MAKE YOUR OWN....

MACHO MUNNY!

Instructions for the Macho Munny Vest1. Cut out the shape and cut a slit on the dashed line2. Trace the pattern onto stretchy fabric, and cut the fabric the same way that you cut the paper3. Push Munny’s arms back and up (so he looks like he’s going to long-jump)4. Place the ams through the slit, so that the edges of the slit fit on Munny’s shoulders5. Take your Munny with you to protect you from the bad guys. SO MACHO!

www.kidrobot.com/munny

MAKE YOUR OWN....

MUNGAREES!

Instructions for Munny Mungarees1. Cut out the shape and the 3 circles inside3. Trace the shape onto stretchy fabric and cut it out.2. Place your Munny’s feet inside the two large holes, so his tail fits into the smaller hole.3. Pull the two sides up by Munny’s shoulders and tie them together4. Your Munny is ready to go!

www.kidrobot.com/munny

TAIL HOLE

FEET HOLES

MAKE YOUR OWN....

SUPER MUNNY!

Instructions for the Super Munny Cape1. Pop the arms and head off of your Munny--(WARNING!! Vinyl can rip! Please do this with care & at your own risk) 2. Cut out the large circle and the 3 circles inside3. Trace the pattern onto stretchy fabric, and cut the fabric the same way that you cut the paper.4. Place the big hole at the top of your Munny (where the head goes) and the two small holes where the arms will go.5. Put your Munny’s head and arms back on.6. Walah! Super Munny ot the rescue!! www.kidrobot.com/munny

FRONT

BACK