manual no. zz997k automatic placket setting machine ... · pdf file97-6570k unload tray...

http://www.atlatt.com

MANUAL NO. ZZ997KSETUP INSTRUCTIONS, LIST OF PARTS AND PNEUMATIC DIAGRAMS FOR

997KAutomatic Placket Setting Machine

COPYRIGHT© 2000-2001BY

ATLANTA ATTACHMENT COMPANY, INC. ALL RIGHTS RESERVED

IN ALL COUNTRIESTHIS DEVICE IS COVERED BY ONE OR MORE

U.S. AND/OR FOREIGN PATENTS

The sale of this product does not sell or otherwise transfer any license or other rights under U.S. Patents5,159,889 or 5,203,270 or under any corresponding foreign patents.

ATLANTA ATTACHMENT CO., INC. LAWRENCEVILLE, GEORGIA 30045(770) 963-7369 • FAX (770) 963-7641

PRINTED IN U.S.A.

This equipment is protected by one or more of the following patents: US patents:4,038,933; 4,280,421; 4,432,294; 4,466,367; 4,644,883; 4,886,005; 5,134,947; 5,159,889; 5,203,270; 5,307,750; 5,373,798; 5,437,238; 5,522,332; 5,524,563; 5,562,060; 5,634,418; 5,647,293; 5,657,711; 5,743,202; 5,865,135; 5,899,159; 5,915,319; 5,918,560; 5,924,376; 5,979,345, 6,035,794

Foreign patents - 2,084,055; 2,076,379; 2,177,389; 2,210,569; 4-504,742; 8-511,916; 9-520,472; 0,537,323; 92,905,522.6; 95,935,082.8;

96,936,922.2.

Other U.S. and Foreign Patents Pending. 2000 Atlanta Attachment Company.

!! I M P O R T A N T!! I M P O R T A N TIt is important to read and understand the information contained within thismanual before attempting to operate the machine. Atlanta Attachment Co., Inc.shall not be held liable for damage resulting from misuse of the informationpresented within, and reserves the right to change the information containedwithin, without prior notification.

Table Of ContentsDescription ...................................................................................... 1Features ........................................................................................... 1Unpacking And Setup ..................................................................... 1Unpacking And Setup (Continued) ................................................. 2Power On Procedure ....................................................................... 2Touch Screen Operation ................................................................. 3Sequence Of Operation ................................................................... 4Pull Station: ..................................................................................... 4Fold Station ..................................................................................... 5Unload Station ................................................................................ 5Running Sleeves .............................................................................. 6Load cloth: ...................................................................................... 6Settings: ........................................................................................... 6Adjust finish sleeve size: ................................................................ 7Complete Order: .............................................................................. 7Default Parameter Settings and Speeds .......................................... 8Advanced Settings: ......................................................................... 8Default Parameter Settings and Speeds (continued) ....................... 9Speed Settings ................................................................................. 9Recommended Spare Parts ........................................................... 10Timing Sequence Chart ................................................................. 11Assembly Drawings And Parts List ............................ 15997K Main Assembly ................................................................... 1697-1000K1 Stand Assembly ......................................................... 1897-1000K2 Covers And Guards .................................................... 2097-1300K Vacuum Components ................................................... 2297-1600K Control Panel ............................................................... 2497-1660K Servo Control Panel ..................................................... 2697-2400K Puller Assembly ........................................................... 2897-3300K Spreader/Feed Assembly ............................................. 3097-5250K Pulley And Encoder Assembly .................................... 3397-5200K Pull Carriage Assembly ............................................... 3497-6560K Unload Pivot Cylinder Assembly ................................ 3697-6570K Unload Tray Assembly ................................................ 3797-5260K Pull Carriage Drive Assembly ..................................... 3897-5270K Pull Gripper Assembly ................................................ 4097-5600K Fold Roller Assembly .................................................. 4297-6500K Unloader Assembly ..................................................... 4497-6700K Stacker Assembly ........................................................ 4697-8100K Spreader Assembly ...................................................... 48997K-WD Wiring Diagram .......................................................... 49997K-PD Pneumatic Diagram ...................................................... 50

997K

DescriptionThe 997K unit is an automatic workstation with programmable elec-tronic controls for producing long, single ply or folded tubular knit sleeves.

Features• Precise and consistent operation eliminates waste.• Patented Serial Bus Control System with self-diagnostic software.• Easy to use touch screen interface.• Automatic stacking.• 6" to 28" long sleeves, 2-1/2" to 3-1/2" wide tubular fabric.• Ability to run Kevlar® and cotton material.

Unpacking And Setup• Remove any loosely packed components from around the machine and remove the unit from the pallet. If the machine is not palletized, unlock the casters and wheel the unit into location.• Exercising care, remove the shipping support on the end of the car-ousel tubes so as not to scratch or bend tubes.• Remove all packing material from the machine. The following items may have been secured for shipment or removed and packed sepa-rately:

» Raw material support rods and touch screen/emergency stop button assembly.» Material feed and spreader assembly.» Material prefeed puller rollers.» Cutoff knife blade (CAUTION: BLADES ARE SHARP!).» Pull carriage and pull grippers.» Fold rollers.» Unload carriage.» Carousel assembly.

1Atlanta Attachment Company(770)963-7369 FAX (770)963-7641

997K

Unpacking And Setup (Continued)• Assemble the material support rods and touch screen components to the frame. (Refer to drawings 192287C and 192288C).• Once machine is in it’s location, adjust the (8) leveling pads such that the machine is level and the casters are off the floor.• Connect air and power. It maybe convenient to run the 3/8" air sup-ply line through the touch screen mounting pole and the power cord through the material support pole.

» A minimum air supply of 10 scfm at 70 psi is required.» Electrical connection requires 208/240-vAC single phase at 20 amps.

CAUTION:CAUTION:CAUTION:CAUTION:This machine has a cloth-cutting knife. This knife cuts

automatically. DO NOT place fingers or hands around the knife. All adjustments are to be made with the power off.

Power On Procedure• Turn the red air supply valve ¼ turn in the counter clockwise direc-tion. Air will flow into the machine and pressurize the system. Some compo-nents may move.• Turn the red emergency button clock-wise to release the switch.• Press the green start button. The light on the touch screen will turn red, then green. The "Power On Screen" will appear and the Vacuum Generator will turn on.• Press the "Set Machine To Home Position" button. The Carousel will rotate to home position and the Pull Carriage will cycle and reset its position.• If these functions are completed correctly, the "997K READY" screen will appear. The machine is ready to operate.

2 Atlanta Attachment Company(770)963-7369 FAX (770)963-7641

997K

Touch Screen OperationThe graphics images presented on the touch screen show "3-dimen-

sional" buttons which may be pressed to access other screens, change counters and timers, or actuate hardware. Areas lacking the "3- dimen-sional" border contain information only. Counters are identified with the "+" and "-" buttons in the corners. These counters may be adjusted by pressing the "+" and "-" boxes. Pressing RESET from any screen clears all machine functions and returns to the 997K READY page.

