marketing materials - nelson irrigation …...manage data share knowledge simply. connected. r5 the...
TRANSCRIPT
MKT MAT — 06/18
03063 QTY._____ BIG GUN BROCHURE(Specify Language)
03074 QTY._____800 SERIES VALVES(Specify Language)
03169 QTY._____R10/R10T(Specify Language)
03187 QTY._____ ACV Sales Sheet
03188 QTY._____ ACV Application Guide
03076 QTY._____TWIG WIRELESS CONTROLS PRICE LIST
03065 QTY._____ 1000 SERIES VALVES(Specify Language)
SolutionS for Mechanized irrigation
pivot point to end gun
NelsoN IrrIgatIoN CorporatIoN offers a full raNge of water applICatIoN solutIoNs for meChaNIzed IrrIgatIoN. from CoNtrol valves to pIvot sprINklers, aNd pressure regulators to eNd guNs — the paCkage Is Complete.
The S5 Spinner is meant to hang upside down. The barbed tubing inserts directly into HDPE pipe. Use a length of PVC pipe to keep the sprinkler hanging straight.
Inverted S5 SpinnerSprinkler Technology for the Future
S5-6 3/15
848 Airport Road, Walla Walla, Washington 99362 U.S.A. / Tel: +1 509.525.7660 / Fax: +1 509.525.7907 /nelsonirrigation.com
Nelson Irrigation Corporation / 848 Airport Road, Walla Walla, Washington 99362 U.S.A.Tel: +1 509.525.7660 / Fax: +1 509.525.7907 / [email protected] / nelsonirrigation.com
Use the S5 Spinner for irrigation in organic and conventional production where all pipe and sprin-klers are attached to the trellis wire and are thus up and out of the way of cultivation equipment. APPLICATIONS INCLUDE: tree fruit, vineyards, greenhouse and kiwi.
FEATURES:· Sealed bearing prevents stalling – even in conditions of blowing sand and dust.· Flow control nozzle options.· Can be applied to concentrate water application more heavily in the tree row with less being applied to the drive alley center.
NOW THERE IS A RELIABLE OPTION FOR A SPINNING SPRINKLER THAT HANGS IN AN INVERTED POSITION.
S5 SPINNER W/WINE PLATE
PRESSURE IN PSI PRESSURE IN BAR15 20 25 30 35 40 1.0 1.5 1.75 2.0 2.5 2.75
Nozzle Part # GPH R (ft.) GPH R (ft.) GPH R (ft.) GPH R (ft.) GPH R (ft.) GPH R (ft.) LPH R (m) LPH R (m) LPH R (m) LPH R (m) LPH R (m) LPH R (m)
#35 Orange 11826-235 9.5 10 10.5 10 11.4 10 12.1 10 36 3.0 39 3.0 44 3.0 46 3.0
#40 Blue 11826-240 9.3 9 10.8 10 12.2 10 13.3 11 14.4 11 15.5 11 43 3.0 46 3.0 49 3.4 56 3.4 59 3.4
#45 Purple 11826-245 11.7 10 13.7 10 15.4 11 16.8 11 18.2 11 19.6 11 44 3.0 54 3.0 59 3.4 63 3.4 67 3.4 74 3.4
#50 Green 11826-250 14.3 10 16.8 10 18.8 11 20.6 11 22.3 12 53 3.0 66 3.0 72 3.4 77 3.4 81 3.7
#55 Yellow 11826-255 17.4 10 20.3 11 22.8 11 25 12 65 3.0 80 3.4 87 3.4 93 3.7
8.5 Orange 5FC* 11826-209 * 10 * 9 * 9 * 8 * 3.0 * 2.7 * 2.7 * 2.4
11 Blue 5FC* 11826-211 * 10 * 11 * 10 * 9 * 9 * 3.0 * 3.4 * 3.0 * 2.7 * 2.7
14 Purple 5FC* 11826-214 * 10 * 10 * 11 * 11 * 11 * 11 * 3.0 * 3.0 * 3.4 * 3.4 * 3.4 * 3.4
18 Yellow 5FC* 11826-218 * 9 * 10 * 11 * 12 * 12 * 2.7 * 3.0 * 3.4 * 3.7 * 3.7
24 Red 5FC* 11826-224 * 9 * 11 * 12 * 13 * 2.7 * 3.4 * 3.7 * 4.0
*When using recommended pressures for a given plate and nozzle configuration, 5FC Flow Control Nozzles are flow regulating within a flow range of no more than 3% greater and 5% less than the nominal flow. 8.5 Orange 5FC nominal flow is 8.5 GPH (32 LPH), 11 Blue 5FC nominal flow is 11 GPH (42 LPH), 14 Purple 5FC nominal flow is 14 GPH (53 LPH), 18 Yellow 5FC nominal flow is 18 GPH (86 LPH), 24 Red 5FC nominal flow is 24 GPH (91 LPH).
FLOW & RADIUS IN U.S. & METRIC UNITS
1
pivot pocket guide
Nelson Irrigation Corporation offers a full range of water application solutions for mechanized irrigation. From control valves to pivot sprinklers, and pressure regulators to end guns — the package is complete.
nelsonirrigation.com
R10 & R10 Turbo
The R10 and R10 Turbo are part of the Nelson Rotator® family of sprinklers.
r10-11 U.S. & Metric
R5 R10 R10 Turbo R2000 R2000LP/WF 9 - 29 GPH 0.3 - 0.7 GPM 0.6 - 2.1 GPM 0.7 - 3.5 GPM 0.9 - 5.7 GPM 34 - 110 LPH 61 - 164 LPH 140 - 469 LPH 150 - 792 LPH 191 - 1295 LPH
AIR CONTROLSOLUTIONS
THE NELSON ACV200 PROVIDES ALL THREE TYPES OF AIR RELIEF: AIR RELIEF, VACUUM AIR RELIEF, AND CONTINUOUS AIR RELEASE UNDER PRESSURE.
TEL: +1 509.525.7660 — NELSONIRRIGATION.COM
Solutions for Mechanized Irrigation
END SPRINKLRES-2 1/16
END OF SYSTEM SPRINKLERS IN THE RANGE OF 40-70’ (12-21 M)
Today, irrigating valuable land in the corners of pivots provides quick pay-back. Nelson’s engineers are providing innovations to make this even easier and with improved performance.
R55
R75R55i(inverted)
Add PivotsManage DataShare Knowledge
Simply. Connected.
R5
The R5 is part of the Nelson Rotator® family of sprinklers.
R5-7US & METRIC
R5 R10 R10 TURBO R2000 R2000LP/WF 9 - 29 GPH 0.3 - 0.7 GPM 0.6 - 2.1 GPM 0.7 - 3.5 GPM 0.9 - 5.7 GPM 34 - 110 LPH 61 - 164 LPH 140 - 469 LPH 150 - 792 LPH 191 - 1295 LPH
A MICRO-SPRINKLER LIKE NO OTHER
PRELIMINARY S7 LIT - 2/25/18
15-50 PSI5.2-75 GPH
8-16’ RAD.
FLOW CONTROL OPTIONS & UNIQUE
QUICK-CONNECTQUICK-CLEAN
FEATURES
INTRODUCING THE NEW S7 SPINNER
NELSON IRRIGATION’S INNOVATIONS ARE TARGETED TO COMBAT RISING ENERGY AND LABOR COSTS. · Nelson’s Quick Clean (QC) technology reduces irrigator hours — simply turn, flush and reconnect. · Flow control nozzles are flow regulating at 15 PSI. · Insect protection helps prevent plugging or stalling. · Modular design allows quick and easy nozzle exchange. · Optional tree starter (break off) deflector tabs offer flexibility. · Optional PVC Stakes prevent tubing damage from coyotes and other animals.
THE S7 — A MICRO-SPRINKLER WITH A NEW LEVEL OF QUALITY, RELIABILTY AND DURABILITY
the originalBIG GUN® SPRINKLER
www.nelsonirrigation.com
EnglishBIG GUN 9/07
t
tWiG-1 10/16
Wireless ControlsI r r I gat I o n t e c h n o l o gy f o r t h e f u t u r e
TWIG ON VALVE
twigwirelesscontrols.com
THE PURPOSE OF THE NELSON WIRELESS CONTROL SYSTEM is to wirelessly and automatically cycle through a series of irrigation control valves in a programmed sequence. The TWIG® system is sophisticated, yet engineered for simplicity. The installation, set-up and operation is easy while the technology itself is protected from interference and complications.
®
03061 QTY._____ PIVOT POINT TO END GUN(Specify Language)
03166 QTY._____S5(Specify Language)
03174 QTY._____PIVOT POCKET GUIDE (Specify Language)
03167 QTY._____S7(Specify US/Metric & Language)
03073 QTY._____ TWIG WIRELESS CONTROLS(Specify Language)
03152 QTY._____ END OF PIVOT (R55/R75)(Specify Language)
03160 QTY._____PIVOTMAPPER
03165 QTY._____R5(Specify Language)
AGRICULTURE ENVIRONMENTAL GREEN INDUSTRY CROP SPECIFIC
JUNE 15, 2018 WGPL supersedes WGPL dated June 15, 2017. Prices subject to change without notice. Prices in US $.
IRRIGATION TECHNOLOGY FOR THE FUTURE
2018 WHOLE GOODS PRICE LIST
February 22, 2016 Price List. Prices subject to change without
notice. Prices in US dollars.
2016 LIST PRICES FOR 2” & 3” VALVES
ZONE CONTROL FOR SPRINKLER & DRIP IRRIGATION
ROW CROPS, NURSERY, TREE & VINE
PIVOT END GUN VALVE CONTROL
ENVIRONMENTAL CONTROL SYSTEMS
March 15, 2016 Price List. Prices subject to change without
notice. Prices in US dollars.
nelsonirrigation.com
AGRICULTURE ENVIRONMENTAL GREEN INDUSTRY CROP SPECIFIC
2018 PRODUCT CATALOG
IRRIGATION TECHNOLOGY FOR THE FUTURE
2018 MASTER NUMERICAL PARTS PRICE LIST JUNE 15, 2018 MNPPL supersedes MNPPL dated June 15, 2017. Prices subject to change without notice. Prices in US $.
