march april 2013
DESCRIPTION
.TRANSCRIPT
7/17/2019 March April 2013
http://slidepdf.com/reader/full/march-april-2013-568e012b267c0 1/82
CA (P) No: 131/02/2013 • ISSN: 0219-5704 • KDN: PPS 1453/11/2012(022879) • www.panelsfurnitureasia.com • MARCH/APRIL
7/17/2019 March April 2013
http://slidepdf.com/reader/full/march-april-2013-568e012b267c0 2/82
IMALPAL
GROUP
7/17/2019 March April 2013
http://slidepdf.com/reader/full/march-april-2013-568e012b267c0 3/82
7/17/2019 March April 2013
http://slidepdf.com/reader/full/march-april-2013-568e012b267c0 4/82
7/17/2019 March April 2013
http://slidepdf.com/reader/full/march-april-2013-568e012b267c0 5/82
Company Registration No: 200001473N
All right s reserve d. Views of writ ers do not necessarily reflect the
views of the Publisher. No part of this publication may be reproduced
in any form or by any means, without prior permission in writing from
the Publisher and copyright owner. Whilst every care is taken to
ensure accuracy of the information in this publication, the Publisher
accepts no liability for damages caused by misinterpretation of
information, expressed or implied, within the pages of the magazine. All
advertisements are accepted on the understanding that the Advertiser
is authorised to publish the contents of the advertisements, and in
this respect, the Advertiser shall indemnify the Publisher against all
claims or suits for libel, violation of right of privacy and copyright
infringements. Panels & Furniture Asia is a controlled-circulation
bi-monthly magazine. It is mailed free-of-charge to readers who meet
a set of criteria. Paid subscription is available to those who do not fit
our terms of control. Please refer to subscription form provided in the
publication for more details.
Editor | Denice Cabel
Contributing Editor (Surfaces & Design)
Kenn Busch | [email protected]
Editor (Chinese Edition) | Chris Si
Feature Writer | Gao Shang • Cui Shun Shun
Graphic Designer | Edwin De Souza
Circulation Executive | Shu Ai Ling
General Manager,
Pablo Beijing & Shanghai | Ellen
Sales Manager, Pablo Shanghai | Ara
Industry Consultants
Winston Chiu
Assoc iate Publ isher | Pamela Buckley
Executive Director | Alistair [email protected]
Publisher | William Pang
Singapore MICA (P) No. 131/02/2013
PABLO PUBLI SHI NG PTE LTD
Panels & Furniture Asia is a member ofPablo Publishing Pte Ltd
Blk 16, Kallang Place, #07-01Singapore 339156
Tel: (65) 6396 7877 • Fax: (65) 6396 7177E-mail: [email protected]
panelsfurnitureasia.com
Malaysian MDF Manufacturers Association
Panels & Furniture Asia
is the of ficial publication of
4 MARCH/APRIL 2013 www.panelsfurnitureasia.com
FROMTHEDESK PANELS & FURNITURE ASIA
March was a very busy month for furnituremakers in the Southeast Asia region. Tradeexhibitions were the order of the day. It startedwith the 18th Malaysian International FurnitureFair (MIFF) in Kuala Lumpur, continued on to theExport Furniture Exhibition (EFE), also in KualaLumpur. These were immediately followedby the International Furniture Fair Singapore(IFFS) in Singapore, the International FurnitureFair Indonesia (IFFINA) in J akarta, the VietnamInternational Furniture & Home Accessories Fair
(VIFA) in Ho Chi Minh, and ended with the Thai International Furniture Fair(TIFF) in Bangkok.
Phew! My fingers are tired from typing these exhibitions, so I’m prettysure anyone who attended all six shows had sore muscles and ac hy feet.Wood industry consultant Mr. Michael Buckley did just that, and survivedto tell us what happened in a special post-show report which we arefeaturing on Page 20.
One of the trends evident in the wooden furniture offerings in theseshows is “dark stained furniture”. There was not much showing of naturalwood colours except for some white and grey furniture, popular in thebedroom, living and patio sectors. The main material used is still tropicalwood, Mr. Buckley observed, although the usage of imported wood canbe seen increasing. Also interesting to note were the expanded display ofPalm-wood furniture in Malaysia and an impressive exhibition of plantationAcacia at EFE, among other showcases.
Countdown to LIGNA and interzum
Speaking of exhibitions, the largest and most important events for thetimber and woodworking industry worldwide as well as the furniture andinterior furnishing industry are just around the c orner. The biennial LIGNAand interzum shows will take place in May, with LIGNA running May 6-10in Hannover, and interzum scheduled from May 13-16 in Cologne. Showorganisers Deutsche Messe AG and Koelnmesse GmbH are coordinatingactivities to make visitors’ travel to the German shows more worthwhilethan ever. Take a peek at what exhibitors have in store for you at LIGNAin our special show preview on Page 58.
We know we say it every trade show season but we actually mean iteach and every time: The Panels & Furniture Asia team will be treadingthe pavements and looking to get around as many booths anddemonstrations as possible. So stay tuned over the coming weeks as werelease interviews and overviews of some of the cool things we will see.
Happy reading!
Denice Cabel
Ed ito r
It’s show
time!
7/17/2019 March April 2013
http://slidepdf.com/reader/full/march-april-2013-568e012b267c0 6/82
7/17/2019 March April 2013
http://slidepdf.com/reader/full/march-april-2013-568e012b267c0 7/82
6 MARCH/APRIL 2013 www.panelsfurnitureasia.com
FROMTHEDESK PANELS & FURNITURE ASIA
Kenn Busch is also p ub lishe r of
www.mater ia l in te l l i gence.com,
and c ont r ibut ing edi tor to Wood
Digest and Inte riors & Sourc es
magazines.
Kenn Busc h
Co ntr ib ut ing Ed itor
Sometimes a disastrous setback gives us the impetus to reconsider and reconfigurethe systems that envelop us.
For instance: When the western Norway town of Ålesund burned to the ground in1904, 52 young architects were given carte blanche to re-imagine the town, resultingin the most modern settlement in Europe (at the time), with electricity, running water,indoor plumbing and street lights. From tragedy, progress.
We know this from nature, where forestfires are a necessary part of the renewa lprocess. When fires are unnaturally suppressed, new growth remains stunted andthe natural evolutionary cycle of the entire ecosystem is retarded for generations, ifnot permanently.
The same is true in markets, where catastrophe is often self-inflicted. This is what Ifear is happening in the panel industry. Limited vision for the value of our own productshas created a pricing debacle, discouraging investment in the next generations ofwood-based dec orative panels.
Why is vinyl a better wood? The delegates at this year’s European Laminates Conference, held in Berlin and or-ganised by Technical Conference Management(www.tcman.at), got a disturbingdose of reality from a German flooring distributor.
To paraphrase: “Consumers who want the look of a wood floor but don’t wantto buy solid wood prefer vinyl over laminate flooring. Even though vinyl is twice theprice, they prefer the warmer feel, quieter sound, and say that the visuals are betterthan in laminate.”
Laminate flooring, at its birth, was seen as a boon for the decorative panel industry.Sadly more effort has been spent reducing costs than responding to the market’sdesires for a better product. In the end, we have a material that the market isn’tvery excited about no matter how much we drop the price. Consumers are willingto pay twice as much for a non-wood material because theyfind its wood proper-ties more appealing.
There are many lessons to be learned from this irony. I had several conversationswith delegates and speakers at the conference, mostly suppliers to the panel industry,and the consensus is that our industry lacks a consensus about its own future.
It’s time we shifted our focus from competing on price to developing superior solu-tions for current market cha llenges (reimagining a better laminatefloor, for instanc e),and to carving out the role of our materials will play in the built environments of the
future.We need to gather the best minds from the R&D departments of every category
of supply to the panel producers – wood fiber, adhesive and resin systems, produc-tion technology, and decor and texture suppliers, and begin to hold workshopswith designers connected to the contract and consumer markets with the goal ofdeveloping radical new ideas.
I welcome your thoughts on this. Let’s not limit ourselves toflooring. Everything’son the table – millwork, furniture, ceiling systems. The future is ours to make. Or lose.
Give evolution
a chance
7/17/2019 March April 2013
http://slidepdf.com/reader/full/march-april-2013-568e012b267c0 8/82
www.dieffenbacher.com
C O M P L E T E PA N E L P L A N T S
The Evolution in Press Technology
– Perfect board tolerances (down to +/- 0,05 mm)
– Wide density range (350 – 1.000 kg/m³)
– High-speed (2.000 mm/s and faster)
– Press width up to 12 ft (4 m)
– Variable width adjustment up to 700 mm
– Low maintenance and easy accessability
LIGNA May 06–10 2013Hanover, Germany
S e e o u r V i d e o
I n v i t a t i o n
7/17/2019 March April 2013
http://slidepdf.com/reader/full/march-april-2013-568e012b267c0 9/82
8 MARCH / APRIL 2013 NEWSLETTER
THE MALAYSIAN MDF MANUFACTURERS ASSOCIATION (MMMA)
In the last edition we discussed the consequences
of the stagnant demand for MDF and other wooden
panel products and the subsequent increase in the
supply capacity. This has caused an imbalance be-
tween supply versus demand and the recent collapse
in prices. As a reminder for readers, economic recovery
in key markets such as the USA, Europe and Japan
have at best been slow, and real growth in develop-
ing markets has not been able to off-set this decline.
This has been further influenced by problems in the
Middle East and a general slow-down in South Asia.
Investments in new capacity which were based on
optimistic demand forecasts from five or six years ago
are now coming on stream. As a result, both MDF and
particleboard prices are at historical lows especially
when inflation is taken into consideration. I would say
that most mills have now reached a point where they
are only recovering their variable costs and have to
manage their cash flow very tightly to survive.
The industry is now approaching a turning point.
If the current low prices cannot stimulate more de-
mand then within the next 12 to 18 months, we could
see some plant closures and/or more major consolida-
tions within the industry.
Unfortunately it is very dif ficult to see where this
increase in demand is going to come from in the short
term. But the fact is MDF and particleboard priceshave never been so low before, so this is the unique
opportunity to find new uses for this versatile material.
Manufacturers in Malaysia have recently been
affected by the newly implemented ‘minimum wage’
for all workers. This has had the immediate effect of
increasing the cost to all industries. The labour inten-
sive furniture manufacturers have been particularly
affected and this has reduced the demand for wood
panels and other furniture components in Malaysia.
We hope that the regional furniture fairs will stimulate
A very unique opportunitybut with very high risk
new orders and demand will pick up.
Malaysia and Asia in general needs to be very
careful on how it manages its currency exchange rate
against the US dollar and how far it lets wage costs
increase. Without the necessary increases in produc-
tivity and value addition, Malaysia and Asia could see
themselves priced out of the global market. One only
needs to see what is happening in Europe to see what
could happen in Asia with more dire consequences.
With the introduction of the single European currency,
countries like Greece, Spain and Portugal were put on
an equal cost structure as Germany. Unfortunately,
those economies were not as productive as Germanyresulting in an economic recession and austerity cuts.
Unemployment in Germany is only 4%, in Greece,
Spain and Portugal they have unemployment of over
25%, even France and Italy has unemployment of over
10%, the potential political turmoil this will cause is yet
to be played out fully.
Near full employment in Asia is critical as most Asian
countries do not have the social welfare infrastructure
in place like in Europe and the USA. Unemployment
rates of more than 5% would be unimaginable for Asia!
By Mr. Peter Fitch,
Chairman of the
MMMA
7/17/2019 March April 2013
http://slidepdf.com/reader/full/march-april-2013-568e012b267c0 10/82
7/17/2019 March April 2013
http://slidepdf.com/reader/full/march-april-2013-568e012b267c0 11/82
10 MARCH/APRIL 2013 www.panelsfurnitureasia.com
by MICHAEL HERMENS
GLOBALTIMBERRESOURCES PANELS & FURNITURE ASIA
Many suppliers and customers alike keep a sking
me what are the current “hot” imported species in
Southeast Asia. And of course with “hot” they mean
those imported species in most demand. The answer
is not so straight forward as each country in South-
east Asia has quite specific demands. For example,
at the recent MIFF exhibition in Kuala Lumpur one
could notice a greater number of suppliers displaying
furniture made from European beech and Ameri-
can tulipwood but, surprisingly, there was hardly
any furniture made from American white oak. Yet
at the IFFINA show in Jakarta there were hardly any
products made from imported species except the
occasionally rustic pine and some veneered white
oak panels. But at the TIFF in Bangkok, one could see
a wide variation of mostly designer’s furniture made
from, for example, American ash, walnut, white oak,
European beech as well imported veneers, etc. Un-
fortunately I was unable to visit the IFFS in Singapore
but understand from my colleagues there was the
usual display of both solid and panel American white
oak (mainly from C hina) and some walnut furniture.
So what causes these vast differences in the use
of imported raw materials in these countries? For
one it surely is related to the previous and current
availability of local timber species. For example, most
furniture manufacturers in Malaysia have been, and
still are, using rubberwood and cater for the relative
low-end export retail markets. So any imported ma-
terial demand is predominantly driven by price and
suitability to produce c heap dining sets or medium-
end bedroom sets.
European beech is most favourable for dining
sets and American tulipwood for bedroom sets since
the bedroom sets will be stained in dark mahogany
colour. Indonesian furniture has always been using
What imported sawn timber speciesare “hot” at present?
a wide variety of local species such as mahogany,
mindi, sengong and, more high-end, teak. All these
species are still in reasonable supply but prices are
increasing so some customers are developing new
lines in, for example, American white oak, walnut
and both clear and rustic pine. Thailand’s TIFF is, from
a design point of view, always the most interesting
show as the range of furniture is very wide from the
usual lower-end rubberwood dining sets to very up-
market designer’s furniture made up of any type of
imported timber, adding value and setting it apart
from the rest. Many of the displayed furniture were
designed by very creative designers targeting not
only the local expat market but also the high-end
export markets in Asia, Europe and J apan.
Coming bac k to the original question about the
species in hot demand in Southeast Asia, I can list a
few as follows:
American white oak — The sudden increased
demand since the fourth quarter of 2012 came as a
surprise. It might have been a result of the poor supply
that is probably hastened due to the bad winter in
the eastern and mid USA. The demand c ontinues to
grow but regretfully the supply seems to get tighter
during the next few months, especially in the lower
grades. J ust a friendly advice: we have been stock-
ing up all the white oak we could get our hands on
to serve our customers in the next few months.
Radiata pine — Many of the mills in New Zealand
are struggling to survive due to the high log prices,
unfavourable exchange rate, high freight costs, and
some face production problems. We have started
to ship larger volumes of pine from South America to
make up for the loss of exports from New Zealand.
American tulipwood (yellow poplar) — This spe-
cies has for many years been a “red hot” favourite
ac ross Asia due to the relative
low price. The demand is very
good but the supply is low. My
guess is that this will improve
over the next few months.
African Sapelli FSC certi-
fied — Not for furniture, but
more and more Southeast
Asian engineered door man-
ufac turers are looking for
alternatives such as African
Sapelli to replace the local
meranti to be able to comply
with the EUTR. The demand foruro pea n beec hEuro pea n b eech R a d ia t a P ineR a d ia t a P ine
7/17/2019 March April 2013
http://slidepdf.com/reader/full/march-april-2013-568e012b267c0 12/82
1www.panelsfurnitureasia.com MARCH/APRIL 2013
PANELS & FURNITURE ASIA GLOBALTIMBERRESOURCES
About the
AUTHORDutc h -bo rn Micha e l Herme ns i s
Ma nag ing Directo r of A PP Timb er,
a t imber imp or t ing co mp any tha t
he found ed near ly 18 years ag o on
the c onvic tion that Southe ast Asia
wil l grow increa singly short o f
raw m ate r ia l as it d evelop s.
The c om pa ny is now the
lead ing reg iona l distribu -
to r o f impor ted t imb er ,
em p l o y in g p eop le i n
Ma laysia, Ind on esia,
Tha i lan d, Vietna m,
India, USA an d Eu-
rope . He pe rma -
ne ntly live s in Kua la
Lum p u r w i t h h i s
Singap o rean w i fe
and tw o bo ys.
a steady long-term supply of sapelli is also good. The
problem is that most African sawmills are fully sold out
on either FSC or non-FSC certified sapelli, and are only
willing to accept new orders for shipment in the third
quarter 2013. And even then many of them seem to
be able to guarantee timely shipment.
European beech — Not really “red hot” yet, but
certainly we noticed a steady increased interest
in the last few months. Loc al manufacturers start
to see the advantage of working with this species
compared to, for example, rubberwood. The good
news about the European beech is that the supply
is very stable and there won’t be any short supply in
the next many years to come.
Based on AHEC’s export data, one has to agree
that American red oak should be number one on
the above list with exports mainly to C hina and Vi-
etnam. Regretfully we, as APP Timber, seem not to
be part of that business and we hardly export any
red oak neither to those countries nor to other Asian
countries. This does not mean that it still is THE most
popular export species from the USA.
So at the end, what does the above mean? It
surely means that prices of the mentioned species will
keep increasing except maybe for European beech,
which makes it a perfec t timber to use for furniture
manufacturing. I also think that we, as suppliers and
overseas buyers of furniture, have to focus on the
promotion of other species suitable for furniture pro-
duction and to be less dependent on these “hot”
spec ies. This will reduce the pressure on the limited
range of species and ensure a more balanced supply
and use of raw materials.
7/17/2019 March April 2013
http://slidepdf.com/reader/full/march-april-2013-568e012b267c0 13/82
Industry at a Glance
12 MARCH/APRIL 2013 www.panelsfurnitureasia.com
NEWSNEWS PANELS & FURNITURE ASIA
The one month class will be held from 15 J uly to 15August 2013 at the NHLA Headquarters in Mem-
phis, Tennessee with the use of Chinese languageinterpreters. Since the National Hardwood LumberAssoc iation (NHLA) was founded in 1898, it has beenstriving to establish a uniform system of gradingrules for the measurement and inspection of Ameri-can hardwood lumber. The growth of the NHLA isclearly evident and none more so than through theannouncement that they are to launch their firstChinese Inspector Training School Class in the USA.It is important to note that Memphis has a majorinternational airport serving more than 10 millionpassengers per year.
The NHLA Inspec tor Training School was founded
in 1948 tofi
ll an increasing demand for skilled hard-wood lumber inspectors. The programme teachesthe rules and application of the NHLA hardwoodlumber grading system and prepares participantsfor a c areer in the hardwood lumber industry. Sinceits founding, the School has graduated more than7,100 registrant’s from around the world.
During the programme, there will be instructionon the grades that are most widely used for theproduction of hardwood flooring. Participants willbe taught the best grades for flooring such as #2ACommon and #3A Common. These are the best fitdue to their adequate yield at lower cost than higher
grade material. Hardwood lumber forflooring hasbeen one of the most widely used and consistently
made products in the US domestic industry, duemainly to its durability and the ability to still look goodafter many years.
During the one month course, c lass hours will befrom 8am to 6pm, Monday to Saturday. Participantsof the programme will also join in scheduled NHLAmember company visits and have the opportunityto network with North American suppliers which willgain valuable experience for their future within the
NHLA to host Chinese Inspector Training Class in July and August 2013
hardwood trade. The Chinese Summer Programme will deliver the
same knowledge and opportunities as the full 14-week programme, but the enhanced schedule andstreamlined curriculum will make the most of the Chi-nese registrant’s time while in the United States. Uponsuccessful completion of the programme, graduateswill be expected to ga in an in-depth knowledge ofthe Standard NHLA G rades and general overview ofthe species exceptions and will receive a certificateof completion.
Tuition for the programme is US$5,000 per studentand is limited to NHLA Members Only. This fee will in-clude tuition, housing, local travel, lunch, airport pickup and drop off and school supplies. Tuition does not
include airfare and personal expenses.NHLA C hief Inspector Dana Spessert says, “Overthe last few years, NHLA has raised its internationalefforts to help improve the demand for North Ameri-can hardwoods globally. Our efforts have led us toincrease our presence in China and Southeast Asia,mostly through the Inspection Services Programme.We have spent many hours of one-on-one trainingwith a number of NHLA Partner Members based inChina, teaching and explaining the NHLA hardwoodlumber grading Rules. We are very pleased to beable to offer ourfirst ever Chinese Inspector TrainingSchool Class to be held at the NHLA headquarters
in Memphis. The class is our latest effort to increasethe knowledge and skill of the hardwood lumbergrading process in China, in an effort to better serveall of our members.”
The NHLA Inspector Training School is part of morethan 110 years of history and has a growing globalfuture which has become evident through this up-coming 2013 summer programme.
To d o wnlo a d a n a p p lic a tio n fo rm inEng l i s h a nd C h i nes e , p l ea s e g o t o :www.inspectortrainingschool.com
7/17/2019 March April 2013
http://slidepdf.com/reader/full/march-april-2013-568e012b267c0 14/82
Industry at a Glan
A new book from the Malaysian Timber Council and co-published with MPH aims to inspire a rchitec ts anddesigners to push the boundaries for using timber in construction.
The prologue and epilogue sections give a worldwide tour of exciting and inspiring projects from NewZealand through Europe to C anada , from a whimsica l Tree House to massive gridshell structures demon-strating new perspectives for using timber in creative and ingenious ways.
The central sections showcase the beauty and durability of Malaysian timber through projects whichre-apprec iate, renew, re-imagine, re-interpret and redefine man’s relationship with his environment. Some
Re-Think: a new paradigm for Malaysian timbers
of the heritage buildings featured are overa hundred years old while modern projectssuch as the avant-garde Henderson Wavesbridge in Singapore are testament to theversatility and flexibility of timber for inno-vative uses. Reinterpretations occur whenarchitects and designers take a fresh lookat vernacular or traditional architecture
and create new expressions sometimesusing new materials and technology.Many resort projects featured in the bookcelebrate local indigenous buildings re-executed with high quality finishes andexquisite craftsmanship.
The authors, Lee C hor Wah, architectand Suria Zainal of MTC conc lude it is timeto re-think not only the use of Malaysiantimber but timber in general for a richerbuilt environment and a greener futurespecifying timber from sustainably man-aged forests.
The book is availab le a t MPH (www.mphonline) and leading bookstores inMalaysia and Singapore.