Normal operation of the machine is controlled from the 997K READY screen. From here you can START automatic operation, change values of the CURRENT SETTINGS, and access other functions and settings through the OPERATOR FUNCTION button and the ADVANCED FUNCTIONS button.

The OPERATOR FUNCTIONS button allows anyone to access the necessary functions and adjustments needed for normal operation of the machine.

The ADVANCED FUNCTIONS button allows access to the higher-level functions of the machine. These functions include: timers that con-trol machine hardware, input and output test screens, machine statis-tics, and error history. To get to the advanced functions the appropriate password must be entered at the security screen. Security access is reset whenever the main power is turned off or the RESET button on the 997K READY screen is pressed.


997K

Sequence Of OperationPull Station:

• When the start button is pressed, the pull grippers will lower into position. The carriage will travel towards the material and stop with the grippers inside the material spreader.• The grippers will then engage the cloth, the carriage motor will then turn on and begin to pull the cloth over the mandrel. As the material is being pulled, the feed rollers will feed cloth from the reserve trough and put slack cloth on the spreader. This is to mini-mize stretching of the fabric as it is being pulled.• After the proper amount of cloth is pulled (the setting SLEEVE LENGTH plus SLEEVE LENGTH ADJUSTMENT), the pull carriage will stop and the knife will cut the cloth. The grippers will then disen-gage from the material and the carriage will return to its home position.• The carousel will then rotate to position this sleeve at the fold sta-tion and allow another sleeve to be pulled.


997K

Fold Station• When the carousel has stopped, the fold rollers will close and engage the material.• The vacuum gate valve will open and pull the trailing end of the material into the mandrel to start the fold.• The rollers will then start to turn and continue folding the sleeve. After a programmed amount of time (the setting FOLD TIME) the roll-ers will stop, completing the fold.• The rollers will then move away from the sleeve. At the proper time, the carousel will rotate again to position the folded sleeve at the unload station.

Unload Station• When the carousel has stopped, the unloading grippers will move into position and grip the folded sleeve.• The unload carriage will then pull the sleeve off the mandrel and onto a spreader. This spreader will straighten out the inside ply of material.

• When the entire sleeve is on the spreader, the unload car-riage will pivot and then strip the sleeve off the spreader and onto a tray.• The tray will then pivot and stack the sleeve.

Keep notches up.

This end intocloth.


997K

Running SleevesMachine is turned on and the 997K READY screen is on the display.

Load cloth:• Remove the outside material disk, push a roll of material onto the shaft (wind direction of the roll does not matter), and replace disk.• Insert the free end of cloth between the pre-feed rollers. Press the OPERATOR FUNCTIONS but-ton and then press the load button. Feed out approximately 3' of cloth into the trough and release button.• Raise the top main feed roller and remove the spreader. Insert the spreader in the open end of the cloth as shown below until 1" of cloth is past the metal end. Return the spreader to feed station keeping the notches facing up. Seat the plastic spreader anchor between the two lower rollers. Lower the top the roller.• Press the MANUAL CUT button to trim the loose end of the cloth.

Settings:• Press the ORDER SETUP button, and set the desired OPERATION TYPE, SLEEVE LENGTH, ORDER QUANTITY, and QUANTITY PER BUNDLE.• Set the SLEEVE LENGTH ADJUSTMENT to 50% more than the SLEEVE LENGTH.• Set the FOLD TIME to 100 times the SLEEVE LENGTH.• Press the RUN ONE SLEEVE button. The machine will process a single sleeve. After it is stacked, inspect the sleeve.


997K

Adjust finish sleeve size:• If the inside ply is protruding past the outer ply, decrease the FOLD TIME value. If the inner ply is inside the outer ply, increase the FOLD TIME.• Run a sleeve after each adjustment to verify settings.• When the ends are even, measure the sleeve length. Adjust the SLEEVE LENGTH ADJUSTMENT setting up or down accordingly. This will also require an adjustment to the FOLD TIME as described above.• When the sleeve length is correct and the fold is even, record the settings for later use.

Complete Order:• Press the RESET button. The machine will reset and the display will return to the 997K READY screen.• Press start. The machine will now run sleeves and stack them per the set quantities.• Due to variations in the cloth throughout the roll, the FOLD TIME parameter might need adjusting during operation.


997K

Default Parameter Settings and SpeedsAdvanced Settings:

Name/Default Value DescriptionPull Gripper Extend Distance/550

Distance pull carriage travels from home towards knife to grip material.

Unload Carriage Out Delay/50 Amount of time from when the trailing edge is detected to the unload carriage out valve turning off.

Sleeve Flip On Time/35 Amount of time the sleeve flip cylinder is turned on.

Sleeve Transfer On Time/25 Amount of time the sleeve transfer cylinder is turned on.

Bundle Hold On Time/40 Amount of time the bundle hold cylinder is turned on.

Sleeve Length/6 Nominal finished sleeve length. Value establishes amount of raw material pull-off.

Pull Length Adjustment/5 Additional travel of the pull carriage to compensate for material stretching over the mandrel.

Folding Time/440 Amount of time the fold rollers are turning.

Quantity Per Bundle/25 Quantity of sleeves per bundle before machine pauses to unload stacker.

Material Tpye/0 (Kevlar) Sets the type of material to be run. Also sets the mode of the machine for single or double ply.

Single Ply Sleeve Length/6 Nominal finished sleeve length. Value establishes amount of raw material pull-off.

Order Quantity/200 Quantity of sleeves of one size before machine pauses.

Prefeed Motor Off Delay/75 Amount of time the prefeed motor runs after the eye goes dark

Spreader Motor Off Delay/0 Amount of time the spreader motor runs after the stop switch is activated

Encoder Compensation/03515 Value for converting encoder pulses into linear displace-ment of pull carriage.

Slow Distance/30 Amount of distance the pull carriage is in slow speed before stopping.

Single Extra Pull/150 Amount of extra pull after cut in single ply mode to get end of sleeve on tube.


997K

Default Parameter Settings and Speeds (continued)Speed Settings

• CarouselCarousel = 13.25 rpm.Motor (p/n EESERVO-01) = 650 rpm.

• Pull CarriageFast Speed (both directions) = 26.2 ips.Slow Speed (both directions) = 9.4 ips.Encoder RPM = 350 rpm (fast), 125 rpm (slow).Motor (p/n 011-020) = 263 rpm (fast), 166 (slow).

• Prefeed RollersRoller surface speed = 13.3 ips.Motor (p/n AP-22E-103) = 255 rpm.

• Fold RollersRoller surface speed = 10 ips.Motor (p/n AP-22E-103) = 95.5 rpm.

• Feed/Spreader RollersRoller surface speed = 30 ips.Motor (p/n 011-020) = 285 rpm.