IRRIGATION TECHNOLOGY FOR THE FUTURE
AGRICULTURE ENVIRONMENTAL GREEN INDUSTRY CROP SPECIFIC
List Prices January 17, 2017
Prices subject to change without notice.
Prices in US dollars.
t
Wireless ControlsPart Number Model Description of Controller List Price
11953-001TD200 Controller 110 VAC
Wireless TWIG Controller. Operates up to 100 TWIGs.110 VAC Power
$1364.00
11953-005TD200 Controller 12 VDC
12 Volt DC Power (order DC solar power kit separately. See below)
$1364.00
12647 TD200 Serial Cable Kit Connects 3rd Party Controller to TD200 $61.00
Part Number Model Description of TWIG Models List Price
11737-001 TWIG-1i WIRELESS TWIG WITH INTERNAL ANTENNAS. OPERATES ONE VALVE
$601.00
11737-002 TWIG-2i Operates up to two valves independent of each other. $682.00
11737-004 TWIG-4i Operates up to four valves independent of each other. $803.00
11737-005 TWIG-1iT TWIG 1 internal antenna for Single Control Tee Valve or Elbow $601.00
11737-006 TWIG-2iT TWIG 2 internal antenna for Dual Control Tee Valve $682.00
Order mounting bracket separately. See page 2.
12110-001 TWIG-1e WIRELESS TWIG FOR USE WITH EXTERNAL ANTENNA (SPECIAL ORDER) - OPERATES ONE VALVE
$601.00
12110-002 TWIG-2e Operates up to two valves independent of each other. $682.00
12110-004 TWIG-4e Operates up to four valves independent of each other. $803.00
(Two D-cell batteries are included with each TWIG unit)Order mounting bracket and antenna separately. See page 2.
ASSY-T FACTORY ASSEMBLY - MOUNT TWIG TO VALVE $75.00
CONTACT-TWIG, ASSEMBLY 4 LATCH CONTACTS IN CONTROL BOX
12246-001 Contact-TWIG D-cell Internal D-cell battery power $1308.00
12246-002 Contact-TWIG,12VDC 12 Volt DC power $1308.00
12246-003 Contact-TWIG, AC 110 Volt AC power $1308.00
Order external antenna separately See page 2. Mounting hardware not included.
REPEATER FOR EXTENDING COMMUNICATION DISTANCE
12025-001 TWIG-Repeater, AC 110 Volt AC Power $834.00
12025-002 TWIG-Repeater, DC 12 Volt DC Power $834.00
Order antenna separately. Order solar power kit separately. See below.
Part Number Model Description of Solar Kits List Price
12075-001Solar kit for TD200 with battery
10 WATT SOLAR KIT, 12VDC FOR TD200 AND CONTACT-TWIG, INCLUDES BATTERY IN BOX.
$884.00
12075-002Solar kit for Repeater with battery
10 WATT SOLAR KIT, 12VDC FOR REPEATER, INCLUDES BATTERY IN BOX.
$884.00
12224-001Solar kit for TD200 without battery
10 WATT SOLAR KIT, 12VDC FOR TD200, CHARGE CONTROLLER BOX INCLUDED
$632.00
12224-002Solar kit for Repeater without battery
10 WATT SOLAR KIT, 12VDC FOR REPEATER, CHARGE CONTROLLER BOX INCLUDED
$632.00
03066 QTY._____ WHOLE GOODS PRICE LIST
03067 QTY._____MASTER NUMERICALPARTS PRICE LIST
03075 QTY._____1000 SERIES VALVESPRICE LIST
03157 QTY._____CATALOG WITHOUTPRICING
LITERATURE
This is meant to be a visual reference guide of Nelson Irrigation marketing materials to be used by territory managers, dealers & distributors. Ideally we would like these orders to be placed directly into Webtools. If you are not set up to use Webtools and would like to please contact us. If necessary this document can be used as an order form by marking the quantity needed. Please submit to [email protected] with details on how to send. For translated documents please use language codes (FR, SP, AR, PT, RU) after the part number. Not all documents have been translated - if you have any special requests please let us know and we’ll do our best to fulfill them. Please note there is additional literature available but not entered into our ordering system (i.e. individual pivot sheets, Big gun Application sheets, etc.). If you find something on-line you would like printed please reference the code in the upper right corner. We have a separate parts list for technical sheets boxed with product. Contact us if you’d like this list.
MARKETING MATERIALS
03062-003 QTY._____NURSERY APPLICATIONS(Specify Language)
R33 & R33LPROTATOR® SPRINKLERS
Direct Replacements for 3/4” Brass Sprinklers
R33 (Gray Motor) Pressure: 40-65 PSI (2.75-4.5 BAR)Flow Range: 3.64-9.60 GPM (825-1935 LPH)Nozzles: 9/64”, 5/32”, 11/64”, 3/16” (3.6 mm, 4.0 mm, 4.4 mm, 4.8 mm)
R33LP (Purple Motor) for Low Pressure Pressure: 25-50 PSI (1.75-3.5 BAR)Flow Range: 2.88-8.45 GPM (659-1935 LPH)Nozzles: 9/64”, 5/32”, 11/64”, 3/16”, 13/64” (3.6 mm, 4.0 mm, 4.4 mm, 4.8 mm, 5.2 mm)
COMBINED R33 / R33LP PERFORMANCE (METRIC UNITS)
PERFORMANCE POCKET GUIDE
ROTATOR®
TECHNOLOGY
Save water, save energy and do a better job of irrigating.
®
nelSonirrigation.com
Nelson Irrigation Corp. 848 Airport Rd. Walla Walla, WA 99362-2271 USA Tel: 509.525.7660 Fax: 509.525.7907 E-mail: [email protected] Web site: www.nelsonirrigation.com
MINI REGULATOR, MINI REGULATORDRAIN CHECK & MINI DRAIN CHECK
MRDC-4
(flow not regulated)
(flow not regulated)
With adequate pressure, the MR and MRDC regulateto design pressure but the MDC is open fully and does not regulate.
(flow not regulated)
With low pressure, the MR is open, the MRDC and MDC are closed to draining.
With no pressure, the MR is open, the MRDC and MDC are closed to draining.
Mini Regulator (MR) For systems in which pressure ranges are
excessive, the Nelson Mini Regulator provides uniform
flow and distribution at each sprinkler through pressure regulation.
Choose from 20, 30, 35, 40, 45, or 50 PSI (1.4, 2.1, 2.4, 2.8, 3.1 or 3.4 BAR)
nominal pressures.
Mini Drain Check (MDC) The MDC is a check
valve only that opens 2-5 PSI (.14-.35 BAR) below the
nominal pressure rating. Available in 20 and 35 PSI (1.4-2.4 BAR) options. Ideal when a check feature only is
needed or when it is necessary to operate sprinklers at
different pressures that best suit environmental conditions.
Mini Regulator Drain Check (MRDC) To eliminate sprinkler drizzle
during shut down and start up and for pressure regulation use the Nelson
Mini Regulator Drain Check. Choose from 20, 30, 35,
40, 45, or 50 PSI (1.4, 2.1, 2.4, 2.8, 3.1 or 3.4 BAR)
nominal pressures.
Portable irrigation systems to eliminate crop wash out from partially pressurized sprinklers during system start up and shut down.
MDC or MRDC
Overhead cooling of apples and other crops to prevent drainage of the system in between frequent on / off cycles of the irrigation system.
MDC or MRDC
Greenhouse irrigation systems where sprinkler dripping or drainage after shut down cannot be tolerated.
MDC or MRDC
Systems where pressure gains or losses are high due to uneven topography or high friction loss in pipes to ensure high uniformity and even flow of all sprinklers in a system.
MR or MRDC
Gray Outlet Brown Outlet Green Outlet
03174 QTY._____R33(Specify Language)
03171 QTY._____MINI REGULATORS(Specify Language)
R2000
The R2000 is part of the Nelson Rotator® family of sprinklers.
r2000-12 tempU.S. Unit7/16
R5 R10 R10 TuRbo R2000 R2000LP/WF 9 - 29 GPH 0.3 - 0.7 GPM 0.6 - 2.1 GPM 0.7 - 3.5 GPM 0.9 - 5.7 GPM 34 - 110 LPH 61 - 164 LPH 140 - 469 LPH 150 - 792 LPH 191 - 1295 LPH
R2000 Windfighter
The R2000WF is part of the Nelson Rotator® family of sprinklers.
R5 R10 R10 TURBO R2000 R2000WF / LP 9 - 29 GPH 0.3 - 1.1 GPM 0.6 - 2.1 GPM 0.7 - 3.5 GPM 0.9 - 5.7 GPM 34 - 110 LPH 61 - 242 LPH 140 - 469 LPH 150 - 792 LPH 204 - 1295 LPH
R2000WF-TEMPU.S. & METRIC
WARRANTY AND DISCLAIMER: Nelson R2000WF Rotators are warranted for one year from the date of original sale to be free of defective material and workmanship when used within the working specifications for which the products were designed and under normal use and service. The manufacturer assumes no responsibility for installation, removal or unauthorized repair of defective parts and the manufacturer will not be liable for any crop or other consequential damages resulting from any defects or breach of warranty. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR PARTICULAR PURPOSES AND OF ALL OTHER OBLIGATIONS OR LIABILITIES OF MANUFACTURER. No agent, employee or representative of the manufacturer has authority to waive, alter or add to the provisions of this warranty nor to make any representations or warranty not contained herein. This product may be covered by one or more of the following U.S. Patent Numbers 4796811, RE33823, DES312865, 5058806, 5372307, 5875815 and other U.S. Patents pending or corresponding issued or pending foreign patents.
