manual ps2000tl

　　　　

　-i- DPRTLR.01.01

　-ii- DPRTLR.01.01

Table of Contents Pag

e

I. B A S I C O P E R A T I O N 1

1. P2 MODE 12. P1 MODE 2

3. MENU SELECTION KEY 3 4. LCD OPERATOR DISPLAY

3 5. EXAMPLE OF SETTING 4

II. P R O G R A M M I N G A T ' P 2 ' P O S I T I O N 　 5

1. FIRST PROGRAMMING 　 5 (1) RAM CLEAR 　 5 (2) DATE 　 5 (3) TIME 　 5 (4) HEADER MESSAGE 　 5 (5) TAX RATE 　 6 (6) SET FISCAL MACHINE 　 6

2. OPTION FLAG PROGRAMMING 　 7 (1)Flag No.1 (DEPARTMENT FLAGS) 　 7 (2)Flag No.2 (DEPARTMENT FLAGS) 　 7 (3)Flag No.3 (PLU FLAGS) 　 8 (4)Flag No.4 (PLU FLAGS) 　 8 (5)Flag No.5 (PLU FLAGS) 　 9 (6)Flag No.6 (PLU FLAGS) 　 9 (7)Flag No.7 (PLU FLAGS) 10 (8)Flag No.8 (CASHIER/SERVER FLAGS) 10 (9)Flag No.9 (CASHIER/SERVER FLAGS) 11 (10)Flag No.10 (TAX FLAGS) 11 (11)Flag No.11 (TAX FLAGS) 12 (12)Flag No.12 (TAX FLAGS) 12 (13)Flag No.13 (ROUNDING/CALCULATION FLAGS) 13 (14)Flag No.14 (ROUNDING/CALCULATION FLAGS) 13 (15)Flag No.15 (Not used) 13 (16)Flag No.16 (ROUNDING/CALCULATION FLAGS) 13 (17)Flag No.17 (ROUNDING/CALCULATION FLAGS) 14 (18)Flag No.18 (ROUNDING/CALCULATION FLAGS) 14 (19)Flag No.19 (ROUNDING/CALCULATION FLAGS) 14 (20)Flag No.20 (ROUNDING/CALCULATION FLAGS) 15 (21)Flag No.21 (2X BAR CODE TYPE FLAG) 15 (22)Flag No.22 (EXTERNAL DISPLAY FLAGS) 16 (23)Flag No.23 (RECEIPT JOURNAL FLAGS) 16 (24)Flag No.24 (RECEIPT JOURNAL FLAGS) 16 (25)Flag No.25 (RECEIPT/JOURNAL FLAGS) 17 (26)Flag No.26 (RECEIPT/JOURNAL FLAGS) 17 (27)Flag No.27 (FOOD STAMP FLAGS) 18 (28)Flag No.28 (REPORT FLAGS) 18 (29)Flag No.29 (REPORT FLAGS) 19 (30)Flag No.30 (REPORT FLAGS) 19 (31)Flag No.31 (REPORT FLAGS) 20 (32)Flag No.32 (ERROR/INVALID/PROHIBIT OPERATION FLAGS) 20 (33)Flag No.33 (ERROR/INVALID/PROHIBIT OPERATION FLAGS) 21

　-iii- DPRTLR.01.01

(34)Flag No.34 (TRAINING OPERATION FLAGS) 21 (35)Flag No.35 (USER'S CHOICE OPERATION FLAGS) 22 (36)Flag No.36 (USER'S CHOICE OPERATION FLAGS) 22

　-iv- DPRTLR.01.01

Table of Contents

Page

2. OPTION FLAG PROGRAMMING 23 (37)Flag No.37 (USER'S CHOICE OPERATION FLAGS) 23 (38)Flag No.38 (USER'S CHOICE OPERATION FLAGS) 23 (39)Flag No.39 (USER'S CHOICE OPERATION FLAGS) 24 (40)Flag No.40 (Not used) 24 (41)Flag No.41 (02 BAR CODE TYPE FLAG) 24 (42)Flag No.42 (REPORT FLAGS) 25 (43)Flag No.43 (GUEST CHECK FLAGS) 25 (44)Flag No.44 (TRAINING MODE) 26 (45)Flag No.45 (GUEST CHECK FLAGS) 26 (46)Flag No.46 (Currency mark/Decimal point) 27 (47)Flag No.47 (USER'S CHOICE OPERATION FLAGS) 27 (48)Flag No.48 (SUBTOTAL AMOUNT FLAGS) 28 (49)Flag No.49 (SCALE FLAGS) 28

3. CHANGING KEY LAYOUT 29

*KEY POSITION NUMBER ON FLAT KEYBOARD 29

*KEY POSITION NUMBER ON CONVENTIONAL KEYBOARD 30

*DEFAULT KEYBOARD LAYOUT (FLAT KEYBOARD) 31 *DEFAULT KEYBOARD LAYOUT (CONVENTIONAL KEYBOARD) 32 *FUNCTION KEY CODE TABLE 33

4. CHANGING ALPHA KEY LAYOUT 34 *DEFAULT ALPHA KEY LAYOUT ON FLAT KEYBOARD 35 *DEFAULT ALPHA KEY LAYOUT ON CONVENTIONAL KEYBOARD 35 *ALPHA KEY CODE TABLE 36

5. CHANGING TRANSACTION DESCRIPTOR 37 *TRANSACTION DESCRIPTOR TABLE No.1 : ENGLISH 38

6. SETTING SERIAL PORT 39

7. BILL PRINTER FORMAT 40

8. PROGRAM VERSION DISPLAY 40

9. RAM COPY (IRC) 40

10. PORT TEST 41

11. SYSTEM RESET 41

12. SYSTEM RESET & DEFAULT KEYBOARD PROGRAMMING 41

　-v- DPRTLR.01.01

Table of Contents

Page

II. P R O G R A M M I N G A T ' P 1 ' P O S I T I O N 42

1. DEPARTMENT PROGRAMMING 42

2. PLU PROGRAMMING 45

3. PLU STOCK FILE PROGRAMMING 52

4. PLU LINKED STOCK FILE PROGRAMMING 53

5. PLU PRICE CHANGE 54

6. COMMERCIAL MESSAGE 54

7. DIRECT PLU KEY PROGRAMMING 55

8. SET MENU PROGRAMMING 58 9. COOKING INSTRUCTION PROGRAMMING 59

10. SERVER(CLERK)-ID NUMBER and NAME 60

11. MACHINE No. 61

12. REPORT P2 MODE PASSWORD 61

13. TAX RATE (TAX1 – TAX4) 62

14. LOCK OUT AMOUNT TABLE (HALO/LALO TABLE) 63

15. GROUP NAME for REPORT 64

16. DIRECT DEPT KEY WITH SHIFT PROGRAMMING 65

17. CASHIER NAME AND LINK DRAWER 66

18. PERCENTAGE DISCOUNT/ADD-ON KEY 67

19. AMOUNT DISCOUNT KEY 68

19.5 SUBTOTAL PERCENT PLUS KEY 69

20. CLOSING MEDIA KEY 70

21. OTHER FUNCTION KEY 71

22. FOREIGN CURRENCY 72

23. EURO PERIOD PRESET 72

24. REPORT CHAIN 73

25. MACRO KEY TABLE 73

　-vi- DPRTLR.01.01

26. PRINTING ITEM for CHECK PRINTING 74

27. CHECK FORMAT TABLE 74

　-vii- DPRTLR.01.01

Table of Contents

Page

28. KITCHEN PRINTER PROGRAMMING 76

29. MASTER/SLAVE TABLE (IRC) 77

30. TIME PROGRAMMING 78

31. DATE PROGRAMMING 78

32. TARE WEIGHT PRESET 78

33. START BILL No. PROGRAMMING 78

34. MODEM PRESET 79

35. ALL PRESET REPORT 80

36. PROGRAM VERSION DISPLAY 80

37. TRAINING MODE PASSWORD 80

　-viii- DPRTLR.01.01

Table of Contents

Page

III. S E R I A L I N T E R F A C E & C O N N E C T I O N S 81

1. INTER-REGISTER COMMUNICATION (IRC) 81

(1) INTERFACE SPECIFICATION for Inter-Register Communication 81 (2) INTRODUCTION of Inter-Register Communication 81 (3) PROGRAMMING with Inter-Register Communication 82

2. SCANNER CONNECTION 83

(1) INTERFACE SPECIFICATION for Barcode Scanner 83 (2) CONNECTION for Metrologic MS700 Projection Scanner 83 (3) CONNECTION for NIPPONDENSO BHS 6060 Hand Scanner 84 (4) CONNECTION for SCANTECH POLARIS P-7010 84 (5) Metrologic MS700 Scanner Dip Switch Settings 85 (6) SCANNING OPERATIONS 85 (7) 2X TYPE of BAR CODE 86 (8) 02 TYPE of BAR CODE 86

3. SCALE CONNECTION 87

(1) INTERFACE SPECIFICATION 87 (2) CONNECTION 87 (3) PROTOCOL 88

4. EXTERNAL PRINTER CONNECTION 89

(1) INTERFACE SPECIFICATION 89 (2) CONNECTION 89 (3) DIP SWITCH SETTINGS 89

5. EXTERNAL DISPLAY CONNECTION 90

(1) INTERFACE SPECIFICATION 90 (2) CONNECTION 90 (3) DIP SWITCH SETTINGS 90 (4) CONNECTION of EXTERNAL DISPLAY AND THE SCANNER 91

　-ix- DPRTLR.01.01

I. BASIC OPERATION

1. P2 MODE

This programming mode is used for important function level. Therefore don’t change in user side.

<P2> MODE : SPECIAL PROGRAMMING MODE

You can select following menu by using [SCRL-UP] and [SCRL DOWN] keys.

1. OPTION FLAG PROGRAMMING2. CHANGE KEY LAYOUT3. CHANGE ALPHA KEY LAYOUT4. CHANGE TRANSACTION DESCRIPTOR5. HEADER MESSAGE6. DATE PROGRAMMING7. TIME PROGRAMMING8. SETTING SERIAL PORT9. BILL PRINTER FORMAT10. VERSION NUMBER DISPLAY11. RAM CLEAR OPERATION12. I.R.C. RAM COPY13. SET FISCAL MACHINE14. PORT TEST

To enter to each programming mode, press [CASH] key after menu selection.

　-1- DPRTLR.01.01

SELECT PROGRAM ITEM RAM CLEAR OPERATION IRC RAM COPY

SELECT PROGRAM ITEM OPTION FLAG PROGRAM CHANGE KEY

2. P1 MODE

This programming mode is used for general user programming. <P1> MODE : USER PROGRAMMING MODE

You can select following programming menu by using [SCRL-UP] and [SCRL DOWN] keys.

1. DEPARTMENT PROGRAMMING2. PLU PROGRAMMING3. PLU QUICK PRICE CHANGE4. COMMERCIAL MESSAGE PROGRAMMING5. DIRECT PLU KEY PROGRAMMING6. PLU STOCK LINK PROGRAMMING7. SET MENU PROGRAMMING8. COOKING INSTRUCTION MESSAGE PROGRAMMING9. STOCK FILE CORRECTION10. STOCK FILE PROGRAM11. SERVER(CLERK) ID PROGRAMMING12. MACHINE NUMBER PROGRAMMING13. REPORT/P2 MODE PASSWORD PROGRAMMING14. TAX RATE PROGRAMMING15. LOCK OUT AMOUNT TABLE PROGRAMMING16. GROUP NAME PROGRAMMING17. DIRECT DEPT WITH SHIFT PROGRAMMING18. CASHIER PROGRAMMING19. %DISCOUNT AND % ADD-ON PROGRAMMING20. AMOUNT DISCOUNT PROGRAMMING21. CLOSING MEDIA PROGRAMMING22. OTHER FUNCTION KEY PROGRAMMING

R/A1-3, P/O1-3, VOID, ERRC, VOID, NOSALE, EXCHG, RETURN, PROMO 23. FOREIGN CURRENCY PROGRAMMING24. EURO PERIOD PRESET PROGRAMMING25. CHAIN REPORT PROGRAMMING26. MACRO KEY FUNCTION27. CHECK PRINT ITEM 28. CHECK PRINT FORMAT29. KITCHEN PRINTER PROGRAMMING30. MASTER SLAVE TABLE PROGRAMMING31. TIME PROGRAMMING 32. DATE PROGRAMMING33. TARE WEIGHT PRESET34. START BILL NUMBER (CONSECUTIVE #) PROGRAMMING35. MODEM PRESET36. P1 PRESETTING REPORT 37. VERSION DISPLAY38. TRAINING MODE PASSWORD SETTING

　-2- DPRTLR.01.01

SELECT PROGRAM ITEM DEPARTMENT PROGRAM PLU

SELECT PROGRAM ITEM P1 PRESET REPORT VERSION No.

3. MENU SELECTION KEY

In P1 and P2 mode, following six keys are used frequently.

Used for scrolling up menu items.

Used for scrolling down menu items.

Used for selecting each menu. Used for data setting. (Same as ENTER key on PC)

Used for returning to main menu and exit.

Used for returning one step.

Used for correcting wrong input data.

4. LCD OPERATOR DISPLAY

Operator display has frame of four lines and one line can indicate 20 characters. When control lock position is located in LOCK position, LCD back light is turned off.

　-3- DPRTLR.01.01

SELECT PROGRAM ITEM OPTION FLAG PROGRAM CHANGE KEY

5. Example: Changing option flag#3 value from 15 to 14

Enter TOTAL key to return to MAIN MENU

　-4- DPRTLR.01.01

SELECT PROGRAM ITEM OPTION FLAG PROGRAM

SELECT OPERATION DATA PRESET MODE

OPTION FLAG PROGRAM

ENTER FLAG No.1-

OPTION FLAG PROGRAM

ENTER FLAG No.1-

Current flag value is indicated.

OPTION FLAG PROGRAM

ENTER FLAG No.1-

OPTION FLAG PROGRAM

ENTER FLAG No.1-

SELECT PROGRAM ITEM OPTION FLAG PROGRAM

Input requested flag number and press [CASH] key

Enter new value and press [CASH] Key.

Press [CASH] key to select data preset mode.

Press [CASH] key to enterOption flag programming mode.

II. P R O G R A M M I N G A T ' P 2 ' P O S I T I O N

THE CONTROL LOCK KEY SHOULD BE TURNED TO 'P2' POSITION. TURNING TO 'P2' POSITION IS AVAILABLE ONLY BY SPECIAL P2 KEY.

1. FIRST PROGRAMMING

(1) RAM CLEAR

OPERATION SEQUENCE

Select "RAM CLEAR OPERATION" in P2 mode main menu and press [CASH] key. If you select "TOTAL CLEAR w/o GT", press [CASH] key to clear totalizer. If you select "TOTAL CLEAR with GT", press [CASH] key to clear totalizer and X1,X2,Z1,Z2 report counter ,receipt counter and GRAND TOTAL. If you select "ALL RAM CLEAR", press [CASH] key. All RAM data with programming will be cleared. Then default programming data will be programmed automatically.

Note: To exit operation, press [TOTAL] key.

(2) DATE

OPERATION SEQUENCE

Select "DATE PROGRAMMING" in P2 mode main menu and press [CASH] key. Current DATE is displayed and you can enter new DATE (MM/DD/YY).


(3) TIME

OPERATION SEQUENCE

Select "TIME PROGRAMMING" in P2 mode main menu. Current TIME is displayed and you can enter new TIME.

Note: Time enter by 24 hour. If enter 6 digits, HH,MM,SS If enter 4 digits, HH,MM To exit operation, press [TOTAL] key.

(4) HEADER MESSAGE

OPERATION SEQUENCE

Select "HEADER MESSAGE" in P2 mode main menu and press [CASH] key. If you select "PRESET PRINT LINE", press [CASH] key and enter number of LOGO lines required (1-8 lines). If you select "PRESET HEADER LINE, press [CASH] key and enter new message (MAX 24 characters).