997K

Recommended Spare Parts

QTY PART NUMBER DESCRIPTION1 1278-7055A Proximity Sensor1 1278-7055B Proximity Sensor1 4080-110 Quad Input Module1 4080-130 Opto-Iso Output Module1 4080-140 Quad Output Module1 97-3107 Lower Blade1 97-3109 Upper Blade3 97-5513 Vacuum Gasket1 A-2014-39 Switch1 AAEDZ80-1 Sensor1 AAEHSKQ Cylinder Sensor4 AAQSU-4-4 ¼ Union4 AAQSU-5-5 5/32 Union

10’ AATP4-1 ¼ Air Line10” AATP5/32 5/32 Air Line1’ EEFE-RR2 Reflective Tape1 EENC256 Encoder1 EEVX10C1-M Switch1 FFSM312LVQ Photo-Electric Eye1 GG150L050 Timing Belt1 GG1590L100K Timing Belt1 GG160XL037 Timing Belt


997K

M

)

Timing Sequence Chart

aterial Feed and Pulloff Station:Carousel home, knife up, & pull carriage home sensors are true, and pull station materialpresence sensor is false. Machine is in automatic mode.

Pull position cylinder turns on.Pull position down sensor is energized.

Pull carriage motor turns on in reverse direction for fixed travel.Pull carriage motor stops.Pull gripper cylinder turns on.

Pull gripper up sensors are energized (left and right).Clamp cylinder turns on.WTSPull carriage motor turns on in pull direction.Unfolded length counter starts.Feeder motor turns on.

Spreader full switch is energized.Feeder motor turns off.(whenever material feed switch is false during pull task, feeder motor turns on

Prefeed slack sensor is false.Prefeed motor turns on.

Prefeed sensor is true.Prefeed motor turns off

After 2" of unfolded length counterSpreader lift cylinder turns on.

3 inches before unfolded length counter is reached. (Pull Carriage Stop Delay)Pull carriage motor slows down.Knife lift cylinder turns on.

Unfolded length counter is reached (plus pull length adjustment value).Pull carriage motor stops.WTS

Knife lift up sensor is energized and pull carriage motor is off.Cutoff knife cylinder turns on.

Knife down sensor is energized.


997K

M

Cutoff knife cylinder turns off.

Timing Sequence Chart (continued)

Clamp cylinder turns off.WTS 50 msPull gripper cylinder turns off.

Knife up sensor is energized.Knife lift cylinder turns off.Spreader lift cylinder turns off.

Pull gripper down sensor is energized.Pull carriage motor turns on in the forward direction for 1.5", then stops.WTSPull position cylinder turns off.

Pull position up sensor is energized.Pull carriage motor turns on in the reverse direction.

Pull carriage home sensor is energized.Pull carriage motor turns off.

aterial Fold Station:Carousel home and fold roller home sensors are true and fold station material presence sensor is false. Machine is in automatic mode.

Fold roller cylinder is turned on.Fold roller in sensor is energized.

Vacuum cylinder is turned on.WTSFold roller motor turns on.Folding time counter is started.

Folding time counter is reached.Fold roller motor turns off.Vacuum cylinder is turned off.WTSFold roller cylinder is turned off.


997K

U-


nload Station:Carousel home, unload pivot, and unload position home sensors are true and unload station material presence sensor is false. Machine is in automatic mode.

Unload position cylinder turns on.Unload position in sensor is energized.

Unload gripper cylinder turns on.Wait 50 ms.Unload carriage out turns on.

Unload station material presence sensor detects end of sleeve.Unload carriage out delay starts.

End of unload carriage out delay.Unload carriage out turns off.Unload pivot cylinder turns on.

Unload pivot out sensor is energized.WTSUnload carriage in turns on.

Unload carriage home sensor is energized.Unload gripper cylinder turns off.Unload gripper jet turns on.WTSUnload position cylinder turns off.

Unload position home sensor is energized.Unload gripper jet turns off.Unload pivot cylinder turns off.

Unload task completes and unload pivot home sensor is energized.Sleeve flip cylinder turns on for "Sleeve Flip On Time"

End of "Sleeve Flip On Time"Sleeve flip cylinder turns off.Sleeve transfer cylinder turns on for "Sleeve Transfer On Time".


997K

C

End of "Sleeve Transfer On Time"Sleeve transfer cylinder turns off.

Sleeve transfer home sensor is energizedWTSBundle lift cylinder turns on.


Bundle lift up sensor is energized (not at limit of cylinder)Bundle hold cylinder turns on.Bundle hold cylinder on time starts.

Bundle hold cylinder on time ends.Bundle hold cylinder turns off.

Bundle hold home sensor is energizedBundle lift cylinder turns off.

arousel Indexing Station:Pull position up sensor, fold roller home sensor, unload pivot home sensor, unload posi-tion home, and carousel home sensor are true. Machine is in automatic mode.

Carousel servo motor is turned on.Carousel home sensor is energized.

Carousel servo motor is turned off.


997K

Assembly Drawings And Parts List

Atlanta Attachment Company 15(770)963-7369 FAX (770)963-7641

997K

997K Main Assembly


997K

123456789

1111

997K Parts List

PART # DESCRIPTION QTY PG PART # DESCRIPTION QTY PG97-1000K1 Stand Assy 1 18 14 97-6502 Spreader,Stacking AR97-1000K2 Covers And Guards 1 20 15 97-6502A Spreader,Stacking AR97-1300K Vacuum Assy 1 22 16 97-6502B Spreader,Stacking, AR97-1600K Electrical/Pneumatic Pnl 1 24 17 97-6502C Spreader,Stacking, AR97-1660K Servo Control Panel 1 26 18 97-6560K Unload Pivot Cylinder 197-2400K Prefeed Puller Assy 1 28 19 97-6570K Unload Tray Assy 1 3797-3300K Spreader/Feed Assy 1 30 20 97-6700K Stacker Assy 1 4697-5200K Pull Carriage Assy 1 34 21 97-8100K Spreader 1 4897-5250K Puller & Encoder Assy 1 33 22 997K-PD Diagram,Pneumatic AR 50

0 97-5260K Pull Carriage Drive 1 38 23 997K-WD Diagram,Wiring AR 491 97-5270K Pull Gripper Assy 1 40 24 SSZS93032 Screw,Sheet Metal 82 97-5600K Fold Roller Assy 1 42 AAC Drawing Number 192315C Rev. 13 97-6500K Unloader/Stacker Assy 1 44


