WARNING

For you and other people’s safety, drivers are required to ensure a safe driving. Do remember not to have safe driving affected by watching navigation system or operating the machine

Keep the safey driver, please do not wathc video and operating the machine druning the driving, you should adjust volume of the player to a properly level for hearing the outside clearly.

It is a must to keep disc entrance clean. In case of dust found, an immediate cleaning is needed,the disc with dust can not be placed into the player until it is thoroughly cleaned, otherwise , the dust will be brought into the player with the disc. Frequently in this way for a long-term , playing effect of the machine, will be lowered causing poeer disc reading or mosaic on image.

1

CONTENT

1. CUNCTIONS-----------------------------------------------------------------3

2. INSTALLATION NOTICE---------------------------------------------------3

3. PRECAUTIONS--------------------------------------------------------------3

4. BUTTON AND FACE FUNCTION----------------------------------------4

5. BASIC OPERATIONS-------------------------------------------------------5

6. Background picture or LOGO setup--------------------------------------8

7. Setup operation-------------------------------------------------------------8

8. Radio operation-----------------------------------------------------------14

9. Navigation operation-----------------------------------------------------16

10. DVD operation-------------------------------------------------------------16

11. Bluetooth operation-------------------------------------------------------17

12. USD/SD player operation------------------------------------------------18

13. External connection input operation-----------------------------------19

14. Tv operation----------------------------------------------------------------19

15. Reverse rear view operation--------------------------------------------19

16. Remote control function------------------------------------------------20

17. Main technical parameters-----------------------------------------------23

18. Trouble shooting------------------------------------------------------------23

2

1. Function information

DVD Playing compatible (DVD-R, DVD-RW, VCD, SVCD, CD, WMA, MP4, MP3, AVI, DIVX, 3.X/JPEG) etc format disc

Built in Bluetooth free phone call functions Built in GPS navigation functions Support 3D maps functions Support multi-language switch functions Card type full functions remote controller Built in AM/FM radio function HD digital screen(800x480 resolution)and have touch screen will show main

menu Support back/rear camera functions Digital TV (analog TV ) functions IPOD playing functions

2. INSTALLATION NOTICE

This player is used in the vehicle with car 12V power supply， please do not directly install this player in a truck or bus, otherwise, damages may be caused to the player. It is required to perform connection according to the instructions, improper connection may possibly cause failure or damage against car power supply system. Negative pole(-) of the speaker is connected to the cable with black edge of the lead. It is strictly prohibited to connect it with metal part of the car. Or connect with negative pole of each speaker. You can not power it on until making sure that all connections are properly made.

If with no guide of professionals, you are not recommednded to replace improper fuse. That may cause damage against the player or fir accident.

Please do not with electriferous operation when install cable for unit.

3. PRECAUTIONS

2.In case of any operation affecting driving, please do not operate until parking the car at a safe place.

Do not operate it at extreme high or low temperature. Before powering on the player, make sure that temperature in the car ranges + 6 0 - - 2 0℃;

3

4. BUTTON AND FACE FUNCTION

Power On/ Off

In power- off state, click button ( / SRC) in the panel to power the

player on. If to press and hold power button for ≥3 S, the system will automatically power off. ( If the player is installed in the car, you may power the player on with the car key, and plug the car key out to power it off. When the system detects power disconnection, it will automatically power off. IR remote window Infrared signal from the remote controller can be received through this window for function operation. MIC window In Bluetooth mode, this window is for voice communication by Bluetooth handfree function. RESET window This window is for reset. In case of fail of operation, press this ( RES button) to make the system back to the initial state. ( Gently press a small article with tip into the reset hole for operation. ) USB port 2 . 0 port adopted for transmitting MP3 /MP4 /MP5 / JPG file in the device at high speed. SD port To insert SD/MMC card and read MP3 /MP4 /MP5 / JPG file doted in the card. GPS port Support navigation map , data SD card MUTE button Short press this button to close volume output, and press it again to recover the former volume level. And can re-press :main menu- radio- main menu, cycle changer main menu. GPS button Press one time into navigation menu, press again then back navigation menu FM button Press one time into radio menu, press again then back radio band DVD Button If the unit have dvd , you press this button can into dvd player station 4 BAND waveband switch In radio mode, press ( BAND) button to change radio waveband in the following sequence: FM1→FM2→FM3→ AM1→AM2→FM1