● To exit operation, press [TOTAL] key.

　-5- DPRTLR.01.01

Note: 1 character is 2 digits key code. (SEE "ALPHA KEY CODE TABLE" )

　-6- DPRTLR.01.01

(5) TAX RATE *** This programming is at 'P1' position ***

Select "TAX RATE PROGRAMMING" in P1 mode main menu and press [CASH] key.

● If you choose "PRESET TAX RATE", press [CASH] key.

Enter percent rate for tax 1 and press [CASH] key.Note: TAX rate is 4 digits. (00.00% - 99.99%)

To exit operation, press [TOTAL] key.

(6) SET FISCAL MACHINE OPERATION SEQUENCE This operation needs hardware operation. This programming can be done when the totalizer is all zero only. After this programming, the register goes to the FISCAL MACHINE. This programming is effective only once and it is impossible to go back to NON-FISCAL MACHINE again.

Select "SET FISCAL MACHINE" in P2 mode main menu and press [CASH] key. Enter registration ID (10 digits), press [CASH] key. Enter taxpayer code (11 digits), press [CASH] key. Enter password, press [VOID] key. Push [TOTAL] key, finished.

Note: 1 character is 2 digits key code. (SEE "ALPHA KEY CODE TABLE" )

　-7- DPRTLR.01.01

TAX RATE PROGRAMTAX 1ENTER TAX RATE

2. OPTION FLAG PROGRAMMING

OPERATION SEQUENCE

Select "OPTION FLAG PROGRAM" in P2 mode main menu and [CASH] key. If you select "DATA PRESET MODE", press [CASH] key. If you select "PRESET REPORT ", press [CASH] key for a program scan.

Note: To exit operation press [TOTAL] key.

(1)Flag No.1 (DEPARTMENT FLAGS)

[1]Print Sales Ratio of each Department at DEPT Total (Report) yes/no [2]Print average unit price of each Department (Report) yes/no [3]Print Department Report on Full Sales Report yes/no [4]Print Department number on Report yes/no

(2)Flag No.2 (DEPARTMENT FLAGS)

[1]Not used [2]Assign the operation of DEPT SHIFT KEY = STAY DOWN MODE/ POP UP MODE [3]Skip 0 data on Department Report yes/no [4]Not used

　-8- DPRTLR.01.01

Flag Value [1] [2] [3] [4]

00 no no yes

no

01 no no yes

yes

02 no no no no03 no no no ye

s04 no ye

syes

no

05 no yes

yes

yes

06 no yes

no no

07 no yes

no yes

08 yes

no yes

no

Flag Value [1]

[2] [3] [4]

00 -- pop up no --01 -- pop up no --02 -- pop up ye

s--

03 -- pop up yes

--

04 -- stay down

no --

05 -- stay down

no --

06 -- stay down

yes

--

07 -- stay down

yes

--

08 -- -- -- --09 -- -- -- --

(3)Flag No.3 (PLU FLAGS)

[1]PLU code 6 digits PLU/13 digits PLU [2]Maximum number of Direct key position & shift level

100 keys & 5 levels / 130 keys & 3 levels [3]PLU with accumulated total （X2/Z2 ） yes/no [4]PLU flag obey linked Department Flag yes/no


[1]PLU price level 1level/3levels [2]PLU descriptor length 12digits/16digits [3]not use [4]Prohibit programming PLU unit price of "0" yes/no

　-9- DPRTLR.01.01

Flag Value [1] [2] [3] [4]

00 6 digits 100 & 5 no no01 6 digits 100 & 5 no yes02 6 digits 100 & 5 yes no03 6 digits 100 & 5 yes yes04 6 digits 130 & 3 no no05 6 digits 130 & 3 no yes06 6 digits 130 & 3 yes no07 6 digits 130 & 3 yes yes08 13

digits100 & 5 no no

09 13 digits

100 & 5 no yes

10 13 digits

100 & 5 yes no

11 13 digits

100 & 5 yes yes

12 13 130 & 3 no no

Flag Value [1]

[2]

[3]

[4]

00 1 12

--- no

01 1 12

--- yes

02 1 12

--- no

03 1 12

--- yes

04 1 16

--- no

05 1 16

--- yes

06 1 16

--- no

07 1 16

--- yes

08 3 1 --- no

Caution:This flag value affects to the basic memory location and size of PLU database, Therefore, before programming PLU this flag value must be decided.

Caution:This flag value affects to the basic memory location and size of PLU database, Therefore, before programming PLU this flag value must be decided.


[1]Print PLU number on receipt yes/no [2]Print PLU number on report yes/no [3]Print unit price on report yes/no [4]Skip 0 data on PLU report yes/no


[1]Print Negative PLU on All PLU Reports yes/no [2]Print sales ratio of All PLU Reports yes/no [3]Print sales ratio of PLU GROUP 1 Report yes/no [4]Print sales ratio of PLU GROUP 2 Report yes/no

　-10- DPRTLR.01.01

Flag Value [1] [2] [3] [4]


s02 no no ye

sno

03 no no yes

yes

04 no yes

no no

05 no yes

no yes

06 no yes

yes

no

07 no yes

yes

yes

08 yes

no no no

Flag Value [1] [2] [3] [4]


s02 no no ye

sno

03 no no yes

yes

04 no yes

no no

05 no yes

no yes

06 no yes

yes

no

07 no yes

yes

yes

08 yes

no no no


[1]Assign the operation of PLU price shift key = STAY DOWN MODE = POP UP MODE [2]Assign the operation of PLU SHIFT KEY = STAY DOWN MODE = POP UP MODE [3]Type of PLU SHIFT Type 1 : PLU SHIFT for the PLU Shift Key Type 2 : PLU SHIFT for Management Control Type 3 : PLU SHIFT for Time Shift

(8)Flag No.8 (CASHIER/SERVER FLAGS)

[1]Cashier Key is changeable during registration yes/no [2]SERVER-ID number is changeable during registration yes/no [3]Maintain SERVER-ID after registered yes/no [4]Allow indication of the SERVER-ID number yes/no (If 'no' then operation is [SERVER-ID] 999999 [SERVER-ID])

　-11- DPRTLR.01.01

Flag Value [1] [2] [3] [4]

00 pop up pop up type1

---


---


---

03 --- --- --- ---04 pop up stay

downtype1

---

05 pop up stay down

type2

---

06 pop up stay down

type3

---

07 --- --- --- ---08 stay

downpop up type

1---

Flag Value [1] [2] [3] [4]


s02 no no ye

sno

03 no no yes

yes

04 no yes

no no

05 no yes

no yes

06 no yes

yes

no

07 no yes

yes

yes

08 yes

no no no

(9)Flag No.9 (CASHIER/SERVER FLAGS)

[1]Print SERVER-ID name on receipt yes/no [2]Compulsory enter the SERVER-ID number before registration yes/no [3]Compulsory enter the SERVER-ID number before finalization yes/no (If 'yes' then FLAG No.8-[2] must be 'yes') [4]Skip 0 data on CASHIER and SERVER-ID report yes/no

(10)Flag No.10 (TAX FLAGS)

[1]Assign Tax 1 Add on tax mode (EXCLUDE) / Value added tax mode (INCLUDE) [2]Assign Tax 2 Add on tax mode (EXCLUDE) / Value added tax mode (INCLUDE) [3]Assign Tax 3 Add on tax mode (EXCLUDE) / Value added tax mode (INCLUDE) [4]Assign Tax 4 Add on tax mode (EXCLUDE) / Value added tax mode (INCLUDE)

　-12- DPRTLR.01.01

Flag Value [1] [2] [3] [4]


s02 no no ye

sno

03 no no yes

yes

04 no yes

no no

05 no yes

no yes

06 no yes

yes

no

07 no yes

yes

yes

08 yes

no no no

Flag value [1] [2] [3] [4]

00 exclude

exclude

exclude

exclude

01 exclude

exclude

exclude

include

02 exclude

exclude

include exclude

03 exclude

exclude

include include

04 exclude

include exclude

exclude

05 exclude

include exclude

include

06 exclude

include include exclude

07 exclude

include include include

08 include exclude

exclude

exclude

09 include exclud exclud include


[1]Not used [2]Print NET SALES AMOUNT in case of VAT yes/no [3]The Canadian Goods and Services TAX(GST) yes/no [4]TAX1 amount charged another taxable yes/no Note: The flag [4] is only valid when option flag [3] is “yes”.


[1]Print Tax symbol yes/no [2]Print Taxable Amount on receipt/journal yes/no [3]Print Amount of each tax on receipt/journal yes/no [4]Print Total of all taxes on receipt/journal yes/no

　-13- DPRTLR.01.01

Flag Value [1]

[2] [3] [4]

00 --- no no no01 --- no no ye

s02 --- no ye

sno

03 --- no yes

yes

04 --- yes

no no

05 --- yes

no yes

06 --- yes

yes

no

07 --- yes

yes

yes

08 --- --- --- ---

Flag Value [1] [2] [3] [4]

00 yes

no no no

01 yes

no no yes

02 yes

no yes

no

03 yes

no yes

yes

04 yes

yes

no no

05 yes

yes

no yes

06 yes

yes

yes

no

07 yes

yes

yes

yes

08 no no no no

(13)Flag No.13 (ROUNDING/CALCULATION FLAGS)

[1]Decimal point position

This operation is available only when all report data is zero.


[1]Rounding factor for Unit price calculation and Amount calculation (Amount / Quantity) (Quantity x Unit price)

(15)Flag No.15 (Not used)


[1]Rounding factor for % calculation and FC calculation

　-14- DPRTLR.01.01

Flag Value

00 No decimal point01 1’st decimal point02 2’nd decimal

point03 3’rd decimal point

Flag Value

00 Round down

05 4/509 Round up

Flag Value

00 Round down

05 4/509 Round up


[1]Overflow check by SUBTOTAL only / by SUBTOTAL & DAILY NET TOTAL [2]Rounding position for Unit price and Amount calculation [3]Rounding position for Tax calculation [4]Rounding position for % calculation

[2][3][4] = Rounding to 1'st decimal position / Rounding to last integer


[1]Rounding for last 2 integers of used minimum coin


[1]Rounding for last 2 integers of maximum Round Down an amount

*Example : Used minimum coin 25 Maximum Round Down an amount 12 Flag No.18 = 25 Flag No.19 = 12 (EX1) Total amount 37 -> 25 (25 + 12 ... Round Down) (EX2) Total amount 38 -> 50 (25 + 13 ... Round Up)

　-15- DPRTLR.01.01

Flag Value [1] [2] [3] [4]

00 Subtotal 1’st decimal

1’st decimal

1’st decimal


1’st decimal

last decimal


last decimal

1’st decimal


last decimal

last decimal

04 Subtotal last decimal

1’st decimal

1’st decimal


1’st decimal

last decimal


last decimal

1’st decimal


last decimal

last decimal

08 & Net total 1’st 1’st 1’st

Value [1]

01 Minimum coin = 102 = 2::

::

50 = 50

Value [1]

00 No round down01 Max. Round down = 1::

::

50 = 50


[1]Rounding specification

*Note : 'on detail' means -------------------(1)Check entry amount (2)No rounding entry amount : 'on finalize' means -----------------(1)Check tendering amount (2)Rounding total amount : Switzerland specification is fixed.--(1)Check entry amount (2)Check tendering amount (3)No rounding total amount (4)Rounding % calculated amount (5)Rounding exclude Tax amount : Norway specification is fixed.-------(1)No check entry amount (2)No check tendering amount (3)Rounding total amount

(21)Flag No.21 (2X BAR CODE TYPE FLAG)

Reading the 2X type of bar code is available by using a general barcode scanner. See "(8) 2X TYPE of BAR CODE" of "2. SCANNER CONNECTION".

NOTE: 02 bar code type flag, see option flag No.41

　-16- DPRTLR.01.01

Flag Value [1]

00 No rounding01 Switzerland rounding02 Holland rounding on detail and finalizing03 Holland rounding on detail and finalizing04 Holland rounding on finalizing only05 Norway rounding06 Norway rounding07 New Norway rounding on detail and finalizing08 New Norway rounding on finalizing only09 Danish rounding on detail and finalizing10 Danish rounding on finalizing only

Flag Value Content

00 Not use the 2X code

01 Type 1(weight)02 Type 2(weight)03 Type 3(weight)04 Type 4(weight)05 Type 5(weight)06 Type 6(unit price)07 Type 7(unit price)08 Type 8(unit price)09 Type 9(unit price)

(22)Flag No.22 (EXTERNAL DISPLAY FLAGS)

[1]Not used [2]Used external display type STANDARD/EPSON [3]Subtotal to external display include add-on TAX yes/no [4]Subtotal display during transaction yes/no

(23)Flag No.23 (RECEIPT/JOURNAL FLAGS)

[1]Not used [2]Not used [3]Date line print format = YY/MM/DD (YY:YEAR,MM:MONTH,DD:DAY) = MM/DD/YY = DD/MM/YY


[1]Not used [2]Not used [3]Not used [4]Buffered Bill printing is permitted yes/no (Bill issue after transaction closing will be available by turn “Yes”)

　-17- DPRTLR.01.01

Flag Value [1]

[2] [3] [4]

00 --- Standard no no01 --- Standard no ye

s02 --- Standard ye

sno

03 --- Standard yes

yes

04 --- EPSON no no05 --- EPSON no ye

Flag Value [1]

[2]

[3]

00 --- --- YY/MM/DD01 --- --- MM/DD/YY02 --- --- DD/MM/YY03 --- ---

Flag Value [1] [2] [3] [4]

00 --- --- --- no01 --- --- --- yes02 --- --- --- ---03 --- --- --- ---04 --- --- --- ---05 --- --- --- ---06 --- --- --- ---07 --- --- --- ---08 --- --- --- ---09 --- --- --- ---10 --- --- --- ---11 --- --- --- ---12 --- --- --- ---13 --- --- --- ---14 --- --- --- ---15 --- --- --- ---

--- --- --- ---


[1]Print EURO total amount at EURO period1 yes/no [2]Print the counter of sales items on receipt yes/no [3]Print total amount and transaction name double size yes/no [4]Print subtotal amount when [SUBTOTAL] is operated yes/no


[1]Graphic LOGO with/without [2]Printer cutting type full/Partial cut [3]Printer auto cutter with/without [4]Graphic LOGO used default data yes/no

　-18- DPRTLR.01.01

Flag Value [1] [2] [3] [4]

00 yes

no no no

01 yes

no no yes

02 yes

no yes

no

03 yes

no yes

yes

04 yes

yes

no no

05 yes

yes

no yes

06 yes

yes

yes

no

07 yes

yes

yes

yes

08 no no no no

Flag Value [1] [2] [3] [4]

00 with full without yes

01 with full without no02 with full with ye

s03 with full with no04 with partial without ye

s05 with partial without no06 with partial with ye

s07 with partial with no08 without full without ---09 without full without ---10 without full with ---11 without full with ---12 without partial without ---

(27)Flag No.27 (FOOD STAMP FLAGS)

[1]Food Stamp media Stamps/Debit Card [2]Food Stamp Total key operation required before tendering Required/Not Required [3]Type of FOOD STAMP No FOOD STAMP Type1 : Tax Forgiveness (Illinois food stamp rules) Type2 : Tax payment with FOOD STAMP Type3 : Tax payment with CASH

(28)Flag No.28 (REPORT FLAGS)

[1]Print report count on report yes/no [2]Reset consecutive number after issuance of Z1 Report yes/no [3]Grand total after Z1 Full Report Reset/Non reset [4]Skip 0 data on Function report yes/no

　-19- DPRTLR.01.01

Flag Value [1] [2] [3]