997K

97-1000K1 Stand Assembly


997K

1111111111222

97-1000K1 Parts List

PART # DESCRIPTION QTY PG PART # DESCRIPTION QTY PG1 97-1000K3 Stand Sub-Assy 1 23 4080-110 Module,Quad Input 12 97-1700 Touch Screen Assy 1 24 4080-150 Module,Program 13 97-5237 Sensor,Mntg Home 1 25 4080-970 Module, Memory 14 1278-7055B Prox Switch 1 26 4080-980 Module, Sbus-Cont 15 97-1250 Trough 2 27 97-1284 Top,Box 16 97-1251 Bottom,Trough 1 28 WWL10 Washer,Lock,10 27 FFSM312LVQ Eye,Electric,10-30vdc 4 29 WWFS10 Washer,Flat,Sae 58 A-U1 Block,Cross 3 30 WWF2 Washer,Flat,2 19 97-1253A Brkt,Sensor Mounting 3 31 WWFS6 Washer,Flat,Sae 40 97-1286 Tube,Air 1 32 WWFS1/4 Washer,Flat,Sae 21 1278-7154A Clamp, 1/8 Tube 1 33 SSFC01048 Screw,Flat Allen 32 AP-28-800Z Cntrl Bx,Stepper Mtr 1 34 SSZS93032 Screw,Sheet Metal 273 97-1254 Cover,End 1 35 SSPS50032 Screw,Pan Hd Slot 14 MM9600K21 Grommet, Rubber 2 36 SSBC98024 Screw,Button Cap 125 AA198-5110 Filter/Regulator/Lckout 1 37 SSHC01032 Screw,Hex Cap 66 AAQMC-3-4 Male Connector 2 38 SSSC98032 Screw,Socket Cap 37 EEDF1X1 Duct,Wire,1x1 26' 39 SSSC80048 Screw,Socket Cap 48 EEDF2X2 Duct,Wire,2.25x2.25 5' 40 SSHC01064 Screw,Hex Cap 29 EEDC1LG Duct,Wire Cover,1" 26' 41 SSPS98024 Screw,Pan Hd Slot 110 EEDC2X2 Cover,Wire Duct 5' 42 SSTP80016 Screw,Truss Hd 41 MM9280K33 Grommet, Flange, 3 AAC Drawing Number 192287C Rev. 02 97-1283 Bottom,Box,Plain 1


997K

97-1000K2 Covers And Guards


997K

11111111112222222222

97-1000K2 Parts List

PART # DESCRIPTION QTY PG PART # DESCRIPTION QTY PG1 AP-1721B Base,Stand 1 30 97-1280 Strip,Sliding Dr 12 97-1711 Tube,3/4x30x1/8 1 31 97-1281 Strip,Sliding Dr 13 28201 Block,Cross 2 32 97-1275 Door,Front Left 14 97-1255 Rod,Material Sup 1 33 97-1276 Door,Back Left 15 97-1289 Disc Assy 2 34 SSZS93032 Screw,Sht Mtl 226 97-1256 Door,Electrical Pnl 1 35 97-1277 Handle,3" 47 97-1257 Cvr,Fold Station 1 36 97-1287 Cvr,Rotry Ac 18 97-1258 Door,End 1 37 97-1292A Cer,Drive Chn 19 97-1259 Door,Lower Rt R 1 38 97-1290 Brace,Shipping 10 97-1260 Door,Lower Lft R 1 39 97-1291A Brace 11 97-1261 Cvr,Vac Valve 1 40 MM1676A12 Catch, Mag Dr 42 97-1282 Cvr,Blower 1 41 MM1910A43 Ruler 13 97-1285 Door,Unload 1 42 NNK10-32 Nut,Kep,10-32 84 MM40450010 Fastener,Slide Lock 5 43 WWFS10 Washer 705 97-1262A Grd Frm Weldmnt 1 44 WWF4 Washer 166 97-1262L Tab,Guard Mntg 4 45 SSBC01032 Screw,Button 167 MM132-1496 Rect End Cap 5 46 SSBC01096 Screw,Button 18 97-1263 Panel,Infeed 1 47 SSBC80012 Screw,Button 369 97-1264 Cvr,Pulley 1 48 SSFC01048 Screw, Allen 30 97-1265 Cvr,Spreader 1 49 SSFC90024 Screw, Allen 261 97-1266 Panel,Top 2 50 SSFC90032 Screw, Allen 82 97-1267 Panel,End 1 51 SSPP98024 Screw,Pan Hd 543 97-1268 Door,Front Right 1 52 SSPP98032 Screw,Pan Hd 84 97-1269 Door,Back Right 1 53 SSPS70016 Screw,Pan Hd 165 97-1271 Strip,Mounting 2 54 SSPS70032 Screw,Pan Hd 86 97-1278 Strip,Sliding Door 1 55 A-2014-39 Micro Switch 47 97-1279 Strip,Sliding Door 1 56 SSBC98024 Screw,Button 58 97-1272 Strip,Mounting 1 57 97-1270 Panel,Servo 19 97-1273 Strip,Mounting 1 AAC Drawing Number 192288C Rev. 0


997K

97-1300K Vacuum Components


997K

123456789

101112

97-1300K Parts List

PART # DESCRIPTION QTY PG PART # DESCRIPTION QTY PG97-1210 Plate,Cylinder Mnt 1 13 NNE8-32 Nut,Elastic 297-1221A Seal,Valve Gate 1 15 NNK10-32 Nut,Kep 497-1230 Adapt, Vac Gen 1 14 NNK1/4-20 Kep Nut 297-1301 Vacuum Flange 1 16 SSHC35064 Screw,Hex 497-1302 Valve Body Assy 1 17 SSSC01032 Screw,Socket 697-1304 Support,Vac Fl 1 18 SSSC90144 Screw,Socket 2AA198RA408 Flow Control 2 20 WWFS10 Washer,Flat,Sae 4AAC7D-2 Cylinder,Air,Da 1 19 WWFS1/4 Washer,Flat,Sae 8EE1234/16 Strain Relief Cord 1 21 WWFS3/8 Washer,Flat,Sae 4MM2BH141AV29Z Blower,Regen 1 22 WWL3/8 Washer,Lock,3/8 4MM5415K19 Clamp,Hose 5 AAC Drawing Number 192300C Rev. 0MMFH200 Hose,Flex 2" 4'


997K

97-1600K Control Panel


997K

123456789101112131415161718192021222324252627

97-1600K Parts List

PART # DESCRIPTION QTY PG PART # DESCRIPTION QTY PG0411-1503 Shelf, Motor Box 2 28 FF264-341 Termblk,Wago 80411-1505 Brkt,Stepper Box 2 29 FF264-347 Termblk, Wago 433009003 Brace,Left Side 1 30 FF264-371 Termblk,Wago 533009004 Brace,Right Side 1 31 FF3120L420A Circuit Breaker 140-321 Plate,Power 1 32 FFHBL4585C Receptacle 240-322 Bottom Ac Power 1 33 FFRAV781BW Module, Tvs 140-323 Top, Ac Powe 1 35 NNK8-32 Kep Nut 24080-110 Module,Quad In 6 36 SSFC80032 Screw,Flat Allen 84080-140 Module,Quad Out 5 37 SSPS70032 Screw,Pan Hd 24080-990 Box, Power Sup 1 38 SSPS80024 Screw,Pan Hd 497-1670 Panel,Control 1 39 SSPS80112 Screw,Pan Hd 2AAE997K-12 Valve Set 1 40 SSPS90032 Screw,Pan Hd 6AAESY7420 Solenoid,3 Pos 1 41 SSPS98024 Screw,Pan Hd 8AAQBU-4-4 Bulkhead Union 1 42 SSPS98032 Screw,Pan Hd 8AAQME-4-4 Qu. Male Elbow 3 43 SSSC90024 Screw,Socket 4AAQME-5-10 Qu. Male Elbow 1 44 SSSC90032 Screw,Socket 9AAQMF-144 Air Manifold 1 45 SSSC90064 Screw,Socket 2AAVF51FM1B Pressure Sw 1 46 SSSC98032 Screw,Socket 8AP-28-800SS Cont Box,Dual 1 47 TT5811 Terminal,Ring 2AP-28-800W Cntrl Box,Step Mtr 1 48 TTAA5267 Terminal,.187 Fully 8EEAD42BS Rivet,Blind,Domed 2 49 WWFS10 Washer,Flat,Sae,10 10EECA491024 Contactor, 240v 2 50 WWF8 Washer,Flat,8 14EECT460 Relay 2 51 WWL10 Washer,Lock,10 8EEDC2X2 Cover,Wire Duct 5' 52 WWL8 Washer,Lock,8 6EEDF2X2 Duct,Wire 5' 53 97-1674 Cable Set (Not Shn) 1FF1724 Strain Relief 6 AAC Drawing Number 192289C Rev. 0FF264-311 Termblk,Wago 5