NELSON IRRIGATION CORPORATION 848 Airport Road, Walla Walla, WA 99362-2271, U.S.A.Tel: 509.525.7660 — Fax: 509.525.7907 [email protected] — www.nelsonirrigation.com NELSON IRRIGATION CORPORATION OF AUSTRALIA PTY LTD 35 Sudbury Street, Darra QLD 4074; P.O. Box 530, Sumner QLD 4074Tel: +61 7 3715 8555 — Fax: +61 7 3715 [email protected] www.nelsonirrigation.com.au
*All plate options are high angle. The performance data in this section has been recorded under ideal test conditions and may be adversely affected by poor hydraulic entrance conditions, slope, riser tilt, temperature, wind or other factors. Always be sure to use the nozzle size that is recommended for the plate. Always operate within the recommended pressure range. Only the nozzle and plate combinations grouped together in the above charts are recommended. Review motor/plate/nozzle combinations on page 2.
Mini Regulator (MR) — For systems in which pressure ranges are excessive, the Nelson Mini Regulator provides uniform flow and distribution at each R2000WF through pressure regulation. Choose from 40, 45, or 50 PSI (2.8, 3.1 or 3.4 BAR) nominal pressures.
Mini Regulator Drain Check (MRDC) — To eliminate sprinkler drizzle during shut down and start up and for pressure regulation use the Nelson Mini Regulator Drain Check. It is available in the same nominal pressures as the Mini Regulator.
Mini Drain Check (MDC) — The MDC is a check valve only that opens 2-5 PSI (.14-.35 BAR) below the nominal pressure rating. Available in 20 and 35 PSI (1.4-2.4 BAR) options. Ideal when a check feature only is needed or when it is necessary to operate the R2000WF at different pressures that best suit environmental conditions.
MRDCMR MDC
1/2” (1.25cm) FNPT or Female Acme Inlet for direct connection to PVC or threaded adapters
Male Acme Outlet
Plate Options
Recommended Nozzles
Model &Radius
PSI25 30 35 40 45 50 55 60 65
Dk. Blue #10#9306-078
R2000LPRad. 30-32’ 0.88 0.97 1.05 1.12 1.19 1.25 – – –
Nozzle/Body Assy.(5/64”) #9920-010
R2000WFRad. 33-35’ – – – 1.12 1.19 1.25 1.31 1.37 1.44
Orange #11#9306-086
R2000LPRad. 32-34’ 1.07 1.17 1.27 1.36 1.45 1.53 – – –
PURPLE WF12
#10452
Nozzle/Body Assy.(11/128”) #9920-011
R2000WFRad. 35-37’ – – – 1.36 1.45 1.53 1.61 1.68 1.76
Purple #12#9306-094
R2000LPRad. 33-35’ 1.27 1.39 1.50 1.61 1.70 1.80 – – –
Nozzle/Body Assy.(3/32”) #9920-012
R2000WFRad. 37-38’ – – – 1.61 1.70 1.80 1.89 1.98 2.06
Yellow #13#9306-102
R2000LPRad. 33-36’ 1.50 1.64 1.78 1.90 2.02 2.13 – – –
GREEN WF14#9877
Nozzle/Body Assy.(13/128”) #9920-013
R2000WFRad. 37-38’ – – – 1.90 2.02 2.13 2.23 2.34 2.45
Green #14#9306-109
R2000LPRad. 34-37’ 1.70 1.85 2.00 2.15 2.28 2.40 – – –
Nozzle/Body Assy.(7/64”) #9920-014
R2000WFRad. 38-40’ – – – 2.15 2.28 2.40 2.53 2.64 2.75
Tan #15#9306-117
R2000LPRad. 34-37’ 1.98 2.17 2.35 2.53 2.67 2.82 – – –
RED
WF16#9931
Nozzle/Body Assy.(15/128”) #9920-015
R2000WFRad. 39-41’ – – – 2.53 2.67 2.82 2.97 3.11 3.24
Red #16#9306-125
R2000LPRad. 36-38’ 2.28 2.50 2.70 2.89 3.07 3.23 – – –
Nozzle/Body Assy.(1/8”) #9920-016
R2000WFRad. 39-41’ – – – 2.89 3.07 3.23 3.40 3.54 3.68
Gold #18#9306-141
R2000LPRad. 38-39’ 2.92 3.20 3.44 3.68 3.89 4.11 – – –
Nozzle/Body Assy.(9/64”) #9920-018
R2000WFRad. 41-42’ – – – 3.68 3.89 4.11 4.30 4.48 4.66
Dk. Brown #20#9306-156
R2000LPRad. 40-42’ 3.56 3.90 4.18 4.48 4.76 5.00 – – –
Nozzle/Body Assy.(5/32”) #9920-020
R2000WFRad. 42-45’ – – – 4.48 4.76 5.00 5.25 5.47 5.69
US UNITSPlate/Nozzle Options and Flow Performance in Gallons Per Minute
9870
12113
9878
GOLD WF18
BLUE WF10
BRN. WF20
Plate Options
Recommended Nozzles
Model &Radius (m)
BAR1.75 2.0 2.75 3.0 3.5 4.0 4.5
Dk. Blue #10#9306-078
R2000LPRad. 9.1-9.8 201 217 254 266 286 – –
Nozzle/Body Assy.(5/64”) #9920-010
R2000WFR. 10.1-10.7 – – 254 266 286 306 328
Orange #11#9306-086
R2000LPR. 9.8-10.4 245 261 308 323 350 – –
PURPLE WF12
#10452
Nozzle/Body Assy.(11/128”) #9920-011
R2000WFR. 10.7-11.3 – – 308 323 350 375 401
Purple #12#9306-094
R2000LPR. 10.1-10.7 290 311 365 380 412 – –
Nozzle/Body Assy.(3/32”) #9920-012
R2000WFR. 11.3-11.6 – – 365 380 412 442 469
Yellow #13#9306-102
R2000LPR. 10.1-11.0 343 366 431 451 487 – –
GREEN WF14#9877
Nozzle/Body Assy.(13/128”) #9920-013
R2000WFR. 11.3-11.6 – – 431 451 487 521 558
Green #14#9306-109
R2000LPR. 10.4-11.3 389 413 487 509 550 – –
Nozzle/Body Assy.(7/64”) #9920-014
R2000WFR. 11.6-12.2 – – 487 509 550 590 626
Tan #15#9306-117
R2000LPR. 10.4-11.3 453 485 574 597 647 – –
RED
WF16#9931
Nozzle/Body Assy.(15/128”) #9920-015
R2000WFR. 11.9-12.5 – – 574 597 647 695 737
Red #16#9306-125
R2000LPR. 11.0-11.6 522 559 655 685 739 – –
Nozzle/Body Assy.(1/8”) #9920-016
R2000WFR. 11.9-12.5 – – 655 685 739 792 837
Gold #18#9306-141
R2000LPR. 11.6-11.9 668 716 834 869 940 – –
Nozzle/Body Assy.(9/64”) #9920-018
R2000WFR. 12.5-12.8 – – 834 869 940 1001 1060
Dk. Brown #20#9306-156
R2000LPR. 12.2-12.8 814 873 1016 1062 1144 – –
Nozzle/Body Assy.(5/32”) #9920-020
R2000WFR. 12.8-13.7 – – 1016 1062 1144 1222 1295
9870
12113
9878
GOLD WF18
BLUE WF10
BRN. WF20
METRIC UNITSPlate/Nozzle Options and Flow Performance in Liters Per Hour
03172 QTY._____R2000(Specify Language)
03173 QTY._____R2000WF(Specify Language)
03077 (US Units) QTY._____03077-001 (Metric) QTY._____ROTATOR POCKET GUIDE
This document is intended to assist in sprinkler choice and layout for irrigation in greenhouses, shade houses, and cold frames. Nelson sprinklers ideal for this application are the S5 Spinner, S10 Spinner, D10 Spray, R10TG Rotator® and R2000 Rotator®. Page 2 and 3 provide application suggestions for single structures up to 32 feet (9.8 M) wide. Page 4 provides solutions for multiple structures connected together which form large open areas wider than 32 feet (9.8 M).
D10 SPRAY0.54 - 5 GPM
128 - 1144 LPH
S10 SPINNER0.79 - 5 GPM
187 - 1144 LPH
R10TG ROTATOR®
1.27 - 5 GPM311 - 1144 LPH
R2000 ROTATOR®
0.67 - 3.54 GPM150 - 792 LPH
S10 SPINNERGreen Plate/Black Plate
24 Feet (7.3 m) or closer
R10TG ROTATORBlack Plate
24 Feet (7.3 m) or closer OR 24 Feet between sprinklers and 34 Feet (10.3 m) or closer between pipes
R10TG ROTATORGray Plate
22 Feet (6.7 m) or closer OR 22 Feet (6.7 m) between sprinklers and 34 Feet (10.3 m) or closer between pipes
GREENHOUSE OR SHADE HOUSE [structures more than 32 feet (9.8 M) wide]For large open covered areas with inverted or upright mounting.
NOTE: To achieve the expected high uniformity, the following is required: no obstruction, precise vertical sprinkler alignment, no wind conditions and regulated pressures.
S10 SPINNERGray Plate
24 Feet (7.3 m) or closer
R2000 ROTATOR9° or 12° Plate
35 Feet (10.7 m) or closer
INVERTEDMOUNT
Spacing Range
UPRIGHTMOUNT
Spacing Range
WIDTH OF HOUSE = MORE THAN 32 FEET (9.8 M) WIDE
S5 SPINNER — The S5 Spinner is a new spinning sprinkler for inverted applications. To install, insert the barb into a lateral poly tube and use a 6-8” piece of ½” schedule 40 PVC pipe as a weight. Use for small, single-row applications. The S5 has a radius of 9-13’ and operates at low pressures with low flow rates.
S10 SPINNER — The S10 Spinner provides a gentle rain-like distribution of water with excellent uniformity. It provides higher flow rate capacity allowing the use of high application rates.
D10 SPRAY — The D10 Spray has no moving parts. It is a long radius spray for irrigation and misting.