1www.panelsfurnitureasia.com MARCH/APRIL 2013
NEWSPANELS & FURNITURE ASIA NEWS
7/17/2019 March April 2013
http://slidepdf.com/reader/full/march-april-2013-568e012b267c0 15/82
Industry at a Glance
14 MARCH/APRIL 2013 www.panelsfurnitureasia.com
NEWSNEWS PANELS & FURNITURE ASIA
The China Forest Certification Council (CFCC) hasestablished a platform to facilitate interaction withand between Chinese stakeholders interested inpromoting forest certification. The CFCC StakeholderForum, which was inaugurated recently in Beijing, willmeet several times per year to provide informationand updates about the c ontinuous development ofthe China Forest Certification Scheme (CFCS). TheForum is designed as a mechanism to encourageknowledge and information exchange, enhancetransparency, foster discussions, and ultimately aimsto ensure that forest certification requirements ad-dress the unique Chinese conditions and are alignedwith local management practices and culture.
The inaugural meeting of the Stakeholder Forum,which was chaired by the Secretary General ofCFCC, Ms. Yu Ling, was attended by a wide range oforganizations, included NGOs, companies, certifica-tion bodies, forest industry assoc iations, researchersas well as government representatives.
CFCC Chairman, Wang Wei, outlined progress,key developments and next steps in the develop-ment of the national Chinese forest certificationsystem. Participants welcomed the presentationof two draft standards on Plantation Managementand Bamboo Management by Mr. Lu Wenming,who leads the standard setting working group, andoffered a number of suggestions and potential im-provements, which will be considered by the work-ing group in due course. Technical discussions alsofocussed on the impact of PEFC International’s 2013Chain of Custody standard on its Chinese equivalent.
In an open exchange, stakeholder representa-tives shared their views on various issues and brought
Stakeholders show strong interest inforest certification in China
forward comments and suggestions concerning thefuture of forest certification in China. In his conc ludingremarks, Mr. Wang Wei expressed his desire for futureCFCC Stakeholder Forum meetings to be conductedin a similar cooperative spirit and for the vitality andenthusiasm that participants have shown to be sus-tained. C FCC joined PEFC International in 2011, andsubmitted the C hina Forest Certification Scheme forPEFC endorsement and mutual recognition in 2012.
The endorsement process is ongoing.Participants of the CFCC Stakeholder Forum
Meeting included representatives from MeadWest-vaco China; Bayer Crop Science China Co. Ltd;UPM China; Stora Enso Guangxi Forestry Co. Ltd;
APP China; Bureau Veritas China; SGS-CSTC; BeijingZhonglinTianhe Forest Certification Centre; Heilongji-ang Forestry Industry Group; J ilin Forestry IndustryGroup; Inner Mongolia Forestry Industry Group; WWFChina Of fice; The Nature Conservancy (TNC) ChinaOf fice; International Union for Conservation of Nature(IUCN) China Of fice; China Wildlife ConservationAssociation; Team of Green Field Ark, Beijing GreenCross Center of Ecological Cultural Communica-tions; PEFC China Initiative; European Forest Insti-tute FLEGT Asia Programme; China Timber & WoodProduc ts Distribution Assoc iation; Anti-counterfeitingPackaging Committee of China; Packaging Federa-tion; Chinese Academy of Forestry; Beijing ForestryUniversity; Hebei Agricultural University; Forest Surveyand Planning Design Institute, State Forestry Ad-ministration; Division of Certification Management,Science and Technology Development Centre ofState Forestry Administration, China; China ForestCertification Council (CFCC)
American Lumber Company has expanded theirhardwood ripping services at their Smyrna, New York
and Leitchfield, Kentucky facilities.American Lumber’s customised hardwood rip-
ping program for production of ripped-to-width stripsis ideal for manufacturers across multiple industriesincluding cabinetry, furniture, moulding and flooringoffering additional benefits that increase yield andreduce cost.
With the expansion of this programme into twofac ilities, American Lumber can now offer maximumvolume of ripped strips from our entire inventory ofspecies, grades and thicknesses available.
Advanced hardwood ripping programmePlease visit www.alumber.com for more informationor contact:
American Lumber Company707 West 38th Street Erie, PA 16508Phone: 814-438-7888, (International)888-438-7888, (USA)Fax: 814-438-3086e-mail: [email protected]
7/17/2019 March April 2013
http://slidepdf.com/reader/full/march-april-2013-568e012b267c0 16/82
Industry at a Glan
Baillie Lumber is North America’s largest hardwoodlumber manufacturer, distributor and exporter, pro-viding hardwood logs, lumber and proprietary gradeproducts. Founded in 1923, Baillie has grown froma regional supplier of American hardwoods to aninternational manufacturer offering a full range ofNorth American and exotic species shipping to anyregion of the world.
Baillie’s manufacturing facilities are locatedacross the eastern United States. The company’spartner mills and suppliers in the US and internation-ally supplement its hardwood manufacturing capa-bilities allowing for specie availability unmatched by
other hardwood manufacturers. With a full range ofexotic species from Africa, Asia, and South Americaand a sales staff strategically located worldwide,Baillie is well positioned to be your single source forthe world’s hardwoods.
A single source provider for American andexotic hardwoods
Please visit www.baillie.com for more information orcontact:Baillie Lumber Co.
4002 Legion Drive
Hamburg, NY 14075Phone: 716-649-2850 (International)800-950-2850 (USA)Fax: 716-649-6212email: [email protected]
1www.panelsfurnitureasia.com MARCH/APRIL 2013
NEWSPANELS & FURNITURE ASIA NEWS
7/17/2019 March April 2013
http://slidepdf.com/reader/full/march-april-2013-568e012b267c0 17/82
Industry at a Glance
Homag holds itsfirst ‘In-house Flooring Days’ in Shanghai
Mr Burkhard Engelien
16 MARCH/APRIL 2013 www.panelsfurnitureasia.com
NEWSNEWS PANELS & FURNITURE ASIA
Since 2002, HOMAG has built over 550 doubleend tenoners for the world market in its factory inShanghai. Together with its partners, Homag is alsosupplying equipment for the surface treatment,
sanding and packaging offi
nal products such aslaminate flooring, cork flooring, engineered woodparquet, LVT-flooring and other flooring elements.
In China, the main production site for flooringwithin Asia, HOMAG is now coming to the third gen-eration of production method. In the 90s, many ofthe mac hines were imported from Europe. C hinesecompanies started produc ing entry level machinesonly at the beginning of the century. Now, due torising labour, space and energy costs, more andmore c ompanies are acquiring automated produc-tion lines, e. g. vacuum handling systems for stackingand destacking. Homag is working closely with its
customer base. For this reason, Homag designs andproduces their new types of production lines andmachines locally at HOMAG Machinery Shanghai.
The company will hold itsfirst HOMAG In-house
Flooring Days on 25- 28 March 2013, at 685 Fang TaRoad North, Songjiang County, Shanghai, China.
You are invited to attend the seminar on advancedproduc tion methods for the flooring industry, featur-ing professional lectures and speeches about topicssuch as:• Tooling on LVT and on Laminate Flooring (Leitz +
Leuco)• Automation and cost saving for better competi- tiveness (Dr. Stein, Nanjing Forestry University)• Sanding technology for Engineered Wood Floor- ing (BÜTFERING)• Finishing Technology for Engineered Wood
Flooring (Bürkle)• Innovation of Flooring Technology and machines
(HOMAG)• Market Trend in Flooring in the USA• Introduction of the demonstrated lines: Splitting
line, laminate line and narrow chain line (R. Dengler, HOMAG)
Flooring
HOMAG double end tenoner
Electronic Wood Systems GmbH(EWS) of Germany has namedBurkhard Engelien to the position ofsales direc tor, supporting EWS’s gen-eral manager Hauke Kleinschmidtin worldwide sales and marketingactivities. He’ll start work in April.
Thanks to the cooperation withSiempelkamp and because of new-product innovations, EWS becamemarket leader for quality controland measurement systems for thewood panel industry. The Siem-
Electronic Wood Systems appointssales director
pelkamp measuring system SicoS-can includes EWS technology andhas been standard component ofSiempelkamp plants for a long time.
Based on his work experiencein R&D and after sales service withSiempelkamp Energy Systems, Bur-khard Engelien will now strengthenthe EWS team for new product salesand for modernising existing panelproduction lines by implementingmodern EWS measurement tech-nologies.
7/17/2019 March April 2013
http://slidepdf.com/reader/full/march-april-2013-568e012b267c0 18/82
Industry at a Glan
1www.panelsfurnitureasia.com MARCH/APRIL 2013
NEWSPANELS & FURNITURE ASIA NEWS
Plate furniture has become more popular because
of its economic and environmental features. In plate
furniture production, edges, edge banding equip-
ment and hotmelt adhesives are indispensable. Using
the right adhesive can help improve the production
capacity and product quality.
Choosing the glue is mainly decided by the speed
of the edge-banding machine, the tank tempera-
ture and the different materials of the edge bands.
To cater to different requirements of plate furniture
manfuacturers, Shanghai Rocky Adhesives Co. Ltd
has developed three ranges of hot melt adhesives
for different application temperatures — low, mediumand high.
For low-temperature operation ranging from 130°C
to 150°C, Shanghai Rocky recommends its RY9390. For
medium temperature ranging from 160°C to 180°C,
the RY7542 is recommended. For high temperature
operation ranging from 190°C to 210°C, the Company
has developed three machines with different running
speed. The RY7650 applies to operating speed of 15-
25 m/min. The RY7680 applies to operating speed 25
m/min. And the RY7696 is suitable for machines with
edge band width of more than 30mm or thickness of
more than 5mm, and machine operation speed is
above 25 m/min.When choosing the right hot melt adhesives for
your operation, it should be clear to you what your
machine’s capabilities are, especially the opera-
tion speed, temperature and technique, as well as
material, width and thickness. Only by taking into
account these conditions can the right adhesive be
recommended.
For more information, visit www.shrocky.com.
Shanghai Rocky: Choosingthe right adhesive in plate
furniture production
7/17/2019 March April 2013
http://slidepdf.com/reader/full/march-april-2013-568e012b267c0 19/82
Industry at a Glance
18 MARCH/APRIL 2013 www.panelsfurnitureasia.com
NEWSNEWS PANELS & FURNITURE ASIA
LogSavers® are used to c ontrol existing splits in valu-able logs to prevent splits from increasing in size.As a professional logger in Pennsylvania, USA, J imHiggins created the original LogSavers in 1987 to besafer and easier to use. Traditionally a piece of steelshaped like an “S” was used in the end of a log tohold splits together. Swinging the backside of an axetowards his left hand holding a steel s-iron, in order todrive it into a log, never seemed like a great idea to
J im. After dislocating his indexfinger on his left handwhile working, he knew there had to be a better way.
The innovative idea was to let the hammer holdthe fastener, instead of the logger. Instead of a steelS-Iron staple, he designed a plastic staple calledthe LogSaver that clipped into holes on the face ofa special hammer. This kept the logger’s hands outof the striking zone. The holes on the hammer faceallowed the LogSavers to be held by the LogSaverhammer at a variety of angles. The LogSavers “sta-ple” design yielded many other benefits. By using aspecial high-impact plastic, all the problems causedby metal parts in logs were prevented. There was noneed to remove LogSavers from the log; you could
cut right through them with no damage to sawsor veneer knives. Black iron stains in log ends wereeliminated.
Product Highlights
U-C Coatings
LogSavers® from U-C Coatings improve safety
and performance The LogSavers System was quickly accepted by
numerous logging operations and in 1992, Higginsapproached U•C Coatings to sell and distribute hisnew invention.
“Since U•C Coatings was the leader in woodprotection products, and I’d used ANC HORSEAL formany years,” said J im Higgins, “I knew it would bea good fit.”
While maintaining his job as a logger/buyer, Hig-gins collaborated with UCC President Tom J oheland CEO Norman Murray to bring LogSavers to awider market. U-C Coatings added LogSavers to theirproduc t line and sales increased. “From the outset,it was a win-win situation for U•C Coatings and ourcustomers,” said Tom J oel.
Over the years, customer response led to variousrefinements in the design of the system. A smallerversion, called the FlitchSaver® was developed,the “I-beam” configuration was re-engineered to acurved version, and circular grooves in the hammerfaces replaced the holes. This customer-centeredapproach improved the ease of use and increasedthe accuracy of staple placement; thereby provid-
ing the premier system to control existing c hecks andstress splits in logs.
FlitchSavers applied to a log end to prevent splitscracks fromge tting la rge r.
LogSavers are made to be used with a special LogSavers
ham mer. The plas tic Log Sa ver stap le fits into the circulargroove at any angle.
7/17/2019 March April 2013
http://slidepdf.com/reader/full/march-april-2013-568e012b267c0 20/82
Industry at a Glan
1www.panelsfurnitureasia.com MARCH/APRIL 2013
NEWSPANELS & FURNITURE ASIA NEWSProduct Highlight
In 2012, U-C Coatings Corporation was pleased to welcome J imHiggins to the U-C Coatings sales team. Working in the lumber industrysince he was a teenager, J im brings over 30 years of practical loggingknowledge and sawmill experience to its account team. “Our 20-yearhistory with J im Higgins and the LogSavers product line”, remarked Norm
Murray, “is another example of the way we strive to build strong relation-ships and provide the best wood protection products for our customers.
Today, LogSavers are sold all over the world and U-C Coatings is lookingforward to expand sales of LogSavers and ANCHORSEAL® end sealer in In-
donesia, Southeast Asiaand China. Video dem-onstrating the use of theLogSavers System andANCHORSEAL end sealercan be viewed at www.youtube.com/uccoat-ings. More information
is available at www.uc-coatings.com or e-mailto [email protected]. You ca n see ho w S irons crea te iron
stain on logs, while there is no stainwith plas tic LogSa vers.
You ca n sa w right through Logsa v-
ers, with no harm to sa ws or veneerknives.
7/17/2019 March April 2013
http://slidepdf.com/reader/full/march-april-2013-568e012b267c0 21/82
In 2011, Malaysia exported RM19.8 billion (US$6.33
billion) of timber and wood products. Furniture
accounted for about 33%, exported to around 160
countries. In 2012, it was the 8th largest furnitureexporter in the world and about 78% of shipments are
estimated to be wooden. Under Malaysia’s National
Timber Industry Policy, a target of RM53 billion by
2020 of timber and wood products has been set
according to the current Minister of Plantation
Industries and Commodities YB Tan Sri Bernard
Dompok, who opened both MIFF and EFE in March.
(A general election is expected in April 2013.)
He stated that the government will plant a further
375,000 ha of forests over a 15-year period. He called
on Malaysian manufacturers to “….adopt creative
marketing strategies and ….. more original designed
furniture products…” He concluded by suggesting
that the next step “is to develop Malaysian brand
into famous world names.” The Minister referred to his
launch of the ‘Malaysian Pride’ quality mark a year
ago and noted that, while the US had been the major
market for Malaysian furniture, others from Russia to
Asian markets were now growing. The Malaysian
Furniture Promotion Council (MFPC) is a specialised
promotional body that promotes and develops the
Malaysian furniture industry to establish Malaysia as
a globally recognised source of world-class furniture
and operates the ‘Malaysian Pride’ scheme.
Southeast Asia
furniture roundIn early March, six out of the seven ASEAN regional furniture shows in Southeast Asia were visitedfor this report which focuses on wood-based furniture. Each show was significantly differentfrom the others, reflec ting the materials manufacturers use, the markets they are aiming at, andthe degree to which design is a primary driver. Michael Buckley of World Hardwoods reports:
Malaysia in March effectively had three shows; the
18th Malaysian International Furniture Fair (MIFF) still atthe Putra Trade Centre in KL and now run by UBM, with
most of its traditional exhibitors; MIFF’s sec ond venue
at the MECC (Matrade) on the edge of KL to which
the Muar-based manufac tures from J ohor state have
de-camped for the first time; and the Export Furniture
Exhibition (EFE) in Serdang well away from KL. The net
result is a serious hardworking challenge for anyone
wanting to make a comprehensive tour of the whole of-
fering from Malaysia which would definitely benefit from
one show in one location. Many visitors are frustrated
at the time spent between shows and even between
halls, in the case of the EFE. Some say they leave with
the feeling that they have not been able to see a ll theexhibits in the time they allot, before heading off to
other shows in Southeast Asia and then to China. The
challenge is made worse by the fact that much of the
furniture displayed is familiar, or slightly modified, and a
complete tour is required to discover any new, innova-
tive or fresh collections on offer. The lack of a modern
venue and need for one comprehensive unified show
was the subjec t of much discussion by foreign visitors
and specialist media.
Malaysa n March e ect vely a
MIFF EFE – MalaysiaMIFF & EFE – Malaysia
20 MARCH/APRIL 2013 www.panelsfurnitureasia.com
SPECIALREPORT PANELS & FURNITURE ASIA
MTC s ta ff at MIFF
Aca cia d rewgreat interest
at EFE
7/17/2019 March April 2013
http://slidepdf.com/reader/full/march-april-2013-568e012b267c0 22/82
During the KL week, APS Media organised the
Furniture Leadership Awards dedicated to the
global furniture trade and industries, as one of the
world’s most prestigious international furniture award
programmes. Its objectives are to identify and honour
outstanding furniture and related companies and
entrepreneurs around the world; to build business
and industry role models and set benchmarks; and
to promote the development and advancement of
the international furniture trade. All entries to FLA are
judged by a special independent international panel
that comprises industry authorities, managementstrategists and renowned academics. Scored
using a comprehensive evaluation system devised
by Professor KC Chan, a renowned management
expert, the criteria included considerations of each
company’s leadership and strategies, marketing
and branding, human capital and development,
business process and execution capabilities,
financial and wealth management. APS states that
only companies that met the high standards of the
programme are awarded.
2www.panelsfurnitureasia.com MARCH/APRIL 2013
PANELS & FURNITURE ASIA SPECIALREPORT
MIFF included three design events – a design
competition, furniture excellence award and
best presentation award. The 2013 Furniture
Excellence Gold Awards were won by Hin Lim
Furniture (Household) and NCOMPAS Asia (Of-
fice), and a spec ial J udges Commendation was
awarded to SJY Furniture.At MIFF, bigger by 25% than 2012, much of Malay-
sia’s furniture is still manufactured from Rubberwood,
stained dark in colour for markets in the USA, Middle
East and, to a lesser extent, Europe. Although American
hardwood shipments to Ma laysia have made progress
in recent years (lumber up 50% in volume in 2012), it still
only represents a small percentage of the raw material
supply. Despite the import figures, which show White
Oak furniture as Malaysia’s leading US species, there
seemed to be less Oak on display in KL than in previous
years. Yellow Poplar/Tulipwood, as number two species
imported from the USA, is making inroads into the Rub-
berwood sec tor and despite dark staining was identifi-
able in more furniture offerings than usual. At MIFF’s
second venue at MECC , many of the Muar Furniture
Assoc iation’s 500 members exhibited, spec ialising in
Rubberwood, and are estimated to account for 45%
of Malaysia’s production.
EFE, a third the size of MIFF, maintained its high
standard of presentation despite the transfer of many
Muar-based businesses. EFE represents two furniture
assoc iations, the Malaysian Furniture Manufacturers
Assoc iation (MFEA) and the Malaysian Furniture Industry
Council (MFIC). MFEA’s President, Lor Lean Sen, wel-
coming all to the ‘Malaysia Furniture Week’ called on
manufac turers to “work on more innovative designs….”
and he addressed the strong competition faced in
the region from lower cost countries. Much discussion
throughout both shows focused on Malaysia’s shortage
of affordable labour and raw material needs.
Stain it dark brown and stack it high in Malaysia
Russ ian Ash c ha ir by Ko rea Tec h &Art at EFE
7/17/2019 March April 2013
http://slidepdf.com/reader/full/march-april-2013-568e012b267c0 23/82
(L-R) Des igners J ohn Kelly, NY, Natha n Yong a nd J a rrod Lim fromSinga pore, a ll know n for their America n ha rdwoo d furniture de signs
IFFS – SingaporeIFFS – Singapore
22 MARCH/APRIL 2013 www.panelsfurnitureasia.com
SPECIALREPORT PANELS & FURNITURE ASIA
IFFS was opened by the Minister for Trade and
Industry, Mr Lim Hng Kiang, who announced that
in the face of “headwinds” the government would
increase funding from 50% to 70% for selected
capability development programmes in design,
intellectual property, branding and mergers and
acquisitions. The government has a target to supportSingapore companies, most of which manufacture
offshore, to achieve at least 1.5% market share of
global furniture production by 2015. He also referred
to the many green initiatives by the Singapore
Furniture Industries Council (SFIC) including the
Green Pavilion and the release of its first electronic
edition of Green Handbook on International Green
Certifications and Standards. He also commended
the Furniture Design Week – ‘SingaPlural’ and
congratulated SFIC on its achievements.
By contrast to Malaysia, the International Furniture Fair
Singapore (IFFS), which was smaller than last year, dis-
played huge amounts of temperate hardwood, in both
solid and veneer as well as regional tropical species,
but less dark staining than seen in Malaysia. The show’s
theme was ‘Be part of the new design revolution at
IFFS’. The Singapore Furniture Industries Counc il (SFIC)
makes huge efforts to promote design-led furniture,
and this year was no exception with its now established
D’Space, Platform and annual Furniture Design Awards,
and a materials workshop onsite at a new ‘Green
Pavilion’. There, materials expert Chris Lefteri hosted a
workshop at which industry consultant Michael Buck-
ley presented the environmental credentials of wood,
and Genevieve Chua, a direc tor of PEFC, presented a
paper on the positive use of certified paper and board.
Off-show design events took place all over the city
under the banner ‘SingaPlural’. In one regional initiative,
13 designers and design studios from Singapore, Indo-
nesia as well as Swedish design studio, FormUsWithLove,
launched their creative works developed during their
workshop in Solo C ity, Indonesia. Titled ‘FutureC raft’,
the workshop aimed to create new approaches to-
wards modern-day design using traditional materials.
This initiative by SFIC and Himpunan Desiner Mebel
Indonesia (HDMI) aimed to encourage designers to
create new approaches towards modern-day design
using trad itional materials such as teak, bamboo, rat-
tan, recycled wood and ceramic, the results of which
were shown at IFFS.
In this show week, design ruled and variety was the
name of the game from over 500 exhibitors from 26
countries, most of which were Asian. Singapore compa-
nies now represent almost 1% of global furniture produc-
tion valued at S$6.7 billion (US$5.4 billion), mainly made
offshore, thus exerting an inversely proportional regional
influence by this tiny island state. Footfall at the show
was brisk and exhibitors reported good results. Many of
them are turning their attention to Asian markets includ-
ing J apan, Korea and China, from where there camesignificant numbers of buyers and exhibitors, making this
a more Asian-focused show than ever before.
