mag tool : multi-purpose magnetic holders€¦ · mag tool™: multi-purpose magnetic holders ......
TRANSCRIPT
336
6
Wel
ding
Acc
esso
ries
PearsonVendor Code: PEA
Mag Tool™: Multi-Purpose Magnetic Holders• Designedtoworkasanextrahand-enablesfastandaccurateholdingofany
ferrousobject.• Willholdbothsheetandtubeatanglesof45°,90°and135°.
• Compactdesignallowsuseintightplaces.• Canbeusedasdouble-sidedholderforweldingandassemblywork.• Idealforuseaswork-holderandpositionerinwelding,soldering,marking-off,
pipeinstallation,supporting,jigging,assembly,asaseparator,multi-unitsforheavyweldments,liftingetc.
• 10percarton.
Caution! Do not use with DC current when welding.
Part No. M-063
Part No. M-061Part No. M-060
Magnet:anisotropicferrite*Incontactwithferrousobjectsofadequatethicknessandsmoothsurfacefinish.
Part No. M-065
Part No.Dimensions Supports up to Direct lifts (each angle)* Net weightInches cm Lbs. Kg Lbs. Kg Oz. Grams
M-060(small) 3.6x2.4x0.44 9x6x1.1 28 12.5 11 5 6 170
M-061(medium) 4.7x3.4x0.56 12x8.5x1.4 48.5 22 18.5 8.5 12 340
M-063(large) 6.3x4x0.63 15.8x10x1.7 90 41 35 16 1.65 750
M-065(x-large) 7-9x5x0.88 20x12.5x21 122 55 48.5 22 2.75 1.25
SolderingWelding
Assembly Marking-Off Pipe Installation
For Lifting
Heavy Weldments
Multi-Units ForAs A Separator
Mag Tool / Tank Wrenches
Tank Wrenches• Heavy-dutyforgedtankwrenchesfitmostvalve
stemsandgasconnections.• Socket-holesaredeep,smoothandprecisely
sizedforsolidconnection.• Largerhandlesforfirmgripandbetterleverage.• Allwrenchesareindividuallypackaged.
Part No. UPC No. 0 27719 Description
Hole SizeCtn/Case
Inches mm
1013 013206 Tenwaytankwrench,3/16"-1-1/8"with3/8"socket 3/8 9.52 10/50
0250 013213 “T”handletankwrench,forLinde®acetylenevalves 9/32 7.14 10/100
0020 013305 “T”handletankwrench,forcommercialacetylenevalves 3/8 9.52 10/100
0010 013312 “L”handletankwrench,forcommercialacetylenevalves 3/8 9.52 20/200
0005 013329 Boxtankwrench,for“B”&“MC”acetylenevalves 3/16 4.76 100/1000
Part No. 1013 Part No. 0250 Part No. 0010 Part No. 0005
www.middlesexgases.com
337
6
Welding Accessories
PearsonVendor Code: PEA
Pressure Gauges
Pressure Gauges• Premiumqualityreplacementgaugesarethe
industrystandard.• Oxy-cleanedweldinggauges(cleanedfor
oxygenperANSIB40.1STD.). Suitableforuseonoxygenservice,medical
equipmentandotherfuelgaseswhicharenon-corrosivetobrassorbronzeandwherestem-mountingisdesired.
• Polisheddrawnbrassorgoldpowderpaintedsteelwithone-piece,impact-resistantpolycarbonateposilocklens.
• Forusewithcompressedgasregulators,thesegaugesareanexcellentchoicefortheoriginalequipmentandreplacementapplications.Theywillprovidelong-lifeandsafeoperation.
• GaugesareU.L.listed.
Specifications:Case:Powderpaintedsteel(gold)or
polisheddrawnbrassLens:One-piece,impact-resistantpolycarbonateSocket:BrassConnection:1/4"N.P.T.-2"(50mm)and
2-1/2"(60mm)dialMovement:PrecisionmachinedallcopperalloyTube:CopperalloybourdontubePointer:Black-finishedaluminumDial-face:Easy-to-read,corrosion-resistant
aluminumdialAccuracy:3%-2%-3%perANSIB40.1gradeB
POP Part No.
Boxed Part No. Size PSI
PG-15100 PG-15100-B 1.5" 100
PG-15200 PG-15200-B 1.5" 200
PG-1530 PG-1530-B 1.5" 30
PG-15400 PG-15400-B 1.5" 400
PG-154000 PG-154000-B 1.5" 4000
PG-230 PG-230-B 2" 30
PG-2100 PG-2100-B 2" 100
PG-2200 PG-2200-B 2" 200
PG-2400 PG-2400-B 2" 400
PG-24000 PG-24000-B 2" 4000
PG-2530 PG-2530-B 2-1/2" 30
PG-25100 PG-25100-B 2-1/2" 100
PG-25200 PG-25200-B 2-1/2" 200
PG-25400 PG-25400-B 2-1/2" 400
PG-254000 PG-254000-B 2-1/2" 4000Gauge Cover Lens
GCL-2 2"
POP Part No.
Boxed Part No. Size PSI
BG-15100 BG-15100-B 1.5" 100
BG-15200 BG-15200-B 1.5" 200
BG-1530 BG-1530-B 1.5" 30
BG-15400 BG-15400-B 1.5" 400
BG-154000 BG-154000-B 1.5" 4000
BG-230 BG-230-B 2" 30
BG-2100 BG-2100-B 2" 100
BG-2200 BG-2200-B 2" 200
BG-2400 BG-2400-B 2" 400
BG-24000 BG-24000-B 2" 4000
BG-2530 BG-2530-B 2-1/2" 30
BG-25100 BG-25100-B 2-1/2" 100
BG-25200 BG-25200-B 2-1/2" 200
BG-25400 BG-25400-B 2-1/2" 400
BG-254000 BG-254000-B 2-1/2" 4000
BG-260 BG-260-B 2" 60
BG-2600 BG-2600-B 2" 600
BG-23000 BG-23000-B 2" 3000
BG-2560 BG-2560-B 2-1/2" 60
BG-25600 BG-25600-B 2-1/2" 600
BG-251000 BG-251000-B 2-1/2" 1000
BG-253000 BG-253000-B 2-1/2" 3000Gauge Cover Lens
GCL-25 2-1/2"
Polished Drawn BrassBG Series
Powder Painted SteelPG Series
www.middlesexgases.com
338
6
Wel
ding
Acc
esso
ries
Part No. UPC No. 0 27719 DescriptionSteel rotary filesCSA-5 001432 1/2"X7/8",cylindricalshapeCSF-5 001449 1/2"X7/8",roundtreeshapeCSD-5 001456 1/2"X1/2",ballnoseshapeCSC-5 001470 1/2"X7/8",cylindricalshapeCSL-4 001487 1/2"X7/8",14˚angleshapeRFS-5 032856 Steelrotaryfilekit,5pc.setSteel rotary raspsRA-6 001531 CylindricalshapeRC-6 001579 BallnoseshapeRE-6 001586 OvalshapeRM-6 001623 Coneshape
Tungsten Carbide, Rotary Burs (Double Cut)• Tungstencarbiderotarybursofferperfectsolutionsfortheweldingjobs:trimmingwelds,
grindingsmoothfillets&preparationforweld.• Tungstencarbidebursgiveyoulongerlife,duetotheoptimumcoordinationofnumber
offlutes,spiralangle,rakeangleandconcentricity.• Designedforhighstockremovalrateswithproportionatelonglife.• Superiorperformanceformachiningofmaterialswithanytensilestrength.• Themostcommonusedbursinshapesandsizesareasfollows,indoublecut.• Allrotaryburshaveastandardshankof1/4"(6mm)andpackaged1piecetoapack.• 10percarton.Note:Uselowerspeedswhencuttingharderferrousmaterialsandhigherspeedsforsofternon-ferrousmaterials. SD-5-DCSL-4-DCSA-5-DCSF-5-DCSC-5-DC
Steel Files and BrushesHalf-Round File, Bastard• Manufacturedfromthefinestqualitymaterialsforlonglife.• Uniformincutensuresquickstockremoval.• Extremelydurableandscientificallybalanced.• Doublecutonbothsidesforoutstandingperformance.