997K

97-1660K Servo Control Panel


997K

97-1660K Parts List

PART # DESCRIPTION QTY PG PART # DESCRIPTION QTY PG1 97-1661A Enclosure Weld 1 17 FF261-331 Block,Terminal 12 EESERVO-02 Controller 1 18 FF261-361 End Cap 13 SSPS98024 Screw,Pan Hd 8 19 SSSS70016 Screw, Socket 24 WWFS10 Washer,Flat 8 20 MM9280K33 Grommet, Flange 25 AAEVQZ2121 Valve,Body 1 21 SSHC01096 Screw,Hex Cap 46 SSSC90024 Screw,Socket 2 22 WWL1/4 Washer,Lock,1/4 47 AAQME-4-8 Quick Male Elbow 1 23 WWFS1/4 Washer,Flat 48 FF264-341 Termblk,Wago 2 24 97-1663A Door,Servo Enc 19 FF264-347 Termblk, Wago 1 25 MM40450010 Fastener,Slide 110 FF264-371 Termblk,Wago 1 26 4080-4303 Cable,Dir 111 EEDC2X2 Cover,Wire Duct 2' 27 4080-4508 Cable,Step Mtr 112 EEDF2X2 Duct,Wire 2' 28 4080-4503 Outputs,Servo 113 4080-110 Module,Quad In 1 29 4080-4504 Inputs,Servo 114 4080-130 Module,Quad Opt 2 30 12788-504 Cable,Prox Sw 115 4080-140 Module,Quad Out 1 AAC Drawing Number 192290C Rev. 016 FF1724 Strain Relief 3


997K

97-2400K Puller Assembly


997K

97-2400K Parts List

PART # DESCRIPTION QTY PG PART # DESCRIPTION QTY PG1 97-2440 Mount,Motor 1 19 NNE5/16-18 Nut,Elastic 22 97-2404A Puller,Mnting Brkt 1 20 NNH10-32 Nut,Hex,10-32 43 97-2405A Base,Main Puller 1 21 PR32 Roller,3",Rubber 44 97-2407 Arm,Pivot 1 22 RRE38C Spring, Expansion 25 97-2430 Shaft,Flatted 1 23 SSAS024032 Screw,Allen 26 97-2431 Shaft,Flatted 1 24 SSSC01048 Screw,Socket 127 97-2432 Gear,Puller 2 25 SSSC98048 Screw,Socket 48 97-2433 Guard,Puller 1 26 SSSC98024 Screw,Socket 49 97-2434 Guard,Top Gear 1 27 SSBC98016 Screw,Button 4

10 97-2435 Plate,Mat Slide 1 28 WWF10 Washer,Flat,10 411 BBNTA613 Bearing,Thrust 4 29 WWF1/4 Washer,Flat,1/4 1612 BBTRA613 Washer,Thrust,Stl 8 30 WWL10 Washer,Lock,10 413 CC2X568 Collar,Set,1/2" 4 31 WWL1/4 Washer,Lock,1/4 1214 AP-22E-103 Step Motor,Mod 1 32 WWF5/16 Washer,Flat,5/16 215 MMBFM500B Brg Self Align 2 33 SSSC90040 Screw,Socket 416 MML050 Spider 1 34 WWF8 Washer,Flat,8 417 MML050-250 Coupling Body 1 35 NNK8-32 Kep Nut 418 MML050-500 1/2" Bore Cpling 1 36 97-2554 Base Mount 1

37 97-2553 Base Mount 1AAC Drawing Number 192301C Rev. 1


997K

97-3300K Spreader/Feed Assembly


997K

97-3300K Parts List

Items 51-96 are on the next page.

PART # DESCRIPTION QTY PG PART # DESCRIPTION QTY PG1 97-3453 Plate,Side 1 26 BB4L4F Bearing,Nyliner 22 97-3454 Plate,Side 1 27 97-3370 Bar,Spr Sup 13 97-3455 Plate,Base 1 28 97-3343 Roller,Spreader 24 97-3390 Roller,Idler 1 29 97-3456 Mount,Cylinder 25 97-3376 Shaft,Idler Roller 1 30 98209012 Screw,Modified 26 97-3364 Arm,Pivot,Rh 1 31 AT604-03 Bearing,Rod End 27 97-3365 Arm,Pivot,Lh 1 32 97-3457 Mount,Cylinder 28 97-3372 Rod,St,Crs 1 33 97-3150 Roller,Bottom 19 97-3393 Roller,Drive 2 34 97-3458 Shaft 110 97-3396 Shaft 1 35 97-3460 Brkt,Sens Mnt 111 97-3397 Brace 1 36 CCCL8F Collar,Clamp 212 97-3378 Guard,Spreader 1 37 CCCL10F Collar,Clamp 513 97-3400 Gear,Spur,Assy 2 38 AAFCT-7 Clevis,Air Cyl 114 97-3362 Shaft,Drive Roller 1 39 AAC7DP-1 Cylinder,Air,Da 115 97-3384 Pivot Arm Ass 1 40 AA198RA508 Flow Control 616 97-3386 Mount,Cyl 1 41 AAV41V Valve,Toggle 117 97-3242 Guard 1 42 AAQME-5-8 Quick Male El 318 97-3357 Brkt,Mtg 1 43 EEVX80C1 Switch 119 97-3358 Weldment, Switch 1 44 EEVX10C1-M Switch, Mod 120 1975-412A Nut Plate 1 45 MML050 Spider 121 011-020 Stepper Motor 1 46 MML050-500 1/2" Bore Cplng 122 97-3363 Brkt,Mtr Mnt 1 47 MML050-375 Coupling Body 123 0411-016 Nut Plate 1 48 CCCL4F Collar,Clamp 424 97-3366 Cover 1 49 AACF0091-1 Cyl,Bimba 225 97-3452 Brkt,Pivot 2 50 1278-7055B Prox Switch 2


997K

97-3300K Parts List (continued)

