marine catalog - flow-rite catalog second edition ... rear mv-04-rn01 www xow-ritecom 1-583-1....
TRANSCRIPT
Marine CatalogSecond Edition
Company Information ����������������������������� 3
Valves, Actuators and Cable �������������������� 5
Aerators ����������������������������������������������� 11
3/4” Fittings ����������������������������������������� 17
1-1/8” Fittings �������������������������������������� 25
Accessories ������������������������������������������� 31
Parts & Hardware ��������������������������������� 35
Table of Contents
03/152 www.flow-rite.com 616-583-1700
Company Information �������������������������������������������������������������������������������������������������� 3Our Team ........................................................................................................................................... 3Our Promise of Quality ...................................................................................................................... 4Sales Policies ...................................................................................................................................... 4
Valves, Actuators and Cable ����������������������������������������������������������������������������������������� 5Valves Overview ................................................................................................................................ 6Valve Positions ................................................................................................................................... 8Valve Features ................................................................................................................................... 9Actuators ......................................................................................................................................... 10Control Cables ................................................................................................................................. 10
Aerators ���������������������������������������������������������������������������������������������������������������������11PowerStream Aerator ...................................................................................................................... 12PowerStream Nozzle ....................................................................................................................... 13Pump-Out Aerator ........................................................................................................................... 14Power-Jet Aerator ............................................................................................................................ 15Spray Head Aerators ........................................................................................................................ 16
3/4” Fittings ���������������������������������������������������������������������������������������������������������������17Qwik-Lok Sockets ............................................................................................................................. 18Thru-Hull Fittings ............................................................................................................................. 18Connectors and Adaptors ................................................................................................................ 19Drain Fittings ................................................................................................................................... 22Drain Screens and Plugs .................................................................................................................. 23
1-1/8” Fittings ������������������������������������������������������������������������������������������������������������25Qwik-Lok Sockets ............................................................................................................................. 26Thru-Hull Fittings ............................................................................................................................. 26Drain Screens, Plugs and Standpipes ............................................................................................... 29
Accessories �����������������������������������������������������������������������������������������������������������������31ProTimer & ProTimer Plus+ ............................................................................................................ 32Remote Drain Plug ........................................................................................................................... 33Livewell / Cooler Conversion Kit ...................................................................................................... 34Vortex .............................................................................................................................................. 34
Parts & Hardware �������������������������������������������������������������������������������������������������������35Mounting Brackets .......................................................................................................................... 36Air Tubing and Accessories .............................................................................................................. 36Labels & Decals ................................................................................................................................ 36Replacement Parts........................................................................................................................... 37Hose and Qwik-Lok Assembly Components .................................................................................... 38Miscellaneous Parts ......................................................................................................................... 39
www.flow-rite.com 616-583-1700
Company Information
Flow-Rite
Ashley TobinSales and Business Development
[email protected] 616-277-5131cell 616-581-4816
Tim PitcherSales & Service
[email protected] 616-277-5139cell 616-560-9206
Todd CowanProject Engineer
Certified Marine [email protected] 616-277-5130cell 616-318-9682
Flow-Rite Controls960 74th Street SW
Byron Center, MI 49315p. (616) 583-1700 f. (616) 878-5151
www.flow-rite.com
03/153www.flow-rite.com 616-583-1700
Our Team
Flow-Rite
Comp
any I
nfor
matio
n
ISO 9001:2008 CERTIFIE
D
FLOW
-RITE CONTROLS
03/154 www.flow-rite.com 616-583-1700
Flow-Rite Controls, Ltd. is committed to offering the best performing, highest quality products in each market we service. We promise our customers that we will continue to improve the quality of our existing products, as we continue our effort to expand our business into new markets. We, at Flow-Rite Controls, Ltd., affirm this commitment and have established a comprehensive quality assurance system that allows our company to meet all of the requirements of the ISO 9001:2008 quality assurance standard. Further, we are audited on a semiannual basis and reissued a new certification every three years.
Our Promise of Quality
Sales PoliciesPayment Terms:Cash in advance, C.O.D., Visa, Mastercard, Discover or Net 30 days for companies with approved credit. Any account with outstanding balances older than 15 days past the invoice date will be placed on credit hold.
Freight Terms:F.O.B. Flow-Rite Controls, Byron Center, MI.
Shipping Policy:All orders placed that contain valves or other nonstocked items are built to order and have typical lead times of 3-5 business days. Actual lead times vary based on order volume, for specific lead time contact factory. Stock items will be shipped same day if the order is received before 11:30 AM (Eastern Time).
Return Policy:Contact Flow-Rite Controls to obtain a Return Goods Authorization Number (RGA). Any package that is returned without an RGA number will be refused. Returns are subject to a 15% Restocking Fee.
1 Year Limited Warranty for Marine ProductsFlow-Rite Controls warrants to Purchaser that its product, will be free of all defects in material and workmanship for one (1) year after the date of purchase. If within one year of the date of purchase, the marine product, fails to perform due to a manufacturing defect, Flow-Rite Controls will repair or replace the product, free of charge. A Return Authorization Number must be obtained from Flow-Rite Controls (through your supplier) prior to returning product for warranty consideration. Purchaser must send any product covered under this warranty, along with a copy of supplier’s invoice and description of the problem to: Flow-Rite Controls, 960 74th St SW, Byron Center, MI 49315.
