magnetic stirrers laboratory stirrers - 3.imimg.commagnetic stirrers laboratory stirrers magnetic...
TRANSCRIPT
Max. stirring capacity (Water)[Liters]
Motor rating input [W]
Motor rating output [ W]
Speed range [rpm]
Speed display
Max. torque [Ncm]
Torque display
Motor Overload protection
Chuck Ø [mm]
Stirring Shaft Ø x length (mm)
Dimensions [W x H x D] (mm)
Weight [kg]
Power [W]
Protection class acc. to DIN/EN 60529
Technical Data
RQ - 40 Plus
40
120
100
50-2200
LCD
60
LCD
LED light flash, auto stop
13
14 x 220
83 x 220 x 186
2.4
130
IP 42
RQ - 20 Plus
20
60
50
50-2200
LCD
40
LCD
LED light flash, auto stop
13
14 x 220
83 x 220 x 186
2.4
70
IP 42
Supply 220/240 Volts, 50 Hz
Magnetic StirrersLaboratory Stirrers
Magnetic StirrersLaboratory Stirrers
Magnetic StirrersLaboratory Stirrers
Magnetic StirrersLaboratory Stirrers
Laboratory Stirrers - Direct Drive
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
REMI presents the next generation of laboratory stirrers for stirring / mixing etc. of chemical, pharmaceutical, food and cosmetic products. The equipment basically consists of body, chuck, stainless steel blade propeller and a U-type stand.
Safety
Performance
Leading Technology
User Friendly
Motor protection in case of continuous overload
Stopper for protection of vessel & shaft
Special base design for topple free operation
Protection class acc. to DIN/EN 60529
2 models – 40 liters & 20 liters capacity
Speed range 50 – 2200 rpm
High torque even at low speeds
Monitoring of set & actual speed
Constant speed even with change of load / Voltage
Advanced Stirrers with microprocessor technology
Constant speed even with change of load / Voltage
Maintenance free Brushless DC motor ensures high torque
Accurate stirring speed control
Easy-to-read backlit LCD for display of set & actual parameters
Display of torque / speed
Last parameter recall, ideal for repetitive processes
Accepts shafts up to 13mm Ø
REMI presents the next generation of magnetic stirrers with new stir technology. These are available in both hotplate & without hotplate versions.
Model
Power [W]
Max. stirring quantity (Water)(Liters)
Stirring Paddle (PTFE coated)
Motor rating input [W]
Motor rating output [W]
Speed range [rpm]
Speed / Temperature display
Speed display resolution [rpm]
Top Plate Material
Dimension of Top Plate [mm]
Heating power [W]
Temperature Range
Control accuracy of heating temperature
Residual Heating Warning Alarm
Control accuracy of heating temperature with PT-1000
External Temperature sensor
Dimensions (WxDxH) (mm)
Weight (kg)
Protection class acc. to DIN EN60529
Technical Data
5 ML plus
50
5
Q-19A (9 x 35mm)
18
10
100-1500
LCD
1
Porcelain enamel
φ135
-
-
-
-
-
-
280x160×85
2.8
IP 42
5 MLH plus
550
5
Q-19A (9 x 35mm)
18
10
100-1500
LCD
1
Porcelain enamel
φ135
500
Up to 340°C
1°C
Above 50°C
0.2°C
PT-1000
280x160×85
2.8
IP 42
10 ML plus
50
10
Q-20A (13 x 50mm)
18
10
100-1500
LCD
1
Glass Ceramic
184 x 184
-
-
-
-
-
-
360x215×112
5.3
IP 21
10 MLH plus
1050
10
Q-20A (13 x 50mm)
18
10
100-1500
LCD
1
Glass Ceramic
184 x 184
1000
Up to 550°C
1°C
Above 50°C
0.2°C
PT-1000
360x215×112
5.3
IP 21
Supply 220/240 Volts, 50 Hz
Vortex Mixers
=
=
=
=
Designed for mixing liquids in Schools, Laboratories & Factories
Touch/ Continuous Operation mode Selection through bi-directional Switch
Speed Regulation through knob provided on the control panel
Interchangeable mixing heads for use with variety of tubes
Interchangeable Mixing Heads
Models Description
CM-01
CM-01/01
CM-01/02
CM-01/03