(L-R) Amb a r Tjahyon o, AS MINDO, Won g J ia Wei, S FIC,Mark Morriso n, C ypress Creek Hardw oo ds , Austin, Texa s,and J ohn Cha n, AHEC Hong Kong at IFFS
G reen Pa vilion Pa nel a t IFFS: l-r) Chris Lefteri, Micha el Buc kleyGreen Pavilion Panel at IFFS: (l-r) Chris Lefteri, Michael Buckley
and Genevieve Chua a t IFFSand Genevieve Chua a t IFFS
7/17/2019 March April 2013
http://slidepdf.com/reader/full/march-april-2013-568e012b267c0 24/82
IFFINA – IndonesiaIFFINA – Indonesia
2www.panelsfurnitureasia.com MARCH/APRIL 2013
PANELS & FURNITURE ASIA SPECIALREPORT
Twenty companies featured their exhibits under the
national brand Singapore MOZAIC. Overall the IFFS of-
ferings ranged from the new collections from leading
players of the industry in Singapore in Oak and Walnut
by leading manufacturer KODA, to a set of custom-
made White Oak furniture by Jarrod Lim and exhibited
by the American Hardwood Export Council (AHEC).
White Oak and Black Walnut, high-gloss white melamine
faced MDF and some dark-stained loca l species rep-resented the majority trends in wood-based furniture.
Combinations of painted and raw wood were also
popular and recycled wood furniture continues to find
buyers. Given the large number of overseas exhibitors
from C hina, Vietnam, Indonesia and elsewhere, this
truly international fair is also a showcase for the wider
trends and styles in the region.
America n Blac k Wa lnut by Hup Cho ng, Ma laysia
J erry Low's 'J otter Goo ds' for Star Furniture, S inga pore
White Oa k set b y KODA, S ingapo re
The opening ceremony of the International Furniture
Fair Indonesia (IFFINA) included some English language
for the first time and Ambar Tjahyono, President of
ASMINDO, burst into his own personal welcome song
to much applause, which rather set the tone of the
show. In the past it has struggled to present itself as
international — and still no press release in English.
However one innovation was an ASMINDO-funded
show magazine produced in advance with some
informative and useful copy. It was welcomed by far
more overseas visitors than ever before, reflecting an
increasingly greater interest in Indonesia as a furniture
manufacturing country.IFFINA was well interspersed with more contempo-
rary designs than usual, suggesting it has moved on from
being regarded solely as a ‘traditional Teak’ show, as
previously perceived by many. Even the contemporary
Teak furniture has developed further and is leading to
more modern styles with both Teak and other local
plantation species (Mindi, Sungkai and Mahoni in par-
ticular) and imported species — mainly American and
European Oak. This trend may be influenced by the
many overseas investors now operating joint ventures
in Indonesia, who may also be part of the reason for
the increased interest by foreign buyers.
Differing from other shows in SE Asia, IFFINA focused
a great deal on ‘Verified Legal’ products at all levels
with signage, labels, workshops and publications widely
promoting the Sistem Verifikasi Legalitas Kayu (SVLK)
now in place to licence Indonesian exporters of tim-
ber and wood products. The system has not yet been
implemented with a Voluntary Partnership Agreement
(VPA) with the EU, which is still in process. However,
at a workshop during the show, Bayu Krisnamurthi,
ASMINDO PresidentASMINDO PresidentAmb a r Tja hyo noAmb a r Tja hyo nosings a welcome tosings a welcome to
IFFINAIFFINA
7/17/2019 March April 2013
http://slidepdf.com/reader/full/march-april-2013-568e012b267c0 25/82
FrenchTimber G roup exhibited a t IFFINA
24 MARCH/APRIL 2013 www.panelsfurnitureasia.com
SPECIALREPORT PANELS & FURNITURE ASIA
Deputy Minister of Trade, Indonesia, on behalf of SVLK
announced that “we love our forests and so SVLK is our
own legislation and we are grateful for the support of
our overseas friends, especially the UK.” He hoped that
signature of the timber trade agreement with the EU
would come in April and that there would be no delay
as “we need to get an advantage from SVLK while
we a re ahead. There are 27 countries that I have to
convince so I will start with buyers, not politicians,” he
added. Dwi Sudharto of the Ministry of Forestry provided
comprehensive statistics of Indonesia’s trade and fight
against illegal logging, “which is now showing a declin-
ing trend.” SVLK has had a long journey but now has
12,120 V-legal documents issued to 125 destinations as
at 12 March 2013; and he c losed with a plea for further
progress to be made.
Writing in the Of ficial Message bulletin, Minister
of Trade Mr Gita Irawan Wirjawan confirmed that
Indonesian furniture exports had suffered in 2011
and were down from a peak of US$2.25 billion in
2008. But exports had improved by 4.26% in the first
11 months of 2012 to US$1.62 billion for the period.
He commended ASMINDO – the furniture association
– for its work.America n ha rdwoo d winners of IFDC 2012 a t IFFINA
Bothw ell contrac t
furniture forMaldives hotel
project
Indonesian furnitureretaining an Asianflavour
Tea k still be ing fea tured
strongly at IFFINA
I F F I N A
– I n d o n e s i a
Notable at the show was a huge improvement of the
display of prototypes in what might be called the
‘designer alleys’ at the registration areas. Even moreimpressive were the extensive offerings of furniture
‘with imagination’ and contemporary appeal within
the exhibition halls. Talking with designers and judges
from the most recent annual Indonesian Furniture
Design Competition (IFDC), there is a growing under-
standing that Indonesia could benefit from retaining
an element of Indonesian style while offering contem-
porary furniture made to high woodcraft standards.
Two long-term initiatives by AHEC are the IFDC
and a design camp in Java. This year the winners of
IFDC III and some designer prototypes from the recent
design camp ‘Hands of Jepara’ formed an important
part of AHEC’s IFFINA presentation showing US hard-
wood material. It also exhibited at the tiny inauguralIndonesian Woodshow that reportedly left its small
band of exhibitors less than satisfied.
Design-led development will undoubtedly offer
opportunities for imported hardwoods, especially as
the industry becomes more aware of legislation to
eliminate the use of illegal wood. With that in mind
there were more wood suppliers exhibiting in Jakarta
than at any other furniture show in Southeast Asia this
year, including AHEC, FrenchTimber, exporters such
as Baillie Lumber, Sonoking Corporation, and Missouri
Walnut; and specialist import stockist APP Timber.
7/17/2019 March April 2013
http://slidepdf.com/reader/full/march-april-2013-568e012b267c0 26/82
I-BOND® resins are the natural choice when trying to satisfyemission standards like CARB II and the Japanese F**** standard.
I-BOND® methyl diphenyl diisocyanate (MDI) resins fromHUNTSMAN are a family of powerful and fast curing, no addedformaldehyde resins for the composite wood industry. Theyare used for bonding oriented strand board, medium densityfiberboard, particleboard and wood fiber insulation boards.
To find out more about the many benefits of the I-BOND® range of resins, please contact us: Huntsman, No 452 Wen jingRoad, Minhang Development Zone, Shanghai China 200245.Email: [email protected] Telephone: +86 21 2403 7288.
No added formaldehyde.
The natural choice.
I-BOND® is a registered trademark of Huntsman Corporation or an affiliate thereof in one or more, but not all, countries.
Come and mee t
t he I - BO N D ® team a t LIGNA 20
13,
6 - 1 0 Ma y
Ha l l 2 7, S tand G05
Hanno ver, German y
7/17/2019 March April 2013
http://slidepdf.com/reader/full/march-april-2013-568e012b267c0 27/82
TIFF – ThailandTIFF – Thailand
26 MARCH/APRIL 2013 www.panelsfurnitureasia.com
SPECIALREPORT PANELS & FURNITURE ASIA
In Thailand, the Thai International Furniture Fair (TIFF)
is generally smaller than other ASEAN shows, design
led and focused heavily on J apan and Europe, two
of its main markets. The fair is strongly supported by
the Ministry of International Trade Promotion. Its theme
“SOOK” or, in other words, “Small Order OK” adopted
last year was coupled with this year’s theme “Inspire
inside out” to convey the message of Thai furniture
makers’ capabilities to inspire and respond in design,
raw material selection and production. TIFF featured
over 167 top furniture makers from Thailand and
overseas at IMPACT Muang Thong Thani.
At the opening ceremony, Mr. Nattawut Saikuar,
Deputy Minister of Commerce, stated that, “After
cop ing with a series of natural disasters and the
Eurozone economic downturn in the previous year, in2013, the exports of furniture and furniture parts from
Thailand are expected to have a bright future with an
expected total export value of 1,125 Million USD.” He
said that “Undoubtedly, TIFF 2013 will play a key role in
helping us achieve that goal. It’s a great platform to
demonstrate to the world the outstanding design and
quality of Thai furniture, as well as to boost furniture
export growth and promote Thailand as the production
and export hub of quality furniture items in the region.”
As in previous yea rs, the US Foreign Agriculture
Service, in cooperation with AHEC and the Thai Furniture
Industries Assoc iation (TFA), funded a furniture design
camp providing a valuable display of 20 pieces of
America n hardwood furniture, on which A HEC is
able to develop substantial publicity. This was greatly
enhanced at the show by the participation of H.E.
At TIFF: (L-R) J ira wa t Ta ngkung a mw ong (TFA) with J ohn Cha n(AHEC) a nd Ms Kristie Kenny, US Amb a ss a do r to Tha ila nd
Tea k ova l ta bleby Toiucha ble
Hard Ma ple diningfor J apa n by
Mikimoku
Oak, Walnut
and G rey byPodiumDees aw a t Industries a t TIFF
7/17/2019 March April 2013
http://slidepdf.com/reader/full/march-april-2013-568e012b267c0 28/82
2www.panelsfurnitureasia.com MARCH/APRIL 2013
PANELS & FURNITURE ASIA SPECIALREPORT
VIFA – VietnamVIFA – Vietnam
Ms Kristie Kenny, US Ambassador to Thailand, who
attended the of ficial opening, later toured the AHEC
exhibit and engaged with the designers and a huge
press corps present. American hardwoods are popular
and in 2012 Thai imports of US hardwood lumber rose
well over 60% in volume and value to become the
sec ond Southea st Asian market for the USA after
Vietnam.
Other highlights of TIFF 2013 included ‘T-Style Project’
exhibition by world-renowned J apanese designer
Toshiyuki Kita, who featured various furniture items
specially designed for the J apanese market; ‘DEmark
2012’ exhibition which showcased award-winning eco-
friendly furniture items from the 2012 design c ontest
under the theme of ‘Unlimited Power of Design’; and a
‘Waste to Wealth’ exhibition aimed to educate visitors
on how seemingly waste items can be turned into
practical, unique furniture items.
Ba ngkok Design C amp participants
Traditionally a small show, the Vietnam International
Furniture & Home Accessories Fair (VIFA) was busier
than in previous years with more optimism amongst the
buyers. However, because the large Taiwanese-owned
factories and other large producers do not exhibit at
VIFA, the fair cannot be regarded as representative of
the Vietnam industry. From those present, large amounts
of rubberwood were on offer despite being disguised
by heavy staining. Other species being exhibited were
Acacia, recycled Vietnamese Pine, Yellow Poplar (Tu-lipwood) and American Oak, as well as plywood which
has become more popular as a featured material for
furniture – seen at several shows.
The industry is centred on Ho Chi Minh City for interior,
mainly dining/ living; and in Central Vietnam for outdoor
furniture and more recently in Hanoi to service the capi-
tal’s development. In HCMC , the industry assoc iation
HAWA plays a leading role including the organisation
of VIFA. It is interesting to note, given that Vietnam is
largely an OEM industry, that HAWA’s activity in design
competitions has not been evident this year.
Vietna m st illusing a lot ofRubberwood
7/17/2019 March April 2013
http://slidepdf.com/reader/full/march-april-2013-568e012b267c0 29/82
28 MARCH/APRIL 2013 www.panelsfurnitureasia.com
SPECIALREPORT PANELS & FURNITURE ASIA
Vietnam has enjoyed a continuous growth of
furniture exports, valued at US$3.9 billion in 2011, up
from US$435 million ten years ago, according to the
National Statistics Of fice. Europe, USA and Asia are
its key markets. This makes Vietnam #1 in SoutheastAsia, #2 in Asia and #6 or #7 furniture producer in the
world. The industry is heavily controlled by foreign
investors in joint ventures and very dependent on
raw material imports. In recent years, Vietnam has
also experienced a fast growing domestic market.
SPECIALREPORT
Southeast Asia TrendsSoutheast Asia Trends
America n WhiteOak by Boa
Hung a t VIFAin Sa igon
There were many conflicting trends evident in the South-
east Asian offering of wooden furniture in March 2013,
as evidenced by these shows. Dark stained furniture
rules and there was not so much showing of natural
wood colours, limited mainly to Oak and mainly in
Singapore and Thailand. The main colour exceptions
were white and grey, popular in the bedroom, living
and patio sectors.
In terms of species, local tropica l wood remains the
main material, with imported wood a small but increas-
ing player. Plantation and natural forest species from
Ma laysia and Indonesia are dominant. This year saw an
expanded display of Palm-wood furniture in Malaysia
and an impressive and comprehensive exhibition of
plantation Acac ia at EFE – showing the raw material,
laminated panels and finished furniture.
There was a noticeable increase in the use of cer-
tified European Oak and Beech, explained in some
cases by a desire to comply with the new EU Timber
Regulations, which is seen as providing safe options.
Oak was less in evidence this year at the shows overall
but American Oak was still very strong in Singapore
and Thailand. There were far less variations of finishing
in Oak – mainly natural waxed or bleached and very
little stained. Some manufacturers are using Ash from
China (grown in Russia?) as well as Ash from Europe and
USA. Flat-surfaced bamboo furniture was noticeable
generally by its absence.
However there are also a number of common
threads. In Malaysia where Rubberwood still rules and
despite predictions by some buyers that it has had its
day, there are very many manufacturers still wedded
to the material. In Malaysia there was a noticeable
absence of American Oak, at least by those producers
exhibiting at the three venues, but at the other shows
Oak and Walnut were the key temperate species. Teakwas well to the fore in Indonesia but no longer totally
dominant. Shows were smaller in some cases, but gen-
erally a little more optimistic than in 2012.
No report of furniture export industries would be
complete in 2013 without mention of the new EUTR and
Australian Illegal Logging law on imported (and domes-
tically grown) wood products. However this was not a
subjec t individua lly publicised by exporters, except at
IFFINA in Indonesia, although surely discussed privately.
Nor was there much public evidence for visitors of certi-
fied wood under FSC or PEFC labels.
P a lm furniture from
Malaysia
Grey wa s a ll aroundin SE Asia 2013
EuropeanEuropeanBeech by BowBeech by Bow
in Malaysiain Malaysia
7/17/2019 March April 2013
http://slidepdf.com/reader/full/march-april-2013-568e012b267c0 30/82
7/17/2019 March April 2013
http://slidepdf.com/reader/full/march-april-2013-568e012b267c0 31/82
30 MARCH/APRIL 2013 www.panelsfurnitureasia.com
PANELMANUFACTURING PANELS & FURNITURE ASIA
MDI has long been the resin of choice for MDF produc-
tion, however, some manufacturers still labour under
misconceptions of the versatile, formaldehyde-free
adhesive. Berliana Harnadewi, Huntsman Marketing
Manager for Asia, explains some of the benefits of MDI
and what manufacturers should be looking for from
their resins partner.
Quality assurance“As with any chemica l manufacturing process, it is im-
portant to ensure the right adhesive is chosen for the
job at hand,” comments Berliana. “In MDF production,
the number of variables to consider is increased by the
need to take into account the species of wood used
and how it will dictate the chemical composition of
the required resin. A reputable supplier will work with
manufacturers to ensure the adhesive mix is optimised
for use.”
Once the chemical ratio is confirmed, it’s time to
look at how the new resin can be incorporated intothe existing operation. Huntsman has a technical sup-
port team on hand that can offer a realistic trial within
the manufacturer’s own production plants. This helps
customers understand the benefits of switching resins,
including any assoc iated productivity increases.
A further benefit of in-house trials is the opportunity
to put the finished product through quality assurance
testing. This is often the point at which the superior prod-
uct performance of panels bonded with MDI comes to
the fore, such as improved moisture resistance and an
excellent strength to weight ratio.
eMDI for
MDF: areyou missingout?Pa ne ls & Furniture Asia speaks to leading
resin manufacturer Huntsman on the uses ofEmulsifiable Methylene Diphenyl Di-isocyanate(eMDI) in MDF manufacturing and their latesttechnological advances.
Ms Berliana Harnadew i from Huntsma nMs. Be rliana Harnadew i from Huntsman
Medium-density fibreboard
7/17/2019 March April 2013
http://slidepdf.com/reader/full/march-april-2013-568e012b267c0 32/82
3www.panelsfurnitureasia.com MARCH/APRIL 2013
PANELS & FURNITURE ASIA PANELMANUFACTURING
Chemical versus physical bondMuch of MDI’s superior performance can be traced to
the bonding process itself. The chemical weld which
is created when the resin is put under intense heat
results in a supreme bond with the wood particles or
strands. This allows penetration depths of up to 1 mm,
well beyond the 3 cell depths commonly assumed to
be needed for wood resins to provide adequate ad-
hesive strengths. Chemica l welding is a key feature of
Huntsman’s I-BOND®resins.
The mechanical weld provided by formaldehyde-
based products makes it clear to see where one mate-
rial starts and another ends. In contrast, in the diffusion
interface of MDI the resin effectively becomes one
with the wood and this, along with the penetration and
spread, is responsible for the high quality performanc e
of MDI bonded wood, including resistance to thickness
swell and the high strength of the finished product.
Cutting costsCosts remain a predominant consideration throughout
the composite wood industry. Fortunately, switching
to MDI need not be cost prohibitive. In fact, thanks to
lower dosage requirements, MDI could be a cheaper
alternative to other resins on a cost per m3basis. To bet-
ter communicate this with potential customers, Hunts-
man has created detailed cost models, which can be
tailored for producers’ specific needs.
Safety first
As with any chemical there are certain environment,health and safety practices that wood panel manu-
fac turers need to adhere to when using MDI. Because
of this, Huntsman offers ‘Walk the Talk’ training for new
customers at the start of any contract, providing them
with a dedicated team of industrial hygiene specialists
to help ensure complete compliance with all necessary
procedures and regulations.
Technological development and the future of MDF“Huntsman has been working in partnership with MDF
producers for more than 30 years,” says Berliana. “The
key to this relationship has been Huntsman’s commit-
ment to providing tangible benefits to the production
process compared to melamine urea formaldehyde
(MUF) resins.”
One produc t that has been developed as a result of
this collaboration is the I-BOND® MDF EM 4330. Designed
specifically for MDF applications, I-BOND® MDF EM 4330
ensures that issues of blow line blockages are avoided.
The resin offers the important advantage that it forms a
stable emulsion with water, which in turn provides bet-
ter distribution on the wood fibers in the blow line, the
result being a significant increase in panel production
and overall performance.
The latest developments include I-BOND® MDF EMFC
4332, which delivers a line speed increase of 10 to 15%
compared to current eMDI resins, further closing the
gap between eMDI and traditional MUF resins.
Since its launch, the I-BOND® MDF EMFC 4332 resin
continues to be well received by many of Huntsman’s
current MDF customers as well as capturing the interest
of new contacts. This latest development exemplifies
the opportunities MDI has to offer and in a very timely
manner, considering the wider legislations impac ting
manufacturers worldwide. I-BOND® MDF EMFC 4332 is
another step forward in terms of c ost effec tive use of
MDI in MDF production, it aids compliance with new
legislations that a re direc ting the market towards a ‘no
added formaldehyde’ future.
In addition to innovative bonding technologies,
Huntsman has launc hed its new I-RELEASE® brand of
assoc iated release agents, which can be applied either
internally or externally during production. Internal re-lease agents are mixed in-line with the resin and added
direc tly to the blowline, whereas external applications
are applied direc tly to the press belt.
Regulation The ever increasing legislation concerned with formal-
dehyde emission levels is a key driver for the increased
popularity of MDI. The no added formaldehyde I-BOND®
resins are exempt within the requirements of section
93120.3 of the California Air Resources Board (C ARB)
standards. Using MDI will also help ensure end products
attain CARB I, CARB II and J apanese F**** compliance.
Recent recommendations from The European Risk
Assessment Committee are also likely to lead to more
rather than less restriction on products conta ining
formaldehyde when EU legislators look to update the
European EPF-S Standard.
MDI, the resin of choice for MDF manufacturers“MDI continues to gain in popularity throughout the
composite wood panel manufacturing industry,” con-
cludes Berliana. “Its versatility, continuous development,
cost and product performance has seen it become the
resin of choice for MDF producers.
“As one of the world’s largest chemical manu-facturers, Huntsman is committed to innovation. The
company is positive that MDI represents the future of
the composite wood panels industry. MDI’s no added
formaldehyde composition makes it the ideal adhesive
for manufacturers targeting markets throughout Asia,
Europe and the United States in the fac e of increasing
regulation. Huntsman continues to work with partners
throughout the global MDF industry to develop better
resins that can deliver competitive advantage.”
For further information on Huntsman’s products and
services, visit www.ibondwood.com.
7/17/2019 March April 2013
http://slidepdf.com/reader/full/march-april-2013-568e012b267c0 33/82
It is well known that China is now the No. 1 wood-based
panel producer in the world, but the industry is fac ing a
lot of challenges, such as structural problem of supply
and demand; shortage of raw materials; panel variety
and quality, etc . It must be stressed that there is a need
for structural adjustment and upgrade of China’s wood-
based panel industry. Outdated methods of produc-
tion are now being replaced with high-ef ficiency and
environmentally friendly equipment. During the nextfive
to 10 years, the fiberboard industry will be re-adjusted
and optimised.
In order to adapt to the technological changes and
market trends, China FOMA ac tively innovates and
improves on the machine performance of its continu-ous press and multi-opening hot press technologies.
The company has developed various models of its
continuous press for different sizes. There are models
which cover 8 feet and 9 feet with annual production
capacity from 150,000 cbm/ yr to 400,000 cbm/yr. There
are a lso MDF, PB and OSB series to meet the customers’
different requirements.
The 8 feet MDF continuous press production line
is equipped with the 58-inch advanced de-fiberator,
inclined fine sanding and polishing wide-belt sanding
machine, flexible sawing and trimming system. China
FOMA holds proprietary intellec tual property rights for
Mr. Yue Qunfei, China FOMAGroup Deputy GM, during amedia interview held recently,shared their company’sexperience and role in thedevelopment of China’swood-based panel industry.
the continuous press infeed section, board thickness
and shape automatic coordinate adjustment, on-line-
speed-supervision for steel belt and roller rod carpet,
self-adaption structure for heat expansion, etc. China
FOMA has obtained dozens of invention patents, includ-
ing some European patents.