Va
lves
Valves
5www.flow-rite.com 616-583-1700
Va
lves
Valves
03/156
V1 Two-Position Shut Off Valve [OPEN / CLOSED]
V2 Two-Position Automatic Valve [EMPTY / AUTO]
V3 Three-Position Automatic Valve [RECIRC / EMPTY / AUTO]
• Remote drain control for any boat’s livewell, baitwell or cooler
• Provides OPEN / CLOSED modes• Operates with the MC-1-01-100
actuator
• Ideally used in bassboats, flats boats, and other low profile boats for automatic drain control and livewell management
• Accepts mounting of one standard aerator pump for both filling and recirculation• Provides EMPTY / AUTO modes• Operates with the MC-1-02-100 actuator
• Ideally used in bassboats, flats boats, and other low profile boats for automatic drain control and livewell management
• Accepts mounting of one standard aerator pump for both filling and recirculation• Includes closed recirculation mode which allows addition of optional pump-out
system• Provides RECIRC / EMPTY / AUTO modes• Operates with the MC-1-03-100 actuator
Below is a brief overview of the Flow-Rite valves. Note: Some components of a complete livewell system, such as overflows, have been omitted for clarity.
Cable Direction Non-PEF PEF
Qwik-Lok Front MV-12-FN01 MV-12-FP01Rear MV-12-RN01 MV-12-RP01
Barbed Front MV-02-FN01 MV-02-FP01Rear MV-02-RN01 MV-02-RP01
Cable Direction 3/4” 1-1/8”
Qwik-Lok N/A MV-11-FN01 MV-5A-FN01Barbed N/A MV-01-FN01 N/A
Cable Direction Non-PEF PEF
Qwik-Lok Front MV-13-FN01 MV-13-FP01Rear MV-13-RN01 MV-13-RP01
Barbed Front MV-03-FN01 MV-03-FP01Rear MV-03-RN01 MV-03-RP01
• 1-1/8” Shut off valves are commonly used to provide control for ballast systems, open and closed modes
www.flow-rite.com 616-583-1700
Valves Overview
www.flow-rite.com 616-583-1700
Va
lves
Valves
03/157
V4 Three-Position Select Valve [FILL / EMPTY / RECIRC]• Ideally used in walleye boats or other high profile boats for drain control and livewell
management• Accepts mounting of one standard aerator pump for both filling and recirculation• Includes closed recirculation mode which allows addition of optional pump-out
system• Provides FILL / EMPTY / RECIRC modes• Operates with the MC-1-04-100 actuator
V5 Two-Position Pump Out Valve [RECIRC / PUMP-OUT]
Three-Position Ballast Valve [STBD / BOTH / PORT]
• Used in addition to V3, V4, or any recirculation pump (as shown here) to provide optional pump-out. (See also POA Pump-Out Aerator for alternative method)
• Provides RECIRC / PUMP-OUT modes• Operates with the MC-1-05-100 actuator
• Provides control for ballast systems, port starboard or both modes• Can eliminate number of pumps required• Works with positive displacement as well as centrifugal pumps• 1 1/8” port sizes for high flow rate• Compatible with MA-040 & MA-049 Qwik-Lok hose sockets• Operates with MC-1-0B-100 actuator
Cable Direction
Qwik-Lok Front MV-5A-FN01Rear MV-5A-RN01
Cable Direction Straight Elbow
Qwik-Lok Front MV-15-FN11 N/ARear MV-15-RN11 N/A
Barbed Front MV-05-FN11 MV-05-FN21Rear MV-05-RN11 MV-05-RN21
Cable Direction
Qwik-Lok Front MV-14-FN01Rear MV-14-RN01
Barbed Front MV-04-FN01Rear MV-04-RN01
www.flow-rite.com 616-583-1700
Va
lves
Valves
03/158
OPEN
In the OPEN position, the valve is wide open and water will flow freely in either direction.
EMPTY
In the EMPTY position of systems 2 & 3, water is allowed to exit the livewell drain, but is not allowed to enter. For system 4, EMPTY allows water to pass in either direction.
RECIRC
In the RECIRC position, the pump receives water from the livewell only. Outside water is blocked.
CLOSED
In the CLOSED position, the valve is shut off on both sides and water is not allowed to pass in either direction.
FILL
In the FILL position, the pump receives outside water only.
AUTO
When on plane, the AUTO position allows water to enter the valve and pump from both outside and from the livewell. When on plane, the outside port is closed to prevent water loss and livewell water continues to enter the valve and pump for recirculation.
In the PUMP OUT position, livewell water is pumped out of the boat.
PUMP OUT
The ballast valve directs water to either the port side, the starboard side or both.
PORTBOTH
STBD
www.flow-rite.com 616-583-1700
Valve Positions
www.flow-rite.com 616-583-1700
Va
lves
Valves
03/159
Front Approach Rear Approach
Only specify PEF for higher profile walleye and bay boats where the livewell overflow is 8”-12” above lake level. If it’s more than 12”, use the V4 valve. PEF is not generally required for low profile bass boats.
While off plane and in the AUTO position, water enters the valve from both the livewell drain and the transom thru-hull. As the water level in the livewell increases, so does the pressure on the transom check feature of the valve, reducing the ratio of fresh to recirculated water. When this pressure is too great, PEF insures that enough fresh water is added to force the upper used water out.