PART # DESCRIPTION QTY PG PART # DESCRIPTION QTY PG51 NNH10-24 Nut,Hex,10-24 1 75 SSHC01040 Screw,Hex 252 CCCL6F Collar,Clamp, 2 76 SSHC01048 Screw,Hex 853 NNE10-32 Nut,Elastic 2 77 SSSC10080 Screw,Socket 254 NNJ5/16-24 Nut,Jam 2 78 97-3344 Nut,Adj,R.H. 155 NNH2-56 Nut,Hex,2-56 2 79 SSHC10064 Screw,Hex 456 WWL1/4 Washer,Lock 18 80 SSPS50032 Screw,Pan Hd 257 WWF1/4 Washer 4 81 SSSC01048 Screw,Socket 1058 WWL8 Washer,Lock 2 82 SSSC70040 Screw,Socket 259 WWL10 Washer,Lock 10 83 SSSC70048 Screw,Socket 560 WWF10 Washer, 2 84 SSSC90032 Screw,Socket 261 WWL4 Washer,Lock 2 85 SSSC95024 Screw,Socket 262 WWF4 Washer 4 86 SSSC98032 Screw,Socket 263 WWSE10 Washer 1 87 SSSC98048 Screw,Socket 464 WWFS1/4 Washer,Flat 8 88 SSSC98096 Screw,Socket 265 WWL5/16 Washer,Lock 6 89 SSSS01016 Screw,Skt Set 466 WWFS5/16 Washer,Flat,S 4 90 SSSS01024 Screw,Skt Set 267 WWB10S Washer,Brass 4 91 SSSS90016 Screw,Skt Set 268 WWF5/16 Washer,Flat 2 92 SSBC98020 Screw, Button 269 WWFS10 Washer,Flat 2 93 97-3461 Rod,Stra,Crs, 170 WWF2 Washer,Flat 2 94 97-3346 Nut, Adj, L.H. 171 SSAS016032 Screw,Allen 1 95 97-3462 Screw,Adj 172 SSAS016040 Screw,Allen 1 96 97-3463 Bar,Tie 173 SSFC01040 Screw,Flat 2 AAC Drawing Number 192291C Rev. 074 SSFC01064 Screw,Flat 2


997K

97-5250K Pulley And Encoder Assembly

97-5250K Parts List

PART # DESCRIPTION QTY PG PART # DESCRIPTION QTY PG1 97-5247 Brkt,Pulley 1 9 WWFS10 Washer,Flat,Sae 42 BB1L005 Bearing,Ball 2 10 CCCL6F Collar,Clamp 13 BBTRA815 Washer,Steel 2 11 EENC256 Encoder,Sbus 14 98203012 Pulley,12 T 1 12 33004080 Brkt,Enc Support 15 GG1590L100K Belt,Gear 1 13 SSAS016080 Screw,Allen 16 97-5233 Shaft,Idler 1 14 SSSC95064 Screw,Socket 47 IIS012X064 Spring Pin 1 15 SSPS98016 Screw,Pan Hd 28 WWL10 Washer,Lock 4 AAC Drawing Number 192293C Rev. 0


997K

97-5200K Pull Carriage Assembly


997K

97-5200K Parts List

PART # DESCRIPTION QTY PG PART # DESCRIPTION QTY PG1 4080-110 Module,Quad In 2 26 MMCCFE3/4S Cam Follower 22 4080-140 Module,Quad Out 1 27 MMCPL100 Clamp,Gear Belt 13 97-5213 Angle,Car Mntng 2 28 NNJ3/8-24 Nut,Jam,3/8-24 44 97-5214 Mount,Cylinder 1 29 WWF1/2 Washer,Flat,1/2 25 97-5218 Mount,Cylinder 1 30 WWF10 Washer,Flat,10 26 97-5225 Bar,Tie 1 31 WWF8 Washer,Flat,8 147 97-5227 Bar,Tie 1 32 WWFS1/4 Washer,Flat,Sae 48 97-5228 Holder,Belt 1 33 WWFS10 Washer,Flat,Sae 109 97-5235 Box Bottom 1 34 WWFS3/8 Washer,Flat,Sae 4

10 97-5238 Top,Box 1 35 WWL1/4 Washer,Lock,1/4 411 97-5239 Brkt,Mounting 1 36 WWL10 Washer,Lock,10 1212 97-5242 Brkt,Mounting 1 37 WWL3/8 Washer,Lock,3/8 213 97-5243 Support,Kabel 1 38 WWL8 Washer,Lock,8 1414 AA198RA510 Flow Control 4 39 SSBC01048 Screw,Button 215 AACMRS-087 Switch,Reed 2 40 SSHC01096 Screw,Hex Cap 416 AACUGS023 Cylinder,Air 2 41 SSPS80020 Screw,Pan Hd 417 AAE211P-3 Solenoid Assy 1 42 SSPS98024 Screw,Pan Hd 818 BBTRA815 Washer,Steel 2 43 SSSC90040 Screw,Socket 819 EEDF2X2 Duct,Wire .4' 44 SSSC90048 Screw,Socket 420 EEDC2X2 Cover,Wire Duct .4' 45 SSSC90064 Screw,Socket 221 MM18222837 Duct,Wire 2 46 SSSC90080 Screw,Socket 422 MM360C Roller,V-Rail 2 47 SSSC95040 Screw,Socket 823 MM360E Roller,V-Rail 2 48 SSSC98072 Screw,Socket 824 MM9280K33 Grommet, Flange 2 49 SSTP80016 Screw,Truss Hd 425 MMCCF3/4SB Cam Follower 2 AAC Drawing Number 192292C Rev. 0


997K

1

97-6560K Unload Pivot Cylinder Assembly

97-6560K Parts List

PART # DESCRIPTION QTY PG PART # DESCRIPTION QTY PG1 CCCL4F Collar,Clamp 2 11 97-6578 Mount,Pivot Brkt, 12 BBAW-4 Bearing,Rod End 1 12 029-003A Nut Plate,1/4-20 13 273-4-503 Washer,Leather 1 13 WWL1/4 Washer,Lock,1/4 24 BBTRA411 Washer,Steel 1 14 WWF1/4 Washer,Flat,1/4 25 NNJ1/4-28 Nut,Jam,1/4-28 1 15 AAEHSKQ Switch, Hall Effect 26 AACM062.5DXP Cylidner,Air 1 16 AAFD35456-8 Band for switch 27 AA198RA408 Flow Control 2 17 SSSC98032 Screw,Socket Cap 28 AAFBP-11C Brkt,Pivot 1 18 SSSC01064 Screw,Socket Cap 29 WWFS10 Washer,Flat 2 AAC Drawing Number 192304C Rev. 00 NNK10-32 Nut,Kep 2


