magnetic accessories - maanterä oy · the magnetic filter micromag provides for enormous...
TRANSCRIPT
Magnetic AccessoriesFor individual application
ASSFALG Magnetic accessories for work-relieve,
increased safety with every day work for lifting, transporting
and separating of sheet-metal, filtration and demagnetization purposes.
Individual
Work-relieving
Economical
The ACE for metal
01
Assfalg GmbH
Buchstrasse 149 D-73525 Schwäbisch GmündGermany
Phone +49 71 71.92 505-0Fax +49 71 71.92 505-50
The right of changes and deviating pictures is reserved. Liability is excluded.
Design and production: Hela Werbung GmbH | www.hela.com
Demagnetizing platesEntmag-P
Tunnel demagnetizersEntmag T
13
14
02
Filtering | Lifting | Expanding | Demagnetizing | Mini magnets
Magnetic filter Micromag03
Filter barsManual sorting magnet HSM
04
Electromagnetsfor automation
05
and hand-held magnetic pick-up
06
Sheet-metal separating magnets07
V-prisms08
Clamping magnets MSB09
Switchable clamping mag-nets SBM
10
Segmented support modules11
15Mini magnets
03
Magnetic filters Micromag
Applications
˭ Grinding, honing and lapping machines
˭ CNC-machines
˭ Fine-finishing machines
˭ Electric discharge machines
˭ Laser cutting machines
˭ Building and industrial heating systems
˭ Pump protection
The magnetic filter Micromag provides for enormous filtration capacity with
liquids, in particular with lubricating coolants.
Magnetic particles down to 0.2 µm are filtered out by the permanent mag-
netic core. Sporadically appearing and non-magnetic parts are filtered out by
means of the coagulation as well.
The filter can be easily incorporated in the coolant circuit through pipe
threads.
Features
ˠ Huge filtration capacity ˠ Easy and fast cleaning ˠ Temperature range: +5°C to +50°C ˠ Maximum operating pressure: 12 bar Special designs from 0 - 80 bar are possible.
ˠ No extra costs - no additional disposal of filter media.
Advantages
ˠ Improved drilling, grinding and electric discharge results
ˠ Longer lifetime of liquids ˠ Prolonged lifetime of tools ˠ Shorter maintenance and down times
Technical data Flow rate ø x lengthMax. Dirt vol-
ume Thread Weight Item no.
[l/min] [mm] [kg] [inch “] [kg]
Micromag MM5 70 80 x 125 1 1 2.5 46266
Micromag MM10 100 90 x 250 2 1 4.0 12514
Micromag MM20 150 90 x 500 4 1.5 8.0 45646
04
Magnetic filter bar EGMManual sorting magnet HSM
Applications
Magnetic filter bar:
˭ For cleaning of fluids
Manual sorting magnet
˭ For holding of small parts
Features
Magnetic filter bar: ˠ Cost-effective Extremely high adhe-sive forces with Neodymium-Iron-Bo-ron-magnets
ˠ Low profile ˠ Very cost-effective permanent magnet filter for occasional impurities
Manual sorting magnet: ˠ Cost-effective ˠ Longevity ˠ Light-weight and compact design
Technical data ø x lengthRecommended lifting
force Weight Item no.
Magnetic filter bar [mm] [kg]
EGM-20 25x195* For small parts only 0.5 48540
Technical data Supporting surface Overall height Weight Item no.
Sorting magnet [mm] [mm] [kg]
HSM 188x105 130 1,7 64760
HSM ECO 155x135 205 2,6 21899
*Additional sizes on request
The magnetic filter bar EGM is used for extracting not only ferrous impurities
from bulk material, plastic granulates, grain, corn, flour, food etc., but also
for attracting of fluid materials.
The manual sorting magnet is preferably used for separating of bulk material
and lifting of small parts such as bolts, nuts, nails or chips.
HSM ECO
HSM
EGM
05
Electric adhesive magnetsfor automation
Applications
˭ For holding & loosening of ferro-magnetic work pieces
˭ In production, fixture and spe-cial-purpose machine building as well as automation and safety technology
˭ For fully and semi-automatic manipulating and conveying equipment
These electric adhesive magnets are used for specific and electrically
controllable holding / loosening of loads in manipulating and convey-
ing equipment.
The adhesive magnets are available in 2 versions:
- Holding (H): Electric adhesive magnets that start magnetising and
work holding only when energy is fed.