In play mode, press this button to select among three systems: PAL﹥AUTO﹥NTSC. In analog TV mode, press this button to select TV system in the following sequence: SECAM→PAL M→PAL N→NTSC→PAL I Notice: without this function when play TV EQ button Click the Original Sound Button again and again to set Pop, Rock, Classic and Smooth style. DBAS button

DBAS on/off button, press one time is for turn on DBAS, press again is for turn off DBAS.

AMS button

Press this button will show search for the previous frequency.

Notice: up the operation for some model not for all,

5. BASIC OPERATION

Switch the power on, and the machine will enter the FM menu, ,as show below picture1:

PICTURE 1

In radio status, point the top right icon or press “menu” button on the panel

then enter first main menu, as shown below picture 2(and where menu point the icon will back before menu, press :menu” dircetly back first menu. Picture2: 5

PICTURE 2 5.1 In the first menu have GPS, DICS, FM BLUETOOTH, TIME atc four

function icon, point different function will into different menu.

In the first menu ,touch the clock icon 2s, will into clock menu. As

shown below picture3.

PICTURE 3 （1） At this menu, touch the top right of clock button, it is will show out,

then can use hand or pen to adjust clock, later touch clock right small button, and back to before menu, then finish adjust clock setup

（2） In the first menu ,touch the clock top icon , will into clock menu. As shown below picture4.

PICTURE 4 System have 5 clock choose, if you interest which one ,you choose it

5.2 In the first menu ,touch the clock below point, will show into the below picture, such as picture 5, and picture 6. Can also use the touch pen, finger on the screen to the left and right sliding switch to display 1, 2, 3 main interface.

PICTURE 5 PICTURE 6

5.3 in the 2 main interface screen have TV,AUX INPUT, IPOD, VIRTUAL DISC, USB,SD, TV, set the eight feature icon. Click on each function icon to enter the function menu interface!

5.4 four functions in the 3 main interface screen have SCREEN WALLPAPER, ORIGINAL CAR INFORMATION, COMPASS,CALCULATOR icon. Click on each function icon respectively to enter the function menu interface! Note: the original car information bar set only with the agreement box models

5.5 Click on the icon in the upper left corner of the main interface ，switch 1, 2, 3, three of the arrangement of the main interface features icons! such as picture 7

PICTURE 7

5.6 Repeatedly clicks on the icon in the upper right corner of the main interface screen , you can adjust the screen brightness of the display order: dark → Close → bright!

5.7 Background picture or LOGO setup

Click on the "wallpaper" icon in the main interface, the screen wallpaper setting interface, such as below picture8. Click on the picture you want to set as wallpaper to complete the wallpaper set!

PICTURE 8 PICTURE 9 Click on the icon to enter the logo setup, such as picture 9. Click logo and confirmation to complete the setup The local system default of 11 wallpapers and 11 startup screen. If you want to set your own photo wallpaper, startup screen, you can set the photo as the number of 800x480, and then copying the photos to the GPS memory card, then click to select photos

6. Setting function operations

Click button at the interface to enter Setting interface, such as below

picture 10

PICTURE 10 In the setting interface,can into the navigation Setting, Video Setting, Audio Setting, time setting, steer wheel control setting, General settings, serial setting,Touch Setting and System Setting.

