE 30

• ideal for high volume aviation fuel transfer

• pumps easily in both directions

• supplied with a 2.4 m (8 ft) anti-static rubber delivery hose and nozzle, and1.06 m (3.5ft) two piece threaded suction tube

• lockable handle and built-in nozzle holder

• in-built strainer

• 50 mm (2”) bung adaptor

• optional 10 µm GB fuel filter available

• optional HNU nozzle for unleaded fuel

• 5 year warranty


Specifications

• wetted components:aluminium, steel, and nitrile and viton rubber

• output:up to 100 L (26 US g) per min.

Accessories

• GB Fuel Filter

• DM100 Fuel Meter

• DG-01 Connector Kit

• HNU Nozzle

fuel equipment - hand operated

HNU NozzleGB Fuel Filter

19


litre-strokeHP

The HP Litre-Stroke has an easy lever action and is designed foreither 205 L (55 US g) or 60 L (16 US g) drums. The pump is builtfor very harsh working conditions and is ideal for most types of fueltransfer operations when an economical and long lasting pump isrequired.

Features

• pumps diesel, petrol, kerosene and lubricating oils up to SAE 30

• supplied with a 2.4 m (8 ft) anti-static rubber delivery hose and HNUnozzle, and 1 m (3.3ft) two piece threaded suction tube

• lockable handle and built-in nozzle holder

• 50 mm (2”) bung adaptor

• optional 10 µm HA fuel filter available

• 5 year warranty


Specifications

• wetted components:steel, acetal, zinc and nitrile rubber

• output:up to 40 L (10 US g) per min., or 1 L (1 quart) per stroke

Accessories

• HAFuel Filter


• DH-01 Connector Kit

DM100 Fuel MeterHA Fuel Filter

20

rotary booster pumpRB

This economical rotary pump is designed to reliably dispensevarious types of lubricating oils and fuels up to 75 L (20 US g) perminute from 60 L (16 US g) or 205 L (55 US g) drums.

Features

• pumps diesel, petrol, kerosene and lubricating oils up to SAE 30

• rotary action allows for pumping in both directions

• supplied with 1.8 m (6 ft) delivery hose with metal nozzle and nozzle holder

• the Rotary Booster is supplied with a three piece threaded suction tubeand 2” sliding bung adaptor

• optional 10 µm VA fuel filter available separately

• 5 year warranty


Specifications

• wetted components:aluminium, steel, plastic and nitrile rubber

• output:up to 75 L (20 US g) per min., or 1 L (1 quart) per rotation. The 3:1 ratiogearing means that for every complete handle turn, the rotor turns 3 times

• outlet port:25 mm (1")

Accessories

• VA Fuel Filter


• DV-01 Connector Kit


DM100 Fuel MeterVA Fuel Filter

2121212121


rotary vane pump PVR Rotary Vane PumpPVRH Rotary Vane Pump with hose

These economical rotary pumps are designed to dispense varioustypes of lubricating oils and fuels up to 20 L (5 US g) per minutefrom 60 L (16 US g) to 205 L (55 US g) drums.

Features

• pumps diesel, kerosene and lubricating oils up to SAE 90

• rotary action allows for pumping in both directions

• supplied with a telescopic suction tube and a 2” sliding bung adaptor

• PVRH is supplied with a 1.8 m (6 ft) delivery hose with metal nozzle andnozzle holder

• optional 10 µm VA fuel filter available separately

• 5 year warranty


Specifications

• wetted components:aluminium, steel, plastic and nitrile rubber

• output:up to 20 L (5 US g) per min

Accessories

• VA Fuel Filter


• DV Connector Kit

PVRH

22

electric diesel pumpGE12M 12 V (Manual)GE12A 12 V (Automatic)GE24M 24 V (Manual)GE24A 24 V (Automatic)

A reliable 12 or 24 volt range of quality pumps designed for thetransfer of diesel and kerosene from storage tanks or drums intofarm, transport and earthmoving vehicles.

Features

• portable

• continuous duty cycle

• built-in fan

• self priming

• built-in pressure relief valve

• vane style pump

• consumption 18-24 amps - 12 volt9-17 amps - 24 volt

• detachable nozzle holder

• 3/4” BSP inlet/outlet thread

• 3 piece suction tube

• 3 m x 19 mm (3/4”) outlet nose

• manual or automatic nozzle

• flowrate 50 L/min (free flow)

• 5 year warranty


Accessories

• TM100 Meter

• HA1S Filter

• DF-01 Connector Kit

fuel equipment - electric pumps

GE12M

TM100 Fuel Meter


hi-flow electric dieselpumpGEHFX 12M (Manual)GEHFX 12A (Automatic)

A reliable 12 volt high flow diesel pump pump range designed toprovide high flow diesel transfer.

Features

• portable

• self priming


• continuous duty cycle

• built-in fan

• vane style pump

• consumption 35-53 amps

• flowrate 75 L/min (free flow)

• key lock start

• 1” BSP inlet/outlet thread

• 1” I/O x 1.7 m long suction hose

• 1” I/O x 4 m long delivery nose

• manual or automatic nozzle

• weight 11.9 kg

• 5 year warranty


Accessories

• TM100 Meter

• HA1S Filter

GEHFX 12M

232323232323

24

hi-flow mini bowserGEMB240A

This 240 volt hi-flow mini bowser is a complete refilling systemdesigned for accurate hi-flow diesel refilling.

Features

• cabinet

• flowmeter (accuracy +/-1%)

• automatic nozzle holder with built-in shut-off

• 4 m x 1” I/O delivery hose

• automatic nozzle


• vane style pump

• rated at IP55

• flowrate 90 L/min

• thermal overload protection

• 5 year warranty



25252525252525

oil transfer equipment - hand operated

spring loaded pumpS20H Spring Pump (20 L drums)S60H Spring Pump (60 L drums)S20HA Spring Pump with Filter (20 L drums)S60HA Spring Pump with Filter (60 L drums)

The Spring Loaded Oil Pumps provide the means to automaticallydispense engine and gear oils by simply pressing the oil gun trigger.

Features

• suitable for engine and gear oils up to SAE 140

• oil drain back facility on pump head

• kink resistant hose


• 5 year warranty

Specifications

• wetted components: aluminium, steel, zinc, brass, polypropylene, nitrile rubber and PVC

• output (20 L model): 340 mL per stroke (3 strokes per L)

• output (60 L model): 500 mL per stroke (2 strokes per L)

Accessories

• TR60 Trolley (60 L drums)

• TR6 Trolley (60 L drums

• TR5 Trolley (20 L drums)

S20H

TR6 Trolley

26

multi purpose pumpA2 Multi purpose PumpA2H Multi purpose Pump with Hose

A quality pump ideal for transferring a wide range of mineral oilsand non-corrosive solvents.

Features

• suitable to pump diesel fuel, lubricating oils up to SAE 90 and other non-corrosive fluids.

• A2H supplied with 1.8 m (6 ft) delivery hose and metal nozzle

• with the replacement o’rings (nitrile, viton and EPDM) supplied with everypump, the pump can also be used to pump a wide range of non corrosivesolvents and chemicals. To ascertain o’ring compatibility, check our website,or speak with the liquid manufacturer (quoting the wetted componentslisted below)

• variable handle setting for light or heavy fluids

• telescopic suction tube fits 60 L (16 US gal) to 205 L (55 US gal) drums

• convenient bung opener cast on pump head

• fully serviceable


• 5 year warranty

Specifications

• wetted components: aluminium, steel, brass and Teflon

• output: approx. 250 mL per stroke


A2H

2727272727272727


oil pumpsC4 Oil PumpC4-Z Zinc Oil PumpC4H Oil Pump with Hose

These fully serviceable, long life, low cost pumps have beenengineered for trouble free use and can be used with a wide varietyof non-corrosive liquids. Pump operates on the lift stroke.

Features

• suitable for kerosene, two stroke mix and non-corrosive solvents up toSAE 30

• sliding bung adaptors suit containers from 15 L (4 US g) to 25 L (6 US g)

• zinc versions are available for use in underground coal mines (C4-Z)

• C4H comes with 1.8 m hose and non-drip nozzle



• 5 year warranty

Specifications

• wetted components: aluminium, steel, nitrile, delrin and zinc (C4-Z)• output approx. 100 mL on the lift stroke

C7 Oil PumpCF7 Oil Pump with FilterC7-Z Zinc Oil PumpCF7-Z Zinc Oil Pump with Filter

These fully serviceable, long life, low cost pumps have beenengineered for trouble free use and can be used with a wide varietyof non-corrosive liquids. Pump operates on the downstroke.

Features

• suitable for kerosene, two stroke mix up to and SAE 140

• sliding bung adaptors suit containers from 15 L (4 US g) to 25 L (6 US g)

• zinc versions are available for use in underground coal mines



• 5 year warranty

Specifications

• wetted components: aluminium, steel, nitrile, delrin and zinc (C7-Zand CF7-Z only)

• output: approx. 100 mL on the down stroke

C4

C7

28

suction gunC16

The C16 is ideal for use with mineral oils to get them both into andout of gearboxes, transfer cases and differentials. Another usefulapplication is to use the C16 to evacuate the sump of an inboardmarine engine.

Features

• suitable for use with mineral oils up to SAE 90

• 500 mL capacity


• 5 year warranty


gear oil pumpsC11 Gear Oil Pump (205 L drums)C13 Gear Oil Pump (60 L drums)

These fully serviceable, long life, low cost pumps have beenengineered for trouble free use specifically for heavy gear oils.

Features

• ideal for pumping heavier gear oils up to SAE 140

• supplied with a 1.8 m (6 ft) delivery hose with non drip nozzle and built-inhose hanger

• an optional CF strainer for auto transmission and hydraulic fluids alsoavailable


• 5 year warranty

Specifications

• wetted components:aluminium, steel, brass, nitrile and Teflon

• output: approx 75 mL per stroke

• accessories: cf strainer

C16

C13

CF Strainer

2929292929292929

chemical hand pumpCHP

The CHP hand pump is made from nylon with stainless steelplunger rod and teflon seals and is designed to transfer a widerange of fluids and chemicals.

