main specifications - centra...

AMERICAN ISUZU MOTORS INC. PowerTrain Division 46401 COMMERCE CENTER DRIVE • PLYMOUTH, MI 48170 PHONE: (734) 582-9470 •FAX: (734) 455-7581 www.isuzuengines.com MAIN SPECIFICATIONS Type 6 Cylinder, 4 Cycle, Water Cooled, OHV, Vertical In-Line, Direct Injection Bore & Stroke 4.13 x 4.92 in. (105 mm x 125 mm) Piston Displacement 396.3 cu. in. (6.5 l) Compression Ratio 17.5:1 Dry Weight 1088 lbs. (494 kg) Dimensions (L x W x H) 46.4 x 27.2 x 37.5 in. (1179 x 691 x 951.5 mm) Coolant Capacity 12.7 qt. (12 l) Lube Oil Capacity 22.7 qt. (21.5 l) Engine Rotation Direction Counter Clockwise from Flywheel MAIN FEATURES (Standard) Alternator 12V - 60A Voltage Regulator Internal Starter 12V - 2.5 kW Exhaust Outlet Center Upward Air Inlet Integral Flywheel Housing SAE #3 Type (w/metric threads) Flywheel SAE Type for 11.5" over center clutch (w/metric threads) Oil Pan 35° Inclination all directions Water Outlet Upward Fan 23.6 in. (600 mm) Suction INDUSTRIAL RATING* Intermittent 174 BHP @ 2500 RPM Continuous 154 BHP @ 2500 RPM Max Torque 443 lb. ft. @ 1800 RPM *SAE J1995 Gross BHP Specifications subject to change without notice. ISUZU 6BGIT INDUSTRIAL DIESEL TORQUE - LB-FT BSFC - LB/BHP-HR www.centrateknindo.com www.centrateknindo.com www.centrateknindo.com www.centrateknindo.com

Upload: ngonhi

Post on 03-May-2018

218 views

Category:

Documents

3 download

Report

Download

Embed Size (px):

TRANSCRIPT

Page 1: MAIN SPECIFICATIONS - Centra Teknindocentrateknindo.com/phocadownload/engine/isuzu/6BG1T.pdfAlternator 12V - 60A Voltage Regulator Internal Starter 12V - 2.5 kW Exhaust Outlet Center

AMERICAN ISUZU MOTORS INC.PowerTrain Division

46401 COMMERCE CENTER DRIVE • PLYMOUTH, MI 48170PHONE: (734) 582-9470 •FAX: (734) 455-7581www.isuzuengines.com

MAIN SPECIFICATIONS

Type 6 Cylinder, 4 Cycle, Water Cooled, OHV, Vertical In-Line, Direct Injection

Bore & Stroke 4.13 x 4.92 in. (105 mm x 125 mm)

Piston Displacement 396.3 cu. in. (6.5 l)Compression Ratio 17.5:1Dry Weight 1088 lbs. (494 kg)Dimensions (L x W x H) 46.4 x 27.2 x 37.5 in.

(1179 x 691 x 951.5 mm)Coolant Capacity 12.7 qt. (12 l)Lube Oil Capacity 22.7 qt. (21.5 l)Engine Rotation Direction Counter Clockwise

from Flywheel

MAIN FEATURES (Standard)

Alternator 12V - 60AVoltage Regulator InternalStarter 12V - 2.5 kW Exhaust Outlet Center UpwardAir Inlet IntegralFlywheel Housing SAE #3 Type (w/metric threads)Flywheel SAE Type for 11.5"

over center clutch (w/metric threads)

Oil Pan 35° Inclination all directions

Water Outlet UpwardFan 23.6 in. (600 mm) Suction

INDUSTRIAL RATING*

Intermittent 174 BHP @ 2500 RPMContinuous 154 BHP @ 2500 RPMMax Torque 443 lb. ft. @ 1800 RPM*SAE J1995 Gross BHP

Specifications subject to change without notice.

ISUZU 6BGIT INDUSTRIALDIESEL

TOR

E -

-FT

- L

B/B

-HR

www.centra

teknindo.com

www.centra

teknindo.com

www.centra

teknindo.com

www.centra

teknindo.com

ISUZU ’’B’’ SERIES SPECIAL FEATURES

Direct InjectionReplaceable Cromard Dry LinersOil Cooled PistonsTuftrided CrankshaftGlow Plug Starting Assist

LOW EMISSIONS

Modified Combustion Chamber DesignOptimized Injection Timing with Zexel A-Type In-Line PumpRSV Governor

ADDITIONAL FEATURES

All New B Models have IdenticalAccessory Drive ConfigurationsHigh-Efficiency Turbocharged EliminateNeed for Wastegate MechanismsMaximum Parts Commonality among All B Models

QUIET OPERATION

New Injection Timing SystemHigh-rigidity Cast Iron Cylinder BlockHelical Timing Gears have a Minimum of Backlash

DIMENSIONS

AMERICAN ISUZU MOTORS INC.PowerTrain Division

46401 COMMERCE CENTER DRIVE • PLYMOUTH, MI 48170PHONE: (734) 582-9470 • FAX: (734) 455-7581www.isuzuengines.com

L-6BG1TE-312/99

ISUZU 6BGIT INDUSTRIALDIESEL

37.5(951.5) H

27.2(691) W

46.4(1179) L

www.centra

teknindo.com