00 Stamps Not required No Food Stamp

01 Stamps Not required TYPE 102 Stamps Not required TYPE 203 Stamps Not required TYPE 304 Stamps Required No Food

Stamp05 Stamps Required TYPE 106 Stamps Required TYPE 207 Stamps Required TYPE 308 Debit card Not required No Food

Stamp09 Debit card Not required TYPE 110 Debit card Not required TYPE 211 Debit card Not required TYPE 312 Debit card Required No Food

Stamp

Flag Value [1] [2] [3] [4]

00 no no Reset no01 no no Reset ye

s02 no no Non

resetno

03 no no Non reset

yes

04 no yes

Reset no

05 no yes

Reset yes

06 no yes

Non reset

no

07 no yes

Non reset

yes

08 yes

no Reset no


[1]Prohibit issuance of X1-report all yes/no [2]Prohibit issuance of in drawer total yes/no [3]No Declaration (No print on report) yes/no [4]Declaration compulsory yes/no


[1]Print CANCEL total on report yes/no [2]Print Non Resetable Grand Total and Gross Total yes/no [3]Print Non Resetable Grand Total on X2,Z2-report yes/no [4]Addition Gross Total to Grand Total or Addition NET Total to Grand Total

　-20- DPRTLR.01.01

Flag Value [1] [2] [3] [4]


s02 no no ye

sno

03 no no yes

---

04 no yes

no no

05 no yes

no yes

06 no yes

yes

no

07 no yes

yes

---

08 yes

no no no

Flag Value [1] [2] [3] [4]

00 no no no Gross Total01 no no no Net Total02 no no --- Gross Total03 no no --- Net Total04 no ye

sno Gross Total

05 no yes

no Net Total

06 no yes

yes

Gross Total

07 no yes

yes

Net Total

08 yes

no no Gross Total

09 yes

no no Net Total

10 ye no --- Gross Total


[1]Fix '1' quantity when Multiplication yes/no [2]Select the operation of the counter at hourly report Sales times/ quantity [3]Print Sales Ratio of Hourly Total yes/no [4]Print average unit price of Customer on Full Report yes/no and Cashier Report (NET TOTAL / CUSTOMER COUNT)

(32)Flag No.32 (ERROR/INVALID/PROHIBIT OPERATION FLAGS)

[1]Drawer closing is compulsory yes/no [2]Generate an error when total amount is '0' yes/no [3]When non-preset key is used Generate on error or invalidate the operation [4]Compulsory card number input in card payment yes/no

　-21- DPRTLR.01.01

Flag Value [1] [2] [3] [4]

00 no Sales times no no01 no Sales times no ye

s02 no Sales times ye

sno

03 no Sales times yes

yes

04 no Sales quantity no no05 no Sales quantity no ye

s06 no Sales quantity ye

sno

07 no Sales quantity yes

yes

08 yes

Sales times no no

09 yes

Sales times no yes

10 ye Sales times ye no

Flag Value

[1] [2] [3] [4]

00 yes no Error no01 yes no Error yes02 yes no Invalidity no03 yes no Invalidity yes04 yes yes Error no05 yes yes Error yes06 yes yes Invalidity no07 yes yes Invalidity yes08 no no Error no09 no no Error yes10 no no Invalidity no11 no no Invalidity yes12 no yes Error no13 no yes Error yes14 no yes Invalidity no15 no yes Invalidity yes

(33)Flag No.33 (ERROR/INVALID/PROHIBIT OPERATION FLAGS)

[1]Allow entering minus factor key yes/no [2]Prohibit entering unit price of "0" yes/no [3]Allow changing for Card payment yes/no [4]Allow split tendering of sales yes/no

(34)Flag No.34 (TRAINING OPERATION FLAGS)

[1]Print training total amount on Report yes/no [2]Print on receipt in training mode yes/no [3]Print on journal in training mode yes/no [4]Training mode entering is available in R mode yes/no

　-22- DPRTLR.01.01

Flag Value [1] [2] [3] [4]


s02 no no ye

sno

03 no no yes

yes

04 no yes

no no

05 no yes

no yes

06 no yes

yes

no

07 no yes

yes

yes

08 yes

no no no

Flag Value [1] [2] [3] [4]

00 no yes

yes

no

01 no yes

yes

yes

02 no yes

no no

03 no yes

no yes

04 no no yes

no

05 no no yes

yes


s08 ye

syes

yes

no

(35)Flag No.35 (USER'S CHOICE OPERATION FLAGS)

[1]Not used [2]Print price of Sub item in Set menu


[1]TenKey speaker with/without [2]Compulsory [SUBTOTAL] key operation before finalization yes/no [3]Chain multiplication or Split pricing [4]Multi subtotal % operation yes/no

　-23- DPRTLR.01.01

Flag Value [1]

[2] [3] [4]

00 --- N --- ---01 --- N --- ---02 --- N --- ---03 --- --- --- ---04 --- Y --- ---05 --- Y --- ---06 --- Y --- ---07 --- --- --- ---08 --- --- --- ---09 --- --- --- ---10 --- --- --- ---11 --- --- --- ---12 --- --- --- ---13 --- --- --- ---14 --- --- --- ---15 --- --- --- ---

Flag Value [1] [2] [3] [4]


s02 no no ye

sno

03 no no yes

yes

04 no yes

no no

05 no yes

no yes

06 no yes

yes

no

07 no yes

yes

yes

08 yes

no no no


[1]Not used [2]Not used [3]Bill type(printer type) Hard(slip printer)/Soft(terminal printer) [4]Magnetic card reader format track1 / track2

[3] If you require connecting the EPSON 295 slip printer, set [2] with hard check.


[1]Allow POST-TENDERING yes/no [2]Allow for Check Cashing yes/no [3]Stop report printing yes/no [4]Subtotal display include add-on TAX yes/no

Note [3]: If you press the clear key, the display will show '-- FIn --',Receipt and Journal will print '*INCOMPLETE REPORT' and the printer will stop.

　-24- DPRTLR.01.01

Flag Value [1]

[2]

[3] [4]

00 --- --- Soft Track 101 --- --- Soft Track202 --- --- Hard Track 103 --- --- Hard Track204 --- --- --- ---05 --- --- --- ---06 --- --- --- ---07 --- --- --- ---08 --- --- --- ---09 --- --- --- ---10 --- --- --- ---11 --- --- --- ---12 --- --- --- ---13 --- --- --- ---14 --- --- --- ---15 --- --- --- ---

Flag Value [1] [2] [3] [4]


s02 no no ye

sno

03 no no yes

yes

04 no yes

no no

05 no yes

no yes

06 no yes

yes

no

07 no yes

yes

yes

08 yes

no no no


[1]Not used [2]Not used [3]Not used [4]Consolidated reports (IRC) Consolidated report only / All ECR reports and Consolidated report


(41)Flag No.41 (02 BAR CODE TYPE FLAG)

The 02 type of bar code can be read by the scanner. See "(9) 02 TYPE of BAR CODE" of "2. SCANNER CONNECTION".

NOTE: 2X bar code type flag, see option flag No.21

　-25- DPRTLR.01.01

Flag Value [1]

[2]

[3]

[4]

00 --- --- --- only

01 --- --- --- all

Flag Value Content

00 Not use the 02 code

01 Type 102 Type 203 Type 3


[1]Not used [2]Print Z-Count on Z transaction report yes/no [3]Prohibit issuance of X2-report all yes/no [4]Prohibit issuance of Z2-report all yes/no

(43)Flag No.43 (GUEST CHECK FLAGS)

[1]Not used [2]Receipt issue at N/B yes/no [3]Compulsory slip print for guest check before new balance yes/no [4]Compulsory slip print for guest check before finalization yes/no

　-26- DPRTLR.01.01

Flag Value [1]

[2] [3] [4]

00 --- no no no01 --- no no ye

s02 --- no ye

sno

03 --- no yes

yes

04 --- yes

no no

05 --- yes

no yes

06 --- yes

yes

no

07 --- yes

yes

yes

08 --- --- --- ---

Flag Value [1]

[2] [3] [4]

00 --- yes no no01 --- yes no yes02 --- yes yes no03 --- yes yes yes04 --- no no no05 --- no no yes06 --- no yes no07 --- no yes yes08 --- --- --- ---09 --- --- --- ---10 --- --- --- ---11 --- --- --- ---12 --- --- --- ---13 --- --- --- ---14 --- --- --- ---15 --- --- --- ---


(45)Flag No.45 (GUEST CHECK FLAGS)

[1]Compulsory tracking number input yes/no [2]Automatic tracking number assignment yes/no [3]Compulsory table number input yes/no [4]Compulsory covers input yes/no

　-27- DPRTLR.01.01

Flag Value [1] [2] [3] [4]


s02 no no ye

sno

03 no no yes

yes

04 no yes

no no

05 no yes

no yes

06 no yes

yes

no

07 no yes

yes

yes

08 yes

no no no

(46)Flag No.46 (Currency Mark/decimal point)

[3]DECIMAL POINT IS DOT or COMMA


[1]Management Control(X-LOCK) for server change yes/no [2]Management Control(X-LOCK) for tracking transfer yes/no [3]Management Control(X-LOCK) for tracking consolidation yes/no [4]Management Control(X-LOCK) for tracking slip yes/no

　-28- DPRTLR.01.01

Flag Value [1] [2] [3] [4]


s02 no no ye

sno

03 no no yes

yes

04 no yes

no no

05 no yes

no yes

06 no yes

yes

no

07 no yes

yes

yes

08 yes

no no no

Flag Value [1] [2] [3] [4]

00 dot01 dot02 comm

a03 comm

a0405060708091011121314

(48)Flag No.48 (SUBTOTAL AMOUNT DISCOUNT FLAGS)

[1]DISCOUNT1 affect FOOD STAMP yes/no [2]DISCOUNT2 affect FOOD STAMP yes/no [3]DISCOUNT3 affect FOOD STAMP yes/no [4]DISCOUNT4 affect FOOD STAMP yes/no

(49)Flag No.49 (SCALE FLAGS)

[1]Not used [2]Not used

[3]Scale unit type( xx.xxx/xxx.xx) kilogram/pound [4]Used tare type manual/preset

　-29- DPRTLR.01.01

Flag Value [1] [2] [3] [4]


s02 no no ye

sno

03 no no yes

yes

04 no yes

no no

05 no yes

no yes

06 no yes

yes

no

07 no yes

yes

yes

08 yes

no no no

Flag Value [1]

[2]

[3] [4]

00 --- --- kilo manual01 --- --- kilo preset02 --- --- poun

dmanual

03 --- --- pound

preset

04 --- --- --- ---05 --- --- --- ---06 --- --- --- ---07 --- --- --- ---08 --- --- --- ---09 --- --- --- ---10 --- --- --- ---11 --- --- --- ---12 --- --- --- ---13 --- --- --- ---

3. CHANGING KEY LAYOUT

OPERATION SEQUENCE

Select "CHANGE KEY LAYOUT" in P2 mode main menu and press [CASH] key. ●If you select "PRESET REPORT ", press [CASH] key for a program scan.

●If you select "DATA PRESET MODE", press [CASH] key.

Enter key following key position number and press [CASH] key. Current function key code number is indicated to right side of LCD display.Input new function key code number and press [CASH] key.

●To exit operation, press [TOTAL] key.

　-30- DPRTLR.01.01

CHANGE ALPHA LAYOUT

ENTER KEY No.

STANDARD FLAT KEYBOARD

KEY LOCATION NUMBER

64 75 86 97 108

119

130

141

152

163

65 75 87 98 109

120

131

142

153

164

66 76 88 99 110

121

132

143

154

165

67 77 89 100

111

122

133

144

155

166

1 8 15 22 29 36 43 50 57 68 78 90 101

112

123

134

145

156

167

2 9 16 23 30 37 44 51 58 69 79 91 102

113

124

135

146

157

168

3 10 17 24 31 38 45 52 59 70 80 92 103

114

125

136

147

158

169

4 11 18 25 32 39 46 53 60 71 81 93 104

115

126

137

148

159

170

5 12 19 26 33 40 47 54 61 72 82 94 105

116

127

138

149

160

171

CONVENTIONAL KEYBOARD

1 11 2

1

3

1

41 5

1

6

1

71

OPTION

KEYBOARD

2 12 2

2

3

2

42 5

2

6

2

72

3 13 2

3

3

3

43 5

3

6

3

73

4 14 2

4

3

4

44 5

4

6

4

74

5 15 2

5

3

5

45 5

5

6

5

75

6 16 2

6

3

6

46 5

6

6

6

76 81 8

6

9

1

96 1

0

1

10

6

1

1

1

7 17 2

7

3

7

47 5

7

6

7

77 82 8

7

9

2

97 1

0

2

10

7

1

1

2

8 18 2

8

3

8

48 5

8

6

8

78 83 8

8

9

3

98 1

0

3

10

8

1

1

3

9 19 2

9

3

9

49 5

9

6

9

79 84 8

9

9

4

99 1

0

4

10

9

1

1

4

1

0

20 3

0

4

0

50 6

0

7

0

80 85 9

0

9

5

10

0

1

0

5

11

0

1

1

5

Keyboard may be easily altered from single-wide key-tops to double-wide or quad-wide. All positions are programmable except, Receipt Feed, Journal Feed Key.

　-31- DPRTLR.01.01

DEFAULT KEY LAYOUT

FLAT KEYBOARD

1

2

3

4

RF JF CAN RET _ -% +% CARD

3

N.B.5

R/A

P/O #/NS SERV IN

ST%+1

ST%+2

CARD

2

SCRL

UP

6

ENT

REL

X

TIME MESS PLU BILL #

DEPT 5

DEPT 10

CARD

1

SCRL

DOWN

7

VOI

D 7 8 9

PICK

UP

BILL

DEPT 4

DEPT 9

SUB

TOTA

L

BILL

PRINT

8

E C 4 5 6 SPLIT

BILL

DEPT 3

DEPT 8

TOTAL9

CLR

1 2 3 TABLE

#DEPT 2

DEPT 7

CHRG CHECK10

0 0 0 .COVE

R

#

DEPT 1

DEPT 6

CASH/ TEND11

　-32- DPRTLR.01.01

DEFAULT KEYBOARD LAYOUT


RF JF BILL

PRINT

DEPT 10

DEPT 15

BILL

#N.B.

R/A P/O # / NS

DEPT 9

DEPT 14

PICK

UP

SCRL

UP

DEPT 8

DEPT 13

SPLIT

BILL

SCRL

DOWN

_ -% +% DEPT 7

DEPT 12

TABLE

#

CARD

2

ENT

RELSERV IN

DEPT 6

DEPT 11

COVE

R

#

CARD

1

RET X

TIME

P L U D E P T 5

SUBTOTAL

VOID

7 8 9 D E P T 4

TOTAL

E C 4 5 6 D E P T 3

CHRG

CLR 1 2 3 D E P T

2

CHECK

0 0 0 .D E P T 1

CASH

TEND

　-33- DPRTLR.01.01

FUNCTION KEY CODE TABLE

CODE

KEY FUNCTION CODE

KEY FUNCTION

00 NOP 50 CLEAR01 1 51 ERROR CORRECTION02 2 52 VOID03 3 53 ----04 4 54 ----05 5 55 +%106 6 56 +%207 7 57 -%108 8 58 -%209 9 59 -%310 0 60 -%411 00 61 -%512 000 62 BILL NUMBER13 . 63 PICK-UP BILL14 ---- 64 N/B (NEW BALANCE)15 PLU 65 -116 DEPARTMENT NUMBER 66 -217 SERVER ID 67 -318 TABLE NUMBER 68 -419 COVER NUMBER 6920 CASH TENDER/CHANGE 70 X/TIME21 CHECK TENDER 71 ENTRY / RELEASE22 CHARGE TENDER / STUB 72 ----23 SUSPENDER 73 PRINT BILL (SOFT CHECK)24 CARD 2 74 EXCHANGE25 CARD 3 75 X 10.0026 CARD 4 76 X 100.0027 FOREIGN CURRENCY # 77 DEPT SHIFT28 FOREIGN CURRENCY 1 78 PLU SHIFT 129 FOREIGN CURRENCY 2 79 PLU SHIFT 230 FOREIGN CURRENCY 3 80 PLU SHIFT 331 FOREIGN CURRENCY 4 81 PLU SHIFT 432 FOREIGN CURRENCY 5 82 PLU SHIFT 533 ---- 83 PRICE SHIFT 134 ---- 84 PRICE SHIFT 235 TOTAL 85 PRICE SHIFT 336 SUBTOTAL 86 ----37 MESSAGE / MESSAGE# 87 ----38 CARD No. 88 ----39 NON-ADD# / NON SALE 89 ----40 RECEIVED ON ACCOUNT 1 90 SPLIT BILL41 RECEIVED ON ACCOUNT 2 91 ----42 RECEIVED ON ACCOUNT 3 92 ----43 PAID OUT 1 93 SUBTOTAL%+144 PAID OUT 2 94 SUBTOTAL%+245 PAID OUT 3 95 SUBTOTAL%+346 ---- 96 SUBTOTAL%+447 ---- 97 SCROL UP48 ---- 98 SCROL DOWN49 ---- 99 SCALE

100 DIRECT PLU KEY

　-34- DPRTLR.01.01

1XX

DIRECT DEPT KEY(XX=01-99: DEPT No.)