Scratch Brush, Long and Shoe Handle• Usedforremovingrust,scale,paint,solderetc.• Additionalusesincludecleaningthreads,files,
metalpartsandcastings.• Availableincarbonorstainlesssteel.
Brass Brush, Toothbrush Style 3 x 7 Rows• Lightdutycleaningofhard-to-reachspotsand
forcleaningweldsinconfinedareas.
Parts Cleaning Brush • Resistanttomostpartscleaningsolutions.• Greatforhard-to-reachspotsandforcleaning
inconfinedareascomeswithametalferruleformoresupport.
Part No. SH-46-CS
Part No. 388-CS
Part No. T-37-B
Rotary Burs / Steel Files and Brushes
Steel Rotary Files and Rasps• Rotarybursofferperfect
solutionsfortheweldingjobs:trimmingwelds,grindingsmoothfiletsandpreparationforwelding.
• Repairscanbeeasilydonebecauseofavarietyofshapesandsizesavailable.
• 10percarton
Part Nos: RM-6Note:Uselowerspeedswhencuttingharderferrousmaterialsandhigherspeedsforsofternon-ferrousmaterials.
Part No. HRB12
CSF-5 CSD-5 CSC-5 CSL-4CSA-5
RE-6 RC-6 RA-6
Part Nos:
Part No. UPC No. 0 27719 Description Ctn
HRB12 013480 Half-roundfile,bastard,12",bulk 5/50HRB14 013497 Half-roundfile,bastard,14",bulk 5/50
Part No. PC-1P
Part Nos:
Part No. UPC No. 0 27719 Description Ctn
T-37-B 001609 Brassbrush,3x7rows,bulk 50/600T-37-SS 003931 Stainlesssteelbrush,3x7rows,bulk 50/600
Part No. UPC No. 0 27719 Description Ctn
Long handle388-CS 033709 Scratchbrush,bulk 12/120388-SS 033716 Stainlesssteelbrush,bulk 12/120Shoe handleSH-46-CS 033723 Shoehandlebrush,bulk 12/120SH-46-SS 033730 Stainlesssteelbrush,bulk 12/120
Part No. UPC No. 0 27719 Description Ctn
PC-1P 001593 Partscleaningbrush,bulk 50/300
PearsonVendor Code: PEA
www.middlesexgases.com
339
6
Welding Accessories
Part No. AF-2 Part No. AF-3 Part No. AF-50
Myclass™
Maintenance Class• 10percarton.
Part No. UPC No.0 27719
Amperage Capacity
Electrode Capacity Cable Capacity Length WeightInches mm AWG mm2 Inches mm oz. grams
PA-532 007465 200 Upto5/32 4.0 2/0 70 8 215 15 415PA-316 007519 250 Upto3/16 4.8 2/0 70 9 235 16 450PA-732 007564 300 Upto7/32 5.6 2/0 70 10 250 19 530PA-14 007618 350 Upto1/4 6.4 4/0 105 11 275 22 630PA-14-HD 011172 400 Upto1/4 6.4 4/0 105 11 280 23 650PA-38-HD 011226 500 Upto3/8 10 4/0 105 12 310 30 850
Electrode Holders• Ergonomicallydesigned.• Leverforgoodhandclearanceandbetterhold.• Lightweightandeasy-to-use.• Availableinacompleterangeofstyles,sizes&capacities(150-500amp.)foraccommodatingelectrodes
from1/16"(1.5mm)through3/8"(10mm)fromeconomicallypricedtoheavy-dutymodels.• Madefromhighqualitymaterialsforbothhighconductivityandimprovedcableconnections.• Efficientgroovedjawdesigninsuresfirmelectrodegrip.• Fullyinsulated,highstrengthspringforexcellentgrippingpower.• Heavy-duty,shock-proofnylonhandle.• Suppliedwithanallenwrenchandcableconnectionferruleassuringefficientconnectionandminimizing
cablestrandbreakageattheconnection.
Part No. PA-532 Part No. PA-732 Part No. PA-38-HD
Hyclass™
High Tong Type• 10percarton.
Part No. UPC No.0 27719
Amperage Capacity
Electrode Capacity Cable Capacity Length WeightInches mm AWG mm2 Inches mm oz. grams
AF-1 007267 150 Upto5/32 4.0 1/0 50 8 215 14 390AF-2 007311 200 Upto5/32 4.0 1/0 50 8 215 14 390AF-25 011127 250 Upto3/16 4.8 2/0 70 8 215 14 400AF-3 007366 300 Upto1/4 6.4 2/0 70 10 250 22 610AF-50 007410 500 Upto3/8 10 4/0 105 12 310 28 800
Electrode Holders
Model No. Part No. UPC No.0 27719
Amperage Capacity200 250 300 350 400 500
PA-532TI-4 010625
•
PA-316 •
PA-732
TI-5 010670
•
PA-14 •
PA-14-HD •
PA-38-HD TI-6 010724 •
Replacement Parts for Hyclass™
Tip Insulators• Upperandlowertipinsulatorsaresoldasaset.
Model No. Part No. UPC No.0 27719
Amperage Capacity150 200 250 300 500
AF-1
TI-1 010472
•
AF-2 •
AF-25 •
AF-3 TI-2 010526 •
AF-50 TI-3 010571 •
Replacement Parts for Myclass™
Tip Insulators• Upperandlowertipinsulatorsaresoldasaset.
MatchyourPearson®electrodeholdertotheelectrodesizeandamperageusedforgreatestefficiency.
MatchyourPearson®electrodeholdertotheelectrodesizeandamperageusedforgreatestefficiency.
PearsonVendor Code: PEA
www.middlesexgases.com
340
6
Wel
ding
Acc
esso
ries
Electrode Holders
Part No. UPC No.0 27719
Amperage Capacity
Electrode Capacity Cable Capacity Length WeightInches mm AWG mm2 Inches mm oz. grams
JH-1 011370 250 Upto3/16 4.8 1/0 50 8 215 15 430AW-C 011424 300 Upto1/4 6.4 2/0 70 10 250 22 610A3-S 011479 500 Upto3/8 10 4/0 105 13 325 32 900
Part No. JH-1 Part No. AW-C Part No. A3-S
Proclass™
Production Class• 10percarton.
Replacement Parts for Proclass™
Tip Insulators• Upperandlowertipinsulatorsaresoldasaset.
MatchyourPearson®electrodeholdertotheelectrodesizeandamperageusedforgreatestefficiency.
Model No. Part No. UPC No.0 27719
Amperage Capacity200 300 500
JH-1 TI-9 012377 •
AW-C TI-10 012421 •
A3-S TI-11 012476 •
MatchyourPearson®electrodeholdertotheelectrodesizeandamperageusedforgreatestefficiency.
Electrode HoldersSTUB™- Twist type (Stub Nose)• Lightweightandeasy-to-use.• Bettermaneuverability-greatfortightplaces.• Excellentforverticalwelding(Optimaltype).• Madefromhighqualitymaterialsforbothhigh
conductivityandimprovedcableconnections.• Efficientgroovedjawdesigninsures
firmelectrodegrip.• Angle-headallowsexcellentvisibilityof
productionwork(stubtype).• Fullyinsulated,highstrengthspringfor
excellentgrippingpower.• Heavy-duty,shock-proofnylonhandle.• Suppliedwithanallenwrenchandcable
ferruleassuringefficientconnectionandminimizingcablestrandbreakageattheconnection.
