manuale elicottero ah-1w
DESCRIPTION
Thunder Tiger AH-1W SuperCobra GunshipTRANSCRIPT
-
Must be purchased separately
Apply C.A Glue
Assemble in right order
Drill holes with the specified diameter
Cut off shaded portion
Ensure smooth, non-binding movement when assembling
Pay close attention here
Cut off excess
Apply threadlocker
Apply C.A Glue
Apply C.A Glue
Apply C.A Glue
Cut off shaded portion
Cut off shaded portion
Apply threadlocker
Apply C.A Glue
Assemble left and right side the same way
No.3870
CONTENTSCONTENTS /INTRODUCTION/DISASSEMBLY/ MAIN ROTOR HEAD DISASSEMBLY / TAIL DISASSEMBLY / MAIN CHASSIS DISASSEMBLY / MODIFICATION/ASSEMBLY/ CHASSIS ASSEMBLY / MAIN POTOR HEAD ASSEMBLY / MACHINE GUN ASSEMBLY / TAIL TRANSMISSION ASSEMBLY / ELECTRONIC CONTROL SYSTEM / FRONT BODY AND CANOPY CUTING / FRONT BODY ASSEMBLY / RIGET REAR BODY CUTING / LEFT REAR BODY CUTING / SCALE BODY ASSEMBLY / DECALS / SPARE PARTS / ACCESSORIES / SPECIFICATION / FEATURES /
INTRODUCTION
Thank you for purchasing the Thunder Tiger AH-1W Super Cobra scale helicopter
conversion kit. This conversion kit is designed especially for mini Titan E325. The tail
transmission system and PVC body are included in the kit. There are clear body and
3 types of painting scheme for your choices. You need to disassemble the original
E325 first then follow the assembly steps to get the AH-1W ready. Please retain the
user manual in case you need it for any information or reference.
NOTICE
1.
2.
3.
4.
Hex Wrench
Grease
CA Glue
Hobby Knife
Scissors
Epoxy
AB
TOOLS REQUIRED FOR ASSEMBLY
Nipper
Needle Nose Pliers
Screw Driver
Ball Link Pliers
T22
R48
Anaerobics Retainer
Threadlocking
Rubber Band
Double Side Tap
SYMBOLS USED THROUGHOUT THE MANUAL
Hint
Assembly Manual & Parts CatalogueIntroduction Thank you for purchasing this Thunder Tiger product. This manual includes the steps and instructions required to assemble your AH-1W helicoptor. Please read this manual completely
before attempting to start assembly. Follow the directions in this manual closely to reduce problems during operation. We offer online help on our www.acehobby.com or www.thundertiger.com
and our product specialists are ready to take your call if you have any technical questions. Have fun and enjoy the exciting world of R/C.
mini Titan E325 AH-1W24www.thundertiger.comwww.tiger.com.tw
AH-1W SUPER COBRA GUNSHIP mini Titan E325 CONVERSION KITAH-1W mini Titan E325
This radio-controlled model helicoptor is not a toy! Before assembly, please read this manual thoroughly.
DISASSEMBLY /
1. MAIN ROTOR HEAD DISASSEMBLY /
STEP 1
STEP 2
3. TAIL DISASSEMBLY / (2)
STEP 1
STEP 3
STEP 4
STEP 5
MODIFICATION / (1)
STEP 1
STEP 2
MODIFICATION / (2)
Frame
STEP 1
STEP 2
STEP 2
STEP 1
4. MAIN CHASSIS DISASSEMBLY / STUB WING ASSEMBLY / (1)
MAIN POTOR HEAD ASSEMBLY / MACHINE GUN ASSEMBLY /
AH-1Wmini TitanE325PVC
1.
2.
3.
4.
For further information, contact the AMA at:
Academy of Model Aeronautics
5151 East Memorial Drive
Muncie, IN 47302
(317) 287-1256
A H - I W
DANGER
STEP 2
Check Point
NO.
1
2
3
4
5
6
Description
GUN TUBE
GUN BASE
RUBBER GROMMET
GUN HUB-1
GUN HUB-2
TAPPING SCREW(W/WASHER) M2x10
Qty
1
1
2
1
1
3
Note
NEW(B3)
NEW(B4)
NEW
NEW(B5)
NEW(B2)
NEW
(7)-1- -2-
-3- -4-
-5- -7- -9- -10- -11--13-
-15- -16-
(1)
(2)
(3) (3)
(4)
(6)
(5)
(6)
A B
The parts are subject to change without prior notice due to product improvements and specification changes.
In order to convert the standard E325 into an AH-1W gunship, please follow the steps disassembling the helicopter
first. Please collect the disassembled parts and don't get them lost. You need some of them to proceed the assembly
later, some would be the spares.
AH-1W
STEP 1
STEP 3STEP 7
2. TAIL DISASSEMBLY / (1)
-6-
MODIFICATION /
To proceed the converting, some minor modification is needed.Please modify the parts illustrated carefully.
Stub Wing
-8-
CHASSIS ASSEMBLY / (2)NO.
1
2
3
4
Description
LANDING SKID
SKID DAMPER
BATTERY SIDE PLATE(R)
BATTERY SIDE PLATE(L)
Qty
1
4
1
1
Note
NEW
NEW
NEW(A4)
NEW(A5)
NO.
5
6
7
8
Description
CANOPY RETAINING POST(L)
CANOPY RETAINING POST(R)
FRAME SPACER
RECEIVER BASE PLATE
Qty
1
1
1
1
Note
NEW(A3)
NEW(A2)
NEW(A1)
NEW(B12)
(1)
(2)
(2)
(4)
(5)
(8)
(6)
-14-
(2)
(2)
Clear Tap
STEP 6
STEP 1
STEP 2
STEP 3
STEP 4
STEP 1
STEP 2
STEP 3
-12-
ASSEMBLY /
After disassembly and modification, plwase follow the steps to re-build the model. Please also note some of the
disassmbled parts are necessities.
(3)
STEP 1
STEP 2
STUB WING NEW(B1)
STEP 4
STEP 3
STEP 3
R/C models are not toys. This product is a high-precision flying machine.Possibilities
of unexpected crashes may occur due to electronic interference, incorrect operation,
or poor mechanical maintenance. Although it is a small-sized helicopter, the rotor
blades rotate at high speeds, which may cause serious damage, injury, or death if
the model hits people or property. Therefore, extreme caution must be exercised
during operation.
Thunder Tiger ensures parts packaged in this product is of the highest quality.However,
after assembly and usage, parts damaged due to wear or misuse will not be replaced
under any circumstances. If you have any questions regarding its operation and
repair, Thunder Tigers service agents are able to provide free technical guidance.
This product is only recommended for users ages 16 and up. Because flying a R/C
helicopter is difficult, beginners must receive guidance and supervision from experienced
pilots to minimize unexpected danger. Practice in spacious areas, far away from
obstacles such as buildings, trees, electrical towers, or crowds.
To decrease the cost of repair and maintenance for beginners, it is recommended
to fly the helicopter with a practice rack and to learn basic flying skills with a computer
R/C flying simulator. (Crashes in simulators are free to repair!)
....
Operating a model helicopter requires a high degree of responsibility and skill. If
you are a newcomer to the hobby, it is best to seek help and guidance from accomplished
model helicopter pilots. This will greatly speed up the learning process and have you
flying successfully in a reasonable amount of time. We also would strongly urge you
to join the Academy of Model Aeronautics. The AMA is a non-profit organization that
provides its members with a liability insurance plan as well as monthly magazine entitled
Model Aviation. All AMA charter aircraft clubs require all pilots to hold a current AMA
sporting license prior to operation of their models at club fields.
1/20 SCALE
ASSEMBLY / 12
1
2
4
5
6
8
9
12
13
15
16
17
23
24
25
26
27
28
31
34
36
37
37
(7)
-
Must be purchased separately
Apply C.A Glue
Assemble in right order
Drill holes with the specified diameter
Cut off shaded portion
Ensure smooth, non-binding movement when assembling
Pay close attention here
Cut off excess
Apply threadlocker
Apply C.A Glue
Apply C.A Glue
Apply C.A Glue
Cut off shaded portion
Cut off shaded portion
Apply threadlocker
Apply C.A Glue
Assemble left and right side the same way
No.3870
CONTENTSCONTENTS /INTRODUCTION/DISASSEMBLY/ MAIN ROTOR HEAD DISASSEMBLY / TAIL DISASSEMBLY / MAIN CHASSIS DISASSEMBLY / MODIFICATION/ASSEMBLY/ CHASSIS ASSEMBLY / MAIN POTOR HEAD ASSEMBLY / MACHINE GUN ASSEMBLY / TAIL TRANSMISSION ASSEMBLY / ELECTRONIC CONTROL SYSTEM / FRONT BODY AND CANOPY CUTING / FRONT BODY ASSEMBLY / RIGET REAR BODY CUTING / LEFT REAR BODY CUTING / SCALE BODY ASSEMBLY / DECALS / SPARE PARTS / ACCESSORIES / SPECIFICATION / FEATURES /
INTRODUCTION
Thank you for purchasing the Thunder Tiger AH-1W Super Cobra scale helicopter
conversion kit. This conversion kit is designed especially for mini Titan E325. The tail
transmission system and PVC body are included in the kit. There are clear body and
3 types of painting scheme for your choices. You need to disassemble the original
E325 first then follow the assembly steps to get the AH-1W ready. Please retain the
user manual in case you need it for any information or reference.
NOTICE
1.
2.
3.
4.
Hex Wrench
Grease
CA Glue
Hobby Knife
Scissors
Epoxy
AB
TOOLS REQUIRED FOR ASSEMBLY
Nipper
Needle Nose Pliers
Screw Driver
Ball Link Pliers
T22
R48
Anaerobics Retainer
Threadlocking
Rubber Band
Double Side Tap
SYMBOLS USED THROUGHOUT THE MANUAL
Hint
Assembly Manual & Parts CatalogueIntroduction Thank you for purchasing this Thunder Tiger product. This manual includes the steps and instructions required to assemble your AH-1W helicoptor. Please read this manual completely
before attempting to start assembly. Follow the directions in this manual closely to reduce problems during operation. We offer online help on our www.acehobby.com or www.thundertiger.com
and our product specialists are ready to take your call if you have any technical questions. Have fun and enjoy the exciting world of R/C.
mini Titan E325 AH-1W24www.thundertiger.comwww.tiger.com.tw
AH-1W SUPER COBRA GUNSHIP mini Titan E325 CONVERSION KITAH-1W mini Titan E325
This radio-controlled model helicoptor is not a toy! Before assembly, please read this manual thoroughly.