NELSON MANUFACTURES A VARIETY OF PRODUCTS THAT ARE IDEAL FOR NURSERY CROP IRRIGATION
R10TG, R2000, AND R2000WF ROTATORS® — Rotator® sprinklers provide the advantage of increased radius which allows coverage of a 30 foot greenhouse with a single row of sprinklers with the R10TG and higher uniformity in outdoor can yards.
PRESSURE REGULATORS — For pressure regulation at the beginning of an irrigation zone. Normally one is installed per greenhouse. The pressure regulator in effect evens flow from house to house which improves uniformity and allows more precise irrigation scheduling.
MINI REGULATOR DRAIN CHECK — The Mini Regulator Drain Check is installed one per sprinkler. It provides all the benefits of a pressure regulator and prevents dripping and drainage when the system is turned off.
WARRANTY AND DISCLAIMER: Nelson products are warranted for one year from the date of original sale to be free of defective material and workmanship when used within the working specifications for which the products were designed and under normal use and service. The manufacturer assumes no responsibility for installation, removal or unauthorized repair of defective parts and the manufacturer will not be liable for any crop or other consequential damages resulting from any defects or breach of warranty. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR PARTICULAR PURPOSES AND OF ALL OTHER OBLIGATIONS OR LIABILITIES OF MANUFACTURER. No agent, employee or representative of the manufacturer has authority to waive, alter or add to the provisions of this warranty nor to make any representations or warranty not contained herein. This product may be covered by one or more of the following U.S. Patent Numbers 4796811, RE33823, DES312865, 5058806, 5372307, 5875815 and other U.S. Patents pending or corresponding issued or pending foreign patents.
848 Airport Road, Walla Walla, Washington 99362 U.S.A.Tel: +1 509.525.7660 / Fax: +1 509.525.7907 [email protected] / nelsonirrigation.com
t
GREENHOUSE AP - 5/18
Greenhouse SprinklersApplication Guide
S5 SPINNER9.3 - 25 GPH36 - 93 LPH
Gray Plate 0º, Green Plate 7ºBlack Plate 24º
Wine Plate 5º See R2000 Brochurefor Plate Trajectories
Spray Plate 0º
AGRICULTURE
ENVIRONMENTAL
GREEN INDUSTRY
D E C E M B E R 2 0 1 3
ROTATOR® SPRINKLERS FOR SOLID SET/PERMANENT SETIRRIGATION
AGRICULTURE
ENVIRONMENTAL
GREEN INDUSTRY
D E C E M B E R 2 0 1 5
BIG GUN®
MAINTENANCEMANUAL
TD200
TWIG
TWIG
TWIG
REPEATER
Nelson Irrigation Corporation848 Airport Road, Walla Walla, Washington 99362 U.S.A.Tel: +1 509.525.7660 / Fax: +1 509.525.7907
nelsonirrigation.com
t
TWIG RESOURCE MANUAL - 5/15
Wireless Controls
ResouRce manualIncludes Certification Quick Quiz, Practice Exercises & Appendices
03177 QTY._____ROTATOR PRODUCTSMANUAL
03178 QTY._____BIG GUN MANUAL
03179 QTY._____TWIG RESOURCE MANUAL
Valve Resource Manual1 3 T H E D I T I O N
AGRICULTURE
ENVIRONMENTAL
GREEN INDUSTRY
03175 QTY._____800 SERIES VALVE MANUAL
03176 QTY._____1000 SERIES VALVEMANUAL
LITERATURE
TRAINING MANUALS
COUNTERMATS
The
Plate Options
Recommended Nozzles
Model &Radius
PSI25 30 35 40 45 50 55 60 65
GOLD 18 #10974-018
Gold #18 #11078-018(9/64”)
R33LPRad. 37-42’ 2.88 3.15 3.40 3.64 3.86 4.07 – – –
R33Rad. 43-44’ – – – 3.64 3.86 4.07 4.27 4.46 4.65
BROWN 20#10974-020
Brown #20 #11078-020(5/32”)
R33LPRad. 38-44’ 3.52 3.85 4.16 4.45 4.72 5.00 – – –
R33Rad. 45-47’ – – – 4.45 4.72 5.00 5.22 5.45 5.68
GRAY 22#10974-022
Gray #22 #11078-022 (11/64”)
R33LPRad. 39-44’ 4.24 4.64 5.02 5.37 5.70 6.01 – – –
R33Rad. 46-48’ – – – 5.37 5.7 6.01 6.3 6.57 6.83
GREEN 24 #10974-024
Green #24 #11078-024(3/16”)
R33LPRad. 41-46’ 5.00 5.50 5.96 6.38 6.78 7.16 – – –
R33Rad. 49-50’ – – – 6.38 6.78 7.16 7.52 7.85 8.18
MAROON 26#10974-026
Maroon #26#11078-026(13/64”)
R33LPRad. 43-47’ 5.90 6.50 7.05 7.55 8.00 8.45 – – –
R33 (Prelim.)
Rad. 46-51’ – – – 7.55 8.00 8.45 8.85 9.25 9.60
The Rotator® Family of Sprinklers and S5 Spinner
Plate/Nozzle Options and Flow Performance in Gallons Per Hour
PLATE
Green = 1Wine = 2Blue = 3
NOZZLE
#35 Orange #40 Blue #45 Purple #50 Green #55 Yellow
#9836-XXX (11261-XXX FOR POP-UP)
Recommended Pressure Range in PSI
Plate OptionsRecommended
NozzlesPSI
15 20 25 30 35 40
BLUE 6°Low Pressure
ModelUPRIGHT MOUNT
Radius 10-16’Stream Ht. 5-19”
#35 Orange 9.5 10.5 11.4 12.1
#40 Blue 10.8 12.2 13.3 14.4
#45 Purple 11.7 13.7 15.4 16.8 18.2
#50 Green 14.3 16.8 18.8 20.6 22.3
#55 Yellow 17.4 20.3 22.8 25.0
GREEN 9°High Pressure
ModelUPRIGHT MOUNT
Radius 12-19’Stream Ht. 18-33”
#35 Orange 10.5 11.4 12.1
#40 Blue 13.3 14.4 15.5
#45 Purple 15.4 16.8 18.2 19.6
#50 Green 18.8 20.6 22.3 23.9
#55 Yellow 22.8 25 27 29
WINE 5°INVERTED MOUNT
Radius 7-14’Stream Ht. 3-10”
#35 Orange 9.5 10.5 11.4 12.1
#40 Blue 10.8 12.2 13.3 14.4 15.5
#45 Purple 11.7 13.7 15.4 16.8 18.2
#50 Green 14.3 16.8 18.8 20.6
5FC Nozzle Option* BLUE GREEN WINE 8.5 GPH Orange 5FC 25-45 25-45
11 GPH Blue 5FC 20-45 30-45 15-45
14 GPH Purple 5FC 15-40 25-45 15-45
18 GPH Yellow 5FC 15-35 25-45 15-35
24 GPH Red 5FC 15-35 25-45 15-30
OR FLOW CONTROL:
8.5 (#9) GPH #11 GPH #14 GPH #18 GPH #24 GPH
See literature for notes on nozzle cleaning and flow control nozzles.
Plate/Nozzle Options and Flow Performance in Gallons Per Hour
NOZZLE
#35 Orange #40 Blue #45 Purple #50 Green #55 Yellow
#11826-2XX (SEE BELOW FOR ASSEMBLIES)
Plate Options
Recommended Nozzles
PSI15 20 25 30 35 40
WINE 5°INVERTED MOUNT
Radius 9-13’
#35 Orange 9.5 10.5 11.4 12.1
#40 Blue 9.3 10.8 12.2 13.3 14.4 15.5
#45 Purple 10.8 13.7 15.4 16.8 18.2 19.6
#50 Green 14.3 16.8 18.8 20.6 22.3
#55 Yellow 17.4 20.3 22.8 25.0
OR FLOW CONTROL:
8.5 (#9) GPH #11 GPH #14 GPH #18 GPH #24 GPH
CAP ASSEMBLY W/ PLATE
NOZZLE & BODY ASSY
COMPLETE ASSY LESS ADPTR
K16 10519-1106
8.3 10533-008 11991-0108FC 9223-085 11992-0108
K26 10519-1206
9 10533-009 11991-020910 10533-010 11991-0210FC 9223-100 11992-0210
K29 10519-1209
8.3 10533-008 11991-03089 10533-009 11991-030910 10533-010 11991-0310FC 9223-085 11992-0308FC 9223-100 11992-0310
K215 10519-1215
8.3 10533-008 11991-04089 10533-009 11991-040910 10533-010 11991-0410FC 9223-085 11992-0408FC 9223-100 11992-0410
K39 10519-1309
11 10533-011 11991-051112 10533-012 11991-0512FC 9223-125 11992-0512FC 9223-150 11992-0515
K315 10519-1315
11 10533-011 11991-061112 10533-012 11991-0612FC 9223-125 11992-0612FC 9223-150 11992-0615
K324 10519-1324
11 10533-011 11991-071112 10533-012 11991-0712FC 9223-125 11992-0712FC 9223-150 11992-0715
K46 10519-1406
13 10533-013 11991-081314 10533-014 11991-0814FC 9223-150 11992-0815FC 9223-200 11992-0820
K49 10519-1409
13 10533-013 11991-091314 10533-014 11991-0914FC 9223-150 11992-0915FC 9223-200 11992-0920
K412 10519-1412
13 10533-013 11991-101314 10533-014 11991-1014FC 9223-150 11992-1015FC 9223-200 11992-1020
K415 10519-1415
13 10533-013 11991-111314 10533-014 11991-1114FC 9223-150 11992-1115FC 9223-200 11992-1120
K424 10519-1424
13 10533-013 11991-121314 10533-014 11991-1214FC 9223-150 11992-1215FC 9223-200 11992-1220
K59 10519-1509
15 10533-015 11991-131516 10533-016 11991-1316FC 9223-250 11992-1325
K515 10519-1515
15 10533-015 11991-141516 10533-016 11991-1416FC 9223-250 11992-1425
K524 10519-1524
15 10533-015 11991-151516 10533-016 11991-1516FC 9223-250 11992-1525
Cap#9156
Diffuser (Black #9467, White #9544Gray #10294
Washer #9482
Motor
Plate
2T Body#9155
2TN Nozzle
Adapter#9316-002
O-ring#9307
R2000
NOZZ
LE
PLAT
E
CAP
ASSE
MBL
Y W
ITH
PLAT
ENO
ZZLE
& B
ODY
ASSE
MBL
Y
*Within the recommended
pressure range of 25-50 PSI, the 0.35, 0.43 and 0.50 10FC flow control nozzles are flow regulating within a flow range
of no more than 0% greater and 10% less
than their nominal flow (0.35, 0.43 and
0.50 GPM).
THREAD
1/2”= 1Acme = 2
PLATE
Red = 1White = 2Orange = 7
#9913-XXXXNOZZLE
Example:R10 Rotator® with 1/2” Thread (1), White Plate (2) and Red #60 Nozzle (60) = #9913-1260
Plate/Nozzle Options and Flow Performance in Gallons Per Minute
Plate OptionsRecommended
NozzlesPSI
25 30 35 40 45 50
P2 9° REDRadius 18-20'
Stream Ht. 14-23"
Lt. Blue #40#9306-040 – – 0.28 0.30 0.32 0.34
Lt. Purple #45#9306-045 0.29 0.32 0.35 0.37 0.39 0.42
Dk. Green #50#9306-050 0.36 0.39 0.43 0.46 0.48 0.51
0.35 10FC*0.43 10FC*
*Use #9587-xxx. Call factory for part numbers.