- Loosening (L): For tis purpose, permanent adhesive magnets are
used that release workpieces only when energy is fed.
Features
ˠ The holding force obtainable with low voltage 12V & 24V d.c or 240V a.c.
ˠ depends on both material thickness and surface finish (air gap).
ˠ Compact design
Technical data Diameter Height
Adhesive force Voltage
Power consump-
tion Weight Type
Holding current [mm] [mm] [N] [V] [W] [kg]
M521-72 H 25 20 113 12 2.16 0.07 A
M521-72 H 25 20 113 24 2.16 0.07 A
M521-73 H 30 24 253 12 3.36 0.11 A
M521-73 H 30 24 253 24 3.36 0.11 A
M521-74 H 40 27 575 12 5.5 0.21 B
M521-74 H 40 27 575 24 5.5 0.21 B
M521-75 H 50 30 1097 12 5.7 0.36 B
M521-75 H 50 30 1097 24 5.7 0.36 B
M521-75 H 50 30 1097 240 8.56 0.41 C
M521-76 H 65 35 1677 12 8.2 0.71 B
M521-76 H 65 35 1677 24 8.2 0.71 B
M521-76 H 65 35 1677 240 10.7 0.74 C
Loosening current
M521-77 L 35 48 285 24 5.5 0.35 D
M521-77 L 35 48 285 240 5.5 0.35 C
M521-78 L 50 63 471 24 8.5 0.87 D
M521-78 L 50 63 471 240 8.5 0.88 C
Type A: With strand, 500 mm long
Type B: 2-pin clamp ter-minal
Types C + D: Hirschmann connector with rectifier (C) without rectifier (D)
0606
These devices enable securely picking-up curved work pieces, and placing
them in presses as well as punching tools and unloading them, then.
The hands remain outside the hazard zone - accidents are
avoided.
Pick-and-place gripper &Manual pick-up magnet
Applications
˭ For secure lifting and transport-ing of sheet-metal, flame-cut parts as well as sharp-edged and greasy work pieces.
Features
Generals ˠ Maximum safety due to permanent magnets
ˠ Heat-resistant up to 80°C ˠ Easy loosening by mechanical ejector or leverage ELM
ELM 100-H ˠ Picking-up of checker plates is
possible.
Technical dataAdhesive area /
length Lifting force Towing forceSheet-metal
thickness Weight Item no.
[mm] [kg] [kg] [mm] [kg]
Helios 335 19 / 235 2 - > 0.3 0.3 335
Helios 336 25 / 235 3 - > 0.3 0.4 336
PM 1 65 x 300 5 - > 0.3 0.4 342
HM 1 58 x 30 5 7 > 0.3 0.2 98
HCM 2 90 x 50 20 6 > 0.5 1.0 20057
ELM 100-H 84 x 60 100 40 > 15/10 3.0 45019
HCM2
ELM 100-HHeliosPM1HM1
Technical data Diameter Height
Adhesive force Voltage
Power consump-
tion Weight Type
Holding current [mm] [mm] [N] [V] [W] [kg]
M521-72 H 25 20 113 12 2.16 0.07 A
M521-72 H 25 20 113 24 2.16 0.07 A
M521-73 H 30 24 253 12 3.36 0.11 A
M521-73 H 30 24 253 24 3.36 0.11 A
M521-74 H 40 27 575 12 5.5 0.21 B
M521-74 H 40 27 575 24 5.5 0.21 B
M521-75 H 50 30 1097 12 5.7 0.36 B
M521-75 H 50 30 1097 24 5.7 0.36 B
M521-75 H 50 30 1097 240 8.56 0.41 C
M521-76 H 65 35 1677 12 8.2 0.71 B
M521-76 H 65 35 1677 24 8.2 0.71 B
M521-76 H 65 35 1677 240 10.7 0.74 C
Loosening current
M521-77 L 35 48 285 24 5.5 0.35 D
M521-77 L 35 48 285 240 5.5 0.35 C
M521-78 L 50 63 471 24 8.5 0.87 D
M521-78 L 50 63 471 240 8.5 0.88 C
07
Sheet-metal separating permanent magnets
Applications
˭ De-stacking / separating of stacked sheet-metal plates
˭ Ideal for extracting ferrous impu-rities from bulk material
Features
ˠ Large penetration depth ˠ Good air gap bridging
Technical data Dimensions Number of threads Item no.