DISASSEMBLY /
1. MAIN ROTOR HEAD DISASSEMBLY /
STEP 1
STEP 2
3. TAIL DISASSEMBLY / (2)
STEP 1
STEP 3
STEP 4
STEP 5
MODIFICATION / (1)
STEP 1
STEP 2
MODIFICATION / (2)
Frame
STEP 1
STEP 2
STEP 2
STEP 1
4. MAIN CHASSIS DISASSEMBLY / STUB WING ASSEMBLY / (1)
MAIN POTOR HEAD ASSEMBLY / MACHINE GUN ASSEMBLY /
AH-1Wmini TitanE325PVC
1.
2.
3.
4.
For further information, contact the AMA at:
Academy of Model Aeronautics
5151 East Memorial Drive
Muncie, IN 47302
(317) 287-1256
STEP 2
Check Point
NO.
1
2
3
4
5
6
Description
GUN TUBE
GUN BASE
RUBBER GROMMET
GUN HUB-1
GUN HUB-2
TAPPING SCREW(W/WASHER) M2x10
Qty
1
1
2
1
1
3
Note
NEW(B3)
NEW(B4)
NEW
NEW(B5)
NEW(B2)
NEW
(7)-1- -2-
-3- -4-
-5- -7- -9- -10- -11--13-
-15- -16-
(1)
(2)
(3) (3)
(4)
(6)
(5)
(6)
A B
The parts are subject to change without prior notice due to product improvements and specification changes.
In order to convert the standard E325 into an AH-1W gunship, please follow the steps disassembling the helicopter
first. Please collect the disassembled parts and don't get them lost. You need some of them to proceed the assembly
later, some would be the spares.
AH-1W
STEP 1
STEP 3STEP 7
2. TAIL DISASSEMBLY / (1)
-6-
MODIFICATION /
To proceed the converting, some minor modification is needed.Please modify the parts illustrated carefully.
Stub Wing
-8-
CHASSIS ASSEMBLY / (2)NO.
1
2
3
4
Description
LANDING SKID
SKID DAMPER
BATTERY SIDE PLATE(R)
BATTERY SIDE PLATE(L)
Qty
1
4
1
1
Note
NEW
NEW
NEW(A4)
NEW(A5)
NO.
5
6
7
8
Description
CANOPY RETAINING POST(L)
CANOPY RETAINING POST(R)
FRAME SPACER
RECEIVER BASE PLATE
Qty
1
1
1
1
Note
NEW(A3)
NEW(A2)
NEW(A1)
NEW(B12)
(1)
(2)
(2)
(4)
(5)
(8)
(6)
-14-
(2)
(2)
Clear Tap
STEP 6
STEP 1
STEP 2
STEP 3
STEP 4
STEP 1
STEP 2
STEP 3
-12-
ASSEMBLY /
After disassembly and modification, plwase follow the steps to re-build the model. Please also note some of the
disassmbled parts are necessities.
(3)
STEP 1
STEP 2
STUB WING NEW(B1)
STEP 4
STEP 3
STEP 3
R/C models are not toys. This product is a high-precision flying machine.Possibilities
of unexpected crashes may occur due to electronic interference, incorrect operation,
or poor mechanical maintenance. Although it is a small-sized helicopter, the rotor
blades rotate at high speeds, which may cause serious damage, injury, or death if
the model hits people or property. Therefore, extreme caution must be exercised
during operation.
Thunder Tiger ensures parts packaged in this product is of the highest quality.However,
after assembly and usage, parts damaged due to wear or misuse will not be replaced
under any circumstances. If you have any questions regarding its operation and
repair, Thunder Tigers service agents are able to provide free technical guidance.
This product is only recommended for users ages 16 and up. Because flying a R/C
helicopter is difficult, beginners must receive guidance and supervision from experienced
pilots to minimize unexpected danger. Practice in spacious areas, far away from
obstacles such as buildings, trees, electrical towers, or crowds.
To decrease the cost of repair and maintenance for beginners, it is recommended
to fly the helicopter with a practice rack and to learn basic flying skills with a computer
R/C flying simulator. (Crashes in simulators are free to repair!)
....
Operating a model helicopter requires a high degree of responsibility and skill. If
you are a newcomer to the hobby, it is best to seek help and guidance from accomplished
model helicopter pilots. This will greatly speed up the learning process and have you
flying successfully in a reasonable amount of time. We also would strongly urge you
to join the Academy of Model Aeronautics. The AMA is a non-profit organization that
provides its members with a liability insurance plan as well as monthly magazine entitled
Model Aviation. All AMA charter aircraft clubs require all pilots to hold a current AMA
sporting license prior to operation of their models at club fields.
1/20 SCALE
ASSEMBLY / 12
1
2
4
5
6
8
9
12
13
15
16
17
23
24
25
26
27
28
31
34
36
37
37
(7)
-
Must be purchased separately
Apply C.A Glue
Assemble in right order
Drill holes with the specified diameter
Cut off shaded portion
Ensure smooth, non-binding movement when assembling
Pay close attention here
Cut off excess
Apply threadlocker
Apply C.A Glue
Apply C.A Glue
Apply C.A Glue
Cut off shaded portion
Cut off shaded portion
Apply threadlocker
Apply C.A Glue
Assemble left and right side the same way
No.3870
CONTENTSCONTENTS /INTRODUCTION/DISASSEMBLY/ MAIN ROTOR HEAD DISASSEMBLY / TAIL DISASSEMBLY / MAIN CHASSIS DISASSEMBLY / MODIFICATION/ASSEMBLY/ CHASSIS ASSEMBLY / MAIN POTOR HEAD ASSEMBLY / MACHINE GUN ASSEMBLY / TAIL TRANSMISSION ASSEMBLY / ELECTRONIC CONTROL SYSTEM / FRONT BODY AND CANOPY CUTING / FRONT BODY ASSEMBLY / RIGET REAR BODY CUTING / LEFT REAR BODY CUTING / SCALE BODY ASSEMBLY / DECALS / SPARE PARTS / ACCESSORIES / SPECIFICATION / FEATURES /
INTRODUCTION
Thank you for purchasing the Thunder Tiger AH-1W Super Cobra scale helicopter
conversion kit. This conversion kit is designed especially for mini Titan E325. The tail
transmission system and PVC body are included in the kit. There are clear body and
3 types of painting scheme for your choices. You need to disassemble the original
E325 first then follow the assembly steps to get the AH-1W ready. Please retain the
user manual in case you need it for any information or reference.
NOTICE
1.
2.
3.
4.
Hex Wrench
Grease
CA Glue
Hobby Knife
Scissors
Epoxy
AB
TOOLS REQUIRED FOR ASSEMBLY
Nipper
Needle Nose Pliers
Screw Driver
Ball Link Pliers
T22
R48
Anaerobics Retainer
Threadlocking
Rubber Band
Double Side Tap
SYMBOLS USED THROUGHOUT THE MANUAL
Hint
Assembly Manual & Parts CatalogueIntroduction Thank you for purchasing this Thunder Tiger product. This manual includes the steps and instructions required to assemble your AH-1W helicoptor. Please read this manual completely
before attempting to start assembly. Follow the directions in this manual closely to reduce problems during operation. We offer online help on our www.acehobby.com or www.thundertiger.com
and our product specialists are ready to take your call if you have any technical questions. Have fun and enjoy the exciting world of R/C.
mini Titan E325 AH-1W24www.thundertiger.comwww.tiger.com.tw
AH-1W SUPER COBRA GUNSHIP mini Titan E325 CONVERSION KITAH-1W mini Titan E325
This radio-controlled model helicoptor is not a toy! Before assembly, please read this manual thoroughly.
DISASSEMBLY /
1. MAIN ROTOR HEAD DISASSEMBLY /
STEP 1
STEP 2
3. TAIL DISASSEMBLY / (2)
STEP 1
STEP 3
STEP 4
STEP 5
MODIFICATION / (1)
STEP 1
STEP 2
MODIFICATION / (2)
Frame
STEP 1
STEP 2
STEP 2
STEP 1
4. MAIN CHASSIS DISASSEMBLY / STUB WING ASSEMBLY / (1)
MAIN POTOR HEAD ASSEMBLY / MACHINE GUN ASSEMBLY /
AH-1Wmini TitanE325PVC
1.
2.
3.
4.
For further information, contact the AMA at:
Academy of Model Aeronautics
5151 East Memorial Drive
Muncie, IN 47302
(317) 287-1256
STEP 2
Check Point
NO.
1
2
3
4
5
6
Description
GUN TUBE
GUN BASE
RUBBER GROMMET
GUN HUB-1
GUN HUB-2
TAPPING SCREW(W/WASHER) M2x10
Qty
1
1
2
1
1
3
Note
NEW(B3)
NEW(B4)
NEW
NEW(B5)
NEW(B2)
NEW
(7)-1- -2-
-3- -4-
-5- -7- -9- -10- -11--13-
-15- -16-
(1)
(2)
(3) (3)
(4)
(6)
(5)
(6)
A B
The parts are subject to change without prior notice due to product improvements and specification changes.
In order to convert the standard E325 into an AH-1W gunship, please follow the steps disassembling the helicopter
first. Please collect the disassembled parts and don't get them lost. You need some of them to proceed the assembly
later, some would be the spares.
AH-1W
STEP 1
STEP 3STEP 7
2. TAIL DISASSEMBLY / (1)
-6-
MODIFICATION /
To proceed the converting, some minor modification is needed.Please modify the parts illustrated carefully.
Stub Wing
-8-
CHASSIS ASSEMBLY / (2)NO.
1
2
3
4
Description
LANDING SKID
SKID DAMPER
BATTERY SIDE PLATE(R)
BATTERY SIDE PLATE(L)
Qty
1
4
1
1
Note
NEW
NEW
NEW(A4)
NEW(A5)
NO.
5
6
7
8
Description
CANOPY RETAINING POST(L)
CANOPY RETAINING POST(R)
FRAME SPACER
RECEIVER BASE PLATE
Qty
1
1
1
1
Note
NEW(A3)
NEW(A2)
NEW(A1)
NEW(B12)
(1)
(2)
(2)
(4)
(5)
(8)
(6)
-14-
(2)
(2)
Clear Tap
STEP 6
STEP 1
STEP 2
STEP 3
STEP 4
STEP 1
STEP 2
STEP 3
-12-
ASSEMBLY /
After disassembly and modification, plwase follow the steps to re-build the model. Please also note some of the
disassmbled parts are necessities.