Features

• delivers 400 mL per stroke

• delivers on the up stroke

• sliding bung adaptor

• suitable for 60 L to 205 L containers

specialty pumps - hand operated

chemical lever pumpPNY

The PNY lever action chemical pump is manufactured from nylon66 and provides a safe, economical and efficient means oftransferring a wide range of fluids and chemicals.

Features

• 500 mL (1 Pint) per stroke

• telescopic suction tube

• designed to suit 60 L - 205 L containers

• lever action

stainless steelchemical hand pumpMCHP090D

The MCHP090D Stainless Steel Hand Pump has been designedutilising stainless steel components and teflon seal. This allows thepump to be used to pump a wide range of fluids and chemicals.

Features

• 400 mL per stroke

• delivers on up stroke

• sliding bung adaptor

• suitable for 60 L to 205 L containers

• materials 316 stainless steel teflon ‘o’ ring seal

PNY

MCHP090D

CHP

30

oil transfer equipment - air operated

oilmaster®

ratio oil pumpsT112

The Oilmaster® T112 is a reliable 1:1 ratio oil pump is designed totransfer oils up to 10 metres and can be used with any ofMacnaught’s hose end gun range.

Features

• stub pump for inclusion in a workshop or mobile bulk oil system

• suitable for oils up to SAE 140, automatic transmission fluid, engine oil,gear oil and hydraulic oils

• 2” (M) bung adaptor supplied


• optional TB25S telescopic suction tube available

• 5 year warranty


Specifications

• wetted components: aluminium, zinc and hard chrome plated carbon steel, brass, and nitrile and polyurethane rubber

• pump ratio: 1:1 (oil pressure is the same as air pressure)

• output: 27 L/min (7 US gal per min) of SAE 10oil at 690 kPa (100 psi) air pressure (free flow)



• min. air compressor: 0.3 m3/min, (10 cfm)


• pump inlet: 1” BSP or NPT (F) and 1” UNEF

• pump outlet: 3⁄4” BSP or NPT (F)

Accessories

• TB25s Telescopic Suction Tube or TB26s

• TD20 Wall Bracket


• TB-20K Oil Feeder Hose

Fluid Free flow (per min.) at Output (per min.)pump outlet through 3 m (10 ft) x

19 mm (3⁄4") hose, and hose end oil delivery gun

Litres US Gal Litres US GalOil SAE 10 27 7 10 2.6Oil SAE 30 23 6 8.5 2.2Oil SAE 90 22 5.8 7 1.8

*flow rates are a guide only and any variations can depend on system setup*flow rates at 690 kPa (100 psi) air pressure

TD20 Wall Bracket

31313131313131313131


oilmaster®

ratio oil pumpsT312

The Oilmaster T312® is a reliable 3:1 ratio oil pump is designed totransfer oils up to 30 metres and can be used with any ofMacnaught’s retractable reels and hose end gun range.

Features






• 5 year warranty


Specifications


• pump ratio: 3:1(oil pressure is 3 times the air pressure)




• min. air compressor: 0.08 m3/min. (3 cfm)




Accessories





Fluid Free flow (per min.) at Output through 3 m (30 pump outlet ft) x 12.5 mm (1⁄2") hose,

10 m (33 ft) x 12.5 mm (1⁄2")hose reel and hose end

oil delivery gunLitres US Gal Litres US Gal

Oil SAE 10 15 4 10 2.6Oil SAE 30 13 3.4 7 1.8Oil SAE 90 10 2.6 6 1.6


TB20K Oil ZFeederhose

32


oilmaster®

ratio oil pumpsT512T512Z Zinc Version

The Oilmaster® T512 is a reliable 5:1 ratio oil pump designed todispense lubricating oils up to 50 meters from bulk tanks or drumsthrough pipelines, Macnaught’s Retracta® hose reels, and hose enddelivery guns with or without a meter.

Features






• 5 year warranty


Specifications






• min. air compressor: 0.08 m3, (3 cfm)




Accessories





Fluid Free flow (per min.) at Output (per min.)pump outlet through 9 m (30 ft) x

12.5 mm (1⁄2") hose,10 m (33 ft) x 12.5 mm

(1⁄2") hose reel and hose end oil delivery gun

Litres US Gal Litres US GalOil SAE 10 12 3.2 6 1.6Oil SAE 30 11.5 3.0 5 1.4Oil SAE 90 11 2.9 3.5 0.93


TB25s Telescopic Suction Tube

33

R100S


r-series ratio oil pumpsR100S – stub pumpR100T – drum pumpR100THG – complete system

The R100 is a 1:1 heavy duty ratio oil pump designed to transferoils up to 10 metres and can be used with any of Macnaught’shose end gun range.

Features

• suitable for oils up to SAE 140, automatic transmission fluid, diesel,kerosene, anti-freeze/anti-boil

• designed to fit from 60 L (16 US g) to 205 L (55 US g) drums (optionalsuction tube available for stub version) (TB17s)

• 2” (M) bung adaptor and oil lubricator supplied (TA-3K)

• the R1000THG (complete system) includes the R100T drum pump, 3 m(10 ft) reinforced delivery hose and trigger action dispensing nozzle

• 5 year warranty


Specifications

• wetted components: aluminium, nitrile rubber, Carbon PTFE, zinc plated carbon steel and brass


• output: 60 L/min (16 US gal per min) of SAE 10 oil at 690 kPa (100 psi) air pressure (free flow)

• suction tube length: R100S (stub) 220 mm (83⁄4”)

R100T (drum) 910 mm (36”)



• min. air compressor: 0.22 m3/min (8 cfm)



• foot valve inlet: 1” BSP or NPT (F) (stub only)

Accessories


• TB17Ss Suction Tube


Fluid Free flow (per min.) at Output (per min.) pump outlet through 3 m (10 ft) x

19 mm (3⁄4") hose and HG20R oil delivery gun

Litres US Gal Litres US GalOil SAE 10 60 15.8 12 3.1Oil SAE 30 50 13.3 9 2.3Oil SAE 90 47 12.4 4 1Oil SAE140 39 10.2 3 0.8Diesel 58.5 15.5 13 3.4Kerosene 57 15.1 11.5 3.0


R100T

TA-4K Pressure Regulator Kit

34

R300S


r-series ratio oil pumpsR300S – stub pumpR300T – drum pump

The R300 is a 3:1 heavy duty ratio oil pump that can transfer oilsup to 30 metres (98 ft) through multiple hose reels and meter/gunsystems.

Features

• suitable for oils up to SAE 140, automatic transmission fluid, diesel,kerosene, anti-freeze/anti-boil

• designed to fit from 60 L (16 US g) to 205 L (55 US g) drums (optionalsuction tube available for stub version) (TD42S)

• 2” (M) bung adaptor and oil lubricator supplied (TA-3K)

• the stub version (R300S) can be easily wall mounted

• 5 year warranty


Specifications

• wetted components: aluminium, nitrile rubber, Carbon PTFE, zinc plated carbon steel and brass

• pump ratio: 3:1 (oil pressure is 3 times air pressure)


• suction tube length: R300S (stub) 210 mm (81⁄2”)

R300T (drum) 900 mm (351⁄2”)






• foot valve inlet: 3⁄4” BSP or NPT (F) (stub only)

Accessories

• TD42S Suction Tube

• TD-25K Oil Feeder Hose

• OLP100 Low Pressure Oil Reel


Fluid Free flow (per min.) at Output (per min.) pump outlet through 3 m (10 ft) x

19 mm (3⁄4") hose and 10 m (33ft) x 12.5 mm (1⁄2")

reel & HG60 gun Litres US Gal Litres US Gal

Oil SAE 10 23 6 15 3.9Oil SAE 30 20 5.2 9 2.3Oil SAE 90 17 4.4 6 1.6Oil SAE 140 14 3.7 4 1Diesel 23 6 18 4.7Kerosene 22 5.8 17 4.5


R300T


35

R500S


r-series ratio oil pumpsR500S – stub pump R500T – drum pump

The R500 is designed for workshops requiring fluid transfer overdistances up to 50 metres. It is perfect for use with drums andtanks, and through pipelines, one or multiple hose reels andmeter/gun dispensing systems.

Features

• suitable for automatic transmission fluid, engine oil, gear oil, hydraulic oil,anti-freeze/anti-boil and compatible fluids up to SAE 140

• suitable for 205 L (55 US g) drums and bulk tanks (optional telescopicsuction tube available for stub version) (TB25S)

• the stub version (R500S) can be easily wall mounted

• built in pressure relief valve for safe operation

• oil lubricator (TA-3K) and 2” (M) bung adaptor supplied

• 5 year warranty


Specifications

• wetted components: aluminium, nitrile rubber, Carbon PTFE, zinc plated carbon steel



• dimensions: R500S (stub) 635 mm x 120 mm x 120 mm R500T (drum)1325 mm x 120 mm x 120 mm






• foot value inlet: 1” BSP or NPT (F) and 1” UNEF (stub version)

Accessories

• TB25S or TB26S Suction Tube

• Telescopic


• OMP100 Medium Pressure Oil Reel

• MOTP1920 Twin Pedestal Oil Reel

Fluid Free flow output Output (per min.) Output (per min.) (per min.) at the through 30 m (98 ft) x through 30 m (98 ft) x

pump 10 mm (3⁄8") hose and 12.5 mm (1⁄2") hose hose end gun @ and hose end gun @

690 kPa/100 psi (air) 690 kPa/100 psi (air)Litres US Gal Litres US Gal Litres US Gal

Oil SAE 10 28 7.4 6.2 1.7 8.8 2.4Oil SAE 30 27 7.2 4.05 1.1 6 1.6Oil SAE 90 26 6.9 2.3 0.7 3 0.8


R500T


36

R1000S


r-series ratio oil pumpsR1000S – stub pumpR1000T – drum pump

The R1000 10:1 ratio oil ratio pump is the latest addition to therange and has been designed for workshops and systems requiringoil transfer of distances up to 100 metres. It is ideally suited for usewith bulk tanks and drums and utilising multiple hose reels andmeter/gun dispensing systems.