Universal top plate 100 mm-plate attachment
Tube adapter for 18 holes test tubes ø 10mm (use with CM-01)
Platform pad for <ø99mm tubes and small vessels (use with CM-01)
Tube adapter for 8 holes test tubes ø 20mm (use with CM-01)
Technical Data
Models CM - 101 PLUS
Power [W]
Shaking Movement
Orbital Diameter [mm]
Motor Type
Motor Rating Input / Output [W]
Permissible ON time
Speed range [rpm]
Run Type
Dimensions (mm)
Weight [kg]
Protection Class acc. To DIN 60529
60
Orbital
4
Shaded-Pole Motor
58 / 10
100% power 30mins
0-2500
Continuous / touch operation
127 x 130 x160
3.5
IP 21
Supply 220/240 Volts, 50 Hz
10 MLH Plus 5 MLH Plus
CM - 101 Plus
CM - 01 CM - 01/ 03 CM - 01/ 01
Performance User Friendly
Leading TechnologySafety
==
=
=
==
=
=
=
=
=
=
=
=
=
=
=
=
==
External temperature probe (PT-1000) for control of Speeds range 100 - 1500 rpmfluid temperature
Porcelain Enamel Hot Plate model for temperatures up Last parameter recall, ideal for repetitive processesto 340°CModels 5ML Plus & 5MLH Plus have feature of Ceramic Hot Plate model temperatures up to 550°Cdifferent modes:-
Easy-to-read backlit LCD for display of set & actual A mode for running without external temperature parameterssensor
Monitoring of set & actual temperature / speedB Mode for control of temperature through external
High accuracy of temperature control with embedded sensordual sensors
C Mode for recall of last set Parameters
Advanced Stirrers with microprocessor technologyUnique safety temperature control system
Constant speed even with change of load / VoltageSettable safe temperature limit to avoid overheating
Maintenance free brushless motorResidual Temperature warning when unit is switched
Porcelain Enamel / Ceramic Top Plates off for operator safetyScratch proof & excellent chemical resistance Protection class acc. to DIN EN60529
REMI presents the next generation of magnetic stirrers with new stir technology. These are available in both hotplate & without hotplate versions.
Model
Power [W]
Max. stirring quantity (Water)(Liters)
Stirring Paddle (PTFE coated)
Motor rating input [W]
Motor rating output [W]
Speed range [rpm]
Speed / Temperature display
Speed display resolution [rpm]
Top Plate Material
Dimension of Top Plate [mm]
Heating power [W]
Temperature Range
Control accuracy of heating temperature
Residual Heating Warning Alarm
Control accuracy of heating temperature with PT-1000
External Temperature sensor
Dimensions (WxDxH) (mm)
Weight (kg)
Protection class acc. to DIN EN60529
Technical Data
5 ML plus
50
5
Q-19A (9 x 35mm)
18
10
100-1500
LCD
1
Porcelain enamel
φ135
-
-
-
-
-
-
280x160×85
2.8
IP 42
5 MLH plus
550
5
Q-19A (9 x 35mm)
18
10
100-1500
LCD
1
Porcelain enamel
φ135
500
Up to 340°C
1°C
Above 50°C
0.2°C
PT-1000
280x160×85
2.8
IP 42
10 ML plus
50
10
Q-20A (13 x 50mm)
18
10
100-1500
LCD
1
Glass Ceramic
184 x 184
-
-
-
-
-
-
360x215×112
5.3
IP 21
10 MLH plus
1050
10
Q-20A (13 x 50mm)
18
10
100-1500
LCD
1
Glass Ceramic
184 x 184
1000
Up to 550°C
1°C
Above 50°C
0.2°C
PT-1000
360x215×112
5.3
IP 21
Supply 220/240 Volts, 50 Hz
Vortex Mixers
=
=
=
=
Designed for mixing liquids in Schools, Laboratories & Factories
Touch/ Continuous Operation mode Selection through bi-directional Switch
Speed Regulation through knob provided on the control panel
Interchangeable mixing heads for use with variety of tubes
Interchangeable Mixing Heads
Models Description
CM-01
CM-01/01
CM-01/02
CM-01/03
Universal top plate 100 mm-plate attachment
Tube adapter for 18 holes test tubes ø 10mm (use with CM-01)