P4 9° WHITERadius 18-22'
Stream Ht. 13-23"
Dk. Green #50#9306-050 – – 0.43 0.46 0.48 0.51
Lt. Yellow #55#9306-055 0.44 0.48 0.52 0.55 0.59 0.62
Lt. Red #60#9306-060 0.51 0.56 0.61 0.65 0.69 0.73
0.50 10FC*
P4 15° ORANGERadius 23-27’
Stream Ht. 40-50”
Dk. Green #50#9306-050 – 0.39 0.43 0.46 0.48 0.51
Lt. Yellow #55#9306-055 – 0.48 0.52 0.55 0.59 0.62
Lt. Red #60#9306-060 – 0.56 0.61 0.65 0.69 0.73
0.50 10FC*
*Within the recommended
pressure ranges (see notations within the
table on the right), the 0.75 and 1.0 10FC
flow control nozzles are flow regulating within a flow range
of no more than 0% greater and 10% less
than their nominal flow (0.75 and 1.0
GPM), while the 1.25 and 1.5 10FC are flow
regulating within a flow range of no more than 3.5% greater and
8% less than their nominal flow (1.25
and 1.5 GPM).
THREAD
1/2”= 1Acme = 2
PLATE
Blue = 3Purple = 4Brown = 5Gold = 6
#9914-XXXXNOZZLE
Example:R10T Rotator® with Acme Thread (2), Purple Plate (4) and Blue #10 Nozzle (78) = #9914-2478
Plate/Nozzle Options and Flow Performance in Gallons Per Minute
Plate OptionsRecommended
NozzlesPSI
25 30 35 40 45 50
P6 9° BLUERadius 20-22'
Stream Ht. 17-30"
P6 15° PURPLERadius 24-27’
Stream Ht. 31-49”
Gray #8.3#9306-065 0.61 0.67 0.72 0.77 0.82 0.86
White #9#9306-070 0.70 0.77 0.83 0.89 0.94 1.00
Dk. Blue #10#9306-078 0.88 0.97 1.05 1.12 1.19 1.25
0.75 10FC*1.0 10FC*
*Use #9587-xxx. Call factory for part numbers. Recommended pressure range for 0.75 10FC is 25-50 PSI, while the pressure range for the 1.0 10FC is 30-50 PSI.
P8 15° GOLDRadius 28-31'
Stream Ht. 38-58"
P8 24° BROWNRadius 27-32’
Stream Ht. 67-99”
Orange #11#9306-086 1.07 1.17 1.27 1.36 1.45 1.53
Purple #12#9306-094 1.27 1.39 1.50 1.61 1.70 1.80
Yellow #13#9306-102 1.50 1.64 1.78 1.90 2.02 2.13
1.25 10FC*1.5 10FC*
Recommended pressure range for 1.25 and 1.5 10FC is 30-50 PSI.
Additional Nozzles P8 24° Plate only:
Dk. Blue #10#9306-0781.0 10FC*
– 0.97 1.05 1.12 1.19 1.25
R10TR10R5
S5
Plate/Nozzle Options and Flow Performance in Gallons Per Minute
Cap#9156-001
Diffuser(Green #11142,
Purple #9898, Red #10716)
Washer #9482
Motor (Purple, Ivory,
or Green)
Plate
Bearing#9895
Body w/ Bearing #9920
Body#9155-001
2TN Nozzle
Adapterwith O-ring#9316-002
O-ring#9307
Plate Options
Recommended Nozzles
Model &Radius
PSI25 30 35 40 45 50 55 60 65
Dk. Blue #10#9306-078
R2000LPRad. 30-32’ 0.88 0.97 1.05 1.12 1.19 1.25 – – –
Nozzle/Body Assy.(5/64”) #9920-010
R2000WFRad. 33-35’ – – – 1.12 1.19 1.25 1.31 1.37 1.44
Orange #11#9306-086
R2000LPRad. 32-34’ 1.07 1.17 1.27 1.36 1.45 1.53 – – –
PURPLE WF12
#10452
Nozzle/Body Assy.(11/128”) #9920-011
R2000WFRad. 35-37’ – – – 1.36 1.45 1.53 1.61 1.68 1.76
Purple #12#9306-094
R2000LPRad. 33-35’ 1.27 1.39 1.50 1.61 1.70 1.80 – – –
Nozzle/Body Assy.(3/32”) #9920-012
R2000WFRad. 37-38’ – – – 1.61 1.70 1.80 1.89 1.98 2.06
Yellow #13#9306-102
R2000LPRad. 33-36’ 1.50 1.64 1.78 1.90 2.02 2.13 – – –
GREEN WF14#9877
Nozzle/Body Assy.(13/128”) #9920-013
R2000WFRad. 37-38’ – – – 1.90 2.02 2.13 2.23 2.34 2.45
Green #14#9306-109
R2000LPRad. 34-37’ 1.70 1.85 2.00 2.15 2.28 2.40 – – –
Nozzle/Body Assy.(7/64”) #9920-014
R2000WFRad. 38-40’ – – – 2.15 2.28 2.40 2.53 2.64 2.75
Tan #15#9306-117
R2000LPRad. 34-37’ 1.98 2.17 2.35 2.53 2.67 2.82 – – –
RED
WF16#9931
Nozzle/Body Assy.(15/128”) #9920-015
R2000WFRad. 39-41’ – – – 2.53 2.67 2.82 2.97 3.11 3.24
Red #16#9306-125
R2000LPRad. 36-38’ 2.28 2.50 2.70 2.89 3.07 3.23 – – –
Nozzle/Body Assy.(1/8”) #9920-016
R2000WFRad. 39-41’ – – – 2.89 3.07 3.23 3.40 3.54 3.68
Gold #18#9306-141
R2000LPRad. 38-39’ 2.92 3.20 3.44 3.68 3.89 4.11 – – –
Nozzle/Body Assy.(9/64”) #9920-018
R2000WFRad. 41-42’ – – – 3.68 3.89 4.11 4.30 4.48 4.66
Dk. Brown #20#9306-156
R2000LPRad. 40-42’ 3.56 3.90 4.18 4.48 4.76 5.00 – – –
Nozzle/Body Assy.(5/32”) #9920-020
R2000WFRad. 42-45’ – – – 4.48 4.76 5.00 5.25 5.47 5.69
9870
12113
9878
GOLD WF18
BLUE WF10
BRN. WF20
FULLY ASSEMBLED SPRINKLER LESS ADAPTER
COMPLETER2000WF CAP & BODY ASSY
WF MOTOR COLOR
COMPLETER2000LP CAP & BODY ASSY
LPMOTOR COLOR
10 10 9928-1010 Purple 9929-1010 Green
1211 9928-1211 Ivory 9929-1211 Green
12 9928-1212 Ivory 9929-1212 Green
1413 9928-1413 Ivory 9929-1413 Purple
14 9928-1414 Ivory 9929-1414 Purple
1615 9928-1615 Ivory 9929-1615 Purple
16 9928-1616 Ivory 9929-1616 Purple
18 18 9928-1818 Ivory 9929-1818 Purple
20 20 9928-2020 Ivory 9929-2020 Purple
NOZZ
LEPL
ATE
The R20000WF / LP have been designed to be easily repaired. Use these charts to determine the recommended plate, nozzle, motor and diffuser combinations when making repairs, or changing nozzle size.
R2000WF/LPNelson Irrigation Corporation recommends that the R33 & R33LP be stocked and purchased as a full assembly. Please order all other parts for the purpose of repairs only.
Cap#11030
Diffuser (Greeen #11342,
Gray #10973)
Retainer #11039
Motor (Gray for R33,
Purple for R33LP)
Plate
Bearing#11077
Body
#11076
Nozzle
Adapter w/ O-ring#11344 O-ring
#11343
ASSEMBLED R33 CAP, BODY &
ADAPTER
ASSEMBLED R33 CAP, BODY (NO
ADAPTER)
18 11466-1018 11336-018
20 11466-1020 11336-020
22 11466-1022 11336-022
24 11466-1024 11336-024
26 11466-1026 11336-026
PLAT
E &
NOZZ
LE
ASSEMBLED R33LP CAP, BODY
& ADAPTER
ASSEMBLED R33LP CAP, BODY
(NO ADAPTER)
18 11466-1118 11336-118
20 11466-1120 11336-120
22 11466-1122 11336-122
24 11466-1124 11336-124
26 11466-1126 11336-126
PLAT
E &
NOZZ
LE
Plate/Nozzle Options and Flow Performance in Gallons Per Minute
R33LP/R33FLUSH TOOL
R33LP/R33ROAD GUARD
FEMALE ACME X PVC SOCKET OR SPIGOT
(Short) #11161-001; (Long) #11161-002Disconnect and reconnect sprinkler for nozzle clean-ing while under pressure.