(3)
STEP 1
STEP 2
STUB WING NEW(B1)
STEP 4
STEP 3
STEP 3
R/C models are not toys. This product is a high-precision flying machine.Possibilities
of unexpected crashes may occur due to electronic interference, incorrect operation,
or poor mechanical maintenance. Although it is a small-sized helicopter, the rotor
blades rotate at high speeds, which may cause serious damage, injury, or death if
the model hits people or property. Therefore, extreme caution must be exercised
during operation.
Thunder Tiger ensures parts packaged in this product is of the highest quality.However,
after assembly and usage, parts damaged due to wear or misuse will not be replaced
under any circumstances. If you have any questions regarding its operation and
repair, Thunder Tigers service agents are able to provide free technical guidance.
This product is only recommended for users ages 16 and up. Because flying a R/C
helicopter is difficult, beginners must receive guidance and supervision from experienced
pilots to minimize unexpected danger. Practice in spacious areas, far away from
obstacles such as buildings, trees, electrical towers, or crowds.
To decrease the cost of repair and maintenance for beginners, it is recommended
to fly the helicopter with a practice rack and to learn basic flying skills with a computer
R/C flying simulator. (Crashes in simulators are free to repair!)
....
Operating a model helicopter requires a high degree of responsibility and skill. If
you are a newcomer to the hobby, it is best to seek help and guidance from accomplished
model helicopter pilots. This will greatly speed up the learning process and have you
flying successfully in a reasonable amount of time. We also would strongly urge you
to join the Academy of Model Aeronautics. The AMA is a non-profit organization that
provides its members with a liability insurance plan as well as monthly magazine entitled
Model Aviation. All AMA charter aircraft clubs require all pilots to hold a current AMA
sporting license prior to operation of their models at club fields.
1/20 SCALE
ASSEMBLY / 12
1
2
4
5
6
8
9
12
13
15
16
17
23
24
25
26
27
28
31
34
36
37
37
(7)
-
Must be purchased separately
Apply C.A Glue
Assemble in right order
Drill holes with the specified diameter
Cut off shaded portion
Ensure smooth, non-binding movement when assembling
Pay close attention here
Cut off excess
Apply threadlocker
Apply C.A Glue
Apply C.A Glue
Apply C.A Glue
Cut off shaded portion
Cut off shaded portion
Apply threadlocker
Apply C.A Glue
Assemble left and right side the same way
No.3870
CONTENTSCONTENTS /INTRODUCTION/DISASSEMBLY/ MAIN ROTOR HEAD DISASSEMBLY / TAIL DISASSEMBLY / MAIN CHASSIS DISASSEMBLY / MODIFICATION/ASSEMBLY/ CHASSIS ASSEMBLY / MAIN POTOR HEAD ASSEMBLY / MACHINE GUN ASSEMBLY / TAIL TRANSMISSION ASSEMBLY / ELECTRONIC CONTROL SYSTEM / FRONT BODY AND CANOPY CUTING / FRONT BODY ASSEMBLY / RIGET REAR BODY CUTING / LEFT REAR BODY CUTING / SCALE BODY ASSEMBLY / DECALS / SPARE PARTS / ACCESSORIES / SPECIFICATION / FEATURES /
INTRODUCTION
Thank you for purchasing the Thunder Tiger AH-1W Super Cobra scale helicopter
conversion kit. This conversion kit is designed especially for mini Titan E325. The tail
transmission system and PVC body are included in the kit. There are clear body and
3 types of painting scheme for your choices. You need to disassemble the original
E325 first then follow the assembly steps to get the AH-1W ready. Please retain the
user manual in case you need it for any information or reference.
NOTICE
1.
2.
3.
4.
Hex Wrench
Grease
CA Glue
Hobby Knife
Scissors
Epoxy
AB
TOOLS REQUIRED FOR ASSEMBLY
Nipper
Needle Nose Pliers
Screw Driver
Ball Link Pliers
CA T22
R48
Anaerobics Retainer
Threadlocking
Rubber Band
Double Side Tap
SYMBOLS USED THROUGHOUT THE MANUAL
C.A
12
3
Hint
x
Assembly Manual & Parts CatalogueIntroduction Thank you for purchasing this Thunder Tiger product. This manual includes the steps and instructions required to assemble your AH-1W helicoptor. Please read this manual completely
before attempting to start assembly. Follow the directions in this manual closely to reduce problems during operation. We offer online help on our www.acehobby.com or www.thundertiger.com
and our product specialists are ready to take your call if you have any technical questions. Have fun and enjoy the exciting world of R/C.
mini Titan E325 AH-1W24www.thundertiger.comwww.tiger.com.tw
AH-1W SUPER COBRA GUNSHIP mini Titan E325 CONVERSION KITAH-1W mini Titan E325
This radio-controlled model helicoptor is not a toy! Before assembly, please read this manual thoroughly.
DISASSEMBLY /
1. MAIN ROTOR HEAD DISASSEMBLY /
STEP 1
STEP 2
3. TAIL DISASSEMBLY / (2)
STEP 1
STEP 3
STEP 4
STEP 5
MODIFICATION / (1)
STEP 1
STEP 2
MODIFICATION / (2)
Frame
STEP 1
STEP 2
STEP 2
STEP 1
4. MAIN CHASSIS DISASSEMBLY / STUB WING ASSEMBLY / (1)
MAIN POTOR HEAD ASSEMBLY / MACHINE GUN ASSEMBLY /
AH-1Wmini TitanE325PVC
1.
2.
3.
4.
For further information, contact the AMA at:
Academy of Model Aeronautics
5151 East Memorial Drive
Muncie, IN 47302
(317) 287-1256
STEP 2
Check Point
NO.
1
2
3
4
5
6
Description
GUN TUBE
GUN BASE
RUBBER GROMMET
GUN HUB-1
GUN HUB-2
TAPPING SCREW(W/WASHER) M2x10
Qty
1
1
2
1
1
3
Note
NEW(B3)
NEW(B4)
NEW
NEW(B5)
NEW(B2)
NEW
(7)-1- -2-
-3- -4-
-5- -7- -9- -10- -11--13-
-15- -16-
(1)
(2)
(3) (3)
(4)
(6)
(5)
(6)
A B
The parts are subject to change without prior notice due to product improvements and specification changes.
In order to convert the standard E325 into an AH-1W gunship, please follow the steps disassembling the helicopter
first. Please collect the disassembled parts and don't get them lost. You need some of them to proceed the assembly
later, some would be the spares.
AH-1W
STEP 1
STEP 3STEP 7
2. TAIL DISASSEMBLY / (1)
-6-
MODIFICATION /
To proceed the converting, some minor modification is needed.Please modify the parts illustrated carefully.
Stub Wing
-8-
CHASSIS ASSEMBLY / (2)NO.
1
2
3
4
Description
LANDING SKID
SKID DAMPER
BATTERY SIDE PLATE(R)
BATTERY SIDE PLATE(L)
Qty
1
4
1
1
Note
NEW
NEW
NEW(A4)
NEW(A5)
NO.
5
6
7
8
Description
CANOPY RETAINING POST(L)
CANOPY RETAINING POST(R)
FRAME SPACER
RECEIVER BASE PLATE
Qty
1
1
1
1
Note
NEW(A3)
NEW(A2)
NEW(A1)
NEW(B12)
(1)
(2)
(2)
(4)
(5)
(8)
(6)
-14-
(2)
(2)
Clear Tap
STEP 6
STEP 1
STEP 2
STEP 3
STEP 4
STEP 1
STEP 2
STEP 3
-12-
ASSEMBLY /
After disassembly and modification, plwase follow the steps to re-build the model. Please also note some of the
disassmbled parts are necessities.
(3)
STEP 1
STEP 2
STUB WING NEW(B1)
STEP 4
STEP 3
STEP 3
R/C models are not toys. This product is a high-precision flying machine.Possibilities
of unexpected crashes may occur due to electronic interference, incorrect operation,
or poor mechanical maintenance. Although it is a small-sized helicopter, the rotor
blades rotate at high speeds, which may cause serious damage, injury, or death if
the model hits people or property. Therefore, extreme caution must be exercised
during operation.
Thunder Tiger ensures parts packaged in this product is of the highest quality.However,
after assembly and usage, parts damaged due to wear or misuse will not be replaced
under any circumstances. If you have any questions regarding its operation and
repair, Thunder Tigers service agents are able to provide free technical guidance.
This product is only recommended for users ages 16 and up. Because flying a R/C
helicopter is difficult, beginners must receive guidance and supervision from experienced
pilots to minimize unexpected danger. Practice in spacious areas, far away from
obstacles such as buildings, trees, electrical towers, or crowds.
To decrease the cost of repair and maintenance for beginners, it is recommended
to fly the helicopter with a practice rack and to learn basic flying skills with a computer
R/C flying simulator. (Crashes in simulators are free to repair!)
....
Operating a model helicopter requires a high degree of responsibility and skill. If
you are a newcomer to the hobby, it is best to seek help and guidance from accomplished
model helicopter pilots. This will greatly speed up the learning process and have you
flying successfully in a reasonable amount of time. We also would strongly urge you
to join the Academy of Model Aeronautics. The AMA is a non-profit organization that
provides its members with a liability insurance plan as well as monthly magazine entitled
Model Aviation. All AMA charter aircraft clubs require all pilots to hold a current AMA
sporting license prior to operation of their models at club fields.
1/20 SCALE
L R
ASSEMBLY / 12
1
2
4
5
6
8
9
12
13
15
16
17
23
24
25
26
27
28
31
34
36
37
37
(7)
-
Must be purchased separately
Apply C.A Glue
Assemble in right order
Drill holes with the specified diameter
Cut off shaded portion
Ensure smooth, non-binding movement when assembling
Pay close attention here
Cut off excess
Apply threadlocker
Apply C.A Glue
Apply C.A Glue
Apply C.A Glue
Cut off shaded portion
Cut off shaded portion
Apply threadlocker
Apply C.A Glue
Assemble left and right side the same way
No.3870
CONTENTSCONTENTS /INTRODUCTION/DISASSEMBLY/ MAIN ROTOR HEAD DISASSEMBLY / TAIL DISASSEMBLY / MAIN CHASSIS DISASSEMBLY / MODIFICATION/ASSEMBLY/ CHASSIS ASSEMBLY / MAIN POTOR HEAD ASSEMBLY / MACHINE GUN ASSEMBLY / TAIL TRANSMISSION ASSEMBLY / ELECTRONIC CONTROL SYSTEM / FRONT BODY AND CANOPY CUTING / FRONT BODY ASSEMBLY / RIGET REAR BODY CUTING / LEFT REAR BODY CUTING / SCALE BODY ASSEMBLY / DECALS / SPARE PARTS / ACCESSORIES / SPECIFICATION / FEATURES /
INTRODUCTION
Thank you for purchasing the Thunder Tiger AH-1W Super Cobra scale helicopter
conversion kit. This conversion kit is designed especially for mini Titan E325. The tail
transmission system and PVC body are included in the kit. There are clear body and
3 types of painting scheme for your choices. You need to disassemble the original
E325 first then follow the assembly steps to get the AH-1W ready. Please retain the
user manual in case you need it for any information or reference.