Insert the cable “Z” bend from the valve cap side and position the clamp directly behind the enlarged section of cable jacket as shown.
The valve body is threaded for mounting the inlet of a centrifugal pump. Use a hacksaw to remove all but about 1-1/4” to 1-1/2” of threads on the pump inlet. Apply Teflon tape and mount directly to valve. A 700 to 800 GPH pump is recommended for best performance.
Mounting a Pump to the ValveDimensions
Installing the Cable Actuator
Cable Approach
Attaching the Cable to the Valve
P.E.F. (Pressure Equalization Flapper)
Insert cable wire through hole in brass arm as shown. Then, position cable assembly into brass bracket U-slot and secure finger tight with knurled nut. Carefully push assembly into 1-3/4” mounting hole and secure with two P/N MD-093 screws (#6-32, truss head, black oxide, stainless steel).
Some valves have two cable approach options. The cable can approach the valve from either the front/livewell side or the rear/transom side of the boat.
360º PLUS360º PLUS360º Plus FeatureThe V5 and ballast valves with Qwik-Lok include a straight Qwik-Lok male adapter at the valve body inlet. This allows a Qwik-Lok hose section from the pump to be connected from any direction and have freedom to swivel and relax.
4 3/4"
2 5/
8"
2 1/4
"
4 3/4"
2 5/
8"
3"
V1 V2-V5
www.flow-rite.com 616-583-1700
Valve Features
Va
lves
Valves
03/1510
• OPEN• CLOSED• For use with V1
series valves
• FILL• EMPTY• RECIRC• For use with V4
series valves
• EMPTY• AUTO• For use with V2
series valves
• RECIRC• PUMP OUT• For use with V5
series valves
• STBD• BOTH• PORT• For use with Ballast
valves
• RECIRC• EMPTY• AUTO• For use with V3
series valves
System 1 Actuator System 4 Actuator
System 2 Actuator System 5 Actuator
Ballast ActuatorSystem 3 Actuator
The actuators have a quick disconnect feature that allows easy changing without having to remove the cable. It also has an ergonomically designed “T” handle with a comfortable rubberized over-molding and a light gathering indicator. (Locking nut assures a secure mounting while requiring no tools.)
Control Cable Part #Cable LengthMA-CBL-066 footMA-CBL-077 footMA-CBL-088 footMA-CBL-099 footMA-CBL-1010 footMA-CBL-1111 foot
Part #Cable LengthMA-CBL-1212 footMA-CBL-1313 footMA-CBL-1414 footMA-CBL-1515 footMA-CBL-1616 footMA-CBL-1717 foot
System 1 Actuator MC-1-01-100 System 4 Actuator MC-1-04-100
System 2 Actuator MC-1-02-100 System 5 Actuator MC-1-05-100
Ballast Actuator MC-1-0B-100System 3 Actuator MC-1-03-100
www.flow-rite.com 616-583-1700
Actuators
Control Cables
Aera
tors
Aerators
11www.flow-rite.com 616-583-1700
Aer
ato
rs
Aerators
03/1512
The PowerStream Aerator features a patented venturi air intake at the top of the discharge head to maximize the oxygen entering the livewell water. The mixing tube injects this mixture directly to the depths of the livewell through the adjustable discharge nozzle at the bottom of the tube. Since the thru-hull fitting and venturi intake are mounted above the livewell water line, it can be used with either a transom mounted fill pump or a livewell mounted recirculation pump without worry of water being siphoned out when the pump is off.
PowerStream Aerator
*Optional Aerator GuardMA-108
4"
(see
cha
rt fo
r ava
ilabl
e le
ngth
s)7/8"
1/2"
2"
2"
Qwik-LokPart #
BarbedPart #Length
PowerStream Aerator w/Thru-hull, Standard MH-PSA-209 MH-PSA-1099”PowerStream Aerator w/Thru-hull, Long MH-PSA-215 MH-PSA-11515”PowerStream Aerator w/Thru-hull, Extra Long MH-PSA-222 MH-PSA-12222”
Venturi Air-IntakePatented design forces air to turbulently mix with water.
Locking NutSecures aerator to thru-hull and allows a swivel motion if bumped by large �sh.
Discharge PortRotates 360 degrees to circulate the water in the livewell with fresh oxygen rich water.
Mixing TubeInfuses oxygen rich air into the water before entering the livewell.
360º
www.flow-rite.com 616-583-1700
www.flow-rite.com 616-583-1700
Aera
tors
Aerators
03/1513
The PowerStream Nozzle features a patented vanturi air intake that maximizes livewell oxygen levels by infusing the incoming water with fresh air. Unlike typical overhead spray heads, oxygen rich water immediately penetrates the deepest livewells with ease and can be rotated left or right for a circular current of the livewell water. A special elbow thru-hull fitting is included.
Venturi Air-IntakeAllows air to be brought in and mixed with water
Locking NutLeave aproximately 3/16” of threads on thru-hull exposed for locking nut
Discharge NozzleCan be rotated to provide circula-tion in the livewell
Nozzle may be rotated left or right to promote livewell water circulation
PowerStream Nozzle
4"
2"
1/2"
7/8"
2"
Qwik-LokPart #
BarbedPart #
PowerStream Nozzle w/Thru-hull MH-PSN-200 MH-PSN-100
www.flow-rite.com 616-583-1700
Aer
ato
rs
Aerators
03/1514
A pump-out feature provides a convenient means of filling a tournament livewell weigh-in bag and also enables a livewell to be pumped out while the boat is still in the water or when moored at a dock overnight.