997K

97-6570K Unload Tray Assembly

97-6570K Parts List

PART # DESCRIPTION QTY PG PART # DESCRIPTION QTY PG1 AACS32 Actuator,Rot 1 13 97-6580 Brkt,Rot Act Mtng 12 AA198RA408 Flow Control 2 14 SSSC01040 Screw,Socket Cap 53 WWL10 Washer,Lock 8 15 97-6524A Brkt,Bumper Mntng 14 31103006 Clamp,Stop 1 16 SSSC95032 Screw,Socket Cap 45 AAOEM.25B Shock Absorb 2 17 SSPS80012 Screw,Pan Hd 126 NNJ1/2-20 Nut,Jam 2 18 SSHC01112 Screw,Hex Cap 27 97-6521B Trough 1 19 97-6521C Pin,Trough Pivot 28 97-6521E Rib, Trough 3 20 3524 U Joint 19 97-6579 Brkt,Trough 1 21 SSPS98032 Screw,Pan Hd 4

10 WWF1/4 Washer,Flat 4 22 WWP096A Washer Plate 211 WWL1/4 Washer,Lock 7 AAC Drawing Number 192305C Rev. 012 NNH1/4-20 Nut,Hex 2


997K

97-5260K Pull Carriage Drive Assembly


997K

97-5260K Parts List

PART # DESCRIPTION QTY PG PART # DESCRIPTION QTY PG1 97-5230 Plate,Drive Base 1 12 97-5229 Shaft,Drive 12 97-5231 Mount,Motor 1 13 IIS012X064 Spring Pin 3/16 X 1 23 011-020 Stepper Motor 1 14 WWFS1/4 Washer,Flat,Sae 124 97-5234 Pulley,Drive 1 15 WWL1/4 Washer,Lock,1/4 45 GG150L050 Belt,Gear,3/8p 1 16 NNK1/4-20 Kep Nut 46 97-5232 Pulley,Drive 1 17 WWL10 Washer,Lock,10 47 98203011 Brkt,Pulley,Drive 1 18 SSSC98032 Screw,Socket Cap 48 BB1L005 Bearing,Ball,.500d, 2 19 SSSC01048 Screw,Socket Cap 49 BBTRA815 Washer,Thrust,Steel 2 20 SSFC95048 Screw,Flat Allen 4

10 SSPS98016 Screw,Pan Hd 2 21 SSHC01192 Screw,Hex Cap 411 98203012 Pulley,12 T 1 AAC Drawing Number 192294C Rev. 0


997K

97-5270K Pull Gripper Assembly


997K

97-5270K Parts List

PART # DESCRIPTION QTY PG PART # DESCRIPTION QTY PG1 97-5201 Gripper,Upper Rt 1 25 AAQME-5-10 Qu. Male Elbow 42 97-5202 Gripper,Lower Rt 1 26 BBTRA411 Washer,Thrust,Stl 23 97-5203 Mnt,Gripper Cyl 2 27 NNH10-32 Nut,Hex,10-32 24 97-5204 Mnt,Lower Grip 2 28 NNHM4X40M Nut,Hex,M4-0.7 45 97-5205 Jaw,Clamp 1 29 TTH32416 Handle,Threaded 26 97-5206 Clamp,Gripper 2 30 WWF10 Washer,Flat,10 47 97-5207 Mount,Cylinder 1 31 WWF8 Washer,Flat,8 128 97-5208 Jaw,Clamp 2 32 WWFS1/4 Washer,Flat,Sae 49 97-5209 Screw,Adj 1 33 WWFS10 Washer,Flat,Sae 4

10 97-5211 Plate,Grip Car 1 34 WWL1/4 Washer,Lock,1/4 411 97-5212 Bar,Clamp 4 35 WWL10 Washer,Lock,10 812 97-5215 Brkt,Scr Brg 1 36 WWL8 Washer,Lock,8 1213 97-5216 Brkt,Scr Brg 1 37 SSFC01048 Screw,Flat Allen 414 97-5217 Knob,Adj 1 38 SSFC01040 Screw,Flat Allen 815 97-5221 Gripper,Up Lt 1 39 SSFC90024 Screw,Flat Allen 416 97-5222 Gripper,Low Lt 1 40 SSFCM3X10 Screw,Flat Allen 417 97-5223 Clamp,Jaw 1 41 SSPSM4X40 Screw,Pan Hd 418 97-5240 Clamp,Upp Right 1 42 SSSC01064 Screw,Socket 419 97-5241 Clamp,Up Left 1 43 SSSC90040 Screw,Socket 420 97-5245 Mount,Cylinder 1 44 SSSC95024 Screw,Socket 821 97-5246 Cylinder,Mod 2 45 SSSS98016 Screw,Skt Set 422 AA198RA510 Flow Control 4 46 SSSS98012 Screw,Skt Set 423 AACNR02.5-D Cylinder,Air 2 AAC Drawing Number 192295C Rev. 024 AAEDZ80 Reed Switch 4


997K

97-5600K Fold Roller Assembly


997K

111111111122222222223

97-5600K Parts List

PART # DESCRIPTION QTY PG PART # DESCRIPTION QTY PG1 1277-008 Nut Plate 3 31 AP-22E-103 Step Motor 12 24036 Gear Pulley 4 32 BB2281288 Ball,Bearing 43 273-4-503 Washer,Leather 1 33 BBNTA1220 Bearing,Thrust 24 97-5602 Shaft,Roller 2 34 BBTRA1220 Washer,Thrst,Stl 65 97-5626 Roller,Fold 2 35 CCCL12F Collar,Clamp 36 97-5603 Mount,Roller 2 36 CCCL4F Collar,Clamp 17 97-5604 Arm,Roller,Inside 1 37 GG160XL037 Belt,Gear 28 97-5605 Gear,Modified 2 38 MMBE75 Ring,Retaining 29 97-5606 Spacer 2 39 NNH1/4-28 Nut,Hex,1/4-28 10 97-5607 Block,Mounting 1 40 NNK10-32 Nut,Kep,10-32 21 97-5608 Mount,Arm 2 41 WWFS1/4 Washer,Flat,Sae 142 97-5609 Shaft,Drive 2 42 WWFS10 Washer,Flat,Sae 143 97-5611 Clevis 1 43 WWL1/4 Washer,Lock,1/4 144 97-5612 Link 2 44 WWL10 Washer,Lock,10 105 97-5613 Mount,Motor 1 45 WWL8 Washer,Lock,8 66 97-5614 Arm,Roller,Out 1 46 SSSC98128 Screw,Socket 27 97-5615 Gear,Modified 1 47 SSSC98040 Screw,Socket 48 97-5616 Plate,Side 2 48 SSSC98032 Screw,Socket 29 97-5617 Standoff 2 49 SSSC98024 Screw,Socket 40 97-5618 Mount,Cylinder 1 50 SSSC90040 Screw,Socket 21 97-5619 Brkt,Inside Mntng 1 51 SSSC90032 Screw,Socket 42 97-5620 Brkt,Lower 1 52 SSSC01064 Screw,Socket 63 97-5621 Brkt,Upper 1 53 SSAS020024 Screw,Allen 24 97-5622 Cover,Timing Blt 2 54 SSSC01048 Screw,Socket 165 97-5623 Guard,Gear 1 55 SSFC98032 Screw,Flat Allen 86 AA198RA408 Flow Control 2 56 SSBC90016 Screw,Button 87 AACM041D Cylinder 1 57 SSBC01024 Screw,Button 28 AAEHSKQ Switch 2 58 SSAS020032 Screw,Allen 29 AAFD-129 Brkt,Mounting 1 59 WWF8 Flat Washer 20 AAFD35456-6 Band for switch 2 AAC Drawing Number 192298C Rev. 0