6.1 Click on the "Navigation Settings" icon, enter the navigation path setting, such as below picture 11

PICTURE 11 Note: The first time you insert the GPS card is required to set the navigation path.otherwise, navigation can not be work! Navigation paths need to be set to "\ NaviOne \ NaviOne.exe", the configuration steps are as follows: The map card into the GPS port, and then click "Settings" icon in the main interface, click on "Navigation Settings", then double-click the \ NaviOne \, point up and down arrows on the right, find \ NaviOne.exe file, double-click the file to complete the set

6.2 Click on the "Video Settings" icon, enter the video settings interface, such as below picture 12

PICTURE 12 In this video brightness, after reversing the driving ban player settings.

Note: The "travel ban Play" is set to "ON" while driving can not play video

6.3 Click on the icon of the "Audio Settings" to enter the audio settings interface, Such as below picture13

PICTURE 13 This include sound quality, volume, front / rear / left / right channel balance, keypad tones, such as loudness, navigation, mixing, and other settings.

Click icon to repeat the sound settings, according to sound off →

Pop → rock → classical → sound Guan order cycling. Click on the icon to turn off the audio function. Click on the arrow ▲, ▼, ◄, ►, and adjust the / / left / right channel balance. ◄ ► icon, click "touch-tone below the display ON, said Turn on key tones

Click on the "loudness" below ◄ ► icon, display 0N, open, and loudness; Click Navigation mixing the following ◄ ► icon to display the 0N, that can be normal in the navigation mode to listen to radio, playing music.

6.4 Click on the "Time Settings" icon, enter the time setting interface, such as below picture 14.

PICTURE 14

Time, date, time mode, and time zone settings in this interface ! Click or slide the corresponding map or digital to setting. Finally, point icon to store the settings. 6.5 Click on the icon of the touch calibration, enter the interface of the touch

calibration, such as below picture 15. PICTURE 15

Click "Yes" icon to enter the calibration interface with the touch pen according to 1 → 2 → 3 → 4 → 5 order click on the cross cursor at the center of calibration!

6.6 Steering wheel operations 6.6.1 Operational conditions for steering wheel (a) . The original car must be attached with the steering wheel unction, and the functions of the main parts can be controlled through the buttons of the steering wheel. (b) . The function of the steering wheel is used for the non- bus mastering steering wheel on the original car. (c) . The keypad on the steering wheel of the original car is controlled through voltage input ( i. e. every operation on the button will input signal to the machine) . 6.6.2 During installation, find the ground wire for the steering wheel of the original car. the controlling wire of the button have two wires in general , the power line of the button on the steering wheel is + 5 V.Connect to the wire for the steering wheel attached in the machine, according to the voltage and functions of the machine. 6.6.3 Key function settings

a. Click on the icon of the "steering wheel" to enter the steering wheel buttons function set interface picture 16.

PICTURE 16 b. The key voltage read: press the steering wheel buttons, each press of a button , a voltage value displayed on the top of the screen box

c.Set of key functions: Click the "assigned" icon on the screen, click on a just read the voltage value of the box, then click a "highly resistant" For the allocation of the right of the symbol of the end of anti-function keys. This completes a key feature set. Repeat the above steps, and finally click "OK" to complete the steering wheel button function set. Incorrectly configured, or to re-set, click the "Reset" icon on the screen before proceeding. In addition, the special key lines of some models, you must first to select models 6.6.4 High resistance and low resistance to a key role in function.

Is based on the size of the internal resistance of some models of the original car steering wheel to adjust the use. Such as read button voltage value, press the button on the steering wheel, the screen voltage value is not displayed, click on the screen "high resistance" or "low resistance" icon to read the key voltage

7. Click on the "General Settings" icon, and then enter the password "888888", click on the "√" icon into the general settings interface. The system default interface language setting. In the settings of this interface to select language, regional radio and television system, the system standard, can bus settings. Interface language settings, slide up and down the language needed to move to the middle position, it means have selected that language, such as below picture 17.

PICTURE 17 7.1 Click on the icon of the radio region, set the radio region such as picture

18 .