#11363 Snap on R33LP/R33 to convert to part-circle operation.
#12214-001For detachable risers.¾” Female Acme x ¾”PVC Socket or 1” PVCSpigot
R33LP/R33 ACCESSORIES
R33/R33LP
R2000(WF) FLUSH TOOL
R2000(WF) HIGH- ANGLE ROAD GUARD
#9210Disconnect and reconnect sprinkler for nozzle cleaning while under pressure.
#12213-001Snap on new style R2000(WF) to convert to part-circle opera-tion (190°).
*Within the recommended pressure range of 30-60 PSI, the 2000FC flow control nozzles are flow regulating within a flow range of no more than 3.5% greater and 8% less than their nominal flow.
Plate OptionsRadius &
Stream Height Recommended
NozzlesPSI
30 35 40 45 50 55 60K1 6° Cream#9516-106
Rad. 21-25’ Str. Ht. 15-25”
Gray #8.3#9306-065 0.67 0.72 0.77 0.82 0.86 0.90 0.94
0.85 2000FC*
K2 6° Lt. Blue #9516-206
Rad. 22-26’ Str. Ht. 15-32”
White #9#9306-070 0.77 0.83 0.89 0.94 1.00 1.05 1.10
Dk. Blue #10#9306-078 0.97 1.05 1.12 1.19 1.25 1.31 1.37
1.0 2000FC*
K2 9° Green#9516-209
Rad. 23-27’ Str. Ht. 18-37”
Gray #8.3#9306-065 0.67 0.72 0.77 0.82 0.86 0.90 0.94
K2 15° Yellow#9516-215
Rad. 27-30’ Str. Ht. 31-55”
White #9#9306-070 0.77 0.83 0.89 0.94 1.00 1.05 1.10
Dk. Blue #10#9306-078 0.97 1.05 1.12 1.19 1.25 1.31 1.37
0.85 2000FC* & 1.0 2000FC*
K3 9° Brown#9516-309
Rad. 25-28’ Str. Ht. 19-33”
Orange #11#9306-086 1.17 1.27 1.36 1.45 1.53 1.61 1.68
K3 15° Red#9516-315
Rad. 27-31’ Str. Ht. 38-63”
Purple #12#9306-094 1.39 1.50 1.61 1.70 1.80 1.89 1.98
K3 24° Gray#9516-324
Rad. 29-35’ Str. Ht. 68-103”
1.25 2000FC*1.5 2000FC*
K4 6° Turquoise#9516-406
Rad. 21-25’ Str. Ht. 10-24”
Yellow # 13#9306-102 1.64 1.78 1.90 2.02 2.13 2.23 2.34
K4 9° Purple#9516-409
Rad. 26-32’ Str. Ht. 28-42”
Green #14#9306-109 1.85 2.00 2.15 2.28 2.40 2.53 2.64
K4 12° Wine#9516-412
Rad. 27-31’ Str. Ht. 32-51”
1.5 2000FC*2.0 2000FC*
K4 15° Gold#9516-415
Rad. 27-33’ Str. Ht. 40-60”
K4 24° Black#9516-424
Rad. 28-36’ Str. Ht. 65-100”
K5 9° Orange#9516-509
Rad. 27-31’ Str. Ht. 25-42”
Tan #15#9306-117 2.17 2.35 2.53 2.67 2.82 2.97 3.11
K5 15° Tan#9516-515
Rad. 31-36’ Str. Ht. 36-49”
Dk. Red #16#9306-125 2.50 2.70 2.89 3.07 3.23 3.40 3.54
K5 24° Blue#9516-524
Rad. 32-37’ Str. Ht. 76-104”
2.5 2000FC*
Plate/Nozzle Options and Flow Performance in Gallons Per Minute
*When using recommended pressures for a given plate and nozzle configuration, 5FC Flow Control Nozzles are flow regulating within a flow range of no more than 3% greater and 5% less than the nominal flow. 8.5 Orange 5FC nominal flow is 8.5 GPH, 11 Blue 5FC nominal flow is 11 GPH, 14 Purple 5FC nominal flow is 14 GPH, 18 Yellow 5FC nominal flow is 18 GPH, 24 Red 5FC nominal flow is 24 GPH.
Recommended Pressure Range in PSI5FC Nozzle Option* WINE 8.5 GPH Orange 5FC 25-40
11 GPH Blue 5FC 20-40
14 GPH Purple 5FC 15-40
18 GPH Yellow 5FC 15-35
24 GPH Red 5FC 15-30
4 mm Flexible PVC Feedtube & LTO, 4 mm Barb Assembly#9960-912 — 12” (30.5 cm)#9960-918 — 18” (48 cm) #9960-924 — 24” (61 cm)
PVC Pipe Weight Required(Dealer Supplied)
LTO, Barb x Barb
#11258 PVC Stake Adapter (Gray) — 4 mm
COMPLETE ASSEMBLIES INCLUDE: 4 mm tubing, LTO & 11258 adapter
#12422-012 — 12” Assembly#12422-018 — 18” Assembly#12422-024 — 24” Assembly
PVC Pipe Weight (not included)
FT-04 Stake Assembly
NELSONIRRIGATION.COM
The
The Rotator® Family of Sprinklers and S5 Spinner
Plate/Nozzle Options and Flow Performance in Gallons Per Hour
NOZZLE
#35 Orange #40 Blue #45 Purple #50 Green #55 Yellow
#11826-2XX (SEE bELOw fOr aSSEmbLiES)
Plate Options
Recommended Nozzles
bar1.0 1.5 1.75 2.0 2.5 2.75
wiNE 5°iNverted mOuNt
radius 9-13’
#35 Orange 36 39 44 46
#40 blue 43 46 49 56 59
#45 Purple 44 54 59 63 67 74
#50 Green 53 66 72 77 81
#55 Yellow 65 80 87 93
Or fLOw CONtrOL:
8.5 (#9) GPH #11 GPH #14 GPH #18 GPH #24 GPH
*When using recommended pressures for a given plate and nozzle configuration, 5FC Flow Control Nozzles are flow regulating within a flow range of no more than 3% greater and 5% less than the nominal flow. 8.5 Orange 5FC nominal flow is 32 LPH, 11 Blue 5FC nominal flow is 42 LPH, 14 Purple 5FC nominal flow is 53 LPH, 18 Yellow 5FC nominal flow is 86 LPH, 24 red 5FC nominal flow is 91 LPH.
Recommended Pressure Range in bar5fC Nozzle Option* wiNE 8.5 GPH Orange 5FC 1.75-3.0
11 GPH blue 5FC 1.0-3.0
14 GPH Purple 5FC 1.0-3.0
18 GPH Yellow 5FC 1.0-2.5
24 GPH red 5FC 1.0-2.0
4 mm Flexible PvC Feedtube & LtO, 4 mm Barb Assembly#9960-912 — 30.5 cm#9960-918 — 48 cm #9960-924 — 61 cm
PvC Pipe Weight required(dealer Supplied)
LtO, Barb x Barb
#11258 PvC Stake Adapter (Gray) — 4 mm
COmPLete ASSemBLieS iNCLude: 4 mm tubing, LtO & 11258 adapter
#12422-012 — 31 cm Assembly#12422-018 — 46 cm Assembly#12422-024 — 61 cm Assembly
PvC Pipe Weight (not included)
FT-04 Stake Assembly
nelsonirrigation.com.au
Plate Options
Recommended Nozzles
Model &Radius (m)
BAR1.75 2.0 2.75 3.0 3.5 4.0 4.5
Dk. Blue #10#9306-078
R2000LPRad. 9.1-9.8 201 217 254 266 286 – –
Nozzle/Body Assy.(5/64”) #9920-010
R2000WFR. 10.1-10.7 – – 254 266 286 306 328
Orange #11#9306-086
R2000LPR. 9.8-10.4 245 261 308 323 350 – –
PuRPle wF12
#10452
Nozzle/Body Assy.(11/128”) #9920-011
R2000WFR. 10.7-11.3 – – 308 323 350 375 401
Purple #12#9306-094
R2000LPR. 10.1-10.7 290 311 365 380 412 – –
Nozzle/Body Assy.(3/32”) #9920-012
R2000WFR. 11.3-11.6 – – 365 380 412 442 469
Yellow #13#9306-102
R2000LPR. 10.1-11.0 343 366 431 451 487 – –
GReeN wF14#9877
Nozzle/Body Assy.(13/128”) #9920-013
R2000WFR. 11.3-11.6 – – 431 451 487 521 558
Green #14#9306-109
R2000LPR. 10.4-11.3 389 413 487 509 550 – –
Nozzle/Body Assy.(7/64”) #9920-014
R2000WFR. 11.6-12.2 – – 487 509 550 590 626
Tan #15#9306-117
R2000LPR. 10.4-11.3 453 485 574 597 647 – –
ReD
wF16#9931
Nozzle/Body Assy.(15/128”) #9920-015
R2000WFR. 11.9-12.5 – – 574 597 647 695 737
Red #16#9306-125
R2000LPR. 11.0-11.6 522 559 655 685 739 – –
Nozzle/Body Assy.(1/8”) #9920-016
R2000WFR. 11.9-12.5 – – 655 685 739 792 837
Gold #18#9306-141
R2000LPR. 11.6-11.9 668 716 834 869 940 – –
Nozzle/Body Assy.(9/64”) #9920-018
R2000WFR. 12.5-12.8 – – 834 869 940 1001 1060
Dk. Brown #20#9306-156
R2000LPR. 12.2-12.8 814 873 1016 1062 1144 – –
Nozzle/Body Assy.(5/32”) #9920-020
R2000WFR. 12.8-13.7 – – 1016 1062 1144 1222 1295
Plate/Nozzle Options and Flow Performance in Liters per Hour
Cap#9156-001
diffuser(Green #11142,
Purple #9898, red #10716)
Washer #9482
motor (Purple, ivory,
or Green)
Plate
Bearing#9895
Body w/ Bearing #9920
Body#9155-001
2tN Nozzle
Adapterwith O-ring#9316-002
O-ring#9307
9870
12113
9878
GOlD wF18
Blue wF10
BRN. wF20
FULLY ASSEMBLED SPRINKLER LESS ADAPTER
COMPLETER2000WF CAP & BODY ASSY
WF MOTOR COLOR
COMPLETER2000LP CAP & BODY ASSY
LPMOTOR COLOR
10 10 9928-1010 Purple 9929-1010 Green
1211 9928-1211 Ivory 9929-1211 Green
12 9928-1212 Ivory 9929-1212 Green
1413 9928-1413 Ivory 9929-1413 Purple
14 9928-1414 Ivory 9929-1414 Purple
1615 9928-1615 Ivory 9929-1615 Purple
16 9928-1616 Ivory 9929-1616 Purple
18 18 9928-1818 Ivory 9929-1818 Purple
20 20 9928-2020 Ivory 9929-2020 Purple
NOZZ
LEPL
ATE
the r20000WF / LP have been designed to be easily repaired. use these charts to determine the recommended plate, nozzle, motor and diffuser combinations when making repairs, or changing nozzle size.