Moreover, China FOMA has made every effort to im-
prove the qua lity of the key machine quality and whole
line, ensure smooth connection, and reach maximum
ef ficiency. Focus is on the technical process data of
large production capacities, wide size and high-quality
production lines. China FOMA’s de-fiberator, forming
machine, pre-press, sanding machine, etc., meet the
high-quality manufacturing standards and clients’technical requirements.
According to Mr. Yue Qunfei, training employees
is also very important. He trains his team of mechani-
cal, hydraulic and electrica l engineers, as well as the
customers’ operations personnel. China FOMA also
developed an expert-remote-assistance system based
on the information platform to ensure standardised
solutions for the customer.
China FOMA’s slogan “Independent Innovation,
Pursuit of Excellence” will hopefully change the history of
China’s wood-based panel industry, and bring win-win
results to both customer and the company.
32 MARCH/APRIL 2013 www.panelsfurnitureasia.com
PANELMANUFACTURING PANELS & FURNITURE ASIA
utdated
Outdated
methods
methodsare
areUT
OUT
Mr. Yue Qunfe i, China FOMA Group De puty G M
7/17/2019 March April 2013
http://slidepdf.com/reader/full/march-april-2013-568e012b267c0 34/82
7/17/2019 March April 2013
http://slidepdf.com/reader/full/march-april-2013-568e012b267c0 35/82
34 MARCH/APRIL 2013 www.panelsfurnitureasia.com
PANELMANUFACTURING PANELS & FURNITURE ASIA
Italian company ZAFFARONI has introduced their Dou-
ble Spindle Multi-rip Saw for panels model “MSR 130
ds”, a mac hine borne from the need to make incisions,
multiple longitudinal grooves or cuts simultaneously on
both surfaces of the panel processed.
The MSRfind its applications in the world of furniture,
building and construction materials in general where
the wood-based panels can be used raw or coated
such as MDF, HDF, plywood, partic le board, then ce-
ment fibreboards, plastic laminates, and extruded
plastic materials such as PVC, PP and XPS, polyurethane
foams and extruded panels, composite panels such as
gypsum board or mineral fibres with surfac es already
finished or coated with different decorative materials.
Made in different variations and processing ca-
pacities from 80, 130 up to 160cm, the MSR can be
Greater
productivitywith the“MSR 130ds”
equipped with special equipment ac cording to differ-
ent production requirements that will determine the
different versions.
Equipped with throughfeed advancement for the
workpieces, the MSR is a high-performance machine
that can be easily integrated into a production line
or interlocked with automatic loading and unloading
devices for panels.
This model is equipped with a spec ial group of feed-
ing rollers, in the specific compound from the lower andfree rectified rollers to the driving upper and rubber
coa ted rollers. All rollers fitted to this machine were
generously sized, considering all the involved mechani-
cal tensions during the use.
As demonstrated by the generous mass of which
is equipped (4,600 kg), the “MSR 130 ds” is definitely a
robust machine, built with ca re, and is an equipment
that retains many of the hit series “MLS” as well the sys-
tem for the regulation of the cutting depth that does
not change the working height or the interchangeable
working table, which assures the perfect execution of
the cut without vibrations.
View of t he to ols-holder s hafts
View of the tools se t-up desk
7/17/2019 March April 2013
http://slidepdf.com/reader/full/march-april-2013-568e012b267c0 36/82
7/17/2019 March April 2013
http://slidepdf.com/reader/full/march-april-2013-568e012b267c0 37/82
36 MARCH/APRIL 2013 www.panelsfurnitureasia.com
MARKETREPORT PANELS & FURNITURE ASIA
Production in Europe dec rea sed by 1.4% to 12.6
million m3 in 2011, with rising production in Croatia andGermany offset by declines in Romania and Slovakia.
Sawn hardwood production in the 12 Commonwealth
of Independent States (CIS) increased by 6.8% to 3.5
million m3 in 2011 boosted by rising levels of exports
of Russian sawn oak into C hina. After dipping to 16.4
million m3 in 2010, sawn hardwood production in North
America increased by 4.4% to 17.2 million m3 in 2011
as domestic consumption stabilised and there was a
revival in export demand, particularly in China and
Vietnam.
After a promising start to 2011, sawn hardwood
consumption across the UNECE region fell away in
the second half of the year as austerity measures and
the euro-crises undermined economic confidence in
Europe and the recovery in the US housing sector was
slow to gain traction. Sawn hardwood consumption
across the UNECE region was 31.1 million m3 in 2011,
only a 2% increase c ompared to 2010. Sawn hardwood
production across the region was 33.3 million m3 in 2011,
an increase of 2.4% over 2010. After several years of
turmoil, supply and demand for sawn hardwood in the
UNECE region are now finely balanced at levels which
are low compared to before the economic crises of
2008-2009 and prices are more stable. Overall European
consumption of sawn hardwood in 2011 was 13 millionm3, a 0.6% decline compared to 2010 and well down
on the level prevailing prior to the European recession.
Oak in flooringOak continued to consolidate its dominant market
position in the European flooring and joinery sec tors
during 2011, whereas tropical hardwoods continued to
lose share, due to limited availab ility and development
of innovative new products for external applications.
Globalisation in the furniture sec tor combined with
weakness in the construction and housing sec tors has
UN/ECE review of the
European and North Americanhardwood and panel marketsLate last year the United Nations Economic Commission for Europe (UN/ECE) issued its 2012
review of the European and North American hardwood and panel markets.
led to a decline in demand for appearance grade
sawn hardwood within the UNECE region and increasingexports of these grades to other markets, particularly
China. However, there are early signs of a trend towards
“re-shoring” (industry returning on-shore) of furniture
and cabinet manufacturing within the UNECE region
which might revive demand for appearance grade
sawn hardwood in the future.
The US Lac ey Ac t Amendment and the European
Union Timber Regulation are placing new obligations
on suppliers to demonstrate “low risk” status with
respect to illegal logging and should benefit hardwood
supplies in regions where there is strong evidence
American White Oak double doors consumption
P hoto c redit: Turnstone S ingapo re
7/17/2019 March April 2013
http://slidepdf.com/reader/full/march-april-2013-568e012b267c0 38/82
3www.panelsfurnitureasia.com MARCH/APRIL 2013
PANELS & FURNITURE ASIA MARKETREPORT
of good forest governance.
Influence of ChinaOverall, the hardwood market in 2011 was reported
as one of mixed fortunes, weakening towards the
end of the year. However, going forward, the report
makes interesting reading on the influence of China in
the global hardwood market. It suggests that “.....it is
important to highlight that the long-term
future of global sawn hardwood markets
is becoming more dependent on events
outside the region. C hina’s role in the
international hardwood trade is particularly
critical.”
China’s imports of temperate hardwood
logs reportedly fell from a peak of 5.6 million
m3 in 2007 to under 1.7 million m3 in 2009. The
reason given was the large downturn dueto a substantial decrease in imports from
Russia following the Russian government’s
introd uc tion o f high log expo rt taxes
designed to boost the domestic processing
industry. The decline apparently affected
China’s imports of Birch logs for production
of plywood, and of Oak logs for lumber
and veneer.
Russian exports of Oak logs to China
red uc ed from 827,000 m3 in 2008 to
only 90,000 m3 in 2011 – a massive drop.
China’s imports of higher value logs for
manufacture of appearance-grade
veneer and lumber from Europe and North
America had fa llen slightly in the 2008-2009
period during the economic downturn.
However, imports of these higher value
logs from Europe and North America
rebounded dramatically after 2009 to
reach over 1.5 million m3 in 2011, thereby
offsetting the dec line in imports of Russian
Oak logs. Slowing economic conditions in
China and in export markets for China’s
finished products led to the build-up of
excess stock of Oak logs in China by theend of 2011. As a result, China’s imports
of Oak logs declined early in 2012. But
this reduction has been offset by a rise
in imports of European Beech logs which
are now more in demand in China due to
stable and relatively competitive pricing.
The report continued “there is likely to
be continuing strong demand for North
American and European hardwood logs
in China and Vietnam, but also rising
demand for sawn temperate hardwood
in China, Southeast Asia and Latin America. These
opportunities are all the more welcome given signs
of only slow market recovery in traditional markets of
Europe and North America.”
Panel exportsProduction of American and Canadian wood-based
panels in 2011 was little c hanged from 2010. North
7/17/2019 March April 2013
http://slidepdf.com/reader/full/march-april-2013-568e012b267c0 39/82
Flooring in Norway: Rehearsal facility at the Oslo Opera Houseby a rchitects Snøhetta AS
The C hina effect
P hoto c redit: Turnstone S ingapo re
Note: “Other” includes spec ies with less than 3% market sha re:birch, eucalyptus, acacia and chestnutSource: European Federation of the Parquet Industry, 2011.
Production photo
Pho to credit: Ross i Group
38 MARCH/APRIL 2013 www.panelsfurnitureasia.com
MARKETREPORT PANELS & FURNITURE ASIA
American panel exports fell by 6.4% in 2011: an increase
in US exports of 4% was offset by Canadian exports
which were 7% lower than in 2010.
The California Air Resources Board (CARB) legislation,
designed to reduce formaldehyde emissions in wood-
based panels, moved to Phase II for both particle board
and MDF on 1
st
J anuary 2011 and now forms the basisfor new federal laws in all U.S. States. The Lacey Act had
a mixed impact on U.S. imports of wood-based panels,
with overall imports from tropica l countries down in 2011.
The expansion of the Russian wood-based panel
sector continued in 2011 due to increased demand
in residential construction (up 5.1%) and furniture
European hardwoodflooring species, 2009-2011
manufacturing (up 6.2%). Plywood and fibreboard
production volumes increased by more than 10%
over 2010 levels and particle board production up by
more than 20%. During 2011, total European particle
board production contracted by 1.9% with oriented
strand board OSB down by 5.2%, but MDF production
increased by 3.7%.
The panel sec tor review conc luded tha t the
European wood-based panels industry is slowly
returning to better market cond itions. But although
the construction industry was showing positive signs,
the performance of furniture manufacturing was
disappointing. Notable also was the increase in
European production costs, especially in resins and
energy.
7/17/2019 March April 2013
http://slidepdf.com/reader/full/march-april-2013-568e012b267c0 40/82
3www.panelsfurnitureasia.com MARCH/APRIL 2013
PANELS & FURNITURE ASIA SOLIDWOOD
As one of the main materials of solid wood furniture,
Pacific Coast Alder (also named Western Alder, Red
alder) has many attrac tive properties. It is sustainable
and has an appealing appearance and a high price/
performance radio. Alder furniture, with its soft lustrous
surface, gives the room elegance and warmth.
Beneficial in many formsAlder grows in the Northwestern part of the USA, on
cool and moist slopes mostly along the margins of
watercourses and wetlands. It offers a big advantage
for the forests in which they grow, as pioneer species, by
improving soil fertility for future growth of other plants. By
their nitrogen-fixing root nodules, Alder offers nutrients
to the soil to supply their neighboring plants.
It’s holistically recyclable - the wood is processed as
to furniture, the bark as mulch and recycled sawdust as
smoke generator to make salmon. It also has tradition
medicine usage that not only Native Americans usedAlder bark to treat skin irritations, recent c linical studies
also have verified the compounds of Alder is effective
aga inst tumors.
VersatileAlder is suitable for further processing in the production
of furniture. It is easy to work with nails, screws and glue
and can be easily sanded, stained and coated. As a
main solid wood furniture species, Alder is an excellent
choice for even the most complex machining, gluing
and finishing withfine homogeneous grain structure and
Getting to knowPacific Coast Alder again
By Y.L Chen, Qingdao CX JOY Hardwoods
Alder furniture producedby C hina Beking.
Growth range o f Pa cific Co as t Alder.
7/17/2019 March April 2013
http://slidepdf.com/reader/full/march-april-2013-568e012b267c0 41/82
40 MARCH/APRIL 2013 www.panelsfurnitureasia.com
SOLIDWOOD PANELS & FURNITURE ASIA
the light uniform colour.
There is little colour variation between the heartwood
and sapwood. It’s closed grained with natural
consistency, similar to maple, cherry and birch. When
compared with other species such as Walnut or Oak
which have strong style, A lder is very versatile and
predictable. The warm look can fit sea mlessly into
various spatial concepts.
Whether for modern, c lassic furniture or in
combination with materials such as glass, leather and
metal, Alder can easily blend in any spaces and match
all kinds of species: the beech floor, a wa lnut bed or a
White Oak window frame. Alder can be easily dressed
up to any finishing or left natural to show the honey
tone. The versatility keeps Alder’s popularity to grow
among fine furniture and cabinet markers worldwide.
Complete supply chainAlder is the most abundant Western hardwood and is
a prolific, fast-growing species that can provide saw
timber size tree in 25 to 30 years and now becoming
one of the popular hardwood alternatives as it is
more economically priced when compared to other
species.
Besides the high performance-price ratio, the
lumber supplier Northwest Hardwoods develops various
grades tofit the needs of furniture makers. For example,
Northwest Hardwoods separate the mid-grade into
“Cabinet” and “Custom Shop”, grade after drying and
surfacing, furniture maker can choose depending on
their final application.
Northwest Hardwoods and its reliable partner
— Daiichi (Qingdao C X J OY Hardwoo ds), a top
professional producer of edge-glued panel — make
a strong supplier chain. Daiichi adopt world-leading
advanced optimised cutting system. Daiichi’s service
is appreciated by high-end furniture producers in
Germany, Italy, UK, J apan and United States. It is
partner of the solid wood furniture industry, offering
wide product types which include solid edge-glued
panels, finger-jointed edge-glued panels, fixed-length
cut stocks and multi-layer glued panels in Pac ific C oast
Alde r, America n White Oak and Walnut. Furniture
makers can get the cut-to-size and just-in-time service
and quality assuranc e from Daiichi.
Northwest Hardwood s grad es lumbers.
Alder sa w mill. Da iichi offers high-q ua lity Alder edge-g lued pa nels .
7/17/2019 March April 2013
http://slidepdf.com/reader/full/march-april-2013-568e012b267c0 42/82
Daiichi’s warehouse.
4www.panelsfurnitureasia.com MARCH/APRIL 2013
PANELS & FURNITURE ASIA SOLIDWOOD
Sustainable managementAside from versatility and complete supp ly chain
benefits, Alder is a sustainable resource that meets the
highest standards of ethica l sourcing and sustainability
in forest products. Northwest Hardwoods and Daiichi
have both achieved Programme for the Endorsementof forest C ertifica tion (PEFC ) Cha in-of-Custody
Certification.
Everything you want in a hardwoodAs an environmentally friendly wood, in addition to
benefits and versatility, Alder is also an abundant and
affordable choice. Through the complete supply chain,
solid wood furniture makers can easily get consistent,
reliab le and high-quality Alder lumber and edge-glued
panels. Alder is everything you want in a hardwood,
perfec tly suited to the needs of furniture industry.
Alder is is a p rolific fas t-growing spec ies.Alder is is a prolific, fa st-growing s pec ies.
Alder is also suited forAlder is also suited forkids furniture.kids furniture.
7/17/2019 March April 2013
http://slidepdf.com/reader/full/march-april-2013-568e012b267c0 43/82
Mixed q uality Tea k plantation logs in J ava , Indones ia
42 MARCH/APRIL 2013 www.panelsfurnitureasia.com
SOLIDWOOD PANELS & FURNITURE ASIA
The results of a new FAO globa l ‘Tea k Resources
and Market Assessment’ conducted in 60 tropical
countries show that natural teak forests are declining
worldwide and that the quality of natural grown teak
wood is deteriorating. On the other hand, today’s
survey also reveals that planted teak forests are in-
creasing in area and — when good managementpractices are applied — producing high quality wood.
Natural teak forests in declineNatural teak forests grow in only four countries in the
world: India, Laos, Myanmar and Thailand. In 2010 their
combined area of natural teak forest was estimated at
about 29 million hectares (ha), a lmost half of it growing
in Myanmar. Myanmar is the only country that currently
produces quality teak from natural forests — India, Lao
PDR and Thailand have bans on logging in natural for-
ests or on log exports in place.
Ac cording to the survey, natural teak forests de-clined in area by 385,000 ha globally, or by 1.3%, be-
tween 1992 and 2010. Substantial declines have been
particularly notable in Laos (down by 68,500 ha), India
(down 2.1 million ha), and Myanmar (down 1.1 million
ha). In Thailand, a complete ban on logging in natural
forests introduced in 1989 may have c ontributed to the
recovery of natural teak forests, which are reported to
have increased by 2.9 million ha, according to FAO ’s
report.
Teak trends Teak (Tectona grandis) is one of the most popularand suitable hardwood spec ies forflooring and joinery, especially in Asia. Last year the Food &Agriculture Organisation (FAO) based in Romeissued an update on Teak resources, revealingtrends in both Teak forests and markets:
“Although there is no better up-to-date information
on teak resources available at the moment, data pro-
vided by the survey must be handled with care,” said
Walter Kollert, FAO Forestry Of ficer. “It is dif ficult to obtain
precise figures on teak forest loss, because teak trees
do not grow in pure stands in nature. Natural teak for-
ests are mixed deciduous or tropical evergreen forests
which have a share of teak of between 4% and 35%.”
Planted teak - a globally emerging forest resource Teak is one of the most important and valuable hard-
woods in the world, and planted teak forests have at-
trac ted large private sector investments in Africa, Asia
and Latin America. As a result, the planted teak area
has increased in Africa (Benin, Ghana, Nigeria, Tanza-
nia), Central America (Costa Rica, El Salvador, Guate-
mala, Nicaragua, Panama), South America (Ecuador,
Brazil) and Asia (India, Indonesia, Myanmar, Laos).
“Although the time until trees reach harvestable
dimensions is comparatively long and on average
takes between 20 and 80 years, teak planting serves
local communities as a savings account and in the
long run helps smallholders improve their livelihoods
and the livelihoods of their children,” added Kollert.
Genetic resources conservation is neededIn the future, it can be expected that sustained produc-
tion of teak logs from natural forests will be further limited
due to continuing deforestation and competition for
environmental services, according to Kollert. “Supply
trend points to a continuing dec line in the volume and
quality of natural teak, which results in progressive loss
of genetic resources. This is why it is essential in the near
future to plan, organise and implement a programme
for the genetic conservation of native teak resources in
the four countries with natural teak forests,” he stressed.Young Tea k planta tion in Indo nes ia
7/17/2019 March April 2013
http://slidepdf.com/reader/full/march-april-2013-568e012b267c0 44/82
Indone sia n Tea k (J at i) logs
4www.panelsfurnitureasia.com MARCH/APRIL 2013
PANELS & FURNITURE ASIA SOLIDWOOD
Global teak market trendsAsia holds more than 90% of the world‘s teak resources,
and India alone manages 38% of the world's planted
teak forests. The major teak trade flows worldwide are
direc ted towards India, while its own considerable teak
production is processed within the country. Eleven out
of 14 reporting countries named India as their number
one importer, absorbing 70 to 100% of global teak ex-
ports, including shipments of p lantation logs and sawntimber from Africa and Latin America. Myanmar, India
and Indonesia are expected to maintain their market
position on premium quality teak though this market is
limited by supply.
Tea k clones in J ava , Indonesia
7/17/2019 March April 2013
http://slidepdf.com/reader/full/march-april-2013-568e012b267c0 45/82
44 MARCH/APRIL 2013 www.panelsfurnitureasia.com
SOLIDWOOD PANELS & FURNITURE ASIA
Commenting on the results J ohn C han, AHEC’s Direc tor
in Hong Kong, said “Exports of American hardwood to
Greater China and SE Asia in 2012 have reached an a ll-
time high record while the world is still fac ing economic
downturn and uncertainty. The growth in exports of US
hardwood is driven by regional economic growth and
the domestic consumption markets.”
The Southeast Asia market for US hardwood has
outperformed other developed markets in 2012 with
24.4% increase in total value of a ll American hardwood
products — lumber, logs, veneer, plywood, flooring, di-
mensions and moulding. US hardwood lumber exports
reached US$195.38 million, growing in value by 32%
compared to 2011. Thus sawn lumber is growing more
rapidly than the other products. Logs accounted forUS$59.76 million, up 9%. Veneer accounted for US$16.11
million, up 9%. The veneer industry in China and SE Asia
has been growing rapidly in the pastfive years in parallel
to the fast growing veneer slicing and fancy plywood
industry to support the demand of furniture industries
in the region.
Leading the ASEAN imports of American hardwood
lumber in 2012 was Vietnam where shipments of sawn
lumber amounted to US$130.93 million, an increase
of 32%. Volume to Vietnam totalled 323,880 m3, an
increase of 25% making it the largest importer of Ameri-
American hardwood
American hardwood
lumber shipments to
lumber shipments toSoutheast Asia up 32
Southeast Asia up 32%in 2012
in 2012Data just released by the USA show that
American hardwood lumber shipments toSoutheast Asia were up by 32% in value and 29%in volume for the year 2012 compared to 2011.Log shipments were up 9% and 15% respectivelyand veneer increased 9% and 13%. Americanhardwood flooring was up 143% in value and124% in volume, albeit from a lower base.
can hardwood in the ASEAN, since 2005. This can be
attributed to expansion of the furniture and flooring and
door industries and the capture of overseas exports as
well as a growing demand for internal joinery in the
residential and hospitality sectors. Hardwood log ship-
ments from the USA to Vietnam were up 12% by volume
and amounted to US$40.3 million, increasing by 8% from
2011, a further indication of the veneer production
industry which is gradually developing.
Thailand jumped to become the second largest
market in SE Asia for American hardwood lumber with
exports reaching US$21.22 million an increase of 65%,
and volume totalling 45,750 m3 up 62%. The furniture
manufacturing industry has recovered from the dam-
age of the massive flooding in 2011 which seriouslyimpacted the production and affected the export of
US hardwood to Thailand. However Indonesia is still the
second largest ASEAN market overall for US hardwood
products - valued US$ 34.80 million. Sawn lumber was
valued US$20.53 million up 14% from 2011, and the
volume registered 40,771 m3, an increase of 23% from
2011. Veneer imports increased by 27% reaching US$7.2
million. With log imports from USA of only US$6.04 million
dropping by 26%, it seems that many producers in Indo-
nesia are turning to lumber and veneer as raw material
rather than logs. The property market there is booming
America n Oaks d ominate hardwoo d forests in USA
7/17/2019 March April 2013
http://slidepdf.com/reader/full/march-april-2013-568e012b267c0 46/82
4www.panelsfurnitureasia.com MARCH/APRIL 2013
PANELS & FURNITURE ASIA SOLIDWOOD
and is driving demand for wood products such as doors.