[mm]
92.07.073 75 x 73 x 28 2 122
92.10.103 104 x 103 x 28 2 123
92.13.105 143 x 104 x 49 2 124
92.26.105 277 x 104 x 49 2 126
92.30.105 310 x 104 x 49 2 127
92.35.105 344 x 104 x 49 2 128
92.40.105 411 x 104 x 49 3 129
92.45.105 444 x 104 x 49 3 12692
92.50.105 511 x 104 x 49 3 130
PSC 210 Nd 210 x 155 x 50 2 12689
PSC 220 220 x 183 x 77 2 42568
PSC 270 270 x 183 x 77 2 42569
PSC 310 Nd 310 x 154 x 47 2 51403
PSC 320 320 x 183 x 77 2 42570
PSC 420 420 x 183 x 77 3 42577
These separating magnets part stacked sheet-metal plates by permanent
magnetic force. Each sheet plate can be picked up as single part by hand,
lifting magnet or vacuum lifter.
08
Magnetic prisms
Applications
˭ For holding of cylindrical and complex work pieces
˭ Ideal for grinding and electric discharge machining tasks.
The V-shape magnetic prisms are employed for grinding
and electric discharge jobs as well as useful helpers in
metrology rooms when round and complex work pieces
are to be safety and precisely clamped.
Features
ˠ Four magnetic clamping surfaces (up-per, lower and lateral surfaces)
ˠ Switchable on and off ˠ Can be rapidly and easily placed. ˠ Also deliverable as match-ground in pairs
Technical data Dimensions (L x W x H) max ø min ø Tolerance Weight Item no.
[mm] [mm] [mm] [µm] [kg]
PMP75 (Pair) 75x75x56 40 5 5 1.79 62672
PMP100 (Pair) 100x95x70 65 5 5 3.96 62673
E934 101.6 x 70 x 95.5 65 22 25 1.98 319
E934 (Pair) 101.6 x 70 x 95.5 65 22 25 1.98 18749
E933A 120 x 70 x 95 65 22 10 4.4 62130
E933A (Pair) 120 x 70 x 95 65 22 10 4.4 62963
Technical data Dimensions Number of threads Item no.
[mm]
92.07.073 75 x 73 x 28 2 122
92.10.103 104 x 103 x 28 2 123
92.13.105 143 x 104 x 49 2 124
92.26.105 277 x 104 x 49 2 126
92.30.105 310 x 104 x 49 2 127
92.35.105 344 x 104 x 49 2 128
92.40.105 411 x 104 x 49 3 129
92.45.105 444 x 104 x 49 3 12692
92.50.105 511 x 104 x 49 3 130
PSC 210 Nd 210 x 155 x 50 2 12689
PSC 220 220 x 183 x 77 2 42568
PSC 270 270 x 183 x 77 2 42569
PSC 310 Nd 310 x 154 x 47 2 51403
PSC 320 320 x 183 x 77 2 42570
PSC 420 420 x 183 x 77 3 42577
PMP100
PMP75
E934
09
Permanent clamping magnets
Applications
˭ For clamping of shaped parts
˭ For grinding of cemented carbide (type SmCo)
Features
ˠ Permanently magnetic ˠ Not switchable ˠ Mechanically machineable
Technical data Dimensions (L x W x H) Magnetic adhesive areas Item no.
[mm]
MSB 100x100x50 1 x 100x100 mm 314
MSB 100x50x50 2 x 100x50 mm 315
MSB 100x25x25 2 x 100x25 mm 316
For grinding of cemented carbide
MSB...SmCo 100x100x50 2 x 100x50 mm 33477
MSB...SmCo 100x50x50 1 x 100x50 mm 33478
MSB...SmCo 100x25x25 2 x 100x25 mm 33479
The permanent clamping magnets MSB are used for
clamping of shaped parts and grinding of cemented
carbide.
MSB
MSB
10
Clamping magnets
Applications
˭ Ideal for grinding and electric discharge machining, measuring and testing jobs
˭ Small magnetic workpieces from 0.5 mm can be clamped.
The clamping magnets SPM belong to useful accessories for
clamping of small parts.
Features
ˠ Magnetizable on all four longitudinal sides (SPM 2 L, SPM 2)
ˠ Short payback period ˠ Universally applicable ˠ Absolutely water-proof ˠ Switchable on and off by pivoted lever ˠ All four sides are regrindable (SPM 2 L, SPM 2)
Technical data Dimensions (L x W x H) Adhesive force Weight Item no.