Features

• suitable for automatic transmission fluid, engine oil, gear oil, hydraulic oil,anti-freeze/anti-boil and compatible fluids up to SAE 140

• suitable for 205 L (55 US g) drums and bulk tanks (optional telescopicsuction tube available for stub version) (TD42S

• the stub versions can be easily wall mounted

• built in pressure relief valve for safe operation

• oil lubricator (TA-3K) and 2” (M) bung adaptor supplied

• 5 year warranty


Specifications

• wetted components: aluminium, nitrile rubber, Carbon PTFE, zinc plated carbon steel



• dimensions: R1000S (stub) 605 mm x 120 mm x 120 mm

R1000T (drum) 1297 mm x 120 mm x 120 mm






• foot value inlet: 3/4” BSP or NPT (F) (stub version)

Accessories

• HGFEX Flexible Extension

• Multi coloured shrouds

• HGFM Flexible Metal Extension

Fluid Free flow (per min) Output (per min.) at pump outlet through 35 m (115

ft) x 12.5 mm (1⁄2") hose and hose end

gun @ 690 kPa/100 psi (air)Litres US Gal Litres US Gal

Oil SAE 10 15 4.0 10 2.6Oil SAE 30 15 4.0 6 1.6Oil SAE 90 14 3.7 4.6 1.2


R1000T

TA-4K Pressure Regulator

37

oil transfer equipment - oil control guns

oil control gunHG20F Oil Control Gun with Flexible OutletHG20R Oil Control Gun with Rigid Outlet

These oil control guns are of high quality and easy to use in anyworkshop in conjunction with air operated oil systems up to 7:1ratio (R100, R300, R500 and the Oilmaster® pump range).

Features

• dispenses lubricating oils up to SAE 140, and ethylene glycol (anti-freeze/anti-boil)

• utilises a straight through flow path to reduce pressure drop

• latching trigger for ease of use

• incorporates a ball bearing swivel inlet to ensure smooth operation andprevent the hose from kinking

• non-drip automatic delivery nozzle

• 5 year warranty


• trigger guard

Specifications

• wetted components:aluminium, mild steel, nitrile rubber

• max. operating pressure:7 000 kPa (1000 psi, 70 bar)

• flow rate:up to 25 L/min (6.5 US gal per min)

• max. operating temp:70°C (158°F)

• inlet connection:1⁄2” BSP or NPT (F)

• weight (approx):800 g (1.8 lbs)

Accessories

• IM50 meter

HG20F

HG20R

IM50 Meter

38

dispensing equipment - oil control guns

high flow oil delivery gunHG100 Oil Delivery GunHG100-Z Zinc Oil Delivery GunHG100-75 Oil Delivery Gun with Electronic Flow Meter

The HG100 is a feature packed high flow gun designed to shiftlarge volumes of fluid quickly and easily. The gun is also available inzinc, for use in the mining industry.

Features

• dispenses lubricating oils up to SAE 140, automatic transmission fluid,anti-freeze/anti-boil, and diesel oil

• flexible 3⁄4” ID hose with manual nozzle

• latching trigger for ease of use

• trigger guard for protection

• lockable trigger for anti-theft security

• hanging hook

• balanced valve assembly allows maximum flow control

• the HG100-75 includes an IM75 electronic oil meter

• 5 year warranty


Specifications

• wetted components:aluminium/zinc, mild steel, nitrile rubber

• flow rate:up to 57 L/min (15 US gal per min)

• max. operating pressure:10 340 kPa (1 500 psi, 103 bar)

• max operating temp:70ºC (158ºF)

• inlet swivel:3⁄4” BSP or NPT (F)

• weight (with fittings):2.2 kg (5 lbs)

HG100

HG100-75

39


mechanical hose end gunsHG40 Manual Hose End Gun

This popular model has an easy to read mechanical display andsingle reset button.

Features

• dispenses up to 30 L/min (8 US gal per min)

• suitable for dispensing engine oil, diesel oil, automatic transmission fluidand anti-freeze/anti-boil, with a maximum viscosity of SAE 140

• uses oval gear meter for optimum accuracy

• four digit resettable batch totaliser

• six digit accumulative totaliser

• automatic non drip nozzle

• latching handle with trigger lock (non latching model available)


• two outlet nozzle positions (in-line or 90 degrees)

• supplied complete with rigid extension

• shock resistant

• 5 year warranty


Specifications

• wetted components: aluminium, acetal, steel, nitrile rubber

• accuracy: +/- 1% (of reading)

• flow range: 1-30 L/min (0.26 – 8 US gal/min)

• max. pressure: 10 350 kPa (1 500 psi, 103.5 bar)

• pressure loss: 100 kPa (14.4 psi, 1 bar) @ 12 L/min (3.2 ....US gal/min) (without nozzle) with calibration ...fluid

• weight: 1.16 kg (2.55 lbs)

• swivel inlet: 1⁄2" BSP or NPT (F)

• accessories: 25.8 cm (10") l x 9.5 cm (3.7") h x 11 cm (4.3") w

Accessories• HGFEX Flexible Extension



HGFEX Flexible Extension

40


mechanical hose end gunsHG45 Auto Shutoff Hose End Gun

Utilising the time proven oval gear principal of positive displacementfluid measurement, the HG45 Preset Mechanical is a highlyaccurate, metered control handle ideal for use in all automotive,transport and workshop installations

Features


• oval gear design

• settable volume up to 99.9 litres/US quarts

• easy to use thumbwheels for accurate volume setting - simply depresswheel and rotate

• able to set to decimal accuracy

* easy to read 5 digit non-resettable total and 3 digit resettable batch total


• straight through flow path reduces pressure drop

• can be used without the preset function if required

• no batteries to fail

• simple handle latch design

• 5 year warranty

• 10 year guarantee parts availability

Specifications


• accuracy: +/- 1% (of reading)




• weight: 1.16 kg (2.55 lbs)

• swivel inlet: 1⁄2” BSP or NPT (F)

Accessories




Multi Coloured Shrouds

41


electronic hose end gunsHG50 Alarm Hose End Gun

Features


• suitable for dispensing engine oil, diesel oil, automatic transmission fluidand anti-freeze/anti-boil, with a maximum viscosity of SAE 140.

• in addition to the standard manual and auto mode functions, there are fivevariable preset totals available for use


• three digit resettable batch totaliser


• sleep mode; electronics ‘go to sleep’ to preserve the life of the twostandard AA batteries if the gun is not used for 2 minutes


• EEPROM retention allows all information to be retained if batteries are removed





• shock resistant

• 5 year warranty


Specifications


• accuracy: +/- 0.5% (of reading)




• weight: 1.16 kg (2.55 lbs)

• swivel inlet: 1⁄2” BSP or NPT

• operating temp: 0° - 50° C (32° - 122° F)

• storage temp: -10° - 60° C (14° - 140° F)

• battery: 2 x 1.5 volt alkaline AA

Accessories




HGFM Flexible Metal Extension

42


electronic hose end gunsHG55 Electronic Hose End Gun

Features













• shock resistant

• 5 year warranty


Specifications






• weight: 1.16 kg (2.55 lbs)



• storage temp: -10° - 60° C (14° - 140° F)


Accessories

• HG FEX Flexible Extension



Multi Coloured Shrouds

43


electronic hose end gunsHG60 Auto Shutoff Hose End Gun

Features




• in addition to the standard manual and auto mode functions, there are fivevariable preset totals available for use










• shock resistant

• 5 year warranty


Specifications






• weight: 1.16 kg (2.55 lbs)



• storage temp: -10° - 60° C (14° - 140° F)


Accessories




4444

flow meters - fuel meters

fuel meterDM100 Flow MeterDM150 Flow Meter plus Filter

The DM100 has been designed to measure diesel, kerosene andpetrol, and is made from corrosion resistant aluminium with easy toread mechanical register.

Features

• oval gear design

• low pressure drop allows for gravity and pump (in-line) applications

• register cap can be easily removed and rotated to every 90˚ orientation for display reading

• supplied with integrated mesh strainer

• 5 year warranty


Specifications

• wetted components:aluminium, zinc plated carbon steel, nitrile, viton

• accuracy: +/- 1% of reading

• flow range: 3 - 80 L/min (0.8 - 21 US gal/min)

• max. pressure: 1 000 kPa (145 psi, 10 bar)

• register – totaliser:0 – 999,999 L (gal)

• register – reset:0 – 999.9 L (gal)

• max. temp: 80° C (176° F)

• inlet thread:1” BSP or NPT (F) 1” BSPT, 1” BSPPL(G) or 1” NPT female

• outlet thread:1” BSP or NPT (F) 1” BSPT, 1” BSPPL(G) or 1” NPT female

• weight: 1.2 kg (2.6 lbs)

Accessories

• DF Connector Kit – DM100 to GE12/24 Diesel pumps

• HA1S Filter

• DH Connector Kit - HP Pump

• DG Connector Kit - GP Pump

• DV Connector Kit - PVR/RB Pumps

DM100

DM150

4545

flow meters - fuel meters

turbine fuel meterTM100 (LCD)TM100P (Pulse Output)

The TM100 turbine flowmeter has an excellent turndown ratio andis factory calibrated for precise measurement of low viscosity fluids.The low pressure drop and high pressure rating allows the turbinemeter range to be used in gravity, pump and inline applications.

Features

• available in LCD (TM100) and pulse (TM100P) versions

• high accuracy (better than ± 3 % of reading)

• excellent turndown ratio: 28:1

• robust aluminium construction and fully sealed against dust and watersplash

• flow linearisation (display version)

• field programmable

• easy to read and operate resetable six-digit display with ability

to show batch, reset total, non-reset total and rate of flow

• average battery life 2 years (2 x AAA alkaline)

• protective boot standard on LCD version –

optional coloured boots available: red, blue, yellow, black and green.

• 5 year warranty

• 10 year spare parts availability

Specifications

• port Size: 1” BSPT / NPT

• wetted Materials: Aluminium, Tungsten, Ceramic, Derlin.