997K

97-6500K Unloader Assembly


997K

11111111112222222222333333

97-6500K Parts List

PART # DESCRIPTION QTY PG PART # DESCRIPTION QTY PG1 1278-7154A Clamp, 1/8 Tube 1 36 MM9544K19 Bumper,Stem 42 97-6501 Finger,Gripper 4 37 MMCCF3/4SB Cam Follower 23 SSSCM5X14 Screw,Socket 4 38 MMCCFE3/4S Cam Follower 14 SSPS98024 Screw,Pan Hd 2 39 NNH10-24 Nut,Hex,10-24 45 97-6571 Mount,Gripper 2 40 NNJ3/8-24 Nut,Jam,3/8-24 36 97-6504 Plate,Gripper 1 41 NNK1/4-20 Kep Nut 47 97-6505 Angle,Gripp Mnt 1 42 NNK10-32 Kep Nut 48 97-6506 Plate,Adapter 1 43 TTH32416 Handle,Thrd 19 97-6572 Support,Spread 1 44 WWF1/4 Washer,Flat 20 97-6573 Shaft,Pivot 1 45 WWF10 Washer,Flat 51 97-6511 Support Weld 1 46 WWF5/16 Washer,Flat 82 97-6574 Hanger,Sprd 2 47 WWFS1/4 Washer,Flat,Sae 83 97-6575 Stabilizer,Sprd 1 48 WWFS10 Washer,Flat,Sae 234 97-6576 Shield,Lower 1 50 WWFS3/8 Washer,Flat,Sae 45 97-6577 Shield,Upper 1 51 WWL1/4 Washer,Lock, 56 97-6516 Block,Pivot 1 52 WWL10 Washer,Lock 207 97-6517 Mount,Follower 1 53 WWL3/8 Washer,Lock 48 97-6518 Bar,Follower 1 54 WWL5/16 Washer,Lock 89 97-6520A Switch,Mod 1 55 SSAS016024 Screw,Allen 20 97-6581 Tube,Air 1 56 SSAS016032 Screw,Allen 41 97-6582 Brkt,Mounting 1 57 SSHC10064 Screw,Hex 42 97-6583 Brkt,Mounting 1 58 SSPS80020 Screw,Pan Hd 43 97-6584 Plate,Washer 1 59 SSPSM2.5X6 Screw,Pan Hd 84 AA198-2201 Flow Control 2 60 SSPSM3X10 Screw,Pan Hd 45 AA198RA408 Flow Control 2 61 SSSC01048 Screw,Socket 36 AA2001F-03 Flow Cont,Inline 1 62 SSSC01064 Screw,Socket 27 AACMGPL2050 Cylinder,Dual Rd 1 63 SSSC01224 Screw,Socket 48 AACMHC2-10D Cylinder,Fulcrum 2 64 SSSC25064 Screw,Socket 19 AACUGS0430 Cylinder,Ai 1 65 SSSC80016 Screw,Socket 40 AAEDZ80-1 Reed Swith 2 66 SSSC95032 Screw,Socket 61 AAQMC-5-M3 Connector 4 67 SSSC98032 Screw,Socket 132 BBTT601 Bearin 2 68 SSSC98040 Screw,Socket 33 MM09067 Cone,Bearing 2 69 SSSC98112 Screw,Socket 44 MM09195AB Cup,Bearing 2 AAC Drawing Number 192299C Rev. 05 MM18222837 Duct,Wire 1


997K

97-6700K Stacker Assembly


997K

1111111

1112222

2222

97-6700K Parts List

PART # DESCRIPTION QTY PG PART # DESCRIPTION QTY PG1 97-6701 Stacker Frm Assy 1 28 WWL1/4 Washer,Lock 282 97-6702 Plate,Base 1 29 WWF10 Flat Washer 143 97-6703 Brkt,Index 1 30 WWL10 Washer,Lock 64 97-6704 Plate,Index 1 31 WWF1/4 Washer,Flat 25 97-6705 Brkt,Lift 1 32 WWFE016 Washer,Fen 26 97-6706 Plate,Lift 1 33 WWFS10 Washer,Flat 287 97-6707 Plate,Rod Holder 1 34 WWFS5/16 Washer,Flat 28 97-6708 Rod,Stacker 22 35 WWU1/2 Washer,Ure 39 97-6709 Plate 1 36 WWSI10 Washer,Int. Tth 40 97-6724 Support,Sleeve Hld 2 37 SSHC01160 Screw,Hex 81 97-6710 Plate,Nut 1 38 SSHC01112 Screw,Hex 22 97-6711 Brkt,Hold Cyl Mnt 1 39 SSSCM6X16 Screw,Socket 63 97-6712 Plate,Nut 1 40 SSFC98032 Screw,Flat 144 97-6719 Guard,Cylinder 1 41 SSFCM6X16 Screw,Flat 45 97-6720 Guard,Cylinder 1 42 SSSC95032 Screw,Socket 66 AACMGPM

25100Cylinder,Air 2 43 SSFCM6X20 Screw,Flat 4

7 AAEDZ80-1 Reed Swith 4 44 SSSC01080 Screw,Socket 28 AA198-2202 Flow Control 5 45 SSBC98032 Screw,Button 109 AAQME-4-8U Quick Male Elbow 1 46 SSHC10128 Screw,Hex 20 MM132-1496 Rect End Cap 2 47 SSBC98048 Screw,Button 21 AAVBG35A Coil Hose 1 48 SSW#1/4 Wing Screw 22 AAVBG35 Blow Gun 1 49 WWL5/16 Washer,Lock 23 AAQUT-4-4 Quick Union T 1 50 AACMGPM

25200Cylinder,Air 1

4 AAQMC-4-4 Quick Male Conn 1 51 SSSCM6X20 Screw,Socket 125 NNH1/4-20 Nut,Hex,1/4-20 12 52 97-6721 Brkt,Lift Cyl Mnt 16 NNK10-32 Nut,Kep,10-32 16 AAC Drawing Number 192302C Rev. 07 WWFS1/4 Washer,Flat 20


997K

97-8100K Spreader Assembly

97-8100K Parts List

PART # DESCRIPTION QTY PG PART # DESCRIPTION QTY PG1 97-8101 Plate,Bottom 1 6 SSFC80016 Screw,Flat Allen 22 97-8102 Bar,Mounting 1 7 SSSC80024 Screw,Socket 23 97-8103 Plate,Top 1 8 WWSI6 Washer,Int Tth 24 97-8308 Block,Anchor 1 AAC Drawing Number 192296C5 SSBC80016 Screw,Button 2


997K

997K-WD Wiring Diagram


997K

997K-PD Pneumatic Diagram


997K


manual no. zz997k automatic placket setting machine ... · pdf file97-6570k unload tray...

Documents