Ma laysia followed Indonesia and Thailand bec om-
ing the fourth largest market in ASEAN for US lumber
with shipments valued at US$19.4 million, an increase
of 33% from 2011, and volume totalling 38,084 m3 up
50%. Despite being rich in rubberwood resources these
three countries are gradually turning to increase their
supplies of imported timber which partially ac counts
for increased of import of US hardwood lumber, veneer
and logs. The relatively small market of Singapore has
shown growth of 34% in value and 60% in volume. With
the Philipp ines the two markets were US$6.63 million of
US hardwood products in 2012.
The hardwood forests of the USA are dominated by
Red and White Oak with Tulipwood as the next mostcommon species – one which naturally regenerates
with prolific seed production. American White Oak
and Tulipwood are the most popular species in SE Asia
accounting for over 50% of shipments in 2012, whereas
in China Red Oak dominated shipments there. However
a wide range of other species such as Ash, Cherry,
Hickory, Maple, Western Red Alder and Walnut were
are a lso shipped to Asia.
2010 2011 2012 % %
Prod uct UOM Value Qty Value Qty Value Qty Cha nge Cha nge
So utheas t Asia Hardw ood Lumber M3 151,290,758 333,249.0 147,866,930 350,347.0 195,381,191 452,940.0 32 29
So utheas t Asia Hardw ood Logs M3 62,639,244 144,648.0 54,973,931 135,875.0 59,758,728 155,928.0 9 15
So utheas t Asia Hardw ood Veneers M2 12,275,616 9,637,723.0 14,838,183 10,941,275.0 16,113,273 12,322,816.0 9 13
So utheas t Asia Hardw ood Flooring M2 1,049,373 31,075.0 675,925 20,558.0 1,640,311 46,119.0 143 124
Source: United States Department of Agriculture 2013
Hardwood Product Exports Value & Volume 2010 to 2012
America n Tulipw ood: S a w n lumber a key s pec ies in AS EAN America n Wa lnut: P opula r in Asia
America n oa k tables ma de in Malaysia a wa iting s hipment to EU
7/17/2019 March April 2013
http://slidepdf.com/reader/full/march-april-2013-568e012b267c0 47/82
46 MARCH/APRIL 2013 www.panelsfurnitureasia.com
SOLIDWOOD PANELS & FURNITURE ASIA
The French timber industry is a leading player in European
timber production, thanks to the rich diversity of both
hardwood and softwood species in France. With a current
wood volume of 2 billion m³ and 128 different species, the
Frenc h forest increases by approximately 88 million m3
every year. Half of this volume is yearly harvested by the
first transformation industry.
Hardwood species account for two-thirds of the har-
vested forest area. They account for more than 60% of the
available volume, making France the leading producer of
high-quality oak and beech in Europe. Timber resources
are exceptionally abundant. Out of 126 different species,
30 are used for sawn timber. This unique biodiversity in Eu-
rope finds its origin in the variety of soils and climates. It also
explains the country’s farming and wineg-rowing tradition.
Hardwood species are mainly located in the plain area
of Northern, Eastern and Central France, as well as in the
main part of the South West. France is the leading producer
of top-of-range oak and beech lumbers.
Here a re some figures about the Frenc h forest:
- Third surface in Europe after Sweden and Finland
- 13% of the European wooded surface
- 15.3 million hec tares
- Oak trees represent 41% of the hardwood forests
High demand for
French woodin MENA
(6 million of hec tares)
- Wooden surface has grown of 20% for the last 20 years
By Etienne Ducrot
Sq uare edged lumbe r read y for shipmentSquare edged lumber, ready for shipment
Green dots : hardwoods localisationRe d dots : Softwoods localisationBlue dots : P oplar loca lisa tion
7/17/2019 March April 2013
http://slidepdf.com/reader/full/march-april-2013-568e012b267c0 48/82
4www.panelsfurnitureasia.com MARCH/APRIL 2013
PANELS & FURNITURE ASIA SOLIDWOOD
Middle East and North Africa
As the demand for wood in the Middle East and North
Africa areas is rising, thanks to the demographic growth
and the healthy real estate industry (combined with higher
standards of living), the Frenc h timber industry has a role
to play and should respond to the needs of the buyers in
terms of quantity and quality. In Dubai, for example, no
less than 30,000 apartments are constructed every year. In
2014, over 1 million accommodation fac ilities is projected
to be constructed in Dubai. This represents a huge potential
for the Frenc h timber industry.
The Middle East market (as well as the North African
market) is mainly looking for two spec ies:
First is softwoods (second and third choice Spruce-
Pine-Fir) mostly used for construction purposes. France
sells more formwork wood and less structure wood. This is
linked to the fact that in North Africa, the housing market
Sa wn lumber, ready to
be kiln dried
Outdoor decking mad e of douglas firOutdoor decking mad e of douglas fir
Oa k boules a vailab le in different thickness es is the b est c hoice for high-q uality furniture ma nufacturingOa k boules, a vailab le in different thickness es is the bes t cho ice for high-q uality furniture ma nufacturing
7/17/2019 March April 2013
http://slidepdf.com/reader/full/march-april-2013-568e012b267c0 49/82
48 MARCH/APRIL 2013 www.panelsfurnitureasia.com
SOLIDWOOD PANELS & FURNITURE ASIA
is increasing (the younger generation are looking for their
own accommodation).
France exports 23% of its softwood sawn timber to
the North African market (Morocco, Tunisia and Algeria).
Hence, French companies are continually improving their
partnerships in that region. In 2012, French softwood exports
in North Africa increased by 39% compared to the previous
year, which means there is a high potential in this area.
Concerning the Middle East, buyers demand mostlyformwork for constructing hotel facilities, but there is also
a demand for framework wood (first choice this time) for
‘high-standard’ construction purposes.
Amongst the many softwood species, France exports
mostly Douglas Fir. It is very popular and is widely used in
the building industry, particularly frameworks.
Second is sawn beech, as it is the cheapest species
of harwood c urrently on the market. It is also the most ex-
ported species in North Africa (more than 35% of France’s
export volume).
Indeed, steamed beech is very popular as there is high
demand among small furniture manufacturers that use it
to make chairs, sofas and door frames.
There is also an emerging demand in Oak in Dubai. The
booming luxury industry uses lots of Oak for interior design.
France’s sawn Oak exports increased by 1,484% from 2009
to 2012 (and approximately the same in Qatar) even
though the amounts are not very significant yet.
France is the top wood supplier in Algeria and Tunisia,
and second leading wood supplier in Morocco. These
markets import wooden products because they don’t
have enough forests to ensure a suf ficient supply of wood
products. Most of the sawn timber that France exports are
kiln dried. Oak boules
A pine forest, wides pread in the So uth West of France
Building co nstruction in Duba i
7/17/2019 March April 2013
http://slidepdf.com/reader/full/march-april-2013-568e012b267c0 50/824www.panelsfurnitureasia.com MARCH/APRIL 2013
PANELS & FURNITURE ASIA SOLIDWOODPANELS & FURNITURE ASIA
Turkish market
Historically, Turkey is a country that has always favoured
wooden construction for the housing industry due to the
fact that wooden components are more flexible than
conc rete and thus resist more to seismic catastrophes.
The wood industry in Turkey is increasing by 6% every
year, due to a demographic growth combined to increas-
ing urban migration.
The furniture market is also very dynamic in Turkey.
There are around 30,000 manufac turers whose ac tivities
represent 4 billion euros. Their exports represent 1% of the
world’s furniture exports.
Sawn Oak timber exports in Turkey increased by a lmos
50% from 2011 to 2012.
In conc lusion, the Middle East and Turkish markets are
emerging players that deserve attention as their housing
industries are flourishing and their economies are promising
The North African market is also a key market for the Frenchtimber industry mostly due to the geographical factor and
the historical legacy between these two regions.
A wo oden house in Ista nbul
Read y for vac uum trea tment
...... ........
’ .
a v rea
french timber Photo Barillefrench timber Photo Barille
Meet FrenchTimber Representatives from the trade asso
ciation ‘FrenchTimber’ will be taking
part in a number of events this year
Come and meet them at the Duba
Wood Show (9-11 April ), Interzum in
Cologne, Germany (13-16 May) and
FMC in Shanghai (11-14 September)
Come and meet ‘FrenchTimber
and some international representatives of the French wood industry
to fi nd out more about what French
saw millers can do for your business
For more in fo rmat ion , v i s i
www.frenchtimber.com.
A French sa wmill loc a ted in the heart of the forest keeps resourcesA French sawmill, located in the heart of the forest, keeps resources
and production facilities a s c lose as poss ibleand production facilities a s c lose as poss ible
7/17/2019 March April 2013
http://slidepdf.com/reader/full/march-april-2013-568e012b267c0 51/82
Multi species products mustMulti-species products mustdeclare origin of all wooddeclare origin of all wood
50 MARCH/APRIL 2013 www.panelsfurnitureasia.com
ENVIRONMENTAL FOCUS PANELS & FURNITURE ASIA
Indonesia, Malaysia and Vietnam all supply flooring to the EU. In Europe, flooring importers
and customers are finalising their preparations to comply with the new EU Timber Regulation
(EUTR). Meanwhile, these three countries and others in Southeast Asia are doing their part. All
three countries are implementing or negotiating a Voluntary Partnership Agreement with the EU.
At the same time, exporters are looking to supply due diligence information to help their trade
partners in Europe comply with the EU Timber Regulation.
Once agreed and implemented, VPAs include
commitments and action from both parties to halt
trade in illegal timber, notably with a licensing scheme
to verify the legality of timber and timber products
exported to the EU. This timber will then be called FLEGT
licensed timber. The agreements also promote better
enforcement of forest law and promote an inclusive
approach involving c ivil soc iety and the private sector.
prepare for newEuropean Timber Import Rules
Ma laysia ha s led the field in ce rtific ation o f
sustainable forestry for many years with its Malaysian
Timber Certification Scheme. The government has also
been developing a VPA with the EU. Timber industry
sources in Kuala Lumpur say that negotiations have
intensified over the last 12 months and that Malaysia
is confident that it will conclude its VPA soon. As they
negotiate, Malaysia continues to put in place a key
Three Southeast Asian countries
7/17/2019 March April 2013
http://slidepdf.com/reader/full/march-april-2013-568e012b267c0 52/82
Wooden furniture shipped to Europe must now meet EUTRWooden furniture shipped to Europe must now meet EUTR
5www.panelsfurnitureasia.com MARCH/APRIL 2013
PANELS & FURNITURE ASIA ENVIRONMENTALFOCUS
ietnamese ooringVietnamese flooringbeing packed for exportbeing packed for export
part for the agreement, its Timber Lega lity Assurance
System (TLAS) which underpins the VPA.
Opinions as to the readiness of individual companies
to meet the EUTR are mixed. Michael Hermens, MD
of APP Timber, a regional timber trade company
with headquarters in Kuala Lumpur, confirms that all
its shipments are supplied with documentation that
enables receivers to complete their due diligence
obligations, which began 3 March. However, there is
a widespread belief based on anecdotal evidence
that many companies are unready or even unwilling
to take such necessary steps. The VPA between the EU
and Malaysia, once signed and implemented, could
help these companies. FLEGT licensed timber products
from Malaysia will be considered negligible risk under
the EU Timber Regulation.
The EU and Indonesia have negotiated a VPA, whichis expected to be concluded in April 2013 and ratified
later this year. The VPA will mean that FLEGT licensed
timber products from Indonesia will be c onsidered
negligible risk under the EU Timber Regulation, and the
EU buyer has fulfilled its EUTR requirements when buying
this timber.
Indonesia’s licensing system to verify the legality of
its timber, called the Sistem Verifikasi Legalitas Kayu
(SVLK) is up and running. Export shipments verified as
legal under the SVLK scheme are issued with V-Legal
documents. Such licences, while valid in Indonesia, are
not FLEGT licenc es, and EU importers will still need to
undertake due diligenc e until Indonesia’s VPA is ratified
by both parties and fully implemented.
Indonesia and five EU countries have been testing
export and import procedures using shipments of
timber products with V-Lega l Doc uments. The first
tests embarked from Indonesia in October 2012 and
arrived in European ports through December 2012.
Results from the test were reviewed in J anuary 2013
and recommended changes discussed with authorities.
There will be an assessment later in the year of the
“operationality” of SVLK and all other operational
elements under the VPA. A positive assessment would
allow EU to accept FLEGT licenses from Indonesia once
the VPA has been ratified and entered into force.
Representatives from Indonesia’s Ministry of Forestry
and the European Union held a joint press conference
7/17/2019 March April 2013
http://slidepdf.com/reader/full/march-april-2013-568e012b267c0 53/82
ndonesian plantation Teak lumber requires Due Diligence by importers in EU Components in Malaysian doors, such as US Walnutand Maple, must be identified for EUTR
52 MARCH/APRIL 2013 www.panelsfurnitureasia.com
ENVIRONMENTAL FOCUS PANELS & FURNITURE ASIA
on the 22nd of J anuary to emphasise their commitment
to continuing trade in timber and wood products,
worth approximately US$1.2 billion annually, as well
as to fighting illegal timber trade. During the press
conference, Secretary General Hadi Daryanto and the
EU Ambassador to ASEAN, J ulian Wilson, heralded the
involvement of forestry stakeholders in the development
of SVLK, because it encourages buyers to have
confidence in the new scheme. They also underlined
that Indonesia and the EU are in a c ritical phase as they
move toward full implementation of new timber trade
procedures defined in the VPA.
Andy Roby, FLEGT VPA Facilitator resident in J akarta
recently said, “Ind on esia is rem a rkab le fo r whe re it ha s
go t to on d eve lop ing a c om prehensive and c red ib le
t im be r leg a lity sc hem e. . .. The go vernme nt ha s a c lea r
v ision of w here they wa nt the ind ust ry to g o, a nd that is
to restore the rep utat ion o f Ind one sian forest p rod uc ts
in in te rna t ion a l m a rke ts .” Indonesia has “a d o p t e d
new t im be r t ra de leg a lity ru les in a m ove expe c ted to
bo ost b ila tera l t im b er t ra de ” and has given details on
progress. This regulation requires that from 1 J anuary
2013 all export shipments (not only to EU) need to have
a V-legal document.
Vietnam faces added challenges since it is both an
importer of timber from the region and an exporter of
processed products such as flooring. Vietnam began
negotiating a VPA with the EU more recently than
Indonesia and Ma laysia, in 2010. The c ountry has a
number of reasons to embark on the VPA negotiations,
that include maintaining ac cess to the EU market,
enhanc ing its market access to the USA and J apan,
enhancing the national image and trademark for
Vietnam’s timber industry, avoiding a recession for the
industry which provides 300,000 jobs with more than
3,400 enterprises and to strengthen the institutional
reform process in forest sec tor and law enforcement.
During the most rec ent nego tiation session in
Brussels in November 2012, both side s discussed
Vietnam’s timber legality definition, the timber legality
assuranc e system to be developed, tracing legality oftimber imports (Vietnam sources timber from over 30
countries) and the timber products that the VPA will
cover. Vietnam and the EU are planning to conclude
negotiations by September 2013.
Some Vietnamese companies have due diligence
procedures in place, such as those dealing with
large European buyers in order to comply with the
EUTR. But some will have severe problems with their
documentation to export timber products, not only due
to lac k of knowledge, but also due to lack of language
skills. Documentation has to be in an EU language, such
7/17/2019 March April 2013
http://slidepdf.com/reader/full/march-april-2013-568e012b267c0 54/82
5www.panelsfurnitureasia.com MARCH/APRIL 2013
PANELS & FURNITURE ASIA ENVIRONMENTALFOCUS
Further details on EU FLEGT Action Plan ElementsVoluntary Partnership Agreements are bilateral trade agreements between the EU and timberproducing countries. Thirteen countries have negotiated such individual voluntary agreements withthe EU, including Indonesia, Malaysia and Vietnam. The voluntary schemes ensure that only legallyharvested timber is imported into the EU from supply countries agreeing to take part. The internal EU
legal framework for this scheme is a Forest Law Enforcement Governance and Trade (FLEGT) Regulation,adopted in December 2005, and its 2008 Implementing Regulation, allowing for the control of theentry of timber and timber products to the EU from countries entering into bilateral FLEGT VoluntaryPartnership Agreements (VPAs) with the EU. Further details are available at http://ec.europa.eu/environment/forests/flegt.htm
Another key element is the EU Timber Regulation, which prohibits the placing of illegally harvested timberon the EU market and will be applicable from 3 March 2013. The EU Timber Regulation was adopted in October2010, while its Implementing Regulation was adopted in July 2012. In addition, the European Commissionpublished a detailed guidance document for “operators” which can be found at http://ec.europa.eu/environment/forests/pdf/guidance_document.pdf.
Joiner y pr oduct s using Malay sian P ly w ood is cov er ed by E UT R
as English. There are also reports of signs that
some companies are starting to shy away
from furniture by trying to invest elsewhere.
However, the eventual implementation of
the VPA between Vietnam and the EU would
solve the problem for companies exporting
to Europe.
A number of initiatives are ramping up to
help the timber industry meet the EU Timber
Regulation requirements. The European
Timber Trade Federation has developed
a due diligence system in collaboration
with the Danish environmental consulting
firm NEPCon. The a im is to p rovide a
system that works for entire timber
federations or individual companies,
based on a pan-European Due Diligence
approach to compliance that other
organisations, including national timbertrade assoc iations and consultancyfirms,
have developed for their members and
clients. Third-pa rty certification systems,
such as FSC and PEFC, are updating their procedures
to meet the new requirements. The European Timber
Trade Federation has announced it will soon issue a
due d iligence guide, helpful for any company shipping
wood products to the EU.
Compared with other countries that export timber
and wood flooring products and remain at high risk for
illegal logging, Indonesia, Malaysia and Vietnam are
reducing their risk and maintaining a thriving trade withthe EU market. As timber importing countries continue to
tighten their laws to favour legal and sustainable timber
products, companies and governments with foresight
are seeing
the writing on the wall and
responding. 2013 will be an interesting year as the EU
Timber Regulation increases the pressure to provide
well-documented, legally-sourced produc ts for export.
FLEGT licensed timber may not be ready in 2013, but
these regulatory tools are also part of the long term
solution for supporting legal trade in timber.
Note : “This new s b rie f ha s be en prod uc ed w ith thefi na nc ia l assista nc e o f the Europ ea n Union . The view s
expressed here in c a n in no w ay b e ta ken to re fl ec t t he
o f fi c ia l op in ion of the Europ ea n Union” .
7/17/2019 March April 2013
http://slidepdf.com/reader/full/march-april-2013-568e012b267c0 55/82
54 MARCH/APRIL 2013 www.panelsfurnitureasia.com
SURFACES&DESIGN PANELS & FURNITURE ASIA
Textiletrends
drive thefurnituredesign
universe
atHeimtextilConsidered to be one of
the most important of theyear, the Frankfurt eventdelivers a world of ideas
and materials
By Kenn Busch
“If you only have time to do one
thing at Heimtextil, you m ust visit
the Trend Forum.”
First-time visitors to the year’s
premier textile and design event
hear this often. If you’ve made
the early J anuary pilgrimage to
Frankfurt before to see the latest
ideas in textiles, chances are you
make the Trend Forum your first
stop, and for good reason.
Heimtextil is unique because it
is literally the intersec tion of every
dimension of design: commer-
cial and residential, fashion and
furnishings, c olour and texture,
luminance and translucence,
east and west. It’s also the first
major international event each
year, and sets the stage for trends
worldwide.
Ac tually, “stage” is a bit of an
understatement. The Trend Forum
54 MARCH/APRIL 2013 www.panelsfurnitureasia.com
SURFACES&DESIGN
If your office lookslike this, t hen yo uare proba bly in
the “Eccentric”ca tegory .
7/17/2019 March April 2013
http://slidepdf.com/reader/full/march-april-2013-568e012b267c0 56/82
5www.panelsfurnitureasia.com MARCH/APRIL 2013
PANELS & FURNITURE ASIA SURFACES&DESIGN
occupies an entire hall in the massive Messe Frankfurt
facility, where you’ll find the concepts distilled by the
Trend Table fleshed out in fantastical displays, samples,
and experiential environments.
“The Trend Table members are from the trend of-
fices we have in six countries,” says Olaf Schmidt, vice
president of textiles and textile technologies for Messe
Frankfurt – “France, Brazil, Germany, USA, Japan, Neth-
erlands and the U.S. Some members change each year,
some remain. They meet each year in March to discuss
what the trends will be for the next 18 months.
“But there’s never just one trend, one colour di-
rec tion. In the fashion business, people like to have a
starting point for discussing trends, a referenc e point for
creating new collections. What we try to do is to provide
global intelligence for product design and forecasting,
and it has proven to be very influential.
“For this year, the Trend Table dec ided on ‘Being’
[as the umbrella concept], meaning everybody’s differ-
ent, and they want to express themselves in their own
way. Within ‘being’ there a re four different charac ters,with different behaviors, drawn to different colours. So
you have different styles but in the end it’s one trend
direction. And of course there are regional differences.”
The Trend Table’s work is captured in the Heimtextil
Trend Book, which can be ordered or from their website
[heimtextil.messefrankfurt.com]. Visitors can also view
a well-produced video on the 2013 trends.
“To feel at home, we need a space that we feel
emotionally connected to, an environment thatfits like
a glove, like a third skin, as an extension of our persona l-
ity,” begins the Trend Book. Playing with the concept
of “you are how you live,” the Trend Table has profiledfour powerful personality types and explored the interior
design possibilities that might better allow them to be
who they want to be:
The Historian is partial to the finer things of bygone
eras, artisanship, opulence and precious materials.
The Eccentric is a hunter-gatherer, attracted to
ec lectic combinations, kitsch, flamboyance and
whimsy.
The Inventor wants function to be fun, and thrives in
creatively interac tive settings that inspire and entertain.
The Geologist is a nature fanatic, and digs organic
imperfections, rough, unfinished finishes, in the context
of the unknown and the unexpected. The Trend Book, like the Trend Forum, is a total im-
mersion experience, leading from the conceptual all
the way to precise colour palettes for each character.
It’s an ambitious endeavor, and it has served to brand
Heimtextil as one of the most important fairs in the world
for fashion and furnishings.
“If you want to know what’s happening in the textile
business, and in fashion and interior design, you have
to c ome to Frankfurt,” says Schmidt. The world seems
to agree: the 2013 exhibition hosted exhibitors from 62
nations, and visitors from 132.
www.panelsfurnitureasia.com
A giraffe’s spots are
vibrant textile samples,in the Trend Fo rum’s“Ecce ntric” world.
Lush, opulent, layered materials are nding their wa yLush, opulent, layered materials are finding their waybac k into des ign.ba ck into des ign.