• maximum Pressure: 2070 kPa (300 psi, 20.6 bar)

• flow: 8 to 200 L/min (2.1 to 52.8 US gal/min)

• accuracy: better than ± 3 % of reading

• fluid compatibility: Diesel, kerosene, light oils

• TM100 LCD

• digits: 12 mm size and maximum of 6 digit display

• decimals: Selectable 0 to 3

• totals: Batch / Reset Total / Non Reset Total / Rate

• temporary 50C to 550C

• TM100P Pulse

• operating Voltage: 12 to 30 V DC

• polarity protection: YES

• output: Open collector, maximum 1Watt peak (unfactored)

• connection: PCB terminal strip16 mm/1/2” NPT conduit

• temperature range 50 to 550C

TM100

TM100P

TM100

46

flow meters - water meters

turbine water meterTM100W (LCD) TM100WP (Pulse Output)

The TM100W turbine flowmeter has an excellent turndown ratioand is factory calibrated for precise measurement of low viscosityfluids. The low pressure drop and high pressure rating allows theturbine meter range to be used in gravity, pump and inlineapplications.

Features

• available in LCD (TM100W) and pulse (TM100W) versions

• high accuracy (better than ± 3 % of reading)

• excellent turndown ratio: 28:1

• nylon construction and fully sealed against dust and water splash

• flow linearisation (display version)

• field programmable

• easy to read and operate resetable six-digit display with ability

to show batch, reset total, non-reset total and rate of flow

• average battery life 2 years (2 x AAA alkaline)

• protective boot standard on LCD version –

optional coloured boots available: red, blue, yellow, black and green.

• 5 year warranty


Specifications

• port size: 1” BSPT / NPT, fully moulded

• wetted Materials: Nylon, Tungsten, Ceramic.

• maximum Pressure: 1 030 kPa (150 psi, 10.3 bar)

• flow: 10 to 200 L/min (2.6 to 52.8 US gal/min)

• accuracy: better than ± 3 % of reading

• fluid compatibility: Water, Low viscosity fluids that does notattack Nylon

• TM100W LCD

• digits: 12mm size and maximum of 6 digit display

• decimals: Selectable 0 to 3

• totals: Batch / Reset Total / Non Reset Total / Rate

• temperature range 50C to 550C

• TM100WP Pulse

• operating Voltage: 12 to 30 V DC

• polarity protection: YES

• output: Open collector, maximum 1Watt peak (unfactored)

• connection: PCB terminal strip16 mm/1/2” NPT conduit

• temperature range 50 to 550C

TM100WP

TM100W

47

flow meters - oil meters

oil metersIM50 (LCD)IM50P (Pulse Output)IM75 (LCD)IM75P (Pulse Output)

The IM50 & 75 have been designed specifically to dispenselubricating oils, diesel and kerosene. These high pressure, positivedisplacement-type meter is suitable for all in-line and end-of-lineapplications and features a rugged and robust register withintegrated electronics and large LC display.

Features

• Robust aluminium construction and fully sealed against dust and watersplash

• Easy to read and operate resetable six-digit display with ability to showbatch, reset total, non-reset total and rate of flow

• User selectable display units: Litres, Gallons, Pints, Quarts

• Available with LC display or pulse output (pulse output model with 1 m flylead available with either reed switch or hall effect sensor)

• Average battery life of two years (battery type: 2 x AAA alkaline)

• Protective boot standard on LCD version - optional coloured bootsavailable: red, blue, yellow, green, black

• 5 year warranty


Specifications IM50/IM50P IM75/IM75P

• wetted components: acetal (suitable with oils), aluminium, PEI resin, aluminium, nitrile (NBR), nitrile (NBR), mild steel mild steel

• accuracy: ±0.5% of reading ±0.5% of reading

• flow range: 1-30 L/min (0.26-8 US gal/min) 3-60 L/min (0.8-15.8 US gal/min)

• max. working pressure: 10 350 kPa (1 500 psi, 103.5 bar) 10 350 kPa (1 500 psi, 103.5 bar)

• inlet thread: 1/2” BSPT or NPT (F) 3/4” NPT (F)

• outlet thread: 1/2” BSPT or NPT (F) 3/4” NPT (F)

• operating temperature: 5ºC (14ºF) to +55ºC (131ºF) 5ºC to 800C for IM75P

• weight (approx): 430 g (0.95 lbs) 980 g (2.16 lbs)

IM50

IM50P IM75

retracta®auto rewindhose reelsRetracta® is the robust market leader in rewind hose reel systems.Retracta® is the answer to storage and safety problems, and thewide range of models allows the reel to be used in any industrywork environment.

48

hose reels - retracta

Features

• superior positive latching mechanism allows the reel to be mounted in any position

• weather resistant, high impact UV stabilised polypropylene

• safe storage system that keeps hoses off the floor

• versatile – average weight with hose is 12 kg

• low rewind tension allows for easy hose “pull out”

• full stainless steel mouth for improved hose and reel service life

• lockable wall or overhead mounting bracket BU100 is supplied with everyhose reel purchase and allows for hose reel rotation through 180°

• optional BB100 bench or floor mounting bracket is available separately

• an ability to have colour coded reels to suit any application or fit within anindividual corporate look (conditions apply)


• 5 year warranty

• guaranteed availability of spare parts for 10 years

Accessories

• BB100 Retracta Branch Bracket

49

MMooddeell DDeessccrriippttiioonn HHoossee IIDD HHoossee WWoorrkkiinngg HHoossee MMaatteerriiaall RReeeell HHoossee MMaaxx WWoorrkkiinngg RReeeell IInnlleett HHoossee OOuuttlleett WWeeiigghhtt MMaaxx.. LLeennggtthh PPrreessssuurree CCoolloouurr CCoolloouurr TTeemmpp.. ((BBSSPP//NNPPTT)) ((BBSSPP//NNPPTT)) VViissccoossiittyy

AB100 air breathing 10 mm 17 m 1 700 kPa (250 psi) reinforced PVC blue yellow 60° C 3/8” 1/4” 10 kg n/aAR100 compressed air 10 mm 20 m 1 700 kPa (250 psi) reinforced PVC red red 60° C 3/8” 1/4” 10 kg n/aAR200 compressed air 12.5 mm 15 m 1 700 kPa (250 psi) reinforced PVC red yellow 60° C 3/8” 3/8” 10 kg n/aAW100 compressed air/water 10 mm 20 m 1 700 kPa (250 psi) reinforced PVC blue blue 60° C 3/8” 1/4” 10 kg n/aAW150 compressed air/water 10 mm 15 m 1 700 kPa (250 psi) reinforced PVC blue blue 60° C 3/8” 1/4” 10 kg n/aAW200 compressed air/water 12.5 mm 15 m 1 700 kPa (250 psi) reinforced PVC blue blue 60° C 3/8” 3/8” 10 kg n/aCW100 cold wash 12.5 mm 15 m 1 000 kPa (150 psi) reinforced PVC blue white 60° C 3/8” hose nozzle 10 kg n/aDR100 garden water 12.5 mm 18 m 860 kPa (125 psi) reinforced PVC green green 60° C 3/8” hose nozzle 10 kg n/aFG100 food gas/CO2 6 mm 20 m 1 700 kPa (250 psi) NTP red clear 60° C 3/8” 1/4” 10 kg n/aFR300 foam 16 mm 10 m 1 000 kPa (150 psi) reinforced PVC white white 60° C 3/8” N/A 10 kg n/aGR100 grease 6 mm 10 m 34 500 kPa (5000 psi) reinforced rubber black black n/a 1/4” 1/4” 13 kg n/a

(SAE 100R2)HW100 hot water 12.5 mm 12 m 1 400 kPa (200 psi) reinforced rubber red red 90° C 3/8” 3/8” 10 kg n/aHWP100* high pressure hot water 10 mm 12 m 20 700 kPa (3000 psi) reinforced rubber red black 95° C 3/8” 3/8” 12 kg n/a

(SAE 100 R2AT) OA100** oxy/acetylene 5 mm 15 m 1 400 kPa (200 psi) reinforced rubber blue red/blue** n/a 5/8” UNF 5/8” UNF 13 kg n/a

(AS 1335) OLPG100** oxy/LPG gas 5 mm 15 m 1 400 kPa (200 psi) reinforced rubber black orange/blue** n/a 5/8” UNF 5/8” UNF 13 kg n/a

(AS 1335)OLP100 low pressure oil 12.5 mm 10 m 2 800 kPa (400 psi) reinforced rubber blue black 95° C 3/8” 1/2” 10 kg SAE 140

(SAE 100R6)OMP100 medium pressure oil 10 mm 10 m 6 900 kPa (1000 psi) reinforced rubber blue black n/a 3/8” 1/2” 13 kg SAE 140

(SAE 100R1)PW100 potable water 12.5 mm 15 m 1 000 kpa (150 psi) reinforced LDPE blue blue 60° C 3/8” 3/8” 10 kg n/aWP100 weedicide/pesticide 10 mm 16 m 1 700 kpa (250 psi) reinforced PVC red red 60° C 3/8” 1/4” 10 kg n/a

* HWP100 is not suitable for use with steam ** Specifications for OA100/OLPG100 are for Australian models only.

BB100

50

hose reels - metal

standard duty singlepedestal rangeMacnaught standard duty metal hose reels are ideal for thoseapplications where occasional use is normal. These reels areconstructed in powder coated steel with a single pedestal andintegral spring system. The stainless steel reel is bare, with a highpolish finish and is ideal for highly corrosive environments.

Features

• double supported steel drum shaft

• 4 bolt heavy duty steel mounting plate

• multi position ratchet for positive latching

• adjustable guide arm - can be wall, floor, ceiling,

pit or vehicle mounted

• multi directional nylon roller guides reduce hose drag and wear

• lubricated spring encapsulated in cassette for safety

• full flow swivel for maximum product delivery

• external swivel for easy servicing of swivel seals

• 5 year warranty


Model Description Hose ID Hose Length Working Pressure Hose Rewind Max Op Temp Reel Inlet Hose Outlet

MA1020 Air/Water 10 mm (3/8") 20 m 2 070 kPa (300 psi) Spring 80 ºC 3/8” BSP 3/8” BSP

MA1220 Air/Water 12 mm (1/2") 20 m 2 070 kPa (300 psi) Spring 80 ºC 1/2” BSP 1/2” BSP

MO1220 Oil 12 mm (1/2") 20 m 6 900 kPa (1000 psi) Spring 100 ºC 1/2” BSP 1/2” BSP

MG0615 Grease 6 mm (1/4") 15 m 34 450 kPa (5000 psi) Spring 100 ºC 1/4” BSP 1/4” BSP

SR0020 Stainless 12 mm (1/2") Swivel Bare reel 20 670 kPa (3000 psi) Spring N/A 1/2” BSP N/A

SR0020

MG0615

MA1220

51

hose reels - metal

heavy duty twinpedestal rangeMacnaught heavy duty hose reels are provided with twin pedestalsupports and are particularly suitable for truck mount applicationswhere stability and strength is required. All spring rewind modelshave an external spring cartridge allowing for easy maintenance andsafety as the cartridge can be replaced without removing the reelfrom its mounted position. Constructed of powder coated steel withheavy duty swivel and a mechanism that allows for the hose to stopat any point.