200 DIRECT DEPT KEY WITH SHIFT

2XX

MACRO1-15 KEY (XX=01-15:MACRO No.)

　-35- DPRTLR.01.01

4. CHANGING ALPHA KEY LAYOUT

OPERATION SEQUENCE

Select "CHANGE ALPHA LAYOUT" in P2 mode main menu and press [CASH] key.

● If you select "PRESET REPORT ", press [CASH] key for a program scan.

● If you select "DATA PRESET MODE", press [CASH] key.

Enter key position number and press [CASH] key. Current alpha key code is indicated to the right side of LCD display.Input new alpha key code ( 2 digits) and press [CASH] key.

●To exit operation, press [TOTAL] key.

Note: Key numbers same as key layout table.

　-36- DPRTLR.01.01

CHANGE ALPHA LAYOUT

ENTER KEY No.

DEFAULT ALPHA KEY LAYOUT

The following keys are fixed. [RF] KEY : The Receipt Feed Key [JF] KEY : The Journal Feed Key [ENT/REL] KEY : A CAPITAL LETTER MODE <--> A SMALL LETTER MODE [PLU] KEY : A DOUBLE-WIDE CHARACTER [VOID] KEY : The Back Space Key [CLR] KEY : Clear the Alpha Input Data [CASH] KEY : ALPHA INPUT END [TOTAL] KEY : Finalization of Programming [0][1]-[9] KEY : The Numeric Keys to enter the Alpha Key Code.

STANDARD FLAT KEYBOARD

Alphabet Key Position A B C D E F G H I J

K L M N O P Q R S T

U V W X Y Z

RF JF

/ [ ] < = > ; : - +

ET PL

U

! @ # $ % ^ & * ( )

VD 7 8 9 1 2 3 4 5 6 7 8 9 0

4 5 6 Q W E R T Y U I O P

C

L

R

1 2 3 A S D F G H J K L

0 Z X C V B N M


R

F

JF % A B C D

* # + E F G H

- = / I J K L

( ) ! M N O P

E

T

; : Q R S T

A PLU U

V

D

V

　-37- DPRTLR.01.01

W SPACE

C

L

R

X Z

Y

　-38- DPRTLR.01.01

CHRACTER CODE TABLE

You may use the following keys with the ALPHA Input Mode.

[PLU] KEY : A DOUBLE-WIDE CHARACTER [ENT/REL] KEY : A CAPITAL LETTER MODE <--> A SMALL LETTER MODE [VOID] KEY : THE BACK SPACE KEY

A C A P I T A L L E T T E R

CODE

CODE

CODE

CODE

CODE

CODE

CODE

CODE

CODE

CODE

0 00

A 10

K 20

U 30

& 40

: 50

╲ 60

£ 70

È 80

Ö 90

1 01

B 11

L 21

V 31

‘ 41

; 51

] 61

E 71

E 81

Ô 91

2 02

C 12

M 22

W 32

( 42

< 52

^ 62

Å 72

Ë 82

Õ 92

3 03

D 13

N 23

X 33

) 43

= 53

` 63

Á 73

Í 83

Õ 93

4 04

E 14

O 24

Y 34

* 44

> 54

{ 64

À 74

Ì 84

Ù 94

5 05

F 15

P 25

Z 35

+ 45

? 55

| 65

Â 75

Ï 85

Ü 95

6 06

G 16

Q 26

! 36

, 46

_ 56

} 66

Ã 76

Ñ 86

Û 96

7 07

H 17

R 27

“ 37

- 47

# 57

~ 67

Ä 77

Æ 87

Ç 97

8 08

I 18

S 28

$ 38

. 48

@ 58

¿ 68

Ê 78

Ó 88

Ÿ 98

9 09

J 19

T 29

% 39

/ 49

[ 59

¡ 69

É 79

Ò 89

sp

99

A S M A L L L E T T E R

CODE

CODE

CODE

CODE

CODE

CODE

CODE

CODE

CODE

CODE

0 00

a 10

k 20

u 30

& 40

: 50

╲ 60

¢ 70

è 80

ö 90

1 01

b 11

l 21

v 31

‘ 41

; 51

] 61

Pt

71

e 81

ô 91

2 02

c 12

m 22

w 32

( 42

< 52

^ 62

å 72

ë 82

õ 92

3 03

d 13

n 23

x 33

) 43

= 53

‘ 63

á 73

í 83

ú 93

4 04

e 14

o 24

y 34

* 44

> 54

{ 64

à 74

ì 84

ù 94

5 05

f 15

p 25

z 35

+ 45

? 55

| 65

â 75

ï 85

ü 95

6 06

g 16

q 26

! 36

, 46

_ 56

} 66

ã 76

ñ 86

û 96

7 07

h 17

r 27

“ 37

- 47

# 57

~ 67

ä 77

æ 87

ç 97

　-39- DPRTLR.01.01

8 08

I 18

s 28

$ 38

. 48

@ 58

¿ 68

ê 78

ó 88

ÿ 98

9 09

j 19

t 29

% 39

/ 49

[ 59

¡ 69

ê 79

ò 89

sp

99

　-40- DPRTLR.01.01

5. CHANGING TRANSACTION DESCRIPTOR

OPERATION SEQUENCE

Select "CHANGE DESCRIPTOR " in P2 mode main menu and press [CASH] key.

●If you select "PRESET REPORT ", press [CASH] key for a program scan.

●If you select "DESCRIPTOR PRESET", press [CASH] key to entry programming mode.

Enter transaction descriptor table number(1-250) and press [CASH] key.

Current descriptor is indicated in 2nd line. Press [VOID] key to erase last character.

Enter new descriptor( 1-200 is 8 characters, 201-250 is 24 characters) refer to the alpha key code table ( 1character is 2 digits) and press [CASH] key.

SEE "ALPHA KEY CODE TABLE

● If you select "DEFALUT ENGLISH ", press [CASH] key to return to default setting.

● To exit operation press [TOTAL] key.

　-41- DPRTLR.01.01

CHANGE DESCRIPTOR

ENTER DSC. TBL# 1-250

CHANGE DESCRIPTOR DEPT TTLENTER DSC. TBL# 1-250

TRANSACTION DESCRIPTOR TABLE No.1 : ENGLISH

No.

8 CHARA.

No.

8 CHARA.

No.

8 CHARA.

No.

8 CHARA.

No.

24 CHARACTERS

1 TOT.DEPT

56 MONEXT 4

111

NIVEL 166

RETIRO3

218

**** X1 ****

2 AUDIT. 57 MONEXT 5

112

TECLAPLU

167

COCINA

21

9

**** X2 ****

3 IMP VTA 58 CLIENTE

113

COPIARAM

168

22

0

**** Z1 ****

4 EXENTO

59 CONT.INF

114

IRC 169

22

1

**** Z2 ****

5 IMP 60 NUEVO GT

115

SOLA 170

22

2

VENTAS FRUPO FRPTOS

6 TOT. VTA

61 MONEXTL1

116

ESCLAVA

171

22

3

VENTAS DEPTOS

7 TOT. IMP

62 MONEXTL2

117

MAESTRA

172

NON TXBL

22

4

VENTAS PLU GRUPO1

8 ULT.CF 63 MONEXTL3

118

PRUEBA 173

IMP VENT

22

5

VENTAS PLU GRUPO2

9 ULT.NF 64 MONEXTL4

119

GAVETA 174

IMP VTA1

22

6

VENTAS PLU

10

DPT SHFT

65 MONEXTL5

120

MONTO 175

IMP VTA2

22

7

STOCK PLU

11

PLU SHFT

66 ARQ.TARJ

121

BANDERAS

176

IMP VTA3

22

8

VANTAS CAJERO

12

CANCELAD

67 ARQUEO

122

TABL/TEC

177

IMP 1 22

9

VANTAS X VANDEDORES

13

TOTAL 68 SOB/-FAL

123

DESCRPTS

178

IMP 2 23

0

MENU PLU SALES

14

VT_BRUTA

69 piezas 124

MAXIMO

179

IMP 3 23

1

REPRTE DE TRANSACCIO

15

ANULAR

70 kilos 125

BORR/RAM

180

23

2

VARQUEO DE GAVETA

16

CORREC.

71 libras 126

DEPARTO.

181

DELETE

23

3

VENTAS X HORA NETA

17

BILL No 72 liter 127

COD/PLU

182

PORT 23

4

TRACKING ABIERTO

18

73 gram 12

NRO.MOZO

183

ENT AMT

23

INFORME TTL VENTAS

　-42- DPRTLR.01.01

8 519

74 PERIOD

129

CAJERO 184

CARD No.

23

6

NORMAL PLU

20

CONDI. 75 PROGRAM

130

TECLA# 185

BALANCE

23

7

CONDIMENT PLU

21

No.RIF 76 V.NETA 131

MINIMO 186

HALO 23

8

SET-MENU SUB PLU

22

-1 77 GRUPDEPT

132

FECHA 187

LALO 23

9

SET-MENU MAIN PLU

23

-2 78 TECLDPTO

133

HORA 188

LALO# 24

0

************************

24

-3 79 TOT PLU

134

ITEM 189

+%REC1

24

1

** RESETEO DE SISTEMA **

25

REDONDEO

80 EURO 135

NRO.MAQ

190

+%REC2

24

2

* REPORTE IMCOMPLETO *

26

TOT.NETO

81 PLU GRP1

136

FORMATO

191

-%BRUTO1

24

3

LECTURA MEM.FISCAL

27

EFECTIVO

82 PLU GRP2

137

PRECIO 192

-%BRUTO2

24

4

*** FALLA DE PADER ***

28

CHEQUE

83 TL GRUPO

138

VTA MAX#

193

-%BRUTO3

24

5

*** M-S COPIADA ***

29

COBRO VS

84 FEED 139

BANDERA

194

-%BRUTO4

24

6

* M-S COPIADA ERROR *

30

TARJETA

85 EFECTIVO

140

GRUPO 195

-%BURTO5

24

7

**** MAQUINA XX ****

31

-TTL 86 CHEQUE

141

ENLACE#

196

TARA 24

8

**** CONSOLIDADO ****

32

-4 87 COBRO VS

142

VALOR 197

MODEM

24

9

**** M-S ERROR ****

33

88 TARJETA1

143

BLOQ. 198

-TAX 25

0

NGTADJ

34

ANULADO

89 TARJETA2

144

HOLD 199

-TOTAL 25

1

REPRTO DIARIO Z

35

CORREGD

90 TARJETA3

145

LOGO 200

SELECT?

25

2

TRAINING TOTAL

36

No.CF 91 TARJETA4

146

MENSAJE

201

DIVIDIDO

25

3

*** TO BE CONTINUED ***

37

TOT.CF 92 SUB TTL

147

REPORTE

202

NO.CHEQ

25

4

B A L A N C E

38

No.NF 93 VUELTO

14

TITULO 203

NO.MESA

25

** TOTAL DE PERIODO **

　-43- DPRTLR.01.01

8 539

TOT.NF 94 TTL 149

TASA/CAM

204

NO.CLIEN

25

6

EURO TOTAL =

40

APERTURA

95 PROMOC.

150

TRAINING

205

SALD.ANT

25

7

** BIEN VENIDO **

41

F/C EFVO

96 AVERGE

151

CLAVE 206

SALD.NVO

25

8

OPEN TRACKING

42

F/C CHEQ

97 *CANCEL*

152

VTA MAX

207

TRANSFER

25

9

SET MENU SALES

43

1Euro =

98 MACRO

153

COMBO 208

CONSOLI.

26

0

TRACKING OVER

44

RET.EFVO

99 TOT. 154

STOCK 209

COMBO

26

145

RET.CHEQ

100

-ANULAR-

155

NUMERO

210

CONDI. 26

246

ARQ.EFVO

101

CANT.ART

156

TECLA 211

COLLECT

47

ARQ.CHEQ

102

CAMBIO

157

ACTIVO 212

BACKUP

48

TARJETA1

103

STOCK LK

158

BLOQ.COD

213

COCINA

49

TARJETA2

104

INICIO 159

ANTERIOR

214

PLATO

50

TARJETA3

105

STOP 160

ACTUAL 215

IN TIME

51

TARJETA4

106

TOT.F/C

161

FONDO1

216

OUT TIME

52

ARQ.COBR

107

TOT.RET.

162

FONDO2

217

WORKING

53

MONEXT 1

108

TASA IMP

163

FONDO3

54

MONEXT 2

109

ALFANUM

164

RETIRO1

55

MONEXT 3

110

ACTUAL

165

RETIRO2

　-44- DPRTLR.01.01

6. SETTING SERIAL PORT

Select "SETTING SERIAL PORT" in P2 mode main menu and press [CASH] key. If you select "MAIN BOARD PORT #1 ", press [CASH] key to select main board port #1. If you select "MAIN BOARD PORT #2 ", press [CASH] key to select main board port #2. If you select "OPTION BOARD PORT #3", press [CASH] key to select option board port #3. If you select "OPTION BOARD PORT #4", press [CASH] key to select option board port #4.

Enter communication format value and press [CASH] key.

Enter connection item value and press [CASH] key.

Enter communication speed value and press [CASH] key.

If you select "PRESET REPORT ", press [CASH] key for a program scan.

Note: To exit operation press [TOTAL] key. I.R.C. network connection is only available to connect with PORT #2. PC is only available to connect with PORT #1.

COM FORMAT CONNECT ITEM COM SPEED

** The Kitchen printer port is fixed to port #4

　-45- DPRTLR.01.01

SETTING SERIAL PORT

ENTER COM FORMAT

SETTING SERIAL PORT

ENTER COM SPEED 1 0

SETTING SERIAL PORT

ENTER CONNECT ITEM

Cautions: Port #2 is fixed for I.R.C. by hardware setting. Not to plug any other device into port #2. If you want to use it as RS-232C serial port, you must modify the main board following another instructions. Please don’t change its configuration without main board modifications.

Flag Value

Data Parity

0 8 bit non1 8 bit even2 8 bit odd3 ---- ----4 7 bit non5 7 bit even6 7bit odd

Flag Value

Connectiondevice

0 not used1 Bill printer2 Scanner / Ex. Display3 Scale4 PC / Scanner5 I. R. C.6 Modem7 ** Kitchen Printer

Flag Value

CommunicationSpeed

0 19200 bps1 9600 bps2 4800 bps

7. BILL PRINTER FORMAT

OPERATION SEQUENCE

In this section, you can program some parameter for the BILL printer.The ECR supports two kinds of printer for bill(check) printing. One is a slip printer (EPSON TM295) for a designated form and the other is one-station terminal printer(EPSON TM300 series) for rolled paper.