This interface can choose where to listen to the radio area. Click on the icon of the region, and lit a small point, Indicated that they had to select the region

PICTURE 18

7.2 Click on the icon of the television system to enter the TV system settings interface, such as below picture 19.

PICTURE 19

Click on the ◄ ► arrow to select the local broadcast television system! 7.3 Click on the "system standard" icon to enter the system setting interface picture 20.

PICTURE 20

In this interface may choose to turn on / off the system function. Press the ◄ ► arrow display ON, means that this feature is turned on. In 1, 2, 3 the main interface ,the icons for the open function is displayed. Notice: 1. Whether an open function is available, there have a decision by the

machine ultimately! 2. this system does not contain a "virtual disc" function; 3.Please do not change the settings of the "system standard" content

7.4 Click "can bus Settings" icon to enter the can bus settings interface, such as below picture 21.

PICTURE 21 This system is only built-in protocol data for some models! Press the arrow keys to find the required models, selected according to the icon to confirm. Some models, with the agreement box, but in this set

7.5 Click on the "Version Information" icon into the system version information display interface ,such as below picture 22.

PICTURE 22

8. Click on the icon of the serial port settings, enter the serial port settings interface

9. Radio setting Click the radio icon in the main interface or "FM" radio button on the panel to enter the radio interface, such as below picture 23.

PICTURE 23 9.1 At radio interface, click or icon,a 0.05MHz frequency up or down to

search for radio stations, such as press and hold for three seconds, then automatically search for a station downward or upward, automatically stops when have searched radio stations and play the frequency radio.

9.2 Click icon for more than 3 seconds ,from the FM1 → FM2 → FM3 → AM1,→ AM2 band automatically received and stored in P1/P2/P3/P4/P5/P6 where each band can store 6 stations. press or

search for radio station, you can also click on the icon P1/P2/P3/P4/P5/P6 to stored in the appropriate storage area.

9.3 Click on the icon to audition each band the inside P1/P2/P3/P4/P5/P6 storage stations from FM1→FM2→FM3→AM1→AM2, each frequency for 5 seconds. you can also directly click one of P1/P2/P3/P4/P5/P6 icon to directly listen

9.4 Click on this icon, you can directly enter the frequency listen, such as below picture 24.

PICTURE 24 Directly enter a number then point the icon to confirm

9.5 Click on the icon to enter the sound settings. 9.6 Click on the icon to turn on/off the loudness switch 9.7 Click on the icon to turn on/off the stereo switch.

If the received signal is weak, please turn off the stereo function to improve the listening experience! Listen to the strong signal, please turn on the stereo function to listen to the stereo

10. Navigation basic operation button Click the navigation icons in the main interface or press the GPS button On the surface of the shell to enter the navigation interface(Must be inserted effective GPS card) such as below picture 24

picture 24

Side of the screen, right side, lower side have some icons, click on the icon of each function, a variety of navigation features can be set or operating.

On the navigation interface, can only perform the navigation function. For other operation, need to exit the navigation interface. Press the "GPS" button on the shell surface, you can exit the navigation function returns other state

When play the radio, DVD, Bluetooth, TV mode,press the "GPS" button to enter the navigation screen (press the "GPS" button againto exit the navigation screen).such as voice prompts can be normal to enjoy the original music when the navigation to the need to turn is detected, the system immediately cut off the original music and broadcast navigation voice prompts, and then automatically switch to the original music playback.

Navigation in detail, please read the relevant navigation manual

11. Disc operation Can be in any mode, into the dish. Screen display after the disc into the disc the mouth of the machine ，the disc automatically inhalation, its reading status screen

WhenIts reading disc,free touch screen, the bottom of the screen will display the action bar. Click on the corresponding function icon, you can perform various operations , such as below picture 25.

PICTURE 25 If you want to remove the disc in the machine, press on the surface shell " " button or button on the remote control, the disc is automatically out. If the disc is not removed within 10 seconds, the disc in turn automatically inhalation disc position

State of the disc in the disc storage, click the disc icon in the main interface, or "DVD" button on the shell surface to enter the DVD / VCD / CD disc play status

12. Bluetooth operation 12.1 The phone to the Bluetooth feature is turned on, and enter the scan, find the status of Bluetooth devices around, the phone starts to search for nearby Bluetooth devices . picture 26.