[mm] [N/cm²] [kg]
SPM 2 175x64x64 80 3.2 309
SPM 2 L 195x64x64 80 3.8 28983
Non-corrosive
SPM2 NiRo 175x64x64 50 3.2 28984
SPM 2 L NiRo 195x64x64 50 3.8 51915
SPM Eco 3 magnetic adhesive areas 150x70x85 50 5 63363
SPM 2 L
SPM 2
SPM Eco
11
Segmented support modules
Applications
˭ The magnetic contact surface area between work piece and magnetic clamping plate can be enlarged with non-machined and machined segmented support modules.
Features
ˠ The modules can be individually tai-lored to the work requirements.
ˠ Match-ground in pairs ˠ Can be used both horizontally and vertically.
Technical data Dimensions (L x W x H) Pole alignment Item no.
[mm]
950 (Pair) 60 x 75 x 30 longitudinal 62135
950 (Pair) 50 x 100 x 40 longitudinal 62136
EHT-100 100 x 70 x 40 transverse
EHT-150 150 x 75 x 25 transverse
EHT-300 300 x 75 x 25 transverse
Pole block Different sizeslongitudinal + trans-
verse
*Additional sizes on request
The segmented support modules effect as pole exten-
sion with magnetic clamping plates. Due to the ma-
chined shapes, complex work pieces can be magnetically
clamped. Various working heights can be built-up as
well.950
950vEHT-150Set of segmented support modules
12
All the ferrous and ferromagnetic materials are able forming magnetic zones due to, for example, raw material stor-
age, magnetic crack and hardness tests, cold forming, chip cutting, magnetic clamping, lifting and measuring.
Basically, magnetism is not harmful, but may prove interfering with further processing.
Hand, plate and tunnel demagnetizers are available.
Why demagnetizing?
Introduction of demagnetizing
Hand demagnetizer Plate demagnetizer Tunnel demagnetizer
.
While demagnetizing, the magnetic field in the workpiece gets neutralised. The work piece is magnetically neutral.
The demagnetizing effect can be obtained by intense heating or a very strong external magnetic field. After de-
magnetization, the magnetic forces in the workpiece have disappeared. The magnetic field can be restored through
remagnetization.
Demagnetizing
Magnetized in
external mag-netic field
Demagne-tized by:
-Heat -Vibration -Magnetic counterfield
Non-magnetized magnetized demagnetized
13 13
Demagnetizing plateENTMAG-PENTMAG demagentizing plates are a simple and cost-effective solu-
tion for the demagnetization of single and series parts of small and
medium size. The devices demagnetize up to a maximum distance of
60 mm. The work pieces are demagnetized either as single units fed
by hand or conveyor. Clusters are to be avoided.
Features
ˠ Robust, humidity-proof design (V2A-case). ˠ Suitable for work pieces made of soft and medium-hard material. High-grade hard-ened, intricate parts are recommended to be tried out before.
ˠ All operating voltages at 50Hz or 60Hz are deliverable (lower frequency or pulse recur-rence frequency for problematic cases).
ˠ Connecting line, 2 m long, with plug connector. ˠ Type 17 designed for incorporation in belt conveyors (flow-line production). ˠ Conveying rate for demagnetizing <0.5 m/s ˠ Demagnetization can penetrate deeper than 0.5 mT (5 Gauss). Test: Iron filings must not adhere on the work piece.
Technical data Active area [mm] Dimensions [mm] Weight Volt ED Item no.
NB x C A B H [kg] [V] [%]
P 17.1 225 x 180 260 244 180 20 400 100 64408
P 17.2 355 x 190 396 380 190 34 400 80
P 17.3 425 x 190 466 450 190 41 400 80
EDH 123 123 x 83 123 83 83 1.8 230 50 42161
EDS 200 200 x 150 200 150 100 8.5 230 100 42176
Applications
˭ Neutralization of interfering residual magnetism.
˭ Demagnetizing is terminated af-ter leaving the plate at a distance of appr. 300 mm.
EDH 123
EDS 200
1414
Tunnel demagne-tizer ENTMAG-TENTMAG-T tunnel demagnetizers enable simple and fast demagnetization
of ferromagnetic small and large-number parts. The work piece is moved
through the inner space of the tunnel by hand, chute or free fall. Demagne-
tizing is terminated only after leaving the plate at a distance of appr. 300
mm. The work pieces are recommended to be demagnetized one by one.