The Flow-Rite Pump-Out Aerator is the easiest, most efficient, and least expensive means of adding a pump-out system to any livewell system. It eliminates the need for additional diverting valves, cables, actuators, electrical connections and most of the plumbing required by other systems. Simply install the Pump-Out Aerator in place of the standard spray head used with any recirculation pump or with any of our V3 or V4 control valves that include a “RECIRC” mode. It has two hose connections, one intake from the pump and one outlet for the discharge hose that will connect to the new discharge thru-hull fitting.
The two position head is pushed in to bring water into the livewell where it is recirculated and aerated by the air intake and venturi built into the head. Pull the head to the out or “pump-out” position to divert the water from the livewell to the discharge thru-hull. The head can also be rotated left or right to promote a desirable circular current within the livewell. The venturi will ensure that the maximum amount of oxygen allowed by ambient conditions will be provided to all levels and areas of the livewell.
Aerator HeadSimply pull to pump-out and push to aerate
Pump-out PortConnects to pump-out thru-hull
Intake PortConnects to recirc pump
Venturi Air-IntakeAllows air to be brought in and mixed with water
Locking NutLeave aproximately 3/16” of threads on thru-hull exposed for locking nut
Discharge NozzleCan be rotated to provide circulation in the livewell
Pump-Out Aerator
5 3/4"
2 7/
8"
1"
1/2"
2 5/8"
2"
A special thru-hull fitting is available for use with the
Pump-out Aerator. MA-020-B (barbed) and MA-020-QLB
(Qwik-Lok)
Qwik-LokPart #
BarbedPart #
Pump-Out Aerator MA-024-QLR MA-024-RPump-Out Aerator Retail Pack (includes thru-hull and instructions) N/A MP-1000Discharge Straight Thru-hull (with decal) MA-020-QLB MA-020-BDischarge Elbow Thru-hull (without decal) MA-027-QLB MA-027-B
www.flow-rite.com 616-583-1700
www.flow-rite.com 616-583-1700
Aera
tors
Aerators
03/1515
FLO
W-RITE
Pow
er-Jet Air In
take
Pow
er-Jet Air In
take
FLO
W-RITE
MD-DCL-016-W
The Power-Jet aerator is designed to be mounted well below the surface of the livewell for direct introduction of fresh oxygenated water. It can be used with systems 2, 3, or 4, or a livewell mounted aerator pump only. (It is not for use with a transom mounted pump.) Includes a special air intake fitting with gasket and nut.
Air Intake TubingEasily routed and may be cut to lenth to suit speci�c needs.
Remote Venturi IntakeVenturi air intake has many mounting options and can be mounted anywhere above water level. Shown here with optional domed decal.
Discharge NozzleShould be mounted near a corner to promote livewell water circulation.
Power-Jet Aerator
Qwik-LokPart #
BarbedPart #
PJA w/Air Intake Assy (no decal, no air tubing) MH-PJA-200 MH-PJA-100PJA w/Air Intake Assy & 20" Air tubing (no decal) MH-PJA-220 MH-PJA-120Air Tubing, 3/16" I.D. (sold by foot) MD-055Domed Decal, Single White Lettering MD-DCL-016-WDomed Decal, Double White Lettering MD-DCL-017-W
3"
2 7/
8"
1 3/4"1/2"
2"
1 3/8"5/
8"
3/4"
1/4"
MD-DCL-017-W
www.flow-rite.com 616-583-1700
Aer
ato
rs
Aerators
03/1516
Spray head, Straight
Spray Head, Elbow
• Spray head may be rotated to promote livewell water circulation
• Spray head may be rotated to promote livewell water circulation
3 7/8"
5/8"1 3/4"
2"
1/2"
3 1/4"
5/8"1"
2 7/
8"
2"
Qwik-LokPart #
BarbedPart #
Spray Head, Straight MA-071-QLW MA-071-W
Qwik-LokPart #
BarbedPart #
Spray Head, Elbow MA-077-QLW MA-077-W
Spray Head Aerators
Spray Head with Shut-off • Fully adjustable from off to fully open
• Ideal for use with single fill pump routed to two or more bait or livewells
• Not for use with V2 or V3 automatic system
4 1/4"
2 3/
8" 1 5
/8"
CLOSE - OPEN
Qwik-LokPart #
BarbedPart #
Spray Head with Shut-off MA-051-QLW MA-051-W
www.flow-rite.com 616-583-1700
3/4
” Fittin
gs
3/4” Fittings
17www.flow-rite.com 616-583-1700
3/4
” F
itti
ng
s
3/4” Fittings
03/1518
Qwik-Lok Sockets
Qwik-Lok Socket, Straight
Qwik-Lok Socket, Elbow
Thru-Hull Fittings
1.03
1.60
2.38
