making mobile cases
TRANSCRIPT
![Page 1: Making mobile cases](https://reader035.vdocuments.net/reader035/viewer/2022062412/589e3f361a28ab07478b6083/html5/thumbnails/1.jpg)
Making mobile cases
Recycle old cardboard and fabric
![Page 2: Making mobile cases](https://reader035.vdocuments.net/reader035/viewer/2022062412/589e3f361a28ab07478b6083/html5/thumbnails/2.jpg)
Measure your phone in order to cut 3 pieces of cardboard properly
You will need: cardboard from milk or juices, fabric scraps, felt (it’s soft) rubber scraps, glue
![Page 3: Making mobile cases](https://reader035.vdocuments.net/reader035/viewer/2022062412/589e3f361a28ab07478b6083/html5/thumbnails/3.jpg)
The larger ones will be the front and back cover. The rounded will be inside.
Cut 3 pieces of cardboard a bit larger than your phone. One has rounded edges!
![Page 4: Making mobile cases](https://reader035.vdocuments.net/reader035/viewer/2022062412/589e3f361a28ab07478b6083/html5/thumbnails/4.jpg)
If you use adhesive fabric, put the two pieces next to each other.Just leave 1,5cm distance so that they can be folded. Trim and turn the edges. Glue the felt on top.
![Page 5: Making mobile cases](https://reader035.vdocuments.net/reader035/viewer/2022062412/589e3f361a28ab07478b6083/html5/thumbnails/5.jpg)
If you use a hot-glue gun, it might be easier…whatever suits you best.
Glue the edges carefully and let it dry..
![Page 6: Making mobile cases](https://reader035.vdocuments.net/reader035/viewer/2022062412/589e3f361a28ab07478b6083/html5/thumbnails/6.jpg)
That’s the tricky part. Add a rubber band to the side of the case. Let it be big enough for your finger. This will secure the case. We need it to be tight.
![Page 7: Making mobile cases](https://reader035.vdocuments.net/reader035/viewer/2022062412/589e3f361a28ab07478b6083/html5/thumbnails/7.jpg)
Add two rubber bands to hold the phoneNow glue the felt
![Page 8: Making mobile cases](https://reader035.vdocuments.net/reader035/viewer/2022062412/589e3f361a28ab07478b6083/html5/thumbnails/8.jpg)
Assemble the case.The rounded piece goes over the piece with the rubber band. Just letthe glue dry and keep it tight.
![Page 9: Making mobile cases](https://reader035.vdocuments.net/reader035/viewer/2022062412/589e3f361a28ab07478b6083/html5/thumbnails/9.jpg)
From lots of scraps you can create cases!