Features

• twin pedestal design for strength and stability - ideal for vehicleapplications

• 4 bolt heavy duty steel mounting plate

• locking mechanism allows for precise hose length adjustment

• adjustable guide arm - can be wall, floor, ceiling, pit or vehicle mounted

• multi directional nylon roller guides reduce hose drag and wear

• external spring cartridge (except powered rewind diesel reel) for easymaintenance & safety

• full flow heavy duty swivel for maximum product delivery

• powder coated finish for corrosion resistance

• 5 year warranty


Model Description Hose ID Hose Length Working Pressure Hose Rewind Max Op Temp Reel Inlet Hose Outlet

MDTP3820 Diesel 38 mm (1-1/2") 20 m 3 450 kPa (500 psi) 24 V DC 80 ºC 1-1/2” BSP 1-1/2” BSP

MDTP2520 Diesel 25 mm (1") 20 m 3 450 kPa (500 psi) Spring 80 ºC 1” BSP 1” BSP

MATP1220 Air/Water 12 mm (1/2") 20 m 2 070 kPa (300 psi) Spring 80 ºC 1/2” BSP 1/2” BSP

MATP1920 Air/Water 19 mm (3/4") 20 m 2 070 kPa (300 psi) Spring 80 ºC 3/4” BSP 3/4” BSP

MOTP1220 Oil 12 mm (1/2") 20 m 6 900 kPa (1000 psi) Spring 100 ºC 1/2” BSP 1/2” BSP

MOTP1920 Oil 19 mm (3/4") 20 m 6 900 kPa (1000 psi) Spring 100 ºC 3/4” BSP 3/4” BSP

MGTP0615 Grease 6 mm (1/4") 15 m 34 450 kPa (5000 psi) Spring 100 ºC 1/4” BSP 1/4” BSP

MGTP0915 Grease 9 mm (3/8") 15 m 34 450 kPa (5000 psi) Spring 100 ºC 3/8” BSP 3/8” BSP

WPTP1050 Weed/Pesticide 10 mm (3/8”) 50 m 3 450 kPa (500 psi) 24 V DC 80 ºC 3/8” BSP 3/8” BSP

MDTP3820

MDTP2520

52

oil and grease systems

portable oil systemOS100

The OS100 is a portable oil and grease system that caters for anyworkplace needs. All spare parts are available separately, and moreinformation on a particular component from any of the systems isdetailed separately in this catalogue.

Features

• suitable for 205 L (55 US gal) drums

• TR205 drum trolley (wheel brake included)

• OLP100 low pressure (400 psi) Retracta® hose reelhose: 12.5 mm (1⁄2") I.D. x 10 m (32 ft)

• R300S 3:1 ratio stub pump

• bare system no hose end gun

• systems available complete with any hose end gun (HG40, HG45, HG50,HG55, HG60)

• telescopic suction tube with maximum depth of 1200 mm (4 ft) completewith 2” bung adaptor

• suction hose – 1500 mm (5 ft)

• feeder hose – 1000 mm (3 ft)

• 5 year warranty


OS100

HG40 HG45 HG50

53


OS600

Features

• mounting plate

• OLP100 low pressure (400 psi) Retracta® hose reelhose: 12.5 mm (1⁄2”) I.D. x 10 m (32 ft)


• HG50 electronic oil dispensing gun

• oil lubricator

• air pressure regulator

• air pressure gauge

• quick connect air fittings

• suction hose: 2 m x 3⁄4”

• feeder hose: 1m x 1⁄2”

• 5 year warranty


OS800

Features

• mounting plate

• OMP100 medium pressure (1000 psi) Retracta® hose reelhose: 10 mm (3⁄8”) I.D. x 10m (32 ft)

• T512 5:1 ratio oil pump



• feeder hose: 1 m x 1⁄2”

• 5 year warranty


oil systemsThe OS500, OS600 & OS 800 systems are suitable for mountingonto IBC pods to create an easy to use and portable pumpingsystem.

OS500

Features

• mounting plate

• OLP100 low pressure (400 psi) Retracta® hose reelhose: 12.5 mm (1⁄2”) I.D. x 10 m (32 ft)




• feeder hose: 1 m x 1⁄2”

• 5 year warranty


R300

OLP100

HG50

OS500 Oil System

grease systemGS100

Compact, portable grease system designed to cater for anyworkplace needs. Spare parts and accessories are availableseparately.

Features

• suitable for 180 kg (400 lbs) drums

• TR205 Drum Trolley (wheel brake included)

• GR100 Grease Reel

• P8 (50:1) Ratio Pump complete withLid and Follower

• B2 Booster Gun complete with ZSB swivel

• 5 year warranty


54


grease systemP3-OS2

This portable grease system allows for pails up to 25 L (6 US g) tobe placed inside the supplied 4 wheeled container.

Features

• P3 Power-Lube® grease pump complete with lid and follower assembly

• B2 Booster Gun complete with ZSB swivel (not shown)

• 1⁄4” NPT x 4 m high-pressure hose assembly

• four wheeled container with handle assembly and wheel lock

• pressure gauge

• pressure regulator

• 5 year warranty


55

oil evacuation systemOS250

The OS250 evacuation unit is suitable for use with engine oil,automatic transmission fluid and anti freeze/anti boil or compatiblefluids. It can be used as a standard adjustable oil sump basin or asan air evacuation system.

Features

• adjustable recovery basin

• pre - fill chamber

• 90 L (24 US g) drum

• metal and flexible probes

• gravity or air suction option


ceevacThe CEEVAC is a portable, compact and environmentally friendlyevacuation unit. It has been designed to use the venturi principle toextract waste oil for safe disposal into any recycling container orbulk tank.

Features

• the unique design does not allow for any oil spillage

• suitable for engine oil, ATF, anti-freeze and compatible fluids

• does not require air to remove the waste oil from the viewing tank

• easy to empty into a recyclable container or bulk waste unit

• comes complete with air gauge, air silencer, 2 plastic probes (not shown),2 m suction hose, and the necessary quick connect fittings

• 5 year warranty


Specifications

• wetted components:aluminium, nitrile, plastic and brass

• oil removal:up to 2 L/min (depending on fluid viscosity)

• max. air pressure:600 kPa (100 psi, 6 bar)

• max. oil temp:80˚ C (176˚ F)

56


fluid management andcontrol systemRN64

The Macnaught RN64 Fluid Management and Control System is asingle or networked combination of 16 product controllers, witheach controller supporting up to 4 colour touch-screens. Eachcontroller can dispense up to 3 products simultaneously and besoftware configured to enable access to the products via any of thetouch terminals.

Software Features

• user friendly and easy to follow software installation process

• 3 level password access (manager, supervisor, operator) ensures appropriatesecurity in maintaining fluid inventories

• automatic saving of batches with a presettable idle-time function

• simple and accurate transfer of data to a PC from the controller

• able to retain all records of fluid transfers (i.e. batches) from inventories evenin the event of a power failure or a deliberate power-off by an operator

• software generates multiple reports that can be printed or exported to othersoftware applications and can also be linked to proprietary accountingpackages

• software incorporates a comprehensively secured inventory managementsystem that facilitates standard accounting procedures

Product Features

• designed to operate as either a stand alone controller or as part of a PCnetwork

• up to 16 products per controller

• full colour, alpha numeric touch screen entry

• hierarchy Pin access for system users

• batch log storage of up to 300 batches

• product identification and name entry

• individual K factor on each product input meter

• selectable unit of measurement

• simple plug ‘n’ play type field wiring and configuration

• can be used with any flowmeter compatible fluids

• visual alarms

• product tank inventory

• optional barcoding facility available for streamlining operations

• off-the-shelf system hardware ensures the latest technology andcomponents are available worldwide

• 12 month warranty

• easily configured to fit different facilities

• RS485 network with optional USB converter or Ethernet server allowingdistances of up to 1000 m

• touch screens powered over CAT 5 cable

• only standard power point required for each controller

• compatible with a wide selection of flowmeter and valve materials

57

Optional/special features:

• barcode/RFID

• large LCD remote display

• high waste level warning for each tank

• automatic ordering option available for each product

• remote interrogation and fault finding/troubleshooting

• remote operation for each dispense point if required

Typical Applications:

• automotive workshops

• truck/bus/bulk transport workshops

• industrial workshops

• mining

• marine

• food processing plants

• breweries

Typical fluids handled:

• motor oil

• automatic transmission fluid

• anti-freeze

• hydraulic oil

• fuel additives

• specialty fluids

• food oil

• chemicals

• viticulture/beverages

Example of Standard Automotive Workshop

Legend

1 Master PC/Printer A T and R Series 2 Shut-off Valve Oil Ratio Pumps3 Strainer B MO1220 Metal Hose Reel4 Positive Displacement C P8 Grease Lubricator

M-Series Oil Meter D OMP100 Retracta Oil Reel5 Solenoid Valve E HG20/HG100 Nozzle6 Touch Screen7 Remote LCD Display

• 3 variations of fluids are shown. Note: The RN64 has the capability ofhandling up to 16 products per controller.

• All control units are centralised back to network office PC for mastercontrol/inventory purposes.