2.37
0.88
2.66
Latching Arm
Clamp
Locking Ring
Hose Stop
Raised Rib
3/4” Hose
• Ideal for situations where a short hose is required, using one straight socket and one elbow socket
Straight Flanged Thru-Hulls
Qwik-Lok BarbedBlack MA-011-QLB MA-011-BWhite MA-011-QLW MA-011-WChrome MA-016-QL MA-016-B
3 1/8"
2"
1 3/4"
1/2"
• Compatible with MA-018 Snap-in Strainer except for chrome thru-hulls
• Requires 1-1/16” mounting hole• Chrome plated ABS bezels securely snap in place
Qwik-Lok Socket, Straight MA-014
Qwik-Lok Socket, Elbow MA-025
www.flow-rite.com 616-583-1700
www.flow-rite.com 616-583-1700
3/4
” Fittin
gs
3/4” Fittings
03/1519
Elbow Flanged Thru-Hulls
Elbow Double Nut Thru-Hulls
• Compatible with MA-018 Snap-in Strainer except for chrome thru-hulls
• Requires 1-1/16” mounting hole• Chrome plated ABS bezels securely snap in place
• Compatible with MA-018 Snap-in Strainer except for chrome thru-hulls
• Requires 1-1/16” mounting hole• Chrome plated ABS bezels securely snap in place
Qwik-Lok BarbedBlack MA-027-QLB MA-027-BWhite MA-027-QLW MA-027-WChrome MA-028-QL MA-028-B
2 5/
8"
2 7/8"2"
1/2" 1"
1/4"
2"
2 1/4
"
2 3/4"
1/2"
1 3/4"
Qwik-Lok BarbedBlack MA-007-QLB MA-007-BWhite MA-007-QLW MA-007-W
Qwik-Lok Tee
Connectors and Adaptors
3 5/8"
2 1/4
"
• Combined with MA-014 and/or MA-025 sockets, the tee is very versatile, offering numerous configurations
Qwik-Lok Tee MA-026-QLB
www.flow-rite.com 616-583-1700
3/4
” F
itti
ng
s
3/4” Fittings
03/1520
2 1/8"
1 3/8
"
2"
1 1/8
"
2"
1 1/4
"
2 1/8"
7/8
"2"
1 1/8
"
3/4” QL X 3/4” NSPF
3/4” QL X Garden Hose Thread
3/4” QL X 3/4” NPT
3/4” QL X 1/2” NPT
3/4” QL X 3/4” Barb
3/4” QL X Female Thread for Rule® Pumps2 1/4"
1 1/4
"
• Fits Attwood pump intake and outlet threads
• Fits most pump inlets for remote mounting of pump
• Will also fit Johnson Pump outlet when an extra gasket is used
• Primarily used on some ballast bags requiring garden hose threads
• Primarily used in body of Flow-Rite control valves when pump is mounted remotely and for use on V5 Pump-out valves
• Primarily used on second inlet of Rule Tournament Series and other pumps for the feed to a separate washdown pump
• Used to provide a quick disconnect from an existing 3/4” hose or a transition from barbed to Qwik-Lok
• Used exclusively for the outlet of Rule Tournament Series pumps to adapt to Qwik-Lok
3/4” QL X 3/4” NSPF MA-021
3/4” QL X 3/4” NPT MA-029
3/4” QL X 1/2” NPT MA-035
3/4” QL X 3/4” Barbed MA-035
3/4” QL X Female Thread for Rule® Pumps MA-037
3/4” QL X Garden Hose Thread MA-031
www.flow-rite.com 616-583-1700
www.flow-rite.com 616-583-1700
3/4
” Fittin
gs
3/4” Fittings
03/1521
Adaptor, 3/4” Barb X 3/4” NPT
Qwik-Lok Adaptor for Attwood®
Adaptor, 3/4” Barb Elbow X 3/4” NPT
1 5/8"
1 1/4
"
2"
2"
• Used on barbed versions of the V5 pump-out valve body for intake from a recirculation pump.
• Qwik-Lok adapter for
Attwood® pumps.
• Used on barbed versions of the V5 pump-out valve body for intake from a recirculation pump.
Qwik-Lok Adaptor for Attwood® MA-034
Adaptor, 3/4” Barb X 3/4” NPT MA-041
Adaptor, 3/4” Barb Elbow X 3/4” NPT MA-042
1-1/2”"
2-5/
8”
www.flow-rite.com 616-583-1700
3/4
” F
itti
ng
s
3/4” Fittings
03/1522
Low Profile Drain Fitting with Strainer
Includes strainer
3 3/4"
5/8
" 2 1/2
"
1"
1/2"
• Requires 1-1/16” mounting hole Qwik-Lok BarbedBlack MA-076-QLB N/AWhite MA-076-QLW N/A
Drain Fittings
Threaded Port Drain Fittings
Open Port Drain Fittings
• Requires 1-1/16” mounting hole• Compatible with MA-022 drain plug
• Requires 1-1/16” mounting hole• Compatible with MA-005 or MA-023 strainers
2 7/
8"
2 7/8"1 3/4"
1/16
"
1"
1/2"
1/8"
2 7/
8" 1" 1/2
"
1/8"
1/16
"
2"
2 1/2
"
2 7/8"1 3/4"
1/16
"
1"
1/2"
1/8"
2 7/
8" 1" 1/2
"
1/8"
1/16
"
1.75"
Qwik-Lok BarbedStraight MA-188-QLB N/AElbow MA-187-QLB N/A
Qwik-Lok BarbedStraight MA-075-QLB N/AElbow MA-074-QLB N/A
www.flow-rite.com 616-583-1700
www.flow-rite.com 616-583-1700
3/4
” Fittin
gs
3/4” Fittings
03/1523
Drain Screens and Plugs
Snap-in Strainer, Stainless Steel
2"
2 3/8"
1/4"
1 1/4
"
• Stainless Steel Screen• Compatible with MA-027 and
MA-011 series fittings.