• 10percarton.
Part No. 40-B
Part No. UPC No.0 27719
Amperage Capacity
Electrode Capacity Cable Capacity Length WeightInches mm AWG mm2 Inches mm oz. grams
40-B 007663 400 Upto3/16 4.8 3/0 95 8-3/4 220 17 490
Replacement Part for STUB™
Head AssemblyModel No. Part No. UPC No.
0 27719Amperage Capacity
40-B 40-B-HA 011271 400
Part No. 40-B-HA
PearsonVendor Code: PEA
www.middlesexgases.com
341
6
Welding Accessories
Electrode Holders
SupraGrip™
• Madefromhighqualitymaterialsforbothhighconductivityandimprovedcableconnections.
• Heavy-dutymodelsareavailableinwiderangeofsizesandcapacities(200-600amp.)foraccommodatingelectrodesfrom1/16"(1.5mm)through3/8"(10mm).
• Bettermaneuverability-greatfortightplaces.• Excellentforverticalwelding.• Straight-headallowsexcellentvisibilityof
productionwork.• Highstrength,heavy-duty,fully-insulatedshock
proofhandle.• Suppliedwithanallenwrenchandcableconnection
ferruleassuringefficientconnectionandminimizingcablestrandbreakageattheconnection.
• Newlydesignedelectrodeholder.• 10percarton.
Part No. SG-40
Part No. UPC No.0 27719
AMP Capacity
Electrode Capacity Cable Capacity Length WeightInches mm AWG mm2 Inches mm oz. grams
SG-20 002668 200 Upto5/32 4.0 #1 35 8-3/4 220 12 330SG-40 002682 400 Upto5/16 8.0 3/0 95 10-1/4 260 19 530SG-60 002712 600 Upto3/8 10.0 4/0 105 10-3/4 275 23 630
MatchyourPearson®electrodeholdertotheelectrodesizeandamperageusedforgreatestefficiency.
Part No. HM-30
MatchyourPearson®electrodeholdertotheelectrodesizeandamperageusedforgreatestefficiency.
Handyman™
• Lightweightandeasy-to-use.• Economicallypricedandavailableintwomostpopularmodels
(200&300amp.)foraccommodatingelectrodesupto3/16"(4.8mm).• Efficientgroovedjawdesigninsuresfirmelectrodegrip.• Fullyinsulated,highstrengthspringforexcellentgrippingpower.• Heavy-duty,shock-proofnylonhandle.• Suppliedwithanallenwrenchandcableconnection
ferruleassuringefficientconnectionandminimizingcablestrandbreakageattheconnection.
• 10percarton.
Part No. UPC No.0 27719
AMPCapacity
Electrode Capacity Cable Capacity Length WeightInches mm AWG mm2 Inches mm oz. grams
HM-20 028231 200 Upto5/32 4.0 #1 35 8 200 11 310HM-30 028293 300 Upto3/16 4.8 2/0 70 9-1/4 235 14 380
Replacement Parts for Handyman™
Tip Insulators• Upperandlowertipinsulatorsaresoldasaset.
Model No. Part No. UPC No.0 27719
Amperage Capacity200 250 300 400
HM-20TI-14 002736
•HM-30 •
Model No. Part No. UPC No.0 27719
Amperage Capacity150 200 250 400 600
SG-20 SG-20-HA 002774 •SG-40 SG-40-HA 002781 •SG-60 SG-60-HA 002811 •
Replacement Parts for SupraGrip™
Head Assembly• Upperandlowertipinsulatorsaresoldasaset.
Model No. Part No. UPC No.0 27719
AMP Capacity150 200 250 300 350 400 500
TI-1AF-1
010472•
AF-2 •AF-25 •
TI-2 AF-3 010526 •TI-3 AF-50 010571 •
TI-4PA-532
010625•
PA-316 •
TI-5PA-732
010670•
PA-14 •PA-14-HD •
TI-6 PA-38-HD 010724 •
TI-7UT-20
012278•
UT-30 •TI-8 UT-40 012322 •TI-9 JH-1 012377 •TI-10 AW-C 012421 •TI-11 A3-S 012476 •
TI-14HM-20
002736•
HM-30 •
Tip Insulators• Upperandlowertipinsulatorsaresoldasaset.
Top
Bottom
PearsonVendor Code: PEA
Part No. UPC No.0 27719
Amperage Capacity
Electrode Capacity Cable Capacity Length WeightInches mm AWG mm2 Inches mm oz. grams
JH-1 011370 250 Upto3/16 4.8 1/0 50 8 215 15 430AW-C 011424 300 Upto1/4 6.4 2/0 70 10 250 22 610A3-S 011479 500 Upto3/8 10 4/0 105 13 325 32 900
www.middlesexgases.com
342
6
Wel
ding
Acc
esso
ries
Ground Clamps
Part No. EG-200 Part No. EG-300 Part No. EG-500
Part No. MGC-300 Part No. MGC-500
Part No. UPC No.0 27719
AMP Capacity
Jaw Opening Cable Capacity Length WeightInches mm AWG mm2 Inches mm oz. grams
EG-200 007762 200 Upto1-1/2 40 6-4 10-16 7 175 8 210
EG-300 007816 300 Upto2 50 2-1 25-35 8 200 14 390
EG-500 007861 500 Upto2 50 1/0-4/0 50-105 10 245 17 490
Part No. UPC No.0 27719
AMP Capacity
Cable Capacity WeightAWG mm2 oz. grams
MGC-300 008219 300 1-1/0 35-50 21 600
MGC-500 008264 500 2/0-4/0 50-105 22 623
Part No. LGC-200 Part No. LGC-300 Part No. LGC-500
Part No. UPC No.0 27719
AMP Capacity
Jaw Opening Cable Capacity Length WeightInches mm AWG mm2 Inches mm oz. grams
LGC Series LGC-200 008066 200 Upto1 25 1-1/0 35-50 5-1/4 130 12 340
LGC-300 008110 300 Upto1-1/2 40 1/0-3/0 50-95 7-1/4 180 21 600
LGC-500 008165 500 Upto1-1/2 40 2/0-4/0 70-105 8 200 23 652
Part No. PGC-200 Part No. PGC-300 Part No. PGC-500
Part No. UPC No.0 27719
AMPCapacity
Jaw Opening Cable Capacity Length WeightInches mm AWG mm2 Inches mm oz. grams
PGC Series PGC-200 007915 200 Upto1 25 1-1/0 35-50 6 150 16 445
PGC-300 007960 300 Upto1-1/2 40 1/0-3/0 50-95 8 200 25 715
PGC-500 008011 500 Upto2 50 2/0-4/0 70-105 9 225 35 990
Part No. GC-2 Part No. GC-3 Part No. GC-5
Part No. UPC No.0 27719
AMPCapacity
Jaw Opening Cable Capacity Length WeightInches mm AWG mm2 Inches mm oz. grams
GC Series GC-2 011721 200 Upto1 25 4-1/0 16-50 7 175 17 490
GC-3 011776 300 Upto1-1/2 40 1/0-2/0 50-70 8-1/2 210 22 630
GC-5 011820 500 Upto1-1/2 40 2/0-4/0 70-105 9-1/2 235 28 800
Ground Clamps• Pearson®groundclampscomeinarange
ofmodels-fromlightweighttoheavyduty,highcapacitymodels.
• Suppliedwithanallenwrenchandcableconnectionferruleassuringefficientconnectionandminimizingcablestrandbreakageattheconnection.
PGC, LGC and GC Series• Contouredhandleleverforeasyjawopening.• Stronggrippingpower.• Largecontactareaassurespositivegrounding.• Fullyinsulatedspring.• Conductorbodyholdsthecablesecurely.• Largehexscrewcableconnectionassures
safecableconnectioneverytime.• 10percarton.
