manual for titan mouse
DESCRIPTION
booklet for titan mouseTRANSCRIPT
Manual l titanum mouse
2
1
4
3
6
5
Manual l titanum mouse
Bluetooth
Batteries
Description l
l
l
Description
1
right click button
scroll roll button
left clickbutton
Description
2
connectbutton
lense
battery cover
radio button
Batteries
3
Batteries
4
Bluetooth
5
radio button
connect buttonpress
on
At this point you need to set up a connection between the mouse and your computer. Depending on your software version , the following steps are generally required;
• Click on the 'Windows Start' button. Click on 'Control Panel'.• Now click on 'Printers and Other Hardware' Click on 'Bluetooth devices'. With in this menu click on 'Add' .
• Turn the mouse on and press the 'connect'button on the bottom side of the mouse.• Now you need to check the radio button 'My device is setup and ready to be found' and click on the 'Next' button.
6
Bluetooth
on
• The mouse will appear in the list of found devices. Please select the mouse and click on the 'Next' button to install the mouse.• Select the option 'Don't use a passkey'. Once the mouse has been successfully installed, you can close the wizard.
Installation completeThis concludes the installation ; you can nowstart using your Titanium Mouse. When yourcomputer restarts, or after you turn off themouse, you do not need to repeat the abovesteps.
Romana Hladká l 2010