marwell corporation po box 139 mentone ca 92359 (909) 794-4192 fax (909) 794-0250 marwell...

WWW.MARWELLCORP.COM PO BOX 139 MENTONE CA 92359 (909) 794-4192 FAX (909) 794-0250

MARWELL CORPORATIONManufacturer of UL Listed Meter Socket Adapters

Consult Factory for Pricing and Availability.

Extender Adapters, Angle Adapters, 1000-0-R Series, 1000-R Series,

1002-R Series, 1800-R Series

Blue Section

http://WWW.MARWELLCORP.COM





ORDERING INFORMATION Part # 1000-0-R-320

Marwell Corporation newest Meter Socket Extender Adapter. !

Marwell’s new heavy duty constructed bus bar and jaw assembly are rated 400A Max, 320A continuous.

!Designed for use in higher amperage meter sockets up to 400A

Max. Tested to UL 414 Standards, rated for 600V. !

In house UL 414 heat rise test available from Marwell. !

400 AMP RATED EXTENDER ADAPTER






Angle Adapters

UL LISTED E/Z-200 4 jaw applications

E/Z-500 5 & 6 jaw applications E/Z-800 7 & 8 jaw applications

E/Z-200

E/Z-800E/Z-500

MODEL JAWS AMP MAX. - CONT. METER FORM UL LISTED E/Z 200 4 200A - 175A 2S YES E/Z 500 6 200A - 175A 3, 4, & 12S -- E/Z 800 8 200A - 175A 5, 14, 15, & 16S --

NOTE: ADAPTER IS REVERSIBLE FOR LEFT OR RIGHT VIEWING. ADDERS: DEAD FRONT OPTION “ -DF “

APPLICATION: TYPICALLY USED TO ALLOW METER READING FROM SIDE YARD. PACKAGE: SHIPPED IN PACKAGES OF FOUR. !

Patented, Mighty-Bite jaw design. Fits ring and ringless meter sockets.

Fits self contained or transformer rated. Grounding system standard on all models.

70 degree viewing angle. May be installed LEFT or RIGHT

UL Listed, proprietary blend, fiberglass reinforced polycarbonate housing. jaw model is UL LISTED.



Patented, Mighty-Bite jaw design. UL Listed, proprietary blend, fiberglass reinforced polycarbonate housing.

Fits ring and ringless meter sockets. Grounding system standard on all models.

2-3/4 inch meter offset. Most models are UL LISTED, all component parts are UL Recognized.




E/Z 1000-0 SERIES EXTENDER ADAPTERS

1000-0-R SERIES 2-3/4 INCH OFFSET

DEAD FRONT OPTION AVAILABLE

MODEL JAWS AMP MAX. - CONT. VOLTAGE RATING UL LISTED E/Z 1000-0-R4 4 250A - 200A 600V YES E/Z 1000-0-R5 5 250A - 200A 600V YES E/Z 1000-0-R6 6 CT RATED 600V YES E/Z 1000-0-R7 7 200A - 175A 600V YES E/Z 1000-0-R8 8 CT RATED 600V YES E/Z 1000-0-R13 13 CT RATED 600V -- NOTE: JAW TENSION REDUCED FOR 30 AMP CT RATED APPLICATIONS OPTIONS: NC-300 10-32 TERMINAL SCREWS ON BUS BAR(S), SPECIFY FL-300 1/4” FAST TAB TERMINALS ON BUS BAR(S), SPECIFY 1/2 KO CONDUIT HOLE 1/2 INCH (.88), SPECIFY LOCATION 3/4 KO CONDUIT HOLE 3/4 INCH (1.06), SPECIFY LOCATION 1 KO CONDUIT HOLE 1 INCH (1.25), SPECIFY LOCATION COUPLER COUPLES ADAPTER TO BOX ENCLOSURE - SPECIFY COUPLER

APPLICATION: TYPICALLY USED TO INSTALL DEVICES AT THE METER SOCKET THAT WERE NOT ORIGINALLY

INTENDED. MAY BE USED TO CONNECT CONDUIT FOR METER DATA ACCESS.