Ground Clamps• Uniquedesignhelpseliminatearcblowand
makesiteasytochangegroundlocationforthebestresults.
• Largecontactareaassurespositivegrounding.
Steel Ground Clamps- EG Series• Zincplated.• Largehexscrewcableconnection
assuressafecableconnectioneverytime.• PurecopperbraidedshuntsonEG-500-allows
bothjawstocarryweldingcurrent.• 10percarton.
Magnetic Ground Clamps- MGC Series• Largecontactareaassuresexcellent
electricalcontact.• Stronggrippingpower:
Pullstrength=130Gauss.• Groundingconcealedtoprevent
dislodgement.• Insulatedtopreventannealing.• Easyinstallationorremoval.• Mostpopularmagneticground
clampsinthemarket.• 10percarton.
PearsonVendor Code: PEA
www.middlesexgases.com
343
6
Welding Accessories
Battery Clamps / Cable Connectors and Adapters
Battery Clamps• Excellentelectricalandphysicalproperties.• Allsteeljaws.• Hammer-oncopperconnection.• Heavydutytensionspringgivespositive
connectiononfrontandside.• Vinylinsulationthatishighlyresistanttooil,
acid,abrasion,chemicalsandozone• Colorcoded-redandblack.
Part No. BC-600B Part No. BC-600R
Part No. UPC No.0 27719 Description AMP
Jaw Opening Cable Capacity WeightCtn
Inches mm AWG mm2 oz. gramsBC-600 001500 Batteryclamps,set 600 Upto1-1/2 40 1-3/0 35-95 16 435 10BC-600R 001524 Batteryclamp,red 600 Upto1-1/2 40 1-3/0 35-95 8 218 20BC-600B 001548 Batteryclamp,black 600 Upto1-1/2 50 1-3/0 35-95 8 218 20
Part No. DA-5095 Part No. DA-1025
Cable ConnectorsMBP Series• Designedtoefficientlyconductthecurrent
throughadetachable-typeconnection.• Cam-actiondesignallowslock-inwithatwist
andpullsthetwohalvestightlytogether.• Metalpartsareprecisionmachinedfromheavy
brassextrusion-resistsrust&corrosion.• Connectorcovershaveremarkableresistance
toheat,cold,abrasion,ozone,oils&solvents.Taperedends.Lock-outmoisture,oilanddirt.
• Connectorcoversarespeciallycompoundedtobeflameretardant.
Part No. UPC No. 0 27719
Cable CapacityCtn
AWG mm2
Male 1-MBP-1 008462 4-1 16-35 202-MBP-1 008516 1/0-3/0 50-95 204-MBP-1 008561 3/0-4/0 95-105 20Female 1-MBP-2 008615 4-1 16-35 202-MBP-2 008660 1/0-3/0 50-95 204-MBP-2 008714 3/0-4/0 95-105 20Sleeves
1-MBP-IS For:1-MBP(pair)
2-MBP-IS For:2-MBP(pair)
4-MBP-IS For:4-MBP(pair)
Part No. SK-25 Part No. BK-25
Part No. SK-50 Part No. BK-50
Part No. SK-70 Part No. BK-70
Part No. SK-95 Part No. BK-95
Part No. UPC No. 0 27719
Cable CapacityCtn
AWG mm2
Euro Cable Adapter (DINSE® Style to Pearson®)DA-1025 002729 6-2 10-25 10DA-5095 009162 1/0-3/0 50-95 10
Part No. UPC No. 0 27719
Cable CapacityCtn
AWG mm2
DINSE ® Style- Euro Cable PlugSK-25 008769 6-2 10-25 10SK-50 008813 1-1/0 35-50 10SK-70 008868 1/0-2/0 50-70 10SK-95 008912 2/0-3/0 70-95 10DINSE ® Style- Euro Cable Socket BK-25 008967 6-2 10-25 10BK-50 009018 1-1/0 35-50 10BK-70 009063 1/0-2/0 50-70 10BK-95 009117 2/0-3/0 70-95 10
PearsonVendor Code: PEA
Part No. UPC No. 0 27719 AMP Capacity
Jaw Opening Cable Capacity Length WeightInches mm AWG mm2 Inches mm oz. kg.
CGC and WGC Series CGC-600 011929 600 Upto4 100 1/0-4/0 50-105 8-1/4 205 63 1.8WGC-600 011974 600 Upto4 100 1/0-4/0 50-105 9-1/2 235 58 1.64
Part No. WGC-600
WGC and CGC Series• Largecontactareaassuresexcellent
electricalcontact.• Highclampingpressure.• Highalloyconductorassuresmaximum
conductivity.• 10percarton.
Part No. CGC-600
Euro Cable Plug & Socket Dinse® Style• IntroducingthefinestinternationalDinse®style,
Eurocableplugandsocketsforuseonmostweldingpowersources.
• Simpleandsafe-justplug-inandtightenbyashort,strongturnforpositivestop-lockactionandmaximumconductivity.
Euro Cable Adapter Dinse® Style to Pearson®
• Eurocableadapter(Dinse®styletoPearson®)allowstointerconnectwithmostothertypesofU.S.Cableconnectors-allowscompleteflexibility.
Part No. UPC No. 0 27719
Cable CapacityCtn
AWG mm2
MBP Series (paired)1-MBP 008318 4-1 16-35 102-MBP 008363 1/0-3/0 50-95 104-MBP 008417 3/0-4/0 95-105 10
www.middlesexgases.com
344
6
Wel
ding
Acc
esso
ries
Cable Connectors / Cable Lugs / Crimping Tools
Cable Connectors and Cable LugsEuro Machine Panel Plug & Panel Socket Dinse® Style• Designedtoefficientlyconductcurrentonthe
widestrangeofweldingunitsandinverter-basedpowersources.
• Simpleandsafe-justplug-inandtightenbyashort,strongturnforpositivestop-lockactionandmaximumconductivity.
Part No. SE-1025
Part No. SE-3570
Part No. BE-1025
Part No. BE-3570 Part No. BE-7095
Part No. UPC No. 0 27719
Cable CapacityCtn
AWG mm2
Panel Plug
SE-1025 009216 6-2 10-25 10
SE-3570 009261 1-2/0 35-70 10Panel Socket
BE-1025 009315 6-2 10-25 10
BE-3570 009360 1-2/0 35-70 10
BE-7095 009414 2/0-3/0 70-95 10
Cable LugsSolder Type• Precisionmadefromcoppertubing.• Extralongbarrelforeasysolderingorpossible
connection.• Easytouse-flared-endforeasy
cableaccess. L-68L-46 L-62 L-120 L-3040
Hammer-on Type• Easyandconvenienttouse-nospecialtools
required.• Hammerblowmakesasolidconnection.• Excellentpull-outstrengthwithoutsoldering
orbolting.HL-1020HL-21 HL-62
Crimpler™ Heavy-Duty Crimping Tool• Heavyduty,doubleslidesupportforrigidity.• Durablespring-loadedmechanismholds
terminal/luginplace.• Delivers1400-1800lbs.(635-815kg.)pull-out
resistance(terminaltocable).• Deepthroatforeasyinsertionofterminal/lug
fittedoncableend.• Easy-to-readscaleonbothsidesofdrivepunch
preventsunder-crimping.• Widebaseforstability-excellentforwelding
toabumperoffleetservicetruckorforboltingtoabench.
