USER MANUAL

7A' ZAX ...... 49 ......... - SOUND

WWW.ZAXSDUND.COM

PROFESSIONAL CONDENSER MICROPHONE

g R~HS A c E O Ce) F@ SFEiEiEi-PRD - MADE IN CHINA

INTRCCUCTICN ZaxSound Condenser Microphone is one of the bestselling wired Mic that is a studio quality condenser microphone offering Cardioid pick-up patterns. It combines quality and unique design developed by ZaxSound to deliver legendary sound for everything from podcasting to recording instruments. It is great for vocals, VoIP, Gaming, Chatting and Webcasting. The benefits from ZaxSound Microphone is the ability to be used with any 35mm jack supported device, or if not available, to be used with any USB supported device, i.e. PC, Laptop, Tablet, Phone or Game Console.

-30

-40

dB -so

-60

-70

-80

ifflffil1,t4Ylfflllti,M Color Black Package Content 1 • Microphone, 1 • Trtpod Stand, 1•

Speaker/Headphone Splitter for Mobile Phones, Tablets and xBox connector, 1 • USB Audio Adapter.

Connectors 3.5mm Jack / USS Adapter

Material Rubber Coated Cable Length 78 Inches Dimensions 1.5 x 5.3 x 1.75 lnches Product Weight 6.5 Ounces Package Weight 12 Ounces

echnical S ecification

NO Parameter SVmbol Condition Limits Unit

Min.Cente Max.

S01sitivitv • 1Khz.S.P.L• 1Pa Od3• 1V/P ·41 · 38 · 35 dB o..t:pu: impe::la,ce ZOUT f• lKhz 680 n

3 OJrre,t Consunntion !DDS vcc.,1.SV RL=6800 150 450 "" 4 Si!J"la to Noise Ratic 5/N f .. 1 Khz , S. P.L• lPa 60 dB

5 De:reasino Voltaae S-VS Vcc-4.SV to 1.0V' ·3 dB 6 Operating Voltage 10 V

7 Maximum irciut S.P.L 110 dB

100 16k Hz

A: Frequency Responce, Magn dB re 1.000Pa/V

20 200 Hz 2k 20k

LAPTOP DR PC INSTALLATION

USE THIS .JACK TYPE TC CONNECT THE MIC TC YCUR PCCRLAPTCP aa NOT USE THE ADAPTER WHEN CONNECTING TD PC DR LAPTOP

@ @

PLEASE FIND DN YOUR LAPTOP DR PC THE INTERFACE MARKED MIC USUALLY IT'S DN THE SIDE DF YOUR LAPTOP, AND DN THE BACK DF YOUR PC

IF YOUR PC DA LAPTOP DOES NOT HAVE THE MIC .JACK MENTIONED ABOVE, PLEASE USE THE USB ADAPTER TD CDND NECT THE MIC TD THE PC

CONNECT THE MIC TD THE USB ADAPTER SECURELY AND MAKE SURE IT TICKS TD THEEl'ID _

PHONE. TABLET DR XBDX INSTALLATION

CONNECT THE MIC CABLE TC THE SPLITTER CABLE MARKEC MICROPHONE THEN CONNECT THE SPLITTER .JACK TC YOUR PHONE CR TABLET. REMOVE YOUR PHONE CASE TC MAKE SURE CONNECTIONS ARE SEC:UREC ANO CABLES WENT ALL THE WAY IN

NOTE THAT THE PHONE SPEAKER WILL BE MUTED WHEN YOU CONNECT THE SPLITTER TD THE PHONE YOU NEED TD CONNECT A SPEAKER TD YOUR PHONE IF YOU STILL NEED TD HEAR ANY VOICE WHILE RECORDING

• • WINDOWS lD INSTALLATION FDR • • 3.SMM AND USB

flayback devices

I ~ fiecording devices

Sounds

Y:olume control options

1. Right Click the Voice Icon on your Windows ( find it in the lower right side) 2. Click on Recording Devices. 3. Choose Recording Tab 4. Click on the new Microphone Device, in case you plugged in the 3.5mm jack, you should see a Mic Jack device, or in case you used the USB adapter, you wil l see a USB Audio Device. Chose the one that you will use. 5. Click on Set Default. 6. Click Properties 7. Click on the Levels Tab 8. Adjust the volume t o the high~ est. 9. Adjust the Boost to the Lowest, Depending on your OS, you might need to go to the Custom Tab and uncheck AGC option. 10. Click Ok 11. Click OK

MAl<E SURE IT'S NOT CHECKED

Sound

ecording Sounds Conmuncations

Select a recording devict below t o modify its sdtings:

Configure

..