7/17/2019 March April 2013
http://slidepdf.com/reader/full/march-april-2013-568e012b267c0 57/82
56 MARCH/APRIL 2013 www.panelsfurnitureasia.com
SURFACES&DESIGN PANELS & FURNITURE ASIA
Based in Finland, trend analyst and journalist Susanna
Björklund tracks design and future trends across Europe
and throughout the world. She is a long-time observer
of Heimtextil, and interprets what she finds at the fairfor her readers, students and clients.
We’ve asked her to help us put the Heimtextil fair
into perspective.
Q: How much do trends really change from year to
year?
A: Trends don´t obviously change by the clock. For
some years there seem not to be many new things
around and then suddenly a shift or a change happens
and it becomes more obvious. For some years now the
manufacturers ( in all fields, not just textiles) have also
been extra cautious, not investing into anything new,
expensive and innovative, and instead tried to be ascommercial and safe as possible. But people also need
change, and now I felt there is a shift toward richness in
surfaces, layering, and c ourage to mix and match. It’s
a definite shift away from Scandinavian-style simplic-
ity. Interesting lace and laser cuts bring a richness, and
wallpaper is coming back after several years.
Q: Does the show really reflect global trends, or is it
more Eurocentric?
A: I am probably biased being European, but the trend
panel has always people from J apan and America as
well, this time also from Brazil, discussing and mixing the
opinions of six nations. That should give a wider, moreglobal reflec tion. I went to listen to Mark Goodman´s
[Global Colour Research, USA] colour trends presenta-
tion and he was showing different colours for Europe
and the States. Colours in the US tend to be more
muted.
Q: Do you see markets immediately embracing the
show’s trend assertions, or are they treated more as
suggestions than fashion dogma?
A: People see what they want to see. I always use this
example with my trend lectures: If someone likes animal
prints, out of hundreds of top designers there are bound
to be at least 10 always using them, so this person c ould
always argue they are in fashion...season after season.
Nothing is a fashion dogma anymore, but surely a
show like this will give you ideas to where the world is
going, as well as ideas for something new that you will
inspire ideas into your own line of business.
You need a degree of vision to spot the trends. Ifind
it strange when magazines say there was a lot of this
and a lot of that. Well, out of a zillion manufacturers of
all levels, if you see loads of something it is not a new
trend any more. It’s always worth looking into what in-
novative, high-class manufacturers are doing even if
the price range is out of reach. I am always looking for
something different.
Q: What do you see as the take-away from Heimtextil
for designers and general, and for commercial design-
ers in particular?
A: I go to many shows and Heimtextil has the best trends
by far, but it takes time and effort to get to the core.
It is worth taking the trend tour and listening to some
seminar talks to get to the thoughts behind the c hosen
trends. If you just walk in the middle of this huge space, it
might be dif ficult to understand what it is about. I know
some manufacturers of b ig companies that never visit
the trend forum, they don´t think they need it. What awaste!
I don t́ know why “trend” seems to be such a scary
and superficial word to some companies. At their best
they can guide a company to do long-lasting, com-
mercial dec isions.
The world is getting very personalised, very fast. With
the soc ial media it is easy and quick for anybody to be
a designer or at least demand something bespoke.
Examples of different hotels, restaurants + all kinds of
new and innovative concepts spread fast. Commercial
companies should take this into account and start to
offer something different from the masses.
‘ othing is fashion dogma anymore’‘Nothing is fashion dogma anymore’
Heimtextil’s Trend Fo rum exhibit, d ivided into four d istinctHeimtextil’s Trend Fo rum exhibit, d ivide d into four distinc t“pe rsonalities, ” oc cupies its own ha ll at the Frankfurt fair grounds .“pe rsona lities, ” oc cupies its own ha ll at the Fra nkfurt fair grounds .
Earthy, oxidised d esigns in textiles t for theEarthy, oxidised des igns in textiles fit for the“Geologist” personality.“G eologist” personality.
7/17/2019 March April 2013
http://slidepdf.com/reader/full/march-april-2013-568e012b267c0 58/82
Furniture
Manufacturing &Supply China 2013
The FMC China exhibition has now been running for 18 years. The show moved to the
Shanghai World Expo Exhibition & C onvention C entre in 2011, and the increased exhibition
area and visitor numbers have made the FMC into one of the most famous furniture
manufacturing industry exhibitions in the world. This year, FMC China 2013 will cover 71,000square metres, and is expec ted to attract 850 domestic and overseas exhibitors.
The China Furniture Association advocated in 2012 that “to develop China from a major
furniture manufacturing country to a great powerful country” can only be accomplished with
talented furniture designers, sophisticated produc tion equipment and raw material support.
FMC China 2013, as the premier furniture manufacturing supply platform, is responding
positively to the China Furniture Assoc iation, and has specially organised “The First Lea d ing
Bra nd Co llec t ion o f the Glob a l Furniture Ma nufa c turing Ind ustry” at the site of the China
International Furniture Expo this year to enhance the industry’s development.
First Leading Brand Collection The First Leading Brand Collection aims to promote the upgrade of the furniture industry
to c reate maximum business value and also to build the best public relations platform for
furniture manufacturers. Bringing together nearly 100 new products and tec hnologies inwoodworking mac hinery and the furniture raw materials industry, along with excellent
high-tech support, FMC China 2013 will provide a solid foundation to help China become
the foremost furniture manufacturing nation. The First Leading Brand Collection, with a total
area of 800 sq. m, will be held a t the Shanghai New International Expo Centre (Hall E5).
The exhibits include: Furniture Hardware & Fittings, Furniture Panels & Surface Deco,
Furniture Fabric & Leather, Upholstery Furniture Components & Supplies, Cabinet/Wardrobe
Fittings, Of fice Furniture Supplies & Gas Spring, Furniture Coatings, and Adhesives & Chemicals
Products.
Exclusive exhibitors’ interactive promotionFMC China 2013 has also launched an Exhibitors’ Interac tive Promotion. Exhibitors who
successfully invite trade buyers to FMC China 2013 using any of the four methods below will
get special benefits in next year’s show, such as booth fee discounts, onsite video promotions,
brand promotions on the of ficial website and Weibo, catalogue advertisements and showpreview advertising discounts.
- Visitor invitations by exhibitors
- Of ficial website and Sina Weibo c ooperation
- FMC promotion on relevant exhibitions by exhibitors
- Advertising cooperation
FMC B2B buyer sourcing event The FMC B2B buyer sourcing event is a special service for buyers who have procurement
requirements. The organiser will help match trade buyers and furniture manufacturing
suppliers. Since FMC has a huge and high-quality database, the organiser will hold one-
on-one sourcing meetings for buyers, as well as hold Buyer Sourcing Events onsite to enable
both trade buyers and suppliers to sign up for deals.
5www.panelsfurnitureasia.com MARCH/APRIL 2013
PANELS & FURNITURE ASIA SHOWPREVIEW
11-14 September 2013, Shanghai World Expo Exhibition & Convention Centre
For FMC onlinepre-registration
please visit:
www.fmcchina.com
7/17/2019 March April 2013
http://slidepdf.com/reader/full/march-april-2013-568e012b267c0 59/82
58 MARCH/APRIL 2013 www.panelsfurnitureasia.com
SHOWPREVIEW PANELS & FURNITURE ASIA
• Unmatched international participation
• Concentrated innovations showcase
• High-caliber trade visitors
Forestry and timber industry professionals around the
world are counting down the days until LIGNA opens
its gates on 6 May.
“The world’s leading suppliers of plant, machinery
and equipment for the forest and timber industries
regard LIGNA as the ultimate benchmark event – the
fair where new products are launched and new trends
are set. And that’s prec isely what makes LIGNA so a t-
tractive for trade visitors. Every two years, in Hannover,
Germany, they can expect tofind an innovations show-
case that is without parallel anywhere in the world,”
said Dr. J ochen Köckler, member of Deutsche Messe
AG’s Managing Board.
“The strong level of international participation
at LIGNA also sets the fair apart from rival shows. It
enables professionals from all parts of the forest andtimber industries to get a complete overview of the
latest technology in their specific sec tor. Around 1,700
exhibitors, more than half of whom come from outside
Germany, will be presenting their innovations in Han-
nover from 6 to 10 May. In fact, some 50 countries will
be represented at LIGNA this year.”
Dr. J oc hen Köckler, Member of the Mana ging Bo a rdof Deutsche Messe AG, Hannover
Machinery and plant for the production of swan timber,Measuring a nd optimisa tion s ystems for roundwoo dya rds a nd s aw mills (LIG NA Hanno ver 2011)
7/17/2019 March April 2013
http://slidepdf.com/reader/full/march-april-2013-568e012b267c0 60/82
5www.panelsfurnitureasia.com MARCH/APRIL 2013
PANELS & FURNITURE ASIA SHOWPREVIEW
(Photos courtesy of Deutsche Messe)
The fair’s visitor profile is also highly international, with
more than a third of visitors travelling to Hannover from
other countries. “Visitor survey figures from LIGNA 2011
revealed that around 90,000 visitors from 90 countries
made the trip to Hannover. Ninety-five per cent were
industry professionals with high-level decision-making
authority,” reflec ted Köckler. “We expect a similar
turnout this year.”
The Top 10 countries among the participating na-
tions, which have booked a total of around 130,000
square meters (1.4 million sq. ft) of exhibition space,
are Germany, Italy, Austria, Spain, Switzerland, Sweden,
Denmark, Turkey, Taiwan, China and the Netherlands.
LIGNA’s broad range of display categories is another
big plus for decision makers. This year’s show, which
has “Making more out of wood: Innovations, Solutions,
Ef ficiency” as its keynote theme, will be covering the
entire wood va lue chain. It will feature the state of the
art in tec hnology for the primary industries – the forestry
and timber industries – right alongside the latest prod-
ucts, machines and automation technologies for the
furniture sector, the solid woodworking industry and the
woodworking trades.
LIGNA 2013 will put the spotlight on key g loba l
megatrends, such as sustainable, intelligent produc-
tion; highly customisable manufacturing systems and
flexibility-enhancing solutions for all levels of industrial
operations. Key innova tion drivers, such as surfac e
technology, lightweight construction, wood-based
bioenergy systems and window production technology,
will be presented as standa lone display categories and
feature a range of exhibits that is unmatched in its depth
and diversity. Other hotly anticipated displays include
the latest integrated control systems and multi-func-
tional production technologies and the broad range
of woodworking exhibits that comprise the “Handwerk,
Holz & mehr” showcase.
“What makes the LIGNA fair truly special is the
sheer number and variety of innovations shown there,”
Machinery, plant and facilities for industrial furniture production -
Automation systems - Industrial surface -treatment technology(LIG NA Ha nno ver 2011)
explained Köckler. “This is not least because many mar-
ket leaders have timed their innovation cycles to coin-
cide with LIGNA in odd-numbered years and use the
fair as a global launc h pad for their latest technology.”
Which is why woodworking and processingfirms in need
of more ef ficient technology solutions cannot afford to
miss LIGNA 2013. This is particularly true for companies
based outside Germany. While the Federal Republic’s
strong economic performance has enabled its local for-
est and wood industries to maintain healthy investment
levels, in many other countries critically important mod-
ernization measures have been postponed. This has
compromised the competitiveness of the companies
concerned, which have seen a rise in their export mar-
kets’ quality demands during the same period. It is for
these companies in particular that LIGNA represents an
excellent opportunity to regain their competitive edge
and boost their sales performance through carefully
targeted investment. The fair’s expanded offering of
space-saving simplified and easy-to-operate industrial
processing technology that offers significant productiv-
ity gains is another big drawcard. These and many other
technology highlights will contribute to making LIGNA
2013 the world’s biggest and comprehensive trade fair
for the forest and wood-based industries. Köckler: “We
are really rolling out the red carpet for our international
trade visitors this year.”
New online services for LIGNA visitors
Deutsche Messe has launched a range of new
digital services that will help attendees make the most
of their time in Hannover. Deutsche Messe’s highly tar-
geted worldwide visitor marketing and media relations
campaigns set the standard for new lead generation
and business network expansion. They are spec ifically
designed to cultivate and boost the international di-
mension of the visitor make-up at LIGNA.
Deutsche Messe’s “Match and Meet” service
matches up LIGNA exhibitors and trade visitors in a
targeted fashion via the Internet. Trade visitors first
create a personal profile at www.ligna.de, specifying
the kinds of products they are interested in. They then
automatica lly receive lists of matches, complete with
contact details, so that they can contact and arrange
meetings with potential business pa rtners.
Visitors to this year’s LIGNA show can also take ad-
vantage of the new LIGNA2go mobile trade fair guide.
The guide makes all the key LIGNA website functions
available to smartphone users. With LIGNA2go, trade
fair visitors can use their mobile phones to loc ate ex-
hibitors, produc ts, and events and to create their own
personal schedules. LIGNA2go also offers an interactive
map of the exhibition grounds complete with naviga-
tion directions. The guide can be downloaded free of
charge at www.ligna2go.de or the Apple App Store.
7/17/2019 March April 2013
http://slidepdf.com/reader/full/march-april-2013-568e012b267c0 61/82
60 MARCH/APRIL 2013 www.panelsfurnitureasia.com
SHOWPREVIEW PANELS & FURNITURE ASIA
Exhibitor Highlights
In the past years, the range of machinery and equip-ment that CMC -Texpan can provide to the wood-based materials industry has been extended to the
wood preparation area. Since then, several plants andmachines have already been installed and put into ser-vice all over the world. The results and the performancesdirectly achieved by customers in different industrialprocesses further demonstrate the company’s expertiseand skill, as well as the high quality of the machineryand equipment manufactured by CMC . In parallel withthe commitment to the industrial market, the companyalso devotes its best efforts and energy to the researchand development of new engineering concepts andapplied solutions aimed not only at increasing the ef-ficiency of the machines, but also at improving their
cost-saving features, so as to help customers reducetheir costs, this being a crucial key factor nowadays. The LIGNA 2013 exhibition will represent a great op-
portunity for CMC-Texpan to propose its well-establishedsolutions, but above all to showcase its brand newproducts:
CMC-Texpan
EcoSpanResinator This is a system for blending wooden particles with glue
and it is used in the production of particleboard. It hasalready been installed in an industrial facility and it hasshown very attractive advantages in terms of gluingresin, as well as in terms of (thermal and electric) en-ergy saving: the paybac k period for the whole systemis some months only!
The machine includes a device that d ivides theparticle flow into light, uniform layers: the gluing mix-ture with catalyst is then low-pressure sprayed andfinely atomized from both sides on the particle layers.
The complete system can be easily fitted also intoexisting plants, without modifications: traditional glue
blenders are no more required, what results in electricand thermal energy saving, as well as in obviating theneed for expensive periodic maintenance, continual
replacement of wear parts and c omplicated cleaningprocedures. The device is equipped with an automaticnozzle function check, as well as with a c leaning systemthat doesn’t require cleaning fluids to be introducedinto the machine, thus avoiding any possible pollu-tion and/or further contamination. There are also sidewindows, through which operators can easily carry outa visual inspection inside the machine even while thesame is in function.
HP Wind Former The quality and ef ficiency of CMC-Texpan forming
mac hines is widely demonstrated by the great numberof machines currently running and it is backed by morethan 40 years of experience in this field. CMC’s strongdetermination in steadily refining each and every singledetail to achieve better performances resulted in anew system for an optimised distribution of the airflowinside wind forming chambers. This newly developedsystem for air blowing and adjustment makes it possibleto control the airflow distribution in a more prec ise way,thus obtaining a more uniform airflow at the outlet ofevery single blowing nozzle and drastically reducing theneed for periodic cleaning. The device has been spe-cifically designed for being used also as an alternative
to CMC ’s traditional system and it has been conceivedin order to provide a simpler and easier access, so asto facilitate c leaning procedures. The aim of this newsystem is a further optimisation of surface forming preci-sion, so that customers can produce particleboard witha flawless, extremely high-quality surface finish, which ismore suitable for melamine coating with delicate, topgrade decorative paper, reducing also any possiblesurface defec ts which otherwise would deprec iate thefinished product.
Visit CMC-Texpan at Hall 27, Stand F35
7/17/2019 March April 2013
http://slidepdf.com/reader/full/march-april-2013-568e012b267c0 62/82
Siempelkamp
6www.panelsfurnitureasia.com MARCH/APRIL 2013
PANELS & FURNITURE ASIA SHOWPREVIEW
Exhibitor Highlight
At LIGNA, the Siempelkamp machine and plant en-gineering company is presented as a provider forcomplete wood-based panel production plants for
the manufacturing of particleboard, MDF/HDF, andOSB. Together with its subsidiaries Büttner, CMC Texpan,Hombak, Ventapp, and Siempelkamp Logistics & Ser-vice, Siempelkamp represents the complete productrange including planning, engineering, production,installation, startup and service.
The strong cooperation within the group of compa-nies allows Siempelkamp to provide, from one source,the complete machinery for the front-end, energyplants, dryers, resin blending and application systems,forming and press lines with the proven ContiRoll®press,cooling and stacking lines, storage systems, sanding
and cut-to-size lines, packing lines, and short-cyclepresses for surface laminating.
Important components were further technicallyoptimised and geared towards savings. Next to theinnovative chippers and flakers by Hombak, the new
machine technology used to achieve resin savings ofup to 20% in the production of MDF and particleboardplays an especially important role at LIGNA 2013. The
innovative wind former integrated in the forming lines ofparticleboard plants is also expected to attract profes-sionals from the industry.
The key component, however, still is the continuousContiRoll® press. Meanwhile in the eighth generation,the ContiRoll® features a practically isobaric pressuredistribution due to the use of innovative pressure dis-tribution plates, a higher number of cylinders, and dif-ferential cylinders that are arranged across the widthof the press frames. The improved pressure distributioninside the press leads to material savings of up to 15%.
The new pull-back cylinders at the upper hot platen
allow the flexible production of lighter boards.
Visit Siempelkamp at Hall 27, Stand F35
7/17/2019 March April 2013
http://slidepdf.com/reader/full/march-april-2013-568e012b267c0 63/82
Huntsman
62 MARCH/APRIL 2013 www.panelsfurnitureasia.com
SHOWPREVIEW PANELS & FURNITURE ASIA
Exhibitor Highlights
Visit Huntsman at Hall 27, Stand G05
Structure, character, depth and a rustic appeal: thoseare the characteristics which wood obtains when ithas been machined by a Boere Select X-Line brushtexturing machine.
Texturing gives wood a more natural look. Thanksto the oscillating brush system, the wood grain willbe smoothly followed resulting in a stripeless and softfeeling finish. When the X-Line unit first of all sands thewooden surfaces cross the grain, the structure will geta sawcut or scarved look. The result is a strong and fullof character radiating wood.
Boere presents this newly developed Select X-Linebrush texturing machine at Ligna. Various productsamples will show the many possibilities which can berealised on solid wood and veneered panels. The ma-chine is very popular within the flooring, furniture and
joinery industry.Besides brush texturing machines, Boere is a spe-
cialist in delivering custom-made wide belt sandingmachines which are fully adapted to the wishes ofthe customer. Boere’s guide always is the customer’sproduct: floor parts, windows, doors, furniture parts,glued panels, wooden boxes, rubber, plastics, yachtdecks, yacht interiors, insulation material, HPL, kitchentops (also out of plastics) and metal. Boere fully deliversquality machine sanding.
The wide belt sanding machines which Boere willshow at the Ligna are:
Expert technical teams from MDI (Methylene DiphenylDi-isoc yanate) resin supplier Huntsman will be on handat the show to discuss MDI and its applications, which
include OSB, MDF, particleboard and wood fibre insula-tion manufacture, as well as the latest technologicaldevelopments in their I-BOND(r) product range andI-RELEASE(r) solutions. Commercial representatives fromAsia, North America and Europe will also be availableto discuss the specific demands of composite woodpanel manufac turers from around the world.
Speaking about the show, Berliana Harnadewi,Huntsman Marketing Manager for Asia, said: “Havingparticipating for many years at Ligna we’ve seen asteady increase in interest in MDI year on year, espec ial-ly for the Asian market. With ‘no added formaldehyde’
benefits, improved performance, reduced costs on am3 basis and a globa l supply chain, it’s no wonder thatMDI is becoming increasingly popular and that Hunts-
man has become the adhesive partner of choice forthe composite wood panel industry.”
Detailed cost models and further information onthe latest binding technologies are sure to make Hunts-man’s stand a must visit for manufac turers.
“Ligna is the premiere show in the c omposite woodpanel producers’ diary. It gives us the opportunity tomeet new and existing customers in person to dis-cuss everything from the latest I-BOND(r) resins andI-RELEASE(r) solutions, through to logistics and delivery,”conc ludes Berliana.
Boere Machinefabriek BV
• SELECT +PLUS+: a machine offering ma ny ad-vantages compared to its reliable predecessor andwhich is standard equipped with long sanding belts,thickness sensor, extendable infeed roller table, fixedfeed height, touch screen operation. As an option, themachine can be upgraded with a veneer, lacquer ortexturing package;
• SANDRITE: Boere’s basic model, this model 1 and2 unit mac hine for the smaller and medium-sized com-pany is also available with three sanding units. What-ever is chosen, the unique modular machine conceptcombined with the excellent price-quality ratio providesfor a quickly recovered investment;
• ELITE: these veryheavy machines havethe same flexible techni-ca l specification possibili-ties as is the case with theSELECT +PLUS+ and SAN-
DRITE models. However,through their very heavyconstruction, they aremore apt for companiesworking in two or threeshifts under very heavyworking conditions.
Visit Boere Machinefabriek BV at Hall 11, Stand B50
7/17/2019 March April 2013
http://slidepdf.com/reader/full/march-april-2013-568e012b267c0 64/82
6www.panelsfurnitureasia.com MARCH/APRIL 2013
PANELS & FURNITURE ASIA SHOWPREVIEW
Exhibitor Highlight
Specialist in wood reduction and flake comminution,Pessa Impianti srl designs and manufactures machineryand lines for the primary working of wood and flake
preparation. The company supplies a full range of sys-tems and equipment with complementary functions forworking improvements and full automation of flakingand chipping lines. It offers an ef ficient support in engi-neering. In details, the production includes:
- machines for the primary working of wood andrecovery of wood wastes such as discontinuousflakersand drum chippers;
- milling mac hines and shredders;- wood feeders, wood handling and storage sytems;- machines for particle comminution such as knife
ring flakers, hammer mills, refining mills;
- storage silos, mixing and extraction systems forflakes, chips, sawdust;
- particle conveyors and auxiliary equipments The production range was recently increased with
the new ‘wood shaving machines’ type PL for animalbedding soft flakes, qualified for animal comfort.