Part No. CM-20
Part No. UPC No.0 27719
AMPCapacity
Cable Capacity Stud Hole I.D. of SocketPcs./Card Ctn
AWG mm2 Inches mm Inches mmL-68* 012025 75 6-8 8-10 21/64 8.3 10/32 8.0 10 10
L-46* 012070 100 4-6 10-16 21/64 8.3 11/32 8.5 10 10
L-62* 009469 150 6-2 10-25 17/32 13.5 1/2 13 10 5
L-120* 009513 200 1-2/0 35-70 17/32 13.5 35/64 14 10 5
L-3040* 009568 250 3/0-4/0 95-105 17/32 13.5 5/8 16 5 5
Part No. UPC No.0 27719
AMP Capacity
Cable Capacity Stud Hole I.D. of SocketPcs./Card Ctn
AWG mm2 Inches mm Inches mmHL-62* 012124 150 6-2 10-25 17/32 13.5 1/2 13 10 5
HL-21* 009766 200 2-1 25-35 17/32 13.5 1/2 13 5 5
HL-1020* 009810 300 1/0-2/0 50-70 17/32 13.5 35/64 14 5 5
HL-3040* 009865 500 3/0-4/0 95-105 17/32 13.5 5/8 16 5 5
Part No. UPC No.0 27719 Description
Cable Capacity Jaw Opening Weight
AWG mm2 Inches mm oz. grams
CM-20 004761 Crimpingtool 6-4/0 10-105 Upto1 25 24 680
Part Nos.
Part Nos.
*Alsoavailableinbulk.
*Alsoavailableinbulk.
PearsonVendor Code: PEA
www.middlesexgases.com
345
6
Welding Accessories
4-Way Pick Set• Knurled5"(125mm)aluminumhandle.• Fourtemperedsteelpicks3"(75mm)longscrewintohandle.• Comeswithhandyvinylprotectivecase.• Idealfor: -Removestuckpartsfromtightareas. -Retrievelostnuts,bolts,washers,toolsetc. -ReplaceO-rings. -Idealfordielayouts. -Markingyourtools.• 10percarton.Part No. PS-4 (UPC No. 0 27719 03381 5)
Ratch-It Tie Downs with ChainsRT-112 and RT-115• Ratedcapacity:
RT-112-1,500lbs/680kg(averagestrapstrength)RT-115-3,000lbs/1360kg(averagestrapstrength)
• QuickAutomaticRelease.• Rustresistant,cadmiumplatedsteelhardware.• Weatherresistantstraps. Vinylcoatedhooksateachend
thatwon’tscratch(RT-112).• Highstrength,brightsafetyyellow
webbingwithhookateachendtoattachdirectlyorloopbackonto“D”ring(RT-115).
• RT-112Sisexcellentfor“SingleHandedUse”(Comeswithoutendhooks).
RT-215 and RT-227• Ratedathighcapacity. RT-215-5,000lbs/2270kg(averagestrapstrength). RT-227-10,000lbs/4540kg(averagestrapstrength).• Fullyadjustableratchettie
downusedtosecurelarge,heavyorbulkyloads.
• Webbingismadewithstrong,lightweightandrugged100%polyester,identifiedbybrightyellowsafetystrap.
RT-212C and RT-227C• Ratedathighcapacity: RT-215C-10,000lbs/4540kg(averagestrapstrength). RT-227C-15,000lbs/6800kg(averagestrapstrength).• Fullyadjustableforsecuring
large,heavyorbulkyloads.• Rustresistant,cadmium
platedsteelhardware.• Heavy-dutyanchorchainateachendwithgrabhook.• Extra-wideandlongratchethandleprovidesextraleverage.• Weatherresistantstraps.• Strong,lightweightandrugged100%polyesterwebbing,Identifiedbybright
yellowsafetystraps.• RT-212Ccomeswithratchethandleprotector:Heavydutysewnfabricpad
usedtoprotectsurfacefinishofcargoandratchetmechanismratchethandleprotectors,wearpadshelpprotectcargoandextendlifeofthetiedown.
Part No. UPC No. 0 27719 Size (ft) W x L Grab Hook Max. Cap. (Lbs.) Avg. Strap (Kg) Weight (Lbs.) Ctn/Case Pack
RT-112 006864 1"x12' 5/16" 1,500 680 1 10/40
RT-115 006918 1"x15' 3,000 1360 1.5 10/20
RT-215 006963 2"x15' 5,000 2270 6.5 1/5
RT-227 007113 2"x27' 10,000 4540 7 1/5
RT-212C 007168 2"x12'(chain5/16"x12") 5/16" 10,000 4540 7.85 1/5
RT-227C 007212 2"x27'(chain3/8"x12") 3/8" 15,000 6800 11.25 1/5
Rubber Tarp Straps• Superstrengthcompoundedrubberlastslonger.• Ozone,weather,wear,tearandabrasionresistant.• Resistsdeteriorationinoutdoorenvironments.• Reinforcedends.• Cadmiumplatedsturdysteel“S”hooks.• 10percarton.• 100percasepack.
Part No. UPC No. 0 27719 Length
RS-21 017594 21"
RS-31 017600 31"
RS-41 017617 41"
Part No. RT-112
Part No. RT-115
Part No. RT-215
Part No. RT-227C
21"
31"
41"
Picks / Tie Downs / Tarp Straps
PearsonVendor Code: PEA
www.middlesexgases.com
346
6
Wel
ding
Acc
esso
ries
Cam-Type and Fillet Weld Gage / Lightnin’ Bug
MasterGage™
• Highqualitystainlesssteel(sus304)bladestoresistrustandforlongerlife.
• Permitsquickandaccuratemeasuringofthemostpopularweldfilletsizesininchandmetric:1/8"-1"(3.2-25.4mm).
• Forinspectionofconcaveorconvexfilletwelds.• Bladesaredeburredforfineandsmoothedges.• Allsizesandnumeralsarelaseretchedintothe
surfaceforclarityandeasierreading.• Setofsevenbladescomesinahandy,vinylpocket
casewithsnaplock.• Measurementsarepossibleeitherininchesor
millimeters.Generallinearmeasurementsupto2"(50mm).
• 10percarton.Part No. MG-8: Cam-typeweldgage (UPCNo.027719012780)Part No. MG-11: Filletweldgage (UPCNo.027719012797)
Back View
Part No. MG-11
Part No. MG-8
FilletWeldThroatSize AngleofPreparation(0°To60°) Misalignment(High-low)
DepthofUndercut ExcessWeldMetal(CappingSize) FilletLegLength
Important Note:MasterGage™weldinggagesareintendedforgeneraldimensionalinspectionofweldedfabricationswhereclosetolerancesarenotexpected.Theyshouldnotbecomparedinprecisionwithgagesusedformeasuringmachinedcomponentsandwherehighestdegreeofaccuracyisrequired.Whereextremelyprecisemeasurementsarerequired,machineshopprecisionmeasuringinstruments,preferablyelectronicordigitalmustbeused.
Guide for Taking Measurements with MasterGage™
Fillet Weld Gage
Cam-Type Weld Gage
MG-8 MG-11
Lightnin’ Bug® Torch Lighter• Testedto30,000strikes.• Lightnin’Bug®isthehottestlittletorchlighteronthemarket.Itselectricmulti-sparkdischargeignites
allfuelgasesquicklyandeasily.• TheamazingnewenergygeneratorusedinLightnin’Bug®neverneedsflints,batteriesorcharging.• Easyandaccurateignitioninsuredbymulti-sparkdischarge:
5timesormorepersqueeze.• Durable:madeofhighqualitymaterials,theLightnin’Bug®
withstandssevereworkingconditions.Itszincplatedbodyresistsrustandcorrosion.
• Versatile:Lightnin’Bug®ignitesalmostallindustrialfuelgases,suchasoxy-acetylene,naturalgas,propane,methane,MAPP®,propylene,etc.
• 10percartonPart No. 08-100 (UPC No. 0 27719 01319 0)
Lightnin’Bug®isregisteredtrademarkofWorldwideWelding,Inc.