NOTICE
1.
2.
3.
4.
Hex Wrench
Grease
CA Glue
Hobby Knife
Scissors
Epoxy
AB
TOOLS REQUIRED FOR ASSEMBLY
Nipper
Needle Nose Pliers
Screw Driver
Ball Link Pliers
T22
R48
Anaerobics Retainer
Threadlocking
Rubber Band
Double Side Tap
SYMBOLS USED THROUGHOUT THE MANUAL
Hint
Assembly Manual & Parts CatalogueIntroduction Thank you for purchasing this Thunder Tiger product. This manual includes the steps and instructions required to assemble your AH-1W helicoptor. Please read this manual completely
before attempting to start assembly. Follow the directions in this manual closely to reduce problems during operation. We offer online help on our www.acehobby.com or www.thundertiger.com
and our product specialists are ready to take your call if you have any technical questions. Have fun and enjoy the exciting world of R/C.
mini Titan E325 AH-1W24www.thundertiger.comwww.tiger.com.tw
AH-1W SUPER COBRA GUNSHIP mini Titan E325 CONVERSION KITAH-1W mini Titan E325
This radio-controlled model helicoptor is not a toy! Before assembly, please read this manual thoroughly.
DISASSEMBLY /
1. MAIN ROTOR HEAD DISASSEMBLY /
STEP 1
STEP 2
3. TAIL DISASSEMBLY / (2)
STEP 1
STEP 3
STEP 4
STEP 5
MODIFICATION / (1)
STEP 1
STEP 2
MODIFICATION / (2)
Frame
STEP 1
STEP 2
STEP 2
STEP 1
4. MAIN CHASSIS DISASSEMBLY / STUB WING ASSEMBLY / (1)
MAIN POTOR HEAD ASSEMBLY / MACHINE GUN ASSEMBLY /
AH-1Wmini TitanE325PVC
1.
2.
3.
4.
For further information, contact the AMA at:
Academy of Model Aeronautics
5151 East Memorial Drive
Muncie, IN 47302
(317) 287-1256
STEP 2
Check Point
NO.
1
2
3
4
5
6
Description
GUN TUBE
GUN BASE
RUBBER GROMMET
GUN HUB-1
GUN HUB-2
TAPPING SCREW(W/WASHER) M2x10
Qty
1
1
2
1
1
3
Note
NEW(B3)
NEW(B4)
NEW
NEW(B5)
NEW(B2)
NEW
(7)-1- -2-
-3- -4-
-5- -7- -9- -10- -11--13-
-15- -16-
(1)
(2)
(3) (3)
(4)
(6)
(5)
(6)
A B
The parts are subject to change without prior notice due to product improvements and specification changes.
In order to convert the standard E325 into an AH-1W gunship, please follow the steps disassembling the helicopter
first. Please collect the disassembled parts and don't get them lost. You need some of them to proceed the assembly
later, some would be the spares.
AH-1W
STEP 1
STEP 3STEP 7
2. TAIL DISASSEMBLY / (1)
-6-
MODIFICATION /
To proceed the converting, some minor modification is needed.Please modify the parts illustrated carefully.
Stub Wing
-8-
CHASSIS ASSEMBLY / (2)NO.
1
2
3
4
Description
LANDING SKID
SKID DAMPER
BATTERY SIDE PLATE(R)
BATTERY SIDE PLATE(L)
Qty
1
4
1
1
Note
NEW
NEW
NEW(A4)
NEW(A5)
NO.
5
6
7
8
Description
CANOPY RETAINING POST(L)
CANOPY RETAINING POST(R)
FRAME SPACER
RECEIVER BASE PLATE
Qty
1
1
1
1
Note
NEW(A3)
NEW(A2)
NEW(A1)
NEW(B12)
(1)
(2)
(2)
(4)
(5)
(8)
(6)
-14-
(2)
(2)
Clear Tap
STEP 6
STEP 1
STEP 2
STEP 3
STEP 4
STEP 1
STEP 2
STEP 3
-12-
ASSEMBLY /
After disassembly and modification, plwase follow the steps to re-build the model. Please also note some of the
disassmbled parts are necessities.
(3)
STEP 1
STEP 2
STUB WING NEW(B1)
STEP 4
STEP 3
STEP 3
R/C models are not toys. This product is a high-precision flying machine.Possibilities
of unexpected crashes may occur due to electronic interference, incorrect operation,
or poor mechanical maintenance. Although it is a small-sized helicopter, the rotor
blades rotate at high speeds, which may cause serious damage, injury, or death if
the model hits people or property. Therefore, extreme caution must be exercised
during operation.
Thunder Tiger ensures parts packaged in this product is of the highest quality.However,
after assembly and usage, parts damaged due to wear or misuse will not be replaced
under any circumstances. If you have any questions regarding its operation and
repair, Thunder Tigers service agents are able to provide free technical guidance.
This product is only recommended for users ages 16 and up. Because flying a R/C
helicopter is difficult, beginners must receive guidance and supervision from experienced
pilots to minimize unexpected danger. Practice in spacious areas, far away from
obstacles such as buildings, trees, electrical towers, or crowds.
To decrease the cost of repair and maintenance for beginners, it is recommended
to fly the helicopter with a practice rack and to learn basic flying skills with a computer
R/C flying simulator. (Crashes in simulators are free to repair!)
....
Operating a model helicopter requires a high degree of responsibility and skill. If
you are a newcomer to the hobby, it is best to seek help and guidance from accomplished
model helicopter pilots. This will greatly speed up the learning process and have you
flying successfully in a reasonable amount of time. We also would strongly urge you
to join the Academy of Model Aeronautics. The AMA is a non-profit organization that
provides its members with a liability insurance plan as well as monthly magazine entitled
Model Aviation. All AMA charter aircraft clubs require all pilots to hold a current AMA
sporting license prior to operation of their models at club fields.
1/20 SCALE
ASSEMBLY / 12
1
2
4
5
6
8
9
12
13
15
16
17
23
24
25
26
27
28
31
34
36
37
37
(7)
-
Must be purchased separately
Apply C.A Glue
Assemble in right order
Drill holes with the specified diameter
Cut off shaded portion
Ensure smooth, non-binding movement when assembling
Pay close attention here
Cut off excess
Apply threadlocker
Apply C.A Glue
Apply C.A Glue
Apply C.A Glue
Cut off shaded portion
Cut off shaded portion
Apply threadlocker
Apply C.A Glue
Assemble left and right side the same way
No.3870
CONTENTSCONTENTS /INTRODUCTION/DISASSEMBLY/ MAIN ROTOR HEAD DISASSEMBLY / TAIL DISASSEMBLY / MAIN CHASSIS DISASSEMBLY / MODIFICATION/ASSEMBLY/ CHASSIS ASSEMBLY / MAIN POTOR HEAD ASSEMBLY / MACHINE GUN ASSEMBLY / TAIL TRANSMISSION ASSEMBLY / ELECTRONIC CONTROL SYSTEM / FRONT BODY AND CANOPY CUTING / FRONT BODY ASSEMBLY / RIGET REAR BODY CUTING / LEFT REAR BODY CUTING / SCALE BODY ASSEMBLY / DECALS / SPARE PARTS / ACCESSORIES / SPECIFICATION / FEATURES /
INTRODUCTION
Thank you for purchasing the Thunder Tiger AH-1W Super Cobra scale helicopter
conversion kit. This conversion kit is designed especially for mini Titan E325. The tail
transmission system and PVC body are included in the kit. There are clear body and
3 types of painting scheme for your choices. You need to disassemble the original
E325 first then follow the assembly steps to get the AH-1W ready. Please retain the
user manual in case you need it for any information or reference.
NOTICE
1.
2.
3.
4.
Hex Wrench
Grease
CA Glue
Hobby Knife
Scissors
Epoxy
AB
TOOLS REQUIRED FOR ASSEMBLY
Nipper
Needle Nose Pliers
Screw Driver
Ball Link Pliers
T22
R48
Anaerobics Retainer
Threadlocking
Rubber Band
Double Side Tap
SYMBOLS USED THROUGHOUT THE MANUAL
Hint
Assembly Manual & Parts CatalogueIntroduction Thank you for purchasing this Thunder Tiger product. This manual includes the steps and instructions required to assemble your AH-1W helicoptor. Please read this manual completely
before attempting to start assembly. Follow the directions in this manual closely to reduce problems during operation. We offer online help on our www.acehobby.com or www.thundertiger.com
and our product specialists are ready to take your call if you have any technical questions. Have fun and enjoy the exciting world of R/C.
mini Titan E325 AH-1W24www.thundertiger.comwww.tiger.com.tw
AH-1W SUPER COBRA GUNSHIP mini Titan E325 CONVERSION KITAH-1W mini Titan E325
This radio-controlled model helicoptor is not a toy! Before assembly, please read this manual thoroughly.
DISASSEMBLY /
1. MAIN ROTOR HEAD DISASSEMBLY /
STEP 1
STEP 2
3. TAIL DISASSEMBLY / (2)
STEP 1
STEP 3
STEP 4
STEP 5
MODIFICATION / (1)
STEP 1
STEP 2
MODIFICATION / (2)
Frame
STEP 1
STEP 2
STEP 2
STEP 1
4. MAIN CHASSIS DISASSEMBLY / STUB WING ASSEMBLY / (1)
MAIN POTOR HEAD ASSEMBLY / MACHINE GUN ASSEMBLY /
AH-1Wmini TitanE325PVC
1.
2.
3.
4.
For further information, contact the AMA at:
Academy of Model Aeronautics
5151 East Memorial Drive
Muncie, IN 47302
(317) 287-1256
STEP 2
Check Point
NO.