Snap-in Strainer, Small, Stainless Steel• Stainless Steel Screen• Compatible with MA-027 and
MA-011 series fittings.
2"
1-3/4"
1/2"1-
1/4"
1 3/4"
1"
1/4"
• Stainless Steel Screen• Compatible with MA-007
series fittings.
• Stainless Steel Screen• Compatible with MA-007
series fittings.
2-1/4"
1-3/
8"
3/8
"
Screw-on Strainer, Small, Stainless Steel
Screw-on Strainer, Stainless Steel
1 5/8
"
1"
7/8
"
Drain Plug
• Compatible with MA-027 and MA-011 series fittings.
Snap-in Strainer MA-018
Snap-in Strainer, Small MA-019
Screw-on Strainer MA-023
Screw-on Strainer, Small MA-005
Push-in Drain Plug MA-022
www.flow-rite.com 616-583-1700
1-1/8” F
itting
s
1-1/8” Fittings
25
1-1/
8”
Fit
tin
gs
1-1/8” Fittings
03/1526
Qwik-Lok Sockets
Thru-Hull Fittings
Qwik-Lok Socket, Straight
Qwik-Lok Socket, Elbow
• Requires 1-1/2” mounting hole• Requires MA-040 or MA-049 Qwik-Lok socket.• Compatible with MA-045 push-in drain plug and MA-046
push-in strainer (excluding MA-063 chrome thru-hull)• Chrome plated ABS bezels securely snap in place
(replacement bezel MA-066)
3 1/8"
2 1/4"
1 5/8"
1/2"
2"
2 3/
8"
1"
3 1/8"
2 7/
8"
1"
Latching Arm
Clamp
Locking Ring
Hose Stop
Raised Rib
1-1/8”” Hose
• Elbow socket allows for easy plumbing in tight situations
Straight, Flanged Thru-Hulls
Qwik-LokBlack MA-041-QLBWhite MA-041-QLWChrome MA-063-QLB
Qwik-Lok Socket MA-040Qwik-Lok Socket for 1” Hose (coming soon)
TBD
Qwik-Lok Socket, Elbow MA-049
www.flow-rite.com 616-583-1700
www.flow-rite.com 616-583-1700
1-1/8” F
itting
s
1-1/8” Fittings
03/1527
• Requires 1-1/2” mounting hole• Requires MA-040 or MA-049 Qwik-Lok socket• Compatible with MA-045 push-in drain plug and MA-046
push-in strainer (excluding MA-064 chrome thru-hull)• Chrome plated ABS bezels securely snap in place
(replacement bezel MA-066)
• Requires 1-1/2” mounting hole• Requires MA-040 or MA-049 Qwik-Lok socket• Compatible with MA-STDP-12 standpipe & MA-050 screw-in
drain plug
2 3/4"
7/8"
1/2"
3 1/4"2 1/4"
Elbow, Flanged Thru-Hulls
Threaded (internal), Flanged Thru-Hulls
Qwik-LokBlack MA-042-QLBWhite MA-042-QLWChrome MA-064-QL
Qwik-LokStraight MA-043-QLBElbow MA-044-QLB
Qwik-LokElbow MA-048-QLB
3 1/8
"
2 1/4"
1 5/8
"1/2"
2 3/4"
7/8"
1/2"
3 1/4"2 1/4"
Elbow, Double Nut Thru-Hull
• Requires 1-1/2” mounting hole• Requires MA-040 or MA-049 Qwik-Lok socket
3 1/4"
1 5/8"
1/2"
3 1/4
"
2 1/4"
www.flow-rite.com 616-583-1700
1-1/
8”
Fit
tin
gs
1-1/8” Fittings
03/1528
3 7/8"
3"
Qwik-Lok Tee
• Combined with MA-040 and/or MA-049 sockets, is very versatile, offering numerous configurations
• Requires 1-1/2” mounting hole• Requires MA-040 and/or
MA-049 Qwik-Lok sockets
Thru-Hull, Double-ended QL with Flange and nut, Qwik-Lok, Black 4 3/8"1 5/8"
1/2"
2 1/4
"
Qwik-Lok Tee MA-047-QLB
Dbl. Thru-Hull MA-072-QLB
1/2” NPT x 1 1/8” QL MA-097
3/4” NPT x 1 1/8” QL MA-098
1” NPT x 1 1/8” QL MA-099
1-1/8” QL x 1/2” NPT
1-1/8” QL x 3/4” NPT
1-1/8” QL x 1” NPT
• Commonly used on positive displacement pumps
• Requires MA-040 or MA-049 Qwik-Lok socket
• Commonly used in wake ballast tanks and bags
• Requires MA-040 or MA-049 Qwik-Lok socket
• Commonly used in wake ballast tanks and bags
• Requires MA-040 or MA-049 Qwik-Lok socket
www.flow-rite.com 616-583-1700
www.flow-rite.com 616-583-1700
1-1/8” F
itting
s
1-1/8” Fittings
03/1529
Push-in Strainer
Push-in Drain Plug
• Stainless steel screen• O-ring seal
• Double O-ring design• Compatible with MA-041 and
MA-042 series thru-hulls
2"
2 3/8"
1/4"
1 1/4
"
1 1/2"
7/8
"
2"
Screw-in Drain Plug
Drain Screens, Plugs and Standpipes
Pipe Length Part #8 inches MA-STDP-0810 inches MA-STDP-1012 inches MA-STDP-1218 inches MA-STDP-18
Screw-in Drain Plug MA-050
Push-in Strainer MA-017
Push-in Drain Plug MA-045
Standpipe• Compatible with MA-043-QLB
and MA-044-QLB threaded thru-hulls
1-5/8"
See
Cha
rt
• Compatible with MA-043-QLB and MA-044-QLB threaded thru-hulls
• Features bleeder holes for draining without removal
1 1/4
"1 5/8"
1/2"
www.flow-rite.com 616-583-1700
Parts & Hardw
areA
ccessories
Accessories
31
Part
s &
Har
dwar
e
Accessories
Acc
esso
ries
03/1532
ProTimer™
ProTimer Plus+™
2-5/16”1-3/4”
2-1/4
”
2-5/16”3-5/8”
2-1/4
”
ProTimer MA-103ProTimer Plus+ MA-104
ProTimer & ProTimer Plus+
www.flow-rite.com 616-583-1700
ProTimer™ automatically turns your pump on and off for desired circulation and aeration. Set the ProTimer to the desired interval and concentrate on fishing. ProTimer conserves battery life, is easy to install and easy to operate. Can be connected to an existing switch in your boat (3 position, center off recommended).