PearsonVendor Code: PEA
www.middlesexgases.com
347
6
Welding Accessories
Tip Drill Kit – 12 Piece• Mostpracticaltipcleaningtoolmade.• Cleansandtruesmoststandardorifices.• Containsmostcommonlyused12drills(#52-74)
inassortedsizes.• Completewithbuilt-inchuckand
pocketclip.• 10percarton.Part No. TDK-12 (UPC No. 0 27719 00122 7)
Tip Cleaners / Tip Drill Kit / Tip Refacing Tool / Key Ring
Tip Cleaners• Rustproof,stainlesssteelwire.• Fileincludedinthecase.• Uniformridgeswipeandpolishtheorificewall.• Tanglefreeloops.• Tapered-endsallowsmootheasyentrywithoutscratching.• 10percarton.
Standard, DeluxeSetof13cleanerswithfile.• Gagesizes:6through26forcleaning
drillsize:77-49.Part No. 0STC (UPC No. 27719 01714 3)
King SizeSetof13extra-longcleanerswithfile.• Gagesizes:6through26forcleaning
drillsize:77-49.Part No. 0KTC (UPC No. 27719 01715 0)
JumboSetof9cleanerswithfile.• Gagesizes:28through45forcleaning
drillsize:48-30.Part No. 0JTC (UPC No. 27719 00198 2)
MasterSetof22cleanerscombinesallstandardandjumbosizeswithfile.• Gagesizes:6through45forcleaning
drillsize:77-30.Part No. 0MTC (UPC No. 27719 01716 7)
Gage Wire Dia. Ridge Dia.Cleans Hole
Diameter (inch) Drill Size
Stan
dard
(STC
) and
Kin
g Se
ts (K
TC)
6 0.014 0.016 .018-.020 77-76
7 0.018 0.020 .021-.022 75-74
8 0.021 0.023 .024-.026 73-71
10 0.024 0.026 .028-.031 70-68
12 0.028 0.030 .032-.035 67-65
14 0.032 0.034 .036-.038 64-62
15 0.035 0.038 .039-.040 61-60
16 0.037 0.040 .041-.042 59-58
17 0.039 0.042 .043-.046 57
18 0.042 0.044 .046-.051 56
22 0.048 0.050 .052-.055 55-54
24 0.055 0.057 .060-.064 53-52
26 0.062 0.065 .067-.073 51-49
Jum
bo S
et
28 0.069 0.075 .076-.078 48-47
30 0.074 0.080 .081-.082 46-45
32 0.078 0.085 .086-.089 44-43
34 0.085 0.092 .094-.096 42-41
37 0.090 0.096 .100-.102 39-38
39 0.095 0.102 .104-.106 37-36
42 0.102 0.108 .110-.113 35-33
44 0.108 0.114 .116-.120 32-31
45 0.102 0.126 .128+ 30+
Tip Refacing Tool• Revolutionarytoolthateliminatesscale,slagand
orificedistortionfromcuttingtipfaces.• Justafewquickturnsandthetipsterrestoresthe
faceofyourtipstotheirclean,originalcondition.• Holdingthetipintheproperrefacingpositionis
easywiththetough,nylonshell.• 10percarton.Part No. TR-38 (UPC No. 0 27719 00110 4)
Mas
ter S
et (O
MTC
)
Welder’s Pin Key Ring• Handyforweldersandrepairmen-keysaresafeandsecure.• Attacheseasilytoastrap,beltlooporahandle.• Madefromhighqualitysteelwithhighlustrebrassfinish.• Resistsrustandcorrosion.• Individuallypoly-bagged.Part No. BK-110
PearsonVendor Code: PEA
www.middlesexgases.com
348
6
Wel
ding
Acc
esso
ries
PearsonVendor Code: PEA
Medical & MIG Cart / Spark Lighters
Cadymate Cylinder Container• Holds10lb.cylinders.• Storagespaceinwinder.Part No. CM-1020
Medical Cart• Willhold1DorEcylinder.Part No. MC-1DE
MIG Welding Cart• 3Shelves.• Casterwheels.• Weightcapacity125lbs.Part No. WC-1228
Handyguard• Holdsupto10lbs.of12"or14"electrodes.• Withstandstemperaturesupto225˚F(107˚C).Part No. HG-14-14"Part No. HG-18 -18"Part No. HG-36 -36"
Single Flint and Triple Flint Spark Lighters• Rounded-filesparklightersfeature
thelargesthoodandroundfileintheindustry.
• Triple-flintlighterisaqualitylightermadeforthedemandoftheweldingindustry.Ithasastrongframeandwiththreelargeflintsmakesdependableignitionunderallweatherconditions.
• Enduringpopularityismeritedbydependableperformance,easeofoperation,lightweightandlow-cost.
Part No. UPC No. 0 27719 Description Ctn/Case
2001 000022 Singleflintsparklighter,bulk(boxed) 10/100
2001-C 000039 Singleflintsparklighter,carded 10
2001F 000220 Replacementflintsforsingleflintsparklighter,(5pcs./Holder),20holders/box(bulk) 5/50
2001F-C 000237 Replacementflintsforsingleflintsparklighter,(5pcs./Holder),1holder/card
2001F-C2 000244 Replacementflintsforsingleflintsparklighter,(5pcs./Holder),2holders/card 10
4501 000046 Tripleflintsparklighter,bulk(boxed) 10/100
4501-C 000053 Tripleflintsparklighter,carded 10
4501F 000251 Replacementflintsfortripleflintsparklighter,bulk(boxed) 100/1000
4501F-C 000527 Replacementflintsfortripleflintsparklighter,carded(1pcs./Card) 10
4501F-C5 000534 Replacementflintsfortripleflintsparklighter,carded(5pcs./Card) 10
Part No. 4501FPart No. 4501Part No. 2001 Part No. 2001F
www.middlesexgases.com
514
9
Hand
Too
ls
MSA, PearsonVendor Code: MSA, PEA
Weld Clamp 9", 2-Jaw• Holdspartsinproperalignment-evenwhen
materialisnotofidenticalthickness.• Positivelockleaveshandsfree.• Deep-throatedU-shapedjawsprovide
perfectvisibility.• 10percartonPartNo.WC-9(UPCNo.027719001258)
Malleable Iron C-Clamps• Newdesignframeformaximumstrength.• Steelspindlesarecopperplatedforspatterprotection.• Swivelpadsadjustfreelytobearevenlyonclampedpart.• Lacqueredfinish.Part No. CC-6Part No. CC-5
General Accessories / Locking Pliers / C-Clamps
Locking Pliers, 6" and 11"• Highgradealloysteelformaximumdurability
andperformance.• Micro-adjustmentforquick
pre-adjustingandrepeatclamping.• Powerfullockingmechanismprevents
slippage.• Jawsopenwideforversatility.• Lockssecurelywithhandsqueeze.• Easy-releasetrigger.• 10percartonPartNo.LC-6(UPCNo.027719001388)PartNo.LC-11(UPCNo.027719001371)
Locking Sheet Metal Tool, 8"• Lockstoworkwithpowerfulgripforsmoothand
accuratebendingandseaming.• Micro-adjustingscrewandeasy
releasetrigger.• Lockstoworkwithpowerfulgrip.• Makesallkindsofbending,formingandcrimping
jobsfasterandeasier.• 10percartonPartNo.LS-8(UPCNo.027719001395)
Part No. UPC No. 0 27719
Throat Capacity Depth Spindle Dia.Ctn
Inches mm Inches mm Inches mm
CC-2 000541 0-2 0-50 1-1/8 28 7/16 11 10
CC-3 000558 0-3 0-75 1-5/8 40 7/16 11 10
CC-4 001074 0-4 0-100 2-1/4 56 7/16 11 10
CC-5 001081 0-5-1/4 0-130 2-5/8 65 1/2 13 10
CC-6 001098 0-5-7/8 0-147 3-1/4 83 5/8 16 10
Heavy Duty, Drop Forged C-Clamps• Rugged,heavydutydropforgedsteelframe.• Non-slipclampingonallshapes.• Extrathroatdepth.• Steelspindlesarecopper
platedforspatterprotection.• Swivelpadsadjustfreelyto
bearevenlyonclampedpart.• Lacqueredfinish.• Individuallyboxedforeasy
storageandprotection.Part No. 412PPart No. 410PPart No. 408P
Part No. UPC No. 0 27719
Throat Capacity Depth Spindle Dia. Proof TestCtn
Inches mm Inches mm Inches mm lbs. Kg
402P 013336 0-2-1/8 0-54 2-1/4 57 9/16 14 3500 1590 20
404P 013343 0-4-1/2 0-114 3-1/4 83 3/4 19 6200 2810 10
406P 013367 0-6-1/16 0-154 4-1/8 105 3/4 19 6900 3130 10
408P 013374 0-8-1/4 0-210 5 127 3/4 19 6600 3000 5
410P 013381 2-10-1/8 50-257 6 152 3/4 19 8000 3630 5
412P 013411 2-12-1/4 50-311 6-5/16 160 7/8 22 9300 4220 5
Hands-Off™ Chisel GripTheHands-Off™ChiselGripkeepshandsawayfromthepointofcontact.Itisergonomicallydesignedtomatchthespecificshapeofthehumanhandforacomfortableandfirmgrip.• Economicalandpermitsfaster,safer,moreaccuratework.• Easyadjustmenttoholdavarietyofchiselsandstakesupto1"diameter.• Vibration-absorbinghandle.• Easesawkwardhandpositioning.• Sparkresistant.Part No. 10040018
Ergonomic Tool Holders• Holdswrenches,chisels,etc.• Vibration-absorbingdesign,• Attachtobroomhandlesandmopsforbettergrip.• Easesawkwardhandpositioning.