Select "BILL PRINTER FORMAT" in P2 mode main menu and press [CASH] key.● If you select "PRESET FEED LINE ", press [CASH] key to entry programming mode.

The number, which is entered, has different means according to the kind of the printer.

It’s number of line feed before printing to the slip printer.And it’s number of line feed after printing to the type of one-station printer.

Enter number of line feed and press [CASH] key. ●If you select "PRESET PRINT LINE ", press [CASH] key to entry programming mode.

The number, which is entered, is only for the slip printer and has no meaning for thetype of one-station printer.

Enter number of maximum printing line and press [CASH] key.●If you select "SLIP HEADER LINE n", press [CASH] key to entry slip header programming

mode.

The header messages affect to the both type of printers. If you select "PRESET REPORT ", press [CASH] key for a program scan.

To exit operation press [TOTAL] key.

8. PROGRAM VERSION DISPLAY

Select "VERSION No. DISPLAY" in P2 mode main menu and press [CASH] key.

Current ROM version indicated on the last line. Press [CLR] key to exit.

9. RAM COPY (IRC)

Select "IRC RAM COPY" in P2 mode main menu and press [CASH] key. And enter slave number and press [CASH] key. If want to select all ECR, press [CASH] key without any number.

Press [TOTAL] key to exit.

The Master ECR will copy all preset data to the selected Slave ECR exceptDATE, TIME, CONSECUTIVE No., MACHINE No., PASSWORD, LOGO STAMP MESSAGE, detail slip format and Serial Port Programming. This operation does not affect to sales report data except PLU sales.

The PLU sales data and detail slip preset data are cleared after this operation.

　-46- DPRTLR.01.01

ROM VERSION No. X.XX

10. SYSTEM TEST

Select "SYATEM TEST" in P2 mode main menu. And enter test port number and [CASH] key.

Note: 1 : SERIAL COMMUNICATION TEST (RS-232C) : Port#1 2 : SERIAL COMMUNICATION TEST (RS-485) : Port#2

3 : SERIAL COMMUNICATION TEST (RS-232C) : Port#3 4 : SERIAL COMMUNICATION TEST (RS-232C) : Port#4

11. SYSTEM RESET

The system reset operation should be done after changing program E-PROM or repairing.

POWER OFF - + -------> POWER ON

+

Press three keys during turning power on.

Note: All programming and report data will not be cleared.

12. SYSTEM RESET & DEFAULT KEYBOARD PROGRAMMING

POWER OFF - + -------> POWER ON

+

Press three keys during turning power on.

Note: The Key Layout and the ALPHA Key Layout will be programmed for the default value. The Shift Table of Direct PLU and Direct DEPARTMENT Key will be cleared. The other preset data and the report data will be kept.

　-47- DPRTLR.01.01

To operate this test sequence, you must connect special loop-back connectorto each port except port#2(RS485).

III. P R O G R A M M I N G A T ' P 1 ' P O S I T I O N

1. DEPARTMENT PROGRAMMING

Select "DEPARTMENT PROGRAM" in P1 mode main menu and press [CASH] key.


● If you select "CORRECTION, CREATE ", press [CASH] key to correct or create new data.

Enter dept number(1-99) and press [CASH] or direct [DEPT] key.

Enter linked tax flag (1-15) and press [CASH] key

Current name is indicated 2nd line.Press [VOID] key to erase last character.

Enter new dept name( MAX 14 characters) by using alpha key code( 1character 2 digits) and press [CASH] key.

　-48- DPRTLR.01.01

DEPARTMENT PROGRAM

ENTER DEPT No.

DEPARTMENT PROGRAM

ENTER LINKED TAX FLG

DEPARTMENT PROGRAM

ENTER NAME1

ATAX4TAX3TAX2TAX100-----------01--------○02-----○---03-----○○04--○------05--○---○06--○○---07--○○○08○---------09○------○10○---○---11○---○○12○○------13○○---○14○○○---15○○○○

Non TAXTAX1TAX2

TAX3

TAX4

Enter unit price and press [CASH] key.

Enter HALO table number(1-15) and press [CASH] key.

Enter 8 digits number for FLAG A,B,C and D and press [CASH] key.

Enter department group number(0-10) and press [CASH] key.

Enter LALO table number(1-15) and press [CASH] key.

　-49- DPRTLR.01.01

DEPARTMENT PROGRAMDEPT-0001ENTER UNIT PRICE1 0.00

DEPARTMENT PROGRAMDEPT-0001ENTER HALO TABLE No.

DEPARTMENT PROGRAMDEPT-0001ENTER OPT FLAG VALUE

DEPARTMENT PROGRAMDEPT-0001ENTER DEPT GROUP No.

DEPARTMENT PROGRAMDEPT-0001ENTER LALO TABLE No.

OPTIONSx x x x x x x x

A B C D

● If you select "DELETE ", press [CASH] key to delete programming data.

Enter delete department number(1-99) and press [CASH] key.

Note: This operation is permitted only when all sales report total is zero.


● To return to previous operation, press [SUBTOAL] key.

　-50- DPRTLR.01.01

DEPARTMENT PROGRAM

ENTER DEPT No.

B CompulsoryCondiment

CompulsoryMessage

Repeat

-able

Unit PriceAvailable

00 no no no no01 no no no yes02 no no yes no03 no no yes yes04 no yes no no05 no yes no yes06 no yes yes no07 no yes yes yes08 yes no no no09 yes no no yes10 yes no yes no11 yes no yes yes12 yes yes no no13 yes yes no yes14 yes yes yes no15 yes yes yes yesD Kitchen

Printer

00 No print01 Printed to KP#102 Printed to KP#203 Printed to KP#304 Printed to KP#405 Printed to Receipt

printer as ticket.

Ｃ WeightItem

00 Piece01 Kilogram02 Pound

A SingleItem

Not used

Not used

Price included ADD-ON Tax

00 no --- --- no01 no --- --- yes02 --- --- --- ---03 --- --- --- ---04 --- --- --- ---05 --- --- --- ---06 --- --- --- ---07 --- --- --- ---08 yes --- --- no09 yes --- --- yes10 --- --- --- ---11 --- --- --- ---12 --- --- --- ---13 --- --- --- ---14 --- --- --- ---15 --- --- --- ---

2. PLU PROGRAMMING

Operation sequence is similar to DEPARTMENT programming.Before starting, please check the value of option flag 3 and 4. If you want to change basic format of PLU database, please change th ese option flag s value first.

The machine supports 4 kinds of PLU category type.

Kind of PLUs Explanation 1 Normal PLU It’s used as general item.

You can use 13 digits for PLU code.It can link condiment PLUs

2 Condiment PLU It’s used with a normal PLU as condiment item.Therefore, it can't be used individually. The maximum digits of the PLU code are six digits.

3 Sub PLU for SET-MENU It’s used as one of the set menus.The price is added to the linked main PLU.Therefore, it can't be used individually.The maximum digits of the PLU code are six digits.It can link condiment PLUs like a normal PLU.

4 Main PLU for SET-MENU

It can't be used separately under the condition which Sub PLU is not at all in because of it has noindividual information without name and PLU code. The maximum digits of the PLU code are six digits.


● If you select "NORMAL PLU PROGRAM ", press [CASH] key to correct or create new data.

2-1. Normal PLU CRRECTION and CREATE 1) Enter correction or create PLU number and press [CASH] key. 2) Enter linked department number(1-99) and press [CASH] key. 3) Enter PLU name(See alpha key code table) and press [CASH] key. You can select length of name(14 or 12characters) by option flag 4 4) Enter normal unit price(Max. 8 digits) and press [CASH] key.

You can select level of price 1 or 3 by option flag 4 5) Enter linked TAX number(1-4) and press [CASH] key. If non-taxable, enter '0'. Linked Department Flag by Option Flag No.3 6) Enter HALO table number(0-15) and press [CASH] key. 7) Enter 8 digits number for PLU option flag A,B,C and D then press [CASH] key.

Refer to Normal PLU option flag table 8) Enter PLU group1 number(0-20) and [CASH] key. 9) Enter PLU group2 number(0-40) and [CASH] key. 10) Enter LALO table number(0-15) and press [CASH] key. 11) Enter unit price2(Max 8 digits) and [CASH] key.. If 3 levels price is not selected, this item is skipped. Refer to option flag #4 12) Enter unit price3(Max. 8 digits) and [CASH] key. If 3 levels price is not selected, this item is skipped. Refer to option flag #4

　-51- DPRTLR.01.01

14) Enter Format1 Code of Condiment PLU (4 digits) and [CASH] key. Example : Format Code is 5241. The 5th digit of condiment PLU code is 2 and the 4th digit is 1. Condiment PLU code of 6 digits is '?21???'. 15) Enter Format2 Code of Condiment PLU (4 digits) and [CASH] key. 16) Enter Format3 Code of Condiment PLU (4 digits) and [CASH] key. 17) Enter Format4 Code of Condiment PLU (4 digits) and [CASH] key. 18) Enter Format5 Code of Condiment PLU (4 digits) and [CASH] key. 19) Return to 1). If want to new PLU preset 2) to 18), then press [PLUn] key or enter PLU number and [PLU] key or scanning.

● Normal PLU option flag

OPTIONSx x x x x x x x A,B: Linked Department Flag by Option Flag No.3

C: OPEN/BLOCK Only PLU FlagA B C D

OPEN/BLOCK: If you want to set unused PLU temporarily, select BLOCK item.

　-52- DPRTLR.01.01

A SingleItem

Not used

Not used


00 no --- --- no01 no --- --- yes02 --- --- --- ---03 --- --- --- ---04 --- --- --- ---05 --- --- --- ---06 --- --- --- ---07 --- --- --- ---08 yes --- --- no09 yes --- --- yes10 --- --- --- ---11 --- --- --- ---12 --- --- --- ---13 --- --- --- ---14 --- --- --- ---15 --- --- --- ---


CompulsoryMessage

Repeat

-able

Open

Price

00 no no no no01 no no no yes02 no no yes no03 no no yes yes04 no yes no no05 no yes no yes06 no yes yes no07 no yes yes yes08 yes no no no09 yes no no yes10 yes no yes no11 yes no yes yes12 yes yes no no13 yes yes no yes14 yes yes yes no15 yes yes yes yes

C Block / Open WeightItem

00 Open Piece01 Open Kilogram02 Open Pound08 Block Piece09 Block Kilogram10 Block Pound

D KitchenPrinter


printer as ticket.

● If you select "CONDIMENT PLU PROG.", press [CASH] key to correct or create new data.

2-2. Condiment PLU CRRECTION and CREATE Condiment PLU called by NORMAL PLU or SUB PLU. The PLU Name may be printed. The price is not printed. The price is added to NORAML PLU or SUB PLU.

1) Enter correction or create PLU number and press [CASH] key. Condiment PLU numbers always 6 digits.(Not Allow Option Flag) 2) Enter PLU name(See alpha key code table) and press [CASH] key. You can select length of name(16 or 12characters) by option flag 4

3) Enter normal unit price(Max. 8 digits) and press [CASH] key. 4) Enter 2 digits number for PLU option flag and press [CASH] key.

Refer to Condiment PLU option flag table

5) Enter unit price2(Max 8 digits) and [CASH] key.. If 3 levels price is not selected, this item is skipped. Refer to option flag #4

6) Enter unit price3(Max. 8 digits) and [CASH] key. If 3 levels price is not selected, this item is skipped. Refer to option flag #4

7) Return to 1). If want to new PLU preset 2) to 6), then press [PLUn] key or enter PLU number and [PLU] key.

Condiment PLU option flag

OPTIONS0 0 0 0 0 0 0 0 Not used

A B C D

　-53- DPRTLR.01.01

● If you select "SUB PLU PROGRAMMING", press [CASH] key to correct or create new PLU.

2-3. Sub PLU CRRECTION and CREATE The PLU name, the price and Tax symbol may be printed. The price added to MAIN PLU.

1) Enter correction or create PLU number and press [CASH] key. The maximum number of the code are always 6 digits.(Not Allow Option Flag) 2) Enter linked department number(1-99) and press [CASH] key. 3) Enter PLU name(See alpha key code table) and press [CASH] key. You can select length of name(14 or 12characters) by option flag #4. 4) Enter normal unit price(Max. 8 digits) and press [CASH] key.

You can select level of price 1 or 3 by option flag #4. 5) Enter linked TAX number(1-4) and press [CASH] key. If non-taxable, enter '0'. Linked Department Flag by Option Flag #3. 6) Enter HALO table number(0-15) and press [CASH] key. 7) Enter 8 digits number for PLU option flag A,B,C and D then press [CASH] key.

Refer to SUB PLU option flag table 8) Enter PLU group1 number(0-20) and [CASH] key. 9) Enter PLU group2 number(0-40) and [CASH] key. 10) Enter LALO table number(0-15) and press [CASH] key. 11) Enter unit price2(Max 8 digits) and [CASH] key.. If 3 levels price is not selected, this item is skipped. Refer to option flag #4 12) Enter unit price3(Max. 8 digits) and [CASH] key. If 3 levels price is not selected, this item is skipped. Refer to option flag #4 13) Enter Format1 Code of Condiment PLU (4 digits) and [CASH] key. Example : Format Code is 5241. The 5th digit of condiment PLU code is 2 and the 4th digit is 1. Condiment PLU code of 6 digits is '?21???'. 14) Enter Format2 Code of Condiment PLU (4 digits) and [CASH] key. 15) Enter Format3 Code of Condiment PLU (4 digits) and [CASH] key. 16) Enter Format4 Code of Condiment PLU (4 digits) and [CASH] key. 17) Enter Format5 Code of Condiment PLU (4 digits) and [CASH] key. 18) Return to 1). If want to new PLU preset 2) to 18), then press [PLUn] key or enter PLU number and [PLU] key.

　-54- DPRTLR.01.01

SUB PLU option flag

OPTIONSx x x x 0 0 x x A,B,D: Linked Department Flag by Option Flag No.3

C: Not usedA B C D

　-55- DPRTLR.01.01


CompulsoryMessage ---

Open

Price

00 no no --- no01 no no --- yes02 no no --- no03 no no --- yes04 no yes --- no05 no yes --- yes06 no yes --- no07 no yes --- yes08 yes no --- no09 yes no --- yes10 yes no --- no11 yes no --- yes12 yes yes --- no13 yes yes --- yes14 yes yes --- no15 yes yes --- yes

D KitchenPrinter


printer as ticket.

A Notused

Not used

Not used


00 --- --- --- no01 --- --- --- yes02 --- --- --- ---03 --- --- --- ---04 --- --- --- ---05 --- --- --- ---06 --- --- --- ---07 --- --- --- ---08 --- --- --- ---09 --- --- --- ---10 --- --- --- ---11 --- --- --- ---12 --- --- --- ---13 --- --- --- ---14 --- --- --- ---15 --- --- --- ---

● If you select "MAIN PLU PROGRAM ", press [CASH] key to correct or create new data.

2-4. MAIN PLU CRRECTION and CREATE MAIN PLU is the title PLU of SET-MENU. After programming MAIN PLU and SUB PLU, you must program SET-MENU table.

1) Enter correction or create PLU number and press [CASH] key. MAIN PLU numbers always 6 digits.(Not Allow Option Flag) 2) Enter PLU name(See alpha key code table) and press [CASH] key. You can select length of name(14 or 12characters) by option flag 4 3) Enter linked TAX number(1-15) and press [CASH] key. If non-taxable, enter '0'. Linked Department Flag by Option Flag No.3 4) Enter 8 digits number for PLU option flag B and C then press [CASH] key.