Clusters are to be avoided.
Features
ˠ Robust, humidity-proof design ˠ Type 163: Suitable for work pieces made of soft material. Type 164: Suitable for work pieces made of medium hard material. Special: High-grade hardened, intricate parts are recommended to be tried out before.
ˠ All operating voltages at 50Hz or 60Hz are deliverable (lower frequency or pulse recur-rence frequency for problematic cases).
ˠ All effective widths NB are deliverable from 150 to 800 mm. ˠ Demagnetization can penetrate deeper than 0.5 mT (5 Gauss). Test: Iron filings must not adhere on the work piece.
Applications
˭ Preferred for demagnetization of small and large-number parts.
˭ The penetration depth into the work piece amounts to appr. 6 mm. The layer thickness with large-number parts must not exceed 6 mm.
Technical data Dimensions [mm] Weight Item no.
H NB L A B [kg]
T 163 100 200 140 300 190 16 64153
T 163 100 400 140 500 190 24
T 163 150 400 190 500 240 34 64181
T 164 100 200 140 320 210 29
T 164 100 400 140 520 210 45 62592
T 164 150 400 190 520 260 59 65157
15
Technical data Dimensions [mm]
Adhesive force [N] Weight [g] Item no.
D H A
Type 001 AlNiCo 6 10 2 2 2 208
8 12 3 4 4 209
h6 10 16 6 8.5 9 210
13 18 6 12 17 211
16 20 6 20 29 212
20 25 5 40 57 213
25 30 7 60 110 214
32 35 4 160 200 215
40 45 5 240 420 216
50 50 - 400 720 217
Type 100 AlNiCo 6 20 12 2 4.5 2188 20 11 4 7.5 219
without fit 10 20 10 8.5 12 220
tolerance 13 20 8 12 19 221
16 20 6 20 30 222
20 25 5 40 57 223
25 35 13 60 125 224
32 40 9 160 220 225
40 50 10 240 440 226
50 60 10 400 813 227
Cylindrical gripper magnets made from magnetic steel, with galvanized case
Cylindrical gripper magnets
Applications
˭ 001 AlNiCo: Material: AlNiCo fit tolerance h6, max. admissible temperature 450° C
˭ 100 AlNiCo: Material: AlNiCo without fit tolerance, max. ad-missible temperature 450° C
16
Technical data Dimensions [mm]
Adhesive force [N] Weight [g] Item no.
D H A
Type 600 Co 6 20 10 8 4.5 265
h6 8 20 10 22 8 266
10 20 8 40 12 267
13 20 6 60 20 268
16 20 2 125 30 269
20 25 5 250 60 270
25 35 7 400 135 2582
32 40 4.5 600 250 272
Type 600 Nd 6 20 10 10 4.5 26232
h6 8 20 10 25 8 2623310 20 8 45 12 26234
13 20 6 70 20 26235
16 20 2 150 30 26236
20 25 5 280 59 26237
25 35 7 450 132 26238
32 40 4.5 700 246 26239
Cylindrical gripper magnets made of high-energy magnetic material
Cylindrical gripper magnets
Applications
˭ 600 Co: Material Cobalt-Sa-marium; fit tolerance h6; max. admissible temperature 200°C; brass case
˭ 100 Ne: Material Neodymium; fit tolerance h6; max. admissible temperature 80°C; brass case
600 Co 600 Nd
17
Technical data Dimensions [mm] Thread
Adhesive force [N] Weight [g] Item no.
D H L d
500 Fe 10 4.5 11.5 6 M3 4 3 249
13 4.5 11.5 6 M3 10 4 250
16 4.5 11.5 6 M3 18 6 251
20 6.0 13.0 6 M3 30 11 252
25 7.0 15.0 8 M4 40 20 253
32 7.0 15.0 8 M4 80 32 254
40 8.0 18.0 10 M5 125 60 255
50 10.0 22.0 12 M6 220 110 256
63 14.0 30.0 15 M8 350 240 257
80 18.0 34.0 20 M10 600 500 258
100 22.0 43.0 22 M12 900 940 259
125 26.0 50.0 25 M14 1300 1700 260
500 Co 6 4.5 11.5 6 M3 5 2 26199
8 4.5 11.5 6 M3 11 3 26200
10 4.5 11.5 6 M3 20 4 26201
13 4.5 11.5 6 M3 40 6 26202
16 4.5 11.5 6 M4 60 7 26203
20 6.0 13.0 8 M4 90 16 26204
25 7.0 14.0 8 M4 150 28 26205
32 7.0 15.5 10 M5 220 47 26206
500 Nd 6 4.5 11.5 6 M3 5 2 26183
8 4.5 11.5 6 M3 13 3 26184
10 4.5 11.5 6 M3 25 4 26185
13 4.5 11.5 6 M3 60 5 26186
16 4.5 11.5 6 M4 95 7 26187
20 6.0 13.0 8 M4 140 16 26188
25 7.0 14.0 8 M4 200 27 26189
32 7.0 15.5 10 M5 350 45 26190
Applications
˭ 500 Fe: Material Ferrit; max. admissible temperature 200°C
˭ 500 Co: Material cobalt-samari-um; max. admissible temperature 200°C
˭ 500 Ne: Material Neodymium; max. admissible temperature 80°C;
Flat gripper magnet with galvanized case, with threaded bush.