Part No. Description
507005 ToolHolder,18"
507006 ToolHolder,sparkresistant,18"
www.middlesexgases.com
515
9
Hand Tools
Magnet with Telescopic Handle, 30" Reach• Lifts10lbs.(4.5kg).• Telescopesfrom7"(180mm)to30"(760mm).• Telescopichandleislightweightandstrong.• Capshieldsthesidesofthemagnetfromattaching
tounwantedmetalsurfaces.• Comfortabletexturedcushiongripkeepshandle
secureeveninwetoroilyhands.• Pocketclipkeepsithandyandsecure.Part No. TM-10 (UPC No. 0 27719 00283 5) 10percartonPart No. TM-10-B (bulk, case pack only) 100percarton
Part No. UPC No.0 27719 AMP Capacity
Jaw Opening Cable Capacity Length WeightInches mm AWG mm2 Inches mm oz. kg.
CGC and WGC Series CGC-600 011929 600 Upto4 100 1/0-4/0 50-105 8-1/4 205 63 1.8
WGC-600 011974 600 Upto4 100 1/0-4/0 50-105 9-1/2 235 58 1.64
Part No. WGC-600
WGC and CGC Series• Largecontactareaassuresexcellentelectricalcontact.• Highclampingpressure.• Highalloyconductorassuresmaximumconductivity.• 10percarton.
PearsonVendor Code: PEA
Welpers / Clamps / Telescoping and Magnetic Tools
Mirror with Flex Handle, 15" Reach• Fast,accuratevisualinspectionofhiddenareas.• Offerslimitlessnumberofpositions.• Withstandsthestressesofconstantrepositioning.• Non-sliphandle.• 10percarton.Part No. FM-15 (UPC No. 0 27719 00123 4)
Magnet with Flex Handle, 15" Reach• Neodymium-Iron-Boronextrahighfluxmagnet
forgreaterpick-up.• OutperformsstandardAlincoVmagnet4to1.• Powerfulenoughtopickupferrousobjects
weighing1.5lbs(680g).• Long15"(380mm)overallreach.• Perfecttooltopickupferrousmetalobjectsin
hard-to-reachanglesandremoteareas.• Abendablecoppershaftenablesyoutoretrieve
athard-to-reachanglesandaroundobjects.• 10percarton.Part No. FM-14 (UPC No. 0 27719 00123 4)
Mirror with Telescoping Handle, 15" Reach• Fast,accuratevisualinspectionofhiddenareas.• Almostofferslimitlessnumberofpositions.• Doubleballjointlinksswivelmirrorsforviewingto360˚.• Non-rotatinghexrodspreventmirrorfromswingingoutof
alignmentwheninuse.• Precisionengineeredlinkswithstandthestressesof
constantrepositioning,movefreely,holddesiredposition.• Insulatingvinylgrip.• Mirrorsize:2-1/8"x3-1/2"(52mmx88mm)• Overalllength:11"(280mm),extendsto15"(380mm).Part No. OK-2 (UPC No. 0 27719 00286 6)10percartonPart No. K-2-B (bulk, case pack only)100percarton
Welper® YS-50 MIG Plier • Specialtymulti-purposetooldesignedspecificallyforCO2weldingoperations.• AsinglepairwhichserveseightpurposesforMIGwelding-savestimeandincreasesproductivity.• Designedforhammering,wirecutting,insulationbushingremoval&installationanddrawingoutwire.• Ideallysuitedfortheremovalofspatterfrominside,outsideandthenozzle-end.• Perfectforremovalandinstallationofcontacttipsandnozzles.• Springloadedforeasyopeningandclosing.• Manufacturedfromhighquality
carbonsteelforstrengthanddurability.• ThegenuineMIGplier(worldwide
patented).• Convenientblisterpackagingfor
“point-of-purchase”display.• 10percarton.
Part No. YS-55
Part No. UPC No. 0 27719 Description
Weightoz. grams
YS-20 032610 Plier,mini-MIG 6.4 181
YS-25 002828 HolsterforYS-20
YS-50 004563 Welper™,MIGplier 10 285
YS-55 004617 HolsterforYS-50
Part No. YS-50
Part No. CGC-600
www.middlesexgases.com
516
9
Hand
Too
ls
Barracutter™ Cable Cutter• Highcarbonsteelhandshearforcuttingweldingcablethrough4/0(105mm2),
powercablethrough6/4(65mm)andrubberhosethrough1/2"(13mm).• Excellentformaintenance,repair,rigging,fabrication,toolcribs,out-fitting
splicingandmanyothers.• Nojawstoreplace.• Heavyvinylcoveredsafetyhandles.• 10percarton
Caution:Designedforcopperandaluminumcablesonly.
Part No. UPC No. 0 27719Cable CapacityAWG mm2
B-52 004815 6-4/0 10-105
PearsonVendor Code: PEA
Clitch™ Cable HitchHookedtoasupportneartheworkarea,theClitch™freesthewelderfromthecableweight.Itallowsthecabletobepulledthroughbutwillnotletitslipback.• Madetofitcablesize: -AWG#2(25mm2)throughAWG4/0(105mm2)or -5/8"(16mm)through7/8"(22mm)indiameter.• 10percarton.Part No. CH-240
Part No. UPC No. 0 27719Cable CapacityAWG mm2
CH-240 001555 2-4/0 25-105
Chipping Hammers / Cable Cutters / Cable Hitch
Weld-Cleaning Tools (Chipping Hammers)• Completelineofweld-cleaningtools-
eachtooldesignedforspecialapplication.
• Manufacturedunderarigidqualityandsafetycontrolprogram.
• Hammerheadsarehardenedtopreciselycontrolledtemperaturesfordurabilityandstrength.