Refer to SUB PLU option flag table 5) Return to 1). If want to new PLU preset 2) to 4), then press [PLUn] key or enter PLU number and [PLU] key.

MAIN PLU option flag

OPTIONS0 0 x x x x 0 0 B: Linked Department Flag by Option Flag No.3

C: Only PLU FlagA B C D

OPEN/BLOCK: If you want to set unused PLU temporarily, select BLOCK item.

　-56- DPRTLR.01.01

B Sub PLUPrint ---

Repeat

-able---

00 yes --- yes ---01 yes --- yes ---02 yes --- no ---03 yes --- no ---04 yes --- yes ---05 yes --- yes ---06 yes --- no ---07 yes --- no ---08 no --- yes ---09 no --- yes ---10 no --- no ---11 no --- no ---12 no --- yes ---13 no --- yes ---14 no --- no ---15 no --- no ---

C BlockOpen

00 open01 open02 open03 open04 open05 ---06 ---07 ---08 bloc

k09 ---10 ---11 ---12 ---13 ---14 ---15 ---

● If you select "DELETE ", press [CASH] key to delete PLU file.

Enter PLU number that you want to delete and [CASH] key.



● To return to previous operation, press [SUBTOAL] key.

　-57- DPRTLR.01.01

3. PLU COMMON STOCK FILE PROGRAMMING

The Common Stock file exists in the independence. And all PLUs can link to five kind ofstock file instead of doing not have individual simple stock data.

The number of PLU code, which is linked to a stock file, should be less than 6 digits. Select "STOCK FILE PROGRAM " in P1 mode main menu and press [CASH] key.


● If you select "CORRECTION, CREATE ", press [CASH] key.

Enter stock number (MAX 4 digits) and press [CASH] key.

Current name is indicated 2nd line. Press [VOID] key to erase last character.

Enter new stock name (MAX 16characters) by using alpha key code (1chractor 2digits) and press [CASH] key.

Select stock unit and press [CASH] key.

Enter deduction stock value with decimal and press [CASH] key. 0 = No stock check.

Case of warning count 10 ---- > 10 (If not enter decimal part, this value is ten as integer.)

If stock count < warning stock count, then intermittent buzzer. If stock count < deduction stock value, then error display


Enter stock file number that you want to delete and [CASH] key.


　-58- DPRTLR.01.01

STOCK FILE PROGRAM

ENTER STOCK No.

STOCK FILE PROGRAMSTOCK NAME 0001ENTER NAME

STOCK FILE PROGRAM PIECE GRAM

STOCK FILE PROGRAM

ENTER WARNING

4. PLU LINKED STOCK FILE PROGRAMMING

As for all PLUs except for Condiment and Main PLU can link to five kindof stock file.

The number of PLU code, which is linked to a stock file, should be less than 6 digits.

Select "PLU STOCK LINK PROG." in P1 mode main menu and press [CASH] key.



Enter PLU number, which link to the stock file and press [CASH] key. The number of PLU code, which is linked to a stock file, should be less than 6 digits.

Enter number of stock file, which you made and press [CASH] key.

Enter deduction stock value with decimal and press [CASH] key.

Case of deduction value 2 ---- > 2 (If not enter decimal part, this value is two as integer.)

Stock number and deduction value entry is 5 times repetition.

● If you select "DELETE ", press [CASH] key to delete programming data. Enter collective PLU number that you want to delete and [CASH] key.


　-59- DPRTLR.01.01

PLU STOCK LINK PROG

ENTER PLU No.

PLU STOCK LINK PROG ENTER STOCK No.

PLU STOCK LINK PRG.

ENT DEDUCTION

5. PLU PRICE CHANGE OPERATION SEQUENCE

Select "PLU PRICE CHANGE" in P1 mode main menu and press [CASH] key.

Enter PLU number and press [CASH] key.

Enter new PLU price and press [CASH] key.


6. COMMERCIAL MESSAGE

OPERATION SEQUENCE

Select "COMMERCIAL MESSAGE" in P1 mode main menu and press [CASH] key.

● If you select "PRESET PRINT LINE"

Enter number of line(0-5).

Note: When this number is zero any commercial messages will not be printed. ● If you select "PRESET MSG LINEn ", press [CASH] key. Then enter new message (MAX 24 characters).

Enter line-n message by using alpha key code. 1 character need 2 digits alpha key code.


　-60- DPRTLR.01.01

PLU PRICE CHANGE

ENTER PLU No. 0

PLU PRICE CHANGE

ENTER UNIT PRICE 1 0.00

7. DIRECT PLU KEY PROGRAMMING (MAX. 100/130 KEYS)

Three types of PLU SHIFT function are available. Type 1 is PLU SHIFT for PLU Shift Key. Type 2 is PLU SHIFT for Management Control. Type 3 is PLU SHIFT for Time Shift. Table Image sample: in case of selecting 6digits PLU code;

TABLE # 1 2 3 4

---

---

99 100

SHIFT level 1 100001

100002

100003

100004

100099

200000


200002

200003

200004

200099

300000


300002

300003

300004

300099

400000


400002

400003

400004

400099

500000


500002

500003

500004

500099

600000

PLU CODE

You can program 5 or 3 different PLU codes as each shift level to a physical direct PLU key. (Maximum level number 5 or 3 is depend on the option Flag No.3-[2].)

● Select "DIRECT PLU KEY TABLE" in P1 mode main menu.

(1) Select "PRESET DIRECT TABLE" to make tables, press [CASH] key.

*) If the option Flag No.3-[2] is selected max number 100, it is not available to enter over 100.

(2) Enter start table number(1-130) and press [CASH] key.

(3) Press programmed direct PLU key.Table number is incremented automatically.

(4) After making tables you need, Enter [TOTAL] key to exit from this mode.

Note: If want to cancel table data, enter '0' and then press [CASH] key.

　-61- DPRTLR.01.01

DIRECT PLU KEYTABLE

ENTER TABLE No.1-

DIRECT PLU KEYTABLE

PRESS DIRECT PLU

Note:First of all, you must program some DIRECT PLU KEYS on the Keyboard.The Maximum key number is selectable by the option Flag No.3-[2].See CHANGING KEY LAYOUT('P2' position). And then you must select PLU shift type by the option Flag No.7-[3] before programming direct PLU key table.

5-2 Select "DIRECT PLU KEY TABLE" in P1 mode main menu again.

(1) Select "PRESET KEY ASSIGN " to assign PLU code to the table, press [CASH] key.

*) If the option Flag No.3-[2] is selected max level 3, it is not available shift 4,5.

(2) Enter shift number (1-5) and press [CASH] key. Each table has each 5 shift levels.

*) If the option Flag No.3-[2] is selected max number 100, it is not available to enter over 100.

(3) Enter start table number and press [CASH] key.

(4) Enter PLU code and press [CASH] key. Table number is incremented automatically.

If you want to decrement table number, press [SUBTOAL] key.

(5) If you want to program for next shift level, press [TOTAL] to exit this mode and then repeat sequence.

● If you select "Management control” in the Option Flag No.7-[3],The item “CURRENT SHIFT No. " is added to sub menus.

Press [CASH] key to entry.


Enter current shift number (1-5) and press [CASH] key.

Note: Current shift number effective PLU shift TPYE 2. If you want to cancel current shift number, enter '0' and [CASH] key.

　-62- DPRTLR.01.01

DIRECT PLU KEYTABLE

ENTER SHIFT No. 1-

DIRECT PLU KEYTABLE

ENTER TABLE No.1-

DIRECT PLU KEYTABLE

ENTER PLU No.

DIRECT PLU KEYTABLE

ENTER CURRENT

SELECT OPERATION PRESET KEY ASSIGN PRESET REPORT

● If you select "Time Shift” in the Option Flag No.7-[3],The item “TIME SHIF TABLE” is added to sub menus.

Press [CASH] key to entry.


Enter timetable number (1-5) and press [CASH] key.

Enter start time (HH,MM 4 digits) and press [CASH] key.

Note: You can select PLU code lengths 6 or 13 digits. (See option flag No.3)


Enter shift number and press [CASH] key.

Note: Time shift table affects to PLU shift TPYE 3. DIRECT PLU KEY will shift automatically by Time. TIME = 0:00 is Cancel. 0:00 of midnight is 24:00. Arrange TIME in order of small size.

EXAMPLE of TIME TABLE

Time Table No.

TIME SHIFT

1 8:30

5 8:30-11:29 Shift level 5 is applicable

2 11:30


3 14:30


4 18:00


5 20:00

3 20:00- 8:30 Shift level 3 is applicable

　-63- DPRTLR.01.01

DIRECT PLU KEYTABLE

ENTER TIME TABLE

DIRECT PLU KEYTABLE

ENT TIME 00:00-

DIRECT PLU KEYTABLE

ENTER SHIFT No. 1-

SELECT OPERATION PRESET KEY ASSIGN PRESET REPORT



　-64- DPRTLR.01.01

8. SET-MENU PROGRAMMING

Select "SET-MENU PROGRAM " in P1 mode main menu and press [CASH] key.



Enter SET-MENU Main PLU number and press [CASH] key. SET-MENU Main PLU numbers always 6 digits.(Not Allow Option Flag)

Enter SET-MENU SUB PLU number and press [CASH] key. SET-MENU SUB PLU numbers always 6 digits.(Not Allow Option Flag)

Select SUB PLU is FIXED or SELECTABLE and press [CASH] key.

Note:If you select ‘SELECTABLE SUB PLU’, you can select if it registers by using[PLU] or [VOID] key.

SUB PLU number and fixed or choice selection entry is 10 times repetition.

● If you select "DELETE ", press [CASH] key to delete programming data. Enter SET-MENU MAIN PLU number that you want to delete and [CASH] key.


　-65- DPRTLR.01.01

SET-MENU PROGRAM

ENTER PLU No.

SET-MENU PROGRAM

ENTER SUB PLU No.

SET-MENU PROGRAM FIXED SUB PLU SELECTABLE SUB

9. COOKING INSTRUCTION PROGRAMMING

Select "COOKING INST. MESSAGE" in P1 mode main menu and press [CASH] key.



Enter link message number (1-99) and press [CASH] key.

Current message is indicated 2nd line. Press [VOID] key to erase last character.

Enter new message (MAX 18characters) by using alpha key code (1chractor 2digits) and press [CASH] key.

Enter flag value 0 or 1 and press [CASH] key.


Enter link message number that you want to delete and [CASH] key.


　-66- DPRTLR.01.01

COOKING INST.MESSAGE

ENT LINK MESSAGE

COOKING INST.MESSAGELINK MESSAGE 01ENTER LINK

COOKING INST.PRESETLINK MESSAGE 01ENTER OPT FLAG

Print on BILL/Receipt

00

not printed

0 printed

10. SERVER(CLERK)-ID NUMBER and NAME (MAX 99 SERVERS)

Select "SERVER PROGRAMMING" in P1 mode main menu and press [CASH] key.


Enter SERVER number(1-99) and press [CASH] key.

Enter SERVER secret number (MAX 6 digits) and press [CASH] key.

Enter SERVER name(Max. 8 characters) by using alpha key code( 1 character 2 digits) and press [CASH] key.

● If you select "DELETE ", press [CASH] key.

Enter SERVER number(1-99) that you want to delete.




　-67- DPRTLR.01.01

SERVER ID PROGRAM

SERVER TABLE No.

SERVER ID PROGRAM

SERVER ID MAX

SERVER ID PROGRAM SERVER001SERVER NAME 8

SERVER ID PROGRAM SERVER TABLE No.

11. MACHINE No.

Select "MACHINE No. PROGRAM" in P1 mode main menu and press [CASH] key.

Enter machine number(1-99)

Note: When using PC communication or I.R.C this machine number must be programmed as a machine ID.

12. REPORT P2MODE PASSWORD

Select "PASSWORD PROGRAMMING" in P1 mode main menu and press [CASH] key. Select X/Z/P Mode password or P2 MODE password.

Enter password number(Max. 4 digits) and press [CASH] key.

　-68- DPRTLR.01.01

　　 PASSWORD PROGRAM

ENTER PASSWORD

MACHINE No. PROGRAM

ENTER MACHINE No.

13. TAX RATE (TAX1 – TAX4)

Select "TAX RATE PROGRAMMING" in P1 mode main menu and press [CASH] key.

● If you select "STRAIGHT TAX RATE", press [CASH] key.

Enter percent rate (including three decimal parts) for tax 1 and press [CASH] key.Note: TAX rate is 4 digits. (00.00% - 99.99%)


　-69- DPRTLR.01.01

TAX RATE PROGRAMTAX 1ENT TAX RATE

14. LOCK OUT AMOUNT TABLE (HALO/LALO TABLE)

Select "HALO TABLE PROGRAM" in P1 mode main menu and press [CASH] key.

You can use 16 kinds of HALO table.

Enter HALO value (MAX. 8 digits) and press [CASH] key.

You can use 15 kinds of LALO table.

Enter LALO value (MAX. 8 digits) and press [CASH] key.


● To go back, press [SUBTOTAL] key.

　-70- DPRTLR.01.01

HALO TABLE PROGRAM

ENTER HIGH

LALO TABLE PROGRAM

ENTER LOW

15. GROUP NAME for REPORT

Select "GROUP NAME PROGRAM" in P1 mode main menu and press [CASH] key. ● If you select "DEPARTMENT GROUP", press [CASH] key.

Enter department group number (1-10) and press [CASH] key.

Enter department group name and press [CASH] key.After inputting department group name, return to table number input mode.

● If you select "PLU GROUP1 ", press [CASH] key.

Enter PLU group1 number (1-20) and press [CASH] key.

Enter PLU group1 name and press [CASH] key.After inputting PLU group1 name, return to table number input mode.

● If you select "PLU GROUP2 ", press [CASH] key.

Enter PLU group2 number (1-40) and press [CASH] key.

Enter PLU group2 name and press [CASH] key.After inputting PLU group2 name, return to table number input mode.

Note: Group name size is 12 digits.


　-71- DPRTLR.01.01

GROUP NAME PROGRAM

ENTER DEPT GROUP

GROUP NAME PROGRAM

ENTER NAME

GROUP NAME PROGRAM

ENTER NAME

GROUP NAME PROGRAM

ENTER PLU GROUP1

GROUP NAME PROGRAM

ENTER PLU GROUP2

GROUP NAME PROGRAM

ENTER NAME

16. DIRECT DEPT KEY WITH SHIFT PROGRAMMING (MAX. 40 KEYS)

First of all, you must program some DIRECT DEPT KEYS WITH SHIFT on the Keyboard.See CHANGING KEY LAYOUT.

DIRECT DEPT KEY will shift by pressing the DEPT SHIFT KEY.

Select "DIRECT DEPT KEY TABLE" in P1 mode main menu and press [CASH] key. ● If you select "PRESET DIRECT TABLE", press [CASH] key.

Enter start table number (1-40) and press [CASH] key.

Press direct DEPT key.

Note: If want to cancel table data, then enter '0' and [CASH] key.

● If you select "PRESET KEY ASSIGN ", then PLU code is assigned to each table. Select "SHIFT OFF MODE" or "SHIFT ON MODE"

Enter start table number and press [CASH] key.

Enter department number and press [CASH] key. Table number is incremented automatically. If you want to decrement table number, press [SUBTOAL] key.

EXAMPLE of Shift Table

TABLE # 1 2 3 4 38

39

40

DIRECT DEPT KEY No.

49 48 47 46

SHIFT TABLE No. DEPT No.1 : DEPT SHIFT OFF

1 2 3 4

2 : DEPT SHIFT ON 21 22 23 24

　-72- DPRTLR.01.01

DIRECT DPT KEYTABLE

PUSH DIRECT DEPT

DIRECT DPT KEYTABLE

ENTER TABLE No.1-

DIRECT DPT KEYTABLE

ENTER DEPT No.