with threaded bush
Flat gripper magnets
500 Fe 500 Co 500 Nd
18
Technical data Dimensions [mm] Thread
Adhesive force [N] Weight [g] Item no.
D H L d
500 Fe 10 4.5 11.5 6 M3 4 3 249
13 4.5 11.5 6 M3 10 4 250
16 4.5 11.5 6 M3 18 6 251
20 6.0 13.0 6 M3 30 11 252
25 7.0 15.0 8 M4 40 20 253
32 7.0 15.0 8 M4 80 32 254
40 8.0 18.0 10 M5 125 60 255
50 10.0 22.0 12 M6 220 110 256
63 14.0 30.0 15 M8 350 240 257
80 18.0 34.0 20 M10 600 500 258
100 22.0 43.0 22 M12 900 940 259
125 26.0 50.0 25 M14 1300 1700 260
500 Co 6 4.5 11.5 6 M3 5 2 26199
8 4.5 11.5 6 M3 11 3 26200
10 4.5 11.5 6 M3 20 4 26201
13 4.5 11.5 6 M3 40 6 26202
16 4.5 11.5 6 M4 60 7 26203
20 6.0 13.0 8 M4 90 16 26204
25 7.0 14.0 8 M4 150 28 26205
32 7.0 15.5 10 M5 220 47 26206
500 Nd 6 4.5 11.5 6 M3 5 2 26183
8 4.5 11.5 6 M3 13 3 26184
10 4.5 11.5 6 M3 25 4 26185
13 4.5 11.5 6 M3 60 5 26186
16 4.5 11.5 6 M4 95 7 26187
20 6.0 13.0 8 M4 140 16 26188
25 7.0 14.0 8 M4 200 27 26189
32 7.0 15.5 10 M5 350 45 26190
Technical data Dimensions [mm]
Adhesive force [N] Weight [g] Item no.
D H
500 Fe 10 4.5 4 2 238
13 4.5 10 3 239
16 4.5 18 5 240
20 6.0 30 10 241
25 7.0 40 18 242
32 7.0 80 29 243
40 8.0 125 55 244
50 10.0 220 102 245
63 14.0 350 226 246
80 18.0 600 468 247
100 22.0 900 915 9601
125 26.0 1300 1680 35
500 Co 6 4.5 5 1 26191
8 4.5 11 2 26192
10 4.5 20 3 26193
13 4.5 40 4 26194
16 4.5 60 7 26195
20 6.0 90 14 26196
25 7.0 150 26 26197
32 7.0 220 42 26198
500 Nd 6 4.5 5 1 26169
8 4.5 13 2 26170
10 4.5 25 2.5 26171
13 4.5 60 4 26172
16 4.5 95 6 26179
20 6.0 140 14 26180
25 7.0 200 25 26181
32 7.0 350 41 26182
Applications
˭ 500 Fe: Material Ferrit; max. admissible temperature 200°C
˭ 500 Co: Material cobalt-samari-um; max. admissible temperature 200°C
˭ 500 Ne: Material Neodymium; max. admissible temperature 80°C;
Flat gripper magnet with galvanized case, without threaded bush.
without threaded bush
Flat gripper magnets
500 Fe 500 Co 500 Nd
19
Type 700 Fe Dimensions [mm] Adhesive force
[N] Weight [g] Item no.