58

Button headsGBH1419B Button head grease fitting 1/4” x 19 BSPF (10 pack)

GBH1828B Button head grease fitting 1/8” x 28 BSPF (10 pack)

Grease nipples

GN061M90 Grease nipple M6 x 1 90° angle (10 pack)

GN061MST Grease nipple M6 x 1 straight (10 pack)


GN081MST Grease nipple M8x 1 straight (10 pack)


GN101MST Grease nipple M10 x 1 straight (10 pack)

GN1428S45 Grease nipple 1/4” 28 SAE LT 45° angle (10 pack)

GN1428S90 Grease nipple 1/4” 28 SAE LT 90° angle (10 pack)

GN1428SST Grease nipple 1/4” 28 SAE LT straight (10 pack)

GN1827N45 Grease nipple 1/4” 28 NPT 45° angle (10 pack)

GN1827N90 Grease nipple 1/4” 28 NPT 90° angle (10 pack)

GN1827NST Grease nipple 1/4” 28 NPT straight (10 pack)

Easy out tool

GNEL Easy out tool - large

GNES Easy out tool - small

Grease nipple assortment pack GNP80M Grease nipple assortment pack 80 piece metric

GNP80S Grease nipple assortment pack 80 piece SAE/NPT

Refillable bearing lubricators

MCGL 100(100mL)MCGL 220(220mL)

The refillable automatic lubricators are high quality, mechanical,chemical and thermal resistant. Designed to provide constantlubrication to bearings, bushings, joints, articulated joints or whereverconstant greasing is required. The lubricators are supplied with asetting dial which allows you to set the dispensing rate of the grease.

Features

• manufactured from transparent Lexon®

• setting dial (1,3,6 and 12 months)

• supplied with 2 springs, yellow (medium tension) black (strong tension)

accessories - grease fittings

GNP80s GNP80M

GNES

59

accessories

greasing kits

ACK2 aviation kit

Accessories typically required when lubricating aircraft. Itemsincluded are a KDN, KDS, KDE8, KDF21, KY, KZDXL, KZHY, KZLNJ, KZLNS,KZLNR, KZLN45, KZSNR and J65, with photos and descriptionsof each included in this section.

CK1 industrial greasing accessory kit

An industrial workplace kit for users of air operated grease pumps.Items include a KDR, KGR, KSR, KZD, KDE8, PDF13 and PDF21,with photos and descriptions of each included in this section.

CK2 industrial greasing accessory kit

An industrial workplace kit for users of hand operated greasepumps. Items include a KDR, KGR, KSR, KZD, KDE8, KDF13 andKDF21, with photos and descriptions of each included in thissection.

FK1 farm greasing accessory kit

An ideal kit for farmers who use air operated grease pumps. Itincludes a KDR, KGR, KSR, KZD, PDF13 and PDF21. Photos ofeach of these are included in this section.

FK2 farm greasing accessory kit

This kit is typically required by farmers who use hand operatedgrease guns. Items included are a KDF13, KDF21, KDR, KFR andKZD, with photos and descriptions of each included in this section.

60

accessories

greasing couplers

KY coupler

Standard supergrip coupler suppliedwith all Macnaught grease guns.Designed to fit most grease nipples andgrease guns. Can be purchased separately or in packets of 8 (KY-8).

KDN right angleneedlepoint coupler

Ideal where access to the grease nipple isminimal.

KDR right angle coupler

For use in spaces when the area above the nipple islimited.

KDS right angle coupler

A slightly shorter version of the KDR.Along with the KDN and KDR, it can be usedwith a flexible extension.

KSR standard buttonhead coupler

For use on plant and machinery fitted with 5⁄8”buttonhead nipples. Length 72 mm(23⁄4”).

KGR giant buttonhead coupler

For use on plant and machinery fitted with7⁄8” buttonhead nipples. Length 85mm (33⁄8”).

KRV pressure release valve

Helps to prevent nipples from breakingoff and couplers from splitting.Recommended for use with the K6 Minilube, P3Powerlube, and P6 and P8 Maxilubes.

KZD needlenose coupler

Used when nipples are recessed and standardcouplers would meet with interference fromsurrounding components (universaljoints, etc). Length 93 mm (33⁄4”).

KZDXL straight needlepointcoupler

Ideal for greasing the bearings on fourwheel drive vehicles. Length 120 mm(43⁄4”).

KZE concave nipple coupler

Used when vehicles are fitted with specialnipples or, in some cases, whennormal nipples are damaged.Length 60 mm (21⁄4”).

61

accessories

greasing couplers

KZX concave nipple coupler

A similar coupler to the KZE but fitted with a rigidextension. Length 200 mm (8”).

KN grease injector needle

Small needle used to inject sealed bearings and smalllubrication points with grease when no greasenipples are present. Length 64 mm (21⁄2”).

KZHY hyperdermic needlepointcoupler

Ideal for use on bearings fitted with rubber dustcovers. Length 130 mm (51⁄8in).

KZLN 45° needlepoint coupler

A choice of four 30cm straight needlepoint couplers.The first 3 are ideal for use with aircrafts, while theKZLNS can be used with four wheel drivevehicles.

KZLNJ needlepoint coupler

A choice of four 30 cm straight needlepoint couplers.The first 3 are ideal for use with aircrafts, while theKZLNS can be used with four wheel drivevehicles.

KZLNR 90° needlepoint coupler

A choice of four 30 cm straight needlepoint couplers. Thefirst 3 are ideal for use with aircrafts, while the KZLNScan be used with four wheel drive vehicles.

KZLNS needlepoint coupler

A choice of four 30 cm (12”) straight needlepoint couplers.The first 3 are ideal for use with aircrafts, while theKZLNS can be used with four wheel drive vehicles.

KZSNR 90° needlepoint coupler

An 110mm (41⁄4”) needlepoint coupler with a 90° bendat the end.

ZSB swivel

A 360° swivel supplied either separately orwith the B2 Booster Gun.

62

accessories

grease extensionhoses

KDE8 extension

A 220 mm (55⁄8”) push on rigid extension coupler witha nipple to fit onto the KY coupler. For use withgrease guns.

KFR rigid/flexible extension

A 330 mm (13”) extension with a sliding sleeve thatallows for either flexible or rigid operation. Thethread is 1⁄8” BSP (M) and fitted with a KYcoupler.

air equipment

PF9 flexible extension

A 230 mm (9”) high pressure flexible extensionsuitable for use with air operated greasingequipment. Its threads are 1⁄8” BSP (M).

PF17 flexible extension

This 430 mm (17”) high pressure flexibleextension is also suitable for air operatedgreasing equipment and has 1⁄8” BSP (M)threads.

PDF13 push on extension

A 330 mm (13”) push on flexible extension for airoperated equipment. Ideal for working in confinedspaces.

PDF21 push on extension

A longer (530 mm or 21”) version of the PDF13.

PF6 extension hose

A 4 m x 6 mm (1⁄4”) ID high pressureextension hose for air operated greasingequipment. It is the standard supplywith the P3 Power-Lube® and the P6Maxi-Lube®, and has 1⁄4” NPT (M) threads.

PF8 feeder hose

A 2.5 m x 6 mm (1⁄4”) ID high pressurefeeder hose with 1⁄4” NPT (M) threads isalso suitable for air operated greasingequipment, and is supplied when a completeP8 unit (P8-11) is ordered.

manual equipment

KF9 flexible extension

A 230 mm (9”) high pressure flexible extension suitablefor Macnaught’s manual grease gun range. It issupplied with the K29 Flexigun and K53 PowerPistol, and has 1⁄8” BSP threads. Can bepurchased separately or in packets of 10(KF9-10)

KF17 flexible extension

This 430 mm (17”) high pressure flexible extension isalso suitable for the manual grease gun range andhas 1⁄8” BSP threads.

63

accessories

manual equipment

KDF13 flexible extension

A 330 mm (13”) push on flexible extension with nipple to fitthe KY coupler. It is suitable for the manual grease gunrange and is ideal for working in confined spaces.

KDF21 flexible extension

A longer 530 mm (21in) version of the KDF13.

air line accessories

TA-3K lubricator kit

An airline oil lubrication kit for use with the R-Series air powered oil pumps. The oil keeps theair motor free from corrosion and reduces seal wear.

TA-4K pressure regulator kit

This factory preset air pressure regulator can beused with the P3 Power-Lube®, P6 Maxi-Lube®and P8 Maxi-Lube® grease pumps. Keeps airpressure at the ideal level for longer pump life.Preset to 862 kPa (125 psi, 8.6 bar).

TA-5K Quick Release Coupler Kit

A snap on connector for easy connection of airpowered equipment to the airline.

TA16 air valve

A simple but very reliable on/off air valve for usewith air operated grease and oil pumps.

oil control gunaccessories

HGNZL automatic nozzle

Fully automatic non-drip nozzle.

HGFM flexible metal extension

300 mm (12”) flexible ‘set in place’ metal extension.

HGFNZ flexible extension

250 mm (10”) flexible extension complete with fullyautomatic non-drip nozzle.

HGREX rigid extension

150 mm (6”) rigid extension.

HGFEX flexible extension

250 mm (10”) flexible extension.

multi coloured shrouds HG range

Manufactured from oil and shock resistantpolyester, these colour coded shrouds provide extraprotection to the oil control gun range.

IM range Manufactured from oil and shock resistant polyester, these colour coded shrouds provide extra protectionto the oil control gun range.z

64

accessories

suction tubes

TB17S suction tube

A suction tube suitable for use with the R100S (stub)Ratio Oil Pump in drums and tanks to 1200 mmdeep. Complete with 1” BSP fixing adaptor.

TB23S suction tube

This is the NPT version of the TB17S.

TB25S suction tube

A suction tube suitable for use with the pump modelsT112, T312, T512, R500S (stub) Ratio Oil Pumps indrums and tanks to 1200 mm deep. 1” UNF (M)thread.

TB26S suction tube

This suction tube has the same features as the TB25S,but has a foot valve included for when improvedpriming is required.

TD42S suction tube

A suction tube suitable for use with the R300S andR1000S (stub) Ratio Oil Pumps in drums and tanksto 1200 mm deep. Complete with 3⁄4” BSPfixing adaptor.

TB24S suction tube

This is the NPT version of the TD42S.

oil feeder hoses

TB-20K

A 3 m (10 ft) high-pressure feeder hosesuitable for use with the T512 Oilmaster®pump. The hose has an I.D. of 12.5 mm (1⁄2”)and a working pressure of 6 900 kPa (1 000psi, 69 bar).