1
2
3
4
5
6
Description
GUN TUBE
GUN BASE
RUBBER GROMMET
GUN HUB-1
GUN HUB-2
TAPPING SCREW(W/WASHER) M2x10
Qty
1
1
2
1
1
3
Note
NEW(B3)
NEW(B4)
NEW
NEW(B5)
NEW(B2)
NEW
(7)-1- -2-
-3- -4-
-5- -7- -9- -10- -11--13-
-15- -16-
(1)
(2)
(3) (3)
(4)
(6)
(5)
(6)
A B
The parts are subject to change without prior notice due to product improvements and specification changes.
In order to convert the standard E325 into an AH-1W gunship, please follow the steps disassembling the helicopter
first. Please collect the disassembled parts and don't get them lost. You need some of them to proceed the assembly
later, some would be the spares.
AH-1W
STEP 1
STEP 3STEP 7
2. TAIL DISASSEMBLY / (1)
-6-
MODIFICATION /
To proceed the converting, some minor modification is needed.Please modify the parts illustrated carefully.
Stub Wing
-8-
CHASSIS ASSEMBLY / (2)NO.
1
2
3
4
Description
LANDING SKID
SKID DAMPER
BATTERY SIDE PLATE(R)
BATTERY SIDE PLATE(L)
Qty
1
4
1
1
Note
NEW
NEW
NEW(A4)
NEW(A5)
NO.
5
6
7
8
Description
CANOPY RETAINING POST(L)
CANOPY RETAINING POST(R)
FRAME SPACER
RECEIVER BASE PLATE
Qty
1
1
1
1
Note
NEW(A3)
NEW(A2)
NEW(A1)
NEW(B12)
(1)
(2)
(2)
(4)
(5)
(8)
(6)
-14-
(2)
(2)
Clear Tap
STEP 6
STEP 1
STEP 2
STEP 3
STEP 4
STEP 1
STEP 2
STEP 3
-12-
ASSEMBLY /
After disassembly and modification, plwase follow the steps to re-build the model. Please also note some of the
disassmbled parts are necessities.
(3)
STEP 1
STEP 2
STUB WING NEW(B1)
STEP 4
STEP 3
STEP 3
R/C models are not toys. This product is a high-precision flying machine.Possibilities
of unexpected crashes may occur due to electronic interference, incorrect operation,
or poor mechanical maintenance. Although it is a small-sized helicopter, the rotor
blades rotate at high speeds, which may cause serious damage, injury, or death if
the model hits people or property. Therefore, extreme caution must be exercised
during operation.
Thunder Tiger ensures parts packaged in this product is of the highest quality.However,
after assembly and usage, parts damaged due to wear or misuse will not be replaced
under any circumstances. If you have any questions regarding its operation and
repair, Thunder Tigers service agents are able to provide free technical guidance.
This product is only recommended for users ages 16 and up. Because flying a R/C
helicopter is difficult, beginners must receive guidance and supervision from experienced
pilots to minimize unexpected danger. Practice in spacious areas, far away from
obstacles such as buildings, trees, electrical towers, or crowds.
To decrease the cost of repair and maintenance for beginners, it is recommended
to fly the helicopter with a practice rack and to learn basic flying skills with a computer
R/C flying simulator. (Crashes in simulators are free to repair!)
....
Operating a model helicopter requires a high degree of responsibility and skill. If
you are a newcomer to the hobby, it is best to seek help and guidance from accomplished
model helicopter pilots. This will greatly speed up the learning process and have you
flying successfully in a reasonable amount of time. We also would strongly urge you
to join the Academy of Model Aeronautics. The AMA is a non-profit organization that
provides its members with a liability insurance plan as well as monthly magazine entitled
Model Aviation. All AMA charter aircraft clubs require all pilots to hold a current AMA
sporting license prior to operation of their models at club fields.
1/20 SCALE
ASSEMBLY / 12
1
2
4
5
6
8
9
12
13
15
16
17
23
24
25
26
27
28
31
34
36
37
37
(7)
-
Must be purchased separately
Apply C.A Glue
Assemble in right order
Drill holes with the specified diameter
Cut off shaded portion
Ensure smooth, non-binding movement when assembling
Pay close attention here
Cut off excess
Apply threadlocker
Apply C.A Glue
Apply C.A Glue
Apply C.A Glue
Cut off shaded portion
Cut off shaded portion
Apply threadlocker
Apply C.A Glue
Assemble left and right side the same way
No.3870
CONTENTSCONTENTS /INTRODUCTION/DISASSEMBLY/ MAIN ROTOR HEAD DISASSEMBLY / TAIL DISASSEMBLY / MAIN CHASSIS DISASSEMBLY / MODIFICATION/ASSEMBLY/ CHASSIS ASSEMBLY / MAIN POTOR HEAD ASSEMBLY / MACHINE GUN ASSEMBLY / TAIL TRANSMISSION ASSEMBLY / ELECTRONIC CONTROL SYSTEM / FRONT BODY AND CANOPY CUTING / FRONT BODY ASSEMBLY / RIGET REAR BODY CUTING / LEFT REAR BODY CUTING / SCALE BODY ASSEMBLY / DECALS / SPARE PARTS / ACCESSORIES / SPECIFICATION / FEATURES /
INTRODUCTION
Thank you for purchasing the Thunder Tiger AH-1W Super Cobra scale helicopter
conversion kit. This conversion kit is designed especially for mini Titan E325. The tail
transmission system and PVC body are included in the kit. There are clear body and
3 types of painting scheme for your choices. You need to disassemble the original
E325 first then follow the assembly steps to get the AH-1W ready. Please retain the
user manual in case you need it for any information or reference.
NOTICE
1.
2.
3.
4.
Hex Wrench
Grease
CA Glue
Hobby Knife
Scissors
Epoxy
AB
TOOLS REQUIRED FOR ASSEMBLY
Nipper
Needle Nose Pliers
Screw Driver
Ball Link Pliers
T22
R48
Anaerobics Retainer
Threadlocking
Rubber Band
Double Side Tap
SYMBOLS USED THROUGHOUT THE MANUAL
Hint
Assembly Manual & Parts CatalogueIntroduction Thank you for purchasing this Thunder Tiger product. This manual includes the steps and instructions required to assemble your AH-1W helicoptor. Please read this manual completely
before attempting to start assembly. Follow the directions in this manual closely to reduce problems during operation. We offer online help on our www.acehobby.com or www.thundertiger.com
and our product specialists are ready to take your call if you have any technical questions. Have fun and enjoy the exciting world of R/C.
mini Titan E325 AH-1W24www.thundertiger.comwww.tiger.com.tw
AH-1W SUPER COBRA GUNSHIP mini Titan E325 CONVERSION KITAH-1W mini Titan E325
This radio-controlled model helicoptor is not a toy! Before assembly, please read this manual thoroughly.
DISASSEMBLY /
1. MAIN ROTOR HEAD DISASSEMBLY /
STEP 1
STEP 2
3. TAIL DISASSEMBLY / (2)
STEP 1
STEP 3
STEP 4
STEP 5
MODIFICATION / (1)
STEP 1
STEP 2
MODIFICATION / (2)
Frame
STEP 1
STEP 2
STEP 2
STEP 1
4. MAIN CHASSIS DISASSEMBLY / STUB WING ASSEMBLY / (1)
MAIN POTOR HEAD ASSEMBLY / MACHINE GUN ASSEMBLY /
AH-1Wmini TitanE325PVC
1.
2.
3.
4.
For further information, contact the AMA at:
Academy of Model Aeronautics
5151 East Memorial Drive
Muncie, IN 47302
(317) 287-1256
STEP 2
Check Point
NO.
1
2
3
4
5
6
Description
GUN TUBE
GUN BASE
RUBBER GROMMET
GUN HUB-1
GUN HUB-2
TAPPING SCREW(W/WASHER) M2x10
Qty
1
1
2
1
1
3
Note
NEW(B3)
NEW(B4)
NEW
NEW(B5)
NEW(B2)
NEW
(7)-1- -2-
-3- -4-
-5- -7- -9- -10- -11--13-
-15- -16-
(1)
(2)
(3) (3)
(4)
(6)
(5)
(6)
A B
The parts are subject to change without prior notice due to product improvements and specification changes.
In order to convert the standard E325 into an AH-1W gunship, please follow the steps disassembling the helicopter
first. Please collect the disassembled parts and don't get them lost. You need some of them to proceed the assembly
later, some would be the spares.
AH-1W
STEP 1
STEP 3STEP 7
2. TAIL DISASSEMBLY / (1)
-6-
MODIFICATION /
To proceed the converting, some minor modification is needed.Please modify the parts illustrated carefully.
Stub Wing
-8-
CHASSIS ASSEMBLY / (2)NO.
1
2
3
4
Description
LANDING SKID
SKID DAMPER
BATTERY SIDE PLATE(R)
BATTERY SIDE PLATE(L)
Qty
1
4
1
1
Note
NEW
NEW
NEW(A4)
NEW(A5)
NO.
5
6
7
8
Description
CANOPY RETAINING POST(L)
CANOPY RETAINING POST(R)
FRAME SPACER
RECEIVER BASE PLATE
Qty
1
1
1
1
Note
NEW(A3)
NEW(A2)
NEW(A1)
NEW(B12)
(1)
(2)
(2)
(4)
(5)
(8)
(6)
-14-
(2)
(2)
Clear Tap
STEP 6
STEP 1
STEP 2
STEP 3
STEP 4
STEP 1
STEP 2
STEP 3
-12-
ASSEMBLY /
After disassembly and modification, plwase follow the steps to re-build the model. Please also note some of the
disassmbled parts are necessities.
(3)
STEP 1
STEP 2
STUB WING NEW(B1)
STEP 4
STEP 3
STEP 3
R/C models are not toys. This product is a high-precision flying machine.Possibilities
of unexpected crashes may occur due to electronic interference, incorrect operation,
or poor mechanical maintenance. Although it is a small-sized helicopter, the rotor
blades rotate at high speeds, which may cause serious damage, injury, or death if
the model hits people or property. Therefore, extreme caution must be exercised
during operation.
Thunder Tiger ensures parts packaged in this product is of the highest quality.However,
after assembly and usage, parts damaged due to wear or misuse will not be replaced
under any circumstances. If you have any questions regarding its operation and
repair, Thunder Tigers service agents are able to provide free technical guidance.
This product is only recommended for users ages 16 and up. Because flying a R/C
helicopter is difficult, beginners must receive guidance and supervision from experienced
pilots to minimize unexpected danger. Practice in spacious areas, far away from
obstacles such as buildings, trees, electrical towers, or crowds.