D H d1 d2
with countersink 16 4.5 3.5 6.5 14 4 2250420 6.0 4.2 9.4 27 9 22505
25 7.0 5.5 11.5 36 16 22506
32 7.0 5.5 11.5 72 27 11799
40 8.0 5.5 11.5 90 53 15091
with cylindrical bore 50 10.0 8.5 22 180 90 22494
63 14.0 6.5 24 290 195 22490
80 18.0 6.5 11.5 540 478 22493
Type 200 Fe Dimensions [mm] ThreadAdhesive force
[N] Weight [g] Item no.
D H K
with internal thread 50 10 12.0 M 6 170 170 3388863 14 13.0 M 8 290 206 33887
80 18 14.5 M 8 550 472 33886
80 18 14.5 M 10 550 466 33788
Flat adhesive magnet made from magnetic steel, with galvanized case
Flat gripper magnets
Applications
˭ 200 Fe: Material Ferrit; max. admissible temperature 200°C
˭ 700 Fe: Material Ferrit; max. ad-missible temperature 200°C
200 Fe 700 Fe with countersink 700 Fe with cylindrical bore
with internal thread / with countersink / with cylindrical bore
20
Type DMAG Dimensions [mm] ThreadAdhesive force
[N] Weight [g] Item no.
D
with hook 25 M 4 40 23 4121332 M 4 80 34 41214
40 M 4 125 59 41215
50 M 4 220 107 41216
Type 200 Fe Dimensions [mm] ThreadAdhesive force
[N] Weight [g] Item no.
D H L
with stud 10 4.5 7 M 3 4 2 22498bolt 13 4.5 7 M 3 10 3 22499
16 4.5 7 M 3 20 5 22500
20 6.0 7 M 3 30 10 22501
25 7.0 8 M 4 40 19 22502
32 7.0 8 M 4 80 30 22503
Flat adhesive magnet made from magnetic steel, painted / galvanized case
Flat gripper magnets
Applications
˭ DMAG: Material Ferrit; max. admissible temperature 200°C, with hook
˭ 20 Fe: Material Ferrit; max. ad-missible temperature 200°C, with stud bolt
DMAG 200 Fe
with hook / with stud bolt
21
Type OMAG Dimensions [mm] yellow red green blue black white
D
25 275 277 278 279 273 27429 282 284 285 286 17016 28135 293 295 296 297 53188 53189
Type GMAG Dimensions [mm] SurfaceAdhesive force
[N] Weight [g] Item no.
D H
12 16.0 nickel-plated 55 7 3649025 22.0 white painted 40 25 26175
32 22.0 white painted 80 35 26176
36 29.5 white painted 100 45 26177
40 29.5 white painted 125 62 26178
Magnetic clamps
Applications
˭ OMAG:Material Ferrit, plas-tic-coated
˭ GMAG:Material Ferrit, white painted
GMAGOMAG
22
Technical data Dimensions [mm]
Bore / thread [mm}
Adhesive force [N] Weight [g] Item no.
D H d/M
Button magnets 13 10 4.2 7 7 18019 13 5.4 19 20 18125 16 5.4 29 56 182
32 25 7 66 133 183
Pot magnets 19 8 3.5 30 18 18429 9 5 55 46 18538 10.5 5 95 97 186
17 16 M 6 18 26 188
21 19 M 6 28 50 189
27 25 M 6 65 110 190
35 30 M 6 120 215 191
Technical data Dimensions [mm]
Adhesive force [N] Weight [g] Item no.
Total L P B H
U-magnets 31 8 15 20 20 45 65 17340 10 20 25 25 90 150 17444 11 22 29 30 120 220 175
57 11 35 35.5 35 230 380 176
71 15 41 57 41 320 1600 177
78 15 48 82 54.5 470 2000 178
Button, potU-magnets
Applications
˭ Button magnets, through bore, divided adhesive area, material AlNiCo; max. admissible tem-perature 450°C
˭ Pot magnets Material: AlNiCo with thread; max. admissible temperature 450°C
˭ U-magnets: Material AlNiCo; max. temperature 450°C
U-magnet
Pot magnet
Button magnet
Would you like to knoW more?We will be happy to advise you. By phone or in a personal meeting.
r T +49 71 71.92 505-0 r [email protected]
SU
BjE
CT
To T
ECH
NIC
Al
CHA
NG
ES
· 04
.20
16
Assfalg GmbH
Buchstrasse 149
D-73525 Schwäbisch Gmünd
Germany
Phone +49 71 71.92 505-0
Fax +49 71 71.92 505-50
www.assfalg-metal.com
The ACE for metal