TD-25K

This 3 m (10 ft) low pressure feeder hose is idealfor use with the R100 and R300 ratio oil pumps,and the T312 Oilmaster® pump. The hose has anI.D. of 12.5 mm (1⁄2”) and a working pressure of 2 800 kPa (400 psi, 28 bar).

fuel filters

GB fuel filter

Supplied with fittings to suit the GP Rapid-Flo pump.Inlet: 1” NPTOutlet: 1” hosetail

HA fuel filter

Supplied with fittings to suit the HP Litre-Stroke pump.Inlet: 1” NPTOutlet: 1” hosetail

VA fuel filter

Supplied with fittings to suit the PVR, PVRH and RB pumps.Inlet: 1” NPTOutlet : 3⁄4” hosetail

65

accessories

HA1S fuel filter

Inlet thread: 1” NPTOutlet thread: 1” NPT

HA7S filter element

The 10 micron filter element used in the GB, HAand VA fuel filters. Supplied with seals.

fuel strainers

Stainless steel mesh elements used inthe GB, HA and VA fuel filters.HASS40 (40 mesh Stainless Steel)HASS80 (80 mesh Stainless Steel)

DF

Fittings for connecting DM 100/150meters to GE12/24 fuel pumps.

DG

Fittings for connecting DM 100/150meters to GP pumps.

DH

Fittings for connecting DM 100/150 meters toHP pumps.

DV

Fittings for connecting DM 100/150meters to RB & PVR pumps..

fuel nozzels

CF strainer

This 120 mm (43⁄4”) fine mesh strainer can be used in conjunctionwith Macnaught’s C-Series range of pumps (C7, C11 and C13) forpumping transmission fluids or hydraulic oils. The CF is included inthe pump when the CF7 Oil Pump is ordered.

HNU nozzle

Suitable for unleaded petrol, this 215 mm (81⁄2”) fuel nozzle isdesigned to fit either the GP Rapid-Flo or the HP Litre-Strokepumps.

MCHP055manual nozzle

21 mm diameter manual fuel nozzle.Flow rate up to 60 L/min (16 USgal/min).

MCHP085auto nozzle

21 mm diameter auto shut off fuel nozzle. Flowrate up to 70 L/min (18 US gal/min).

MCHP070 auto nozzle

30 mm diameter hi flow autoshut off fuel nozzle. Flow rate up to 120 L/min(31 US gal/min).

66

accessories

trolleys

TR5 trolley

Designed to suit 15 L (4 US g) to 25 L (6 US g) oil, and 12.5 kg (28 lbs) to 22 kg (48 lbs) grease containers.

TR6 trolley

Designed to suit 50 L (13 US g) to 60 L (16 US g) oil, and 50 kg (110 lbs) to 55 kg (120 lbs) grease containers.

TR60 trolley

Designed to suit 50 L (13 US g) to 60 L (16 US g) oil drums.

TR205 drum trolley

Designed to suit drums up to 205 L (55 US g) or 180 kg (400 lbs), this drum trolley is ideal for use in portable oil or grease systems.

205HDLhydraulicdrum trolley

Heavy duty hydraulic liftdrum trolley designed tosuit drums up to 205 L (55US g) or 180 kg (400 lbs).

MCTR20 hand dolly

Designed to suit drums up to 20 L / 18 kg.

MCTR30 hand dolly

Designed to suit drums up to 60 L / 55 kg.

generalaccessories

KT5 (2.5 kg) GreaseContainer KT6 (5 kg) GreaseContainer An optional grease container ideal for use in conjunctionwith the K6 Mini-Lube. Also available is the K6-24, a complete Mini-Lube systemwhich includes the K6 and KT5 container.

BB100 retracta® bracket

An optional bracket for mounting Retracta® hose reelson a bench, floor or high wall.

BU100 retracta® bracket

Standard bracket supplied with all Retracta® hosereels for either wall or overhead mounting.

67

accessories

GBP1 grease bearingpacker

Suitable for bearings with a minimum ID of 12 mm(1⁄2”), maximum OD of 125 mm (5”), and a height upto 50 mm (2”)

TD20 wall bracket

A 2” wall mounting bracket for remoteinstallations and suitable for use with all ofMacnaught's air operated oil pumps

OBTP pump mounted oilbar tap

Suitable to use with R and T Series ratio oilpumps up tp 5 500 kPa (800 psi, 55 bar)working pressure. In built strainer.

OBTW wall mounted oilbar tap

Suitable to use with R and T Series ratio oilpumps up tp 5 500 kPa (800 psi, 55 bar)working pressure. In built strainer.

GGH grease gun holder

Designed to suit 15 L (4 US g) to 25 L (6US g) oil, and 12.5 kg (28 lbs) to 22 kg (48lbs) grease containers.

DWA aluminium drum wrench

Designed to suit 15 L (4US g) to 25 L (6 US g) oil,and 12.5 kg (28 lbs) to 22kg (48 lbs) greasecontainers.

68

OIL CONTROL GUNS

MODEL EXTENSION TYPE METER FLOW RATE SAE30 OPERATING PRESSURE GUN WEIGHTHG20F Flexible No 25 L/min 7 000 kPa (1 000 psi) 0.8 kgHG20R Rigid No 25 L/min 7 000 kPa (1 000 psi) 0.8 kgHG100 Flexible No 57 L/min 10 350 kPa (1 500psi) 2.2 kgHG40 (Mechanical Meter) Rigid Yes 30 L/min 10 350 kPa (1 500psi) 1.1 kgHG50 (Electronic Meter) Rigid Yes 30 L/min 10 350 kPa (1 500psi) 1.1 kgHG55 (Electronic Reset) Rigid Yes 30 L/min 10 350 kPa (1 500psi) 1.1 kgHG60 (Electronic Preset) Rigid Yes 30 L/min 10 350 kPa (1 500psi) 1.1 kg

AIR OPERATED OIL PUMPS

MODEL CONTAINER SIZE SUCTION TUBE** SUITABLE TO USE WITH FLOW RATE SUITABLE FOR (Free flow at the USE WITH pump with ATF) HOSE REEL

Bulk tank* 205 L 60 L FIXED TELESCOPIC SAE 30 SAE 60 SAE 90 SAE 140R100T ✓ ✓ ✓ Yes No ✓ ✓ ✓ ✓ 60 L/min xR100S ✓ * ✓ * ✓ No Yes ✓ ✓ ✓ ✓ 60 L/min xR300T ✓ ✓ ✓ Yes No ✓ ✓ ✓ ✓ 23 L/min ✓

R300S ✓ * ✓ * ✓ No Yes ✓ ✓ ✓ ✓ 23 L/min ✓

R500T ✓ ✓ ✓ Yes No ✓ ✓ ✓ ✓ 28 L/min ✓

R500S ✓ * ✓ * ✓ No Yes ✓ ✓ ✓ ✓ 28 L/min ✓

R1000T ✓ ✓ ✓ Yes No ✓ ✓ ✓ ✓ 15 L/min ✓

R1000S ✓ * ✓ * ✓ No Yes ✓ ✓ ✓ ✓ 15 L/min ✓

T112 Oilmaster® ✓ * ✓ * ✓ * No Yes ✓ ✓ ✓ ✓ 27 L/min xT312 Oilmaster® ✓ * ✓ * ✓ * No Yes ✓ ✓ ✓ ✓ 15 L/min ✓

T512 Oilmaster® ✓ * ✓ * ✓ * No Yes ✓ ✓ ✓ ✓ 15 L/min ✓

* Refer to our catalogue or Macnaught reseller for correct suction tube selection** To suit 60 L, 205 L or TanksNote: It's always advisable to ensure the pressure rating of all plumbing, connections and hoses meet the standard required for the selected pump(s) and compressor combinations.

HAND OPERATED OIL/FUEL PUMPS

MODEL VOLUME CONTAINER SIZE FUEL SAE OIL OTHER NON- DELIVERYDELIVERED CORROSIVE HOSE/

LIQUIDS NOZZLE15-25 L 60 L 205 L tank PETROL DIESEL KEROSENE SAE 30 SAE 60 SAE 90 SAE 140

1.4 m deep (LP)C4 Multi-Purpose# 100 mL/stroke ✓ x x x ✓ ✓ ✓ x x x ✓ xC4H Multi-Purpose# 100 mL/stroke ✓ x x x ✓ ✓ ✓ x x x ✓ ✓

C7 Oil Pump*# 100 mL/stroke ✓ x x x ✓ ✓ ✓ ✓ ✓ ✓ x ✓

C11 Gear Oil Pump* 75 mL/stroke x x ✓ x x x ✓ ✓ ✓ ✓ x ✓

C13 Gear Oil Pump* 75 mL/stroke x ✓ x x x x ✓ ✓ ✓ ✓ x ✓

A2 Multi Purpose 250 mL/stroke x ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ x ✓ xA2H Pump 250 mL/stroke x ✓ ✓ x ✓ ✓ ✓ ✓ ✓ x ✓ ✓

GP Rapid-Flo** Up to 100 L/min x ✓ ✓ ✓ ✓ ✓ ✓ x x x x ✓

HP Litre Stroke** up to 40 L/min x ✓ ✓ ✓ ✓ ✓ ✓ x x x x ✓

Rotary Booster** up to 75 L/min x ✓ ✓ ✓ ✓ ✓ ✓ x x x x ✓

PVRH Rotary Pump** Up to 20 L/min x ✓ ✓ x ✓ ✓ ✓ ✓ ✓ x x ✓

PVR Pump** Up to 20 L/min x ✓ ✓ x ✓ ✓ ✓ ✓ ✓ x x xS20H/HA** 340 mL/stroke ✓ x x x ✓ ✓ ✓ ✓ ✓ ✓ x ✓

S60H/HA** 500 mL/stroke x ✓ x x ✓ ✓ ✓ ✓ ✓ ✓ x xC16 Suction Pump 500 mL/stroke x x x x x x ✓ ✓ ✓ x x ✓

* CF Strainer option available for auto transmission fluids** Filter option available# Available in zinc for underground coal mining use.

Modify suction tube to suit.