R2000wF/lP
r2000(wf) fLuSh tOOL
r2000(wf) hiGh- aNGLE rOad Guard
#9210disconnect and reconnect sprinkler for nozzle cleaning while under pressure.
#12213-001Snap on new style r2000(WF) to convert to part-circle opera-tion (190°).
Nelson irrigation Corporation recommends that the r33 & r33LP be stocked and pur-chased as a full assembly. Please order all other parts for the purpose of repairs only.
Cap#11030
diffuser (Greeen #11342,
Gray #10973)
retainer #11039
motor (Gray for r33,
Purple for r33LP)
Plate
Bearing#11077
Body
#11076
Nozzle
Adapter w/ O-ring#11344 O-ring
#11343
ASSEMBLED R33 CAP, BODY &
ADAPTER
ASSEMBLED R33 CAP, BODY (NO
ADAPTER)
18 11466-1018 11336-018
20 11466-1020 11336-020
22 11466-1022 11336-022
24 11466-1024 11336-024
26 11466-1026 11336-026
PLAt
e &
NOZZ
Le
ASSEMBLED R33LP CAP, BODY
& ADAPTER
ASSEMBLED R33LP CAP, BODY
(NO ADAPTER)
18 11466-1118 11336-118
20 11466-1120 11336-120
22 11466-1122 11336-122
24 11466-1124 11336-124
26 11466-1126 11336-126
PLAt
e &
NOZZ
Le
R33/R33lP
r33LP/r33fLuSh tOOL
r33LP/r33rOad Guard
fEmaLE aCmE X PVC (1” Or ¾”)
(Short) #11161-001; (Long) #11161-002disconnect and reconnect sprinkler for nozzle clean-ing while under pressure.
#11363 Snap on r33LP/r33 to convert to part-circle operation.
#12214For detachable risers.
R33lP/R33 ACCeSSORIeS
Plate/Nozzle Options and Flow Performance in Liters per Hour
Plate OptionsRecommended
NozzlesModel &
Radius (m)BAR
1.75 2.0 2.5 2.75 3.0 3.5 4.0 4.5
GOlD 18 #10974-018
Gold #18 #11078-018(9/64”)
R33LPR. 11.3-12.8 659 703 786 825 862 931 — —
R33R. 13.1-13.4 — — — 825 862 931 996 1058
BROwN 20#10974-020
Brown #20 #11078-020(5/32”)
R33LPR. 11.6-13.4 805 859 961 1009 1054 1143 — —
R33R. 13.7-14.3 — — — 1009 1054 1143 1217 1293
GRAY 22#10974-022
Gray #22 #11078-022 (11/64”)
R33LPR. 11.9-13.4 970 1036 1160 1218 1272 1375 — —
R33R. 14.0-14.6 — — — 1218 1272 1375 1468 1554
GReeN 24 #10974-024
Green #24 #11078-024(3/16”)
R33LPR. 12.5-14.0 1144 1227 1378 1447 1513 1639 — —
R33R. 14.9-15.2 — — — 1447 1513 1639 1753 1862
MAROON 26#10974-026
Maroon #26#11078-026(13/64”)
R33LPR. 13.1-14.3 1350 1449 1630 1712 1786 1933 — —
R33 (Prelim.)R. 14.9-15.5 — — — 1712 1786 1933 2065 2184
Plate/Nozzle Options and Flow Performance in Liters per Hour
PLatE
Green = 1Wine = 2Blue = 3
NOZZLE
#35 Orange #40 Blue #45 Purple #50 Green #55 Yellow
#9836-XXX (11261-XXX fOr POP-uP)
5fC Nozzle Option* bLuE GrEEN wiNE 8.5 GPH Orange 5FC 1.75-3.0 — 1.75-3.0
11 GPH blue 5FC 1.5-3.0 2.0-3.0 1.0-3.0
14 GPH Purple 5FC 1.0-2.75 1.75-3.0 1.0-3.0
18 GPH Yellow 5FC 1.0-2.5 1.75-3.0 1.0-2.5
24 GPH red 5FC 1.0-2.5 1.75-3.0 1.0-2.0
Or fLOw CONtrOL:
8.5 (#9) GPH #11 GPH #14 GPH #18 GPH #24 GPH
See literature for notes on nozzle cleaning and flow control nozzles.
caP assemBlY W/ Plate
noZZle & BoDY assY
comPlete assY less aDPtr
K16 10519-1106
8.3 10533-008 11991-0108FC 9223-085 11992-0108
K26 10519-1206
9 10533-009 11991-020910 10533-010 11991-0210FC 9223-100 11992-0210
K29 10519-1209
8.3 10533-008 11991-03089 10533-009 11991-030910 10533-010 11991-0310FC 9223-085 11992-0308FC 9223-100 11992-0310
K215 10519-1215
8.3 10533-008 11991-04089 10533-009 11991-040910 10533-010 11991-0410FC 9223-085 11992-0408FC 9223-100 11992-0410
K39 10519-1309
11 10533-011 11991-051112 10533-012 11991-0512FC 9223-125 11992-0512FC 9223-150 11992-0515
K315 10519-1315
11 10533-011 11991-061112 10533-012 11991-0612FC 9223-125 11992-0612FC 9223-150 11992-0615
K324 10519-1324
11 10533-011 11991-071112 10533-012 11991-0712FC 9223-125 11992-0712FC 9223-150 11992-0715
K46 10519-1406
13 10533-013 11991-081314 10533-014 11991-0814FC 9223-150 11992-0815FC 9223-200 11992-0820
K49 10519-1409
13 10533-013 11991-091314 10533-014 11991-0914FC 9223-150 11992-0915FC 9223-200 11992-0920
K412 10519-1412
13 10533-013 11991-101314 10533-014 11991-1014FC 9223-150 11992-1015FC 9223-200 11992-1020
K415 10519-1415
13 10533-013 11991-111314 10533-014 11991-1114FC 9223-150 11992-1115FC 9223-200 11992-1120
K424 10519-1424
13 10533-013 11991-121314 10533-014 11991-1214FC 9223-150 11992-1215FC 9223-200 11992-1220
K59 10519-1509
15 10533-015 11991-131516 10533-016 11991-1316FC 9223-250 11992-1325
K515 10519-1515
15 10533-015 11991-141516 10533-016 11991-1416FC 9223-250 11992-1425
K524 10519-1524
15 10533-015 11991-151516 10533-016 11991-1516FC 9223-250 11992-1525
Cap#9156
diffuser (Black #9467, White #9544Gray #10294
Washer #9482
motor
Plate
2t Body#9155
2tN Nozzle
Adapter#9316-002
O-ring#9307
R2000
NOZZ
LE
PLAT
E
CAP
ASSe
mBL
Y W
itH
PLAt
eNO
ZZLe
& B
OdY
ASSe
mBL
Y
*Within the recommended
pressure range of 1.75-3.5 bar the
0.35 and 0.50 10FC flow control nozzles are flow regulating within a flow range
of no more than 0% greater and
10% less than their nominal flow
(1.4 and 1.9 LPH).
thrEad
1/2”= 1Acme = 2
PLatE
red = 1White = 2Orange = 7
#9913-XXXXNOZZLE
Example:r10 rotator® with 1/2” thread (1), White Plate (2) and red #60 Nozzle (60) = #9913-1260
Plate/Nozzle Options and Flow Performance in Liters per Hour
*Within the recommended
pressure ranges (see notations within the
table on the right), the 0.75 and 1.0 10FC
flow control nozzles are flow regulating within a flow range
of no more than 0% greater and 10% less
than their nominal flow (2.8 and 4.0
LPH), while the 1.25 and 1.5 10FC are flow
regulating within a flow range of no more than 3.5% greater and
8% less than their nominal flow (4.7 and
5.7 LPH).
thrEad
1/2”= 1Acme = 2
PLatE
Blue = 3Purple = 4Brown = 5Gold = 6
#9914-XXXXNOZZLE
Example:r10t rotator® with Acme thread (2), Purple Plate (4) and Blue #10 Nozzle (78) = #9914-2478
Plate/Nozzle Options and Flow Performance in Liters per Hour
R10TR10R5
Plate/Nozzle Options and Flow Performance in Liters per Hour
Plate OptionsRecommended
NozzlesBAR
1.0 1.25 1.50 1.75 2 2.25 2.5 2.75
bLuE 6°Low Pressure
modeluPriGHt mOuNtradius 3.0-4.9 m
Strm. Ht. 10.2-48.3 cm
#35 Orange 36 39 42 44 46
#40 blue 43 46 49 53 56
#45 Purple 44 49 54 59 63 67 70
#50 Green 53 60 66 72 77 81 86
#55 Yellow 65 73 80 87 93
GrEEN 9°High Pressure
modeluPriGHt mOuNtradius 3.7-5.8 m
Strm. Ht. 45.7-83.8 cm
#35 Orange 39 42 44 46
#40 blue 49 53 56 59
#45 Purple 59 63 67 70 74
#50 Green 72 77 81 86 91
#55 Yellow 87 93 99 104 110
wiNE 5°iNverted mOuNt
radius 2.1-4.3 mStrm. Ht. 7.6-25.4 cm
#35 Orange 36 39 42 44 46
#40 blue 43 46 49 53 56 59
#45 Purple 44 49 54 59 63 67 70
#50 Green 53 60 66 72 77
Recommended Pressure Range in BAR
Plate OptionsRecommended
NozzlesBAR
1.75 2.0 2.5 3.0 3.5
P2 9° ReDRadius
5.5-6.1 m
Stream Ht. 35.6-58.4 cm
Lt. Blue #40#9306-040 — — 64.7 71.3 77.9
Lt. Purple #45#9306-045 66.4 71.3 80.6 87.2 96.4
Dk. Green #50#9306-050 82.3 87.2 99.4 108 117
0.35 10FC* *use #9587-xxx. Call factory for part numbers.