ProTimer Plus+™ has all the features of ProTimer™, plus it comes with a master control switch to control on, off or timed livewell operation.
• 1 minute on with adjustable 1 to 12 minutes off.
• Includes 3 position rocker switch for off, timed or constant run (ProTimer Plus+™ only).
• For use with any livewell recirculation pump or Flow-Rite valve system with “RECIRC” mode.
• Automatic operation increases fishing time.
• Adjustable time delay feature to meet specific ambient conditions.
• Helps to increase battery life.
• Color coding promotes ease of operation.
• Helps keep fish healthy and stress free.
• Self-adhesive backing for easy installation; eliminates mounting screws.
• Weather resistant poly coated circuit board.
• Instructions included.
www.flow-rite.com 616-583-1700
Parts & Hardw
are
Accessories
Accesso
ries
03/1533
With today’s high performance hull designs, jack plates and larger outboards, putting a drain plug in or taking one out can be a very unpleasant task. The Flow-Rite Remote Drain Plug makes that job as simple as turning a switch.
Remote Drain Plug with 6’ Cable MA-RDP-006Remote Drain Plug with 8’ Cable MA-RDP-008Remote Drain Plug with 10’ Cable MA-RDP-010Plug End Assembly MA-RDP-1000Remote Drain Plug Actuator MC-1-D7-100Gasket MD-00209
• No more lying on a wet boat ramp to put in or take out a drain plug.
• Never worry about forgetting your drain plug again!
• Easily open or close your drain plug from your console.
• Easy to install on any fiberglass or aluminum hull with a 1” mounting hole.
• Fresh or saltwater use
Remote Drain Plug
www.flow-rite.com 616-583-1700
Part
s &
Har
dwar
e
Accessories
Acc
esso
ries
03/1534
Convert a standard cooler into a livewell with this simple coversion kit (cooler not included). Includes Tsunami 800GPH pump, PowerStream aerator, and all the pluming and fittings needed to create your own livewell at home. Requires cooler and battery to operate pump.
Install a Vortex between your high speed pickup and pump inlet to regulate incoming water pressure and flow. Vortex works at any boat speed without operator assistance. Vortex promotes maximum pump life in all applications and protects sensitive fish from excessive pressure in livewell and baitwell applications.
• No moving parts.
• Unrestricted flow path.
• For fresh and saltwater applications.
• Compatible with centrifugal aerator pumps.
• Compact size for ease of installation.
Cooler Conv. Kit MA-110
Vortex MA-V01
3 7/8"
2 5/
8"
Livewell / Cooler Conversion Kit
Vortex
www.flow-rite.com 616-583-1700
Parts & Hardw
are
Parts & Hardware
35www.flow-rite.com 616-583-1700
Part
s &
Har
dwar
e
Parts & Hardware
03/1536
U-Bracket MD-034L-Bracket MD-035
Single MD-DCL-016-WDouble MD-DCL-017-W
System 2 MD-LBL-012System 3 MD-LBL-013System 4 MD-LBL-014System 5 MD-LBL-015
Air-intake Tubing MD-055
Air-intake Assembly MD-012-B
• Used with MD-055 air-intake tubing to provide remote air to Power-Jet Venturi Aerator
• Intake hole is 3/16” hex key for installation convenience
• Compatible with Power-Jet Aerator domed decals.