69

AIR OPERATED GREASE GUNS AND PUMPS

MODEL TYPE FILLING METHOD 20 kg 55 kg 180 kg 50:1 AIR PRESSURE PRESSURE CREATED* PUMP OUTPUT / VOLUMECartridge Bulk J2 Pump Air Motor OPERATING RANGE (Up to)

K53/K54 Single shot, ✓ ✓ ✓ x x x ✓ 400 - 1 030 kPa 34 500 kPa 0.68 g per shotPower Pistol single hand operation (60 - 150 psi) (5 000 psi)P3 Powerlube 20kg librication system, x x x ✓ x x ✓ 400 - 1 030 kPa 34 500 kPa (5 000 psi) Typically 380 g/min

portable with TR5 trolly (60 - 150 psi) line pressure at 690 kPa (100 psi)69 000 kPa (10 000 psi) using 4m x 6mmboost pressure hose with NLGI No.2.

P6 Maxilube 55 kg lubrication system, x x x x ✓ x ✓ 400 - 1 030 kPa 34 500 kPa (5 000 psi) Typically 380 g/minportable with TR6 Trolley (60 - 150 psi) line pressure at 690 kPa (100 psi)

69 000 kPa (10 000 psi) using 4m x 6mmboost pressure hose with NLGI No.2.

P8 Maxilube 180 kg lubrication system, x x x x x ✓ ✓ 400 - 1 030 kPa 34 500 kPa (5 000 psi) Typically 380 g/minavailable as a complete unit (60 - 150 psi) line pressure at 690 kPa (100 psi)or in component form 69 000 kPa (10 000 psi) using 4m x 6mm

boost pressure hose with NLGI No.2.

* With compressor at 690 kPa (100 psi)Macnaught's range of air operated pumps easily connect to any small compressor from 0.08 m3/min (3cfm) and are compatible to NLGI No. 2 Greases.A wide range of accessories are available - please refer to full Macnaught catalogue for all the details.

The P3, P6 and P8 have no exposed aluminium and are suitable for underground coal mining.

HAND OPERATED GREASE GUNS AND PUMPS

TYPE FILLING METHOD 2.5 kg 20 kg PRESSURE CREATED VOLUME PER SHOT PUMPS NLGI (UP TO) #2 GREASES

Cartridge Bulk J2 PumpK45/K45 Levergun Lever action ✓ ✓ ✓ _ _ 69 000 kPa (10 000 psi) 1.5 gms ✓

K29/K32 Flexigun* One hand operation ✓ ✓ ✓ _ _ 52 000 kPa (7 500 psi) 0.68 gms ✓

K6/KR Minilube Manual/spring loaded lubrication x ✓ ✓ KT5 ✓ x 69 000 kPa (10 000 psi) High volume - 1.25 g ✓

✓ KT6 on high pressureContainer High pressure - 0.45 g

K3/KR Superlube Manual/spring loaded lubrication x x x x ✓ 69 000 kPa (10 000 psi) High volume - 1.25 g ✓

on high pressure High pressure - 0.45 gJ2 Grease Pump Fast and Easy loading of N/A x ✓ N/A 54 g/stroke ✓

KT5, K29 and K45

* model available in zinc for underground coal mining application

70

AIR OPERATED GREASE GUNS AND PUMPS

MODEL TYPE FILLING METHOD 20 kg 55 kg 180 kg 50:1 AIR PRESSURE PRESSURE CREATED* PUMP OUTPUT / VOLUMECartridge Bulk J2 Pump Air Motor OPERATING RANGE (Up to)

K53/K54 Single shot, ✓ ✓ ✓ x x x ✓ 400 - 1 030 kPa 34 500 kPa 0.68 g per shotPower Pistol single hand operation (60 - 150 psi) (5 000 psi)P3 Powerlube 20kg librication system, x x x ✓ x x ✓ 400 - 1 030 kPa 34 500 kPa (5 000 psi) Typically 380 g/min

portable with TR5 trolly (60 - 150 psi) line pressure at 690 kPa (100 psi)69 000 kPa (10 000 psi) using 4m x 6mmboost pressure hose with NLGI No.2.

P6 Maxilube 55 kg lubrication system, x x x x ✓ x ✓ 400 - 1 030 kPa 34 500 kPa (5 000 psi) Typically 380 g/minportable with TR6 Trolley (60 - 150 psi) line pressure at 690 kPa (100 psi)

69 000 kPa (10 000 psi) using 4m x 6mmboost pressure hose with NLGI No.2.

P8 Maxilube 180 kg lubrication system, x x x x x ✓ ✓ 400 - 1 030 kPa 34 500 kPa (5 000 psi) Typically 380 g/minavailable as a complete unit (60 - 150 psi) line pressure at 690 kPa (100 psi)or in component form 69 000 kPa (10 000 psi) using 4m x 6mm

boost pressure hose with NLGI No.2.

* With compressor at 690 kPa (100 psi)Macnaught's range of air operated pumps easily connect to any small compressor from 0.08 m3/min (3cfm) and are compatible to NLGI No. 2 Greases.A wide range of accessories are available - please refer to full Macnaught catalogue for all the details.

The P3, P6 and P8 have no exposed aluminium and are suitable for underground coal mining.

HAND OPERATED GREASE GUNS AND PUMPS

TYPE FILLING METHOD 2.5 kg 20 kg PRESSURE CREATED VOLUME PER SHOT PUMPS NLGI (UP TO) #2 GREASES

Cartridge Bulk J2 PumpK45/K45 Levergun Lever action ✓ ✓ ✓ _ _ 69 000 kPa (10 000 psi) 1.5 gms ✓

K29/K32 Flexigun* One hand operation ✓ ✓ ✓ _ _ 52 000 kPa (7 500 psi) 0.68 gms ✓

K6/KR Minilube Manual/spring loaded lubrication x ✓ ✓ KT5 ✓ x 69 000 kPa (10 000 psi) High volume - 1.25 g ✓

✓ KT6 on high pressureContainer High pressure - 0.45 g

K3/KR Superlube Manual/spring loaded lubrication x x x x ✓ 69 000 kPa (10 000 psi) High volume - 1.25 g ✓

on high pressure High pressure - 0.45 gJ2 Grease Pump Fast and Easy loading of N/A x ✓ N/A 54 g/stroke ✓

KT5, K29 and K45

* model available in zinc for underground coal mining application

b. at the purchaser’s owncost, returning thedefective Product to thenearest authorizedMacnaught service centre.

6. Subject to compliance by thepurchaser with clause 5,Macnaught shall, at its option,repair or replace any product orcomponent found defective byits inspection by reason offaulty materials or workmanshipof Macnaught.

7. This warranty does not coverfailure of products, parts orcomponents which, in the solejudgment of Macnaught, arisesother than from faulty materialsor workmanship of Macnaught,including misuse, abrasion,corrosion, negligence, accident,substitution of non-Macnaughtparts, unauthorizedmodification, improper use,storage or handling, faultyinstallation or tampering by thepurchaser or any third party.

8. If Macnaught inspectiondiscloses no defect in materialor workmanship, repair orreplacement and return (atMacnaught’s sole option) willbe made at customary charges,which will be advised to thepurchaser.

9. Macnaught’s liability and thepurchaser’s rights under thisWarranty shall be limited torepair or replacement ofdefective products orcomponents and in particular,shall not extend to any direct,special, indirect orconsequential damage orlosses of any nature.

10. The foregoing warrantysupersedes, voids and is in lieuof all or any other warranties.

macnaught warranty

1. Macnaught Pty Ltd(“Macnaught”) warrants that allproducts manufactured byMacnaught and/or supplied byMacnaught under the“Macnaught” brand, excludingM-Series positive displacementmeters (“Meters”) andcomponents subject to wear,will be free from any defectscaused by faulty materials orworkmanship for a period of 5years from the date of purchaseof the product.

2. For Meters, the warranty periodis 12 months from the date ofpurchase of that product.

3. For components contained inall products (including Meters)which are usually subject towear from normal operation ofthe products (such as o-rings,seals, springs and hoses), thewarranty period is 12 monthsfrom the date of purchase ofthe relevant product.

4. For products and componentswhich are not manufactured byMacnaught and are supplied byMacnaught under a brand nameother than “Macnaught”, thewarranty period is the longer of12 months from date ofpurchase of the relevantproduct and the period of themanufacturer’s warranty.

5. The warranties contained inclauses 1, 2, 3 and 4 above areconditional on the Purchaser,during the relevant warrantyperiod:a. delivering to Macnaught a

detailed notice setting outfull details of any defect inany Product and details ofthe date and place ofpurchase (together withcopies of purchasereceipts and/or othersupporting documents);and

This warranty does not form part of, nor does it constitute, a contract betweenMacnaught and the end-user or purchaser. It is additional to any warranty givenby the seller of the products. This warranty does not exclude, limit, restrict ormodify the non-excludable rights or remedies conferred upon the end-user orpurchaser, or the non-excludable duties or liabilities imposed on the seller orMacnaught, by Part V, Divisions 2 and 2A of the Trade Practices Act 1974(Commonwealth) or other legislative provisions. Macnaught otherwiseexcludes, to the extent permitted by law, any rights conferred on the

macnaught.com.au

Available from:

Head Office - SydneyMacnaught Pty Ltd41-49 Henderson St, TurrellaSydney NSW 2205 AustraliaPh: +61-2-9567 0401 Fax: +61-2-9597 7773 email: [email protected]: www.macnaught.com.au

Quality Endorsement applicable to Macnaught Head Office Sydney Only

Macnaught AsiaMacnaught Asia Pte Ltd20 Kallang Av. #03-00 Pico Creative Centre, Singapore, 339411Ph: +65 6396 5855 Fax: +65 6396 5871Sales Representative Office (Jakarta)Ph: +62-21-527 9015 Fax: +62-21-527 9017email: [email protected]: www.macnaught.com.au

Macnaught USAMacnaught USA, Inc.614 South Ware BoulevardDock 14A (for deliveries)Tampa, FL 33619Ph: 813-628-5506 Fax: 509-694-8495email: [email protected]: www.macnaughtusa.com

Macnaught EuropeMacnaught Europe LtdD1 Lincoln ParkBorough RoadBuckingham Road Ind EstBrackley NN13 7BEUnited KingdomPh: +44 1280 705001Fax: +44 1280 705006email: [email protected]: www.macnaughteurope.com

macnaught lubrication & greasing equipment pdf reiniger/katalog_mcnaught.pdf · 6 greasing...

Documents