maloney technical products has expertise in the ... · ansi/awwa c110/a21.10 ansi/awwa c115/a21.15...

1

ANSI/AWWA C110/A21.10 ANSI/AWWA C115/A21.15 ANSI/AWWA C153/A21.53 ANSI/AWWA C111/A21.11 ASMW/ANSI B16.1 ASME/ANSI B16.5 Maloney has been making products, including gaskets, for over 75 years from a variety of elastomer, including: CONTACT US! Please call or e-mail Maloney Technical Products for pricing and delivery. Phone: 817-923-3344 Email: [email protected] MALONEY CAN SUPPLY YOUR SPECIALTY ELASTOMER GASKET NEEDS FOR: Maloney Technical Products has expertise in the manufacture of Specialty Elastomer Gaskets for water, wastewater and industrial applications. Our gasket sizes are available in a size range from 4”-64”. MALONEY PRODUCTS MEET OR EXCEED THE REQUIREMENTS OF THE APPROPRIATE AWWA & ANSI STANDARDS: MJ Joints MJ Transition Gaskets Push-On Joints Full Face Flange (1/8” thick/three bulb type rings) Ring Flange (1/8” thick/three bulb type rings) EPDM NBR (Nitrile®) Neoprene® FKM (Viton®) 1300 East Berry Street Fort Worth, TX 76119 WWW.MALONEYTECH.COM

Upload: others

Post on 27-Jan-2020

69 views

Category:

Documents

0 download

Report

Download

Embed Size (px):

TRANSCRIPT

Page 1: Maloney Technical Products has expertise in the ... · ANSI/AWWA C110/A21.10 ANSI/AWWA C115/A21.15 ANSI/AWWA C153/A21.53 ANSI/AWWA C111/A21.11 ASMW/ANSI B16.1 ASME/ANSI B16.5 . Maloney

ANSI/AWWA C110/A21.10 ANSI/AWWA C115/A21.15 ANSI/AWWA C153/A21.53

ANSI/AWWA C111/A21.11 ASMW/ANSI B16.1 ASME/ANSI B16.5

Maloney has been making products, including gaskets, for over 75 years from a variety of elastomer, including:

CONTACT US! Please call or e-mail Maloney Technical Products for pricing and delivery.

Phone: 817-923-3344 Email: [email protected]

MALONEY CAN SUPPLY YOUR SPECIALTY ELASTOMER GASKET NEEDS FOR:

Maloney Technical Products has expertise in the manufacture of Specialty Elastomer Gaskets for water, wastewater and industrial applications.

Our gasket sizes are available in a size range from 4”-64”.

MALONEY PRODUCTS MEET OR EXCEED THE REQUIREMENTS OF THE APPROPRIATE AWWA & ANSI STANDARDS:

MJ Joints MJ Transition Gaskets Push-On Joints Full Face Flange (1/8” thick/three bulb type rings) Ring Flange (1/8” thick/three bulb type rings)

EPDM NBR (Nitrile®) Neoprene® FKM (Viton®)

1300 East Berry Street Fort Worth, TX 76119 WWW.MALONEYTECH.COM

B300a-11 Addendum to ANSI/AWWA B300-10 Standard for ... · ©B300a-11 Addendum to ANSI/AWWA B300-10 Standard for Hypochlorites Approved by AWWA Board of Directors Jan. 23, 2011. Approved

Flanged Ductile-Iron Pipe With Ductile-Iron or Gray-Iron ... · The Authoritative Resource on Safe WaterSM ANSI/AWWA C115/A21.15-05 (Revision of ANSI/AWWA C115/A21.15-99) AWWA Standard

ANSI AWWA C150 A21.pdf

ANSI AWWA D100-96 (SEC 1 - 3.4).pdf

WATER & WASTEWATER...ANSI/AWWA C151/A21.51-02 American National Standard for Ductile-Iron Pipe, Centrifugally Cast, for Water ANSI/AWWA C153/A21.53-06 American National Standard for

SAMPLE SPECIFICATIONS (Current ANSI/AWWA revisions apply)

NOMINAL JOINT DIMENSIONS IN INCHES …mcwaneinternational.com/upl/downloads/catalog/products/submittal... · 13 ANSI/AWWA C110/A21.10, ANSI/AWWA C111/A21.11 SAMPLE SPECIFICATION (Current

ductilE iron - c110 - U.S. · PDF fileductilE iron - c110. ... in accordance with ANSI/AWWA C104/A21.4. ansi/aWWa standards Mechanical joint Fittings. MEchanical joint Fittings NSF

TABLE OF CONTENTS - Future Iron Pipes (FIP) · PDF fileof ANSI/ AWWA C216, ANSI/AWWA C215, ANSI/AWWA C203, ANSI/AWWA C209 or to be as recommend-ed by the manufacturer. Manufacturer

ANSI/AWWA C115/A21.15 Attachment - U.S. Pipe › upload › fabrication › products › fabricated-… · ANSI/AWWA C115/A21.15‐99 Table A.1 Flange gasket details Nominal Bolt

Metal-Seated Gate Valves for Water Supply Service...ANSI/AWWA C500-09 (Revision of ANSI/AWWA C500-02) AWWA Standard Effective date: Oct. 1, 2009. First edition approved by AWWA Board

AWWA Grooved Products AF-4 Grooved Flange Adapterfile.seekpart.com/keywordpdf/2010/12/23/201012238554530.pdf · Designed for connecting ANSI/AWWA C110/A21.10 and ASME/ANSI B16.1 Class