• 3/16” I.D. clear PVC tubing for remote air-intake
• Used with Power-Jet Venturi Aerator and MA-012-B air-intake assembly
• Used to support valve / pump assembly
• Two 3/16” mounting holes
1 3/8"
5/8
"
3/4"
1/4"
Air-intake tubing, (order length in feet)
Air-intake Assembly
Mounting Brackets
Air Tubing and Accessories
Labels & Decals
Air intake Decals for Power-Jet Aerator
• Dome decal for use with Power-Jet aerator air intake
• White lettering on black
System Operation Labels• Operation instructions for the
Flow-Rite Llivewell control systems shown in the Valves overview
www.flow-rite.com 616-583-1700
www.flow-rite.com 616-583-1700
Parts & Hardw
are
Parts & Hardware
03/1537
Pump-Out Aerator Operation Label• Operation instructions for the
Pump-out aerator
Actuator Decals
POA Operation Label MD-LBL-004
3/4” Bezel MA-0651-1/8” Bezel MA-066
Fits PSA and PSN Aerator Heads MD-001Fits 3/4” Qwik-Lok Socket MD-014Fits 1-1/8” Qwik-Lok Socket MD-066
Upper DecalsSystem 1 MD-DCL-001-WHTSystem 2 MD-DCL-002-WHTSystem 3 MD-DCL-003-WHTSystem 4 MD-DCL-004-WHTSystem 5 MD-DCL-005-WHTBallast MD-DCL-026-WHT
Knob DecalsFlow-Rite Logo MD-DCL-010-WHT“LIVEWELL” MD-DCL-011-WHT“FRONT” MD-DCL-012-WHT“REAR” MD-DCL-013-WHT“STARBOARD” MD-DCL-014-WHT“PORT” MD-DCL-015-WHT
Chrome Bezels
O-Rings
• Chrome plated ABS bezels securely snap in place
• 3/4” bezel for use with MA-016 & MA-028 series thru-hulls
• 1-1/8” bezel for use with MA-063-QLB & MA-064-QLB thru-hulls
• Replacement o-rings for Flow-Rite parts
Replacement Parts
“FRONT”
FRONT
“Flow-Rite”
“STARBOARD”
STARBOARD
“REAR”
REAR
“LIVEWELL”
LIVEWELL
“PORT”
PORT
Ballast
STBD
BOTH
PORT
System 3
EMPTY
RECIRC AUTO
System 5
RECIRCPUMPOUT
System 4
FILL RECIRC
EMPTY
System 1
OPEN CLOSED
System 2
EMPTY AUTO
www.flow-rite.com 616-583-1700
Part
s &
Har
dwar
e
Parts & Hardware
03/1538
• Operation instructions for the Pump-out aerator.
O-ring Lube MD-123 Marine Sealant MD-00068 Crimping Tool MD-110
3/4” Hose (1 foot) MD-H061-1/8” Hose (1 foot) MD-H09
3/4” Marked Hose (1 foot) MD-H06M1-1/8” Marked Hose (1 foot) MD-H09M
3/4” Crimp Clamp MD-1301-1/8” Crimp Clamp MD-111
• Used for securing hose to Qwik-Lok sockets.
• Requires MD-110 Crimping tool.
Hose and Qwik-Lok Assembly Components
Our hose is made in USA with unmatched consistency in dimension and quality. This consistency ensures perfect fit to all Flow-Rite barb and Qwik-Lok components.
Marked Engineering hose is not only the most accurate, but the easiest method for the boat builder to establish precise hose lengths for a new or existing boat model. An invaluable tool and since it’s produced on our same computerized hose measuring, marking and cutting machine, all subsequent orders for a given length will be consistently accurate to match the length determined with the Marked Engineering Hose.
Marked Engineering Hose
Crimp Clamps
O-ring Lubricant Marine Sealant Crimping Tool(for MD-130 and MD-111 clamps)
Hose
www.flow-rite.com 616-583-1700
www.flow-rite.com 616-583-1700
Parts & Hardw
are
Parts & Hardware
03/1539
The two part adapter plate converts a 2 1/16” hole down to 1 – ¾” allowing boats equipped competitive systems to be upgraded to a Flow-Rite actuator.
• #6-32 x 1/2”, oval head, black oxide, stainless steel.
• Used for mounting of MA-010 Adapter Plate and original style cable actuators with tapered holes. See MD-093 for mounting of new style actuators
• #6-32 x 3/4”, truss head, black oxide, stainless steel.
• Used for mounting of cable actuator RK series
Miscellaneous Parts
Actuator Adapter Plate
Screws
Valve Repair Kit
ActuatorAdapter Plate MD-010
Valve Repair Kit MA-060
#6-32 x 1/2” MD-086#6-32 x 3/4” MD-093
A
K J
I H G
F
E D
C
C
B
A. Small O-ringB. Button flapper - 2 qty.C. Flapper - 2 qty.D. 6 x 5/16” sheet metal screwE. ArmF. 6 x 1/2” sheet metal screwG. LinkH. #6 x 1/2” machine screwI. ClampJ. #6-32 nut w/ insert K. Large O-ring
The valve repair kit includes 2 ea of the standard and button flappers that will provide enough to replace any requirement for V1, V2, V3 and V4 valves, with the exception of pre 1998 versions of V1; replace with new V1 valve. (See chart on reverse). The valve arm and link will not fit the older RCV-75 valves, but the standard flappers, O-rings and cable mounting bracket will fit all with the above mentioned exception.
Ballast Bag Flange
• Threaded flange for use in ballast bags• 1” NPT thread• O-ring seal ensures a water tight
connection• Must be welded in place
Ballast Bag Flange MA-116
3"
1"
www.flow-rite.com 616-583-1700
© 2015 Flow-Rite Controls®
Flow-Rite Controls960 74th Street SW
Byron Center, MI 49315p. (616) 583-1700 f. (616) 878-5151
www.flow-rite.com
Product names, logos, brands and other trademarks referred to within this publication are the property of their respective trademark holders.