DIRECT DPT KEYTABLE

ENTER TABLE No.1-

● If you select "PRESET REPOT ", press [CASH] key for a program scan.

　-73- DPRTLR.01.01

17. CASHIER NAME and LINKED DRAWER

Select "CASHIER PROGRAMMING" in P1 mode main menu and press [CASH] key.

Enter cashier number (1-4) and press [CASH] key.

Enter cashier name. (See alpha key code table)

Select cashier linked drawer. After selecting cashier linked drawer, press [CASH] key.


　-74- DPRTLR.01.01

CASHIER PROGRAMMING

ENTER CASHIER

CASHIER PROGRAMMING

ENTER NAME

SELECT USED DRAWER NO USED DRAWER USED DRAWER A

18. PERCENTAGE DISCOUNT/ADD-ON KEY

Select "%DISCOUNT %ADD-ON" in P1 mode main menu and press [CASH] key. ● Select preset item.

Enter percentage rate with decimal point. Note: Rate is 2digits(integer) + 3digits(decimal). In case of 10%, input only integer 10. In case of 10.005%, input 10 and 005 after decimal point.

Enter upper limit percentage rate.

Enter option flag.

Enter option flag. After inputting linked tax flag, return to percentage item selection mode.

OPTION (1) Tax calculation obeys linked tax flag yes/no (2) Calculated amount link to DEPT/PLU yes/no (3) Not used (4) Management Control(X-LOCK) yes/no

　-75- DPRTLR.01.01

%DISCOUNT %ADD-ON -%ENTER PERCENT

%DISCOUNT %ADD-ON -%ENTER UPPER LIMIT

%DISCOUNT %ADD-ON -%ENTER OPT FLAG

%DISCOUNT %ADD-ON -%ENTER LINKED TAX

A [1] [2] [3] [4]

00 no no --- no01 no no --- yes02 no no --- no03 no no --- yes04 no ye

s--- no

05 no yes

--- yes

06 no yes

--- no

07 no yes

--- yes

08 yes

no --- no

09 yes

no --- yes

10 ye no --- no

Link TAX flag: % calculation affect to TAXn


19. AMOUNT DISCOUNT KEY

Select "AMOUNT DISCOUNT" in P1 mode main menu and press [CASH] key. ● Select preset item.

Enter discount amount (MAX. 8 digits) and press [CASH] key.

Enter HALO table number and press [CASH] key.

Enter option flag value. After entering option flag value, return to item selecting mode.

　-76- DPRTLR.01.01

AMOUNT DISCOUNT -1ENTER DISC.

AMOUNT DISCOUNT -1ENTER HALO TABLE

AMOUNT DISCOUNT -1ENTER OPT FLAG

ATAX4TAX3TAX2TAX100-----------01--------○02-----○---03-----○○04--○------05--○---○06--○○---07--○○○08○---------09○------○10○---○---11○---○○12○○------13○○---○14○○○---15○○○○

Non TAXTAX1TAX2

TAX3

TAX4

OPTION A: Linked TAX flag *1 B: (1) Amount affects to taxable yes/no (2) Calculated amount link to DEPT/PLU yes/no (3) Not use (4) Management Control(X-LOCK) yes/no

A B

*1: This flag is valid in subtotal amount discount.


19.5 SUBTOTAL PERCENT PLUS (ST%+1 – ST%+4)

Select "SUBTOTAL % PLUS" in P1 mode main menu and press [CASH] key.

● If you select "SUBTOTAL % PLUS PROGRAM", press [CASH] key.

Enter percentage rate with decimal point. Note: Rate is 2digits(integer) + 3digits(decimal). In case of 10%, input only integer 10. In case of 10.005%, input 10 and 005 after decimal point.


　-77- DPRTLR.01.01

ATAX4TAX3TAX2TAX100-----------01--------○02-----○---03-----○○04--○------05--○---○06--○○---07--○○○08○---------09○------○10○---○---11○---○○12○○------13○○---○14○○○---15○○○○

Non TAXTAX1TAX2

TAX3

TAX4

B [1] [2] [3]

[4]

00 no no --- no01 no no --- ye

s02 no no --- no03 no no --- ye

s04 no ye

s--- no

05 no yes

--- yes

06 no yes

--- no

07 no yes

--- yes

08 yes

no --- no

SUBTOTAL % PLUS

ENT %+ RATE nn.nnn

20. CLOSING MEDIA KEY

Select "CLOSING MEDIA" in P1 mode main menu and press [CASH] key. ● Select preset item.


Enter option flag value and press [CASH] key.

OPTION A: (1) Prohibit Over Tendering Operation yes/no (2) Allow Tendering Operation yes/no (3) Compulsory Tendering yes/no (4) Open the Cash Drawer yes/no

B: (1) Not used (2) Allow refund closing operation yes/no (3) Not use (4) Management Control(X-LOCK) yes/no *This flag not affect to CASH media

A B


　-78- DPRTLR.01.01

CLOSING MEDIA CASHENTER HALO TABLE No.

CLOSING MEDIA CASHENTER OPT FLAG VALUE

A [1] [2] [3] [4]


s02 no no ye

sno

03 no no yes

yes

04 no yes

no no

05 no yes

no yes

06 no yes

yes

no

07 no yes

yes

yes

08 yes

no no no

B [1] [2] [3]

[4]

00 no no --- no01 no no --- ye

s02 no no --- no03 no no --- ye

s04 no ye

s--- no

05 no yes

--- yes

06 no yes

--- no

07 no yes

--- yes

08 yes

no --- no

21. OTHER FUNCTION KEY

Select "OTHER FUNCTION KEY" in P1 mode main menu and press [CASH] key. Select preset item.


Note: HALO table programming item is indicated only when R/A or P/O selected.

Enter option flag value and press [CASH] key.


NOTE: This operation preset allow function keys. R/A1, R/A2, R/A3, P/O1, P/O2, P/O3, ERROR CORRECTION, VOID, NOSALES, EXCHANGE, HOLD, RETURN, PROMO

　-79- DPRTLR.01.01

OTHER FUNCTION KEYR/A 1ENTER HALO TABLE

OTHER FUNCTION KEYR/A 1ENTER OPT FLAG

Flag Value[1][2]00---no01---yes[1] not use[2] Management Control(X-LOCK) yes/no

22. FOREIGN CURRENCY

Select "FOREIGN CURRENCY" in P1 mode main menu and press [CASH] key.

Enter foreign currency number (1-5) and press [CASH] key.

Enter foreign currency rate (without decimal point) and press [CASH] key.

Enter foreign currency decimal point position and press [CASH] key.

Note: Rate is 3digits(integer) + 6digits(decimal).


Foreign currency rate calculate as follow, Your country currency multiple FC rates. If used EURO period function, then foreign currency 1 has special meaning. FC1 rate need entry 1EURO = local currency. In case EURO 1st period, Country currency division FC1 rate. In case EURO 2nd and 3rd period, EURO currency multiple FC1 rate.

23. EURO PERIOD PRESET

Select "EURO PERIOD PRESET" in P1 mode main menu and press [CASH] key. ● If you select "PRESET EURO PERIOD", press [CASH] key. Enter new EURO period number.



Note: If sales data is not ZERO, changing EURO period is prohibited. If EURO period change 1st period to 2nd, then department and PLU preset amount automatically change EURO currency (follow FC1 rate). And decimal point is change to FC1 decimal. If EURO period change 2nd period to 1st, then department and PLU preset amount change to local currency automatically. (follow FC1 rate) And decimal point is changed to FC1 decimal. If EURO 3rd period, then print and display EURO currency mark.

　-80- DPRTLR.01.01

FOREIGN CURRENCY FC1 ENTER FC FLAG

FOREIGN CURRENCY ENTER FC

FOREIGN CURRENCY FC1 FC RATE

24. REPORT CHAIN

Select "CHAIN REPORT PROG." in P1 mode main menu and press [CASH] key. Select report level from X1 to Z2. Select chain report items. When finished, SCROLL to top and select “ END OF SELECTION”.

Note: If you want to cancel the REPORT CHAIN, you must select the "END OF SELECTION" key at first. You can not program Z1 REPORT CHAIN with FULL DEPT SALES and ALL CASHIERS SALES.


25. MACRO KEY

Select "MACRO KEY FUNCTION" in P1 mode main menu and press [CASH] key. ● If you select "PRESET MACRO KEY", press [CASH] key.

Enter MACRO key number. (1-15)

Select MACRO key position or cancel MACRO and press [CASH] key. Recording MACRO key.

When ready to end recording MACRO key stokes press [CLEAR] key.


Note: If you have relocated KEYBOARD LAYOUT, you must program the MACRO KEY all over again.

　-81- DPRTLR.01.01

MACRO KEY FUNCTION ENTER MACRO

26. PRINTING ITEM for CHECK PRINT

Select "CHECK PRINT ITEM" in P1 mode main menu and press [CASH] key. ● If you select "PRESET CHECK PRINT", press [CASH] key. Select printing item.

Preset character. (SEE ALPHA KEY CODE TABLE)

Programmable printing item

PRINTING ITEM FORMATSUBTOTAL with SYMBOL 1SUBTOTAL with SYMBOL 2SHOP NAMEMESSAGE 1MESSAGE 2MESSAGE 3SYMBOL 3SYMBOL 4

Max.10 charactersMax.10 charactersMax.40 charactersMax.30 charactersMax.30 charactersMax.30 charactersMax. 1 characterMax. 1 character



27. CHECK FORMAT TABLE

Select "CHECK PRINT FORMAT" in P1 mode main menu and press [CASH] key.● If you select "PRESET CHECK FORMAT", press [CASH] key.

Enter check print format table number and press [CASH] key.

Note: The CHECK FORMAT TABLE is FIVE.

Enter definition number (1-10) and press [CASH] key.

Note: ONE CHECK FORMAT TABLE has TEN Definitions for PRINTING ITEM.

　-82- DPRTLR.01.01

CHECK PRINT ITEM SUBTOTAL SYMBOL1

CHECK PRINT FORMAT ENTER TABLE No. 1-

CHECK PRINT FORMAT ENTER DEFINE

Enter print format data and press [CASH] key.

PRINT ITEM NUMBERITEM No. PRINTING ITEM ABOUT FORMAT

0123456789

1011121314

NON PRINTSUBTOTAL with SYMBOL 1SUBTOTAL with SYMBOL 2DAY of DATEMONTH of DATEYEAR of DATEMACHINE#TIMERECEIPT#SHOP NAMEMESSAGE 1MESSAGE 2MESSAGE 3SYMBOL 3SYMBOL 4

Programmable SYMBOL 1 (Max.10 Characters)Programmable SYMBOL 2 (Max.10 Characters)Fixed Format "DD"Fixed Format "MM"Fixed Format "YY"Fixed Format "#99"Fixed Format "HH:MM"Fixed Format "999999"Programmable (Max.40 Characters)Programmable (Max.30 Characters)Programmable (Max.30 Characters)Programmable (Max.30 Characters)Programmable (1 Character)Programmable (1 Character)

Print formatNo.

A B C D

1 00-14

00-19

00-51

00-01

2::

10

A : PRINTING ITEM# (00 - 14) See PRINTING ITEM NUMBER B : Y POSITION (00 - 19) See SAMPLE SCALE PRINTING C : X POSITION (00 - 51) See SAMPLE SCALE PRINTING D : ATTRIBUTE (00 = NORMAL CHARACTER, 01 = DOUBLE WIDW CHARACTER)


● If you select "PRESET REPORT ", press [CASH] key for a program scan. ● If you select "SAMPLE SCALE PRINT", press [CASH] key.

The scale of printing position for check format is printed.

X

0123456789012345678901234567890123456789012345678901 2 2 2 2 2

　-83- DPRTLR.01.01

CHECK PRINT FORMAT ENTER PRINT

Y

| | | | | 19 19 19 19 19

　-84- DPRTLR.01.01

28. KITCHEN PRINTER PROGRAMMING

Select "KITCHEN PRINTER " in P1 mode main menu and press [CASH] key.


Enter kitchen printer number (1-4) and press [CASH] key.

Current name is indicated 2nd line. Press [VOID] key to erase last character.

Enter the Kitchen Printer name (MAX 16characters) and press [CASH] key.

Enter backup kitchen printer number (0-4) and press [CASH] key. 0 = receipt(ticket print)

Enter kitchen printer option flag value and press [CASH] key.

OPTION A : Line feed counter between a item print and next item print on the receipt(ticket print)B : [1] Partial cut between a item print and next item print on the receipt(ticket print) [2] Kitchen printer without auto cutter

A B



　-85- DPRTLR.01.01

KITCHEN PRINTER

KITCHEN PRINTER No.

KITCHEN PRINTER KP 01 ENTER NAME 0

KITCHEN PRINTER KP 01 ENTER BACKUP No. 0

KITCHEN PRINTER KP 01 ENTER OPT FLAG VALUE

Flag Value [1] [2]

00 no no01 no ye

s02 ye

sno

29. MASTER/SLAVE TABLE (IRC)

When using I.R.C function, following item must be programmed correctly.

1) Machine ID programming

Turn the mode lock to the P1 position.

Then select Machine No. programming and press [CASH] key.

Input machine number(1-99) and press [CASH] key.Each machine must be programmed different number. Don’t set same number.Maximum 9 machines (1 Master and 8 Slave) can be programmed in one system.

2) Master Slave Table programming.

Turn the mode lock to the P1 position. Then select MASTER SLAVE PROG.

Enter [CASH] key.

Input machine ID number and press [CASH] key.

Select machine type SLAVE or MASTER and press [CASH] key. The machine type must be programmed to not only itself but also all ECR that is connected in

the network. Therefore all ECR must have same table data.

　-86- DPRTLR.01.01

SELECT PROGRAM ITEM PLU STOCK PROGRAM SERVER ID

MACHINE No.PROGRAM ENTER MACHINE No.

SELECT PROGRAM ITEM CHECK PRINT ITEM CHECK PRINT

MASTER SLAVE PROG.

ENTER MACHINE No.

SELECT MACHINE TYPESTAND ALONESLAVE ECRMASTER ECR

30. TIME PROGRAMMING

Select "TIME PROGRAMMING" in P1 mode main menu and press [CASH] key. Display now time and you can enter new TIME.

Note: Time enter by 24 hour. If enter 6 digits, HH,MM,SS If enter 4 digits, HH,MM To exit operation, press [TOTAL] key.

31. DATE PROGRAMMING

Select "DATE PROGRAMMING" in P1 mode main menu and press [CASH] key. Display now date and you can enter new DATE.


32. TARE WEIGHT PRESET Select "TARE WEIGHT PRESET" by P1 mode main menu.

Enter TARE weight value and press [CASH] key, then automatically turns next level tareweight entry display. Maximum 8 kinds tare weight can be programmed.

To terminate programming, press [TOTAL] key.

33. START BILL No. PROGRAMMING Select "START BILL No. PROG." by P1 mode main menu.

Enter new consecutive No. and press [CASH] key.

　-87- DPRTLR.01.01

TARE WEIGHT PRESET

ENTER TARE

START BILL No.PROG.

ENTER START

34. MODEM PRESET Select "MODEM PRESET" by P1 mode main menu.

● If you select "MODEM FLAG PRESET", press [CASH] key.

Enter modem option flag value and press [CASH] key.

OPTION (1)Not used(2)Not used(3)Use password at communication yes/no(4)Use modem at PC communication yes/no

● If you select "MODEM PASSWORD", press [CASH] key.

Enter modem communication password and press [CASH] key.

● If you select "DIALING No. PRESET", press [CASH] key.

Enter dialing number and push [CASH] key. Note: Dialing number preset 8 kinds.


● If you select "DIALING PRESET No. ", press [CASH] key for a program scan. Dialing to Preset No.

● If you select "DIALING INPUT No. ", press [CASH] key for a program scan. Dialing input No.