Pessa Impiant
Visit Pessa Impianti at Hall 27, Stand J52
7/17/2019 March April 2013
http://slidepdf.com/reader/full/march-april-2013-568e012b267c0 65/82
64 MARCH/APRIL 2013 www.panelsfurnitureasia.com
SHOWPREVIEW PANELS & FURNITURE ASIA
Exhibitor Highlights
Weinig will be in attendance in Hanover to present itselfas a leader of technology with expertise across theentire solid wood processing chain. Hall 12 will feature
30 exhibits over 3,800 sq m, including innovations andevolutions in all four product segments. The Holz-Herstand will be directly adjacent in Hall 11, underliningthe expertise of the Weinig Group in the processing ofderived timber products.
The Powermat series, exhibited in full with the 600,1200, 2400 and 2500 models, offers an ideal platform inthis area. Demonstrations will include an angled spindle,vertical floating spindle and 3D structuring. The newback-pressure system prevents “snipes” and “dips” atthe final lower spindle.New: MemoryPlus 2.0 — MemoryPlus is the new entry-
level control system from Weinig for customers with asmall variety of profiles. The EasySet function correctsany measuring errors on the tool quickly and easily.MemoryPlus allows the mobile spindle as well as achamfering unit to be controlled or glazing beads tobe separated.New: Pointed tooth roller 2.0 — The outstanding featureof the new generation of Weinig feed rollers is their bet-ter grip, which ensures optimised workpiece transport.
The lower c ontac t pressure reduces indentations in
Weinig
the wood. Reduced wear and build-up of debris alsoextend the service life of the rollers.New: 90° chamfering unit — The new chamfering unit
has axles that are independent of the spindles. Theinstallation at a 90°-angle allows the production ofchamfers with curves and radii.Further developments with CUBE and mat — With thenew automatic stacker, Weinig extends the range ofaccessories for the compact entry-level 4-sider CUBE.Operation and charging are now significantly easier.
The tried and tested Powermat 2400 SP splitting unithas been optimised. An improved splitting wedgesystem ensures longer tool service life, precision andincreased safety.New: Conturex Compact — The new model extends the
renowned Conturex series with a machine particularlytailored to the requirements of small workshop busi-nesses. Conturex Compact has a similarly high degreeof flexibility to the series in the upper performance seg-ment, which have a lso been optimised in terms of flex-ibility and performance. This enhancement can be seenat LIGNA as Conturex 124. To use the braking energy,the Conturex is equipped with an energy refeed unit.In addition, frequency converters facilitate demand-oriented drive - depending on processing parameterssuch as speed and feed speed.Enhancements to Multirex — The new Multirex genera-tion has an external tool magazine with a length of 6.5mand its own axle. This enables transfer of the tool to thetool holder in the machine with no loss of time - regard-less of the current position of the machine with the mainspindle. In addition, the new Multirex generation is in aposition to automatically control peripherals, enablingproblem-free exchange of data from the cutting list ordata for subsequent driving in of dowels.New: Systems technology for large and small produc-
tion lines — Weinig will be exhibiting the world’sfirst fully-automated pre-cutting system in OptiLink, the Weinigsoftware solution for 2D optimisation. The line includesa CombiScan 200 R scanner for ripsawing and c utting,
a ProfiRip 450 Speed optimising circular saw and anOptiCut 450 FJ + III high-speed optimising cross-cut sawwith ST 10-1500 automatic stacker. The entire system isconnected via the OptiLink software, which was initiallypresented as a concept in 2011 and now comes tothe market as a solution for the networked productionprocess of production lines with several scanners.New range of accessories — Weinig will also be pre-senting a new range of accessories for pushfeed saws.
These will enable work processes that follow “cutting”to be further automated or integrated into the process.
The new Superdrill unit combines the work processes ofMultirex - New generation with minimised set-up times
Powermat 2400 -Ideal platform for series production
7/17/2019 March April 2013
http://slidepdf.com/reader/full/march-april-2013-568e012b267c0 66/82
6www.panelsfurnitureasia.com MARCH/APRIL 2013
PANELS & FURNITURE ASIA SHOWPREVIEW
Exhibitor Highlight
cutting / drilling and cutting / milling in a single pass. TheIPPC branding iron automatically burns the logo intothe workpiece following cutting. In the saw outfeed,the package stacker provides reliable stacking of thefixed lengths cut in the package.
ProfiPress L II Comfort — The ProfiPress II Comfort high-fre-quency gluing press has semi-automatic glue deliverywith a conveyor belt and c harging via a plate chain. Afurther highlight is press cylinders with height adjustmentthat can be switched off via solenoid valves. The gluingpress is characterised by simple operation, optimal useof energy and low floor space requirement combinedwith high performance.New: Two optimising circular saws — For the first time,the optimising circular saw ProfiRip 450 is presented witha cutting width of 450 mm and up to 4-fold blade ad-
justment. In a further innovation, the optimising circular
saw Profi
Rip 310 is presented with a cutting width of 310mm and up to 3-fold blade adjustment. The flexible lon-gitudinal circular saw FlexiRip 3200 has been enhancedwith new features. These include automatic cuttingheight recognition, load-dependent feed control anda width optimisation program.New: Band resaw BK60 / BK80 — The new band sawreaches feed rates of up to 60 m/min in standard config-uration, and up to 80 m/min with the high-performancepackage. Sensor-based measurement of the boardsprior to infeed allows for optimized outfeed of threeequally wide pieces. The BK features a sound-insulatedsafety cabin. All adjustments are made conveniently
from the outside.New: PowerJoint 8 — Weinig will also be using LIGNAto present the fastest compact finger jointing line onthe market in the glulam production segment. The newProfi J oint 8 allows timber with up to 8 connections tobe centrally milled and pressed per minute. The finger
jointing line will be on display at the Alfeld plant. New:
Ultra TT 2000 — The Ultra TT 2000 from the GreconLine isa package finger jointing line for incoming lengths ofup to 2,000 mm. The combination of a full-automatedrotary table and a belt before the packet chamfermakes this system a performance giant. When a timber
package is milled, the rotary table can be simultane-ously charged with an unprocessed timber package.New: Double-end machine — The new double-endmachine reinforces Weinig’s orientation as a completeprovider. The double-end machine the logical extensionof thefinishing construction kit, which previously focusedon finger jointing lines at the Alfeld operation. Thedouble-end machine a llows us to particularly addresscompanies in the furniture, board, window, flooring,insulation, construction timber and solid wood industries.
Visit Weinig at Hall 12
7/17/2019 March April 2013
http://slidepdf.com/reader/full/march-april-2013-568e012b267c0 67/82
66 MARCH/APRIL 2013 www.panelsfurnitureasia.com
SHOWPREVIEW PANELS & FURNITURE ASIA
Exhibitor Highlights
Visit VYNCKE N.V. at Hall 13, Stand D41 and
Hall 27, Stand H12
VYNCKE is participating at LIGNA for the 18th time intheir 100-year existence. This time, with an even big-ger second booth. Where for some other suppliers,
the energy system is just one of the many parts in theirproduct portfolio, Vyncke is demonstrating its well-known focus on biomass energy solutions for the woodindustry. With a highly developed customer orientedapproach, Vyncke provides the opportunity to clientswith any energy demand to cooperate with the realspecialist when it comes to biomass combustion systemsand plants, without losing guarantees on the total per-formance of the fac tory. Also, future service and spareparts supply at acceptable commercial conditions areguaranteed.
Vyncke likes to operate in a no-nonsense way, which
makes them stand out of the crowd. Several multina-tionals have already chosen to work with Vyncke andthere are more to come. Ligna will be the perfect eventto reveal the new partnerships.
Next to showcasing their new realisations, Vynckewill also focus on the latest developments in combustiontechnology and new biomass sources. Vyncke is realis-ing several power plants using biomass for cogenerationprojects in France, Argentina, Singapore and China.Visitors will have the opportunity to look into and discussthese projec ts during the Ligna fair.
Converting biomass into a commodity fuel, such aswood pellets, is an important part of Vyncke’s activities,this by providing energy to low temperature belt dryersor high temperature drum dryers. Several cooperationalliances have been set up and Vyncke will presentenergy plants, energy plants with dryers and/or steamturbines and other applications. Vyncke’s VYLOSOFY is that the customer always decides how he wants toproceed.
Next to business there will of course also be pleasureat the Vyncke booth. Visitors can have a drink and chat
VYNCKE
at the renowned Vyncke bar. Vyncke is planning to setLigna on fire a t the occasion of their 100th anniversary!
The Vynckeneers want to celebrate their birthday to-
gether with their customers during the fair.VYNCKE N.V. is an expert and a global player when
it comes to reusing industrial biomass residue as fuel.With their 100 years experience in combustion technol-ogy, boiler construction, boiler control and commandtechnologies, Vyncke can offer end-to-end solutions.From design, engineering, construction, installation,assembly, commissioning, training to follow-up, it is allwithin their scope. Vyncke builds thermal solutions from1 to 100 MW
thand electrical power plant solutions from
0.5 to 20 MWe. Worldwide 300 Vynckeneers are active
in Canada, Brazil, Belgium, Germany, Czech Republic,
India, China, Thailand, Malaysia and Singapore.
Leading press belt manufacturer Sandvik Process Sys-tems will launch two important new service innovations:one for more ef ficient steel belt cleaning, the other de-signed to improve the quality of press belt repairs and,in turn, the quality of end product. The overall theme willbe Sandvik’s ability to help WBP manufacturers achievemaximum product quality – an important differentiatingfactor in what is an increasingly competitive market– while the same time maximising press productivity.
The company will also be revealing plans for a
Sandvik Process Systemsnetwork of regional Productivity and Design Centers insupport of this initiative. Sandvik is also a world leaderin textured press plates and endless press belts fordecorative panels and the furniture industry, and willbe showcasing its capabilities in registered embossingand the new opportunities available to customers as aresult of its investment in digital printing solutions.
VYNCKE 45MW multimed ia ene rgy plan t for Durat ex a t Ta q ua ri - Bra zil
Visit Sandvik Process Systems at Hall 27, Stand F20
7/17/2019 March April 2013
http://slidepdf.com/reader/full/march-april-2013-568e012b267c0 68/82
Steinemann
Satos plus
6www.panelsfurnitureasia.com MARCH/APRIL 2013
PANELS & FURNITURE ASIA SHOWPREVIEW
Exhibitor Highlight
Visit Bürkle at Hall 17, Stand F13
Steinemann
Visit Steinemann at Hall 27, Booth G37
At Ligna, Robert Bürkle GmbH will present their innova-tions in press and laminating technologies for surfacefinishing of furniture parts and wood-based panelswith the slogan “Bürkle makes it easy”. A great steptowards resource protec tion has been reac hed by thecompany with surface finishing, resp. lacquering lines by combining different machine types to a uniformplatform. Up to now, there have been eight differentbase frames for the roller coating machines. Today,Bürkle uses a modular system with only one base frameper working width. The number of used gears is reducedby standardisation: Four gear types are covering thewhole spectrum now. They are based on the modu-lar system of SEW-Eurodrive with only slight changes.
Through measuring's on existing machines, Bürkle couldfind out the actually required torque moments. Bürklemanaged to standardise the gear size and to cover thecurrent requirements of all roller coating machines. Intheir designs, the company only uses one hollow shaftfor the whole gear spectrum.
On a newly developed foil laminating line that willbe presented, you can laminate MDF boards, chip-boards and lightboards with PUR hot melt and highgloss foils resp. with laminates. A lay-up table with fullsize support and a conveyor belt are integrated in theline. The table for the coating material is equipped withseveral daylights and different line types are offered
Robert Bürkle GmbH
for numerous requirements in performance. Highlightsof the glue spreading machine are newly developed,electrically-heated applying and doctor rollers thatensure temperature accurac y onto the roller surfac e.
Bürkle will also present a modified “M8” for the 3D foillamination of furniture parts at Ligna. The space-savingdesign offers high automation degree for small andmedium lot sizes. Extremely high and bent parts canbe laminated through a chamber height of 200mm.
Bürkle develops and optimises their lightboard lines continuously. An example is the BOS (Boards on stile)system which has been brought into perfection. It is inthe position to produce a ll known light boards with bars.In contrary, the full frame system (Board on frame) is a
new evolution step. The latest door platen technology completes theBürkle concept. The Optima press with 2x2 daylights,highlight of the fully-automated processing line for lot"size 1", will be showcased. All raw materials such asinlays and top layers as well as stiles and rails are au-tomatically fed to the lay-up area order by order andare assembled accordingly.
Bürkle will also set trends with the next generation ofUV-LED-based curing technology “e.a.sy-Line” – devel-oped for transparent and pigmented lacquers.
Steinemann will be displaying its sanding systems atLigna, with options ranging all the way to full automa-tion.New at Ligna is the Satos eco – a sander designedwith a hands-on approach, with features that quicklypay off in the sanding process. The Satos range alsoincludes the top seller, the Satos, which is made of castmineral to absorb vibrations. And the Satos plus, theSteinemannflagship. With its fully automated functions,it meets the demands for high machine availability,consistent panel quality and cost-ef ficiency like no
other sander on the market.One of the key components of all Steinemann
sanding systems are the top-class, durable contactand c alibration drums (they last at least twice as longas competitor products on average). Steinemann in-vested more than 1.2 million Swiss Francs in a new high
prec ision turning centre at its Swiss headquarters at thestart of the year.
Steinemann's "Green Line" upgrade will also present-
ed at Ligna. Thanks to the Energy Save mode, roughly30 to 40% of the energy consumption per sanding headcan be saved during no-load operation (depending onthe size of the motor).
Leading expertise is also embodied in the new ArgosGrading System, for which Steinemann has been theexclusive distributor for some months. This cooperationwith Argos Solutions (Norway) will be making its débutat Ligna. There is great demand for accurate onlinemonitoring to detect and categorise surface defectsand finally save money. Specifically developed for MDFand particle boards, the Argos Grading System finds
even the smallest defects, such as grit marks, resin oroil stains, broken edges, pinholes, blisters or unsandedspots. Things that the human eye can no longer see atspeeds in excess of 30 m/min, can be detec ted by theArgos Grading System even at the maximum speed ofup to 100 m/min.
7/17/2019 March April 2013
http://slidepdf.com/reader/full/march-april-2013-568e012b267c0 69/82
68 MARCH/APRIL 2013 www.panelsfurnitureasia.com
SHOWPREVIEW PANELS & FURNITURE ASIA
Exhibitor Highlights
Solutions to make daily work easier, to improve ef-ficiency, to prevent errors, to increase flexibility andoutput – HOLZMA will be showcasing many innova-
tions on this theme at LIGNA 2013. New technologies,new processes and a completely revamped productportfolio provide for more ef ficiency in panel cutting.
Both craft producers and industrial establishmentstoday often produce in small quantities or even just onepiec e. They use a wide variety of, often highly sensitive,materials and have to face up to increasing deadlineand cost pressure. This calls for modern machinery thatcan be individually adapted to meet the needs of thecompany and delivers a fast return on investment.
HOLZMA now provides a new dimension of thisfreedom. The German engineering company has radi-
cally revamped, streamlined and simplified its range ofproducts in the 2, 3 and 4 series. For instance, there arenow more optiona l extras for many of the saw models.
That saves costs, simplifies investment decisions andincreases flexibility – also for retrofits at a later date.
New solutions for intelligent handlingHOLZMA has conducted in-depth analysis of pro-
cesses related to cutting operations and offers moreand more concepts to reduce inef ficient non-produc-tive time. With the interests of its customers in mind,HOLZMA provides for greater ef ficiency in productionin this area too. The latest innovation, a worldwide first,is going to be launched at the LIGNA fa ir. With this newproduct, HOLZMA ensures ergonomic destacking:
• Smooth processes• Minimisation of errors• No bottlenecks at the saw caused by workers• Better ergonomics• Flexible use of personnel
HOLZMA
Two other new developments from HOLZMA awa it
visitors of this year‘s LIGNA fair in Hall 26 – in the Inno-vation Centre of the HOMAG Group. Only this muchnow: on show will be a long-established technologysupplemented by an enhancement which is unique onthe market. Furthermore, the Innovation Centre will bepresenting a solution with completely new approac hesin panel sizing technology.
Further new developments relating to panel sizinground off the HOLZMA highlights at the fair. These rangefrom new ecoPlus technologies for even greater energysavings to optimized extraction solutions, innovations forthe in-topic of saw-store combinations and new soft-ware products from HOLZMA. For example, new toolsand options for the CADmatic machine controller andthe new version 9 of the optimization software C ut Ritewill be demonstrated. The Systems Engineering team willalso be present at the fair, as will the HOLZMA Serviceteam with attractive fair offers.
In Hall 11:
• HPP 250 Optimat linked to a BARGSTEDT horizontal stor-age system, espec ially for small and medium-sized firms• HPP 380 Optimat with the space-saving lift table feed-ing solution Easy2Feed
In Hall 26:• HPL 570 profiLine• HPP 380 profiLine linked to a BARGSTEDT horizontalstorage system and with new destacking software forlarger firms and industrial operations• HKL 380 profiLine angular system• Here you will also find the new extraction technologyand the Innovation Centre
Visit Holzma at Hall 11, Stand D13 and Hall 26,
Stand D10
On e xhibit in Ha ll 26: HOLZMA HKL 380ang ular system
Automatic labelling near the pressure beam creates transparency, pre-vents errors, ensures smoo th wo rkflows .
7/17/2019 March April 2013
http://slidepdf.com/reader/full/march-april-2013-568e012b267c0 70/82
6www.panelsfurnitureasia.com MARCH/APRIL 2013
PANELS & FURNITURE ASIA SHOWPREVIEW
Exhibitor Highlight
Visit IMAL-PAL at Hall 27, Stand G52/G46
The Imal-Pal group maintained its position in 2012 as aworld leader in the production and supply of completeplants, machinery and innovative systems for the manu-
facture and processing of particleboard, MDF, OSB,insulation board, pellets and pallet blocks. The groupfurther strengthened its presence on the market whenit was joined by Globus Srl last year, a merge which hascompleted and amplified the wide range of servicesand products offered.
Some of the innovations which Imal will be showc as-ing at Ligna include its own revolutionary and innovativecontinuous DynaSteampress, the only continuous pressin the world which injects steam, is able to increaseproductivity by over 30%, and significantly improvethe surfac e properties of the board with a consequent
reduction in the amount of resin utilised. The Dynasteam, a small pre-press mounted at theinfeed to existing continuous MDF, PB and OSB presseswill also be on show. This system injec ts saturated steaminto the mat as it pre-compresses it, without creatingcondensation.
Furthermore, three new high pressure resination sys-tems have been designed for particleboard, OSB andMDF production respec tively with which it is possible toreduce resin consumption by at least 10% but withoutimpacting on board quality.
Other new laboratory equipment will also be pre-sented together with thefirst ever blown board detectorwhich is able to detect blisters and other defects overthe entire surface of the board.
Pal will be presenting its new C leaning Tower at theLigna which is able to clean all kinds of pollutants fromthe flow of wood chips. This new cleaning technologycombines three grading principles: the first being thatof demetallisation accomplished with highly ef ficientmagnetic systems; the second adopts the principle ofaerodynamics, where inert substances are separated
IMAL-PAL
from the wood particle flow by a jet of air which re-moves them on the basis of their density, surface andshape; and lastly the spectrographic principle which
optically identifies the spectrum of the wood and allthe other contaminants and, by applying jets of com-pressed air, separates out all the materials which arenot wood. With this principle, it is also possible to identifyblac k bodies which, despite being unclassified material,may be separated out from the wood.
Globus, now part of the Imal-Pal group, will bepresenting the “Globus wobble spreader disk”, an in-novative system with which it is possible to achieve aradical improvement in the quality and capacity offlake production. The wobble spreader disk continu-ously distributes chips over the full length of the knife
thus making it possible to improve quality. The increasein capacity is accomplished with 690mm long knives, alength which no other competitor has ever used on aflaker before, and which can produce up to 15 t/h bdof flakes, depending on the wood species.
The “Year of the Ring” stands for a great improvementinflaker production technology for particleboard pro-duction. In fact, two of the most important Europeanwood-based panel groups have decided to test the“Globus wobble spreader disk” to achieve a radicalimprovement in the quality and capacity of flakeproduction.
The wobble spreader disk continuously distributes
Globus
chips over the full length of the knife thus making it pos-sible to improve quality. The improvement in capacity isaccomplished with the 690mm long knives which canproduce up to 15 t/h bd of flakes, depending on thewood spec ies. Customers are welcome to visit the Glo-bus booth for further details on the “Year of the Ring”.
Visit Globus at Hall 27, Stand G51
7/17/2019 March April 2013
http://slidepdf.com/reader/full/march-april-2013-568e012b267c0 71/82
70 MARCH/APRIL 2013 www.panelsfurnitureasia.com
SHOWPREVIEW PANELS & FURNITURE ASIA
Exhibitor Highlights
After more than 20 years from the invention of the re-covery system manufactured for spraying machines,Cefla Finishing will present its new EASY sprayer at
Ligna. It is a fully redesigned machine with enhancedperformance to continue to be the benchmark forthe market.
Cefla FinishingUV-R LED: Cefla Finishing has always been a pioneer inthe study of UV technologies and brought to market,since the 70s, major technical and technological in-novations. Today, a new era is beginning for UV curing,that is the era of UV-R LED.
Cefla Finishing has developed a new product for thisapplication by adopting the most advanced technol-
ogy available today. A full LED and a hybrid versionare available to suit every working need. The LEDigio
is a source of very cold UV light that has big ad-vantages for those substrates (such as pine) that aresensitive to temperature. The new UV-R LED also enablesa rapid switching off and ignition for maximum savingof electric power.
UV-R SUPERFOC US SP: Cefla Finishing will also pres-ent the UV-R SUPERFOCUS (patented system), the UVoven ideal for spray lines having width of 1,300mmwhich, with a single lamp, allows to cure the pieceson all sides, both with clear and pigmented coats. Thissystem reduces the required electrical power by halfand the heat on the workpiece, in addition, obviously,to be a more compact solution.
PRIMA: The automatic spraying machine PRIMA isthe natural choice for anyone who wants to improvethe ef ficiency and quality of manual coating operations
Cefla Finishing Group
and at the same time to dramatically reduce operat-ing costs.
iBOTIC: The robot iBotic is the ultimate expression of
panel spraying technology; it ensures the highest qualityfinishing even when processing shapes and edges ofparticular complexity. The advanced mechanics al-low to achieve a speed of the linear axes up to 130m/min. The two arms are independent of eac h other andcan move individually or simultaneously, allowing theproduct change in hidden times.
