1. Clamp Jack to the mandolin. The assembly attaches to the rib, placing the jack on the instrument’s back. Use metal tool (provided) to tighten.

2. Loosen all of the mandolin’s strings.

4. Lift the bridge with both hands and slide the element under. If necessary, remove lowest strings for installation.

3. Place the bridge element beside the bridge so that silver dots are inside the bridge posts.

Instructions

Yeah, I forgot to address this when we were on the phone earlier. First, the instructions you got are for the violin, and they do want us to work up instructions that do a better job of maintaining the look and feel of the packaging that we’ve developed. So, this is a bit of a separate project. For the box insert piece, as I see it there is really not too much we need by way of naming the parts. • Transducer Element Handle with care - do not over-flex. Save this sleeve for storage • Realist Cable • Cord Retrieval Hook The cord retrieval hook only applies to the violin and viola pickups. Same for the cable. Aside from

MandolinInstallation

Top View Back View