macrotron systems nc nand flash based / … state drive nand flash based / pata (ide) macrotron...

Solid State DriveNAND FLASH BASED / PATA (IDE)

MACROTRON SYSTEMS, INC

1

Revision Description Issue Date Remarks

1.0 Initial Release May 06, 2010

www.macrotronsystems.comDatasheet Rev 1.0

Macrotron Systems, Inc. Flash Media Products

Part Number Family:

2.5” PATA (IDE) SSD (High Performance Series)PA25SMXXXXXMXXMX

&

1.8” PATA (IDE) SSD (High Performance Series)PA18SMXXXXXMXXMX

HIGH PERFORMANCE SERIES



2


HIGH PERFORMANCE SERIES

THIS DOCUMENT IS PROVIDED “AS IS” WITH NO WARRANTIES WHATSOEVER, INCLUDING ANY WARRANTY OF MERCHANTABILITY, NON-INFRINGEMENT, FITNESS FOR ANY PARTICULAR PURPOSE, OR ANY WARRANTY OTHERWISE ARISING OUT OF ANY PROPOSAL, SPECIFICATION OR SAMPLE.

Macrotron Systems, Inc. disclaims all liability, including liability for infringement of any proprietary rights, relating to use of information in this document. No license, expressed or implied, by estoppels or otherwise, to any intellectual property rights is granted herein.

*Third-party brands, names, and trademarks are the property of their respective owners.



3


HIGH PERFORMANCE SERIESOverviewThe Macrotron High Performance Series PATA (IDE) SSDs are thestorage device based on NAND flash memory technology and the most advanced SM2235 Parallel ATA 4-channel NAND Flash controller.

The Macrotron High Performance Series PATA (IDE) SSDs are available in 2.5” and 1.8” form factors, and comply with ATA standard interface.They are suitable for data storage media and code storage device forembedded system and boot disk.

Macrotron’s PATA (IDE) SSDs deliver the best in class performance andreliability in the market place today.

SM2235 Controller Features

Host Interface Features - Supports Ultra DMA Mode 0~6 - Compliant with ATA v.7 specifications - Supports SMART command set and ATA security command set

NAND Flash Interface Features - 2 or 4 channels Flash interface - 8 chip-enabled pins per channel - Supports SLC/MLC of various Flash vendors - Supports 2K and 4K byte page SLC/MLC - Hardware BCH ECC detects/corrects up to 15-bit errors in 528 data - Supports global wear leveling - Programmable cycle time setting for different NAND Flash - In-System Programming (ISP) provides flexibility for new Flash and host compatibility support



4


HIGH PERFORMANCE SERIESProduct Specifications

SSD ModelCapacity

Form FactorsController

Flash TechnologyConnector Types

Data Transfer ModePerformance Specifications

Sustained Read SpeedSustained Write Speed

Latency SpecificationsReadWrite

Latency Power On to ReadySupply Voltage

Power ConsumptionActiveIdle

Industrial Temperature Operating

Non-OperatingWide Temperature

OperatingNon-Operating

Shock (Non-Operating)Vibration (Operating)

Reliability MTBFECC

Data RetentionDimension

2.5” PATA (IDE) SSD4GB ~ 128GB (SLC & MLC)

2.5” SSDSM2235 4-channel Flash Controller

Supports SLC and MLC NAND Flash44 pin IDE interface

Ultra DMA Mode 0~6

87 MB/s (SLC) & 87 MB/s (MLC)82 MB/s (SLC) & 45 MB/s (MLC)

85 us (TYP)115 us (TYP)

1 sVcc = 5.0V +/- 5%

2.0 W0.5 W

0° C to 70° C -20° C to 80° C

-40° C to 85° C-50° C to 95° C1,500G (max)

20G peak, 10~2KHz with 3 axis

1,000,000 hoursSupports BCH ECC up to 15-bit in 512 bytes

10 years100 mm x 70 mm x 9.5 mm

1.8” PATA (IDE) SSD64GB (SLC) & 128GB (MLC)

1.8” SSDSM2235 4-channel Flash Controller

Supports SLC and MLC NAND FLash44 pin IDE interface (ATA7)

Ultra DMA Mode 0~6

87 MB/s (SLC) & 87 MB/s (MLC)82 MB/s (SLC) & 45 MB/s (MLC)

85 us (TYP)115 us (TYP)

1 sVcc = 5.0V +/- 10%

1.25 W0.5 W

0° C to 70° C -20° C to 80° C

-40° C to 85° C-50° C to 95° C

100G or 9800m/s (max)15G peak or 147m/s peak

1,000,000 hoursSupports BCH ECC up to 15-bit in 512 bytes

10 years70 mm x 60 mm x 6.5 mm



5


HIGH PERFORMANCE SERIESPhysical Dimensions

2.5" PATA (IDE) SSD Drive (High Performance Series)Tolerance size: +/- 0.15mm



6


HIGH PERFORMANCE SERIESPhysical Dimensions

1.8" PATA (IDE) SSD Drive (High Performance Series)Tolerance size: +/- 0.15mm



7


HIGH PERFORMANCE SERIESSM2235 Controller Block Diagram

Flash SSD Block Diagram

Solid State DriveNAND FLASH BASED / SATA II


8


HIGH PERFORMANCE SERIESPart Number and Ordering Information

PA XX SM XXX X X M XX M X

PATA

Form Factor and Size:25 = 2.5 inch18 = 1.8 inch

Controller:Silicon Motion

Capacity

64G = 64GB28G = 128GB

Manufacture:M = Macrotron

Package/Brand:IA = Industrial MacrotronIO = Industrial OEM RA = Retail MacrotronRO = Retail OEM

Temperature:I=Industrial Temp. (0~70°C) W=Wide Temp. (-40~85°C)

Housing:M = Metal Housing

N/A

Flash:S = SLC M = MLC

macrotron systems nc nand flash based / … state drive nand flash based / pata (ide) macrotron...

Documents