To decrease the cost of repair and maintenance for beginners, it is recommended
to fly the helicopter with a practice rack and to learn basic flying skills with a computer
R/C flying simulator. (Crashes in simulators are free to repair!)
....
Operating a model helicopter requires a high degree of responsibility and skill. If
you are a newcomer to the hobby, it is best to seek help and guidance from accomplished
model helicopter pilots. This will greatly speed up the learning process and have you
flying successfully in a reasonable amount of time. We also would strongly urge you
to join the Academy of Model Aeronautics. The AMA is a non-profit organization that
provides its members with a liability insurance plan as well as monthly magazine entitled
Model Aviation. All AMA charter aircraft clubs require all pilots to hold a current AMA
sporting license prior to operation of their models at club fields.
1/20 SCALE
ASSEMBLY / 12
1
2
4
5
6
8
9
12
13
15
16
17
23
24
25
26
27
28
31
34
36
37
37
(7)
-
Must be purchased separately
Apply C.A Glue
Assemble in right order
Drill holes with the specified diameter
Cut off shaded portion
Ensure smooth, non-binding movement when assembling
Pay close attention here
Cut off excess
Apply threadlocker
Apply C.A Glue
Apply C.A Glue
Apply C.A Glue
Cut off shaded portion
Cut off shaded portion
Apply threadlocker
Apply C.A Glue
Assemble left and right side the same way
No.3870
CONTENTSCONTENTS /INTRODUCTION/DISASSEMBLY/ MAIN ROTOR HEAD DISASSEMBLY / TAIL DISASSEMBLY / MAIN CHASSIS DISASSEMBLY / MODIFICATION/ASSEMBLY/ CHASSIS ASSEMBLY / MAIN POTOR HEAD ASSEMBLY / MACHINE GUN ASSEMBLY / TAIL TRANSMISSION ASSEMBLY / ELECTRONIC CONTROL SYSTEM / FRONT BODY AND CANOPY CUTING / FRONT BODY ASSEMBLY / RIGET REAR BODY CUTING / LEFT REAR BODY CUTING / SCALE BODY ASSEMBLY / DECALS / SPARE PARTS / ACCESSORIES / SPECIFICATION / FEATURES /
INTRODUCTION
Thank you for purchasing the Thunder Tiger AH-1W Super Cobra scale helicopter
conversion kit. This conversion kit is designed especially for mini Titan E325. The tail
transmission system and PVC body are included in the kit. There are clear body and
3 types of painting scheme for your choices. You need to disassemble the original
E325 first then follow the assembly steps to get the AH-1W ready. Please retain the
user manual in case you need it for any information or reference.
NOTICE
1.
2.
3.
4.
Hex Wrench
Grease
CA Glue
Hobby Knife
Scissors
Epoxy
AB
TOOLS REQUIRED FOR ASSEMBLY
Nipper
Needle Nose Pliers
Screw Driver
Ball Link Pliers
T22
R48
Anaerobics Retainer
Threadlocking
Rubber Band
Double Side Tap
SYMBOLS USED THROUGHOUT THE MANUAL
Hint
Assembly Manual & Parts CatalogueIntroduction Thank you for purchasing this Thunder Tiger product. This manual includes the steps and instructions required to assemble your AH-1W helicoptor. Please read this manual completely
before attempting to start assembly. Follow the directions in this manual closely to reduce problems during operation. We offer online help on our www.acehobby.com or www.thundertiger.com
and our product specialists are ready to take your call if you have any technical questions. Have fun and enjoy the exciting world of R/C.
mini Titan E325 AH-1W24www.thundertiger.comwww.tiger.com.tw
AH-1W SUPER COBRA GUNSHIP mini Titan E325 CONVERSION KITAH-1W mini Titan E325
This radio-controlled model helicoptor is not a toy! Before assembly, please read this manual thoroughly.
DISASSEMBLY /
1. MAIN ROTOR HEAD DISASSEMBLY /
STEP 1
STEP 2
3. TAIL DISASSEMBLY / (2)
STEP 1
STEP 3
STEP 4
STEP 5
MODIFICATION / (1)
STEP 1
STEP 2
MODIFICATION / (2)
Frame
STEP 1
STEP 2
STEP 2
STEP 1
4. MAIN CHASSIS DISASSEMBLY / STUB WING ASSEMBLY / (1)
MAIN POTOR HEAD ASSEMBLY / MACHINE GUN ASSEMBLY /
AH-1Wmini TitanE325PVC
1.
2.
3.
4.
For further information, contact the AMA at:
Academy of Model Aeronautics
5151 East Memorial Drive
Muncie, IN 47302
(317) 287-1256
STEP 2
Check Point
NO.
1
2
3
4
5
6
Description
GUN TUBE
GUN BASE
RUBBER GROMMET
GUN HUB-1
GUN HUB-2
TAPPING SCREW(W/WASHER) M2x10
Qty
1
1
2
1
1
3
Note
NEW(B3)
NEW(B4)
NEW
NEW(B5)
NEW(B2)
NEW
(7)-1- -2-
-3- -4-
-5- -7- -9- -10- -11--13-
-15- -16-
(1)
(2)
(3) (3)
(4)
(6)
(5)
(6)
A B
The parts are subject to change without prior notice due to product improvements and specification changes.
In order to convert the standard E325 into an AH-1W gunship, please follow the steps disassembling the helicopter
first. Please collect the disassembled parts and don't get them lost. You need some of them to proceed the assembly
later, some would be the spares.
AH-1W
STEP 1
STEP 3STEP 7
2. TAIL DISASSEMBLY / (1)
-6-
MODIFICATION /
To proceed the converting, some minor modification is needed.Please modify the parts illustrated carefully.
Stub Wing
-8-
CHASSIS ASSEMBLY / (2)NO.
1
2
3
4
Description
LANDING SKID
SKID DAMPER
BATTERY SIDE PLATE(R)
BATTERY SIDE PLATE(L)
Qty
1
4
1
1
Note
NEW
NEW
NEW(A4)
NEW(A5)
NO.
5
6
7
8
Description
CANOPY RETAINING POST(L)
CANOPY RETAINING POST(R)
FRAME SPACER
RECEIVER BASE PLATE
Qty
1
1
1
1
Note
NEW(A3)
NEW(A2)
NEW(A1)
NEW(B12)
(1)
(2)
(2)
(4)
(5)
(8)
(6)
-14-
(2)
(2)
Clear Tap
STEP 6
STEP 1
STEP 2
STEP 3
STEP 4
STEP 1
STEP 2
STEP 3
-12-
ASSEMBLY /
After disassembly and modification, plwase follow the steps to re-build the model. Please also note some of the
disassmbled parts are necessities.
(3)
STEP 1
STEP 2
STUB WING NEW(B1)
STEP 4
STEP 3
STEP 3
R/C models are not toys. This product is a high-precision flying machine.Possibilities
of unexpected crashes may occur due to electronic interference, incorrect operation,
or poor mechanical maintenance. Although it is a small-sized helicopter, the rotor
blades rotate at high speeds, which may cause serious damage, injury, or death if
the model hits people or property. Therefore, extreme caution must be exercised
during operation.
Thunder Tiger ensures parts packaged in this product is of the highest quality.However,
after assembly and usage, parts damaged due to wear or misuse will not be replaced
under any circumstances. If you have any questions regarding its operation and
repair, Thunder Tigers service agents are able to provide free technical guidance.
This product is only recommended for users ages 16 and up. Because flying a R/C
helicopter is difficult, beginners must receive guidance and supervision from experienced
pilots to minimize unexpected danger. Practice in spacious areas, far away from
obstacles such as buildings, trees, electrical towers, or crowds.
To decrease the cost of repair and maintenance for beginners, it is recommended
to fly the helicopter with a practice rack and to learn basic flying skills with a computer
R/C flying simulator. (Crashes in simulators are free to repair!)
....
Operating a model helicopter requires a high degree of responsibility and skill. If
you are a newcomer to the hobby, it is best to seek help and guidance from accomplished
model helicopter pilots. This will greatly speed up the learning process and have you
flying successfully in a reasonable amount of time. We also would strongly urge you
to join the Academy of Model Aeronautics. The AMA is a non-profit organization that
provides its members with a liability insurance plan as well as monthly magazine entitled
Model Aviation. All AMA charter aircraft clubs require all pilots to hold a current AMA
sporting license prior to operation of their models at club fields.
1/20 SCALE
ASSEMBLY / 12
1
2
4
5
6
8
9
12
13
15
16
17
23
24
25
26
27
28
31
34
36
37
37
(7)
-
Must be purchased separately
Apply C.A Glue
Assemble in right order
Drill holes with the specified diameter
Cut off shaded portion
Ensure smooth, non-binding movement when assembling
Pay close attention here
Cut off excess
Apply threadlocker
Apply C.A Glue
Apply C.A Glue
Apply C.A Glue
Cut off shaded portion
Cut off shaded portion
Apply threadlocker
Apply C.A Glue
Assemble left and right side the same way
No.3870
CONTENTSCONTENTS /INTRODUCTION/DISASSEMBLY/ MAIN ROTOR HEAD DISASSEMBLY / TAIL DISASSEMBLY / MAIN CHASSIS DISASSEMBLY / MODIFICATION/ASSEMBLY/ CHASSIS ASSEMBLY / MAIN POTOR HEAD ASSEMBLY / MACHINE GUN ASSEMBLY / TAIL TRANSMISSION ASSEMBLY / ELECTRONIC CONTROL SYSTEM / FRONT BODY AND CANOPY CUTING / FRONT BODY ASSEMBLY / RIGET REAR BODY CUTING / LEFT REAR BODY CUTING / SCALE BODY ASSEMBLY / DECALS / SPARE PARTS / ACCESSORIES / SPECIFICATION / FEATURES /
INTRODUCTION
Thank you for purchasing the Thunder Tiger AH-1W Super Cobra scale helicopter
conversion kit. This conversion kit is designed especially for mini Titan E325. The tail
transmission system and PVC body are included in the kit. There are clear body and
3 types of painting scheme for your choices. You need to disassemble the original
E325 first then follow the assembly steps to get the AH-1W ready. Please retain the
user manual in case you need it for any information or reference.
NOTICE
1.
2.
3.
4.