PICTURE 26

Search Bluetooth devices, cell phones on the list of the models of Bluetooth devices to search, Bluetooth Model "LJD”, select the machine on the phone and pair connection, the phone will automatically complete the Bluetooth connection with the machine (Note: some models of mobile phones need to enter the passkey: 0000 and confirmed in order to complete the connection), on the top right of the screen of the machine on will display Bluetooth marked.

Click on the number keys to enter the phone call, and then click on the icon

to dial.

12.2 Click on the icon , choose telephone calls, received calls, missed phone number to dial, such as below picture 27.

PICTURE 27

12.3. Click on the icon will play the MP3 in your phone through the car , such as picture 28. Note: after Bluetooth connectivity, player MP3 in the mobile phone,then can to control MP3 play in the machine.

12.4. Click on the icon to enter the telephone user interface, as shown in picture 29. Click on the icon to copying all contacts telephone numbe in the phone to the phone book of the machine to facilitate follow-up call. Click on the icon and icon to delete the phone numder in the book phone

PICTURE 28 PICTURE 29

13. USB/SD Play When you insert the USB devices, SD or MMC card in the relevant ports, the machine will read the content of the files and play them automatically. If there are pictures, movies or other format files, the machine will read the audio format first.

After Play, touch screen, it will display the action bar at the bottom of the screen. Click on the corresponding function icon, you can perform various operations such as below picture 30 31.

PICTURE 30 PICTURE 31 18 After exit the USB (U disk, MP3 players, etc.) or SD, MMC Card Player,if you want to play the file again, click the USB icon or SD card icon in the main interface

14. External connection input operation

In the main interface, Click on the icon to enter externalconnection mode,

or press button MODE of the remote controller to switch to input mode. In case of no external signal inserted, the interface displayed is as shown in picture 32 . When the signal is received,it is displayed in full screen.

PICTURE 32

Connect the external audio and video signal to the input port. ( Refer to Page 4 for connection. ) 15. TV operation (optional feature)

Click the TV icon in the main interface to enter the television viewing interface. for the first time, the screen does not show, you need to search the storage channel operation. Click on the menu to find the icon for the channel search. After the channel search, the search channel automatically saved and then can choose any TV channel to watch. 16. Reverse rear view operation If your car is equipped with reverse rear view camera, please connect reverse control cable “BACK” with the camera control terminal, video input is connected with video output end of the camera. During car reverse, push level device to the position of reverse. No

matter which image is shown in the display, it will switch to reverse rear view image. At completion of reverse, change the level \ device to the position of going forward. The display will automatically switch to the current image. Note: (“Reversing function” must be set to “On”. Otherwise, reverse rear view image can not be watched. )

19

17. IPOD function operation 1、Enter ipod mode In the main menu, Click on the icon “ipod” to enter this function operation. ( External ipod machine inserted is required. ) . In case of no“ipod”inserted, the system detects fail in connection of equipment, or in any mode to insert an external “ipod” machine, it can automatically change to“ipod”mode, as shown in the interface of picture 33 below:

PICTURE 33

This system is equipped with 8 types of file folder for storing corresponding files. Touch the file fold to open this file and play the first song or file.

( 2) Introduction to the touch button Click this button to select the previous track, press for 3 seconds to enable FB function. Click this button to select the next track, press for 3 seconds to enable FF function. Click this button to play or pause the track. Click this button for the first time to mute, click again to unmute. Click this button to select any tracks

Click this button to re-select in case of wrong selection and over selections. Click this button to play after selection. Click this button to delete the tracks previously selected

For example: Double click the button to select the files to enter track name selection, double click again to play. Click Audio functi on to return to the files.

Move the cursor to select the files or tracks downwards. Move the cursor to select the files or tracks upwards.