E/Z 1000 SERIES EXTENDER ADAPTERS

1000-R SERIES 3-3/4 INCH OFFSET





MODEL JAWS AMP MAX. - CONT. VOLTAGE RATING UL LISTED E/Z 1000-R4 4 200A - 175A 600V YES E/Z 1000-R5 5 200A - 175A 600V -- E/Z 1000-R6 6 CT RATED 600V -- E/Z 1000-R7 7 200A - 175A 600V -- E/Z 1000-R8 8 CT RATED 600V -- E/Z 1000-R13 13 CT RATED 600V -- NOTE: JAW TENSION REDUCED FOR 30 AMP CT RATED APPLICATIONS OPTIONS: NC-300 10-32 TERMINAL SCREWS ON BUS BAR(S), SPECIFY FL-300 1/4” FAST TAB TERMINALS ON BUS BAR(S), SPECIFY 1/2 KO CONDUIT HOLE 1/2 INCH (.88), SPECIFY LOCATION 3/4 KO CONDUIT HOLE 3/4 INCH (1.06), SPECIFY LOCATION 1 KO CONDUIT HOLE 1 INCH (1.25), SPECIFY LOCATION COUPLER COUPLES ADAPTER TO BOX ENCLOSURE - SPECIFY COUPLER









1002-R Series 4-3/4 inch offset





MODEL JAWS AMP MAX. - CONT. VOLTAGE RATING UL LISTED E/Z 1002-R4 4 200A - 175A 600V YES E/Z 1002-R5 5 200A - 175A 600V -- E/Z 1002-R6 6 CT RATED 600V -- E/Z 1002-R7 7 200A - 175A 600V -- E/Z 1002-R8 8 CT RATED 600V -- E/Z 1002-R13 13 CT RATED 600V -- NOTE: JAW TENSION REDUCED FOR 30 AMP CT RATED APPLICATIONS OPTIONS: NC-300 10-32 TERMINAL SCREWS ON BUS BAR(S), SPECIFY FL-300 1/4” FAST TAB TERMINALS ON BUS BAR(S), SPECIFY 1/2 KO CONDUIT HOLE 1/2 INCH (.88), SPECIFY LOCATION 3/4 KO CONDUIT HOLE 3/4 INCH (1.06), SPECIFY LOCATION 1 KO CONDUIT HOLE 1 INCH (1.25), SPECIFY LOCATION COUPLER COUPLES ADAPTER TO BOX ENCLOSURE - SPECIFY COUPLER









1800 SERIES 1800 = 3-3/4 inch offset

1800-1 = 4-3/4 inch offset 1800-2 = 5-3/4 inch offset


MODEL JAWS OFFSET AMP MAX. - CONT. VOLTAGE RATING UL LISTED E/Z 1800-4 4 3-3/4 200A - 175A 600V YES E/Z 1800-5 5 3-3/4 200A - 175A 600V YES E/Z 1800-6 6 3-3/4 CT RATED 600V YES E/Z 1800-7 7 3-3/4 200A - 175A 600V YES E/Z 1800-8 8 3-3/4 CT RATED 600V YES E/Z 1800-13 13 3-3/4 CT RATED 600V -- ----------------------------------------------------------------------------------------------------------------------------------------------------------- E/Z 1800-1-4 4 4-3/4 200A - 175A 600V YES E/Z 1800-1-5 5 4-3/4 200A - 175A 600V YES E/Z 1800-1-6 6 4-3/4 CT RATED 600V YES E/Z 1800-1-7 7 4-3/4 200A - 175A 600V YES E/Z 1800-1-8 8 4-3/4 CT RATED 600V YES E/Z 1800-1-13 13 4-3/4 CT RATED 600V --

Patented, Mighty Bite jaw design. UL Listed, proprietary blend, fiberglass reinforced polycarbonate housing.

Fits ringless meter sockets, mounts oversize equipment to meter socket. Grounding system standard on all models.

UL Recognized components. !APPLICATION: Typically used to install oversized devices into ringless meter sockets that were not

originally intended. May be used to connect conduit for meter data access.






E/Z 1800 SERIES EXTENDER ADAPTERS1800 Series

1800-2 5-3/4 inch offset

MODEL JAWS OFFSET AMP MAX. - CONT. VOLTAGE RATING UL LISTED E/Z 1800-2-4 4 5-3/4 200A - 175A 600V YES E/Z 1800-2-5 5 5-3/4 200A - 175A 600V YES E/Z 1800-2-6 6 5-3/4 CT RATED 600V YES E/Z 1800-2-7 7 5-3/4 200A - 175A 600V YES E/Z 1800-2-8 8 5-3/4 CT RATED 600V YES E/Z 1800-2-13 13 5-3/4 CT RATED 600V YES

SEALABLE LATCH SCREW

3 LATCHES SHOWN

RETRACTED

How does it work? The 1800 Series adapter provides a simple method of mounting an enclosed instrument such as a box type cell phone, to an adapter and mounting the

complete assembly, as a unit, into a ringless socket. The ringless socket cover is placed over the empty

meter socket and the 1800 adapter is inserted in the socket through the meter hole. The 3 latches are extended behind the meter cover with the screw

latches. The complete assembly will be securely held in place by the latches. The latches may be sealed.



marwell corporation po box 139 mentone ca 92359 (909) 794-4192 fax (909) 794-0250 marwell...

Documents