Hex Wrench
Grease
CA Glue
Hobby Knife
Scissors
Epoxy
AB
TOOLS REQUIRED FOR ASSEMBLY
Nipper
Needle Nose Pliers
Screw Driver
Ball Link Pliers
T22
R48
Anaerobics Retainer
Threadlocking
Rubber Band
Double Side Tap
SYMBOLS USED THROUGHOUT THE MANUAL
Hint
Assembly Manual & Parts CatalogueIntroduction Thank you for purchasing this Thunder Tiger product. This manual includes the steps and instructions required to assemble your AH-1W helicoptor. Please read this manual completely
before attempting to start assembly. Follow the directions in this manual closely to reduce problems during operation. We offer online help on our www.acehobby.com or www.thundertiger.com
and our product specialists are ready to take your call if you have any technical questions. Have fun and enjoy the exciting world of R/C.
mini Titan E325 AH-1W24www.thundertiger.comwww.tiger.com.tw
AH-1W SUPER COBRA GUNSHIP mini Titan E325 CONVERSION KITAH-1W mini Titan E325
This radio-controlled model helicoptor is not a toy! Before assembly, please read this manual thoroughly.
DISASSEMBLY /
1. MAIN ROTOR HEAD DISASSEMBLY /
STEP 1
STEP 2
3. TAIL DISASSEMBLY / (2)
STEP 1
STEP 3
STEP 4
STEP 5
MODIFICATION / (1)
STEP 1
STEP 2
MODIFICATION / (2)
Frame
STEP 1
STEP 2
STEP 2
STEP 1
4. MAIN CHASSIS DISASSEMBLY / STUB WING ASSEMBLY / (1)
MAIN POTOR HEAD ASSEMBLY / MACHINE GUN ASSEMBLY /
AH-1Wmini TitanE325PVC
1.
2.
3.
4.
For further information, contact the AMA at:
Academy of Model Aeronautics
5151 East Memorial Drive
Muncie, IN 47302
(317) 287-1256
STEP 2
Check Point
NO.
1
2
3
4
5
6
Description
GUN TUBE
GUN BASE
RUBBER GROMMET
GUN HUB-1
GUN HUB-2
TAPPING SCREW(W/WASHER) M2x10
Qty
1
1
2
1
1
3
Note
NEW(B3)
NEW(B4)
NEW
NEW(B5)
NEW(B2)
NEW
(7)-1- -2-
-3- -4-
-5- -7- -9- -10- -11--13-
-15- -16-
(1)
(2)
(3) (3)
(4)
(6)
(5)
(6)
A B
The parts are subject to change without prior notice due to product improvements and specification changes.
In order to convert the standard E325 into an AH-1W gunship, please follow the steps disassembling the helicopter
first. Please collect the disassembled parts and don't get them lost. You need some of them to proceed the assembly
later, some would be the spares.
AH-1W
STEP 1
STEP 3STEP 7
2. TAIL DISASSEMBLY / (1)
-6-
MODIFICATION /
To proceed the converting, some minor modification is needed.Please modify the parts illustrated carefully.
Stub Wing
-8-
CHASSIS ASSEMBLY / (2)NO.
1
2
3
4
Description
LANDING SKID
SKID DAMPER
BATTERY SIDE PLATE(R)
BATTERY SIDE PLATE(L)
Qty
1
4
1
1
Note
NEW
NEW
NEW(A4)
NEW(A5)
NO.
5
6
7
8
Description
CANOPY RETAINING POST(L)
CANOPY RETAINING POST(R)
FRAME SPACER
RECEIVER BASE PLATE
Qty
1
1
1
1
Note
NEW(A3)
NEW(A2)
NEW(A1)
NEW(B12)
(1)
(2)
(2)
(4)
(5)
(8)
(6)
-14-
(2)
(2)
Clear Tap
STEP 6
STEP 1
STEP 2
STEP 3
STEP 4
STEP 1
STEP 2
STEP 3
-12-
ASSEMBLY /
After disassembly and modification, plwase follow the steps to re-build the model. Please also note some of the
disassmbled parts are necessities.
(3)
STEP 1
STEP 2
STUB WING NEW(B1)
STEP 4
STEP 3
STEP 3
R/C models are not toys. This product is a high-precision flying machine.Possibilities
of unexpected crashes may occur due to electronic interference, incorrect operation,
or poor mechanical maintenance. Although it is a small-sized helicopter, the rotor
blades rotate at high speeds, which may cause serious damage, injury, or death if
the model hits people or property. Therefore, extreme caution must be exercised
during operation.
Thunder Tiger ensures parts packaged in this product is of the highest quality.However,
after assembly and usage, parts damaged due to wear or misuse will not be replaced
under any circumstances. If you have any questions regarding its operation and
repair, Thunder Tigers service agents are able to provide free technical guidance.
This product is only recommended for users ages 16 and up. Because flying a R/C
helicopter is difficult, beginners must receive guidance and supervision from experienced
pilots to minimize unexpected danger. Practice in spacious areas, far away from
obstacles such as buildings, trees, electrical towers, or crowds.
To decrease the cost of repair and maintenance for beginners, it is recommended
to fly the helicopter with a practice rack and to learn basic flying skills with a computer
R/C flying simulator. (Crashes in simulators are free to repair!)
....
Operating a model helicopter requires a high degree of responsibility and skill. If
you are a newcomer to the hobby, it is best to seek help and guidance from accomplished
model helicopter pilots. This will greatly speed up the learning process and have you
flying successfully in a reasonable amount of time. We also would strongly urge you
to join the Academy of Model Aeronautics. The AMA is a non-profit organization that
provides its members with a liability insurance plan as well as monthly magazine entitled
Model Aviation. All AMA charter aircraft clubs require all pilots to hold a current AMA
sporting license prior to operation of their models at club fields.
1/20 SCALE
ASSEMBLY / 12
1
2
4
5
6
8
9
12
13
15
16
17
23
24
25
26
27
28
31
34
36
37
37
(7)
-
Must be purchased separately
Apply C.A Glue
Assemble in right order
Drill holes with the specified diameter
Cut off shaded portion
Ensure smooth, non-binding movement when assembling
Pay close attention here
Cut off excess
Apply threadlocker
Apply C.A Glue
Apply C.A Glue
Apply C.A Glue
Cut off shaded portion
Cut off shaded portion
Apply threadlocker
Apply C.A Glue
Assemble left and right side the same way
No.3870
CONTENTSCONTENTS /INTRODUCTION/DISASSEMBLY/ MAIN ROTOR HEAD DISASSEMBLY / TAIL DISASSEMBLY / MAIN CHASSIS DISASSEMBLY / MODIFICATION/ASSEMBLY/ CHASSIS ASSEMBLY / MAIN POTOR HEAD ASSEMBLY / MACHINE GUN ASSEMBLY / TAIL TRANSMISSION ASSEMBLY / ELECTRONIC CONTROL SYSTEM / FRONT BODY AND CANOPY CUTING / FRONT BODY ASSEMBLY / RIGET REAR BODY CUTING / LEFT REAR BODY CUTING / SCALE BODY ASSEMBLY / DECALS / SPARE PARTS / ACCESSORIES / SPECIFICATION / FEATURES /
INTRODUCTION
Thank you for purchasing the Thunder Tiger AH-1W Super Cobra scale helicopter
conversion kit. This conversion kit is designed especially for mini Titan E325. The tail
transmission system and PVC body are included in the kit. There are clear body and
3 types of painting scheme for your choices. You need to disassemble the original
E325 first then follow the assembly steps to get the AH-1W ready. Please retain the
user manual in case you need it for any information or reference.
NOTICE
1.
2.
3.
4.
Hex Wrench
Grease
CA Glue
Hobby Knife
Scissors
Epoxy
AB
TOOLS REQUIRED FOR ASSEMBLY
Nipper
Needle Nose Pliers
Screw Driver
Ball Link Pliers
T22
R48
Anaerobics Retainer
Threadlocking
Rubber Band
Double Side Tap
SYMBOLS USED THROUGHOUT THE MANUAL
Hint
Assembly Manual & Parts CatalogueIntroduction Thank you for purchasing this Thunder Tiger product. This manual includes the steps and instructions required to assemble your AH-1W helicoptor. Please read this manual completely
before attempting to start assembly. Follow the directions in this manual closely to reduce problems during operation. We offer online help on our www.acehobby.com or www.thundertiger.com
and our product specialists are ready to take your call if you have any technical questions. Have fun and enjoy the exciting world of R/C.
mini Titan E325 AH-1W24www.thundertiger.comwww.tiger.com.tw
AH-1W SUPER COBRA GUNSHIP mini Titan E325 CONVERSION KITAH-1W mini Titan E325
This radio-controlled model helicoptor is not a toy! Before assembly, please read this manual thoroughly.
DISASSEMBLY /
1. MAIN ROTOR HEAD DISASSEMBLY /
STEP 1
STEP 2
3. TAIL DISASSEMBLY / (2)
STEP 1
STEP 3
STEP 4
STEP 5
MODIFICATION / (1)
STEP 1
STEP 2
MODIFICATION / (2)
Frame
STEP 1
STEP 2
STEP 2
STEP 1
4. MAIN CHASSIS DISASSEMBLY / STUB WING ASSEMBLY / (1)
MAIN POTOR HEAD ASSEMBLY / MACHINE GUN ASSEMBLY /
AH-1Wmini TitanE325PVC
1.
2.
3.
4.
For further information, contact the AMA at:
Academy of Model Aeronautics
5151 East Memorial Drive
Muncie, IN 47302
(317) 287-1256
STEP 2
Check Point
NO.
1
2
3
4
5
6
Description
GUN TUBE
GUN BASE
RUBBER GROMMET
GUN HUB-1
GUN HUB-2
TAPPING SCREW(W/WASHER) M2x10
Qty
1
1
2
1
1
3
Note
NEW(B3)
NEW(B4)
NEW
NEW(B5)
NEW(B2)
NEW
(7)-1- -2-
-3- -4-
-5- -7- -9- -10- -11--13-
-15- -16-
(1)
(2)
(3) (3)
(4)
(6)
(5)
(6)
A B
The parts are subject to change without prior notice due to product improvements and specification changes.
In order to convert the standard E325 into an AH-1W gunship, please follow the steps disassembling the helicopter
first. Please collect the disassembled parts and don't get them lost. You need some of them to proceed the assembly
later, some would be the spares.
AH-1W
STEP 1
STEP 3STEP 7
2. TAIL DISASSEMBLY / (1)
-6-
MODIFICATION /
To proceed the converting, some minor modification is needed.Please modify the parts illustrated carefully.
Stub Wing
-8-
CHASSIS ASSEMBLY / (2)NO.