Decodigit The Pixart PLOT and Single Pass is an important innova-tion which allows customisation of products with unlim-ited ideas and imagination from the designers. Pixart
PLOT is ideal for high-definition printing and large format. The multipass solution enables to process extremelylarge sizes, even in case of raised cabinet doors, with-out compromising the quality and the resolution. Idealfor high-speed printing and productivity, the Pixart 350Singe Pass solution helps to meet productivity require-ments while maintaining the necessaryflexibility to easilymanage extremely small lots.
Delle VedoveDelle Vedove will exhibit two widely tested technologiesfor the entry level market and for the selective protec-tion of the profiles. They will be exhibiting a Flexispray
P rima iGiotto
7/17/2019 March April 2013
http://slidepdf.com/reader/full/march-april-2013-568e012b267c0 72/82
7www.panelsfurnitureasia.com MARCH/APRIL 2013
PANELS & FURNITURE ASIA SHOWPREVIEW
Exhibitor Highlight
Visit Firefly at Hall 27, Stand G59 and Hall 13, Stand D13
spraying machine, followed by Talent, a vacuum systemfor coating only the visible parts, which guarantees agreat saving of coating product.
Düspohl
Düspohl will present its latest RoboWrap profile wrap-ping machine, featuring a completely automatic set-up. RoboWrap meets the producer’s requirements ofshorter set-up times with simultaneously smaller lot sizes,as well as it reduces these times to only two minutes byemploying both modern and tested robot technology.
RoboWrap puts every other conventional solutionin the shade, when the total of 19 six-axis robots inde-pendently access the optimum pressure rollers andposition them on the profile with a repetition accurac yof only 0.03mm. This new mac hine conc ept comprisesautomatic positioning systems for all format-dependent
machine assemblies, beginning with charging and car-rying on to protec tive film application.In addition, Düspohl will also present the following:
- The AutoCut film slitting machine – equipped withautomatic slitter positioning that slits a wide varietyof papers and films and produces perfect, ultra-tightwinding results.- The EasyWrap wrapping machine – whether startingout or long-standing professional, the intelligent con-cept convinces, thanks to its extremely good ratio ofinvestment volume to functiona lity.
FalcioniiGiotto is an innovative system for automatic sprayingof small and medium lots of windows, which integratesan anthropomorphous robot assuring extremely highperformance and reliability, with the best detectiontechnologies and spraying techniques which areadopted for very large Cartesian sizes proper to the
windows (including height up to 3,000 mm). A spray toolcombining the action of two guns, which can a lso beactivated at the same time, ensures the best applica-tion of high-performance water-based coatings in highquantities, proper to the windows sector.
Sorbini The Inert C oating Tec hnology (patented) allows toprepare in a perfect way the sealer on the panels ofany kind (MDF, HDF, raw chipboard, honeycomb, andmore) with considerable savings in terms of occupiedarea, of electric power, CO 2 emitted, and, especially,of coating product. All this results in a lower environ-mental impact by approximately 75% compared tothe traditiona l lines.
SMARTEDGE: This innovative process widely testedby various customers around the world, allows to fill with
ease and flexibility chipboard or MDF edges in a veryreduced space, thus obtaining a surface of mechani-cal resistance stronger than by any other system onthe market today.
At Ligna, Sorbini will present a machine on opera-tion for processing the edge: for both pigmented c ycleby vacuum coater on MDF edges, and for filling of thechipboard edge integrated with the Inert Coating
Technology process. At Ligna, Sorbini will present amachine on operation for processing the edge: for bothpigmented cycle by vacuum coater on MDF edges,and for filling of the chipboard edge integrated withthe Inert Coating Technology process.
SMARTPARQUET: Ideal for the application of naturaloils, oils and UV coating products, urethane oils andtraditional waxes as well as stains and pigmentedproducts.
Visit Cefla Finishing Group at Hall 17, Stand F33/D32
and Hall 12, Stand E45
With 40 years of experience in providing preventivefireprotection to the proc ess industries, Firefly now offers its
new system generation, EXIMIO. With robust productsdesigned for the toughest industrial environments, Fireflyprovides premium safety solutions for the worldwideprocess industries.
EXIMIO is a state-of-the-art and user friendly systemthat offers a lower Total Cost of Ownership as its pat-ented technologies maximise safety and minimise falsealarms which saves costly production time.
Firefly
7/17/2019 March April 2013
http://slidepdf.com/reader/full/march-april-2013-568e012b267c0 73/82
72 MARCH/APRIL 2013 www.panelsfurnitureasia.com
SHOWPREVIEW PANELS & FURNITURE ASIA
Exhibitor Highlights
Finding profitable solutions for every customer is thefocus of Raute’s participation in Ligna 2013. Come tosee how their product families RautePro, Rauteselect
and RauteSmart cover the needs of every plywood andLVL producer in every area of the world.
Raute will show how their network of global servicecentres and service points can support customers withspare parts and strong mechanical and automationknow-how. Learn how to optimise your investment,whether through the installation of new equipment orthe modernisation of existing machinery. Find out themost profitable solutions for you.
If your business is plywood, talk to Raute’s staff aboutpeeling, drying, pressing, and panel handling. Get toknow the new solutions in the field of green energy.
Raute Corp.
Visit Wiesloch GmbH at Hall 27, Stand H18
Visit Raute Corporation at Hall 27, Stand J38
A long-term key-client in the North American woodprocessing industry, already operating a total of 10wood waste-fired Wiesloch-thermal oil heater plantsin various lumber mills in both, British Columbia andAlberta, placed the order for two sets of two biomass-fired thermal oil heaters with the NEC-group. Thesenew systems, each having a nominal thermal oil heat-ing capacity of 28 MW, will provide heat to an equal
number of ORC-turbo generators for de-central powergeneration.
British Columbia has been fac ing an enormous en-vironmental catastrophe, caused by the “pine beetle”.It was evident that the huge amount of damagedand dying biomass rotting away in the forest neededto be brought to a practical and economical use byall means. Pretty much at the same time, B.C. Hydro
Wiesloch GmbH
invited for a competitive tender on renewable electric-ity, a process that is quite controversial to other partsof the globe as e.g. to Europe where “green power” isconsiderably subsidised.
After a comprehensive bidding process Wiesloch'sclient was awarded the contrac ts for two power stationsin British Columbia, each generating 13 MW
el gross and
feeding 10 MWel net to the public grid.
The “classeneers“, being c o-founders and proudmembers of the NEC-group that was established backin 2009 to serve the Canadian wood processing indus-tries with industrial expertise and tailor-made solutionsfor high temperature process heating and c ombustionsystems, have been working in very close cooperationwith the end user but also with the ORC-technology sup-plier to develop the best competitive and advancedtechnical solution.
These firing and heater systems are the consequentcontinuation of the well proven and reliable reciprocat-ing grate technology and thermal oil heaters installedworld wide with leading plywood, particleboard, OSBand MDF-producers – now applied as “utility grade firingand heating stations”. The c hallenges have been nu-merous so to match with the requirements of both clientand grid owner. Under the bottom line thermal oil andORC-technology was chosen over the classic steam-cycle based power stations – a real breakthrough forthermal oil technology on nowadays power generation.
Learn more about this and many other new projectsof c lassen apparatebau Wiesloch GmbH when meetingthe “c lasseneers” at this year’s LIGNA.
7/17/2019 March April 2013
http://slidepdf.com/reader/full/march-april-2013-568e012b267c0 74/82
7/17/2019 March April 2013
http://slidepdf.com/reader/full/march-april-2013-568e012b267c0 75/82
74 MARCH/APRIL 2013 www.panelsfurnitureasia.com
SHOWPREVIEW PANELS & FURNITURE ASIA
Exhibitor Highlights
The HOMAG Group introduces visitors to a whole newworld of innovation at the LIGNA 2013: On show will be
patent registered new developments, model studiesshowcasing new process techniques and pioneer-ing new unit technology. The HOMAG Group will beunveiling 20 new units alone in the legendary Innova-tionCentre.
The HOMAG Group stands for plant engineering ex-pertise from a single mold – with individually networkedhigh-tech machines for the entire process chain. Thespectrum ranges from storage systems through c uttingand nesting, sizing and edge banding, order pickingand sorting to drilling, assembly, hardware mount-ing and packaging. Trade fair highlights include, forinstance, drilling and trimming machine ABH100 from
WEEKE. This machine is used forflexible 6-sided process-ing and is perfect for integration into an assembly line.Another highlight: The new LIGMATECH case clampMDE120. Sensitive case clamping is ensured by a newdrive technology and control system. This technologyalso results in significant savings and lower operat-ing costs. But whether you are looking for an edgebanding machine for flexible batch size 1 production,a saw or a CNC router: All HOMAG Group machinesare idea lly coordinated and interact perfectly like thepieces of a puzzle. The HOMAG Group’s engineeringexperts are able to design complete production lines
to suit individual needs – including the control system,software and complete handling and logistics systems.
The result: High-tech plants designed to meet the moststringent needs.
The complete product spectrum of machines for thewoodworking industry and woodworking shops includesa cohesive software range – all from a single source.With woodCAD| CAM, a tool is already available for3D planning which allows the automatic generationof production data. Software products provide supportin a variety of ways: woodWOP supports the program-
HOMAG
ming of CNC machines, while CutRite makes sure ofoptimised cutting plans. IT-Engineering supports the
complete production control of networked machines: The produc tion path is defined, orders are dividedinto batches, optimized and assigned to a stack. Allmachines are then supplied with the necessary orderdata. At the same time, files can be automaticallyidentified by barcode or RFID, alternative productionroutes taken into consideration or faulty parts ejected.
The software module MMR (Machine Monitoring & Re-porting) encompasses all production data which canthen be centrally logged in the of fice.
INDUSTRY highlights in Hall 26• Plant engineering expertise from a single mold
• Structural elements – a complete house from theHOMAG Group: Windows, doors, staircases, parquetand timber frame house
• The new powerTouch control generation• New BHC 912 dividing c enter from WEEKE• High-volume lightweight processing• Bespoke furniture production: From the perfect sur face to innovative packaging technology• Seamless mac hine, logistics and software solutions• Ef ficient window production• Banding inclined edges with processing center BAZ
700
• 5,000 sq.m. of wood industry expertise including 40machines and much more.
PRACTIVE highlights in Hall 11• Workshop c oncepts to meet every need• Zero joint technology for woodworking shops with
BRANDT airTec• World premiere: A new dimension in sanding technol- ogy with no-contact tracing from BÜTFERING• World premiere: WEEKE BHX 200 – Powerful drilling
performance – compact, vertical• Sawing-storage combination and Easy2Feed for
perfect handling• Machine, logistics and software woodCADICAM from
a single mold• World premiere: BMG 316 with gluing section in a 5-axis
trimming spindle• 1,500 sq.m. of wood industry expertise including 30
machines and much more.How can we expect tomorrow’s workshop to look?
The extensive PRACTIVE range from the HOMAG Groupopens up new perspectives for flexible production inthe woodworking shop sector – from attractive 3Droom planning software for the point of sale throughproduction to delivery.BARGS TEDT– new order picking in plant c ons truction.
7/17/2019 March April 2013
http://slidepdf.com/reader/full/march-april-2013-568e012b267c0 76/82
7www.panelsfurnitureasia.com MARCH/APRIL 2013
PANELS & FURNITURE ASIA SHOWPREVIEW
Exhibitor Highlight
Innovative PRACTIVE solutions for practically everyrequirement help this potential to be exploited to thefull. The growing c ustomer expectation of individualizedsolutions makes flexible production a must – startingwith material storage and handling systems. A saw,
for instance, can be upgraded with the integration ofa “Domino System” labeling and stacking concept ora nesting machine. And further downstream, sandingmachines, CNC processing centers, edge banderswith return conveyor and the patented laserTec pro-cess for zero joints all play their part in ensuring perfectworkpieces. Individual machines can be networked tocreate flexible production cells which allow joiners torespond rapidly to the requirements of tomorrow. Thedecisive factor here is an integral system of software.
Visit HOMAG at Hall 26 and Hall 11
Kuang Yung
Kuang Yung is proud to introduce its new wood
ripping solution for solid wood at LIGNA 2013. The mosteconomical laser scanning system in the world, theLaser Scan Multiple Rip Saw (MRS) System offers profitoptimisation by reduc ing labour and increasing yield.It is the top choice to maximise profit.
Visit Kuang Yung at Hall 12, Stand A06
The KFL 620
edge ba nding andcomb ination ma chine.
Visit NTL Chemicals at Hall 27, Stand 27
NTL Chemicals is a leading resin technology providerwith extensive experience and specialisation informaldehyde-based resins for the wood industry suchas PB, MDF, plywood, LVL, OSB, paper impregnation,etc.At LIGNA, NTL Chemicals will present its newdevelopments combined resin technology system forLow Emission Boards (E1, CARB-II, E-0 & Super E-O (F****)which has proven to be one of the most ef ficient and
cost- effective solutions for the wood panel industry. NTLwill also introduce other new developments such as:- Coloured MDF boards- Fire retardants - for PB and MDF- Formaldehyde - free adhesives
NTL Chemicals
Therefore, no matter what your wood pa nel resinrequirements are, know that NTL will have it covered.NTL Chemica l states: “If you don’t save… you don’t pay”
7/17/2019 March April 2013
http://slidepdf.com/reader/full/march-april-2013-568e012b267c0 77/82
76 MARCH/APRIL 2011
Flooring PANELS & FURNITURE ASIA
Anyone who works with wood – must cometo Germany.
One trip, two fairs
Visit two trade showson only one trip
interzum Cologne 2013
13 to 16 May
World’s leading event
for suppliers of furniture
production and interior
From Monday, 13 May 2013 to Thursday, 16 May 2013, the futurewill once again take shape in Cologne – at interzum.
Studies and product premieres, new materials, innovative
design and pioneering concepts: interzum is the event wheresuccess stories begin – and the furniture sector receives inspiration.The fair covers the following product groups: Materials & Nature: Wood, Veneers, Parquet flooring, Interior
works, Decorative surfaces, Decor papers, Laminates, wood- based panels, Laminated plastic, mineral materials, Edges,
surface treatments, Adhesives, Embossing cylinders, Pressplates
Function & Components: Semi-finished products for cabinet,kitchen, of fice and modular furniture, Fittings, Locks, Built-inparts, Lamps and lighting systems
Textile & Machinery: Machinery for upholstery and bedding,Upholstery materials, Upholstery accessories, Cover fabrics,Leather
Every two years, wood and furniture specialistsfrom around the world come to Germany to
attend the most important trade fairs for their
industry: LIGNA in Hannover and interzum
in Cologne. The two fairs are staged in quick
succession so that international visitors can
attend both in a single trip. 2013 will be no
different. Together, LIGNA and interzum will once
again provide a comprehensive overview of the
materials, design solutions and technologies
currently available for the woodworking, wood
processing and furniture industries.LIGNA and interzum are the world’s foremost
trade fairs in their respective sectors. Together,
they cover a very broad spectrum of exhibition
topics, ranging from wood as a renewable material
to wood working and processing technology to
components for the furniture and interior finishing
sectors. For visitors from abroad, the timing of the
two fairs is ideal because it enables them to take
in both events in a single trip – which is eminently
feasible, given that the host cities, Cologne and
Hannover, are only 300 kilometers apart by roador two and a half hours by rail.
7/17/2019 March April 2013
http://slidepdf.com/reader/full/march-april-2013-568e012b267c0 78/82
7MARCH/APRIL 2011
PANELS & FURNITURE ASIA FlooringLIGNA HANNOVER 2013
06 to 10 May
Making more out of wood
– technology for resource
ef fi ciency
LIGNA HANNOVER, the leading international trade show for the
woodworking and wood processing industries, embraces the entire
production chain – from forestry and the timber trade through to
industrial mass production of wood products and surface treatment
technology. In short, LIGNA HANNOVER is the interface to every
area of woodworking!
Keynote displays at LIGNA HANNOVER:
Forestry (management and technology)
Bioenergy from wood
Sawmill equipment and technology
Solid wood working
Wood materials and veneer production Handwerk, Holz und mehr: Joinery, cabinet-making and car-
pentry trades, engineered woods, materials, accessories and
services
Furniture industry
Surfaces technologies and Lightweight construction
Numerous special presentations dedicated to practical themes,
informative seminars and conferences, as well as matchmaking
and B2B meetings and congresses underline the significance of
LIGNA HANNOVER as the trade’s international summit.
Our offer: buy one, get one for free
Just buy one ticket for either LIGNA or interzum and get access
to LIGNA and interzum!
Please order your Day Ticket or your Full-Event Tickey;
Go to Ticket Shop LIGNA: www.ligna.de/en/tickets
Go to Ticket Shop interzum: www.interzum.com/tickets
Deutsche Messe
Tel: +49 511 89-0
Fax +49 511 89 32626
Koelnmesse GmbH
Tel. +49 1805 077 050
Fax +49 221 821 99 1210
7/17/2019 March April 2013
http://slidepdf.com/reader/full/march-april-2013-568e012b267c0 79/82
78 MARCH/APRIL 2013 www.panelsfurnitureasia.com
EVENTSEVENTS
C LEND RCALENDAR2 32013
12-J an 15-J an Domotex Hannover
14-Jan 20-J an imm Cologne Cologne
17-Jan 20-Jan ZOW Istanbul Istanbul
28-Jan 31-Jan SURFACES Las Vegas
29-Jan 2-Feb IMOB 2013 Istanbul
31-Jan 3-Feb DelhiWood 2013 Delhi
18-Feb 21-Feb ZOW Bad Salzuflen Bad Salzufen
5-Mar 8-Mar Woodmac China Shanghai
5-Mar 9-Mar MIFF Kuala Lumpur
6-Mar 10-Mar EFE Selangor
7-Mar 10-Mar Build+Décor Beijing
9-Mar 12-Mar IFFS / AFS 2013 Singapore11-Mar 14-Mar IFFINA Jakarta
11-Mar 14-Mar VIFA 2013 Saigon
13-Mar 17-Mar TIFF 2013 Bangkok
17-Mar 20-Mar The Big Show Muscat
26-Mar 28-Mar Domotex Asia/ChinaFloor Shanghai
27-Mar 30-Mar Interzum Guangzhou Guangzhou
9-Apr 11-Apr Dubai Woodshow Dubai
6-May 9-May Project Qatar Doha
6-May 10-May LIGNA Hannover
7-May 9-May gulf BID Manama
13-May 16-May interzum Cologne Cologne
20-May 23-May INDEX Dubai Dubai
23-May 25-May IFMAC Jakarta
6-J un 9-J un China Furniture & Woodworks Dalian
13-J un 16-Jun Wood Tech India Mumbia
20-J un 22-Jun Furnitech Woodtech Bangkok
21-Aug 24-Aug Aseanwood Woodtech Kuala Lumpur
11-Sep 14-Sep FMC Shanghai Shanghai
13-Sep 16-Sep Southeast Asia Furniture &Interiors Import-Export Exhibition (SEAFIE) Kuala Lumpur
25-Sep 28-Sep VietnamWood Ho Chi Minh
2-Oct 4-Oct NHLA Convention Texas
5-Oct 9-Oct Intermob Turkey Istanbul
8-Nov 11-Nov DOMOTEX Middle East Istanbul
11-Nov 14-Nov Indonesia Woodshow Jakarta
14-Nov 17-Nov Index Mumbai
15-Nov 18-Nov MyanmarWood Yangon
25-Nov 28-Nov The Big 5 Show Dubai
ANUARY Start Date End Date Event City
EBRUARY
MARCH
APRIL
MAY
UNE
AUGUST
SEPTEMBER
OCTOBER
NOVEMBER
7/17/2019 March April 2013
http://slidepdf.com/reader/full/march-april-2013-568e012b267c0 80/82
7www.panelsfurnitureasia.com MARCH/APRIL 2013
If you would like to add your event to our
calendar, please contact Ms. Denice Cabel([email protected]).
Germany Deutsche Messe AG www.domotex.de
Germany Koelnmesse GmbH www.imm-cologne.de
Turkey Clarion SURVEY GmbH www.zow.com.tr
USA Hanley Wood LLC www.surfaces.com
Turkey ITE Turkey www.itf-imob.com
India PDA Trade Fairs www.delhi-wood.com
Germany Clarion SURVEY GmbH www.zow.de
China Deutsche Messe www.woodmacchina.net
Malaysia United Business Media (M) Sdn Bhd www.miff.com.my
Malaysia EFE Expo Sdn Bhd www.efe.net.my
China China B & D Exhibition Co. Ltd. www.builddecor.com
Singapore International Furniture Fair Singapore Pte Ltd www.iffs.com.sgIndonesia PT. Kerabat Dyan Utama (Radyatama) www.if fina-indonesia.com
Vietnam Handicraft & Wood Industry Association of HCMC www.vifafair.com
Thailand Royal Thai Government, Of fice of ExportPromotion Activities www.thailandfurniturefair.com
Oman Omanexpo www.thebigshow-oman.com
China Deutsche Messe AG www.domotexasiachinafloor.com
China Koelnmesse Pte Ltd www.interzum-guangzhou.com
UAE Strategic Marketing & Exhibitions www.dubaiwoodshow.com
Qatar IFP Group www.projectqatar.com
Germany Deutsche Messe www.ligna.de
Bahrain Hilal Conferences and Exhibitions www.gulfbidexhibition.com
Germany Koelnmesse www.interzum.com
UAE dmg :: events www.indexexhibition.com
Indonesia Wakeni Kaigo www.ifmac.net
China Dalian Northern Int’l Exhibitions Limited Company www.sinoexhibition.com
India Business LIV www.woodtechindia.in
Thailand Reed Tradex www.furnitechwoodtech.com
Malaysia Trade-Link Management Services Sdn Bhd tradelink.com.my/woodtech
China Shanghai UBM Sinoexpo International Exhibition Co., Ltd www.fmcchina.com.cn
Malaysia UBM www.seafie.com
Vietnam Chan Chao International Co., Ltd www.vietnamwoodexpo.com
USA National Hardwood Lumber Association www.nhla.com/convention
Turkey TÜYAP Fair Convention and Congress Centre www.intermobistanbul.com
Turkey Deutsche Messe www.domotex-middle-east.com
Indonesia Strategic www.indonesiawoodshow.com
India Index Trade Fairs www.indexfairs.com
Myanmar Yorkers Trade & Marketing Service Co., Ltd www.myanmar-expo.com
UAE dmg events www.thebig5.ae
Country Organiser Website
7/17/2019 March April 2013
http://slidepdf.com/reader/full/march-april-2013-568e012b267c0 81/82
7/17/2019 March April 2013
http://slidepdf.com/reader/full/march-april-2013-568e012b267c0 82/82