• Wide-bladedesignremovesslagfasterandaddstothelifeofthetool.
• Dropforged,heat-treated,hardenedheadwithstandsmoregrinds.
• Long,slenderconesassureeasyslagremoval.
• Welded-on-headtosteelshaft-preventsheadfromcomingloose.
• Well-balancedhandlegripforcomfortandease-of-use.
• 10percarton.
000H 7002 000A 00AW WH-20 WH-30
Part No. UPC No. 0 27719 Description
Length WeightInches mm oz. grams
0H-E Coneandchisel,coilhandleeconomymodel 12 290 14 397000H 010069 Coneandchisel,coilhandleheavyduty 11 280 16 440G-E-BULK Coneandcrosschisel,coilhandle,economy 11 280 15 415000G 010113 Coneandcrosschisel,coilhandle 11 280 15 415000J 010168 Coneandchisel,woodenhandle 11 280 13 3657002 010212 Coneandchisel,softgriphandle 11 280 14 397000A 010267 Brushandchisel,brushlockingthumbscrew 11 280 17 48000AW 012223 Brushandchisel,woodenhandle 12 275 17 480WH-10 006901 Chiselandcrosschisel,woodenhandle 12 275 16 440WH-20 010311 Coneandchisel,woodenhandle 13 325 23 650WH-30 010366 Coneandcrosschisel,woodenhandle 13 325 23 650WH-40 010410 Curvedconeandcurvedchisel,woodenhandle 13 325 24 680
WH-40
Chipping Hammer Replacement PartsPart No. UPC No. 0 27719 Description
CH-315 012674 Wirebrush
00WH 012629 Woodenhandle
Part No. 00WHPart No. CH-315
Part Nos. WH-10
Building ConstructionHigh Rise Ship Construction Television Towers Electrical Towers
www.middlesexgases.com
568
11
Mar
king
and
Lay
out T
ools
PearsonVendor Code: PEA
White-Line™ Soapstone and Soapstone Holders# 1 Select, Natural Grade• Thefinestqualitysoapstoneavailableintheworld.• Allwhitetextureforexcellentmarkingquality.• Graincuttoensuregoodstrengthandlong
servicelife.• Markswillnotcontaminateweldsandare
easilyremoved.• Lowwatercontentforincreasedhardnessand
resistancetobreakage.
Soapstone HoldersAll holders come with our #1 select soapstone• Stainlesssteelbody,aluminumknob.• Steelnutholds#1selectsoapstonefirmly.• Comeswithpocketclip.
Part No. UPC No. 0 27719 Description UM Ctn.
NS-16 013107 Flatsoapstone,bulk 144pcs./pack 12/288WL-F5-6 005270 Flatsoapstone 6pcs./card 10WL-512 014302 Flatsoapstoneholder 1percard 1WL-512-B Flatsoapstoneholder,bulk casepack 100NS-16A 013114 Roundsoapstone,bulk 144pcs./pack 12/432WL-R5-10 005324 Roundsoapstone 10pcs./card 10WL-514 014319 Roundsoapstoneholder 1percard 1WL-514-B Roundsoapstoneholder,bulk casepack 100NS-16B 013121 Squaresoapstone,bulk 144pcs./pack 12/432WL-S5-10 005379 Squaresoapstone 10pcs./card 10WL-516 013435 Squaresoapstoneholder 1percard 1WL-T5 005331 Thinlinesoapstone,bulk,1/16 144pcs./pack 12/432WL-T5-10 005386 Thinlinesoapstone,1/16 10pcs./card 10WL-518 005287 Thinlinesoapstoneholder,1/16 1percard 1
WL-T5
WL-518
WL-S5
WL-516
WL-R5
WL-514
WL-F5
WL-512
Part Nos.
Part Nos.
Soapstone / Pocket Scribe / Pencils
Pocket Scribe• Lightweight,yetstrongaluminumhandle.• Sharptungstencarbidetipcutsintohardsurfaces,
leavesclearmarksonmetal,glass,plastic,toolsetc.• Comeswithprotectivetipcover-protectsagainst
damagedpoints,tornclothandpuncturedfingers.• Handypocketclip.• 10percarton.Part No. ES-4(UPCNo.027719014388)
www.middlesexgases.com
667
13
Eye, Face, and Head Protection
Eclipse™ Welding Helmets• Exclusive design: contemporary profile and narrow
shell design engineered to maximize performance and enable welders to work more efficiently and comfortably with increased productivity.
• Safe to use: extended head, face, neck and ear coverage protects against sparks and slag - preventing burns and harmful ultra-violet and infra-red rays.
• Lightweight: reduces stress on welder’s neck and back muscles.
• Streamlined design: allows you to work in tight space. Easy, adjustable knobs, even with the gloves on.
• Strong and durable: withstands heavy on-the-job abuse.• Non-reflective surface: absorbs stray radiation and
avoids arc flash.• Ergonomically engineered: scientifically balanced
for easy “nod down.”• Excellent ventilation: channels smoke and fumes away
from the welder. Makes breathing easier and a unique shape that allows room for respirators.
• Unique magnifier lens holder: built-in magnifier holder is adjustable to multiple positions.
• Adaptable: to most auto-darkening filters.• Helmet includes shade 10 filter plate, safety
plate (standard size) and adjustable locking ratchet headgear with sweatband.
• Meets or exceeds ANSI Z87.1 & CE standards.
Part No. DescriptionPassive
EAD-24F 2" X 4-1/4" fixed shade 10
EAD-54F 4-1/2" x 5-1/4" fixed shade 10
ADF-24F 2" X 4-1/4" fixed shade 10
ADF-54F 4-1/2" x 5-1/4" fixed shade 10Auto-Darkening
EH-24F* 2" X 4-1/4" fixed front, fixed shade 10
EH-24L* 2" X 4-1/4" lift front, fixed shade 10
EH-54F* 4-1/2" x 5-1/4" fixed front, fixed shade 10Headgear
OERH* Adjustable ratchet headgear
Lift/Fixed-Front Combo Welding Helmets• New innovative design- single model acts as a lift
or a fixed front.• High performance, super tough and economical.• Tougher and lighter than ordinary helmets -
flexible and durable shell.• Streamlined, compact design allows welders to
get into tight places.• Features innovative integral lens holder.• Excellent resistance to welding spatter.• Pivot tabs relieve pressure on temples.• Adjustable tension for up and down shell movement
without removing helmet.• Ratchet adjustable headgear is soft and comfortable
with foam fitting vinyl sweatband.• Meets/exceeds ANSI Z87.1, CSA Z94.3, CE and
various international standards.
Part No. UPC No. 0 27719 Description Ctn
NS-24BF* 00202 6 Fixed front welding helmet, 2" x 4-1/4", economy, black 1
NS-24B* 02890 3 Lift/fixed front combo, welding helmet, 2" x 4-1/4", black 1
NS-45BF* 00396 2 Fixed front welding helmet, 4-1/2" x 5-1/4", economy, black 1
NS-45B* 02893 4 Lift/fixed front combo, welding helmet, 4-1/2" x 5-1/4", black 1
HS-24 00197 5 Hand held welding shield, 2" x 4-1/4" shade 10 10
RC-24 02899 6 Replacement flip-up lens cartridge, for 2" x 4-1/4" helmet 10
RC-45 02900 9 Replacement flip-up lens cartridge, or 4-1/2" x 5-1/4" helmet 10
00RH 02898 9 Adjustable ratchet headgear for helmet 10
Part No. NS-24BF
Part No. NS-45B
Welding Helmets
Part No. EH-24L
*Also available in bulk.
*Also available in bulk.
Part No. ADF-54F
Part No. HS-24
PearsonVender Code: PEA
www.middlesexgases.com