1
2
3
4
Description
LANDING SKID
SKID DAMPER
BATTERY SIDE PLATE(R)
BATTERY SIDE PLATE(L)
Qty
1
4
1
1
Note
NEW
NEW
NEW(A4)
NEW(A5)
NO.
5
6
7
8
Description
CANOPY RETAINING POST(L)
CANOPY RETAINING POST(R)
FRAME SPACER
RECEIVER BASE PLATE
Qty
1
1
1
1
Note
NEW(A3)
NEW(A2)
NEW(A1)
NEW(B12)
(1)
(2)
(2)
(4)
(5)
(8)
(6)
-14-
(2)
(2)
Clear Tap
STEP 6
STEP 1
STEP 2
STEP 3
STEP 4
STEP 1
STEP 2
STEP 3
A H - I W
DANGER
-12-
ASSEMBLY /
After disassembly and modification, plwase follow the steps to re-build the model. Please also note some of the
disassmbled parts are necessities.
(3)
STEP 1
STEP 2
STUB WING NEW(B1)
STEP 4
STEP 3
STEP 3
R/C models are not toys. This product is a high-precision flying machine.Possibilities
of unexpected crashes may occur due to electronic interference, incorrect operation,
or poor mechanical maintenance. Although it is a small-sized helicopter, the rotor
blades rotate at high speeds, which may cause serious damage, injury, or death if
the model hits people or property. Therefore, extreme caution must be exercised
during operation.
Thunder Tiger ensures parts packaged in this product is of the highest quality.However,
after assembly and usage, parts damaged due to wear or misuse will not be replaced
under any circumstances. If you have any questions regarding its operation and
repair, Thunder Tigers service agents are able to provide free technical guidance.
This product is only recommended for users ages 16 and up. Because flying a R/C
helicopter is difficult, beginners must receive guidance and supervision from experienced
pilots to minimize unexpected danger. Practice in spacious areas, far away from
obstacles such as buildings, trees, electrical towers, or crowds.
To decrease the cost of repair and maintenance for beginners, it is recommended
to fly the helicopter with a practice rack and to learn basic flying skills with a computer
R/C flying simulator. (Crashes in simulators are free to repair!)
....
Operating a model helicopter requires a high degree of responsibility and skill. If
you are a newcomer to the hobby, it is best to seek help and guidance from accomplished
model helicopter pilots. This will greatly speed up the learning process and have you
flying successfully in a reasonable amount of time. We also would strongly urge you
to join the Academy of Model Aeronautics. The AMA is a non-profit organization that
provides its members with a liability insurance plan as well as monthly magazine entitled
Model Aviation. All AMA charter aircraft clubs require all pilots to hold a current AMA
sporting license prior to operation of their models at club fields.
1/20 SCALE
ASSEMBLY / 12
1
2
4
5
6
8
9
12
13
15
16
17
23
24
25
26
27
28
31
34
36
37
37
(7)
-
Must be purchased separately
Apply C.A Glue
Assemble in right order
Drill holes with the specified diameter
Cut off shaded portion
Ensure smooth, non-binding movement when assembling
Pay close attention here
Cut off excess
Apply threadlocker
Apply C.A Glue
Apply C.A Glue
Apply C.A Glue
Cut off shaded portion
Cut off shaded portion
Apply threadlocker
Apply C.A Glue
Assemble left and right side the same way
No.3870
CONTENTSCONTENTS /INTRODUCTION/DISASSEMBLY/ MAIN ROTOR HEAD DISASSEMBLY / TAIL DISASSEMBLY / MAIN CHASSIS DISASSEMBLY / MODIFICATION/ASSEMBLY/ CHASSIS ASSEMBLY / MAIN POTOR HEAD ASSEMBLY / MACHINE GUN ASSEMBLY / TAIL TRANSMISSION ASSEMBLY / ELECTRONIC CONTROL SYSTEM / FRONT BODY AND CANOPY CUTING / FRONT BODY ASSEMBLY / RIGET REAR BODY CUTING / LEFT REAR BODY CUTING / SCALE BODY ASSEMBLY / DECALS / SPARE PARTS / ACCESSORIES / SPECIFICATION / FEATURES /
INTRODUCTION
Thank you for purchasing the Thunder Tiger AH-1W Super Cobra scale helicopter
conversion kit. This conversion kit is designed especially for mini Titan E325. The tail
transmission system and PVC body are included in the kit. There are clear body and
3 types of painting scheme for your choices. You need to disassemble the original
E325 first then follow the assembly steps to get the AH-1W ready. Please retain the
user manual in case you need it for any information or reference.
NOTICE
1.
2.
3.
4.
Hex Wrench
Grease
CA Glue
Hobby Knife
Scissors
Epoxy
AB
TOOLS REQUIRED FOR ASSEMBLY
Nipper
Needle Nose Pliers
Screw Driver
Ball Link Pliers
T22
R48
Anaerobics Retainer
Threadlocking
Rubber Band
Double Side Tap
SYMBOLS USED THROUGHOUT THE MANUAL
Hint
Assembly Manual & Parts CatalogueIntroduction Thank you for purchasing this Thunder Tiger product. This manual includes the steps and instructions required to assemble your AH-1W helicoptor. Please read this manual completely
before attempting to start assembly. Follow the directions in this manual closely to reduce problems during operation. We offer online help on our www.acehobby.com or www.thundertiger.com
and our product specialists are ready to take your call if you have any technical questions. Have fun and enjoy the exciting world of R/C.
mini Titan E325 AH-1W24www.thundertiger.comwww.tiger.com.tw
AH-1W SUPER COBRA GUNSHIP mini Titan E325 CONVERSION KITAH-1W mini Titan E325
This radio-controlled model helicoptor is not a toy! Before assembly, please read this manual thoroughly.
DISASSEMBLY /
1. MAIN ROTOR HEAD DISASSEMBLY /
STEP 1
STEP 2
3. TAIL DISASSEMBLY / (2)
STEP 1
STEP 3
STEP 4
STEP 5
MODIFICATION / (1)
STEP 1
STEP 2
MODIFICATION / (2)
Frame
STEP 1
STEP 2
STEP 2
STEP 1
4. MAIN CHASSIS DISASSEMBLY / STUB WING ASSEMBLY / (1)
MAIN POTOR HEAD ASSEMBLY / MACHINE GUN ASSEMBLY /
AH-1Wmini TitanE325PVC
1.
2.
3.
4.
For further information, contact the AMA at:
Academy of Model Aeronautics
5151 East Memorial Drive
Muncie, IN 47302
(317) 287-1256
STEP 2
Check Point
NO.
1
2
3
4
5
6
Description
GUN TUBE
GUN BASE
RUBBER GROMMET
GUN HUB-1
GUN HUB-2
TAPPING SCREW(W/WASHER) M2x10
Qty
1
1
2
1
1
3
Note
NEW(B3)
NEW(B4)
NEW
NEW(B5)
NEW(B2)
NEW
(7)-1- -2-
-3- -4-
-5- -7- -9- -10- -11--13-
-15- -16-
(1)
(2)
(3) (3)
(4)
(6)
(5)
(6)
A B
The parts are subject to change without prior notice due to product improvements and specification changes.
In order to convert the standard E325 into an AH-1W gunship, please follow the steps disassembling the helicopter
first. Please collect the disassembled parts and don't get them lost. You need some of them to proceed the assembly
later, some would be the spares.
AH-1W
STEP 1
STEP 3STEP 7
2. TAIL DISASSEMBLY / (1)
-6-
MODIFICATION /
To proceed the converting, some minor modification is needed.Please modify the parts illustrated carefully.
Stub Wing
-8-
CHASSIS ASSEMBLY / (2)NO.
1
2
3
4
Description
LANDING SKID
SKID DAMPER
BATTERY SIDE PLATE(R)
BATTERY SIDE PLATE(L)
Qty
1
4
1
1
Note
NEW
NEW
NEW(A4)
NEW(A5)
NO.
5
6
7
8
Description
CANOPY RETAINING POST(L)
CANOPY RETAINING POST(R)
FRAME SPACER
RECEIVER BASE PLATE
Qty
1
1
1
1
Note
NEW(A3)
NEW(A2)
NEW(A1)
NEW(B12)
(1)
(2)
(2)
(4)
(5)
(8)
(6)
-14-
(2)
(2)
Clear Tap
STEP 6
STEP 1
STEP 2
STEP 3
STEP 4
STEP 1
STEP 2
STEP 3
-12-
ASSEMBLY /
After disassembly and modification, plwase follow the steps to re-build the model. Please also note some of the
disassmbled parts are necessities.
(3)
STEP 1
STEP 2
STUB WING NEW(B1)
STEP 4
STEP 3
STEP 3
R/C models are not toys. This product is a high-precision flying machine.Possibilities
of unexpected crashes may occur due to electronic interference, incorrect operation,
or poor mechanical maintenance. Although it is a small-sized helicopter, the rotor
blades rotate at high speeds, which may cause serious damage, injury, or death if
the model hits people or property. Therefore, extreme caution must be exercised
during operation.
Thunder Tiger ensures parts packaged in this product is of the highest quality.However,
after assembly and usage, parts damaged due to wear or misuse will not be replaced
under any circumstances. If you have any questions regarding its operation and
repair, Thunder Tigers service agents are able to provide free technical guidance.
This product is only recommended for users ages 16 and up. Because flying a R/C
helicopter is difficult, beginners must receive guidance and supervision from experienced
pilots to minimize unexpected danger. Practice in spacious areas, far away from
obstacles such as buildings, trees, electrical towers, or crowds.
To decrease the cost of repair and maintenance for beginners, it is recommended
to fly the helicopter with a practice rack and to learn basic flying skills with a computer
R/C flying simulator. (Crashes in simulators are free to repair!)
....
Operating a model helicopter requires a high degree of responsibility and skill. If
you are a newcomer to the hobby, it is best to seek help and guidance from accomplished
model helicopter pilots. This will greatly speed up the learning process and have you
flying successfully in a reasonable amount of time. We also would strongly urge you
to join the Academy of Model Aeronautics. The AMA is a non-profit organization that
provides its members with a liability insurance plan as well as monthly magazine entitled
Model Aviation. All AMA charter aircraft clubs require all pilots to hold a current AMA
sporting license prior to operation of their models at club fields.
1/20 SCALE
ASSEMBLY / 12
1
2
4
5
6
8
9
12
13
15
16
17
23
24
25
26
27
28
31
34
36
37
37
(7)