Microphone 2- USB Audio Device Default Device

.... Microphone Array Properties

• 01 100 ~

Miuophon,Boost

OR

---

.. i

• IDS INSTALLATION

CLICK DN EXTRAS THEN VDICEMEMD

New Recording

PRESS THE RED BUTTON TD START RECORDING

TAB THE MIC FEW TIMES TD M~E SURE TI-E SDUNJ SOURCE 15 THE MIC ITSELF Iii ANDROID INSTALLATION

TRCUBLE SHCCTING GUICE Recommended recording software: Audacity Download it from: http:/ /www.audacityteam.org/

I barely can hear my voice using this microphone: This is a Cardioid Microphone, this means it picks up the voice ONLY from the front side, eliminating all the surrounding noise from the sides or the back, if you try to speak from the sides or the back, the voice will be far. So locate where the ZaxSound Logo, and that is the front side.

I put the microphone in my PC/Laptop but there is no voice: First, please check the Jack on your PC, does it have a microphone icon or written MI C on it? If not , use only the MIC (or microphone icon) jack in your PC. If you used others, i.e. Line-IN or Stereo, this Micro­phone cannot work because it requires phantom power, and the only jack can provide it is the MI C jack. In this case, use the USB Adapter in the package, connect the Mic to the MIC side of the adapter and make sure the connection is secured all the way in.

I put the microphone in my PC/Laptop MIC Jack but it is not picking up any voice: make sure you have set the Microphone as the default source of recording. Please do the Following: 1. Right click the volume icon and click on recording devices 2. Locate your microphone from the list and click one t ime on it, then click set default button.

I have BUZZING sound: You might have had the microphone Boost set to its maximum levels. This Microphone is a high sensitive condenser microphone, there is no need to boost it, please reduce the level or set it up to O (recommend­ed), to do so : 1. Right click the volume icon and cl ick on recording devices 2. Locate your microphone from the list and double click on it 3. On microphone properties, select Levels, and under microphone boost, adjust the level to O. 4. If there was no microphone boost, go to custom tab, and uncheck AGC option.

My phone is not picking the microphone sound Please remove the phone case, insert the microphone into the MIC side of the adapter, and insert the adapt­er to your phone, make sure all connections are secured and cables inserted all the way in.

My phone has a random scratching voice when I record with this microphone Try to record without touching the cables, if such noise appears, please do either of the following: 1. check your phone jack by placing your normal headset and record, if you get such a noise, this means your phone jack has a problem, or the App used could be causing the noise. 2. Put the microphone into your PC and try to record and see if such noise appears.

I am using the USB adapter, but my computer is not picking any voice Make sure you securely connected the Microphone the MIC side of the adapter, and inserted it all the way in. After that please do the following to make sure the computer is picking up the voice: 1. Right click the volume icon and click on recording devices 2. Locate your microphone from the list and double click on it 3. Click on the Listen TAB and check the "Listen to this Device" 4. Make sure the "Playback through this device" is set to the correct speakers from the list box. 5. keep the Mic 5"'6 feet away from the computer, then click OK. 6. Speak to the Mic, you should be able to hear your voice back from the speakers as you speak. 7. Uncheck the "Listen to this device" box.

My Computer Does not recognise the USB Adapter The adapter does not need any software or driver to be installed. Please Take the USB Adapter out, replace it firmly back in. if it still does not recgnise it, plase restrat your PC and try placing the adapter again.

ZAXSCUNC CCM