Platform pad for <ø99mm tubes and small vessels (use with CM-01)
Tube adapter for 8 holes test tubes ø 20mm (use with CM-01)
Technical Data
Models CM - 101 PLUS
Power [W]
Shaking Movement
Orbital Diameter [mm]
Motor Type
Motor Rating Input / Output [W]
Permissible ON time
Speed range [rpm]
Run Type
Dimensions (mm)
Weight [kg]
Protection Class acc. To DIN 60529
60
Orbital
4
Shaded-Pole Motor
58 / 10
100% power 30mins
0-2500
Continuous / touch operation
127 x 130 x160
3.5
IP 21
Supply 220/240 Volts, 50 Hz
10 MLH Plus 5 MLH Plus
CM - 101 Plus
CM - 01 CM - 01/ 03 CM - 01/ 01
Performance User Friendly
Leading TechnologySafety
==
=
=
==
=
=
=
=
=
=
=
=
=
=
=
=
==
External temperature probe (PT-1000) for control of Speeds range 100 - 1500 rpmfluid temperature
Porcelain Enamel Hot Plate model for temperatures up Last parameter recall, ideal for repetitive processesto 340°CModels 5ML Plus & 5MLH Plus have feature of Ceramic Hot Plate model temperatures up to 550°Cdifferent modes:-
Easy-to-read backlit LCD for display of set & actual A mode for running without external temperature parameterssensor
Monitoring of set & actual temperature / speedB Mode for control of temperature through external
High accuracy of temperature control with embedded sensordual sensors
C Mode for recall of last set Parameters
Advanced Stirrers with microprocessor technologyUnique safety temperature control system
Constant speed even with change of load / VoltageSettable safe temperature limit to avoid overheating
Maintenance free brushless motorResidual Temperature warning when unit is switched
Porcelain Enamel / Ceramic Top Plates off for operator safetyScratch proof & excellent chemical resistance Protection class acc. to DIN EN60529
Max. stirring capacity (Water)[Liters]
Motor rating input [W]
Motor rating output [ W]
Speed range [rpm]
Speed display
Max. torque [Ncm]
Torque display
Motor Overload protection
Chuck Ø [mm]
Stirring Shaft Ø x length (mm)
Dimensions [W x H x D] (mm)
Weight [kg]
Power [W]
Protection class acc. to DIN/EN 60529
Technical Data
RQ - 40 Plus
40
120
100
50-2200
LCD
60
LCD
LED light flash, auto stop
13
14 x 220
83 x 220 x 186
2.4
130
IP 42
RQ - 20 Plus
20
60
50
50-2200
LCD
40
LCD
LED light flash, auto stop
13
14 x 220
83 x 220 x 186
2.4
70
IP 42
Supply 220/240 Volts, 50 Hz
Magnetic StirrersLaboratory Stirrers
Magnetic StirrersLaboratory Stirrers
Magnetic StirrersLaboratory Stirrers
Magnetic StirrersLaboratory Stirrers
Laboratory Stirrers - Direct Drive
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
REMI presents the next generation of laboratory stirrers for stirring / mixing etc. of chemical, pharmaceutical, food and cosmetic products. The equipment basically consists of body, chuck, stainless steel blade propeller and a U-type stand.
Safety
Performance
Leading Technology
User Friendly
Motor protection in case of continuous overload
Stopper for protection of vessel & shaft
Special base design for topple free operation
Protection class acc. to DIN/EN 60529
2 models – 40 liters & 20 liters capacity
Speed range 50 – 2200 rpm
High torque even at low speeds
Monitoring of set & actual speed
Constant speed even with change of load / Voltage
Advanced Stirrers with microprocessor technology
Constant speed even with change of load / Voltage
Maintenance free Brushless DC motor ensures high torque
Accurate stirring speed control
Easy-to-read backlit LCD for display of set & actual parameters
Display of torque / speed
Last parameter recall, ideal for repetitive processes
Accepts shafts up to 13mm Ø