If you want more information about modem connection, please refer to the modem control chapter in the interface manual.

　-88- DPRTLR.01.01

MODEM PRESET

ENTER OPT FLAG VALUE

MODEM PRESET

ENTER PASSWORD 0

MODEM PRESET

ENTER DIALING No. 1

Flag Value [1]

[2]

[3] [4]

00 --- --- no no01 --- --- no ye

s02 --- --- ye

sno

35. ALL PRESET REPORT

Select "P1 PRESET REPORT" in P1 mode main menu and press [CASH] key. ISSUE the Preset Report

36. PROGRAM VERSION DISPLAY

OPERATION SEQUENCE

Select "VERSION No. DISPLAY" in P1 mode main menu and press [CASH] key.

37. TRAINING MODE PASSWORD

Select "TRAINING MODE" in P1 mode main menu and press [CASH] key.

Enter training mode password number( Max 4 digits) and press [CASH] key.

Note: Under the training mode, all transaction amounts will not affect to any reports.

　-89- DPRTLR.01.01

TRAINING MODE

ENTER PASSWORD 1234

ROM Version No. x.xx

III. S E R I A L I N T E R F A C E & C O N N E C T I O N S

1. INTER-REGISTER(Master-Slave) COMMUNICATION (IRC)

(1) INTERFACE SPECIFICATION for Inter-Register Communication

* Hardware Interface : RS-485 (PORT-#2)

* Link Control : Multi point (Max.32 stations)

(2) INTRODUCTION of Inter-Register Communication

First you must program MACHINE No.(Refer to Page 50) for all ECRs. Next you must program MASTER/SLAVE TABLE (Refer to Page 66) at the Master ECR.

　-90- DPRTLR.01.01

Port#3 and #4 are option

Cautions: Port #2 is fixed for I.R.C. by hardware setting. Not to plug any other device into port #2. If you want to use it as RS-232C serial port, you must modify the main board following another instructions. Please don’t connect any devices to the port #2 without main board modifications.

(3) PROGRAMMING with Inter-Register Communication

If you program following items at the Master ECR, the Master ECR will copy the programmed data to all Slave ECRs. If the Master ECR can not communicate to a Slave ECR, when you pressed Q/F key for programming No. input, your input will be of no effect. After the Master ECR has copied to all Slave ECRs, if it is O.K. then the receipt will show '*** M/S COPIED ***', if it is N.G. then the receipt will show '* M/S COPY ERROR *'.

PROGRAMMING AT 'P2' POSITION

CHANGING TRANSACTION DESCRIPTOR

PROGRAMMING AT 'P1' POSITION

DEPARTMENT PROGRAMMING PLU PROGRAMMING

PLU STOCK LINK PROGRAMMINGSET-MENU PROGRAMMINGCOOKING INSTRUCTION PROGRAMMINGSTOCK FILE CORRECT

STOCK FILE PROGRAMMING SERVER-ID NUMBER and NAME

PASSWORD PROGRAMMING TAX RATE (TAX1 – TAX4) HIGH/LOW AMOUNT LOCK OUT TABLE GROUP NAME for REPORT CASHIER NAME & LINK TO DRAWER PERCENTAGE DISCOUNT/ADD-ON KEY AMOUNT DISCOUNT KEY CLOSING MEDIA KEY OTHER FUNCTION KEY FOREIGN CURRENCY

EURO PERIOD REPORT CHAIN

KITCHEN PRINTER MASTER/SLAVE TABLE

　-91- DPRTLR.01.01

2. SCANNER CONNECTION

YOU MAY CONNECT A BARCODE SCANNER TO ONE OF RS-232C PORTS (PORT-#1,#3,#4).

(1) INTERFACE SPECIFICATION for Barcode Scanner

* Hardware Interface : Asynchronous Serial (RS-232C level)

* Baud Rate : 9600 bps

* Character Format : Start bit + ASCII code + Parity bit + Stop bit (1 bit) (7 bits) (1 bit) (1 bit)

* Parity : Even Parity

* Text Format

Bar Code DataCR orLF orCR+LF

without any communication protocol

(2) CONNECTION for Metrologic MS700 Projection Scanner (with PORT-#1,#3,#4)

ECR side MS700 side DSUB9 DSUB9 Received Data (RXD) 2 2 (TXD) Transmitted Data (TXD) 3 Signal Ground (SG) 5 5 (SG) Data Terminal Ready (DTR) 4 Data Set Ready (DSR) 6 Clear To Send (CTS) 8 (+5v) 9

In case of using port #1, pin#4,6 and 8 must be connected each other.

ECR side MS700 side DSUB9 DSUB25 Received Data (RXD) 2 2 (TXD) Transmitted Data (TXD) 3 Signal Ground (SG) 5 7 (SG) Data Terminal Ready (DTR) 4 Data Set Ready (DSR) 6 Clear To Send (CTS) 8 (+5v) 9


　-92- DPRTLR.01.01


(3) CONNECTION for NIPPONDENSO BHS 6060 Hand Scanner (with PORT-#1,#3,#4)

ECR side BHS 6060 side DSUB9 DSUB9 (Pin No.D) Received Data (RXD) 2 3 (TXD) Transmitted Data (TXD) 3 2 (RXD) Data Terminal Ready (DTR) 4 4 (CTS) Data Set Ready (DSR) 6 Clear To Send (CTS) 8 5 (RTS) Signal Ground (SG) 5 7 (SG) (+5v) 9 9 (+5V)

In case of using port #1, pin#4 and 6 must be connected.

(4) CONNECTION for SCANTECH POLARIS P-7010 (with PORT-#1,#3,#4)

ECR side SCANTECH POLARIS P-7010 DSUB9 RJ-48 Received Data (RXD) 2 2 (TXD) Transmitted Data (TXD) 3 Signal Ground (SG) 5 6 (GND) (+5v) 9 7 (+5V) Data Terminal Ready (DTR) 4 Data Set Ready (DSR) 6 Clear To Send (CTS) 8


　-93- DPRTLR.01.01

(5) Metrologic MS700 Scanner

Dip Switch Settings

ON o o o o o o o o o o oOFF o o o o o o o o o o o o o o o o

1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 2 3DS3 DS2 DS1 DS

4

DS3 : Code Type Enable/Disable -1 ON : CODE 39 ENABLED -2 ON : CODE 93 ENABLED -3 ON : CODE 128 ENABLED -4 ON : CODABAR ENABLED -5 OFF : INTERLEAVED 2 OF 5 DISABLED -6 OFF -7 ON : ENABLED MECCA -8 ON : UPC/EAN ENABLED

DS2 : Communication Parameters -1 OFF : DO NOT TRANSMIT UPC-A CHECK DIGIT -2 OFF : DO NOT TRANSMIT UPC-E CHECK DIGIT -3 OFF : NORMAL BEEP TONE -4 OFF -5 OFF : NO PREFIX IDENTIFIERS -6 OFF : 9600 bps -7 OFF -8 ON

DS1 : Communication Parameters -1 ON : NO LF TRXD -2 OFF : CR TRXD -3 OFF : DO NOT EXPAND UPC-E -4 OFF : EVEN PARITY -5 ON -6 OFF : RTS/CTS DISABLED -7 OFF : NO SUFFIXED IDENTIFIERS -8 ON : RS232C PROTOCOL

DS4 : Timeout Features -1 ON : 2 SECOND BETWEEN TWO OF THE SAME SYMBOL -2 OFF : 10 MINUTE AFTER A SCAN, THE MOTOR AND LASER ARE SHUT OFF -3 OFF

(6) SCANNING OPERATIONS

You can scan the Bar Code at the PLU number entries, PLU PROGRAMMING(at 'P1' position), FULL PLU SALES REPORT(at 'X' or 'Z' position), FULL PLU STOCK REPORT(at 'X' or 'Z' position), PLU SALE ENTRIES(at 'R' position). In case your register is not at the PLU number entries, the error buzzer will ring and the display will show the PLU number.

　-94- DPRTLR.01.01

(7) 2X TYPE of BAR CODE

The 2X type of bar code can be read by the scanner. The 2X type of bar code is the following EAN/JAN(13 digits bar code) for the weight of goods or the unit price of goods. You can select The 2X type of bar code by the option flag No.21.

2X BAR CODE TYPE for WeightTYPENo.

EAN/JAN (13digits)X = 8 or 9

PLU No.(digit) Weight(digit)WW.WWW Kg

1 2XCCCCAWWWWWB

CCCC (4) WWWWW (5)

2 2XCCCCAWWWWWB

2XCCCC (4) WWWWW (5)

3 2XCCCCCWWWWWB

CCCCC (4) WWWWW (5)

4 2XDCCCCWWWWWB

CCCC (4) WWWWW (5)

5 2XDDCCCWWWWWB

CCC (4) WWWWW (5)

A,B : Check Digit ( A is neglected) D,DD : Scale ID (This is neglected)

2X BAR CODE TYPE for Unit PriceTYPENo.

EAN/JAN (13digits)X = 0 - 9

PLU No.(digit) Unit Price (digit)

6 2XCCCCCAPPPPB 2XCCCCC (7) PPPP (4)

7 2XCCCCAPPPPPB 2XCCCC (6) PPPPP (5)

8 2XCCCCCPPPPPB 2XCCCCC (7) PPPPP (5)

9 2XCCCCPPPPPPB 2XCCCC (6) PPPPPP (6)

A,B : Check Digit ( A is neglected)

(8) 02 TYPE of BAR CODE

The 02 type of bar code can be read by the scanner. The 02 type of bar code is the following EAN/JAN(13 digits bar code) for the unit price of goods. You can select The 02 type of bar code by the option flag No.41.

02 BAR CODE TYPETYPE EAN/JAN (13digits) PLU No.(digit) Unit Price (digit)

1 02CCCCCAPPPPB 2CCCCC (6) PPPP (4)

2 02CCCCAPPPPPB 2CCCC (5) PPPPP (5)

3 02CCCCCPPPPPB 2CCCCC (6) PPPPP (5)

A,B : Check Digit ( A is neglected)

　-95- DPRTLR.01.01

3. SCALE CONNECTION

THE SCALE (PD-1 by CAS) CAN BE CONNECTED TO THE ECR. YOU MAY CONNECT THE SCALE TO ONE OF RS-232C SERIAL PORTS(PORT-#1,#3,#4).

(1) INTERFACE SPECIFICATION



* Character Format : Start bit + ASCII code + Parity bit + Stop bit (1 bit) (7 bits) (1 bit) (1 bit)

* Parity : Even Parity

(2) CONNECTION

ECR side SCALE side DSUB9 DSUB25 Received Data (RXD) 2 5 (TXD) Transmitted Data (TXD) 3 6 (RXD) Signal Ground (SG) 5 23 (SG) Data Terminal Ready (DTR) 4 Data Set Ready (DSR) 6 Clear To Send (CTS) 8


　-96- DPRTLR.01.01


(3) PROTOCOL

ECR SCALE COMMAND

ECR SCALE RESPONSE

COMMAND : 'W'(57H)

RESPONSE : WEIGHT1 byte5 bytes1 byte

STX WEIGHT CR

02H Kg = XX.XXX 0Dh

( The decimal pint character is ignored.)

RESPONSE : ERROR1 byte1 byte1 byte1 byte

STX '?' STATUS CR

02H 3FH 0DH

STATUS : Bit4 = 1 : CENTER OF ZERO Bit2 = 1 : UNDER ZERO Bit1 = 1 : OUT OF RANGE Bit0 = 1 : MOTION

　-97- DPRTLR.01.01

4. EXTERNAL PRINTER CONNECTION

THE SLIP PRINTER (TM-290II or TM-U295 BY SEIKO EPSON), TERMINAL PRINTER(EPSON TM300 SERIES) CAN BE CONNECTED TO THE ECR. YOU MAY CONNECT A PRINTER TO ONE OF RS-232C PORTS(PORT-#1,#3,#4).The Kitchen printer port is fixed to port #4


* Hardware Interface : Asynchronous Serial (RS-232C level) * Baud Rate : 9600 bps * Character Format : Start bit + ASCII code + Stop bit (1 bit) (8 bits) (1 bit)

(2) CONNECTION

PORT#1,#3,#4 ECR side TM-SERIES DSUB9 DSUB25 1 (FG) Received Data (RXD) 2 2 (TXD) Transmitted Data (TXD) 3 3 (RXD) Data Terminal Ready (DTR) 4 6 (DSR) Signal Ground (SG) 5 7 (SG) Data Set Ready (DSR) 6 20 (DTR) Clear To Send (CTS) 8 Request To Send (RTS) 7 (+5v) 9

(3) DIP SWITCH SETTINGS

S W 1ONOFF o o o o o o o o o o

- 1 OFF : Prints "?" for data receive error- 2 OFF : Data buffer 512 bytes- 3 OFF : DTR/DSR control- 4 OFF : 8-bit word length- 5 OFF : No parity- 6 OFF : (Odd parity)- 7 OFF : Transmission speed selection- 8 OFF 9600 bps- 9 OFF : Unused-10 OFF : Unused

1 2 3 4 5 6 7 8 9 10

　-98- DPRTLR.01.01


5. EXTERNAL DISPLAY CONNECTION

THE EXTERNAL CUSTOMER DISPLAY (DSP-800) CAN BE CONNECTED TO THE ECR. YOU MAY CONNECT THE DISPLAY TO ONE OF RS-232C SERIAL PORTS(PORT-#1,#3).




* Character Format : Start bit + ASCII code + Stop bit (1 bit) (8 bits) (1 bit)

(2) CONNECTION

PORT #1 ECR side DSP-800 side CN6 DSUB9 1 (FG) Transmitted Data (TXD) 3 3 (RXD) Signal Ground (SG) 5 5 (SG) Clear To Send (CTS) 8 6 (DTR) Data Set Ready (DSR) 6

PORT #3,#4 ECR side DSP-800 side CN6 DSUB9 1 (FG) Transmitted Data (TXD) 3 3 (RXD) Signal Ground (SG) 5 5 (SG) Clear To Send (CTS) 8 6 (DTR)

(3) DIP SWITCH SETTINGS

S W 1ONOFF o o o o o o o o

- 1 OFF : 9600 bps- 2 OFF : Command type selection- 3 OFF : Command type selection- 4 OFF : Command type selection- 5 OFF : Language selection- 6 OFF : Language selection- 7 OFF : Language selection- 8 OFF : Language selection

1 2 3 4 5 6 7 8

　-99- DPRTLR.01.01


(4) CONNECTION OF THE EXTERNAL DISPLAY AND THE SCANNER A BARCODE SCANNER AND THE EXTERNAL DISPLAY CAN CONNECT TO A SERIAL PORT AT THE SAME TIME.

EXAMPLE)

PORT #1 ECR side DSP-800 side CN6 DSUB9 Transmitted Data (TXD) 3 3 (RXD) Clear To Send (CTS) 8 6 (DTR) Data Set Ready (DSR) 6 Signal Ground (SG) 5 5 (SG) SCANNER side DSUB9 (*) (SG) Received Data (RXD) 2 (TXD) (+5v) 9 (+5V)

IN THE CASE OF ABOVE PORT-A CONNECTION, THE SCANNER WORKS WHEN THE EXTERNAL DISPLAY TURN ON.

PORT #3,#4 ECR side DSP-800 side CN6 DSUB9 Transmitted Data (TXD) 3 3 (RXD) Clear To Send (CTS) 8 6 (DTR) Signal Ground (SG) 5 5 (SG) SCANNER side DSUB9 (*) (SG) Received Data (RXD) 2 (TXD) (+5v) 9 (+5V)

(*) REFER TO THE SCANNER PIN ASSIGNMENT OF 2.SCANNER CONNECTION

　-100- DPRTLR.01.01

manual ps2000tl

Documents

basic memory

mdm rst oe

ga tx a1

kyal etbe

epson tm300

od ne psw

main board

print sales