Ductile Iron System · 2020. 1. 31. · with ANSI/AWWA C-606 • Conform to ANSI 21.10/AWWA C-110 for center-to-end dimensions and AWWA C-153 or ANSI 21.10/ AWWA C-110 for wall thicknesses

C110 DUCTILE IRON MECHANICAL JOINT FITTINGS€¦ · • ANSI / AWWA C110/A21.10 for Full Body Ductile Iron Fittings 2”-48” for water and other liquids. INSTALLATION: • Per ANSI/AWWA

AWWA STANDARD FC)R FJLrEIZING = ..MAl-tRIAL~...ANSI/AWWA 8100-96 (Revision of ANSI! AWWA B100-89) AWWA STANDARD FC)R FJLrEIZING= ..MAl-tRIAL~ AMEfUCANNAlJONAl" ,STANDMD .' Effective

Butterfly Valves & Controls Inc. | High Performance Butterfly Valves · 2019. 7. 17. · 1 Design standard conform to : ANSI/AWWA C504 2.Connection flange conform to : ANSI/AWWA Cili1A21.11

McWANE DUCTILE IRON PIPE...standards awwa c153 / ansi a21.53, awwa c104 / ansi a21.4, awwa c111 / ansi a21.11 visit pe.mcwane.com for more information All Dimensions are in Inches

SERIES GVI AWWA C509/C515 RESILIENT SEATED GATE VALVES · by the American Water Works Association (AWWA) in Standard ANSI/AWWA C509 and ANSI/AWWA C515. 2.2. When requested, manufacturer

MARS Company Announces Compliance to ANSI/AWWA C715 …

NOMINAL JOINT DIMENSIONS IN INCHES MECHANICAL JOINT … · 2016-04-04 · 13 ANSI/AWWA C110/A21.10, ANSI/AWWA C111/A21.11 SAMPLE SPECIFICATION (Current ANSI/AWWA revision apply) Mechanical

May 7, 2014 - PNWS-AWWA...ANSI/AWWA C115/A21.15 Flanged Ductile-Iron Pipe ANSI/AWWA C116/A21.16 Fusion-Bonded Epoxy Coatings for Fittings ANSI/AWWA C150/A21.50 Thickness Design ANSI/AWWA

ANSI AWWA D100-96 (SEC 8.4 - 12.4.3).pdf

V-Bio Enhanced Polyethylene Encasement and Corrosion …€¦ · ANSI/AWWA C150/A21.50, ANSI/AWWA C151/A21.51, ANSI/AWWA C105/A21.5, AWWA C600 and M41. V-Bio Enhanced Polyethylene

STANDARD CONSTRUCTION SPECIFICATIONS FOR … 60 - Blue… · ANSI/ AWWA D100 Welded Steel Tanks for Water Storage ANSI/ AWWA D102 ... The use of pipe containing asbestos materials

InternatIonal Data Sheet P-2361 resilient Wedge Gate Valve...AWWA / ANSI C550. • Meets requirements of AWWA / ANSI C515 and is certified to ANSI/ NSF 61 & 372. • Ductile Iron wedge,

Conexiones Compactas de Junta Mecanica...ANSI / AWWA C111 / A21.11 Listado en Underwriters Laboratories (UL) y aprobado por Factory Mutual (FM), NSF 61. ANSI / AWWA C153 / A21.53 para

B300a-11 Addendum to ANSI/AWWA B300-10 Standard for ... · ii AWWA Standard This document is an American Water Works Association (AWWA) standard. It is not a speciﬁ cation. AWWA

American Water Works Association ANSI/AWWA C206-97

PCWI Compact Porosity Detectors€¦ · ASTM G62, ASTM D5162, ASTM D4787, NACE SP0274,NACE TM0186, NACE TM0384, NACE SP0490, NACE SP0188, ANSI/AWWA C203, ANSI/AWWA C214, ISO 29601

Thrust Restraint CA-NV Section AWWA Annual Fallca-nv-awwa.org/canv/downloads/Armando/Miguel/AFC14/Speaker... · AWWA Standards ANSI/AWWA C104/A21.4 Cement-Mortar Linings ANSI/AWWA

ANSI Webstore - Hypochlorites...ANSI/AWWA B300-18 (Revision of ANSI/AWWA B300-10) AWWA Standard ® SM Hypochlorites Effective date: Sept. 1, 2018. First edition approved by AWWA Board

T-H TUBERÍA HELICOIDAL - Materiales Industriales de ...grupo-mim.com/Catalogos/th.pdf · ansi / awwa c-213 / awwa c-214 / c-215 / din 30670 polipropileno: ansi / awwa c-213 / c-214

Thrust Restraint PAAWWA 4 15 · PDF fileThrust Restraint Design for Ductile Iron PIpe ... AWWA Standards ANSI/AWWA C104/A21.4 Cement-Mortar Linings ANSI/AWWA C105/A21.5 Polyethylene

McWANE DUCTILE IRON PIPEmcwaneductile.com/upl/downloads/catalog/products/tr-flex... · coating ansi / awwa c104 / ansi 21.4 gaskets ansi / awwa c111/ ansi a21.11 standards awwa c150/ansi

Operator’s Handbook for Compact High Voltage PULSE CREST ... · NACE TM0186, NACE TM0384, NACE SP0490, NACE SP0188, ANSI/AWWA C203, ANSI/AWWA C214, ISO 29601 CE Marked PCWI Compact