P4 9° wHITeRadius
5.5-6.7 m
Stream Ht. 33.0-58.4 cm
Dk. Green #50#9306-050 — — 99.4 108 117
Lt. Yellow #55#9306-055 101 107 120 131 142
Lt. Red #60#9306-060 117 125 141 154 167
0.50 10FC*
P4 15° ORANGeRadius
7.0-8.2 m
Stream Ht. 102-127 cm
Dk. Green #50#9306-050 — 87.2 99.4 108 117
Lt. Yellow #55#9306-055 — 107 120 131 142
Lt. Red #60#9306-060 — 125 141 154 167
0.50 10FC*
Plate OptionsRecommended
NozzlesBAR
1.75 2.0 2.5 3.0 3.5
P6 9° BlueRadius 6.1-6.7 m
Stream Ht. 43.2-76.2 cm
P6 15° PuRPleRadius 7.6-8.2 m
Stream Ht. 78.7-124.5 cm
Gray #8.3#9306-065 140 150 166 183 197
White #9#9306-070 160 172 192 210 229
Dk. Blue #10#9306-078 201 217 242 266 286
0.75 10FC*1.0 10FC*
*use #9587-xxx. Call factory for part numbers. recommended pressure range for 0.75 10FC is 1.4-3.5 bar, while the pressure range for the 1.0 10FC is 2.1-3.5 bar.
P8 15° GOlDRadius 8.5-9.1 m
Stream Ht. 97-145 cm
P8 24° BROwNRadius 8.2-9.8 m
Stream Ht. 163-251 cm
Orange #11#9306-086 245 261 294 323 350
Purple #12#9306-094 290 311 347 380 412
Yellow #13#9306-102 343 366 411 451 487
1.25 10FC*1.5 10FC*
recommended pressure range for 1.25 and 1.5 10FC is 2.1-3.5 bar.
Additional Nozzles P8 24° Plate only:
Dk. Blue #10#9306-0781.0 10FC*
— 217 242 266 286
*Within the recommended pressure range of 2.0-4.0 bar, the 2000FC flow control nozzles are flow reg-ulating within a flow range of no more than 3.5% greater and 8% less than their nominal flow.
Plate OptionsRadius &
Stream Height Recommended
NozzlesBAR
2.0 2.5 3.0 3.5 4.0K1 6° Cream#9516-106
Rad. 6.4-7.6 m Str. Ht. 38.1-63.5 cm
Gray #8.3#9306-065 150 166 183 197 210
0.85 2000FC*
K2 6°Lt. Blue #9516-206
Rad. 6.7-7.9 mStr. Ht. 38.1-81.3 cm
White #9#9306-070 172 192 210 229 245
Dk. Blue #10#9306-078 217 242 266 286 306
1.0 2000FC*
K2 9° Green#9516-209
Rad. 7.0-8.2 mStr. Ht. 46-94 cm
Gray #8.3#9306-065 150 166 183 197 210
K2 15° Yellow#9516-215
Rad. 8.2-9.1 m Str. Ht. 79-140 cm
White #9#9306-070 172 192 210 229 245
Dk. Blue #10#9306-078 217 242 266 286 306
0.85 2000FC* & 1.0 2000FC*
K3 9° Brown#9516-309
Rad. 7.6-8.5 mStr. Ht. 48-84 cm
Orange #11#9306-086 261 294 323 350 375
K3 15° Red#9516-315
Rad.8.2-9.4 mStr. Ht. 97-160 cm
Purple #12#9306-094 311 347 380 412 442
K3 24° Gray#9516-324
Rad. 8.8-10.7 mStr. Ht. 173-262 cm
1.25 2000FC*1.5 2000FC*
K4 6° Turquoise#9516-406
Rad. 6.4-7.6 mStr. Ht. 25-61 cm
Yellow # 13#9306-102 366 411 451 487 521
K4 9° Purple#9516-409
Rad. 7.9-9.8 mStr. Ht. 71-107 cm
Green #14#9306-109 413 463 509 550 590
K4 12° Wine#9516-412
Rad. 8.2-9.4 mStr. Ht. 81-130 cm
1.5 2000FC*2.0 2000FC*
K4 15° Gold#9516-415
Rad. 8.2-10.1 mStr. Ht. 102-152 cm
K4 24° Black#9516-424
Rad. 8.5-11.0 mStr. Ht. 165-254 cm
K5 9° Orange#9516-509
Rad. 8.2-9.4 mStr. Ht. 64-107 cm
Tan #15#9306-117 485 544 597 647 695
K5 15° Tan#9516-515
Rad. 9.4-11.0 mStr. Ht. 91-124 cm
Dk. Red #16#9306-125 559 624 685 739 792
K5 24° Blue#9516-524
Rad. 9.8-11.3 mStr. Ht. 193-264 cm
2.5 2000FC*
S5
03155-001 QTY._____ROTATOR FAMILY OF SPRINKLERS (US) - 36” X 24” 03155-002 QTY._____ROTATOR FAMILY OF SPRINKLERS (METRIC) - 36” X 24”
03155-003 QTY._____ROTATOR FAMILY OF SPRINKLERS (NICA) - 36” X 24”
03056-002 QTY._____ROTATOR TECHNOLOGY REIGNS - 28” x 20”
03056-001 QTY._____END OF PIVOT SOLUTIONS - 28” x 20”
03048 - 3030 BANNER - 6’ x 2’ (SPECIFY LANGUAGE) QTY._____
03052-001 - 3030 SERIES QTY._____ (SPECIFY LANGUAGE)
03068 - NELSON - 2’ X 1’ Metal QTY._____ 03069 QTY._____Genuine Nelson Parts 8.5” x 8.5” Metal
03055-001 - BIG GUN QTY._____ (SPECIFY LANGUAGE)
03012 - NELSON BANNER - 6’ x 2’ QTY._____
03154-002 - LEPA BANNER - 6’ x 2’ QTY._____
03072-001 - BIG GUN BANNER - 6’ x 2’ QTY._____
03151-004 - TWIG BANNER - 6’ x 2’ QTY._____
03154-001 - R2OOOWF WINDFIGHTER - 6’ x 2’ QTY._____
03154-003 - 1000 SERIES VALVES BANNER - 6’ x 2’ QTY._____
part-circle rOtatOr®high unifOrmity in
real-wOrld cOnditiOns
nelsonirrigation.com
rOtatOr® sprinKler with mini drain checK
FOR A WIDER DOME OF WATER & INCREASED EFFICIENCY IN LOW ENERGY/PRECISION APPLICATIONS USE THE D3030 WITH TAN “BUBBLE-WIDE” PLATE.
gERMINATEIRRIgATEcHEMIgATEbubblEdRAg
u3030+ hose drag
spRAyOR ORbITINgspRINKlERs
d3030sprayhead
bubblerMode WIThsprInkler
converTer
spray Mode WIThsprInkler
converTer
acceleraTor Mode WIThsprInkler
converTer
MOVINgspRINKlERs:ROTATORAccElERATORspINNER
a3030acceleraTor
lesa
low Energy/Elevation spray Application
lepa
low Energy/Elevation precision Application
lena
low Energy/Elevation nelson advanTage
DURABLE & RELIABLE WITH ENGINEERED
SIMPLICITY
THE LEADER IN QUALITY, PERFORMANCE & SUPPORT
®
THE PREFERRED CHOICE FOR TOUGH APPLICATIONS
Multi-Function3NV Nozzle
3030 series
press spin click
�Side inlet —easy & reliable way to install & re-nozzle
�“OFF” OptiOn — Better water management and maintenance
�nOzzle FluSh — easiest nozzle cleaning on the market
TD200
TWIG
TWIG
TWIG
REPEATER
Simply connect TWIGs to Nelson Control Valves and couple with the TD200 Controller to automate new or existing drip, solid set or permanent set installations.
TM
Precision manufactured for heavy-duty reliability.
sprinkler technology
Water Application Solutions for nelson irrigation corporation
High Volume Irrigation
www.nelsonirrigation.comWalla Walla, Washington U.S.A.
Tel: +1 509.525.7660
the originalBIG GUN® SPRINKLER
BANNERS POSTERS
SIGNS
DISPLAYS03151 Air Control Valve - Plastic 03070 3030 Sample Box - Complete Product Line03047-001 3030 Corn - Large Metal Display03047-002 3030 Potato - Large Metal Display03047-003 3030 Cotton LEPA - Large Metal Display03156-002 3030 Corn Sample Box - Plastic Stand03156-001 3030 Potato Sample Box - Plastic Stand03156-003 3030 LEPA Sample Box - Plastic Stand03156-004 3030 Midwest Sample Box - Plastic Stand03049-001 Orchard - WA (Tree Fruit) - Metal 03049-002 Orchard - CA (Tree Nut) - Metal 03050-001 Nursery - Metal 03051-001 Row Crop - (R2000WF + PC) - Metal 03051-002 Row Crop - (R2000WF + R33) - Metal
03151
03070
03047-001